Age | Commit message (Collapse) | Author | Files | Lines |
|
Default value is auto, doesn't change
original reset method logic.
v2: change to use parameter reset_method
v3: add warn msg if specified mode isn't supported
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Init soc15 reg base early enough so we can touch
mailbox related registers in request full access
for sriov before set_ip_blocks, vi&nv arch doesn't
use reg base in virt ops.
v2: fix reg_base_init missed in bare metal case.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move request init data to virt detection func, so we
can insert request full access between request init data
and set ip blocks.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
accessing
The failed case is no SDMA1 IP for Renoir discovery table while in accessing SDMA1 reg base,
thus need have nullptr test for soc15_read_register invoked in MMR addres space inquire opt.
Signed-off-by: Prike.Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rather than relying on gpu info firmware.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add some APU flags to simplify handling of different APU
variants. It's easier to understand the special cases
if we use names flags rather than checking device ids and
silicon revisions.
v2: rebase on latest code
Acked-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Vram lost counter is wrongly increased by two during baco reset.
V2: assumed vram lost for mode1 reset on all ASICs
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable VCN2.5 DPG mode for arcturus after below items are applied.
ASD: 0x21000023
SOS: 0x17003B
VCN firmware Version ENC: 1.1 DEC: 1 VEP: 0 Revision: 16
VBIOS: 23
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
we need to move virt detection much earlier because:
1) HW team confirms us that RCC_IOV_FUNC_IDENTIFIER will always
be at DE5 (dw) mmio offset from vega10, this way there is no
need to implement detect_hw_virt() routine in each nbio/chip file.
for VI SRIOV chip (tonga & fiji), the BIF_IOV_FUNC_IDENTIFIER is at
0x1503
2) we need to acknowledged we are SRIOV VF before we do IP discovery because
the IP discovery content will be updated by host everytime after it recieved
a new coming "REQ_GPU_INIT_DATA" request from guest (there will be patches
for this new handshake soon).
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The ROMC_INDEX/DATA offset was changed to e4/e5 since
from smuio_v11 (vega20/arcturus).
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-by: Candice Li <Candice.Li@amd.com>
Reviewed-by: Candice Li <Candice.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
HDP ras error counters are dirty ones after cold reboot
Read operation is needed to reset them to 0
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's 25 Mhz (refclk / 4). This fixes the interpretation
of the rlc clock counter.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So don't use it.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Better clean that up before some automation starts to complain about it
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The only data fabric information the adev struct currently
contains is a function pointer table. In the near future,
we will be adding some cached DF information into adev. As
such, this patch creates a new amdgpu_df struct for adev.
Right now, it only containst the old function pointer table,
but new stuff will be added soon.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With default PSP FW loading
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This can save users much troubles. As they do not
actually need to care whether swSMU or traditional
powerplay routine should be used.
V2: apply the fixes to vi.c and cik.c also
V3: squash in oops fix
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Before, initialization of smu ip block would be skipped
for sriov ASICs. But if there's only one VF being used,
guest driver should be able to dump some HW info such as
clks, temperature,etc.
To solve this, now after onevf mode is enabled, host
driver will notify guest. If it's onevf mode, guest will
do smu hw_init and skip some steps in normal smu hw_init
flow because host driver has already done it for smu.
With this fix, guest app can talk with smu and dump hw
information from smu.
v2: refine the logic for pm_enabled.Skip hw_init by not
changing pm_enabled.
v3: refine is_support_sw_smu and fix some indentation
issue.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is used to determine whether runtime pm can be
supported or not.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1: compared to bare-metal: sriov support psp loading VCN firmware; only one
encoding ring would be used in each instance.
v2: keep unchange for bare-metal VCN2.5 hw_init, just add a flag with sriov
and also remove multiple lines.
v3: squash in warning fix
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Originally, due to the restriction from PSP and SMU, VF has
to send message to hypervisor driver to handle powerplay
change which is complicated and redundant. Currently, SMU
and PSP can support VF to directly handle powerplay
change by itself. Therefore, the old code about the handshake
between VF and PF to handle powerplay will be removed and VF
will use new the registers below to handshake with SMU.
mmMP1_SMN_C2PMSG_101: register to handle SMU message
mmMP1_SMN_C2PMSG_102: register to handle SMU parameter
mmMP1_SMN_C2PMSG_103: register to handle SMU response
v2: remove module parameter pp_one_vf
v3: fix the parens
v4: forbid vf to change smu feature
v5: use hwmon_attributes_visible to skip sepicified hwmon atrribute
v6: change skip condition at vega10_copy_table_to_smc
Signed-off-by: Yintian Tao <yttao@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Switch to baco reset method for ras recovery if the PMFW supported.
If not, keep the original reset method.
v2: revise the condition
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit a4840d91c984f93b2acdcd44441d624bbc1af0d2.
Reverting due to power efficiency issues seen on Raven 1 and 2
when DPG mode is enabled.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently ARCTURUS VF doesn't support jpeg ip block.
Skip jpeg ip block in case guest driver load fail.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Zhexi Zhang <zhexi.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
BACO - Bus Active, Chip Off
So we can use it for power savings rather than just reset.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
BACO - Bus Active, Chip Off
Check the BACO capabilities from the powerplay table.
v2: drop unrelated struct cleanup
Reviewed-by: Evan Quan <evan.quan@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable baco reset support on Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move reset_method next to reset callback to match the struct layout and
the other definition in this file.
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It also doen't care about FW loading type, so enabling it directly.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Arcturus VCN and JPEG only got CG support, and no PG support
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
By adding JPEG IP block to the family
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
And enable them for Navi1x and Renoir
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To properly handle the option parsing ordering.
Reviewed-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's safe to enable dynamic VCN powergating on raven and
raven2 for increased power savings.
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow userspace to read the same status registers for every family.
Based on commit c7890fea, added any of these registers if defined in
the include files of each architecture.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for vega20 when the swSMU path is used.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It was a vega20 specific hack. Check if we are in reset
and what reset method we are using.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Workaround to make RAS recovery work in BACO reset.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
An earlier patch of mine disabled some #warning statements
that get in the way of build testing, but then another
instance was added around the same time.
Remove that as well.
Fixes: b5203d16aef4 ("drm/amd/amdgpu: hide #warning for missing DC config")
Fixes: e1c14c43395c ("drm/amdgpu: Enable DC on Renoir")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We reset the GPU as part of our hibernation sequence so we need
to make sure we don't mark vram as lost in that case.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111879
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ip block setting for Arcturus SRIOV
1.PSP need to be initialized before IH.
2.SMU doesn't need to be initialized at kmd driver.
3.Arcturus doesn't support DCE hardware,it needs to skip
register access to DCE.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
enable/disable IH clock gating on soc15 projects.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add a common nbio ras fini implementation to cleanup nbio ras framework
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Renoir need to use mode2 mode to implement GPU RESET
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Needs more work to enable via front door loading.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
enable psp block for firmware loading and other security
feature setup.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To avoid NULL function pointer access. This happens on VG10, reboot
command hangs and have to power off/on to reboot the machine. This is
serial console log:
[ OK ] Reached target Unmount All Filesystems.
[ OK ] Reached target Final Step.
Starting Reboot...
[ 305.696271] systemd-shutdown[1]: Syncing filesystems and block
devices.
[ 306.947328] systemd-shutdown[1]: Sending SIGTERM to remaining
processes...
[ 306.963920] systemd-journald[1722]: Received SIGTERM from PID 1
(systemd-shutdow).
[ 307.322717] systemd-shutdown[1]: Sending SIGKILL to remaining
processes...
[ 307.336472] systemd-shutdown[1]: Unmounting file systems.
[ 307.454202] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 307.480523] systemd-shutdown[1]: All filesystems unmounted.
[ 307.486537] systemd-shutdown[1]: Deactivating swaps.
[ 307.491962] systemd-shutdown[1]: All swaps deactivated.
[ 307.497624] systemd-shutdown[1]: Detaching loop devices.
[ 307.504418] systemd-shutdown[1]: All loop devices detached.
[ 307.510418] systemd-shutdown[1]: Detaching DM devices.
[ 307.565907] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 307.731313] BUG: kernel NULL pointer dereference, address:
0000000000000000
[ 307.738802] #PF: supervisor read access in kernel mode
[ 307.744326] #PF: error_code(0x0000) - not-present page
[ 307.749850] PGD 0 P4D 0
[ 307.752568] Oops: 0000 [#1] SMP PTI
[ 307.756314] CPU: 3 PID: 1 Comm: systemd-shutdow Not tainted
5.2.0-rc1-kfd-yangp #453
[ 307.764644] Hardware name: ASUS All Series/Z97-PRO(Wi-Fi ac)/USB 3.1,
BIOS 9001 03/07/2016
[ 307.773580] RIP: 0010:soc15_common_hw_fini+0x33/0xc0 [amdgpu]
[ 307.779760] Code: 89 fb e8 60 f5 ff ff f6 83 50 df 01 00 04 75 3d 48
8b b3 90 7d 00 00 48 c7 c7 17 b8 530
[ 307.799967] RSP: 0018:ffffac9483153d40 EFLAGS: 00010286
[ 307.805585] RAX: 0000000000000000 RBX: ffff9eb299da0000 RCX:
0000000000000006
[ 307.813261] RDX: 0000000000000000 RSI: ffff9eb29e3508a0 RDI:
ffff9eb29e350000
[ 307.820935] RBP: ffff9eb299da0000 R08: 0000000000000000 R09:
0000000000000000
[ 307.828609] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff9eb299dbd1f8
[ 307.836284] R13: ffffffffc04f8368 R14: ffff9eb29cebd130 R15:
0000000000000000
[ 307.843959] FS: 00007f06721c9940(0000) GS:ffff9eb2a18c0000(0000)
knlGS:0000000000000000
[ 307.852663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 307.858842] CR2: 0000000000000000 CR3: 000000081d798005 CR4:
00000000001606e0
[ 307.866516] Call Trace:
[ 307.869169] amdgpu_device_ip_suspend_phase2+0x80/0x110 [amdgpu]
[ 307.875654] ? amdgpu_device_ip_suspend_phase1+0x4d/0xd0 [amdgpu]
[ 307.882230] amdgpu_device_ip_suspend+0x2e/0x60 [amdgpu]
[ 307.887966] amdgpu_pci_shutdown+0x2f/0x40 [amdgpu]
[ 307.893211] pci_device_shutdown+0x31/0x60
[ 307.897613] device_shutdown+0x14c/0x1f0
[ 307.901829] kernel_restart+0xe/0x50
[ 307.905669] __do_sys_reboot+0x1df/0x210
[ 307.909884] ? task_work_run+0x73/0xb0
[ 307.913914] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 307.918970] do_syscall_64+0x4a/0x1c0
[ 307.922904] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 307.928336] RIP: 0033:0x7f0671cf8373
[ 307.932176] Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00
00 0f 1f 44 00 00 89 fa be 69 19 128
[ 307.952384] RSP: 002b:00007ffdd1723d68 EFLAGS: 00000202 ORIG_RAX:
00000000000000a9
[ 307.960527] RAX: ffffffffffffffda RBX: 0000000001234567 RCX:
00007f0671cf8373
[ 307.968201] RDX: 0000000001234567 RSI: 0000000028121969 RDI:
00000000fee1dead
[ 307.975875] RBP: 00007ffdd1723dd0 R08: 0000000000000000 R09:
0000000000000000
[ 307.983550] R10: 0000000000000002 R11: 0000000000000202 R12:
00007ffdd1723dd8
[ 307.991224] R13: 0000000000000000 R14: 0000001b00000004 R15:
00007ffdd17240c8
[ 307.998901] Modules linked in: xt_MASQUERADE nfnetlink iptable_nat
xt_addrtype xt_conntrack nf_nat nf_cos
[ 308.026505] CR2: 0000000000000000
[ 308.039998] RIP: 0010:soc15_common_hw_fini+0x33/0xc0 [amdgpu]
[ 308.046180] Code: 89 fb e8 60 f5 ff ff f6 83 50 df 01 00 04 75 3d 48
8b b3 90 7d 00 00 48 c7 c7 17 b8 530
[ 308.066392] RSP: 0018:ffffac9483153d40 EFLAGS: 00010286
[ 308.072013] RAX: 0000000000000000 RBX: ffff9eb299da0000 RCX:
0000000000000006
[ 308.079689] RDX: 0000000000000000 RSI: ffff9eb29e3508a0 RDI:
ffff9eb29e350000
[ 308.087366] RBP: ffff9eb299da0000 R08: 0000000000000000 R09:
0000000000000000
[ 308.095042] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff9eb299dbd1f8
[ 308.102717] R13: ffffffffc04f8368 R14: ffff9eb29cebd130 R15:
0000000000000000
[ 308.110394] FS: 00007f06721c9940(0000) GS:ffff9eb2a18c0000(0000)
knlGS:0000000000000000
[ 308.119099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 308.125280] CR2: 0000000000000000 CR3: 000000081d798005 CR4:
00000000001606e0
[ 308.135304] printk: systemd-shutdow: 3 output lines suppressed due to
ratelimiting
[ 308.143518] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000009
[ 308.151798] Kernel Offset: 0x15000000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xff)
[ 308.171775] ---[ end Kernel panic - not syncing: Attempted to kill
init! exitcode=0x00000009 ]---
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add sw_fini interface of df_funcs.
This interface will remove sysfs file of df_cntr_avail
function.
The old behavior only create sysfs of df_cntr_avail
in sw_init, but never remove it for lack of sw_fini
interface. With this,driver will report create
sysfs fail when it's loaded for the second time.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
call helper function in late init phase to handle ras init
for nbio ip block
v2: init local var r to 0 in case the function return failure
on asics that don't have ras_late_init implementation
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
no functional change, just switch to new structures
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|