summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-15drm/amd/powerplay: correct the supported pcie GenSpeed and LaneCountEvan Quan2-20/+14
The LCLK dpm table setup should be performed in .update_pcie_parameters(). Otherwise, the updated GenSpeed and LaneCount information will be lost. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: drop unnecessary wrapper around pcie parameters settingEvan Quan8-51/+31
This can also help to maintain clear code layer. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: drop unused APIs and parametersEvan Quan5-30/+10
Leftover of previous performance level setting cleanups. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: drop smu_v12_0.c unnecessary wrapper V2Evan Quan4-168/+177
By moving the implemention to renoir_ppt.c considering it's really ASIC specific. V2: fix compile warnings below drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.h:40:25: warning: array subscript is above array bounds [-Warray-bounds] freq = table->FClocks[dpm_level].Freq; \ drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.c:195:2: note: in expansion of macro ‘GET_DPM_CUR_FREQ’ GET_DPM_CUR_FREQ(clk_table, clk_type, dpm_level, *freq); ^~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.h:46:25: warning: array subscript is above array bounds [-Warray-bounds] freq = table->FClocks[dpm_level].Freq; \ drivers/gpu/drm/amd/amdgpu/../powerplay/renoir_ppt.c:195:2: note: in expansion of macro ‘GET_DPM_CUR_FREQ’ GET_DPM_CUR_FREQ(clk_table, clk_type, dpm_level, *freq); Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: drop unnecessary wrappersEvan Quan1-12/+10
By calling the target APIs directly. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: apply gfxoff disablement/enablement for all SMU11 ASICsEvan Quan1-4/+2
Before and after setting gfx clock soft max/min frequency. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: drop Sienna Cichlid specific set_soft_freq_limited_rangeEvan Quan3-23/+18
Use the common smu_v11_0_set_soft_freq_limited_range. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: drop unnecessary Sienna Cichlid specific APIsEvan Quan1-177/+1
As a common performance level setting API is used. Then these ASIC specific APIs are not needed any more. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: drop unnecessary Navi1x specific APIsEvan Quan1-247/+1
As a common performance level setting API is used. Then these ASIC specific APIs are not needed any more. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: drop unnecessary Arcturus specific APIsEvan Quan1-170/+0
As a common performance level setting API is used. Then these ASIC specific APIs are not needed any more. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: update the common API for performance level settingEvan Quan1-14/+77
So that it can be more widely shared around SMU v11 ASICs. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: update UMD pstate clock settingsEvan Quan4-46/+141
Preparing for coming code sharing around performance level setting. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: add new UMD pstate data structureEvan Quan1-0/+15
This is used to cache the clock frequencies for all UMD pstates. So that we do not need to calculate from scratch on every UMD pstate switch. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: update Sienna Cichlid default dpm table setupEvan Quan1-23/+211
Cache all clocks levels for every dpm table. They are needed by other APIs. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: update Navi10 default dpm table setupEvan Quan1-24/+158
Cache all clocks levels for every dpm table. They are needed by other APIs. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: update Arcturus default dpm table settingEvan Quan1-178/+119
Preparing for coming code sharing around performance level setting. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: implement a common set dpm table API for smu V11Evan Quan2-0/+42
Maximum the code sharing around smu V11. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: add more members for dpm tableEvan Quan1-2/+13
These members can help to cache the clock frequencies for all dpm levels. Then simplifying the code for dpm level switching is possible. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amdgpu: add module parameter choose reset modeWenhui Sheng7-0/+47
Default value is auto, doesn't change original reset method logic. v2: change to use parameter reset_method v3: add warn msg if specified mode isn't supported Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amdgpu: enable mode1 resetWenhui Sheng3-9/+14
For sienna cichlid, add mode1 reset path for sGPU. v2: hiding MP0/MP1 mode1 reset under AMD_RESET_METHOD_MODE1 v3: split emergency restart logic to a new patch Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amdgpu: RAS emergency restart logic refineWenhui Sheng3-11/+24
If we are in RAS triggered situation and BACO isn't support, emergency restart is needed, and this code is only needed for some specific cases(vega20 with given smu fw version). After we add smu mode1 reset for sienna cichlid, we need to share AMD_RESET_METHOD_MODE1 with psp mode1 reset, so in amdgpu_device_gpu_recover, we need differentiate which mode1 reset we are using, then decide if it's a full reset and then decide if emergency restart is needed, the logic will become much more complex. After discussion with Hawking, move emergency restart logic to an independent function. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amd/powerplay: add SMU mode1 resetWenhui Sheng8-2/+104
From PM FW 58.26.0 for sienna cichlid, SMU mode1 reset is support, driver sends PPSMC_MSG_Mode1Reset message to PM FW could trigger this reset. v2: add mode1 reset dpm interface v3: change maro name Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-15drm/amdkfd: fix kernel-doc and cleanupRajneesh Bhardwaj1-36/+25
- fix some styling issues - fixes for kernel-doc type Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: remove an unnecessary NULL checkDan Carpenter1-1/+1
The "stream" pointer can't be NULL and it's dereferenced on the line before so the check doesn't make sense. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amdgpu/sdma5: fix wptr overwritten in ->get_wptr()Xiaojie Yuan2-36/+16
"u64 *wptr" points to the the wptr value in write back buffer and "*wptr = (*wptr) >> 2;" results in the value being overwritten each time when ->get_wptr() is called. umr uses /sys/kernel/debug/dri/0/amdgpu_ring_sdma0 to get rptr/wptr and decode ring content and it is affected by this issue. fix and simplify the logic similar as sdma_v4_0_ring_get_wptr(). v2: fix for sdma5.2 as well Suggested-by: Le Ma <le.ma@amd.com> Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amdgpu: use ARRAY_SIZE() to add amdgpu debugfs filesXiaojie Yuan3-4/+8
to easily add new debugfs file w/o changing the hardcoded list count. Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amdgpu/powerplay: Modify SMC message name for setting power profile modechen gong1-1/+1
I consulted Cai Land(Chuntian.Cai@amd.com), he told me corresponding smc message name to fSMC_MSG_SetWorkloadMask() is "PPSMC_MSG_ActiveProcessNotify" in firmware code of Renoir. Strange though it may seem, but it's a fact. Signed-off-by: chen gong <curry.gong@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: Allow for vblank enabled with no active planesNicholas Kazlauskas2-91/+78
[Why] CRC capture doesn't work when the active plane count is 0 since we currently tie both vblank and pageflip interrupts to active_plane_count greater than 0. [How] The frontend is what generates the vblank interrupts while the backend is what generates pageflip interrupts. Both have a requirement for the CRTC to be active, so control the overall interrupt state based on that instead. Pageflip interrupts need to be enabled based on active plane count, but we actually rely on power gating to take care of disabling the interrupt for us on pipes that can be power gated. For pipes that can't be power gated it's still fine to leave it enabled since the interrupt only triggers after the address has been written to that particular pipe - which we won't be doing without an active plane. The issue we had before with this setup was that we couldn't force the state back on. We were essentially manipulating the refcount to enable or disable as needed in a two pass approach. However, there is a function that solves this problem more elegantly: amdgpu_irq_update() will unconditionally call the set based on what it thinks the current enablement state is. This leaves two future TODO items for our IRQ handling: - Disabling IRQs in commit tail instead of atomic commit - Mapping the pageflip interrupt to VUPDATE or something that's tied to the frontend instead of the backend since the mapping to CRTC is not correct Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: Add missing DCN30 registers and fields for OTG_CRC_CNTL2Nicholas Kazlauskas1-0/+9
[Why] When enabling the debugfs for CRC capture we hit assertions caused by register address and field masks and shifts missing. [How] We want these registers programmed, so add in the SRI/SF entries for this register. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: handle failed allocation during stream constructionJosip Pavic1-3/+16
[Why] Failing to allocate a transfer function during stream construction leads to a null pointer dereference [How] Handle the failed allocation by failing the stream construction Cc: stable@vger.kernel.org Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: Reuse parsing code of debugfs write bufferMikita Lipski1-131/+128
[why] Move code for parsing debugfs input into an array of int parameters by specifying the max number of expected parameters Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: 3.2.94Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: [FW Promotion] Release 0.0.24Anthony Koo1-2/+2
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: fix dcn3 p_state_change_support validation (v2)Dmytro Laktyushkin2-7/+41
Our validation is a known mess with actual validation mixed with topology configuration. This change makes sure topolgical validation is completed before any topology changes are made so we do not run into issues where we merge and split a pipe over the course of a single call. v2: Squash in compilation fix Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: p-state warning occurs while changing resolution from 120hz ↵hersen wu1-2/+34
to 60hz [Why] new calculated dispclk, dppclk are stored in context->bw_ctx.bw.dcn.clk.dispclk_khz, dppclk_khz. Current dispclk, dppclk are from dc->clk_mgr->clks.dispclk_khz. dcn_validate_bandwidth compute new dispclk, dppclk. dispclk will put in use after optimize_bandwidth when ramp_up_dispclk_with_dpp is called. There are two places for dppclk be put in use. One location is the same as the location as dispclk. Another is within update_dchubp_dpp which happens between pre_bandwidth and optimize_bandwidth. dppclk updated within update_dchubp_dpp will cause new clock values of dispclk and dppclk not be in use at the same time. when clocks are decreased, this may cause dppclk is lower than current configuration and let pipe stuck. for example, eDP + external dp, change resolution of DP from 1920x1080x144hz to 1280x960x60hz. before change: dispclk = 337889 dppclk = 337889 change mode, dcn_validate_bandwidth calculate dispclk = 143122 dppclk = 143122 update_dchubp_dpp be executed before dispclk be updated, dispclk = 337889, but dppclk use new value dispclk /2 = 168944. this will cause pipe pstate warning issue. [How] between pre_bandwidth and optimize_bandwidth, while dispclk is going to be decreased, keep dppclk = dispclk Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: OLED panel backlight adjust not work with external display ↵hersen wu1-0/+5
connected [Why] amdgpu_dm->backlight_caps is for single eDP only. the caps are upddated for very connector. Real eDP caps will be overwritten by other external display. For OLED panel, caps->aux_support is set to 1 for OLED pnael. after external connected, caps+.aux_support is set to 0. This causes OLED backlight adjustment not work. [How] within update_conector_ext_caps, backlight caps will be updated only for eDP connector. Cc: stable@vger.kernel.org Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: reduce sr_xxx_time by 3 us when ppt disableChiawen Huang4-3/+55
[Why] when ppt disabled, the watermark doesn't get fine tune causing underflow. [How] It is a temporary solution to reduce sr_xxx_time by 3 us when ppt disable. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: Power down hardware if set mode is not called before timeoutSung Lee8-32/+52
[WHY] In headless systems, if set mode is not called, hardware will not be powered down on boot, causing HW/SW discrepancies. Powering down hardware on boot will ensure SW state is accurate. [HOW] Set a timer callback on boot for 10 seconds. If set mode is not called within that time, power down hardware. Otherwise, do not power down. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: update dml varDmytro Laktyushkin2-6/+4
Update *DynamicMetadata variables for providing more flexibility. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amdgpu/powerplay: Target power profile mode should be the second ↵chen gong1-3/+3
parameter of renoir_set_power_profile_mode A small mistake Signed-off-by: chen gong <curry.gong@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu/display: create fake mst encoders ahead of time (v4)Alex Deucher4-28/+48
Prevents a warning in the MST create connector case. v2: create global fake encoders rather per connector fake encoders to avoid running out of encoder indices. v3: use the actual number of crtcs on the asic rather than the max to conserve encoders. v4: v3 plus missing hunk I forgot to git add. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1108 Fixes: c6385e503aeaf9 ("drm/amdgpu: drop legacy drm load and unload callbacks") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: fix spelling mistake "Falied" -> "Failed"Colin Ian King1-1/+1
There is a spelling mistake in a DRM_ERROR error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: fix preemption unit testJack Xiao1-5/+15
Remove signaled jobs from job list and ensure the job was indeed preempted. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu/gfx10: fix race condition for kiqJack Xiao1-1/+8
During preemption test for gfx10, it uses kiq to trigger gfx preemption, which would result in race condition with flushing TLB for kiq. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amdgpu: minor cleanup of phase1 suspend codeNirmoy Das1-10/+13
Cleanup of phase1 suspend code to reduce unnecessary indentation. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: put dpm frequency setting common code in smu_v11_0.cEvan Quan6-96/+129
As designed the common code shared among all smu v11 ASCIs go to smu_v11_0.c. This helps to maintain clear code layers. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: revise calling chain on retrieving frequency rangeEvan Quan9-59/+87
This helps to maintain clear code layers and drop unnecessary parameter. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: revise calling chain on setting soft limitEvan Quan6-41/+49
This helps to maintain clear code layers and drop unnecessary parameter. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: put setting hard limit common code in smu_v11_0.cEvan Quan6-49/+53
As designed the common code shared among all smu v11 ASCIs go to smu_v11_0.c. This helps to maintain clear code layers. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/powerplay: drop unused code and wrapper around clock retrievingEvan Quan10-114/+22
Clean code by dropping unnecessary ones. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>