summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc
AgeCommit message (Collapse)AuthorFilesLines
2019-09-27Merge tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drmLinus Torvalds12-20/+92
Pull drm fixes from Dave Airlie: "Fixes built up over the past 1.5 weeks or so, it's two weeks of amdgpu, some core cleanups and some panfrost fixes. I also finally figured out why my desktop was slow to do a bunch of stuff (someone gave it an IPv6 address which can't reach anything!). core: - Some cleanups and fixes in the self-refresh helpers - Some cleanups and fixes in the atomic helpers amdgpu: - Fix a 64 bit divide - Prevent a memory leak in a failure case in dc - Load proper gfx firmware on navi14 variants - Add more navi12 and navi14 PCI ids - Misc fixes for renoir - Fix bandwidth issues with multiple displays on vega20 - Support for Dali - Fix a possible oops with KFD on hawaii - Fix for backlight level after resume on some APUs - Other misc fixes panfrost: - Multiple panfrost fixes for regulator support and page fault handling" * tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/amd/display: prevent memory leak drm/amdgpu/gfx10: add support for wks firmware loading drm/amdgpu/display: include slab.h in dcn21_resource.c drm/amdgpu/display: fix 64 bit divide drm/panfrost: Prevent race when handling page fault drm/panfrost: Remove NULL checks for regulator drm/panfrost: Fix regulator_get_optional() misuse drm: Measure Self Refresh Entry/Exit times to avoid thrashing drm: Fix kerneldoc and remove unused struct member in self_refresh helper drm/atomic: Rename crtc_state->pageflip_flags to async_flip drm/atomic: Reject FLIP_ASYNC unconditionally drm/atomic: Take the atomic toys away from X drm/amdgpu: flag navi12 and 14 as experimental for 5.4 drm/kms: Duct-tape for mode object lifetime checks drm/amdgpu: add navi12 pci id drm/amdgpu: add navi14 PCI ID for work station SKU drm/amdkfd: Swap trap temporary registers in gfx10 trap handler drm/amd/powerplay: implement sysfs for getting dpm clock drm/amd/display: Restore backlight brightness after system resume drm/amd/display: Implement voltage limitation for dali ...
2019-09-25drm/amd/display: prevent memory leakNavid Emamdoost5-0/+5
In dcn*_create_resource_pool the allocated memory should be released if construct pool fails. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-24drm/amdgpu/display: include slab.h in dcn21_resource.cAlex Deucher1-0/+2
It's apparently needed in some configurations. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-24drm/amdgpu/display: fix 64 bit divideAlex Deucher1-1/+3
Use proper helper for 32 bit. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-20Merge tag 'kbuild-v5.4' of ↵Linus Torvalds5-24/+20
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - add modpost warn exported symbols marked as 'static' because 'static' and EXPORT_SYMBOL is an odd combination - break the build early if gold linker is used - optimize the Bison rule to produce .c and .h files by a single pattern rule - handle PREEMPT_RT in the module vermagic and UTS_VERSION - warn CONFIG options leaked to the user-space except existing ones - make single targets work properly - rebuild modules when module linker scripts are updated - split the module final link stage into scripts/Makefile.modfinal - fix the missed error code in merge_config.sh - improve the error message displayed on the attempt of the O= build in unclean source tree - remove 'clean-dirs' syntax - disable -Wimplicit-fallthrough warning for Clang - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC - remove ARCH_{CPP,A,C}FLAGS variables - add $(BASH) to run bash scripts - change *CFLAGS_<basetarget>.o to take the relative path to $(obj) instead of the basename - stop suppressing Clang's -Wunused-function warnings when W=1 - fix linux/export.h to avoid genksyms calculating CRC of trimmed exported symbols - misc cleanups * tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits) genksyms: convert to SPDX License Identifier for lex.l and parse.y modpost: use __section in the output to *.mod.c modpost: use MODULE_INFO() for __module_depends export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols export.h: remove defined(__KERNEL__), which is no longer needed kbuild: allow Clang to find unused static inline functions for W=1 build kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN kbuild: refactor scripts/Makefile.extrawarn merge_config.sh: ignore unwanted grep errors kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj) modpost: add NOFAIL to strndup modpost: add guid_t type definition kbuild: add $(BASH) to run scripts with bash-extension kbuild: remove ARCH_{CPP,A,C}FLAGS kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC kbuild: Do not enable -Wimplicit-fallthrough for clang for now kbuild: clean up subdir-ymn calculation in Makefile.clean kbuild: remove unneeded '+' marker from cmd_clean kbuild: remove clean-dirs syntax kbuild: check clean srctree even earlier ...
2019-09-17drm/amd/display: Implement voltage limitation for daliBhawanpreet Lakha1-0/+4
[Why] we only want the lowest voltage to be available for dali. [How] Use the get_highest_allowed_voltage_level function to return 0 for dali Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: Add missing HBM support and raise Vega20's uclk.Zhan Liu1-2/+16
[Why] When more than 2 displays are connected to the graphics card, only the minimum memory clock is needed. However, when more displays are connected, the minimum memory clock is not sufficient enough to support the overwhelming bandwidth. System will hang under this circumstance. Also, the old code didn't address HBM cards, which has 2 pseudo channels. We need to add the HBM part here. [How] When graphics card connects to 2 or more displays, switch to high memory clock. Also, choose memory multiplier based on whether its regular DRAM or HBM. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: dce11.x /dce12 update formula inputCharlene Liu5-13/+27
[Description] 1. OUTSTANDING_REQUEST_LIMIT update from 0xFF to 0x1F (HW doc update) 2. using memory type to convert UMC's MCLK to Yclk. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: Add stereo mux and dig programming calls for dcn21Roman Li2-5/+36
[Why] The earlier patch "Hook up calls to do stereo mux and dig programming..." doesn't include update for dcn21. [How] Align dcn21 gpio settings with updated stereo control interface. Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-04kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)Masahiro Yamada4-18/+14
Kbuild provides per-file compiler flag addition/removal: CFLAGS_<basetarget>.o CFLAGS_REMOVE_<basetarget>.o AFLAGS_<basetarget>.o AFLAGS_REMOVE_<basetarget>.o CPPFLAGS_<basetarget>.lds HOSTCFLAGS_<basetarget>.o HOSTCXXFLAGS_<basetarget>.o The <basetarget> is the filename of the target with its directory and suffix stripped. This syntax comes into a trouble when two files with the same basename appear in one Makefile, for example: obj-y += foo.o obj-y += dir/foo.o CFLAGS_foo.o := <some-flags> Here, the <some-flags> applies to both foo.o and dir/foo.o The real world problem is: scripts/kconfig/util.c scripts/kconfig/lxdialog/util.c Both files are compiled into scripts/kconfig/mconf, but only the latter should be given with the ncurses flags. It is more sensible to use the relative path to the Makefile, like this: obj-y += foo.o CFLAGS_foo.o := <some-flags> obj-y += dir/foo.o CFLAGS_dir/foo.o := <other-flags> At first, I attempted to replace $(basetarget) with $*. The $* variable is replaced with the stem ('%') part in a pattern rule. This works with most of cases, but does not for explicit rules. For example, arch/ia64/lib/Makefile reuses rule_as_o_S in its own explicit rules, so $* will be empty, resulting in ignoring the per-file AFLAGS. I introduced a new variable, target-stem, which can be used also from explicit rules. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marc Zyngier <maz@kernel.org>
2019-08-29drm/amd/display: Add DCN2.1 changes to DMLRoman Li2-0/+23
Hook up the DML changes for renoir. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Correct order of RV family clk managers for RenoirRoman Li1-6/+6
Need to check for renoir first. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: build dcn21 blocksBhawanpreet Lakha1-0/+3
Enable the building of dcn21 support. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: add dcn21 core DC changesBhawanpreet Lakha4-0/+11
Add missing parameters, to make dcn21 compile without errors Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: call update_bw_bounding_boxBhawanpreet Lakha2-0/+10
call update_bw_bounding_box in DC construct Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Handle Renoir in DCBhawanpreet Lakha2-0/+17
add Renoir DCN version in DC and handle it Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Fix register namesBhawanpreet Lakha1-2/+2
rename VM_CONTEXT0 to MMVM_CONTEXT0 as that is the name defined in the register files Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add Renoir DMLBhawanpreet Lakha6-0/+8058
DML provides the display configuration validation as provided by the hw teams. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add Renoir GPIOBhawanpreet Lakha7-0/+687
Misc display related configuration details. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add Renoir resource (v2)Bhawanpreet Lakha3-1/+1726
Manages the renoir display resources (crtcs, phys, plls, etc.). v2: rebase (Alex) Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add Renoir clock managerBhawanpreet Lakha7-0/+1013
Controls display clocks and interfaces with powerplay for clock and power requirements. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add Renoir Hubbub (v2)Bhawanpreet Lakha3-1/+728
Controls the display hw's interface to memory. v2: rebase (Alex) Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add Renoir hubbub registers listBhawanpreet Lakha3-0/+118
These are the registers used to program the hubbub hw. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add hubp block for Renoir (v2)Bhawanpreet Lakha3-0/+387
This provides the interface to memory for the display hw. v2: minor cleanup (Alex) Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add Renoir irq_services (v2)Bhawanpreet Lakha3-0/+418
Provides the interface to configure display interrrupts on renoir. v2: rebase fix (Alex) Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add pp_smu functions for RenoirBhawanpreet Lakha1-0/+47
This defines the interface for communicating requirements between DC and powerplay. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add Renoir hw_seq register listBhawanpreet Lakha1-0/+97
These are the registers used to for the hw sequences for modesetting. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add Renoir clock registers listBhawanpreet Lakha1-0/+17
These are the registers used to program the clock hw. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-27drm/amdgpu/display: fix build error without CONFIG_DRM_AMD_DC_DSC_SUPPORTYueHaibing1-0/+4
If CONFIG_DRM_AMD_DC_DSC_SUPPORT is not set, build fails: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c: In function dcn20_hw_sequencer_construct: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c:2099:28: error: dcn20_dsc_pg_control undeclared (first use in this function); did you mean dcn20_dpp_pg_control? dc->hwss.dsc_pg_control = dcn20_dsc_pg_control; ^~~~~~~~~~~~~~~~~~~~ dcn20_dpp_pg_control Use CONFIG_DRM_AMD_DC_DSC_SUPPORT to guard this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 8a31820b1218 ("drm/amd/display: Make init_hw and init_pipes generic for seamless boot") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: 3.2.48Anthony Koo1-1/+1
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: flicking observed while installing driver on Navi10 CFhersen wu2-27/+28
[WHY] value of dchub_ref_clock is decided by dchubbub global timer settings which is programmed by vbios command table disp_init. for multi-GPU case, vbios is posted only for primary GPU. without vbios posted for the secondary GPU, value of dchub_ref_clock is not set properly. this value will affect dcn bandwidth calcuation and cause underflow. user will see screen flicking during driver installation for dual GPU case. [HOW] dc init_hw always call vbios command table disp_init to make sure dchubbub global timer is configured and enable. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Properly read LVTMA_PWRSEQ_CNTLJoshua Aberback1-26/+17
[Why] The register LVTMA_PWRSEQ_CNTL is used to determine the power state of the embedded display. Currently we do not actually read this register's values, so during power down we think that this display is already off, so we skip calling into VBIOS to actually turn it off. [How] - add relevant fields to shift / mask initialization Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: revert wait in pipelockJun Lei1-11/+0
[why] Previous workaround to prevent a vsync flip to be converted to immediate flip is no longer needed, and is risky because there are cases where it can result in infinite loop. [how] Remove wait loop (which is potentially infinite) before locking pipe Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Use res_cap to acquire i2c instead of pipe countDerek Lai1-1/+2
[Why] We should be using the ddc_num from res_caps. As the pipe count != number of i2c resources. [How] Use ddc_num from res_cap instead of pipe count. Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Expose OTG_V_TOTAL_MID for HW DiagsBayan Zabihiyan9-4/+37
[Why] Existing HW Features, HW Diags test requested that the registers be exposed. [How] Add V_TOTAL_MID to existing DC structures. Make sure values are passed down throughout DC Add Register definition. Program the additional registers Add additional Logic for V_TOTAL_CONTROL. Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: fix DML not calculating delivery timeJun Lei1-0/+27
[why] Calculating DCFCLK DS time requires calculating delivery time for luma/chroma, but this value is not calculated in DMLv2, it was inadvertently removed when porting DMLv2 [how] Add the calculation back Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: set av_mute in hw_init for HDMICharlene Liu4-0/+28
[Description] OS will reserve HW state in UEFI mode. Driver init_hw reset to RGB which caused HDMI green in YCbCr mode. read HW blank_color based on acc_mode. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Add Logging for Gamma Related informationWyatt Wood1-6/+6
[Why] A recent bug showed that logging would be useful in debugging various gamma issues. [How] Add logging in dc. Fix formatting for easier graphing. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Enable HW rotationJaehyun Chung3-5/+60
[Why] HW rotation is not enabled. Calculations for cursor rotation are wrong for the values passed to set_cursor_position. [How] Swap Src rect and height and vertically mirror surface for the correct surface rotation direction. Cursor position is rotated according to angle. Offset calculations are tweaked for non-rotated cursor hotspot and width/height. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: add Cursor Degamma logic for DCN2Bayan Zabihiyan7-9/+15
[Why] We need to have the ability to to tell us set degamma on the cursor. [How] Pass a flag down to register programming that tells us if the current surface format needs cursor degamma. Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: fix odm validationDmytro Laktyushkin1-21/+19
Update bw validation to use prev and next odm pipe pointers for populating dml inputs. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: fix odm stream releaseDmytro Laktyushkin1-33/+32
Need to memset all odm pipes when calling dc_remove_stream_from_ctx Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: fix dcn20 odm dpp programmingDmytro Laktyushkin2-1/+7
dcn20 requires special casing for odm. This change treats odm as alternative to mpc tree on dcn20. This is planned to be fixed in a future refactor Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Fix number of slices not being checked for dscNikola Cornij1-1/+1
[why] num_slices_h was not being checked [How] Fix the typo and check num_slices_h Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: fix odm pipe copyDmytro Laktyushkin2-1/+7
ODM next and prev pipe were missing from dc_copy_state Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: fix trigger not generated for freesyncYogesh Mohan Marimuthu1-0/+3
[Why] In newer hardware MANUAL_FLOW_CONTROL is not a trigger bit. Due to this front porch is fixed and in these hardware freesync does not work. [How] Change the programming to generate a pulse so that the event will be triggered, front porch will be cut short and freesync will work. Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: fix stuck test pattern on right half of displayZi Yu Liao1-1/+1
[why] With visual confirm enabled, displays where ODM combine is enabled has a test pattern stuck on the right half of the display even though the display is unblanked. [how] Add a condition to not show the colour ramp test pattern when the display is unblanked. Signed-off-by: Zi Yu Liao <ziyu.liao@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: support spdifCharlene Liu2-11/+10
[Description] port spdif fix to staging: spdif hardwired to afmt inst 1. spdif func pointer spdif resource allocation (reserve last audio endpoint for spdif only) Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: 3.2.47Anthony Koo1-1/+1
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: remove unused functionQingqing Zhuo2-6/+0
[Why] This function is not being used, it was left in when introducing DCN2 [How] Remove the function Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-27 02:05:46 +0000