summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2020-07-08drm/amd/display: Remove VSC infoframe dep on DMCURoman Li1-17/+13
[Why] VSC infoframe is needed for PSR. Previously only DMCU controller supported PSR. Now DMUB also implements PSR. [How] Remove VSC infoframe dependency on DMCU. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Send VSIF on unsupported modes on DALJaehyun Chung1-1/+1
[Why] Current DAL behaviour is to not send VSIF if mode does not support VRR (ie. FS range is < 10Hz). However, we should still set FS Native Color Active bit in some unsupported mode cases. [How] Remove check for if VRR is supported before building infopacket. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Register initIgor Kravchenko1-23/+35
[Why] Driver re-initialize registers already set in FW [How] Transfer init to FW Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Add diags scaling log by defaultDmytro Laktyushkin2-14/+27
Print scaling parameters as they are calculated in diags. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: remove redundant initialization of variable resultColin Ian King1-2/+3
The variable result is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: Only revalidate bandwidth on medium and fast updatesNicholas Kazlauskas1-4/+6
[Why] Changes that are fast don't require updating DLG parameters making this call unnecessary. Considering this is an expensive call it should not be done on every flip. DML touches clocks, p-state support, DLG params and a few other DC internal flags and these aren't expected during fast. A hang has been reported with this change when called on every flip which suggests that modifying these fields is not recommended behavior on fast updates. [How] Guard the validation to only happen if update type isn't FAST. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191 Fixes: a24eaa5c51255b ("drm/amd/display: Revalidate bandwidth before commiting DC updates") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: Create plane rotation propertyPierre-Loup A. Griffais1-0/+8
It's otherwise properly supported, just needs exposing to userspace. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: Enable 4 to 1 mpc combine for max detile useDmytro Laktyushkin1-8/+16
In case of certain display configurations we want to allow max detile buffer utilization by using 4 to 1 mpc combine Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: 3.2.92Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: Add register key and status for edidJing Zhou2-0/+2
[Why] Register key for AE or QA do regression test. New edid status for check. [How] Add register key edid_read_retry_times. Add new edid status EDID_FALL_BACK. Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: [FW Promotion] Release 1.0.22Anthony Koo1-2/+7
[Header Changes] - Add command for notification of active streams to DMUB Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: Fix incorrect rounding for 10Hz refresh rangeJaehyun Chung2-32/+10
[Why] In cases where refresh range is slightly below 10, FreeSync is not active or supported. Need to round values before checking refresh range in order to have FreeSync supported in these cases. [How] Remove redundant values and round values before checking valid refresh range. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: [FW Promotion] Release 1.0.21Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: check dpcd read status of DP_DOWNSTREAM_PORT_0jinlong zhang1-52/+53
[Why] For special DP convert VGA dongle, core_link_read_dpcd for DP_DOWNSTREAM_PORT_0 always return fail, then dongle_type will be set to DISPLAY_DONGLE_NONE, which will cause desktop resolution abnormal. [How] If dpcd for DP_DOWNSTREAM_PORT_0 read fail, skip set dongle_type = DISPLAY_DONGLE_NONE. Signed-off-by: jinlong zhang <jinlong.zhang@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: Handle SMU msg responseYongqiang Sun2-4/+75
[Why] SMU may return error code to driver, but driver only check if response is OK. [How] Check SMU response instead of reg_wait, assert in case of reponse isn't OK. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: [FW Promotion] Release 1.0.20Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: Preserve gpu memory allocation for life of dcJoshua Aberback3-12/+14
[Why] We want to keep the same buffer allocated for use during multiple hardware initializations. [How] - allocate gpu memory buffer on clock manager construct - free gpu memory buffer on clock manager destruct Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02drm/amd/display: Initialize psr debug flags to 0Wyatt Wood1-0/+1
[Why] Debug flags are not set by default. [How] Set debug flags to 0 Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-02Merge tag 'amd-drm-next-5.9-2020-07-01' of ↵Dave Airlie186-1355/+30607
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.9-2020-07-01: amdgpu: - DC DMUB updates - HDCP fixes - Thermal interrupt fixes - Add initial support for Sienna Cichlid GPU - Add support for unique id on Arcturus - Major swSMU code cleanup - Skip BAR resizing if the bios already did id - Fixes for DCN bandwidth calculations - Runtime PM reference count fixes - Add initial UVD support for SI - Add support for ASSR on eDP links - Lots of misc fixes and cleanups - Enable runtime PM on vega10 boards that support BACO - RAS fixes - SR-IOV fixes - Use IP discovery table on renoir - DC stream synchronization fixes amdkfd: - Track SDMA usage per process - Fix GCC10 compiler warnings - Locking fix radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes UAPI: - Update comments to clarify MTYPE From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701155041.1102829-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-07-01drm/amdgpu: call release_firmware() without a NULL checkNirmoy Das1-8/+4
The release_firmware() function is NULL tolerant so we do not need to check for NULL param before calling it. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amdgpu/display: Unlock mutex on errorJohn van der Kamp1-2/+4
Make sure we pass through ret label to unlock the mutex. Signed-off-by: John van der Kamp <sjonny@suffe.me.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: 3.2.91Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fix ineffective setting of max bpc propertyStylon Wang1-1/+2
[Why] Regression was introduced where setting max bpc property has no effect on the atomic check and final commit. It has the same effect as max bpc being stuck at 8. [How] Correctly propagate max bpc with the new connector state. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.19Anthony Koo1-4/+5
[Header Changes] - Add debug flag for psr to use hw locking mgr state machine Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: DP link layer test 4.2.1.1 fix due to specs updateWenjing Liu9-50/+59
[why] DP link layer CTS specs updated to change the test parameters in test 4.2.1.1. Before it requires source to delay 400us on aux no reply. With the specs updates Errata5, it requires source to delay 3.2ms (based on LTTPR aux timeout) This causes our test to fail after updating with the latest test equipment firmware. [how] the change is to allow LTTPR 3.2ms aux timeout delay by default. And set back to 400us if LTTPR feature is not enabled. We will set 3.2ms and always enable LTTPR non transparent mode if LTTPR feature is enabled and LTTPR is present. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: allow query ddc data over aux to be read only operationWenjing Liu1-11/+18
[why] Two issues: 1. Add read only operation support for query ddc data over aux. 2. Fix a bug where if read size is multiple of 16, mot of the last read transaction will not be set to 0. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Compare v_front_porch when checking if streams are ↵David Galiffi1-0/+4
synchronizable [Why] If the front porch of the two timings differ, then there may not be enough time while both streams are in vertical blank to perform a memory clock change. This can hang the system. [How] Check the each streams timing.v_front_porch when determining if the two streams are synchronizable. Signed-off-by: David Galiffi <David.Galiffi@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: enable seamless boot for dcn30Martin Leung2-127/+126
why: seamless boots requires split of init_hw into hw and pipes to work. This was implemented in dcn10_init_hw but did not apply yet to dcn30. how: Copy over dcn10_init_hw and adapt it to dcn30 using recent changes to dcn3. Behavior will be different in init sequence. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Red screen observed on startupPeikang Zhang1-1/+2
[Why] We try to to change new_clocks->dppclk_khz to 100000 when new_clocks->dppclk_khz is 0 [How] Don't change new_clocks->dppclk_khz value when new_clocks->dppclk_khz is 0 Signed-off-by: Peikang Zhang <peikang.zhang@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Allow 4 split on 10K 420 modesChris Park2-5/+5
[Why] 10K YCbCr420 does not need ODM 4:1, but it requires MPC 4 split indicated on the flags. [How] Make pixel encoding and resolution size specific workaround to enable ODM combine on YCbCr420 high resolution modes. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: VSC SDP supported for SSTDerek Lai2-4/+2
[why] If a typeC to HDMI dongle supports YCbCr420 pass through and VSC colorimetry and pixel encoding formats in the Extended Receiver Capability, we shall allow VSC SDP to be used. [How] The Extended Receiver Capability field shall check the EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT bit in the TRAINING_AUX_RD_INTERVAL register. Removed DPCD rev checking for VSC SDP. Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fill in dmub_srv fw_version from firmware metadataNicholas Kazlauskas1-0/+10
[Why] DMCUB firmware version is now available from firmware metadata block. We should be passing this into dmub_srv so we can know when to apply firmware version specific functionality like using CW4 only instead of the REGION4. [How] We don't have the helpers for DM to actually extract out firmware metadata block themselves. We could add that and add helpers in DM to grab this, but not every creation sequence has firmware instruction before dmub_srv_create. Easiest way to handle this is to fill this in automatically per DM in the place we do have it - when calculating the region parameters. But only fill it in if DM already hasn't in case we need to override with a specific version. We aren't do anything firmware version specific in dmub_srv_create today that does require fw_version, so while it's a little unituitive to do it when calculating region parameters it works for now. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Enable output_bpc property on all outputsStylon Wang1-1/+3
[Why] Connector property output_bpc is available on DP/eDP only. New IGT tests would benifit if this property works on HDMI. [How] Enable this read-only property on all types of connectors. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Force ODM combine on 5K+ 420 modesChris Park1-0/+10
[Why] All YCbCr420 resolutions 5K and above have tiling and discoloration issues. The issue can be remedied by forcing ODM combine from 5K to 8K. 10K resolution requires ODM 4:1. The mechanism of what the real problem is, that is inherent in ODM combine programming, doesn't seem to be pointed at singular register programming (CLK, MPC, DCSURF, etc.), and needs more in-depth programming sequence review for these new use case scenarios. Until then, workaround to enable ODM combine is proposed. While it is not our policy, HW spreadsheet also recommends turning on ODM for these scenario to lower the voltage. [How] Make pixel encoding and resolution size specific workaround to enable ODM combine on YCbCr420 high resolution modes. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: fix 4to1 odm MPC_OUT_FLOW_CONTROL_COUNTDmytro Laktyushkin1-1/+1
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: use dispclk AVFS for dppclkBrandon Syu2-5/+14
[Why] There is using pixelclk AVFS for dppclk, that would cause issue. [How] To use dispclk AVFS for both dispclk and dppclk. There would choose dppclk for request voltage when dispclk wouldn't be updated case. If dispclk need to be updated, then it'll choose the bigger one from dppclk and dispclk for request voltage. Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: add mechanism to skip DCN initEric Yang10-72/+46
[Why] If optimized init is done in FW. DCN init be skipped in driver. This need to be communicated between driver and fw and maintain backwards compatibility. [How] Use DMUB scratch 0 bit 2 to indicate optimized init done in fw and use DMUB scatch 4 bit 0 to indicate drive supports the optimized flow so FW will perform it. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: fine tune logic of edid max TMDS clock checkDale Zhao2-6/+2
[WHY] Check max_tmds_clk_mhz firstly will restrict pixel clock under HDMI 1.4, thus HDMI2.0 port can't correctly support 4K 60Hz. [HOW] Fine tune the logic to check max_forum_tmds_clk_mhz firstly. Signed-off-by: Dale Zhao <dale.zhao@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Added local_sink null check before accessJake Wang1-2/+4
[Why & How] Need to check if local_sink is NULL before accessing. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: clip plane rects in DM before passing into DCAurabindo Pillai1-0/+25
[Why] DC global validation can fail when userspace requests to draw large plane without performing the clipping themselves. This is observed in the IGT kms_plane panning tests for 4K displays where they draw an 8K plane without any clipping while expecting only the top 4K to be drawn. [How] DRM already has helpers to take care of the clipping necessary and to mark whether a plane is visible or not, so make use of these helpers in DM before passing the plane to DC. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: 3.2.90Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.18Anthony Koo1-6/+39
[Header Changes] - Update scratch information for boot status Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Correctly respond in psr enablement interfaceCamille Cho1-2/+4
[Why] dc_link_set_psr_allow_active() always returns true, even in the case that PSR is not supported. [How] Hook up the return value of dc_link_set_psr_allow_active(). Signed-off-by: Camille Cho <Camille.Cho@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fix DML failures caused by doubled stereo viewportNicholas Kazlauskas2-2/+17
[Why] Side-by-side and Top-and-bottom stereo configurations fail DML mode validation due to Viewport exceeded. This is because we consider the planes as being pipe split in pipe population so we end up doubling the viewport width, eg. from 4k to 8k. [How] These pipes technically aren't hsplit, so add a check for determining whether is_hsplit should be set. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: enable assrBhawanpreet Lakha2-0/+38
[Why] assr is content protection for eDP, in order to use it we need to call psp ta (dtm) [How] We have a enable_assr callback, hook into this and call the correct psp cmd id to enable assr. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: implement edid max TMDS clock check in DCMichael Strauss2-0/+13
[WHY] Currently DC doesn't check requested pixel clock against an EDID specified TMDS max clock if it exists, passing modes that should fail [HOW] Add max TMDS clk to edid caps and perform check during validation Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.17Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fixed using wrong eDP power sequence function pointerYi-Ling Chen1-2/+2
[why] dc->hwss->edp_backlight_control is null, it would casue it only be off main-link of eDP. It is not worng behavior for eDP power sequence off. [how] Must use hwseq->funcs.edp_backlight_control finction pointer for edp backlight. Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Fix calculation of virtual channel payloadMikita Lipski2-11/+10
[why] The calculation of virtual channel payload would not take link settings in account. As we calculate VCPI slots needed both PBN for stream and also PBN per time slot. Before we would use generic PBN per time slot, which would not change with link settings causing wrong Payload allocation. [how] Provide PBN per time slot for each Virtual channel payload calculation. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: [FW Promotion] Release 1.0.16Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-17 10:07:44 +0000