summaryrefslogtreecommitdiff
path: root/drivers/android
AgeCommit message (Collapse)AuthorFilesLines
2018-10-02binder: make symbol 'binder_free_buf' staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/android/binder.c:3312:1: warning: symbol 'binder_free_buf' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-16Merge b4.19-rc4 into char-misc-nextGreg Kroah-Hartman1-8/+35
We want the bugfixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14binder: Add BINDER_GET_NODE_INFO_FOR_REF ioctl.Martijn Coenen1-0/+55
This allows the context manager to retrieve information about nodes that it holds a reference to, such as the current number of references to those nodes. Such information can for example be used to determine whether the servicemanager is the only process holding a reference to a node. This information can then be passed on to the process holding the node, which can in turn decide whether it wants to shut down to reduce resource usage. Signed-off-by: Martijn Coenen <maco@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14android: binder: use kstrdup instead of open-coding itRasmus Villemoes1-2/+1
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14binder: use standard functions to allocate fdsTodd Kjos3-165/+260
Binder uses internal fs interfaces to allocate and install fds: __alloc_fd __fd_install __close_fd get_files_struct put_files_struct These were used to support the passing of fds between processes as part of a transaction. The actual allocation and installation of the fds in the target process was handled by the sending process so the standard functions, alloc_fd() and fd_install() which assume task==current couldn't be used. This patch refactors this mechanism so that the fds are allocated and installed by the target process allowing the standard functions to be used. The sender now creates a list of fd fixups that contains the struct *file and the address to fixup with the new fd once it is allocated. This list is processed by the target process when the transaction is dequeued. A new error case is introduced by this change. If an async transaction with file descriptors cannot allocate new fds in the target (probably due to out of file descriptors), the transaction is discarded with a log message. In the old implementation this would have been detected in the sender context and failed prior to sending. Signed-off-by: Todd Kjos <tkjos@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-14android: binder: no outgoing transaction when thread todo has transactionSherry Yang1-12/+32
When a process dies, failed reply is sent to the sender of any transaction queued on a dead thread's todo list. The sender asserts that the received failed reply corresponds to the head of the transaction stack. This assert can fail if the dead thread is allowed to send outgoing transactions when there is already a transaction on its todo list, because this new transaction can end up on the transaction stack of the original sender. The following steps illustrate how this assertion can fail. 1. Thread1 sends txn19 to Thread2 (T1->transaction_stack=txn19, T2->todo+=txn19) 2. Without processing todo list, Thread2 sends txn20 to Thread1 (T1->todo+=txn20, T2->transaction_stack=txn20) 3. T1 processes txn20 on its todo list (T1->transaction_stack=txn20->txn19, T1->todo=<empty>) 4. T2 dies, T2->todo cleanup attempts to send failed reply for txn19, but T1->transaction_stack points to txn20 -- assertion failes Step 2. is the incorrect behavior. When there is a transaction on a thread's todo list, this thread should not be able to send any outgoing synchronous transactions. Only the head of the todo list needs to be checked because only threads that are waiting for proc work can directly receive work from another thread, and no work is allowed to be queued on such a thread without waking up the thread. This patch also enforces that a thread is not waiting for proc work when a work is directly enqueued to its todo list. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Reviewed-by: Martijn Coenen <maco@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12android: binder: fix the race mmap and alloc_new_buf_lockedMinchan Kim1-8/+35
There is RaceFuzzer report like below because we have no lock to close below the race between binder_mmap and binder_alloc_new_buf_locked. To close the race, let's use memory barrier so that if someone see alloc->vma is not NULL, alloc->vma_vm_mm should be never NULL. (I didn't add stable mark intentionallybecause standard android userspace libraries that interact with binder (libbinder & libhwbinder) prevent the mmap/ioctl race. - from Todd) " Thread interleaving: CPU0 (binder_alloc_mmap_handler) CPU1 (binder_alloc_new_buf_locked) ===== ===== // drivers/android/binder_alloc.c // #L718 (v4.18-rc3) alloc->vma = vma; // drivers/android/binder_alloc.c // #L346 (v4.18-rc3) if (alloc->vma == NULL) { ... // alloc->vma is not NULL at this point return ERR_PTR(-ESRCH); } ... // #L438 binder_update_page_range(alloc, 0, (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr); // In binder_update_page_range() #L218 // But still alloc->vma_vm_mm is NULL here if (need_mm && mmget_not_zero(alloc->vma_vm_mm)) alloc->vma_vm_mm = vma->vm_mm; Crash Log: ================================================================== BUG: KASAN: null-ptr-deref in __atomic_add_unless include/asm-generic/atomic-instrumented.h:89 [inline] BUG: KASAN: null-ptr-deref in atomic_add_unless include/linux/atomic.h:533 [inline] BUG: KASAN: null-ptr-deref in mmget_not_zero include/linux/sched/mm.h:75 [inline] BUG: KASAN: null-ptr-deref in binder_update_page_range+0xece/0x18e0 drivers/android/binder_alloc.c:218 Write of size 4 at addr 0000000000000058 by task syz-executor0/11184 CPU: 1 PID: 11184 Comm: syz-executor0 Not tainted 4.18.0-rc3 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x16e/0x22c lib/dump_stack.c:113 kasan_report_error mm/kasan/report.c:352 [inline] kasan_report+0x163/0x380 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x140/0x1a0 mm/kasan/kasan.c:267 kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278 __atomic_add_unless include/asm-generic/atomic-instrumented.h:89 [inline] atomic_add_unless include/linux/atomic.h:533 [inline] mmget_not_zero include/linux/sched/mm.h:75 [inline] binder_update_page_range+0xece/0x18e0 drivers/android/binder_alloc.c:218 binder_alloc_new_buf_locked drivers/android/binder_alloc.c:443 [inline] binder_alloc_new_buf+0x467/0xc30 drivers/android/binder_alloc.c:513 binder_transaction+0x125b/0x4fb0 drivers/android/binder.c:2957 binder_thread_write+0xc08/0x2770 drivers/android/binder.c:3528 binder_ioctl_write_read.isra.39+0x24f/0x8e0 drivers/android/binder.c:4456 binder_ioctl+0xa86/0xf34 drivers/android/binder.c:4596 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x154/0xd40 fs/ioctl.c:686 ksys_ioctl+0x94/0xb0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x43/0x50 fs/ioctl.c:706 do_syscall_64+0x167/0x4b0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe " Signed-off-by: Todd Kjos <tkjos@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Martijn Coenen <maco@android.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-08android: binder: Rate-limit debug and userspace triggered err msgsSherry Yang2-17/+29
Use rate-limited debug messages where userspace can trigger excessive log spams. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02android: binder: Show extra_buffers_size in traceSherry Yang1-2/+5
Add extra_buffers_size to the binder_transaction_alloc_buf tracepoint. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-24android: binder: Include asm/cacheflush.h after linux/ include filesGuenter Roeck1-1/+3
If asm/cacheflush.h is included first, the following build warnings are seen with sparc32 builds. In file included from arch/sparc/include/asm/cacheflush.h:11:0, from drivers/android/binder.c:54: arch/sparc/include/asm/cacheflush_32.h:40:37: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration Moving the asm/ include after linux/ includes solves the problem. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-24android: binder_alloc: Include asm/cacheflush.h after linux/ include filesGuenter Roeck1-1/+1
If asm/cacheflush.h is included first, the following build warnings are seen with sparc32 builds. In file included from ./arch/sparc/include/asm/cacheflush.h:11:0, from drivers/android/binder_alloc.c:20: ./arch/sparc/include/asm/cacheflush_32.h:40:37: warning: 'struct page' declared inside parameter list Moving the asm/ include after linux/ includes fixes the problem. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07android: binder: Drop dependency on !M68KGeert Uytterhoeven1-1/+1
As of commit 7124330dabe5b3cb ("m68k/uaccess: Revive 64-bit get_user()"), the 64-bit Android binder interface builds fine on m68k. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-2/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-14android: binder: Change return type to vm_fault_tSouptick Joarder1-1/+1
Use new return type vm_fault_t for fault handler in struct vm_operations_struct. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Reference id -> 1c8f422059ae ("mm: change return type to vm_fault_t") Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14ANDROID: binder: change down_write to down_readMinchan Kim2-4/+6
binder_update_page_range needs down_write of mmap_sem because vm_insert_page need to change vma->vm_flags to VM_MIXEDMAP unless it is set. However, when I profile binder working, it seems every binder buffers should be mapped in advance by binder_mmap. It means we could set VM_MIXEDMAP in binder_mmap time which is already hold a mmap_sem as down_write so binder_update_page_range doesn't need to hold a mmap_sem as down_write. Please use proper API down_read. It would help mmap_sem contention problem as well as fixing down_write abuse. Ganesh Mahendran tested app launching and binder throughput test and he said he couldn't find any problem and I did binder latency test per Greg KH request(Thanks Martijn to teach me how I can do) I cannot find any problem, too. Cc: Ganesh Mahendran <opensource.ganesh@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Todd Kjos <tkjos@google.com> Reviewed-by: Martijn Coenen <maco@android.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14ANDROID: binder: correct the cmd print for BINDER_WORK_RETURN_ERROR宋金时1-1/+2
When to execute binder_stat_br the e->cmd has been modifying as BR_OK instead of the original return error cmd, in fact we want to know the original return error, such as BR_DEAD_REPLY or BR_FAILED_REPLY, etc. instead of always BR_OK, in order to avoid the value of the e->cmd is always BR_OK, so we need assign the value of the e->cmd to cmd before e->cmd = BR_OK. Signed-off-by: songjinshi <songjinshi@xiaomi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14ANDROID: binder: remove 32-bit binder interface.Martijn Coenen2-18/+1
New devices launching with Android P need to use the 64-bit binder interface, even on 32-bit SoCs [0]. This change removes the Kconfig option to select the 32-bit binder interface. We don't think this will affect existing userspace for the following reasons: 1) The latest Android common tree is 4.14, so we don't believe any Android devices are on kernels >4.14. 2) Android devices launch on an LTS release and stick with it, so we wouldn't expect devices running on <= 4.14 now to upgrade to 4.17 or later. But even if they did, they'd rebuild the world (kernel + userspace) anyway. 3) Other userspaces like 'anbox' are already using the 64-bit interface. Note that this change doesn't remove the 32-bit UAPI itself; the reason for that is that Android userspace always uses the latest UAPI headers from upstream, and userspace retains 32-bit support for devices that are upgrading. This will be removed as well in 2-3 years, at which point we can remove the code from the UAPI as well. Finally, this change introduces build errors on archs where 64-bit get_user/put_user is not supported, so make binder unavailable on m68k (which wouldn't want it anyway). [0]: https://android-review.googlesource.com/c/platform/build/+/595193 Signed-off-by: Martijn Coenen <maco@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-30Merge 4.17-rc3 into char-misc-nextGreg Kroah-Hartman1-0/+8
We want the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23ANDROID: binder: re-order some conditionsDan Carpenter1-2/+2
It doesn't make any difference to runtime but I've switched these two checks to make my static checker happy. The problem is that "buffer->data_size" is user controlled and if it's less than "sizeo(*hdr)" then that means "offset" can be more than "buffer->data_size". It's just cleaner to check it in the other order. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Martijn Coenen <maco@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23ANDROID: binder: prevent transactions into own process.Martijn Coenen1-0/+8
This can't happen with normal nodes (because you can't get a ref to a node you own), but it could happen with the context manager; to make the behavior consistent with regular nodes, reject transactions into the context manager by the process owning it. Reported-by: syzbot+09e05aba06723a94d43d@syzkaller.appspotmail.com Signed-off-by: Martijn Coenen <maco@android.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-16ANDROID: binder: synchronize_rcu() when using POLLFREE.Martijn Coenen1-0/+9
To prevent races with ep_remove_waitqueue() removing the waitqueue at the same time. Reported-by: syzbot+a2a3c4909716e271487e@syzkaller.appspotmail.com Signed-off-by: Martijn Coenen <maco@android.com> Cc: stable <stable@vger.kernel.org> # 4.14+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-16binder: replace "%p" with "%pK"Todd Kjos1-4/+4
The format specifier "%p" can leak kernel addresses. Use "%pK" instead. There were 4 remaining cases in binder.c. Signed-off-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-16ANDROID: binder: remove WARN() for redundant txn errorTodd Kjos1-2/+8
binder_send_failed_reply() is called when a synchronous transaction fails. It reports an error to the thread that is waiting for the completion. Given that the transaction is synchronous, there should never be more than 1 error response to that thread -- this was being asserted with a WARN(). However, when exercising the driver with syzbot tests, cases were observed where multiple "synchronous" requests were sent without waiting for responses, so it is possible that multiple errors would be reported to the thread. This testing was conducted with panic_on_warn set which forced the crash. This is easily reproduced by sending back-to-back "synchronous" transactions without checking for any response (eg, set read_size to 0): bwr.write_buffer = (uintptr_t)&bc1; bwr.write_size = sizeof(bc1); bwr.read_buffer = (uintptr_t)&br; bwr.read_size = 0; ioctl(fd, BINDER_WRITE_READ, &bwr); sleep(1); bwr2.write_buffer = (uintptr_t)&bc2; bwr2.write_size = sizeof(bc2); bwr2.read_buffer = (uintptr_t)&br; bwr2.read_size = 0; ioctl(fd, BINDER_WRITE_READ, &bwr2); sleep(1); The first transaction is sent to the servicemanager and the reply fails because no VMA is set up by this client. After binder_send_failed_reply() is called, the BINDER_WORK_RETURN_ERROR is sitting on the thread's todo list since the read_size was 0 and the client is not waiting for a response. The 2nd transaction is sent and the BINDER_WORK_RETURN_ERROR has not been consumed, so the thread's reply_error.cmd is still set (normally cleared when the BINDER_WORK_RETURN_ERROR is handled). Therefore when the servicemanager attempts to reply to the 2nd failed transaction, the error is already set and it triggers this warning. This is a user error since it is not waiting for the synchronous transaction to complete. If it ever does check, it will see an error. Changed the WARN() to a pr_warn(). Signed-off-by: Todd Kjos <tkjos@android.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-16binder: check for binder_thread allocation failure in binder_poll()Eric Biggers1-0/+2
If the kzalloc() in binder_get_thread() fails, binder_poll() dereferences the resulting NULL pointer. Fix it by returning POLLERR if the memory allocation failed. This bug was found by syzkaller using fault injection. Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 457b9a6f09f0 ("Staging: android: add binder driver") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-2/+2
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01Merge tag 'char-misc-4.16-rc1' of ↵Linus Torvalds3-71/+158
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big pull request for char/misc drivers for 4.16-rc1. There's a lot of stuff in here. Three new driver subsystems were added for various types of hardware busses: - siox - slimbus - soundwire as well as a new vboxguest subsystem for the VirtualBox hypervisor drivers. There's also big updates from the FPGA subsystem, lots of Android binder fixes, the usual handful of hyper-v updates, and lots of other smaller driver updates. All of these have been in linux-next for a long time, with no reported issues" * tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits) char: lp: use true or false for boolean values android: binder: use VM_ALLOC to get vm area android: binder: Use true and false for boolean values lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN EISA: Delete error message for a failed memory allocation in eisa_probe() EISA: Whitespace cleanup misc: remove AVR32 dependencies virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES soundwire: Fix a signedness bug uio_hv_generic: fix new type mismatch warnings uio_hv_generic: fix type mismatch warnings auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE uio_hv_generic: add rescind support uio_hv_generic: check that host supports monitor page uio_hv_generic: create send and receive buffers uio: document uio_hv_generic regions doc: fix documentation about uio_hv_generic vmbus: add monitor_id and subchannel_id to sysfs per channel vmbus: fix ABI documentation uio_hv_generic: use ISR callback method ...
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-25android: binder: use VM_ALLOC to get vm areaGanesh Mahendran1-1/+1
VM_IOREMAP is used to access hardware through a mechanism called I/O mapped memory. Android binder is a IPC machanism which will not access I/O memory. And VM_IOREMAP has alignment requiement which may not needed in binder. __get_vm_area_node() { ... if (flags & VM_IOREMAP) align = 1ul << clamp_t(int, fls_long(size), PAGE_SHIFT, IOREMAP_MAX_ORDER); ... } This patch will save some kernel vm area, especially for 32bit os. In 32bit OS, kernel vm area is only 240MB. We may got below error when launching a app: <3>[ 4482.440053] binder_alloc: binder_alloc_mmap_handler: 15728 8ce67000-8cf65000 get_vm_area failed -12 <3>[ 4483.218817] binder_alloc: binder_alloc_mmap_handler: 15745 8ce67000-8cf65000 get_vm_area failed -12 Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Martijn Coenen <maco@android.com> Acked-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> ---- V3: update comments V2: update comments Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-25android: binder: Use true and false for boolean valuesGustavo A. R. Silva1-3/+3
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: Todd Kjos <tkjos@android.com> Cc: Martijn Coenen <maco@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09android: binder: Use octal permissionsHarsh Shandilya1-8/+8
checkpatch warns against the use of symbolic permissions, this patch migrates all symbolic permissions in the binder driver to octal permissions. Test: debugfs nodes created by binder have the same unix permissions prior to and after this patch was applied. Signed-off-by: Harsh Shandilya <harsh@prjkt.io> Cc: "Arve Hjønnevåg" <arve@android.com> Cc: Todd Kjos <tkjos@android.com> Cc: Martijn Coenen <maco@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09ANDROID: binder: Remove obsolete proc waitqueue.Martijn Coenen1-3/+0
It was no longer being used. Signed-off-by: Martijn Coenen <maco@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09ANDROID: binder: remove waitqueue when thread exits.Martijn Coenen1-0/+12
binder_poll() passes the thread->wait waitqueue that can be slept on for work. When a thread that uses epoll explicitly exits using BINDER_THREAD_EXIT, the waitqueue is freed, but it is never removed from the corresponding epoll data structure. When the process subsequently exits, the epoll cleanup code tries to access the waitlist, which results in a use-after-free. Prevent this by using POLLFREE when the thread exits. Signed-off-by: Martijn Coenen <maco@android.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: stable <stable@vger.kernel.org> # 4.14 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09android: binder: Prefer __func__ to using hardcoded function nameElad Wexler1-2/+2
Coding style fixup Signed-off-by: Elad Wexler <elad.wexler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02Merge 4.15-rc6 into char-misc-nextGreg Kroah-Hartman1-13/+31
We want the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19ANDROID: binder: make binder_alloc_new_buf_locked static and indent its ↵Xiongwei Song1-5/+6
arguments The function binder_alloc_new_buf_locked() is only used in this file, so make it static. Also clean up sparse warning: drivers/android/binder_alloc.c:330:23: warning: no previous prototype for ‘binder_alloc_new_buf_locked’ [-Wmissing-prototypes] In addition, the line of the function name exceeds 80 characters when add static for this function, hence indent its arguments anew. Signed-off-by: Xiongwei Song <sxwjean@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-18android: binder: Check for errors in binder_alloc_shrinker_init().Tetsuo Handa3-5/+13
Both list_lru_init() and register_shrinker() might return an error. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Sherry Yang <sherryy@android.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-18binder: fix proc->files use-after-freeTodd Kjos1-13/+31
proc->files cleanup is initiated by binder_vma_close. Therefore a reference on the binder_proc is not enough to prevent the files_struct from being released while the binder_proc still has a reference. This can lead to an attempt to dereference the stale pointer obtained from proc->files prior to proc->files cleanup. This has been seen once in task_get_unused_fd_flags() when __alloc_fd() is called with a stale "files". The fix is to protect proc->files with a mutex to prevent cleanup while in use. Signed-off-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> # 4.14 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-11Merge 4.15-rc3 into char-misc-nextGreg Kroah-Hartman1-9/+31
We want the fixes and changes in here for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28ANDROID: binder: fix transaction leak.Martijn Coenen1-9/+31
If a call to put_user() fails, we failed to properly free a transaction and send a failed reply (if necessary). Signed-off-by: Martijn Coenen <maco@android.com> Cc: stable <stable@vger.kernel.org> # 4.14 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28ANDROID: binder: Add thread->process_todo flag.Martijn Coenen1-44/+107
This flag determines whether the thread should currently process the work in the thread->todo worklist. The prime usecase for this is improving the performance of synchronous transactions: all synchronous transactions post a BR_TRANSACTION_COMPLETE to the calling thread, but there's no reason to return that command to userspace right away - userspace anyway needs to wait for the reply. Likewise, a synchronous transaction that contains a binder object can cause a BC_ACQUIRE/BC_INCREFS to be returned to userspace; since the caller must anyway hold a strong/weak ref for the duration of the call, postponing these commands until the reply comes in is not a problem. Note that this flag is not used to determine whether a thread can handle process work; a thread should never pick up process work when thread work is still pending. Before patch: ------------------------------------------------------------------ Benchmark Time CPU Iterations ------------------------------------------------------------------ BM_sendVec_binderize/4 45959 ns 20288 ns 34351 BM_sendVec_binderize/8 45603 ns 20080 ns 34909 BM_sendVec_binderize/16 45528 ns 20113 ns 34863 BM_sendVec_binderize/32 45551 ns 20122 ns 34881 BM_sendVec_binderize/64 45701 ns 20183 ns 34864 BM_sendVec_binderize/128 45824 ns 20250 ns 34576 BM_sendVec_binderize/256 45695 ns 20171 ns 34759 BM_sendVec_binderize/512 45743 ns 20211 ns 34489 BM_sendVec_binderize/1024 46169 ns 20430 ns 34081 After patch: ------------------------------------------------------------------ Benchmark Time CPU Iterations ------------------------------------------------------------------ BM_sendVec_binderize/4 42939 ns 17262 ns 40653 BM_sendVec_binderize/8 42823 ns 17243 ns 40671 BM_sendVec_binderize/16 42898 ns 17243 ns 40594 BM_sendVec_binderize/32 42838 ns 17267 ns 40527 BM_sendVec_binderize/64 42854 ns 17249 ns 40379 BM_sendVec_binderize/128 42881 ns 17288 ns 40427 BM_sendVec_binderize/256 42917 ns 17297 ns 40429 BM_sendVec_binderize/512 43184 ns 17395 ns 40411 BM_sendVec_binderize/1024 43119 ns 17357 ns 40432 Signed-off-by: Martijn Coenen <maco@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28ANDROID: binder: show high watermark of alloc->pages.Martijn Coenen2-0/+6
Show the high watermark of the index into the alloc->pages array, to facilitate sizing the buffer on a per-process basis. Signed-off-by: Martijn Coenen <maco@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-16Merge tag 'char-misc-4.15-rc1' of ↵Linus Torvalds2-11/+9
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ...
2017-11-15Merge tag 'modules-for-v4.15' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31treewide: Fix function prototypes for module_param_call()Kees Cook1-1/+1
Several function prototypes for the set/get functions defined by module_param_call() have a slightly wrong argument types. This fixes those in an effort to clean up the calls when running under type-enforced compiler instrumentation for CFI. This is the result of running the following semantic patch: @match_module_param_call_function@ declarer name module_param_call; identifier _name, _set_func, _get_func; expression _arg, _mode; @@ module_param_call(_name, _set_func, _get_func, _arg, _mode); @fix_set_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._set_func; identifier _val, _param; type _val_type, _param_type; @@ int _set_func( -_val_type _val +const char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } @fix_get_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._get_func; identifier _val, _param; type _val_type, _param_type; @@ int _get_func( -_val_type _val +char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } Two additional by-hand changes are included for places where the above Coccinelle script didn't notice them: drivers/platform/x86/thinkpad_acpi.c fs/lockd/svc.c Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-10-23Merge 4.14-rc6 into char-misc-nextGreg Kroah-Hartman3-25/+11
We want the driver fixes in here and this resolves a merge issue with the binder driver. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21android: binder: Fix null ptr dereference in debug msgSherry Yang1-1/+1
Don't access next->data in kernel debug message when the next buffer is null. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21android: binder: Don't get mm from taskSherry Yang2-14/+9
Use binder_alloc struct's mm_struct rather than getting a reference to the mm struct through get_task_mm to avoid a potential deadlock between lru lock, task lock and dentry lock, since a thread can be holding the task lock and the dentry lock while trying to acquire the lru lock. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20binder: pr_err() strings should end with newlinesArvind Yadav1-1/+1
pr_err() messages should terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-01 12:26:18 +0000