summaryrefslogtreecommitdiff
path: root/drivers/dma/dma-axi-dmac.c
AgeCommit message (Collapse)AuthorFilesLines
2019-12-11dmaengine: axi-dmac: add a check for devm_regmap_init_mmioChuhong Yuan1-1/+9
The driver misses checking the result of devm_regmap_init_mmio(). Add a check to fix it. Fixes: fc15be39a827 ("dmaengine: axi-dmac: add regmap support") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20191209085711.16001-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-17Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-10/+191
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
2019-06-14dmaengine: axi-dmac: add regmap supportAlexandru Ardelean1-0/+41
The registers for AXI DMAC are detailed at: https://wiki.analog.com/resources/fpga/docs/axi_dmac#register_map This change adds regmap support for these registers, in case some wants to have a more direct access to them via this interface. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> [vkoul: fixed code style issue] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: axi-dmac: terminate early DMA transfers after a partial oneAlexandru Ardelean1-1/+4
When a partial transfer is received, the driver should not submit any more segments to the hardware, as they will be ignored/unused until a new transfer start operation is done. This change implements this by adding a new flag on the AXI DMAC descriptor. This flags is set to true, if there was a partial transfer in a previously completed segment. When that flag is true, the TLAST flag is added to the to the submitted segment, signaling the controller to stop receiving more segments. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-14dmaengine: axi-dmac: populate residue info for completed xfersAlexandru Ardelean1-1/+98
Starting with version 4.2.a, the AXI DMAC controller can report partial transfers that have been issued. This change implements computing DMA residue information for transfers, based on that reported information. The way this is done, is to dequeue the partial transfers from the FIFO of partial transfers, store the partial length to the correct segment & descriptor, and compute the residue before submitting the DMA cookie to the DMA framework. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-10dmaengine: axi-dmac: update license headerAlexandru Ardelean1-3/+2
The change replaces the old license information in the comment header with the new SPDX license specifier. As well as bumping the year range from 2013-2015 to 2013-2019. The latter also reflects recent changes that were added to the driver. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177Thomas Gleixner1-2/+1
Based on 1 normalized pattern(s): licensed under the gpl 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27dmaengine: axi-dmac: assign `copy_align` propertyAlexandru Ardelean1-0/+2
The `copy_align` property is a generic property that describes alignment for DMA memcpy & sg ops. It serves mostly an informational purpose, and can be used in DMA tests, to pass the info to know what alignment to expect. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-27dmaengine: axi-dmac: Discover length alignment requirementLars-Peter Clausen1-5/+18
Starting with version 4.1.a the AXI-DMAC is capable of reporting the required length alignment. The LSBs that are required to be set for alignment will always read back as set from the transfer length register. It is not possible to clear them by writing a 0. This means the driver can discover the length alignment requirement by writing 0 to that register and reading back the value. Since the DMA will support length alignment requirements that are different from the address alignment requirement track both of them independently. For older versions of the peripheral assume that the length alignment requirement is equal to the address alignment requirement. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21dmaengine: axi-dmac: Sanity check memory mapped interface supportLars-Peter Clausen1-2/+22
The AXI-DMAC supports different types of interface for the data source and destination ports. Typically one of those ports is a memory-mapped interface while the other is some kind of streaming interface. The information about which kind of interface is used for each port is encoded in the devicetree. It is also possible in the driver to detect whether a port supports memory-mapped transfers or not. For streaming interfaces the address register is read-only and will always return 0. So in order to check if a port supports memory-mapped transfers write a non-zero value to the corresponding address register and check that the value read-back is still non zero. This allows to detect mismatches between the devicetree description and the actual hardware configuration. Unfortunately it is not possible to autodetect the interface types since there is no method to distinguish between the different streaming ports. So the best thing that can be done is to error out when a memory mapped port is described in the devicetree but none is detected in the hardware. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21dmaengine: axi-dmac: Enable TLAST handlingMichael Hennerich1-0/+2
The TLAST flag is used by the DMAC HDL controller to signal to the controller that the following segment (to be submitted) is the last one (in a series of segments). A receiver DMA (typically another DMAC) can read this parameter (from the transfer), and terminate the transfer earlier. A typical use-case for this, is when the receiver expects a certain amount of segments, but for some reason (e.g. an ADC capture which can have an unknown number of digital samples) the number of actual segments is smaller. The receiver would read this flag, and then the DMAC would finish. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21dmaengine: axi-dmac: Add support for interleaved cyclic transfersDragos Bogdan1-0/+3
The DMAC HDL core supports interleaved & cyclic transfers. An example use-case for this mode is when the controller is used as a video DMA. This change sets the `cyclic` field to true, so that when the IRQ comes and the `axi_dmac_transfer_done()` callback is called (from the interrupt handler) the proper `vchan_cyclic_callback()` is called. This way the DMAEngine framework will process data correctly for interleaved + cyclic transfers. This doesn't fix anything. It's an enhancement to the driver. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-04-24dmaengine: axi-dmac: Enable DMA_INTERLEAVE capabilityDragos Bogdan1-0/+1
Since device_prep_interleaved_dma() is already implemented, the DMA_INTERLEAVE capability should be set. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-04-24dmaengine: axi-dmac: Don't check the number of frames for alignmentAlexandru Ardelean1-1/+1
In 2D transfers (for the AXI DMAC), the number of frames (numf) represents Y_LENGTH, and the length of a frame is X_LENGTH. 2D transfers are useful for video transfers where screen resolutions ( X * Y ) are typically aligned for X, but not for Y. There is no requirement for Y_LENGTH to be aligned to the bus-width (or anything), and this is also true for AXI DMAC. Checking the Y_LENGTH for alignment causes false errors when initiating DMA transfers. This change fixes this by checking only that the Y_LENGTH is non-zero. Fixes: 0e3b67b348b8 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-04-24dmaengine: axi-dmac: Infer synthesis configuration parameters hardwareLars-Peter Clausen1-12/+20
Some synthesis time configuration parameters of the DMA controller can be inferred from the hardware itself. Use this information as it is more reliably than the information specified in the devicetree which might be outdated if the HDL project got changed. Deprecate the devicetree properties that can be inferred from the hardware itself. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-03-25dmaengine: axi-dmac: Split too large segmentsLars-Peter Clausen1-20/+61
The axi-dmac driver currently rejects transfers with segments that are larger than what the hardware can handle. Re-work the driver so that these large segments are split into multiple segments instead where each segment is smaller or equal to the maximum segment size. This allows the driver to handle transfers with segments of arbitrary size. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com> Signed-off-by: Alexandru Ardelean <alex.ardelean@analog.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-20dmaengine: axi-dmac: Use struct_size() in kzalloc()Gustavo A. R. Silva1-2/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-05-02dmaengine: axi-dmac: Request IRQ with IRQF_SHAREDMoritz Fischer1-1/+1
Request IRQ with IRQF_SHARED flag to enable setups with multiple instances of the core sharing a single IRQ line. This works out since the IRQ handler already checks if there is an actual IRQ pending and returns IRQ_NONE otherwise. Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2017-09-17dmaengine: axi-dmac: Fix software cyclic modeLars-Peter Clausen1-18/+51
When running in software cyclic mode the driver currently does not go back to the first segment once the last segment has been reached. Effectively making the transfer non-cyclic. Fix this by going back to the first segment once the last segment has been reached for cyclic transfers. Special care need to be taken to avoid a segment from being submitted multiple times concurrently, which could happen for transfers with a number of segments that is smaller than the DMA controller's internal queue. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-09-17dmaengine: axi-dmac: Only use hardware cyclic mode for single segment transfersLars-Peter Clausen1-2/+4
In hardware cyclic mode the submitted segment is repeated. This means hardware cyclic mode can only be used if the transfer has a single segment. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-01dmaengine: axi-dmac: Return IRQ_NONE if no IRQs are pendingLars-Peter Clausen1-0/+3
Return IRQ_NONE in the interrupt handler when it is called but no IRQs are pending. This allows the system to recover in case of an interrupt storm e.g. due to a wrong interrupt configuration setup. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-01dmaengine: axi-dmac: Propagate errors from platform_get_irq()Lars-Peter Clausen1-1/+3
Propagate errors returned by platform_get_irq() to the driver core. This will enable proper probe deferring for the driver in case the IRQ provider has not been registered yet. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-01dmaengine: axi-dmac: Add MODULE_DEVICE_TABLE()Lars-Peter Clausen1-0/+1
Add MODULE_DEVICE_TABLE() for the axi-dmac driver. This allows the driver to be loaded on demand when built as a module. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-11-16dmaengine: axi_dmac: Add synchronization supportLars-Peter Clausen1-0/+8
Implement the new device_synchronize() callback to allow proper synchronization when stopping a channel. Since the driver already makes sure that no new complete callbacks are scheduled after the device_terminate_all() callback has been called, all left to do in the device_synchronize() callback is to wait for all currently running complete callbacks to finish. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-23dmaengine: Add support for the Analog Devices AXI-DMAC DMA controllerLars-Peter Clausen1-0/+691
Add support for the Analog Devices AXI-DMAC DMA controller. This controller is a soft peripheral that can be instantiated in a FPGA and is often used in Analog Devices' reference designs for FPGA platforms. The peripheral has various configuration options that can be selected at synthesis time and influence the supported features of the instantiated peripheral, those options are represented as device-tree properties to allow the driver to behave accordingly. The peripheral has a zero latency architecture, which means it is possible to switch from one to the next descriptor without any delay. This is archived by having a internal queue which can hold multiple descriptors. The driver supports this, which means it will submit new descriptors directly to the hardware until the queue is full and not wait for a descriptor to complete before the next one is submitted. Interrupts are used for the descriptor queue flow control. Currently the driver supports SG, cyclic and interleaved slave DMA. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>