summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/i915_trace.h
AgeCommit message (Collapse)AuthorFilesLines
2018-06-11drm/i915/ringbuffer: Fix context restore upon resetChris Wilson1-33/+0
The discovery with trying to enable full-ppgtt was that we were completely failing to the load both the mm and context following the reset. Although we were performing mmio to set the PP_DIR (per-process GTT) and CCID (context), these were taking no effect (the assumption was that this would trigger reload of the context and restore the page tables). It was not until we performed the LRI + MI_SET_CONTEXT in a following context switch would anything occur. Since we are then required to reset the context image and PP_DIR using CS commands, we place those commands into every batch. The hardware should recognise the no-ops and eliminate the expensive context loads, but we still have to pay the cost of using cross-powerwell register writes. In practice, this has no effect on actual context switch times, and only adds a few hundred nanoseconds to no-op switches. We can improve the latter by eliminating the w/a around known no-op switches, but there is an ulterior motive to keeping them. Always emitting the context switch at the beginning of the request (and relying on HW to skip unneeded switches) does have one key advantage. Should we implement request reordering on Haswell, we will not know in advance what the previous executing context was on the GPU and so we would not be able to elide the MI_SET_CONTEXT commands ourselves and always have to emit them. Having our hand forced now actually prepares us for later. Now since that context and mm follow the request, we no longer (and not for a long time since requests took over!) require a trace point to tell when we write the switch into the ring, since it is always. (This is even more important when you remember that simply writing into the ring bears no relation to the current mm.) v2: Sandybridge has to agree to use LRI as well. Testcase: igt/drv_selftests/live_hangcheck Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180611110845.31890-1-chris@chris-wilson.co.uk
2018-06-05drm/i915/gtt: Rename i915_hw_ppgtt base memberChris Wilson1-2/+2
In the near future, I want to subclass gen6_hw_ppgtt as it contains a few specialised members and I wish to add more. To avoid the ugliness of using ppgtt->base.base, rename the i915_hw_ppgtt base member (i915_address_space) as vm, which is our common shorthand for an i915_address_space local. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180605153758.18422-1-chris@chris-wilson.co.uk
2018-06-05drm/i915/trace: Context field needs to be 64-bit wideTvrtko Ursulin1-10/+10
Underlaying field is u64 so the tracepoint needs to be as well. v2: * Re-order binary packet for 64-bit alignment. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180605134124.25672-1-tvrtko.ursulin@linux.intel.com
2018-06-05drm/i915/trace: Remove engine out of the context sandwichTvrtko Ursulin1-15/+15
In the string tracepoint representation we ended up with the engine sandwiched between context hardware id and context fence id. Move the two pieces of context data together for redability. Binary records are left as is, that is both fields remaing under the existing name and ordering. v2: * Do not consolidate the printk format, just reorder. (Lionel) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525082642.18246-2-tvrtko.ursulin@linux.intel.com
2018-06-05drm/i915/trace: Describe engines as class:instance pairsTvrtko Ursulin1-42/+65
Instead of using the engine->id, use uabi_class:instance pairs in trace- points including engine info. This will be more readable, more future proof and more stable for userspace consumption. v2: * Use u16 for class and instance. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: svetlana.kukanova@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525082642.18246-1-tvrtko.ursulin@linux.intel.com
2018-05-18drm/i915: Move request->ctx asideChris Wilson1-5/+5
In the next patch, we want to store the intel_context pointer inside i915_request, as it is frequently access via a convoluted dance when submitting the request to hw. Having two context pointers inside i915_request leads to confusion so first rename the existing i915_gem_context pointer to i915_request.gem_context. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-1-chris@chris-wilson.co.uk
2018-05-08drm/i915: Remove unused i915_flip tracepointsChris Wilson1-36/+0
The i915_flip* tracepoints are no longer in use since the removal of CS flip in commit 8b5d27b911d7 ("drm/i915: Remove intel_flip_work infrastructure") References: 8b5d27b911d7 ("drm/i915: Remove intel_flip_work infrastructure") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180508151552.31024-1-chris@chris-wilson.co.uk
2018-05-04drm/i915: Include priority and completed status in request in/out tracepointsTvrtko Ursulin1-35/+58
It is useful to see the priority as requests are coming in and completed status as requests are coming out of the GPU. To achieve this in a more readable way we need to abandon the common request_hw tracepoint class. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180504115643.22437-1-tvrtko.ursulin@linux.intel.com
2018-02-21drm/i915: Rename drm_i915_gem_request to i915_requestChris Wilson1-65/+63
We want to de-emphasize the link between the request (dependency, execution and fence tracking) from GEM and so rename the struct from drm_i915_gem_request to i915_request. That is we may implement the GEM user interface on top of requests, but they are an abstraction for tracking execution rather than an implementation detail of GEM. (Since they are not tied to HW, we keep the i915 prefix as opposed to intel.) In short, the spatch: @@ @@ - struct drm_i915_gem_request + struct i915_request A corollary to contracting the type name, we also harmonise on using 'rq' shorthand for local variables where space if of the essence and repetition makes 'request' unwieldy. For globals and struct members, 'request' is still much preferred for its clarity. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180221095636.6649-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-12-18drm/i915/trace: add hw_id to gem requests trace pointsLionel Landwerlin1-14/+22
When monitoring the GPU with i915 perf, reports are tagged with a hw id. Gem context creation tracepoints already have a hw_id field, unfortunately you only get this correlation between a process id and a hw context id once when the context is created. It doesn't help if you started monitoring after the process was initialized or if the drm fd was transfered from one process to another. This change adds the hw_id field to gem requests, so that correlation can also be done on submission. v2: Place hw_id at the end of the tracepoint to not disrupt too much existing tools (Chris) v3: Reorder hw_id field again (Chris) v4: Add missing hw_id to i915_gem_request_wait_begin tracepoint (Chris) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171218151959.14073-3-lionel.g.landwerlin@intel.com
2017-12-18drm/i915: reorder field in gem_request tracepointsLionel Landwerlin1-2/+2
Let's make the order of the fields of the tracepoints involving gem request match across i915. This makes userspace processing of tracepoint a bit easier. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171218151959.14073-2-lionel.g.landwerlin@intel.com
2017-11-15Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-78/+40
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.15. Core: - Atomic object lifetime fixes - Atomic iterator improvements - Sparse/smatch fixes - Legacy kms ioctls to be interruptible - EDID override improvements - fb/gem helper cleanups - Simple outreachy patches - Documentation improvements - Fix dma-buf rcu races - DRM mode object leasing for improving VR use cases. - vgaarb improvements for non-x86 platforms. New driver: - tve200: Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. New bridges: - SiI9234 support New panels: - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba LT089AC19000, Innolux AT043TN24 i915: - Remove Coffeelake from alpha support - Cannonlake workarounds - Infoframe refactoring for DisplayPort - VBT updates - DisplayPort vswing/emph/buffer translation refactoring - CCS fixes - Restore GPU clock boost on missed vblanks - Scatter list updates for userptr allocations - Gen9+ transition watermarks - Display IPC (Isochronous Priority Control) - Private PAT management - GVT: improved error handling and pci config sanitizing - Execlist refactoring - Transparent Huge Page support - User defined priorities support - HuC/GuC firmware refactoring - DP MST fixes - eDP power sequencing fixes - Use RCU instead of stop_machine - PSR state tracking support - Eviction fixes - BDW DP aux channel timeout fixes - LSPCON fixes - Cannonlake PLL fixes amdgpu: - Per VM BO support - Powerplay cleanups - CI powerplay support - PASID mgr for kfd - SR-IOV fixes - initial GPU reset for vega10 - Prime mmap support - TTM updates - Clock query interface for Raven - Fence to handle ioctl - UVD encode ring support on Polaris - Transparent huge page DMA support - Compute LRU pipe tweaks - BO flag to allow buffers to opt out of implicit sync - CTX priority setting API - VRAM lost infrastructure plumbing qxl: - fix flicker since atomic rework amdkfd: - Further improvements from internal AMD tree - Usermode events - Drop radeon support nouveau: - Pascal temperature sensor support - Improved BAR2 handling - MMU rework to support Pascal MMU exynos: - Improved HDMI/mixer support - HDMI audio interface support tegra: - Prep work for tegra186 - Cleanup/fixes msm: - Preemption support for a5xx - Display fixes for 8x96 (snapdragon 820) - Async cursor plane fixes - FW loading rework - GPU debugging improvements vc4: - Prep for DSI panels - fix T-format tiling scanout - New madvise ioctl Rockchip: - LVDS support omapdrm: - omap4 HDMI CEC support etnaviv: - GPU performance counters groundwork sun4i: - refactor driver load + TCON backend - HDMI improvements - A31 support - Misc fixes udl: - Probe/EDID read fixes. tilcdc: - Misc fixes. pl111: - Support more variants adv7511: - Improve EDID handling. - HDMI CEC support sii8620: - Add remote control support" * tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits) drm/rockchip: analogix_dp: Use mutex rather than spinlock drm/mode_object: fix documentation for object lookups. drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04drm/i915: Remove defunct trace pointsChris Wilson1-55/+17
trace_i915_gem_evict_everything and trace_i915_gem_ring_flush stopped being used when their parent functions were removed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-2-chris@chris-wilson.co.uk
2017-10-04drm/i915: Fix some tracepoints to capture full 64bChris Wilson1-22/+22
The tracepoints need some tlc, in particular we've neglected to update them for the 64b era. v2: Prefix hexadecimal output with 0x. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2017-09-04drm/i915: Use correct path to trace includeThierry Reding1-1/+1
The header comment in include/trace/define_trace.h specifies that the TRACE_INCLUDE_PATH needs to be relative to the define_trace.h header rather than the trace file including it. Most instances get that wrong and work around it by adding the $(src) directory to the include path. While this works, it is preferable to refer to the correct path to the trace file in the first place and avoid any workaround. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170901144954.19620-4-thierry.reding@gmail.com
2017-09-01drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoderVille Syrjälä1-2/+2
Use enum pipe for PCH transcoders also in the FIFO underrun code. Fixes the following new sparse warnings: intel_fifo_underrun.c:340:49: warning: mixing different enum types intel_fifo_underrun.c:340:49: int enum pipe versus intel_fifo_underrun.c:340:49: int enum transcoder intel_fifo_underrun.c:344:49: warning: mixing different enum types intel_fifo_underrun.c:344:49: int enum pipe versus intel_fifo_underrun.c:344:49: int enum transcoder intel_fifo_underrun.c:397:57: warning: mixing different enum types intel_fifo_underrun.c:397:57: int enum pipe versus intel_fifo_underrun.c:397:57: int enum transcoder intel_fifo_underrun.c:398:17: warning: mixing different enum types intel_fifo_underrun.c:398:17: int enum pipe versus intel_fifo_underrun.c:398:17: int enum transcoder Cc: Matthias Kaehlcke <mka@chromium.org> Fixes: a21960339c8c ("drm/i915: Consistently use enum pipe for PCH transcoders") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170901143123.7590-3-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 41c32e5da3ff3922490341a988b2a3ae46d0b6a8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-09-01drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoderVille Syrjälä1-2/+2
Use enum pipe for PCH transcoders also in the FIFO underrun code. Fixes the following new sparse warnings: intel_fifo_underrun.c:340:49: warning: mixing different enum types intel_fifo_underrun.c:340:49: int enum pipe versus intel_fifo_underrun.c:340:49: int enum transcoder intel_fifo_underrun.c:344:49: warning: mixing different enum types intel_fifo_underrun.c:344:49: int enum pipe versus intel_fifo_underrun.c:344:49: int enum transcoder intel_fifo_underrun.c:397:57: warning: mixing different enum types intel_fifo_underrun.c:397:57: int enum pipe versus intel_fifo_underrun.c:397:57: int enum transcoder intel_fifo_underrun.c:398:17: warning: mixing different enum types intel_fifo_underrun.c:398:17: int enum pipe versus intel_fifo_underrun.c:398:17: int enum transcoder Cc: Matthias Kaehlcke <mka@chromium.org> Fixes: a21960339c8c ("drm/i915: Consistently use enum pipe for PCH transcoders") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170901143123.7590-3-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-05-10drm/i915: Add g4x watermark tracepointVille Syrjälä1-0/+49
Add a tracepoint for watermark programming on g4x, similar to what we have on vlv/chv. Should help in debugging watermark programming sequence issues. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170421181432.15216-15-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-03-17drm/i915: Avoid use-after-free of ctx in request tracepointsChris Wilson1-4/+4
trace_i915_gem_request_out may be used after the request is completed, and so the request may have been retired on another thread, invalidating the rq->ctx. Avoid dereferencing rq->ctx in the tracepoint by switching to the fence context id instead, updating all tracepoints to match. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170316204235.27786-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2017-03-03drm/i915: Add FIFO underrun tracepointsVille Syrjälä1-0/+43
Add tracepoints for display FIFO underruns. Makes it more convenient to correlate the underruns with other display tracepoints. v2: s/i915/intel/ in the tracepoint name Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-19-ville.syrjala@linux.intel.com
2017-03-03drm/i915: Add cxsr toggle tracepointVille Syrjälä1-0/+30
Add a tracepoint for observing changes in the cxsr state. The tracepoint will dump out the frame and scanline counters for each pipe so that the information can be compared with eg. plane update tracepoints. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-18-ville.syrjala@linux.intel.com
2017-03-03drm/i915: Add VLV/CHV watermark/FIFO programming tracepointsVille Syrjälä1-0/+71
Add tracepoints for observing the WM/FIFO programming on VLV/CHV. When compared with the plane and pipe update tracepoints this can be used to verify that everything is performed in the right sequence. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-17-ville.syrjala@linux.intel.com
2017-03-03drm/i915: Add plane update/disable tracepointsVille Syrjälä1-0/+56
Add tracepoints for plane programming. The tracepoints will dump the frame and scanline counters, so this can be used to verify eg. that the plane gets reprogrammed at the right time with respect to watermark programming (if we have appropriate tracepoints for that as well). v2: Rebase due to legacy cursor changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302171508.1666-16-ville.syrjala@linux.intel.com
2017-02-22drm/i915: Remove change_domain tracepointChris Wilson1-24/+0
The change_domain tracepoint has been inaccurate for a few years - it doesn't fully capture the domains, especially with userspace bypassing them. It is defunct, misleading and time to be removed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170222114049.28456-1-chris@chris-wilson.co.uk
2017-02-21drm/i915/tracepoints: Add hw_id to context tracepointsTvrtko Ursulin1-3/+5
It is useful to provide this info to match the one provided in the request tracepoints. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170221091350.14605-1-tvrtko.ursulin@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-02-21drm/i915/tracepoints: Add backend level request in and out tracepointsTvrtko Ursulin1-0/+49
Two new tracepoints placed at the call sites where requests are actually passed to the GPU enable userspace to track engine utilisation. These tracepoints are only enabled when the DRM_I915_LOW_LEVEL_TRACEPOINTS Kconfig option is enabled. v2: Fix compilation with !CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS. v3: Name global seqno consistently across tracepoints. v4: Remove port info from request out tracepoint. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-02-21drm/i915/tracepoints: Rename i915_gem_request_notifyTvrtko Ursulin1-5/+8
i915_gem_ring_notify is more appropriate since we do not have the request information at this point, but it is simply a signal from the engine that some request has been completed. v2: * Always trace and log if there were any waiters. * Rename to intel_engine_notify. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-02-21drm/i915/tracepoints: Add request submit and execute tracepointsTvrtko Ursulin1-0/+24
These new tracepoints are emitted once the request is ready to be submitted to the GPU and once the request is about to be submitted to the GPU, respectively. Former condition triggers as soon as all the fences and dependencies have been resolved, and the latter once the backend is about to submit it to the GPU. New tracepoint are enabled via the new DRM_I915_LOW_LEVEL_TRACEPOINTS Kconfig option which is disabled by default to alleviate the performance impact concerns. v2: Move execute tracepoint to __i915_gem_request_submit. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-02-21drm/i915/tracepoints: Remove unused i915_gem_request_completeTvrtko Ursulin1-5/+0
Tracepoint is not used and won't be suitable for its replacement. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-02-21drm/i915/tracepoints: Tidy i915_gem_request_wait_beginTvrtko Ursulin1-9/+13
Provide the same information as the other request event classes. v2: Pass in flags so we can properly report the blocking status. (Chris Wilson) v3: Log hex with 0x prefix for clarity. v4: Derive blocking status from flags. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-02-21drm/i915/tracepoints: Adjust i915_gem_ring_dispatchTvrtko Ursulin1-5/+7
Rename it to i915_gem_request_queue and fix the logged info equivalent to the i915_gem_request even class. Also moved it a bit further apart from the i915_gem_request_add tracepoint since they otherwise provide similar information too close in time. v2: Remove sw fence singalling. We will rely on the soon to come GuC scheduling backend to enable that. (Chris Wilson) v3: Log hex with 0x prefix for clarity. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-02-21drm/i915/tracepoints: Tidy request event classTvrtko Ursulin1-3/+8
At the moment only the global seqno is logged which is not set until the request is ready for submission. Add the per-contex seqno and the context hardware id which are both interesting data points. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-02-15drm/i915: Remove defunct GTT tracepointsChris Wilson1-97/+0
The tracepoints are now entirely synonymous with binding and unbinding the VMA (and the tracepoints there). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-18-chris@chris-wilson.co.uk
2017-02-15drm/i915: Remove bitmap tracking for used-ptesChris Wilson1-13/+6
We only operate on known extents (both for alloc/clear) and so we can use both the knowledge of the bind/unbind range along with the knowledge of the existing pagetable to avoid having to allocate temporary and auxiliary bitmaps. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99295 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-12-chris@chris-wilson.co.uk
2017-01-11drm/i915: Extract reserving space in the GTT to a helperChris Wilson1-8/+8
Extract drm_mm_reserve_node + calling i915_gem_evict_for_node into its own routine so that it can be shared rather than duplicated. v2: Kerneldoc Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: igvt-g-dev@lists.01.org Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-2-chris@chris-wilson.co.uk
2016-12-05drm/i915: Fix i915_gem_evict_for_vma (soft-pinning)Chris Wilson1-0/+28
Soft-pinning depends upon being able to check for availabilty of an interval and evict overlapping object from a drm_mm range manager very quickly. Currently it uses a linear list, and so performance is dire and not suitable as a general replacement. Worse, the current code will oops if it tries to evict an active buffer. It also helps if the routine reports the correct error codes as expected by its callers and emits a tracepoint upon use. For posterity since the wrong patch was pushed (i.e. that missed these key points and had known bugs), this is the changelog that should have been on commit 506a8e87d8d2 ("drm/i915: Add soft-pinning API for execbuffer"): Userspace can pass in an offset that it presumes the object is located at. The kernel will then do its utmost to fit the object into that location. The assumption is that userspace is handling its own object locations (for example along with full-ppgtt) and that the kernel will rarely have to make space for the user's requests. This extends the DRM_IOCTL_I915_GEM_EXECBUFFER2 to do the following: * if the user supplies a virtual address via the execobject->offset *and* sets the EXEC_OBJECT_PINNED flag in execobject->flags, then that object is placed at that offset in the address space selected by the context specifier in execbuffer. * the location must be aligned to the GTT page size, 4096 bytes * as the object is placed exactly as specified, it may be used by this execbuffer call without relocations pointing to it It may fail to do so if: * EINVAL is returned if the object does not have a 4096 byte aligned address * the object conflicts with another pinned object (either pinned by hardware in that address space, e.g. scanouts in the aliasing ppgtt) or within the same batch. EBUSY is returned if the location is pinned by hardware EINVAL is returned if the location is already in use by the batch * EINVAL is returned if the object conflicts with its own alignment (as meets the hardware requirements) or if the placement of the object does not fit within the address space All other execbuffer errors apply. Presence of this execbuf extension may be queried by passing I915_PARAM_HAS_EXEC_SOFTPIN to DRM_IOCTL_I915_GETPARAM and checking for a reported value of 1 (or greater). v2: Combine the hole/adjusted-hole ENOSPC checks v3: More color, more splitting, more blurb. Fixes: 506a8e87d8d2 ("drm/i915: Add soft-pinning API for execbuffer") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-2-chris@chris-wilson.co.uk
2016-11-29drm/i915: Fix tracepoint compilationChris Wilson1-3/+3
drivers/gpu/drm/i915/./i915_trace.h: In function ‘trace_event_raw_event_i915_gem_evict’: drivers/gpu/drm/i915/./i915_trace.h:409:24: error: ‘struct i915_address_space’ has no member named ‘dev’ __entry->dev = vm->dev->primary->index; A couple of macros missed in the s/vm->dev/vm->i915/ conversion. Fixes: 49d73912cbfc ("drm/i915: Convert vm->dev backpointer to vm->i915") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161129124205.19351-1-chris@chris-wilson.co.uk Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
2016-10-28drm/i915: Introduce a global_seqno for each requestChris Wilson1-4/+4
Though we will have multiple timelines, we still have a single timeline of execution. This we can use to provide an execution and retirement order of requests. This keeps tracking execution of requests simple, and vital for preserving a single waiter (i.e. so that we can order the waiters so that only the earliest to wakeup need be woken). To accomplish this we distinguish the seqno used to order requests per-context (external) and that used internally for execution. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-26-chris@chris-wilson.co.uk
2016-10-25dma-buf: Rename struct fence to dma_fenceChris Wilson1-1/+1
I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-08-04drm/i915: Remove surplus drm_device parameter to i915_gem_evict_something()Chris Wilson1-6/+8
Eviction is VM local, so we can ignore the significance of the drm_device in the caller, and leave it to i915_gem_evict_something() to manage itself. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470324762-2545-2-git-send-email-chris@chris-wilson.co.uk
2016-08-02drm/i915: Simplify request_alloc by returning the allocated requestChris Wilson1-7/+6
If is simpler and leads to more readable code through the callstack if the allocation returns the allocated struct through the return value. The importance of this is that it no longer looks like we accidentally allocate requests as side-effect of calling certain functions. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1469432687-22756-19-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470174640-18242-9-git-send-email-chris@chris-wilson.co.uk
2016-07-20drm/i915: Derive GEM requests from dma-fenceChris Wilson1-5/+5
dma-buf provides a generic fence class for interoperation between drivers. Internally we use the request structure as a fence, and so with only a little bit of interfacing we can rebase those requests on top of dma-buf fences. This will allow us, in the future, to pass those fences back to userspace or between drivers. v2: The fence_context needs to be globally unique, not just unique to this device. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1469002875-2335-4-git-send-email-chris@chris-wilson.co.uk
2016-07-05drm/i915: Convert dev_priv->dev backpointers to dev_priv->drmChris Wilson1-10/+10
Since drm_i915_private is now a subclass of drm_device we do not need to chase the drm_i915_private->dev backpointer and can instead simply access drm_i915_private->drm directly. text data bss dec hex filename 1068757 4565 416 1073738 10624a drivers/gpu/drm/i915/i915.ko 1066949 4565 416 1071930 105b3a drivers/gpu/drm/i915/i915.ko Created by the coccinelle script: @@ struct drm_i915_private *d; identifier i; @@ ( - d->dev->i + d->drm.i | - d->dev + &d->drm ) and for good measure the dev_priv->dev backpointer was removed entirely. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1467711623-2905-4-git-send-email-chris@chris-wilson.co.uk
2016-07-01drm/i915: Convert trace-irq to the breadcrumb waiterChris Wilson1-1/+1
If we convert the tracing over from direct use of ring->irq_get() and over to the breadcrumb infrastructure, we only have a single user of the ring->irq_get and so we will be able to simplify the driver routines (eliminating the redundant validation and irq refcounting). Process context is preferred over softirq (or even hardirq) for a couple of reasons: - we already utilize process context to have fast wakeup of a single client (i.e. the client waiting for the GPU inspects the seqno for itself following an interrupt to avoid the overhead of a context switch before it returns to userspace) - engine->irq_seqno() is not suitable for use from an softirq/hardirq context as we may require long waits (100-250us) to ensure the seqno write is posted before we read it from the CPU A signaling framework is a requirement for enabling dma-fences. v2: Move to a signaling framework based upon the waiter. v3: Track the first-signal to avoid having to walk the rbtree everytime. v4: Mark the signaler thread as RT priority to reduce latency in the indirect wakeups. v5: Make failure to allocate the thread fatal. v6: Rename kthreads to i915/signal:%u Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1467390209-3576-16-git-send-email-chris@chris-wilson.co.uk
2016-07-01drm/i915: Use HWS for seqno tracking everywhereChris Wilson1-1/+1
By using the same address for storing the HWS on every platform, we can remove the platform specific vfuncs and reduce the get-seqno routine to a single read of a cached memory location. v2: Fix semaphore_passed() to look at the signaling engine (not the waiter's) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1467390209-3576-8-git-send-email-chris@chris-wilson.co.uk
2016-05-24drm/i915: Rename struct intel_contextChris Wilson1-6/+6
Our goal is to rename the anonymous per-engine struct beneath the current intel_context. However, after a lively debate resolving around the confusion between intel_context_engine and intel_engine_context, the realisation is that the two structs target different users. The outer struct is API / user facing, and so carries the higher level GEM information. The inner struct is hw facing. Thus we want to name the inner struct intel_context and the outer one i915_gem_context. As the first step, we need to rename the current struct: s/struct intel_context/struct i915_gem_context/ which fits much better with its constructors already conveying the i915_gem_context prefix! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464098023-3294-1-git-send-email-chris@chris-wilson.co.uk
2016-05-09drm/i915: Store a i915 backpointer from engine, and use itChris Wilson1-21/+15
text data bss dec hex filename 6309351 3578714 696320 10584385 a18141 vmlinux 6308391 3578714 696320 10583425 a17d81 vmlinux Almost 1KiB of code reduction. v2: More s/INTEL_INFO()->gen/INTEL_GEN()/ and IS_GENx() conversions text data bss dec hex filename 6304579 3578778 696320 10579677 a16edd vmlinux 6303427 3578778 696320 10578525 a16a5d vmlinux Now over 1KiB! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462545621-30125-3-git-send-email-chris@chris-wilson.co.uk
2016-04-09drm/i915: Separate out the seqno-barrier from engine->get_seqnoChris Wilson1-1/+1
In order to simplify future patches, extract the lazy_coherency optimisation our of the engine->get_seqno() vfunc into its own callback. v2: Rename the barrier to engine->irq_seqno_barrier to try and better reflect that the barrier is only required after the user interrupt before reading the seqno (to ensure that the seqno update lands in time as we do not have strict seqno-irq ordering on all platforms). Reviewed-by: Dave Gordon <david.s.gordon@intel.com> [#v2] v3: Comments for hangcheck paranoia. Mika wanted to keep the extra barrier inside the hangcheck, just in case. I can argue that it doesn't provide a barrier against anything, but the side-effects of applying the barrier may prevent a false declaration of a hung GPU. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460195877-20520-2-git-send-email-chris@chris-wilson.co.uk
2016-03-16drm/i915: More intel_engine_cs renamingTvrtko Ursulin1-3/+3
Some trivial ones, first pass done with Coccinelle: @@ @@ ( - I915_NUM_RINGS + I915_NUM_ENGINES | - intel_ring_flag + intel_engine_flag | - for_each_ring + for_each_engine | - i915_gem_request_get_ring + i915_gem_request_get_engine | - intel_ring_idle + intel_engine_idle | - i915_gem_reset_ring_status + i915_gem_reset_engine_status | - i915_gem_reset_ring_cleanup + i915_gem_reset_engine_cleanup | - init_ring_lists + init_engine_lists ) But that didn't fully work so I cleaned it up with: for f in *.[hc]; do sed -i -e s/I915_NUM_RINGS/I915_NUM_ENGINES/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_request_get_ring/i915_gem_request_get_engine/ $f; done for f in *.[hc]; do sed -i -e s/intel_ring_flag/intel_engine_flag/ $f; done for f in *.[hc]; do sed -i -e s/intel_ring_idle/intel_engine_idle/ $f; done for f in *.[hc]; do sed -i -e s/init_ring_lists/init_engine_lists/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_cleanup/i915_gem_reset_engine_cleanup/ $f; done for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_status/i915_gem_reset_engine_status/ $f; done v2: Rebase. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-30 11:43:22 +0000