summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx53-smd.dts
AgeCommit message (Collapse)AuthorFilesLines
2019-05-23ARM: dts: imx53-smd: Add OV5642 video capture supportSteve Longerbeam1-0/+73
Add video capture support from the OV5642 to IPU CSI0 on the i.MX53 SMD. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> [fabio: remove unnecessary 'regulator-always-on' from camera regulators] Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx53: Fix memory node duplicationFabio Estevam1-0/+1
Boards based on imx53 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx53.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-15ARM: dts: imx: Switch NXP boards to SPDX identifierFabio Estevam1-11/+4
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-14ARM: dts: imx53-smd: Do not hardcode input codesFabio Estevam1-2/+3
Instead of hardcoding the input codes we can use the symbol name for better readability. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx: Add memory node unit nameMarco Franchi1-1/+1
Fix the following warnings from dtc by adding the unit name to memory nodes: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Converted using the following command: perl -p0777i -e 's/memory \{\n\t\treg = \<0x+([0-9a-f])/memory\@$1$\0000000 \{\n\t\treg = <0x$1/m' `find ./arch/arm/boot/dts -name "imx*"` The files below were manually fixed: -imx1-ads.dts -imx1-apf9328.dts -imx6q-pistachio.dts Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-2/+2
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-05ARM: dts: imx: Fix Ethernet PHY reset polarityFabio Estevam1-1/+1
The FEC driver ignores the GPIO polarity from 'phy-reset-gpios' and considers that the Ethernet PHY is active low, unless the property 'phy-reset-active-high' is present. Fix the device tree description by explicitly passing the 'GPIO_ACTIVE_LOW' flag to the 'phy-reset-gpios' property. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-02ARM: dts: imx: remove obsoleted property fsl,spi-num-chipselectsVladimir Zapolskiy1-1/+0
Since commit b36581df7e78 ("spi: imx: Using existing properties for chipselects") the device tree property 'fsl,spi-num-chipselects' is unused and it is already marked as obsolete in device tree binding documentation. Remove the property from the existing DTS files to avoid its reoccurence on copying. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11ARM: dts: imx: Use generic uart-has-rtscts DT propertyGeert Uytterhoeven1-1/+1
As of commit 1006ed7e1b258dac ("serial: imx: Use generic uart-has-rtscts DT property"), the Freescale IMX UART driver recognizes the generic "uart-has-rtscts" DT property, deprecating the vendor-specific "fsl,uart-has-rtscts" DT property. Hence replace the latter by the former in all DTS files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-10-19ARM: dts: imx: add "jedec,spi-nor" flash compatible bindingRafał Miłecki1-1/+1
Starting with commit 8947e396a829 ("Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor" binding indicating support for JEDEC identification. Use it for all flashes that are supposed to support READ ID op according to the datasheets. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-24dts: imx53: fix sd card gpio polarity specified in device treeDong Aisheng1-2/+2
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios should be changed to GPIO_ACTIVE_HIGH. Otherwise, the SD may not work properly due to wrong polarity inversion specified in DT after switch to common parsing function mmc_of_parse(). Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-08-29devicetree: Dialog Semiconductor consolidate existing vendor prefixes to ↵Steve Twiss1-1/+1
standardise on 'dlg' This patch series updates the device tree vendor prefix for Dialog Semiconductor. Various methods are currently used throughout the kernel: 'diasemi', 'dialog' and 'dlg'. Others have also been suggested. This patch set aims to consolidate the usage of the vendor prefix to use a common standard. The prefix 'dlg' is used. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-09ARM: dts: imx53: make pinctrl nodes board specificShawn Guo1-11/+108
Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09pinctrl: imx: move hard-coding data into device treeShawn Guo1-7/+7
Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09ARM: imx: use #include for all device treesShawn Guo1-1/+1
Replace /include/ (dtc) with #include (C pre-processor) for all imx DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as pinctrl settings. Use of those features will increase the readability of the device tree files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-10ARM: dts: imx: use nodes label in board dtsShawn Guo1-151/+143
Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-11ARM: dts: imx53-smd: add pinctrl settingsShawn Guo1-2/+36
Add pinctrl settings for the exsiting devices in imx53-smd.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-24ARM: dts: imx: Move SDMA firmware to SoC dtsi fileFabio Estevam1-4/+0
Instead of adding sdma-ram-script-name into each board dts file, move it to the SoC dtsi file instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-24ARM: dts: imx: Always enable the watchdogFabio Estevam1-4/+0
Instead of enabling the watchdog in each individual dts file, select in the SoC dtsi file instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-15Merge branch 'drivers/mmc' into next/dt2Arnd Bergmann1-2/+2
Changes in the dt2 branch move stuff around that gets changed in the drivers/mmc branch. I chose a non-obvious resolution by adding the new bus-width property into all the tegra sdhci device nodes. Conflicts: arch/arm/boot/dts/tegra-cardhu.dts arch/arm/boot/dts/tegra-harmony.dts arch/arm/boot/dts/tegra-ventana.dts Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-15mmc: dt: Consolidate DT bindingsArnd Bergmann1-2/+2
This patch unifies the current DT MMC bindings documentation and code, adds generic MMC DT bindings documentation, and updates .dts files for consistency. [cjb: typo fixes, addition of max-frequency property] Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11ARM: imx: rename uart and fec device tree nodesShawn Guo1-4/+4
It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-11ARM: dts: imx: Remove bootargs fieldFabio Estevam1-4/+0
Remove bootargs field as this information is retrieved from the bootloader. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14dts/imx: rename uart labels to consistent with hw specRichard Zhao1-3/+3
UART1/UART2/... is more readable than UART0/UART1/... . Remove redundant UART comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14dts/imx: rename gpio labels to consistent with hw specRichard Zhao1-7/+6
GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... . Remove redundant gpio comments. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-18arm/mx5: add device tree support for imx53 boardsShawn Guo1-0/+169
It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>