summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_lease.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-24drm/lease: Check for lessor outside of locksDaniel Vetter1-3/+3
The lessor is invariant over a lifetime of a lease, we don't have to grab any locks for that. Speeds up the common case of not being a lease. Cc: Keith Packard <keithp@keithp.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-5-daniel.vetter@ffwll.ch
2019-04-24drm/lease: Drop recursive leads checksDaniel Vetter1-2/+0
We disallow subleasing, so no point checking whether the master holds all the leases - it will. Spotted while typing exhaustive igt coverage for all these corner cases. Cc: Keith Packard <keithp@keithp.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-3-daniel.vetter@ffwll.ch
2019-04-24drm/leases: Drop object_id validation for negative idsDaniel Vetter1-5/+0
Not exactly sure what's the aim here, but the canonical nil object has id == 0, we don't use negative object ids for anything. Plus all object_id are valided by the object_idr, there's nothing we need to do on top of that ENOENT check a bit further down. Spotted while typing exhaustive igt coverage for all these corner-cases. Cc: Keith Packard <keithp@keithp.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-2-daniel.vetter@ffwll.ch
2019-02-18Merge v5.0-rc7 into drm-nextDave Airlie1-1/+2
Backmerging for nouveau and imx that needed some fixes for next pulls. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-15drm: Use array_size() when creating leasedrm-fixes-2019-02-15-1Matthew Wilcox1-1/+2
Passing an object_count of sufficient size will make object_count * 4 wrap around to be very small, then a later function will happily iterate off the end of the object_ids array. Using array_size() will saturate at SIZE_MAX, the kmalloc() will fail and we'll return an -ENOMEM to the norty userspace. Fixes: 62884cd386b8 ("drm: Add four ioctls for managing drm mode object leases [v7]") Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.15+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-01-10Merge tag 'drm-misc-next-2019-01-07-1' of ↵Dave Airlie1-3/+3
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.1: UAPI Changes: Cross-subsystem Changes: - Turn dma-buf fence sequence numbers into 64 bit numbers Core Changes: - Move to a common helper for the DP MST hotplug for radeon, i915 and amdgpu - i2c improvements for drm_dp_mst - Removal of drm_syncobj_cb - Introduction of an helper to create and attach the TV margin properties Driver Changes: - Improve cache flushes for v3d - Reflection support for vc4 - HDMI overscan support for vc4 - Add implicit fencing support for rockchip and sun4i - Switch to generic fbdev emulation for virtio Signed-off-by: Dave Airlie <airlied@redhat.com> [airlied: applied amdgpu merge fixup] From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190107180333.amklwycudbsub3s5@flea
2018-12-25Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-15/+23
Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010 vgem: - render node support ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support virtio-gpu: - add EDID support vmwgfx: - pageflip with damage support nouveau: - Initial Turing TU104/TU106 modesetting support msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194 exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix qxl: - fix cursor pinning vc4: - YUV support (scaling + cursor) v3d: - enable TFU (Texture Formatting Unit) mali-dp: - add support for linear tiled formats sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes bridge: - i2c fixes for sii902x" * tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ...
2018-12-13drm: Rename crtc_idr as object_idr to KMS cleanupsShayenne da Luz Moura1-3/+3
This patch solves this TODO task: drm_mode_config.crtc_idr is misnamed, since it contains all KMS object. Should be renamed to drm_mode_config.object_idr. Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com> [danvet: resolve conflict with addition of privobj_list.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181213212957.vkitkyl5cj2qh7qr@smtp.gmail.com
2018-11-30drm/lease: Send a distinct ueventDaniel Vetter1-1/+1
Sending the exact same hotplug event is not great uapi. Luckily the only already merged implementation of leases (in the -modesetting driver) doesn't care about what kind of uevent it gets, and unconditionally processes both hotplug and lease changes. So we can still adjust the uapi here. But e.g. weston tries to filter stuff, and I guess others might want to do that too. Try to make that possible. Cc: stable since it's uapi adjustement that we want to roll out everywhere. Michel Dänzer mentioned on irc that -amdgpu also has lease support. It has the same code flow as -modesetting though, so we can still go ahead. v2: Mention -amdgpu (Michel) Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181129094226.30591-1-daniel.vetter@ffwll.ch
2018-11-19Merge tag 'drm-misc-next-2018-11-07' of ↵Dave Airlie1-15/+23
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 1: UAPI Changes: - Add syncobj timeline support to drm. Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi. Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem. Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
2018-11-13Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst1-3/+3
drm-next is forwarded to v4.20-rc1, and we need this to make a patch series apply. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-11-06drm/lease: look at ->universal_planes only onceDaniel Vetter1-6/+8
It's lockless, and userspace might chance it underneath us. That's not really a problem, all userspace gets is a slightly dysfunctional lease with the current code. But this might change, and gcc might decide to reload a few too many times, and then boom. So better safe than sorry. v2: Remove the now unused lessor_priv argument from validate_lease() (Keith). v3: Actually add everything ... silly me. Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105101211.22737-1-daniel.vetter@ffwll.ch
2018-11-06drm/lease: debug output for lease creationDaniel Vetter1-4/+14
I spent a bit of time scratching heads and figuring out why the igts don't work. Probably useful to keep this work. Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181102132543.16486-1-daniel.vetter@ffwll.ch
2018-11-02drm/lease: drop EXPORT_SYMBOLDaniel Vetter1-4/+0
Leases are entirely implemented within drm.ko, no need to even tempt drivers into doing nasty things. And if there's really a need, we can always re-export these again. Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102143107.25722-1-daniel.vetter@ffwll.ch
2018-10-29gpu: drm/lease: fix spelling mistake, EACCESS -> EACCESColin Ian King1-1/+1
Trivial fix to a spelling mistake of the error access name EACCESS, rename to EACCES Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181026180512.4908-1-colin.king@canonical.com
2018-10-28Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-4/+4
Pull drm updates from Dave Airlie: "This is going to rebuild more than drm as it adds a new helper to list.h for doing bulk updates. Seemed like a reasonable addition to me. Otherwise the usual merge window stuff lots of i915 and amdgpu, not so much nouveau, and piles of everything else. Core: - Adds a new list.h helper for doing bulk list updates for TTM. - Don't leak fb address in smem_start to userspace (comes with EXPORT workaround for people using mali out of tree hacks) - udmabuf device to turn memfd regions into dma-buf - Per-plane blend mode property - ref/unref replacements with get/put - fbdev conflicting framebuffers code cleaned up - host-endian format variants - panel orientation quirk for Acer One 10 bridge: - TI SN65DSI86 chip support vkms: - GEM support. - Cursor support amdgpu: - Merge amdkfd and amdgpu into one module - CEC over DP AUX support - Picasso APU support + VCN dynamic powergating - Raven2 APU support - Vega20 enablement + kfd support - ACP powergating improvements - ABGR/XBGR display support - VCN jpeg support - xGMI support - DC i2c/aux cleanup - Ycbcr 4:2:0 support - GPUVM improvements - Powerplay and powerplay endian fixes - Display underflow fixes vmwgfx: - Move vmwgfx specific TTM code to vmwgfx - Split out vmwgfx buffer/resource validation code - Atomic operation rework bochs: - use more helpers - format/byteorder improvements qxl: - use more helpers i915: - GGTT coherency getparam - Turn off resource streamer API - More Icelake enablement + DMC firmware - Full PPGTT for Ivybridge, Haswell and Valleyview - DDB distribution based on resolution - Limited range DP display support nouveau: - CEC over DP AUX support - Initial HDMI 2.0 support virtio-gpu: - vmap support for PRIME objects tegra: - Initial Tegra194 support - DMA/IOMMU integration fixes msm: - a6xx perf improvements + clock prefix - GPU preemption optimisations - a6xx devfreq support - cursor support rockchip: - PX30 support - rgb output interface support mediatek: - HDMI output support on mt2701 and mt7623 rcar-du: - Interlaced modes on Gen3 - LVDS on R8A77980 - D3 and E3 SoC support hisilicon: - misc fixes mxsfb: - runtime pm support sun4i: - R40 TCON support - Allwinner A64 support - R40 HDMI support omapdrm: - Driver rework changing display pipeline ordering to use common code - DMM memory barrier and irq fixes - Errata workarounds exynos: - out-bridge support for LVDS bridge driver - Samsung 16x16 tiled format support - Plane alpha and pixel blend mode support tilcdc: - suspend/resume update mali-dp: - misc updates" * tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits) firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake. drm/i915/icl: Fix signal_levels drm/i915/icl: Fix DDI/TC port clk_off bits drm/i915/icl: create function to identify combophy port drm/i915/gen9+: Fix initial readout for Y tiled framebuffers drm/i915: Large page offsets for pread/pwrite drm/i915/selftests: Disable shrinker across mmap-exhaustion drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode drm/i915: Fix intel_dp_mst_best_encoder() drm/i915: Skip vcpi allocation for MSTB ports that are gone drm/i915: Don't unset intel_connector->mst_port drm/i915: Only reset seqno if actually idle drm/i915: Use the correct crtc when sanitizing plane mapping drm/i915: Restore vblank interrupts earlier drm/i915: Check fb stride against plane max stride drm/amdgpu/vcn:Fix uninitialized symbol error drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003) drm/amd/amdgpu: Fix debugfs error handling drm/amdgpu: Update gc_9_0 golden settings. drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields ...
2018-10-02drm: fix use-after-free read in drm_mode_create_lease_ioctl()Jann Horn1-3/+3
fd_install() moves the reference given to it into the file descriptor table of the current process. If the current process is multithreaded, then immediately after fd_install(), another thread can close() the file descriptor and cause the file's resources to be cleaned up. Since the reference to "lessee" is held by the file, we must not access "lessee" after the fd_install() call. As far as I can tell, to reach this codepath, the caller must have an open file descriptor to a DRI device in master mode. I'm not sure what the requirements for that are. Signed-off-by: Jann Horn <jannh@google.com> Fixes: 62884cd386b8 ("drm: Add four ioctls for managing drm mode object leases [v7]") Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001153117.216923-1-jannh@google.com
2018-09-14drm: Differentiate the lack of an interface from invalid parameterChris Wilson1-4/+4
If the ioctl is not supported on a particular piece of HW/driver combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily distinguished from both the lack of the ioctl and from a regular invalid parameter. v2: Across all the kms ioctls we had a mixture of reporting EINVAL, ENODEV and a few ENOTSUPP (most where EINVAL) for a failed drm_core_check_feature(). Update everybody to report ENOTSUPP. v3: ENOTSUPP is an internal errno! It's value (524) does not correspond to a POSIX errno, the one we want is ENOTSUP. However, uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says "ENOTSUP and EOPNOTSUPP have the same value on Linux, but according to POSIX.1 these error values should be distinct." so use EOPNOTSUPP as its equivalent. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
2018-07-10turn filp_clone_open() into inline wrapper for dentry_open()Al Viro1-1/+1
it's exactly the same thing as dentry_open(&file->f_path, file->f_flags, file->f_cred) ... and rename it to file_clone_open(), while we are at it. 'filp' naming convention is bogus; sure, it's "file pointer", but we generally don't do that kind of Hungarian notation. Some of the instances have too many callers to touch, but this one has only two, so let's sanitize it while we can... Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-10drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open()Al Viro1-15/+1
Failure of ->open() should *not* be followed by fput(). Fixed by using filp_clone_open(), which gets the cleanups right. Cc: stable@vger.kernel.org Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-26gpu: drm/lease:: Use list_{next/prev}_entry instead of list_entryArushi Singhal1-1/+1
It's better to use list_entry instead of list_{next/prev}_entry as it makes the code more clear to read. This patch replace list_entry with list_{next/prev}_entry. Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1522000893-5331-2-git-send-email-arushisinghal19971997@gmail.com
2018-02-19drm: Fix kerneldoc warnings for drm_leaseChris Wilson1-8/+8
drivers/gpu/drm/drm_lease.c:56: warning: No description found for parameter 'lessee_id' drivers/gpu/drm/drm_lease.c:56: warning: Excess function parameter 'id' description in '_drm_find_lessee' drivers/gpu/drm/drm_lease.c:114: warning: No description found for parameter 'file_priv' drivers/gpu/drm/drm_lease.c:114: warning: Excess function parameter 'master' description in '_drm_lease_held' drivers/gpu/drm/drm_lease.c:134: warning: No description found for parameter 'file_priv' drivers/gpu/drm/drm_lease.c:134: warning: Excess function parameter 'master' description in 'drm_lease_held' drivers/gpu/drm/drm_lease.c:158: warning: No description found for parameter 'crtcs_in' drivers/gpu/drm/drm_lease.c:158: warning: Excess function parameter 'crtcs' description in 'drm_lease_filter_crtcs' drivers/gpu/drm/drm_lease.c:311: warning: No description found for parameter 'top' drivers/gpu/drm/drm_lease.c:311: warning: Excess function parameter 'master' description in '_drm_lease_revoke' drivers/gpu/drm/drm_lease.c:494: warning: No description found for parameter 'lessor_priv' drivers/gpu/drm/drm_lease.c:494: warning: Excess function parameter 'file_priv' description in 'drm_mode_create_lease_ioctl' drivers/gpu/drm/drm_lease.c:672: warning: No description found for parameter 'lessee_priv' drivers/gpu/drm/drm_lease.c:672: warning: Excess function parameter 'file_priv' description in 'drm_mode_get_lease_ioctl' drivers/gpu/drm/drm_lease.c:733: warning: No description found for parameter 'lessor_priv' drivers/gpu/drm/drm_lease.c:733: warning: Excess function parameter 'file_priv' description in 'drm_mode_revoke_lease_ioctl' Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180208110817.30057-1-chris@chris-wilson.co.uk
2017-12-21drm: move lease init after validation in drm_lease_createKeith Packard1-11/+11
Patch bd36d3bab2e3d08f80766c86487090dbceed4651 fixed a deadlock in the failure path of drm_lease_create. This made the partially initialized lease object visible for a short window of time. To avoid having the lessee state appear transiently, I've rearranged the code so that the lessor fields are not filled in until the parameters are all validated and the function will succeed. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171221065424.1304-1-keithp@keithp.com
2017-12-14drm/drm_lease: Prevent deadlock in case drm_lease_create() failsMarius Vlad1-2/+2
This case can been seen when creating the lease with the same objects passed. [ 605.515097] 2 locks held by testapp/3337: [ 605.519027] #0: (&dev->mode_config.idr_mutex){......}, at: [<ffff0000085f1664>] drm_mode_create_lease_ioctl+0x384/0x858 [ 605.530045] #1: (&dev->mode_config.idr_mutex){......}, at: [<ffff0000085f11bc>] drm_lease_destroy+0x2c/0x110 Which was causing the process to hang: [ 605.398827] [<ffff0000080856cc>] __switch_to+0x94/0xa8 [ 605.404030] [<ffff000008c05d00>] __schedule+0x1b0/0x698 [ 605.409322] [<ffff000008c06224>] schedule+0x3c/0xa8 [ 605.414260] [<ffff000008c06628>] schedule_preempt_disabled+0x20/0x38 [ 605.420677] [<ffff000008c07370>] mutex_lock_nested+0x158/0x340 [ 605.426572] [<ffff0000085f11bc>] drm_lease_destroy+0x2c/0x110 [ 605.432389] [<ffff0000085cecf0>] drm_master_put+0xc0/0xc8 [ 605.437845] [<ffff0000085f175c>] drm_mode_create_lease_ioctl+0x47c/0x858 [ 605.444612] [<ffff0000085d4460>] drm_ioctl+0x198/0x448 [ 605.449811] [<ffff000008201134>] do_vfs_ioctl+0xa4/0x748 [ 605.455192] [<ffff000008201864>] SyS_ioctl+0x8c/0xa0 [ 605.460216] [<ffff000008082f4c>] __sys_trace_return+0x0/0x4 drm_mode_create_lease_ioctl() calls drm_lease_create() which acquires a lock on dev->mode_config.idr_mutex. In case of failure, drm_lease_create() calls drm_master_put() which in turn tries to acquire the same lock when calling drm_lease_destroy(). v2: - Reverse the order at exit in case of fail, so that unlocking takes place before dropping the reference. - Include detail information about deadlock (Daniel Vetter) Signed-off-by: Marius Vlad <marius-cristian.vlad@nxp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171213181048.32719-1-marius-cristian.vlad@nxp.com
2017-10-25drm: Add four ioctls for managing drm mode object leases [v7]Keith Packard1-0/+412
drm_mode_create_lease Creates a lease for a list of drm mode objects, returning an fd for the new drm_master and a 64-bit identifier for the lessee drm_mode_list_lesees List the identifiers of the lessees for a master file drm_mode_get_lease List the leased objects for a master file drm_mode_revoke_lease Erase the set of objects managed by a lease. This should suffice to at least create and query leases. Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>: * query ioctls only query the master associated with the provided file. * 'mask_lease' value has been removed * change ioctl has been removed. Changes for v3 suggested in part by Dave Airlie <airlied@gmail.com> * Add revoke ioctl. Changes for v4 suggested by Dave Airlie <airlied@gmail.com> * Expand on the comment about the magic use of &drm_lease_idr_object * Pad lease ioctl structures to align on 64-bit boundaries Changes for v5 suggested by Dave Airlie <airlied@gmail.com> * Check for non-negative object_id in create_lease to avoid debug output from the kernel. Changes for v6 provided by Dave Airlie <airlied@gmail.com> * For non-universal planes add primary/cursor planes to lease If we aren't exposing universal planes to this userspace client, and it requests a lease on a crtc, we should implicitly export the primary and cursor planes for the crtc. If the lessee doesn't request universal planes, it will just see the crtc, but if it does request them it will then see the plane objects as well. This also moves the object look ups earlier as a side effect, so we'd exit the ioctl quicker for non-existant objects. * Restrict leases to crtc/connector/planes. This only allows leasing for objects we wish to allow. Changes for v7 provided by Dave Airlie <airlied@gmail.com> * Check pad args are 0 * Check create flags and object count are valid. * Check return from fd allocation * Refactor lease idr setup and add some simple validation * Use idr_mutex uniformly (Keith) Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-10-25drm: Add drm_object lease infrastructure [v5]Keith Packard1-0/+355
This provides new data structures to hold "lease" information about drm mode setting objects, and provides for creating new drm_masters which have access to a subset of the available drm resources. An 'owner' is a drm_master which is not leasing the objects from another drm_master, and hence 'owns' them. A 'lessee' is a drm_master which is leasing objects from some other drm_master. Each lessee holds the set of objects which it is leasing from the lessor. A 'lessor' is a drm_master which is leasing objects to another drm_master. This is the same as the owner in the current code. The set of objects any drm_master 'controls' is limited to the set of objects it leases (for lessees) or all objects (for owners). Objects not controlled by a drm_master cannot be modified through the various state manipulating ioctls, and any state reported back to user space will be edited to make them appear idle and/or unusable. For instance, connectors always report 'disconnected', while encoders report no possible crtcs or clones. The full list of lessees leasing objects from an owner (either directly, or indirectly through another lessee), can be searched from an idr in the drm_master of the owner. Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>: * Sub-leasing has been disabled. * BUG_ON for lock checking replaced with lockdep_assert_held * 'change' ioctl has been removed. * Leased objects can always be controlled by the lessor; the 'mask_lease' flag has been removed * Checking for leased status has been simplified, replacing the drm_lease_check function with drm_lease_held. Changes in v3, some suggested by Dave Airlie <airlied@gmail.com> * Add revocation. This allows leases to be effectively revoked by removing all of the objects they have access to. The lease itself hangs around as it's hanging off a file. * Free the leases IDR when the master is destroyed * _drm_lease_held should look at lessees, not lessor * Allow non-master files to check for lease status Changes in v4, suggested by Dave Airlie <airlied@gmail.com> * Formatting and whitespace changes Changes in v5 (airlied) * check DRIVER_MODESET before lease destroy call * check DRIVER_MODESET for lease revoke (Chris) * Use idr_mutex uniformly for all lease elements of struct drm_master. (Keith) Signed-off-by: Keith Packard <keithp@keithp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-27 11:59:00 +0000