diff options
Diffstat (limited to 'drivers/usb')
62 files changed, 1580 insertions, 653 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 987fc5ba6321..70e6c956c23c 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -205,8 +205,4 @@ config USB_ULPI_BUS To compile this driver as a module, choose M here: the module will be called ulpi. -config USB_ROLE_SWITCH - tristate - select USB_COMMON - endif # USB_SUPPORT diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 09b37c0d075d..e81de9ca8729 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -14,6 +14,7 @@ #include <linux/usb/chipidea.h> #include <linux/usb/of.h> #include <linux/clk.h> +#include <linux/pinctrl/consumer.h> #include "ci.h" #include "ci_hdrc_imx.h" @@ -85,6 +86,9 @@ struct ci_hdrc_imx_data { bool supports_runtime_pm; bool override_phy_control; bool in_lpm; + struct pinctrl *pinctrl; + struct pinctrl_state *pinctrl_hsic_active; + struct regulator *hsic_pad_regulator; /* SoC before i.mx6 (except imx23/imx28) needs three clks */ bool need_three_clks; struct clk *clk_ipg; @@ -132,11 +136,21 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev) data->dev = &misc_pdev->dev; - if (of_find_property(np, "disable-over-current", NULL)) + /* + * Check the various over current related properties. If over current + * detection is disabled we're not interested in the polarity. + */ + if (of_find_property(np, "disable-over-current", NULL)) { data->disable_oc = 1; - - if (of_find_property(np, "over-current-active-high", NULL)) - data->oc_polarity = 1; + } else if (of_find_property(np, "over-current-active-high", NULL)) { + data->oc_pol_active_low = 0; + data->oc_pol_configured = 1; + } else if (of_find_property(np, "over-current-active-low", NULL)) { + data->oc_pol_active_low = 1; + data->oc_pol_configured = 1; + } else { + dev_warn(dev, "No over current polarity defined\n"); + } if (of_find_property(np, "external-vbus-divider", NULL)) data->evdo = 1; @@ -245,19 +259,49 @@ static void imx_disable_unprepare_clks(struct device *dev) } } +static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned int event) +{ + struct device *dev = ci->dev->parent; + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret = 0; + + switch (event) { + case CI_HDRC_IMX_HSIC_ACTIVE_EVENT: + ret = pinctrl_select_state(data->pinctrl, + data->pinctrl_hsic_active); + if (ret) + dev_err(dev, "hsic_active select failed, err=%d\n", + ret); + break; + case CI_HDRC_IMX_HSIC_SUSPEND_EVENT: + ret = imx_usbmisc_hsic_set_connect(data->usbmisc_data); + if (ret) + dev_err(dev, + "hsic_set_connect failed, err=%d\n", ret); + break; + default: + break; + } + + return ret; +} + static int ci_hdrc_imx_probe(struct platform_device *pdev) { struct ci_hdrc_imx_data *data; struct ci_hdrc_platform_data pdata = { .name = dev_name(&pdev->dev), .capoffset = DEF_CAPOFFSET, + .notify_event = ci_hdrc_imx_notify_event, }; int ret; const struct of_device_id *of_id; const struct ci_hdrc_imx_platform_flag *imx_platform_flag; struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct pinctrl_state *pinctrl_hsic_idle; - of_id = of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev); + of_id = of_match_device(ci_hdrc_imx_dt_ids, dev); if (!of_id) return -ENODEV; @@ -268,19 +312,73 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) return -ENOMEM; platform_set_drvdata(pdev, data); - data->usbmisc_data = usbmisc_get_init_data(&pdev->dev); + data->usbmisc_data = usbmisc_get_init_data(dev); if (IS_ERR(data->usbmisc_data)) return PTR_ERR(data->usbmisc_data); - ret = imx_get_clks(&pdev->dev); + if (of_usb_get_phy_mode(dev->of_node) == USBPHY_INTERFACE_MODE_HSIC) { + pdata.flags |= CI_HDRC_IMX_IS_HSIC; + data->usbmisc_data->hsic = 1; + data->pinctrl = devm_pinctrl_get(dev); + if (IS_ERR(data->pinctrl)) { + dev_err(dev, "pinctrl get failed, err=%ld\n", + PTR_ERR(data->pinctrl)); + return PTR_ERR(data->pinctrl); + } + + pinctrl_hsic_idle = pinctrl_lookup_state(data->pinctrl, "idle"); + if (IS_ERR(pinctrl_hsic_idle)) { + dev_err(dev, + "pinctrl_hsic_idle lookup failed, err=%ld\n", + PTR_ERR(pinctrl_hsic_idle)); + return PTR_ERR(pinctrl_hsic_idle); + } + + ret = pinctrl_select_state(data->pinctrl, pinctrl_hsic_idle); + if (ret) { + dev_err(dev, "hsic_idle select failed, err=%d\n", ret); + return ret; + } + + data->pinctrl_hsic_active = pinctrl_lookup_state(data->pinctrl, + "active"); + if (IS_ERR(data->pinctrl_hsic_active)) { + dev_err(dev, + "pinctrl_hsic_active lookup failed, err=%ld\n", + PTR_ERR(data->pinctrl_hsic_active)); + return PTR_ERR(data->pinctrl_hsic_active); + } + + data->hsic_pad_regulator = devm_regulator_get(dev, "hsic"); + if (PTR_ERR(data->hsic_pad_regulator) == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else if (PTR_ERR(data->hsic_pad_regulator) == -ENODEV) { + /* no pad regualator is needed */ + data->hsic_pad_regulator = NULL; + } else if (IS_ERR(data->hsic_pad_regulator)) { + dev_err(dev, "Get HSIC pad regulator error: %ld\n", + PTR_ERR(data->hsic_pad_regulator)); + return PTR_ERR(data->hsic_pad_regulator); + } + + if (data->hsic_pad_regulator) { + ret = regulator_enable(data->hsic_pad_regulator); + if (ret) { + dev_err(dev, + "Failed to enable HSIC pad regulator\n"); + return ret; + } + } + } + ret = imx_get_clks(dev); if (ret) - return ret; + goto disable_hsic_regulator; - ret = imx_prepare_enable_clks(&pdev->dev); + ret = imx_prepare_enable_clks(dev); if (ret) - return ret; + goto disable_hsic_regulator; - data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0); + data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0); if (IS_ERR(data->phy)) { ret = PTR_ERR(data->phy); /* Return -EINVAL if no usbphy is available */ @@ -305,40 +403,43 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) ret = imx_usbmisc_init(data->usbmisc_data); if (ret) { - dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n", ret); + dev_err(dev, "usbmisc init failed, ret=%d\n", ret); goto err_clk; } - data->ci_pdev = ci_hdrc_add_device(&pdev->dev, + data->ci_pdev = ci_hdrc_add_device(dev, pdev->resource, pdev->num_resources, &pdata); if (IS_ERR(data->ci_pdev)) { ret = PTR_ERR(data->ci_pdev); if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "ci_hdrc_add_device failed, err=%d\n", ret); + dev_err(dev, "ci_hdrc_add_device failed, err=%d\n", + ret); goto err_clk; } ret = imx_usbmisc_init_post(data->usbmisc_data); if (ret) { - dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n", ret); + dev_err(dev, "usbmisc post failed, ret=%d\n", ret); goto disable_device; } if (data->supports_runtime_pm) { - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); } - device_set_wakeup_capable(&pdev->dev, true); + device_set_wakeup_capable(dev, true); return 0; disable_device: ci_hdrc_remove_device(data->ci_pdev); err_clk: - imx_disable_unprepare_clks(&pdev->dev); + imx_disable_unprepare_clks(dev); +disable_hsic_regulator: + if (data->hsic_pad_regulator) + ret = regulator_disable(data->hsic_pad_regulator); return ret; } @@ -355,6 +456,8 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev) if (data->override_phy_control) usb_phy_shutdown(data->phy); imx_disable_unprepare_clks(&pdev->dev); + if (data->hsic_pad_regulator) + regulator_disable(data->hsic_pad_regulator); return 0; } @@ -367,9 +470,16 @@ static void ci_hdrc_imx_shutdown(struct platform_device *pdev) static int __maybe_unused imx_controller_suspend(struct device *dev) { struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret = 0; dev_dbg(dev, "at %s\n", __func__); + ret = imx_usbmisc_hsic_set_clk(data->usbmisc_data, false); + if (ret) { + dev_err(dev, "usbmisc hsic_set_clk failed, ret=%d\n", ret); + return ret; + } + imx_disable_unprepare_clks(dev); data->in_lpm = true; @@ -400,8 +510,16 @@ static int __maybe_unused imx_controller_resume(struct device *dev) goto clk_disable; } + ret = imx_usbmisc_hsic_set_clk(data->usbmisc_data, true); + if (ret) { + dev_err(dev, "usbmisc hsic_set_clk failed, ret=%d\n", ret); + goto hsic_set_clk_fail; + } + return 0; +hsic_set_clk_fail: + imx_usbmisc_set_wakeup(data->usbmisc_data, true); clk_disable: imx_disable_unprepare_clks(dev); return ret; diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h index 204275f47573..7cc53e2ce564 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.h +++ b/drivers/usb/chipidea/ci_hdrc_imx.h @@ -11,13 +11,22 @@ struct imx_usbmisc_data { int index; unsigned int disable_oc:1; /* over current detect disabled */ - unsigned int oc_polarity:1; /* over current polarity if oc enabled */ + + /* true if over-current polarity is active low */ + unsigned int oc_pol_active_low:1; + + /* true if dt specifies polarity */ + unsigned int oc_pol_configured:1; + unsigned int evdo:1; /* set external vbus divider option */ unsigned int ulpi:1; /* connected to an ULPI phy */ + unsigned int hsic:1; /* HSIC controlller */ }; -int imx_usbmisc_init(struct imx_usbmisc_data *); -int imx_usbmisc_init_post(struct imx_usbmisc_data *); -int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *, bool); +int imx_usbmisc_init(struct imx_usbmisc_data *data); +int imx_usbmisc_init_post(struct imx_usbmisc_data *data); +int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled); +int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data); +int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on); #endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */ diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index d858a82c4f44..b45ceb91c735 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -170,6 +170,11 @@ static int host_start(struct ci_hdrc *ci) otg->host = &hcd->self; hcd->self.otg_port = 1; } + + if (ci->platdata->notify_event && + (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC)) + ci->platdata->notify_event + (ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT); } return ret; @@ -215,9 +220,85 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci) host_stop(ci); } +/* The below code is based on tegra ehci driver */ +static int ci_ehci_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 __iomem *status_reg; + u32 temp; + unsigned long flags; + int retval = 0; + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + + status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; + + spin_lock_irqsave(&ehci->lock, flags); + + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { + retval = -EPIPE; + goto done; + } + + temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E); + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + + /* + * If a transaction is in progress, there may be a delay in + * suspending the port. Poll until the port is suspended. + */ + if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, + PORT_SUSPEND, 5000)) + ehci_err(ehci, "timeout waiting for SUSPEND\n"); + + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, + CI_HDRC_IMX_HSIC_SUSPEND_EVENT); + + temp = ehci_readl(ehci, status_reg); + temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); + ehci_writel(ehci, temp, status_reg); + } + + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); + goto done; + } + + /* + * After resume has finished, it needs do some post resume + * operation for some SoCs. + */ + else if (typeReq == ClearPortFeature && + wValue == USB_PORT_FEAT_C_SUSPEND) { + /* Make sure the resume has finished, it should be finished */ + if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 25000)) + ehci_err(ehci, "timeout waiting for resume\n"); + } + + spin_unlock_irqrestore(&ehci->lock, flags); + + /* Handle the hub control events here */ + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +done: + spin_unlock_irqrestore(&ehci->lock, flags); + return retval; +} static int ci_ehci_bus_suspend(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); int port; u32 tmp; @@ -249,6 +330,16 @@ static int ci_ehci_bus_suspend(struct usb_hcd *hcd) * It needs a short delay between set RS bit and PHCD. */ usleep_range(150, 200); + /* + * Need to clear WKCN and WKOC for imx HSIC, + * otherwise, there will be wakeup event. + */ + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { + tmp = ehci_readl(ehci, reg); + tmp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); + ehci_writel(ehci, tmp, reg); + } + break; } } @@ -281,4 +372,5 @@ void ci_hdrc_host_driver_init(void) ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); orig_bus_suspend = ci_ehci_hc_driver.bus_suspend; ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend; + ci_ehci_hc_driver.hub_control = ci_ehci_hub_control; } diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index def80ff547e4..097ffbca0bd9 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -64,10 +64,22 @@ #define MX6_BM_OVER_CUR_DIS BIT(7) #define MX6_BM_OVER_CUR_POLARITY BIT(8) #define MX6_BM_WAKEUP_ENABLE BIT(10) +#define MX6_BM_UTMI_ON_CLOCK BIT(13) #define MX6_BM_ID_WAKEUP BIT(16) #define MX6_BM_VBUS_WAKEUP BIT(17) #define MX6SX_BM_DPDM_WAKEUP_EN BIT(29) #define MX6_BM_WAKEUP_INTR BIT(31) + +#define MX6_USB_HSIC_CTRL_OFFSET 0x10 +/* Send resume signal without 480Mhz PHY clock */ +#define MX6SX_BM_HSIC_AUTO_RESUME BIT(23) +/* set before portsc.suspendM = 1 */ +#define MX6_BM_HSIC_DEV_CONN BIT(21) +/* HSIC enable */ +#define MX6_BM_HSIC_EN BIT(12) +/* Force HSIC module 480M clock on, even when in Host is in suspend mode */ +#define MX6_BM_HSIC_CLK_ON BIT(11) + #define MX6_USB_OTG1_PHY_CTRL 0x18 /* For imx6dql, it is host-only controller, for later imx6, it is otg's */ #define MX6_USB_OTG2_PHY_CTRL 0x1c @@ -94,6 +106,10 @@ struct usbmisc_ops { int (*post)(struct imx_usbmisc_data *data); /* It's called when we need to enable/disable usb wakeup */ int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled); + /* It's called before setting portsc.suspendM */ + int (*hsic_set_connect)(struct imx_usbmisc_data *data); + /* It's called during suspend/resume */ + int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled); }; struct imx_usbmisc { @@ -120,6 +136,14 @@ static int usbmisc_imx25_init(struct imx_usbmisc_data *data) val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT); val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT); + + /* + * If the polarity is not configured assume active high for + * historical reasons. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + val &= ~MX25_OTG_OCPOL_BIT; + writel(val, usbmisc->base); break; case 1: @@ -129,6 +153,13 @@ static int usbmisc_imx25_init(struct imx_usbmisc_data *data) val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT); + /* + * If the polarity is not configured assume active high for + * historical reasons. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + val &= ~MX25_H1_OCPOL_BIT; + writel(val, usbmisc->base); break; @@ -340,11 +371,17 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) reg = readl(usbmisc->base + data->index * 4); if (data->disable_oc) { reg |= MX6_BM_OVER_CUR_DIS; - } else if (data->oc_polarity == 1) { - /* High active */ - reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY); } else { - reg &= ~(MX6_BM_OVER_CUR_DIS); + reg &= ~MX6_BM_OVER_CUR_DIS; + + /* + * If the polarity is not configured keep it as setup by the + * bootloader. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + reg |= MX6_BM_OVER_CUR_POLARITY; + else if (data->oc_pol_configured) + reg &= ~MX6_BM_OVER_CUR_POLARITY; } writel(reg, usbmisc->base + data->index * 4); @@ -353,6 +390,18 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base + data->index * 4); + /* For HSIC controller */ + if (data->hsic) { + reg = readl(usbmisc->base + data->index * 4); + writel(reg | MX6_BM_UTMI_ON_CLOCK, + usbmisc->base + data->index * 4); + reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + + (data->index - 2) * 4); + reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; + writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + + (data->index - 2) * 4); + } + spin_unlock_irqrestore(&usbmisc->lock, flags); usbmisc_imx6q_set_wakeup(data, false); @@ -360,6 +409,79 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) return 0; } +static int usbmisc_imx6_hsic_get_reg_offset(struct imx_usbmisc_data *data) +{ + int offset, ret = 0; + + if (data->index == 2 || data->index == 3) { + offset = (data->index - 2) * 4; + } else if (data->index == 0) { + /* + * For SoCs like i.MX7D and later, each USB controller has + * its own non-core register region. For SoCs before i.MX7D, + * the first two USB controllers are non-HSIC controllers. + */ + offset = 0; + } else { + dev_err(data->dev, "index is error for usbmisc\n"); + ret = -EINVAL; + } + + return ret ? ret : offset; +} + +static int usbmisc_imx6_hsic_set_connect(struct imx_usbmisc_data *data) +{ + unsigned long flags; + u32 val; + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + int offset; + + spin_lock_irqsave(&usbmisc->lock, flags); + offset = usbmisc_imx6_hsic_get_reg_offset(data); + if (offset < 0) { + spin_unlock_irqrestore(&usbmisc->lock, flags); + return offset; + } + + val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + if (!(val & MX6_BM_HSIC_DEV_CONN)) + writel(val | MX6_BM_HSIC_DEV_CONN, + usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return 0; +} + +static int usbmisc_imx6_hsic_set_clk(struct imx_usbmisc_data *data, bool on) +{ + unsigned long flags; + u32 val; + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + int offset; + + spin_lock_irqsave(&usbmisc->lock, flags); + offset = usbmisc_imx6_hsic_get_reg_offset(data); + if (offset < 0) { + spin_unlock_irqrestore(&usbmisc->lock, flags); + return offset; + } + + val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; + if (on) + val |= MX6_BM_HSIC_CLK_ON; + else + val &= ~MX6_BM_HSIC_CLK_ON; + + writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return 0; +} + + static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data) { void __iomem *reg = NULL; @@ -385,6 +507,13 @@ static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data) spin_unlock_irqrestore(&usbmisc->lock, flags); } + /* For HSIC controller */ + if (data->hsic) { + val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); + val |= MX6SX_BM_HSIC_AUTO_RESUME; + writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); + } + return 0; } @@ -444,9 +573,17 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data) reg = readl(usbmisc->base); if (data->disable_oc) { reg |= MX6_BM_OVER_CUR_DIS; - } else if (data->oc_polarity == 1) { - /* High active */ - reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY); + } else { + reg &= ~MX6_BM_OVER_CUR_DIS; + + /* + * If the polarity is not configured keep it as setup by the + * bootloader. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + reg |= MX6_BM_OVER_CUR_POLARITY; + else if (data->oc_pol_configured) + reg &= ~MX6_BM_OVER_CUR_POLARITY; } writel(reg, usbmisc->base); @@ -454,6 +591,7 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data) reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK; writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID, usbmisc->base + MX7D_USBNC_USB_CTRL2); + spin_unlock_irqrestore(&usbmisc->lock, flags); usbmisc_imx7d_set_wakeup(data, false); @@ -481,6 +619,8 @@ static const struct usbmisc_ops imx53_usbmisc_ops = { static const struct usbmisc_ops imx6q_usbmisc_ops = { .set_wakeup = usbmisc_imx6q_set_wakeup, .init = usbmisc_imx6q_init, + .hsic_set_connect = usbmisc_imx6_hsic_set_connect, + .hsic_set_clk = usbmisc_imx6_hsic_set_clk, }; static const struct usbmisc_ops vf610_usbmisc_ops = { @@ -490,6 +630,8 @@ static const struct usbmisc_ops vf610_usbmisc_ops = { static const struct usbmisc_ops imx6sx_usbmisc_ops = { .set_wakeup = usbmisc_imx6q_set_wakeup, .init = usbmisc_imx6sx_init, + .hsic_set_connect = usbmisc_imx6_hsic_set_connect, + .hsic_set_clk = usbmisc_imx6_hsic_set_clk, }; static const struct usbmisc_ops imx7d_usbmisc_ops = { @@ -546,6 +688,33 @@ int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled) } EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup); +int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); + if (!usbmisc->ops->hsic_set_connect || !data->hsic) + return 0; + return usbmisc->ops->hsic_set_connect(data); +} +EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_connect); + +int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on) +{ + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); + if (!usbmisc->ops->hsic_set_clk || !data->hsic) + return 0; + return usbmisc->ops->hsic_set_clk(data, on); +} +EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_clk); static const struct of_device_id usbmisc_imx_dt_ids[] = { { .compatible = "fsl,imx25-usbmisc", diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 1b68fed464cb..ed8c62b2d9d1 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -581,6 +581,13 @@ static int acm_tty_install(struct tty_driver *driver, struct tty_struct *tty) if (retval) goto error_init_termios; + /* + * Suppress initial echoing for some devices which might send data + * immediately after acm driver has been installed. + */ + if (acm->quirks & DISABLE_ECHO) + tty->termios.c_lflag &= ~ECHO; + tty->driver_data = acm; return 0; @@ -1657,6 +1664,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0e8d, 0x2000), /* MediaTek Inc Preloader */ + .driver_info = DISABLE_ECHO, /* DISABLE ECHO in termios flag */ + }, { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index ca06b20d7af9..515aad0847ee 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -140,3 +140,4 @@ struct acm { #define QUIRK_CONTROL_LINE_STATE BIT(6) #define CLEAR_HALT_CONDITIONS BIT(7) #define SEND_ZERO_PACKET BIT(8) +#define DISABLE_ECHO BIT(9) diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile index fb4d5ef4165c..0a7c45e85481 100644 --- a/drivers/usb/common/Makefile +++ b/drivers/usb/common/Makefile @@ -9,4 +9,3 @@ usb-common-$(CONFIG_USB_LED_TRIG) += led.o obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o obj-$(CONFIG_USB_ULPI_BUS) += ulpi.o -obj-$(CONFIG_USB_ROLE_SWITCH) += roles.o diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 487025d31d44..015b126ce455 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1074,8 +1074,6 @@ static int register_root_hub(struct usb_hcd *hcd) usb_dev->devnum = devnum; usb_dev->bus->devnum_next = devnum + 1; - memset (&usb_dev->bus->devmap.devicemap, 0, - sizeof usb_dev->bus->devmap.devicemap); set_bit (devnum, usb_dev->bus->devmap.devicemap); usb_set_device_state(usb_dev, USB_STATE_ADDRESS); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f76b2e0aba9d..1d1e61e980f3 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1112,6 +1112,16 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_PORT_FEAT_ENABLE); } + /* + * Add debounce if USB3 link is in polling/link training state. + * Link will automatically transition to Enabled state after + * link training completes. + */ + if (hub_is_superspeed(hdev) && + ((portstatus & USB_PORT_STAT_LINK_STATE) == + USB_SS_PORT_LS_POLLING)) + need_debounce_delay = true; + /* Clear status-change flags; we'll debounce later */ if (portchange & USB_PORT_STAT_C_CONNECTION) { need_debounce_delay = true; diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 2d6d2c8244de..68ad75a7460d 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -262,7 +262,7 @@ static void dwc2_gadget_wkup_alert_handler(struct dwc2_hsotg *hsotg) if (gintsts2 & GINTSTS2_WKUP_ALERT_INT) { dev_dbg(hsotg->dev, "%s: Wkup_Alert_Int\n", __func__); dwc2_clear_bit(hsotg, GINTSTS2, GINTSTS2_WKUP_ALERT_INT); - dwc2_set_bit(hsotg, DCFG, DCTL_RMTWKUPSIG); + dwc2_set_bit(hsotg, DCTL, DCTL_RMTWKUPSIG); } } @@ -3165,8 +3165,6 @@ static void kill_all_requests(struct dwc2_hsotg *hsotg, dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index); } -static int dwc2_hsotg_ep_disable(struct usb_ep *ep); - /** * dwc2_hsotg_disconnect - disconnect service * @hsotg: The device state. @@ -3188,9 +3186,11 @@ void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg) /* all endpoints should be shutdown */ for (ep = 0; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + kill_all_requests(hsotg, hsotg->eps_in[ep], + -ESHUTDOWN); if (hsotg->eps_out[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + kill_all_requests(hsotg, hsotg->eps_out[ep], + -ESHUTDOWN); } call_gadget(hsotg, disconnect); @@ -3234,6 +3234,7 @@ static void dwc2_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic) GINTSTS_PTXFEMP | \ GINTSTS_RXFLVL) +static int dwc2_hsotg_ep_disable(struct usb_ep *ep); /** * dwc2_hsotg_core_init - issue softreset to the core * @hsotg: The device state @@ -4069,10 +4070,8 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) struct dwc2_hsotg *hsotg = hs_ep->parent; int dir_in = hs_ep->dir_in; int index = hs_ep->index; - unsigned long flags; u32 epctrl_reg; u32 ctrl; - int locked; dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep); @@ -4088,10 +4087,6 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); - locked = spin_is_locked(&hsotg->lock); - if (!locked) - spin_lock_irqsave(&hsotg->lock, flags); - ctrl = dwc2_readl(hsotg, epctrl_reg); if (ctrl & DXEPCTL_EPENA) @@ -4114,12 +4109,22 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) hs_ep->fifo_index = 0; hs_ep->fifo_size = 0; - if (!locked) - spin_unlock_irqrestore(&hsotg->lock, flags); - return 0; } +static int dwc2_hsotg_ep_disable_lock(struct usb_ep *ep) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + unsigned long flags; + int ret; + + spin_lock_irqsave(&hsotg->lock, flags); + ret = dwc2_hsotg_ep_disable(ep); + spin_unlock_irqrestore(&hsotg->lock, flags); + return ret; +} + /** * on_list - check request is on the given endpoint * @ep: The endpoint to check. @@ -4267,7 +4272,7 @@ static int dwc2_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value) static const struct usb_ep_ops dwc2_hsotg_ep_ops = { .enable = dwc2_hsotg_ep_enable, - .disable = dwc2_hsotg_ep_disable, + .disable = dwc2_hsotg_ep_disable_lock, .alloc_request = dwc2_hsotg_ep_alloc_request, .free_request = dwc2_hsotg_ep_free_request, .queue = dwc2_hsotg_ep_queue_lock, @@ -4407,9 +4412,9 @@ static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget) /* all endpoints should be shutdown */ for (ep = 1; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep); if (hsotg->eps_out[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep); } spin_lock_irqsave(&hsotg->lock, flags); @@ -4857,9 +4862,9 @@ int dwc2_hsotg_suspend(struct dwc2_hsotg *hsotg) for (ep = 0; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep); if (hsotg->eps_out[ep]) - dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep); } } @@ -5026,6 +5031,7 @@ void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg) val |= hsotg->params.lpm_clock_gating ? GLPMCFG_ENBLSLPM : 0; val |= hsotg->params.hird_threshold << GLPMCFG_HIRD_THRES_SHIFT; val |= hsotg->params.besl ? GLPMCFG_ENBESL : 0; + val |= GLPMCFG_LPM_ACCEPT_CTRL_ISOC; dwc2_writel(hsotg, val, GLPMCFG); dev_dbg(hsotg->dev, "GLPMCFG=0x%08x\n", dwc2_readl(hsotg, GLPMCFG)); diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index 3f9bccc95add..c089ffa1f0a8 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -366,7 +366,7 @@ struct dwc2_qh { u32 desc_list_sz; u32 *n_bytes; struct timer_list unreserve_timer; - struct timer_list wait_timer; + struct hrtimer wait_timer; struct dwc2_tt *dwc_tt; int ttport; unsigned tt_buffer_dirty:1; diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index 40839591d2ec..ea3aa640c15c 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -59,7 +59,7 @@ #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5)) /* If we get a NAK, wait this long before retrying */ -#define DWC2_RETRY_WAIT_DELAY (msecs_to_jiffies(1)) +#define DWC2_RETRY_WAIT_DELAY 1*1E6L /** * dwc2_periodic_channel_available() - Checks that a channel is available for a @@ -1464,10 +1464,12 @@ static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg, * qh back to the "inactive" list, then queues transactions. * * @t: Pointer to wait_timer in a qh. + * + * Return: HRTIMER_NORESTART to not automatically restart this timer. */ -static void dwc2_wait_timer_fn(struct timer_list *t) +static enum hrtimer_restart dwc2_wait_timer_fn(struct hrtimer *t) { - struct dwc2_qh *qh = from_timer(qh, t, wait_timer); + struct dwc2_qh *qh = container_of(t, struct dwc2_qh, wait_timer); struct dwc2_hsotg *hsotg = qh->hsotg; unsigned long flags; @@ -1491,6 +1493,7 @@ static void dwc2_wait_timer_fn(struct timer_list *t) } spin_unlock_irqrestore(&hsotg->lock, flags); + return HRTIMER_NORESTART; } /** @@ -1521,7 +1524,8 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, /* Initialize QH */ qh->hsotg = hsotg; timer_setup(&qh->unreserve_timer, dwc2_unreserve_timer_fn, 0); - timer_setup(&qh->wait_timer, dwc2_wait_timer_fn, 0); + hrtimer_init(&qh->wait_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + qh->wait_timer.function = &dwc2_wait_timer_fn; qh->ep_type = ep_type; qh->ep_is_in = ep_is_in; @@ -1690,7 +1694,7 @@ void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) * won't do anything anyway, but we want it to finish before we free * memory. */ - del_timer_sync(&qh->wait_timer); + hrtimer_cancel(&qh->wait_timer); dwc2_host_put_tt_info(hsotg, qh->dwc_tt); @@ -1716,6 +1720,7 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) { int status; u32 intr_mask; + ktime_t delay; if (dbg_qh(qh)) dev_vdbg(hsotg->dev, "%s()\n", __func__); @@ -1734,8 +1739,8 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) list_add_tail(&qh->qh_list_entry, &hsotg->non_periodic_sched_waiting); qh->wait_timer_cancel = false; - mod_timer(&qh->wait_timer, - jiffies + DWC2_RETRY_WAIT_DELAY + 1); + delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY); + hrtimer_start(&qh->wait_timer, delay, HRTIMER_MODE_REL); } else { list_add_tail(&qh->qh_list_entry, &hsotg->non_periodic_sched_inactive); diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index 2b1ea441b7d4..98af924a9a5c 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -333,6 +333,8 @@ #define GLPMCFG_SNDLPM BIT(24) #define GLPMCFG_RETRY_CNT_MASK (0x7 << 21) #define GLPMCFG_RETRY_CNT_SHIFT 21 +#define GLPMCFG_LPM_ACCEPT_CTRL_CONTROL BIT(21) +#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC BIT(22) #define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17) #define GLPMCFG_LPM_CHNL_INDX_SHIFT 17 #define GLPMCFG_L1RESUMEOK BIT(16) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 7c1b6938f212..24ff5f21cb25 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -71,6 +71,13 @@ static void dwc2_set_his_params(struct dwc2_hsotg *hsotg) p->power_down = false; } +static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->power_down = 0; +} + static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) { struct dwc2_core_params *p = &hsotg->params; @@ -111,6 +118,7 @@ static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg) p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 << GAHBCFG_HBSTLEN_SHIFT; + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; } static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg) @@ -151,7 +159,8 @@ const struct of_device_id dwc2_of_match_table[] = { { .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params }, { .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params }, { .compatible = "snps,dwc2" }, - { .compatible = "samsung,s3c6400-hsotg" }, + { .compatible = "samsung,s3c6400-hsotg", + .data = dwc2_set_s3c6400_params }, { .compatible = "amlogic,meson8-usb", .data = dwc2_set_amlogic_params }, { .compatible = "amlogic,meson8b-usb", diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 2f2048aa5fde..a1b126f90261 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -80,11 +80,12 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) mode = USB_DR_MODE_PERIPHERAL; /* - * dwc_usb31 does not support OTG mode. If the controller - * supports DRD but the dr_mode is not specified or set to OTG, - * then set the mode to peripheral. + * DWC_usb31 and DWC_usb3 v3.30a and higher do not support OTG + * mode. If the controller supports DRD but the dr_mode is not + * specified or set to OTG, then set the mode to peripheral. */ - if (mode == USB_DR_MODE_OTG && dwc3_is_usb31(dwc)) + if (mode == USB_DR_MODE_OTG && + dwc->revision >= DWC3_REVISION_330A) mode = USB_DR_MODE_PERIPHERAL; } @@ -661,6 +662,8 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_enblslpm_quirk) reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + else + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM; if (dwc->dis_u2_freeclk_exists_quirk) reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; @@ -702,6 +705,7 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc) /* Detected DWC_usb31 IP */ dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER); dwc->revision |= DWC3_REVISION_IS_DWC31; + dwc->version_type = dwc3_readl(dwc->regs, DWC3_VER_TYPE); } else { return false; } @@ -1244,8 +1248,12 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,is-utmi-l1-suspend"); device_property_read_u8(dev, "snps,hird-threshold", &hird_threshold); + dwc->dis_start_transfer_quirk = device_property_read_bool(dev, + "snps,dis-start-transfer-quirk"); dwc->usb3_lpm_capable = device_property_read_bool(dev, "snps,usb3_lpm_capable"); + dwc->usb2_lpm_disable = device_property_read_bool(dev, + "snps,usb2-lpm-disable"); device_property_read_u8(dev, "snps,rx-thr-num-pkt-prd", &rx_thr_num_pkt_prd); device_property_read_u8(dev, "snps,rx-max-burst-prd", @@ -1482,7 +1490,8 @@ static int dwc3_probe(struct platform_device *pdev) ret = dwc3_core_init(dwc); if (ret) { - dev_err(dev, "failed to initialize core\n"); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to initialize core: %d\n", ret); goto err4; } diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 5bfb62533e0f..df876418cb78 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -37,6 +37,7 @@ #define DWC3_EP0_SETUP_SIZE 512 #define DWC3_ENDPOINTS_NUM 32 #define DWC3_XHCI_RESOURCES_NUM 2 +#define DWC3_ISOC_MAX_RETRIES 5 #define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */ #define DWC3_EVENT_BUFFERS_SIZE 4096 @@ -174,13 +175,19 @@ #define DWC3_GSBUSCFG0_INCRBRSTENA (1 << 0) /* undefined length enable */ #define DWC3_GSBUSCFG0_INCRBRST_MASK 0xff +/* Global Debug LSP MUX Select */ +#define DWC3_GDBGLSPMUX_ENDBC BIT(15) /* Host only */ +#define DWC3_GDBGLSPMUX_HOSTSELECT(n) ((n) & 0x3fff) +#define DWC3_GDBGLSPMUX_DEVSELECT(n) (((n) & 0xf) << 4) +#define DWC3_GDBGLSPMUX_EPSELECT(n) ((n) & 0xf) + /* Global Debug Queue/FIFO Space Available Register */ #define DWC3_GDBGFIFOSPACE_NUM(n) ((n) & 0x1f) #define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0) #define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff) -#define DWC3_TXFIFOQ 0 -#define DWC3_RXFIFOQ 1 +#define DWC3_TXFIFO 0 +#define DWC3_RXFIFO 1 #define DWC3_TXREQQ 2 #define DWC3_RXREQQ 3 #define DWC3_RXINFOQ 4 @@ -253,6 +260,9 @@ #define DWC3_GSTS_DEVICE_IP BIT(6) #define DWC3_GSTS_CSR_TIMEOUT BIT(5) #define DWC3_GSTS_BUS_ERR_ADDR_VLD BIT(4) +#define DWC3_GSTS_CURMOD(n) ((n) & 0x3) +#define DWC3_GSTS_CURMOD_DEVICE 0 +#define DWC3_GSTS_CURMOD_HOST 1 /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST BIT(31) @@ -321,6 +331,7 @@ #define DWC3_GHWPARAMS1_EN_PWROPT_HIB 2 #define DWC3_GHWPARAMS1_PWROPT(n) ((n) << 24) #define DWC3_GHWPARAMS1_PWROPT_MASK DWC3_GHWPARAMS1_PWROPT(3) +#define DWC3_GHWPARAMS1_ENDBC BIT(31) /* Global HWPARAMS3 Register */ #define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3) @@ -636,9 +647,9 @@ struct dwc3_event_buffer { /** * struct dwc3_ep - device side endpoint representation * @endpoint: usb endpoint + * @cancelled_list: list of cancelled requests for this endpoint * @pending_list: list of pending requests for this endpoint * @started_list: list of started requests on this endpoint - * @wait_end_transfer: wait_queue_head_t for waiting on End Transfer complete * @lock: spinlock for endpoint request queue traversal * @regs: pointer to first endpoint register * @trb_pool: array of transaction buffers @@ -656,14 +667,17 @@ struct dwc3_event_buffer { * @name: a human readable name e.g. ep1out-bulk * @direction: true for TX, false for RX * @stream_capable: true when streams are enabled + * @combo_num: the test combination BIT[15:14] of the frame number to test + * isochronous START TRANSFER command failure workaround + * @start_cmd_status: the status of testing START TRANSFER command with + * combo_num = 'b00 */ struct dwc3_ep { struct usb_ep endpoint; + struct list_head cancelled_list; struct list_head pending_list; struct list_head started_list; - wait_queue_head_t wait_end_transfer; - spinlock_t lock; void __iomem *regs; @@ -705,6 +719,10 @@ struct dwc3_ep { unsigned direction:1; unsigned stream_capable:1; + + /* For isochronous START TRANSFER workaround only */ + u8 combo_num; + int start_cmd_status; }; enum dwc3_phy { @@ -766,6 +784,7 @@ enum dwc3_link_state { #define DWC3_TRB_CTRL_ISP_IMI BIT(10) #define DWC3_TRB_CTRL_IOC BIT(11) #define DWC3_TRB_CTRL_SID_SOFN(n) (((n) & 0xffff) << 14) +#define DWC3_TRB_CTRL_GET_SID_SOFN(n) (((n) & (0xffff << 14)) >> 14) #define DWC3_TRBCTL_TYPE(n) ((n) & (0x3f << 4)) #define DWC3_TRBCTL_NORMAL DWC3_TRB_CTRL_TRBCTL(1) @@ -847,11 +866,12 @@ struct dwc3_hwparams { * @epnum: endpoint number to which this request refers * @trb: pointer to struct dwc3_trb * @trb_dma: DMA address of @trb - * @unaligned: true for OUT endpoints with length not divisible by maxp + * @num_trbs: number of TRBs used by this request + * @needs_extra_trb: true when request needs one extra TRB (either due to ZLP + * or unaligned OUT) * @direction: IN or OUT direction flag * @mapped: true when request has been dma-mapped * @started: request is started - * @zero: wants a ZLP */ struct dwc3_request { struct usb_request request; @@ -867,11 +887,12 @@ struct dwc3_request { struct dwc3_trb *trb; dma_addr_t trb_dma; - unsigned unaligned:1; + unsigned num_trbs; + + unsigned needs_extra_trb:1; unsigned direction:1; unsigned mapped:1; unsigned started:1; - unsigned zero:1; }; /* @@ -918,6 +939,7 @@ struct dwc3_scratchpad_array { * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) * @revision: revision register contents + * @version_type: VERSIONTYPE register contents, a sub release of a revision * @dr_mode: requested mode of operation * @current_dr_role: current role of operation when in dual-role mode * @desired_dr_role: desired role of operation when in dual-role mode @@ -945,6 +967,7 @@ struct dwc3_scratchpad_array { * @hwparams: copy of hwparams registers * @root: debugfs root folder pointer * @regset: debugfs pointer to regdump file + * @dbg_lsp_select: current debug lsp mux register selection * @test_mode: true when we're entering a USB test mode * @test_mode_nr: test feature selector * @lpm_nyet_threshold: LPM NYET response threshold @@ -970,7 +993,10 @@ struct dwc3_scratchpad_array { * @pullups_connected: true when Run/Stop bit is set * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @three_stage_setup: set if we perform a three phase setup + * @dis_start_transfer_quirk: set if start_transfer failure SW workaround is + * not needed for DWC_usb31 version 1.70a-ea06 and below * @usb3_lpm_capable: set if hadrware supports Link Power Management + * @usb2_lpm_disable: set to disable usb2 lpm * @disable_scramble_quirk: set if we enable the disable scramble quirk * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk @@ -1095,6 +1121,7 @@ struct dwc3 { #define DWC3_REVISION_290A 0x5533290a #define DWC3_REVISION_300A 0x5533300a #define DWC3_REVISION_310A 0x5533310a +#define DWC3_REVISION_330A 0x5533330a /* * NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really @@ -1103,6 +1130,17 @@ struct dwc3 { #define DWC3_REVISION_IS_DWC31 0x80000000 #define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_DWC31) #define DWC3_USB31_REVISION_120A (0x3132302a | DWC3_REVISION_IS_DWC31) +#define DWC3_USB31_REVISION_160A (0x3136302a | DWC3_REVISION_IS_DWC31) +#define DWC3_USB31_REVISION_170A (0x3137302a | DWC3_REVISION_IS_DWC31) + + u32 version_type; + +#define DWC31_VERSIONTYPE_EA01 0x65613031 +#define DWC31_VERSIONTYPE_EA02 0x65613032 +#define DWC31_VERSIONTYPE_EA03 0x65613033 +#define DWC31_VERSIONTYPE_EA04 0x65613034 +#define DWC31_VERSIONTYPE_EA05 0x65613035 +#define DWC31_VERSIONTYPE_EA06 0x65613036 enum dwc3_ep0_next ep0_next_event; enum dwc3_ep0_state ep0state; @@ -1121,6 +1159,8 @@ struct dwc3 { struct dentry *root; struct debugfs_regset32 *regset; + u32 dbg_lsp_select; + u8 test_mode; u8 test_mode_nr; u8 lpm_nyet_threshold; @@ -1145,7 +1185,9 @@ struct dwc3 { unsigned pullups_connected:1; unsigned setup_packet_pending:1; unsigned three_stage_setup:1; + unsigned dis_start_transfer_quirk:1; unsigned usb3_lpm_capable:1; + unsigned usb2_lpm_disable:1; unsigned disable_scramble_quirk:1; unsigned u2exit_lfps_quirk:1; diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index c66d216dcc30..4f75ab3505b7 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -117,6 +117,35 @@ dwc3_gadget_link_string(enum dwc3_link_state link_state) } /** + * dwc3_gadget_hs_link_string - returns highspeed and below link name + * @link_state: link state code + */ +static inline const char * +dwc3_gadget_hs_link_string(enum dwc3_link_state link_state) +{ + switch (link_state) { + case DWC3_LINK_STATE_U0: + return "On"; + case DWC3_LINK_STATE_U2: + return "Sleep"; + case DWC3_LINK_STATE_U3: + return "Suspend"; + case DWC3_LINK_STATE_SS_DIS: + return "Disconnected"; + case DWC3_LINK_STATE_RX_DET: + return "Early Suspend"; + case DWC3_LINK_STATE_RECOV: + return "Recovery"; + case DWC3_LINK_STATE_RESET: + return "Reset"; + case DWC3_LINK_STATE_RESUME: + return "Resume"; + default: + return "UNKNOWN link state\n"; + } +} + +/** * dwc3_trb_type_string - returns TRB type as a string * @type: the type of the TRB */ diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index df8e73ec3342..1c792710348f 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -25,6 +25,8 @@ #include "io.h" #include "debug.h" +#define DWC3_LSP_MUX_UNSELECTED 0xfffff + #define dump_register(nm) \ { \ .name = __stringify(nm), \ @@ -82,10 +84,6 @@ static const struct debugfs_reg32 dwc3_regs[] = { dump_register(GDBGFIFOSPACE), dump_register(GDBGLTSSM), dump_register(GDBGBMU), - dump_register(GDBGLSPMUX), - dump_register(GDBGLSP), - dump_register(GDBGEPINFO0), - dump_register(GDBGEPINFO1), dump_register(GPRTBIMAP_HS0), dump_register(GPRTBIMAP_HS1), dump_register(GPRTBIMAP_FS0), @@ -279,6 +277,114 @@ static const struct debugfs_reg32 dwc3_regs[] = { dump_register(OSTS), }; +static void dwc3_host_lsp(struct seq_file *s) +{ + struct dwc3 *dwc = s->private; + bool dbc_enabled; + u32 sel; + u32 reg; + u32 val; + + dbc_enabled = !!(dwc->hwparams.hwparams1 & DWC3_GHWPARAMS1_ENDBC); + + sel = dwc->dbg_lsp_select; + if (sel == DWC3_LSP_MUX_UNSELECTED) { + seq_puts(s, "Write LSP selection to print for host\n"); + return; + } + + reg = DWC3_GDBGLSPMUX_HOSTSELECT(sel); + + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + val = dwc3_readl(dwc->regs, DWC3_GDBGLSP); + seq_printf(s, "GDBGLSP[%d] = 0x%08x\n", sel, val); + + if (dbc_enabled && sel < 256) { + reg |= DWC3_GDBGLSPMUX_ENDBC; + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + val = dwc3_readl(dwc->regs, DWC3_GDBGLSP); + seq_printf(s, "GDBGLSP_DBC[%d] = 0x%08x\n", sel, val); + } +} + +static void dwc3_gadget_lsp(struct seq_file *s) +{ + struct dwc3 *dwc = s->private; + int i; + u32 reg; + + for (i = 0; i < 16; i++) { + reg = DWC3_GDBGLSPMUX_DEVSELECT(i); + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + reg = dwc3_readl(dwc->regs, DWC3_GDBGLSP); + seq_printf(s, "GDBGLSP[%d] = 0x%08x\n", i, reg); + } +} + +static int dwc3_lsp_show(struct seq_file *s, void *unused) +{ + struct dwc3 *dwc = s->private; + unsigned int current_mode; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&dwc->lock, flags); + reg = dwc3_readl(dwc->regs, DWC3_GSTS); + current_mode = DWC3_GSTS_CURMOD(reg); + + switch (current_mode) { + case DWC3_GSTS_CURMOD_HOST: + dwc3_host_lsp(s); + break; + case DWC3_GSTS_CURMOD_DEVICE: + dwc3_gadget_lsp(s); + break; + default: + seq_puts(s, "Mode is unknown, no LSP register printed\n"); + break; + } + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +static int dwc3_lsp_open(struct inode *inode, struct file *file) +{ + return single_open(file, dwc3_lsp_show, inode->i_private); +} + +static ssize_t dwc3_lsp_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct dwc3 *dwc = s->private; + unsigned long flags; + char buf[32] = { 0 }; + u32 sel; + int ret; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + ret = kstrtouint(buf, 0, &sel); + if (ret) + return ret; + + spin_lock_irqsave(&dwc->lock, flags); + dwc->dbg_lsp_select = sel; + spin_unlock_irqrestore(&dwc->lock, flags); + + return count; +} + +static const struct file_operations dwc3_lsp_fops = { + .open = dwc3_lsp_open, + .write = dwc3_lsp_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int dwc3_mode_show(struct seq_file *s, void *unused) { struct dwc3 *dwc = s->private; @@ -433,13 +539,24 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused) unsigned long flags; enum dwc3_link_state state; u32 reg; + u8 speed; spin_lock_irqsave(&dwc->lock, flags); + reg = dwc3_readl(dwc->regs, DWC3_GSTS); + if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) { + seq_puts(s, "Not available\n"); + spin_unlock_irqrestore(&dwc->lock, flags); + return 0; + } + reg = dwc3_readl(dwc->regs, DWC3_DSTS); state = DWC3_DSTS_USBLNKST(reg); - spin_unlock_irqrestore(&dwc->lock, flags); + speed = reg & DWC3_DSTS_CONNECTSPD; - seq_printf(s, "%s\n", dwc3_gadget_link_string(state)); + seq_printf(s, "%s\n", (speed >= DWC3_DSTS_SUPERSPEED) ? + dwc3_gadget_link_string(state) : + dwc3_gadget_hs_link_string(state)); + spin_unlock_irqrestore(&dwc->lock, flags); return 0; } @@ -457,6 +574,8 @@ static ssize_t dwc3_link_state_write(struct file *file, unsigned long flags; enum dwc3_link_state state = 0; char buf[32]; + u32 reg; + u8 speed; if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; @@ -477,6 +596,21 @@ static ssize_t dwc3_link_state_write(struct file *file, return -EINVAL; spin_lock_irqsave(&dwc->lock, flags); + reg = dwc3_readl(dwc->regs, DWC3_GSTS); + if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) { + spin_unlock_irqrestore(&dwc->lock, flags); + return -EINVAL; + } + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + speed = reg & DWC3_DSTS_CONNECTSPD; + + if (speed < DWC3_DSTS_SUPERSPEED && + state != DWC3_LINK_STATE_RECOV) { + spin_unlock_irqrestore(&dwc->lock, flags); + return -EINVAL; + } + dwc3_gadget_set_link_state(dwc, state); spin_unlock_irqrestore(&dwc->lock, flags); @@ -496,7 +630,7 @@ struct dwc3_ep_file_map { const struct file_operations *const fops; }; -static int dwc3_tx_fifo_queue_show(struct seq_file *s, void *unused) +static int dwc3_tx_fifo_size_show(struct seq_file *s, void *unused) { struct dwc3_ep *dep = s->private; struct dwc3 *dwc = dep->dwc; @@ -504,14 +638,18 @@ static int dwc3_tx_fifo_queue_show(struct seq_file *s, void *unused) u32 val; spin_lock_irqsave(&dwc->lock, flags); - val = dwc3_core_fifo_space(dep, DWC3_TXFIFOQ); + val = dwc3_core_fifo_space(dep, DWC3_TXFIFO); + + /* Convert to bytes */ + val *= DWC3_MDWIDTH(dwc->hwparams.hwparams0); + val >>= 3; seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); return 0; } -static int dwc3_rx_fifo_queue_show(struct seq_file *s, void *unused) +static int dwc3_rx_fifo_size_show(struct seq_file *s, void *unused) { struct dwc3_ep *dep = s->private; struct dwc3 *dwc = dep->dwc; @@ -519,7 +657,11 @@ static int dwc3_rx_fifo_queue_show(struct seq_file *s, void *unused) u32 val; spin_lock_irqsave(&dwc->lock, flags); - val = dwc3_core_fifo_space(dep, DWC3_RXFIFOQ); + val = dwc3_core_fifo_space(dep, DWC3_RXFIFO); + + /* Convert to bytes */ + val *= DWC3_MDWIDTH(dwc->hwparams.hwparams0); + val >>= 3; seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); @@ -675,8 +817,32 @@ out: return 0; } -DEFINE_SHOW_ATTRIBUTE(dwc3_tx_fifo_queue); -DEFINE_SHOW_ATTRIBUTE(dwc3_rx_fifo_queue); +static int dwc3_ep_info_register_show(struct seq_file *s, void *unused) +{ + struct dwc3_ep *dep = s->private; + struct dwc3 *dwc = dep->dwc; + unsigned long flags; + u64 ep_info; + u32 lower_32_bits; + u32 upper_32_bits; + u32 reg; + + spin_lock_irqsave(&dwc->lock, flags); + reg = DWC3_GDBGLSPMUX_EPSELECT(dep->number); + dwc3_writel(dwc->regs, DWC3_GDBGLSPMUX, reg); + + lower_32_bits = dwc3_readl(dwc->regs, DWC3_GDBGEPINFO0); + upper_32_bits = dwc3_readl(dwc->regs, DWC3_GDBGEPINFO1); + + ep_info = ((u64)upper_32_bits << 32) | lower_32_bits; + seq_printf(s, "0x%016llx\n", ep_info); + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(dwc3_tx_fifo_size); +DEFINE_SHOW_ATTRIBUTE(dwc3_rx_fifo_size); DEFINE_SHOW_ATTRIBUTE(dwc3_tx_request_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_rx_request_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_rx_info_queue); @@ -684,10 +850,11 @@ DEFINE_SHOW_ATTRIBUTE(dwc3_descriptor_fetch_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_event_queue); DEFINE_SHOW_ATTRIBUTE(dwc3_transfer_type); DEFINE_SHOW_ATTRIBUTE(dwc3_trb_ring); +DEFINE_SHOW_ATTRIBUTE(dwc3_ep_info_register); static const struct dwc3_ep_file_map dwc3_ep_file_map[] = { - { "tx_fifo_queue", &dwc3_tx_fifo_queue_fops, }, - { "rx_fifo_queue", &dwc3_rx_fifo_queue_fops, }, + { "tx_fifo_size", &dwc3_tx_fifo_size_fops, }, + { "rx_fifo_size", &dwc3_rx_fifo_size_fops, }, { "tx_request_queue", &dwc3_tx_request_queue_fops, }, { "rx_request_queue", &dwc3_rx_request_queue_fops, }, { "rx_info_queue", &dwc3_rx_info_queue_fops, }, @@ -695,6 +862,7 @@ static const struct dwc3_ep_file_map dwc3_ep_file_map[] = { { "event_queue", &dwc3_event_queue_fops, }, { "transfer_type", &dwc3_transfer_type_fops, }, { "trb_ring", &dwc3_trb_ring_fops, }, + { "GDBGEPINFO", &dwc3_ep_info_register_fops, }, }; static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep, @@ -742,6 +910,8 @@ void dwc3_debugfs_init(struct dwc3 *dwc) if (!dwc->regset) return; + dwc->dbg_lsp_select = DWC3_LSP_MUX_UNSELECTED; + dwc->regset->regs = dwc3_regs; dwc->regset->nregs = ARRAY_SIZE(dwc3_regs); dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START; @@ -751,6 +921,9 @@ void dwc3_debugfs_init(struct dwc3 *dwc) debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset); + debugfs_create_file("lsp_dump", S_IRUGO | S_IWUSR, root, dwc, + &dwc3_lsp_fops); + if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) { debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, dwc, &dwc3_mode_fops); diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 218371f985ca..869725d15c74 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -10,6 +10,7 @@ #include <linux/extcon.h> #include <linux/of_graph.h> #include <linux/platform_device.h> +#include <linux/property.h> #include "debug.h" #include "core.h" @@ -445,9 +446,19 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) struct device *dev = dwc->dev; struct device_node *np_phy, *np_conn; struct extcon_dev *edev; + const char *name; - if (of_property_read_bool(dev->of_node, "extcon")) - return extcon_get_edev_by_phandle(dwc->dev, 0); + if (device_property_read_bool(dev, "extcon")) + return extcon_get_edev_by_phandle(dev, 0); + + /* + * Device tree platforms should get extcon via phandle. + * On ACPI platforms, we get the name from a device property. + * This device property is for kernel internal use only and + * is expected to be set by the glue code. + */ + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) + return extcon_get_extcon_dev(name); np_phy = of_parse_phandle(dev->of_node, "phys", 0); np_conn = of_graph_get_remote_node(np_phy, -1, -1); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 842795856bf4..fdc6e4e403e8 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -170,20 +170,20 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc) * put the gpio descriptors again here because the phy driver * might want to grab them, too. */ - gpio = devm_gpiod_get_optional(&pdev->dev, "cs", - GPIOD_OUT_LOW); + gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW); if (IS_ERR(gpio)) return PTR_ERR(gpio); gpiod_set_value_cansleep(gpio, 1); + gpiod_put(gpio); - gpio = devm_gpiod_get_optional(&pdev->dev, "reset", - GPIOD_OUT_LOW); + gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(gpio)) return PTR_ERR(gpio); if (gpio) { gpiod_set_value_cansleep(gpio, 1); + gpiod_put(gpio); usleep_range(10000, 11000); } } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 9f92ee03dde7..07bd31bb2f8a 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -27,7 +27,7 @@ #include "gadget.h" #include "io.h" -#define DWC3_ALIGN_FRAME(d) (((d)->frame_number + (d)->interval) \ +#define DWC3_ALIGN_FRAME(d, n) (((d)->frame_number + ((d)->interval * (n))) \ & ~((d)->interval - 1)) /** @@ -647,8 +647,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) reg |= DWC3_DALEPENA_EP(dep->number); dwc3_writel(dwc->regs, DWC3_DALEPENA, reg); - init_waitqueue_head(&dep->wait_end_transfer); - if (usb_endpoint_xfer_control(desc)) goto out; @@ -672,7 +670,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) * Issue StartTransfer here with no-op TRB so we can always rely on No * Response Update Transfer command. */ - if (usb_endpoint_xfer_bulk(desc) || + if ((usb_endpoint_xfer_bulk(desc) && !dep->stream_capable) || usb_endpoint_xfer_int(desc)) { struct dwc3_gadget_ep_cmd_params params; struct dwc3_trb *trb; @@ -919,8 +917,6 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, struct usb_gadget *gadget = &dwc->gadget; enum usb_device_speed speed = gadget->speed; - dwc3_ep_inc_enq(dep); - trb->size = DWC3_TRB_SIZE_LENGTH(length); trb->bpl = lower_32_bits(dma); trb->bph = upper_32_bits(dma); @@ -990,16 +986,20 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, usb_endpoint_type(dep->endpoint.desc)); } - /* always enable Continue on Short Packet */ + /* + * Enable Continue on Short Packet + * when endpoint is not a stream capable + */ if (usb_endpoint_dir_out(dep->endpoint.desc)) { - trb->ctrl |= DWC3_TRB_CTRL_CSP; + if (!dep->stream_capable) + trb->ctrl |= DWC3_TRB_CTRL_CSP; if (short_not_ok) trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; } if ((!no_interrupt && !chain) || - (dwc3_calc_trbs_left(dep) == 0)) + (dwc3_calc_trbs_left(dep) == 1)) trb->ctrl |= DWC3_TRB_CTRL_IOC; if (chain) @@ -1010,6 +1010,8 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, trb->ctrl |= DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_enq(dep); + trace_dwc3_prepare_trb(dep, trb); } @@ -1046,6 +1048,8 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, req->trb_dma = dwc3_trb_dma_offset(dep, trb); } + req->num_trbs++; + __dwc3_prepare_one_trb(dep, trb, dma, length, chain, node, stream_id, short_not_ok, no_interrupt); } @@ -1073,13 +1077,14 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; - req->unaligned = true; + req->needs_extra_trb = true; /* prepare normal TRB */ dwc3_prepare_one_trb(dep, req, true, i); /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem, false, 1, req->request.stream_id, @@ -1117,13 +1122,14 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; - req->unaligned = true; + req->needs_extra_trb = true; /* prepare normal TRB */ dwc3_prepare_one_trb(dep, req, true, 0); /* Now prepare one extra TRB to align transfer size */ trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem, false, 1, req->request.stream_id, req->request.short_not_ok, @@ -1133,13 +1139,14 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, struct dwc3 *dwc = dep->dwc; struct dwc3_trb *trb; - req->zero = true; + req->needs_extra_trb = true; /* prepare normal TRB */ dwc3_prepare_one_trb(dep, req, true, 0); /* Now prepare one extra TRB to handle ZLP */ trb = &dep->trb_pool[dep->trb_enqueue]; + req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0, false, 1, req->request.stream_id, req->request.short_not_ok, @@ -1232,6 +1239,9 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) params.param1 = lower_32_bits(req->trb_dma); cmd = DWC3_DEPCMD_STARTTRANSFER; + if (dep->stream_capable) + cmd |= DWC3_DEPCMD_PARAM(req->request.stream_id); + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) cmd |= DWC3_DEPCMD_PARAM(dep->frame_number); } else { @@ -1263,17 +1273,151 @@ static int __dwc3_gadget_get_frame(struct dwc3 *dwc) return DWC3_DSTS_SOFFN(reg); } -static void __dwc3_gadget_start_isoc(struct dwc3_ep *dep) +/** + * dwc3_gadget_start_isoc_quirk - workaround invalid frame number + * @dep: isoc endpoint + * + * This function tests for the correct combination of BIT[15:14] from the 16-bit + * microframe number reported by the XferNotReady event for the future frame + * number to start the isoc transfer. + * + * In DWC_usb31 version 1.70a-ea06 and prior, for highspeed and fullspeed + * isochronous IN, BIT[15:14] of the 16-bit microframe number reported by the + * XferNotReady event are invalid. The driver uses this number to schedule the + * isochronous transfer and passes it to the START TRANSFER command. Because + * this number is invalid, the command may fail. If BIT[15:14] matches the + * internal 16-bit microframe, the START TRANSFER command will pass and the + * transfer will start at the scheduled time, if it is off by 1, the command + * will still pass, but the transfer will start 2 seconds in the future. For all + * other conditions, the START TRANSFER command will fail with bus-expiry. + * + * In order to workaround this issue, we can test for the correct combination of + * BIT[15:14] by sending START TRANSFER commands with different values of + * BIT[15:14]: 'b00, 'b01, 'b10, and 'b11. Each combination is 2^14 uframe apart + * (or 2 seconds). 4 seconds into the future will result in a bus-expiry status. + * As the result, within the 4 possible combinations for BIT[15:14], there will + * be 2 successful and 2 failure START COMMAND status. One of the 2 successful + * command status will result in a 2-second delay start. The smaller BIT[15:14] + * value is the correct combination. + * + * Since there are only 4 outcomes and the results are ordered, we can simply + * test 2 START TRANSFER commands with BIT[15:14] combinations 'b00 and 'b01 to + * deduce the smaller successful combination. + * + * Let test0 = test status for combination 'b00 and test1 = test status for 'b01 + * of BIT[15:14]. The correct combination is as follow: + * + * if test0 fails and test1 passes, BIT[15:14] is 'b01 + * if test0 fails and test1 fails, BIT[15:14] is 'b10 + * if test0 passes and test1 fails, BIT[15:14] is 'b11 + * if test0 passes and test1 passes, BIT[15:14] is 'b00 + * + * Synopsys STAR 9001202023: Wrong microframe number for isochronous IN + * endpoints. + */ +static int dwc3_gadget_start_isoc_quirk(struct dwc3_ep *dep) +{ + int cmd_status = 0; + bool test0; + bool test1; + + while (dep->combo_num < 2) { + struct dwc3_gadget_ep_cmd_params params; + u32 test_frame_number; + u32 cmd; + + /* + * Check if we can start isoc transfer on the next interval or + * 4 uframes in the future with BIT[15:14] as dep->combo_num + */ + test_frame_number = dep->frame_number & 0x3fff; + test_frame_number |= dep->combo_num << 14; + test_frame_number += max_t(u32, 4, dep->interval); + + params.param0 = upper_32_bits(dep->dwc->bounce_addr); + params.param1 = lower_32_bits(dep->dwc->bounce_addr); + + cmd = DWC3_DEPCMD_STARTTRANSFER; + cmd |= DWC3_DEPCMD_PARAM(test_frame_number); + cmd_status = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + + /* Redo if some other failure beside bus-expiry is received */ + if (cmd_status && cmd_status != -EAGAIN) { + dep->start_cmd_status = 0; + dep->combo_num = 0; + return 0; + } + + /* Store the first test status */ + if (dep->combo_num == 0) + dep->start_cmd_status = cmd_status; + + dep->combo_num++; + + /* + * End the transfer if the START_TRANSFER command is successful + * to wait for the next XferNotReady to test the command again + */ + if (cmd_status == 0) { + dwc3_stop_active_transfer(dep, true); + return 0; + } + } + + /* test0 and test1 are both completed at this point */ + test0 = (dep->start_cmd_status == 0); + test1 = (cmd_status == 0); + + if (!test0 && test1) + dep->combo_num = 1; + else if (!test0 && !test1) + dep->combo_num = 2; + else if (test0 && !test1) + dep->combo_num = 3; + else if (test0 && test1) + dep->combo_num = 0; + + dep->frame_number &= 0x3fff; + dep->frame_number |= dep->combo_num << 14; + dep->frame_number += max_t(u32, 4, dep->interval); + + /* Reinitialize test variables */ + dep->start_cmd_status = 0; + dep->combo_num = 0; + + return __dwc3_gadget_kick_transfer(dep); +} + +static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep) { + struct dwc3 *dwc = dep->dwc; + int ret; + int i; + if (list_empty(&dep->pending_list)) { - dev_info(dep->dwc->dev, "%s: ran out of requests\n", - dep->name); dep->flags |= DWC3_EP_PENDING_REQUEST; - return; + return -EAGAIN; + } + + if (!dwc->dis_start_transfer_quirk && dwc3_is_usb31(dwc) && + (dwc->revision <= DWC3_USB31_REVISION_160A || + (dwc->revision == DWC3_USB31_REVISION_170A && + dwc->version_type >= DWC31_VERSIONTYPE_EA01 && + dwc->version_type <= DWC31_VERSIONTYPE_EA06))) { + + if (dwc->gadget.speed <= USB_SPEED_HIGH && dep->direction) + return dwc3_gadget_start_isoc_quirk(dep); } - dep->frame_number = DWC3_ALIGN_FRAME(dep); - __dwc3_gadget_kick_transfer(dep); + for (i = 0; i < DWC3_ISOC_MAX_RETRIES; i++) { + dep->frame_number = DWC3_ALIGN_FRAME(dep, i + 1); + + ret = __dwc3_gadget_kick_transfer(dep); + if (ret != -EAGAIN) + break; + } + + return ret; } static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) @@ -1314,8 +1458,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) if ((dep->flags & DWC3_EP_PENDING_REQUEST)) { if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) { - __dwc3_gadget_start_isoc(dep); - return 0; + return __dwc3_gadget_start_isoc(dep); } } } @@ -1341,6 +1484,40 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, return ret; } +static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *req) +{ + int i; + + /* + * If request was already started, this means we had to + * stop the transfer. With that we also need to ignore + * all TRBs used by the request, however TRBs can only + * be modified after completion of END_TRANSFER + * command. So what we do here is that we wait for + * END_TRANSFER completion and only after that, we jump + * over TRBs by clearing HWO and incrementing dequeue + * pointer. + */ + for (i = 0; i < req->num_trbs; i++) { + struct dwc3_trb *trb; + + trb = req->trb + i; + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + dwc3_ep_inc_deq(dep); + } +} + +static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep) +{ + struct dwc3_request *req; + struct dwc3_request *tmp; + + list_for_each_entry_safe(req, tmp, &dep->cancelled_list, list) { + dwc3_gadget_ep_skip_trbs(dep, req); + dwc3_gadget_giveback(dep, req, -ECONNRESET); + } +} + static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request) { @@ -1371,68 +1548,11 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, /* wait until it is processed */ dwc3_stop_active_transfer(dep, true); - /* - * If request was already started, this means we had to - * stop the transfer. With that we also need to ignore - * all TRBs used by the request, however TRBs can only - * be modified after completion of END_TRANSFER - * command. So what we do here is that we wait for - * END_TRANSFER completion and only after that, we jump - * over TRBs by clearing HWO and incrementing dequeue - * pointer. - * - * Note that we have 2 possible types of transfers here: - * - * i) Linear buffer request - * ii) SG-list based request - * - * SG-list based requests will have r->num_pending_sgs - * set to a valid number (> 0). Linear requests, - * normally use a single TRB. - * - * For each of these two cases, if r->unaligned flag is - * set, one extra TRB has been used to align transfer - * size to wMaxPacketSize. - * - * All of these cases need to be taken into - * consideration so we don't mess up our TRB ring - * pointers. - */ - wait_event_lock_irq(dep->wait_end_transfer, - !(dep->flags & DWC3_EP_END_TRANSFER_PENDING), - dwc->lock); - if (!r->trb) goto out0; - if (r->num_pending_sgs) { - struct dwc3_trb *trb; - int i = 0; - - for (i = 0; i < r->num_pending_sgs; i++) { - trb = r->trb + i; - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - } - - if (r->unaligned || r->zero) { - trb = r->trb + r->num_pending_sgs + 1; - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - } - } else { - struct dwc3_trb *trb = r->trb; - - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - - if (r->unaligned || r->zero) { - trb = r->trb + 1; - trb->ctrl &= ~DWC3_TRB_CTRL_HWO; - dwc3_ep_inc_deq(dep); - } - } - goto out1; + dwc3_gadget_move_cancelled_request(req); + goto out0; } dev_err(dwc->dev, "request %pK was not queued to %s\n", request, ep->name); @@ -1440,9 +1560,6 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, goto out0; } -out1: - /* giveback the request */ - dwc3_gadget_giveback(dep, req, -ECONNRESET); out0: @@ -1934,8 +2051,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g) { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; - int epnum; - u32 tmo_eps = 0; spin_lock_irqsave(&dwc->lock, flags); @@ -1944,36 +2059,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g) __dwc3_gadget_stop(dwc); - for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) { - struct dwc3_ep *dep = dwc->eps[epnum]; - int ret; - - if (!dep) - continue; - - if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) - continue; - - ret = wait_event_interruptible_lock_irq_timeout(dep->wait_end_transfer, - !(dep->flags & DWC3_EP_END_TRANSFER_PENDING), - dwc->lock, msecs_to_jiffies(5)); - - if (ret <= 0) { - /* Timed out or interrupted! There's nothing much - * we can do so we just log here and print which - * endpoints timed out at the end. - */ - tmo_eps |= 1 << epnum; - dep->flags &= DWC3_EP_END_TRANSFER_PENDING; - } - } - - if (tmo_eps) { - dev_err(dwc->dev, - "end transfer timed out on endpoints 0x%x [bitmap]\n", - tmo_eps); - } - out: dwc->gadget_driver = NULL; spin_unlock_irqrestore(&dwc->lock, flags); @@ -2148,6 +2233,8 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) dep->direction = direction; dep->regs = dwc->regs + DWC3_DEP_BASE(epnum); dwc->eps[epnum] = dep; + dep->combo_num = 0; + dep->start_cmd_status = 0; snprintf(dep->name, sizeof(dep->name), "ep%u%s", num, direction ? "in" : "out"); @@ -2176,6 +2263,7 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) INIT_LIST_HEAD(&dep->pending_list); INIT_LIST_HEAD(&dep->started_list); + INIT_LIST_HEAD(&dep->cancelled_list); return 0; } @@ -2235,6 +2323,7 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, dwc3_ep_inc_deq(dep); trace_dwc3_complete_trb(dep, trb); + req->num_trbs--; /* * If we're in the middle of series of chained TRBs and we @@ -2250,11 +2339,25 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, trb->ctrl &= ~DWC3_TRB_CTRL_HWO; /* + * For isochronous transfers, the first TRB in a service interval must + * have the Isoc-First type. Track and report its interval frame number. + */ + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && + (trb->ctrl & DWC3_TRBCTL_ISOCHRONOUS_FIRST)) { + unsigned int frame_number; + + frame_number = DWC3_TRB_CTRL_GET_SID_SOFN(trb->ctrl); + frame_number &= ~(dep->interval - 1); + req->request.frame_number = frame_number; + } + + /* * If we're dealing with unaligned size OUT transfer, we will be left * with one TRB pending in the ring. We need to manually clear HWO bit * from that TRB. */ - if ((req->zero || req->unaligned) && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) { + + if (req->needs_extra_trb && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) { trb->ctrl &= ~DWC3_TRB_CTRL_HWO; return 1; } @@ -2331,11 +2434,10 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status); - if (req->unaligned || req->zero) { + if (req->needs_extra_trb) { ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status); - req->unaligned = false; - req->zero = false; + req->needs_extra_trb = false; } req->request.actual = req->request.length - req->remaining; @@ -2430,7 +2532,7 @@ static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep, const struct dwc3_event_depevt *event) { dwc3_gadget_endpoint_frame_from_event(dep, event); - __dwc3_gadget_start_isoc(dep); + (void) __dwc3_gadget_start_isoc(dep); } static void dwc3_endpoint_interrupt(struct dwc3 *dwc, @@ -2468,7 +2570,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, if (cmd == DWC3_DEPCMD_ENDTRANSFER) { dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING; - wake_up(&dep->wait_end_transfer); + dwc3_gadget_ep_cleanup_cancelled_requests(dep); } break; case DWC3_DEPEVT_STREAMEVT: diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 2aacd1afd9ff..023a473648eb 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -79,6 +79,21 @@ static inline void dwc3_gadget_move_started_request(struct dwc3_request *req) list_move_tail(&req->list, &dep->started_list); } +/** + * dwc3_gadget_move_cancelled_request - move @req to the cancelled_list + * @req: the request to be moved + * + * Caller should take care of locking. This function will move @req from its + * current list to the endpoint's cancelled_list. + */ +static inline void dwc3_gadget_move_cancelled_request(struct dwc3_request *req) +{ + struct dwc3_ep *dep = req->dep; + + req->started = false; + list_move_tail(&req->list, &dep->cancelled_list); +} + void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, int status); diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 1a3878a3be78..f55947294f7c 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -46,7 +46,7 @@ out: int dwc3_host_init(struct dwc3 *dwc) { - struct property_entry props[3]; + struct property_entry props[4]; struct platform_device *xhci; int ret, irq; struct resource *res; @@ -93,6 +93,9 @@ int dwc3_host_init(struct dwc3 *dwc) if (dwc->usb3_lpm_capable) props[prop_idx++].name = "usb3-lpm-capable"; + if (dwc->usb2_lpm_disable) + props[prop_idx++].name = "usb2-lpm-disable"; + /** * WORKAROUND: dwc3 revisions <=3.00a have a limitation * where Port Disable command doesn't work. diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index f22714cce070..e97a00593dda 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -199,7 +199,7 @@ DECLARE_EVENT_CLASS(dwc3_log_gadget_ep_cmd, __entry->param2 = params->param2; __entry->cmd_status = cmd_status; ), - TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x --> status: %s", + TP_printk("%s: cmd '%s' [%x] params %08x %08x %08x --> status: %s", __get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd), __entry->cmd, __entry->param0, __entry->param1, __entry->param2, @@ -251,9 +251,11 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, s = "2x "; break; case 3: + default: s = "3x "; break; } + break; default: s = ""; } s; }), diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index d633c2abe5a4..ea0d531c63e2 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -631,28 +631,28 @@ static int ehci_reset_port(int port) if (!(portsc & PORT_RESET)) break; } - if (portsc & PORT_RESET) { - /* force reset to complete */ - loop = 100 * 1000; - writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), - &ehci_regs->port_status[port - 1]); - do { - udelay(1); - portsc = readl(&ehci_regs->port_status[port-1]); - } while ((portsc & PORT_RESET) && (--loop > 0)); - } + if (portsc & PORT_RESET) { + /* force reset to complete */ + loop = 100 * 1000; + writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), + &ehci_regs->port_status[port - 1]); + do { + udelay(1); + portsc = readl(&ehci_regs->port_status[port-1]); + } while ((portsc & PORT_RESET) && (--loop > 0)); + } - /* Device went away? */ - if (!(portsc & PORT_CONNECT)) - return -ENOTCONN; + /* Device went away? */ + if (!(portsc & PORT_CONNECT)) + return -ENOTCONN; - /* bomb out completely if something weird happened */ - if ((portsc & PORT_CSC)) - return -EINVAL; + /* bomb out completely if something weird happened */ + if ((portsc & PORT_CSC)) + return -EINVAL; - /* If we've finished resetting, then break out of the loop */ - if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) - return 0; + /* If we've finished resetting, then break out of the loop */ + if (!(portsc & PORT_RESET) && (portsc & PORT_PE)) + return 0; return -EBUSY; } diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 31e8bf3578c8..1e5430438703 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -18,11 +18,15 @@ #include <linux/pagemap.h> #include <linux/export.h> #include <linux/hid.h> +#include <linux/mm.h> #include <linux/module.h> +#include <linux/scatterlist.h> #include <linux/sched/signal.h> #include <linux/uio.h> +#include <linux/vmalloc.h> #include <asm/unaligned.h> +#include <linux/usb/ccid.h> #include <linux/usb/composite.h> #include <linux/usb/functionfs.h> @@ -218,6 +222,8 @@ struct ffs_io_data { struct usb_ep *ep; struct usb_request *req; + struct sg_table sgt; + bool use_sg; struct ffs_data *ffs; }; @@ -749,6 +755,65 @@ static ssize_t ffs_copy_to_iter(void *data, int data_len, struct iov_iter *iter) return ret; } +/* + * allocate a virtually contiguous buffer and create a scatterlist describing it + * @sg_table - pointer to a place to be filled with sg_table contents + * @size - required buffer size + */ +static void *ffs_build_sg_list(struct sg_table *sgt, size_t sz) +{ + struct page **pages; + void *vaddr, *ptr; + unsigned int n_pages; + int i; + + vaddr = vmalloc(sz); + if (!vaddr) + return NULL; + + n_pages = PAGE_ALIGN(sz) >> PAGE_SHIFT; + pages = kvmalloc_array(n_pages, sizeof(struct page *), GFP_KERNEL); + if (!pages) { + vfree(vaddr); + + return NULL; + } + for (i = 0, ptr = vaddr; i < n_pages; ++i, ptr += PAGE_SIZE) + pages[i] = vmalloc_to_page(ptr); + + if (sg_alloc_table_from_pages(sgt, pages, n_pages, 0, sz, GFP_KERNEL)) { + kvfree(pages); + vfree(vaddr); + + return NULL; + } + kvfree(pages); + + return vaddr; +} + +static inline void *ffs_alloc_buffer(struct ffs_io_data *io_data, + size_t data_len) +{ + if (io_data->use_sg) + return ffs_build_sg_list(&io_data->sgt, data_len); + + return kmalloc(data_len, GFP_KERNEL); +} + +static inline void ffs_free_buffer(struct ffs_io_data *io_data) +{ + if (!io_data->buf) + return; + + if (io_data->use_sg) { + sg_free_table(&io_data->sgt); + vfree(io_data->buf); + } else { + kfree(io_data->buf); + } +} + static void ffs_user_copy_worker(struct work_struct *work) { struct ffs_io_data *io_data = container_of(work, struct ffs_io_data, @@ -776,7 +841,7 @@ static void ffs_user_copy_worker(struct work_struct *work) if (io_data->read) kfree(io_data->to_free); - kfree(io_data->buf); + ffs_free_buffer(io_data); kfree(io_data); } @@ -932,6 +997,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) * earlier */ gadget = epfile->ffs->gadget; + io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE; spin_lock_irq(&epfile->ffs->eps_lock); /* In the meantime, endpoint got disabled or changed. */ @@ -948,7 +1014,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) data_len = usb_ep_align_maybe(gadget, ep->ep, data_len); spin_unlock_irq(&epfile->ffs->eps_lock); - data = kmalloc(data_len, GFP_KERNEL); + data = ffs_alloc_buffer(io_data, data_len); if (unlikely(!data)) { ret = -ENOMEM; goto error_mutex; @@ -988,8 +1054,16 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) bool interrupted = false; req = ep->req; - req->buf = data; - req->length = data_len; + if (io_data->use_sg) { + req->buf = NULL; + req->sg = io_data->sgt.sgl; + req->num_sgs = io_data->sgt.nents; + } else { + req->buf = data; + } + req->length = data_len; + + io_data->buf = data; req->context = &done; req->complete = ffs_epfile_io_complete; @@ -1022,8 +1096,14 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) } else if (!(req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC))) { ret = -ENOMEM; } else { - req->buf = data; - req->length = data_len; + if (io_data->use_sg) { + req->buf = NULL; + req->sg = io_data->sgt.sgl; + req->num_sgs = io_data->sgt.nents; + } else { + req->buf = data; + } + req->length = data_len; io_data->buf = data; io_data->ep = ep->ep; @@ -1052,7 +1132,7 @@ error_lock: error_mutex: mutex_unlock(&epfile->mutex); error: - kfree(data); + ffs_free_buffer(io_data); return ret; } @@ -1926,7 +2006,7 @@ typedef int (*ffs_os_desc_callback)(enum ffs_os_desc_type entity, static int __must_check ffs_do_single_desc(char *data, unsigned len, ffs_entity_callback entity, - void *priv) + void *priv, int *current_class) { struct usb_descriptor_header *_ds = (void *)data; u8 length; @@ -1984,6 +2064,7 @@ static int __must_check ffs_do_single_desc(char *data, unsigned len, __entity(INTERFACE, ds->bInterfaceNumber); if (ds->iInterface) __entity(STRING, ds->iInterface); + *current_class = ds->bInterfaceClass; } break; @@ -1997,11 +2078,22 @@ static int __must_check ffs_do_single_desc(char *data, unsigned len, } break; - case HID_DT_HID: - pr_vdebug("hid descriptor\n"); - if (length != sizeof(struct hid_descriptor)) - goto inv_length; - break; + case USB_TYPE_CLASS | 0x01: + if (*current_class == USB_INTERFACE_CLASS_HID) { + pr_vdebug("hid descriptor\n"); + if (length != sizeof(struct hid_descriptor)) + goto inv_length; + break; + } else if (*current_class == USB_INTERFACE_CLASS_CCID) { + pr_vdebug("ccid descriptor\n"); + if (length != sizeof(struct ccid_descriptor)) + goto inv_length; + break; + } else { + pr_vdebug("unknown descriptor: %d for class %d\n", + _ds->bDescriptorType, *current_class); + return -EINVAL; + } case USB_DT_OTG: if (length != sizeof(struct usb_otg_descriptor)) @@ -2058,6 +2150,7 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len, { const unsigned _len = len; unsigned long num = 0; + int current_class = -1; ENTER(); @@ -2078,7 +2171,8 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len, if (!data) return _len - len; - ret = ffs_do_single_desc(data, len, entity, priv); + ret = ffs_do_single_desc(data, len, entity, priv, + ¤t_class); if (unlikely(ret < 0)) { pr_debug("%s returns %d\n", __func__, ret); return ret; diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c index f2497cb96abb..61e2c94cc0b0 100644 --- a/drivers/usb/gadget/function/uvc_queue.c +++ b/drivers/usb/gadget/function/uvc_queue.c @@ -102,7 +102,7 @@ static void uvc_buffer_queue(struct vb2_buffer *vb) spin_unlock_irqrestore(&queue->irqlock, flags); } -static struct vb2_ops uvc_queue_qops = { +static const struct vb2_ops uvc_queue_qops = { .queue_setup = uvc_queue_setup, .buf_prepare = uvc_buffer_prepare, .buf_queue = uvc_buffer_queue, diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c index f0233912bace..6b1b16b17d7d 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/dev.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c @@ -438,7 +438,7 @@ static int ast_vhub_udc_stop(struct usb_gadget *gadget) return 0; } -static struct usb_gadget_ops ast_vhub_udc_ops = { +static const struct usb_gadget_ops ast_vhub_udc_ops = { .get_frame = ast_vhub_udc_get_frame, .wakeup = ast_vhub_udc_wakeup, .pullup = ast_vhub_udc_pullup, diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c index afaea11ec771..55c8c8abeacd 100644 --- a/drivers/usb/gadget/udc/pch_udc.c +++ b/drivers/usb/gadget/udc/pch_udc.c @@ -1330,7 +1330,7 @@ static void pch_vbus_gpio_work_rise(struct work_struct *irq_work) } /** - * pch_vbus_gpio_irq() - IRQ handler for GPIO intrerrupt for changing VBUS + * pch_vbus_gpio_irq() - IRQ handler for GPIO interrupt for changing VBUS * @irq: Interrupt request number * @dev: Reference to the device structure * diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index cdffbd1e0316..6e34f9594159 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -358,6 +358,7 @@ struct renesas_usb3 { bool extcon_host; /* check id and set EXTCON_USB_HOST */ bool extcon_usb; /* check vbus and set EXTCON_USB */ bool forced_b_device; + bool start_to_connect; }; #define gadget_to_renesas_usb3(_gadget) \ @@ -476,7 +477,8 @@ static void usb3_init_axi_bridge(struct renesas_usb3 *usb3) static void usb3_init_epc_registers(struct renesas_usb3 *usb3) { usb3_write(usb3, ~0, USB3_USB_INT_STA_1); - usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); + if (!usb3->workaround_for_vbus) + usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); } static bool usb3_wakeup_usb2_phy(struct renesas_usb3 *usb3) @@ -700,8 +702,7 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev) usb3_set_mode_by_role_sw(usb3, host); usb3_vbus_out(usb3, a_dev); /* for A-Peripheral or forced B-device mode */ - if ((!host && a_dev) || - (usb3->workaround_for_vbus && usb3->forced_b_device)) + if ((!host && a_dev) || usb3->start_to_connect) usb3_connect(usb3); spin_unlock_irqrestore(&usb3->lock, flags); } @@ -2432,7 +2433,11 @@ static ssize_t renesas_usb3_b_device_write(struct file *file, if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; - if (!strncmp(buf, "1", 1)) + usb3->start_to_connect = false; + if (usb3->workaround_for_vbus && usb3->forced_b_device && + !strncmp(buf, "2", 1)) + usb3->start_to_connect = true; + else if (!strncmp(buf, "1", 1)) usb3->forced_b_device = true; else usb3->forced_b_device = false; @@ -2440,7 +2445,7 @@ static ssize_t renesas_usb3_b_device_write(struct file *file, if (usb3->workaround_for_vbus) usb3_disconnect(usb3); - /* Let this driver call usb3_connect() anyway */ + /* Let this driver call usb3_connect() if needed */ usb3_check_id(usb3); return count; diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index 8bf5ad7a59ad..af3e63316ace 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -119,7 +119,7 @@ static void dprintk(int level, const char *fmt, ...) } #endif -static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) +static int s3c2410_udc_debugfs_show(struct seq_file *m, void *p) { u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg; u32 ep_int_en_reg, usb_int_en_reg, ep0_csr; @@ -168,20 +168,7 @@ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) return 0; } - -static int s3c2410_udc_debugfs_fops_open(struct inode *inode, - struct file *file) -{ - return single_open(file, s3c2410_udc_debugfs_seq_show, NULL); -} - -static const struct file_operations s3c2410_udc_debugfs_fops = { - .open = s3c2410_udc_debugfs_fops_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; +DEFINE_SHOW_ATTRIBUTE(s3c2410_udc_debugfs); /* io macros */ diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 7e4c13346a1e..7d20296cbe9f 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -159,11 +159,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* get the PHY device */ phy = devm_usb_get_phy_by_phandle(dev, "phys", i); if (IS_ERR(phy)) { - /* Don't bail out if PHY is not absolutely necessary */ - if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) + ret = PTR_ERR(phy); + if (ret == -ENODEV) { /* no PHY */ + phy = NULL; continue; + } - ret = PTR_ERR(phy); if (ret != -EPROBE_DEFER) dev_err(dev, "Can't get PHY for port %d: %d\n", i, ret); diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index b21c386e6a46..28bf8bfb091e 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2159,25 +2159,15 @@ static int isp1362_show(struct seq_file *s, void *unused) return 0; } - -static int isp1362_open(struct inode *inode, struct file *file) -{ - return single_open(file, isp1362_show, inode); -} - -static const struct file_operations debug_ops = { - .open = isp1362_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(isp1362); /* expect just one isp1362_hcd per system */ static void create_debug_file(struct isp1362_hcd *isp1362_hcd) { isp1362_hcd->debug_file = debugfs_create_file("isp1362", S_IRUGO, usb_debug_root, - isp1362_hcd, &debug_ops); + isp1362_hcd, + &isp1362_fops); } static void remove_debug_file(struct isp1362_hcd *isp1362_hcd) diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c index b3da3f12e5b1..3965ac0341eb 100644 --- a/drivers/usb/host/ohci-mem.c +++ b/drivers/usb/host/ohci-mem.c @@ -57,14 +57,10 @@ static int ohci_mem_init (struct ohci_hcd *ohci) static void ohci_mem_cleanup (struct ohci_hcd *ohci) { - if (ohci->td_cache) { - dma_pool_destroy (ohci->td_cache); - ohci->td_cache = NULL; - } - if (ohci->ed_cache) { - dma_pool_destroy (ohci->ed_cache); - ohci->ed_cache = NULL; - } + dma_pool_destroy(ohci->td_cache); + ohci->td_cache = NULL; + dma_pool_destroy(ohci->ed_cache); + ohci->ed_cache = NULL; } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 984892dd72f5..42668aeca57c 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1979,6 +1979,8 @@ static int r8a66597_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, static void r8a66597_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) +__acquires(r8a66597->lock) +__releases(r8a66597->lock) { struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd); struct r8a66597_pipe *pipe = (struct r8a66597_pipe *)hep->hcpriv; @@ -1991,13 +1993,14 @@ static void r8a66597_endpoint_disable(struct usb_hcd *hcd, return; pipenum = pipe->info.pipenum; + spin_lock_irqsave(&r8a66597->lock, flags); if (pipenum == 0) { kfree(hep->hcpriv); hep->hcpriv = NULL; + spin_unlock_irqrestore(&r8a66597->lock, flags); return; } - spin_lock_irqsave(&r8a66597->lock, flags); pipe_stop(r8a66597, pipe); pipe_irq_disable(r8a66597, pipenum); disable_irq_empty(r8a66597, pipenum); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 01b5818a4be5..e2eece693655 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -714,13 +714,6 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port, } } -/* Updates Link Status for USB 2.1 port */ -static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg) -{ - if ((status_reg & PORT_PLS_MASK) == XDEV_U2) - *status |= USB_PORT_STAT_L1; -} - /* Updates Link Status for super Speed port */ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, u32 *status, u32 status_reg) @@ -802,6 +795,100 @@ static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, } } +static int xhci_handle_usb2_port_link_resume(struct xhci_port *port, + u32 *status, u32 portsc, + unsigned long flags) +{ + struct xhci_bus_state *bus_state; + struct xhci_hcd *xhci; + struct usb_hcd *hcd; + int slot_id; + u32 wIndex; + + hcd = port->rhub->hcd; + bus_state = &port->rhub->bus_state; + xhci = hcd_to_xhci(hcd); + wIndex = port->hcd_portnum; + + if ((portsc & PORT_RESET) || !(portsc & PORT_PE)) { + *status = 0xffffffff; + return -EINVAL; + } + /* did port event handler already start resume timing? */ + if (!bus_state->resume_done[wIndex]) { + /* If not, maybe we are in a host initated resume? */ + if (test_bit(wIndex, &bus_state->resuming_ports)) { + /* Host initated resume doesn't time the resume + * signalling using resume_done[]. + * It manually sets RESUME state, sleeps 20ms + * and sets U0 state. This should probably be + * changed, but not right now. + */ + } else { + /* port resume was discovered now and here, + * start resume timing + */ + unsigned long timeout = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); + + set_bit(wIndex, &bus_state->resuming_ports); + bus_state->resume_done[wIndex] = timeout; + mod_timer(&hcd->rh_timer, timeout); + usb_hcd_start_port_resume(&hcd->self, wIndex); + } + /* Has resume been signalled for USB_RESUME_TIME yet? */ + } else if (time_after_eq(jiffies, bus_state->resume_done[wIndex])) { + int time_left; + + xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); + + set_bit(wIndex, &bus_state->rexit_ports); + + xhci_test_and_clear_bit(xhci, port, PORT_PLC); + xhci_set_link_state(xhci, port, XDEV_U0); + + spin_unlock_irqrestore(&xhci->lock, flags); + time_left = wait_for_completion_timeout( + &bus_state->rexit_done[wIndex], + msecs_to_jiffies(XHCI_MAX_REXIT_TIMEOUT_MS)); + spin_lock_irqsave(&xhci->lock, flags); + + if (time_left) { + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); + if (!slot_id) { + xhci_dbg(xhci, "slot_id is zero\n"); + *status = 0xffffffff; + return -ENODEV; + } + xhci_ring_device(xhci, slot_id); + } else { + int port_status = readl(port->addr); + + xhci_warn(xhci, "Port resume %i msec timed out, portsc = 0x%x\n", + XHCI_MAX_REXIT_TIMEOUT_MS, + port_status); + *status |= USB_PORT_STAT_SUSPEND; + clear_bit(wIndex, &bus_state->rexit_ports); + } + + usb_hcd_end_port_resume(&hcd->self, wIndex); + bus_state->port_c_suspend |= 1 << wIndex; + bus_state->suspended_ports &= ~(1 << wIndex); + } else { + /* + * The resume has been signaling for less than + * USB_RESUME_TIME. Report the port status as SUSPEND, + * let the usbcore check port status again and clear + * resume signaling later. + */ + *status |= USB_PORT_STAT_SUSPEND; + } + return 0; +} + static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) { u32 ext_stat = 0; @@ -818,6 +905,85 @@ static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) return ext_stat; } +static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, + u32 portsc) +{ + struct xhci_bus_state *bus_state; + struct xhci_hcd *xhci; + u32 link_state; + u32 portnum; + + bus_state = &port->rhub->bus_state; + xhci = hcd_to_xhci(port->rhub->hcd); + link_state = portsc & PORT_PLS_MASK; + portnum = port->hcd_portnum; + + /* USB3 specific wPortChange bits + * + * Port link change with port in resume state should not be + * reported to usbcore, as this is an internal state to be + * handled by xhci driver. Reporting PLC to usbcore may + * cause usbcore clearing PLC first and port change event + * irq won't be generated. + */ + + if (portsc & PORT_PLC && (link_state != XDEV_RESUME)) + *status |= USB_PORT_STAT_C_LINK_STATE << 16; + if (portsc & PORT_WRC) + *status |= USB_PORT_STAT_C_BH_RESET << 16; + if (portsc & PORT_CEC) + *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; + + /* USB3 specific wPortStatus bits */ + if (portsc & PORT_POWER) { + *status |= USB_SS_PORT_STAT_POWER; + /* link state handling */ + if (link_state == XDEV_U0) + bus_state->suspended_ports &= ~(1 << portnum); + } + + xhci_hub_report_usb3_link_state(xhci, status, portsc); + xhci_del_comp_mod_timer(xhci, portsc, portnum); +} + +static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, + u32 portsc, unsigned long flags) +{ + struct xhci_bus_state *bus_state; + u32 link_state; + u32 portnum; + int ret; + + bus_state = &port->rhub->bus_state; + link_state = portsc & PORT_PLS_MASK; + portnum = port->hcd_portnum; + + /* USB2 wPortStatus bits */ + if (portsc & PORT_POWER) { + *status |= USB_PORT_STAT_POWER; + + /* link state is only valid if port is powered */ + if (link_state == XDEV_U3) + *status |= USB_PORT_STAT_SUSPEND; + if (link_state == XDEV_U2) + *status |= USB_PORT_STAT_L1; + if (link_state == XDEV_U0) { + bus_state->resume_done[portnum] = 0; + clear_bit(portnum, &bus_state->resuming_ports); + if (bus_state->suspended_ports & (1 << portnum)) { + bus_state->suspended_ports &= ~(1 << portnum); + bus_state->port_c_suspend |= 1 << portnum; + } + } + if (link_state == XDEV_RESUME) { + ret = xhci_handle_usb2_port_link_resume(port, status, + portsc, flags); + if (ret) + return; + } + } +} + /* * Converts a raw xHCI port status into the format that external USB 2.0 or USB * 3.0 hubs use. @@ -835,16 +1001,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, __releases(&xhci->lock) __acquires(&xhci->lock) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 status = 0; - int slot_id; struct xhci_hub *rhub; struct xhci_port *port; rhub = xhci_get_rhub(hcd); port = rhub->ports[wIndex]; - /* wPortChange bits */ + /* common wPortChange bits */ if (raw_port_status & PORT_CSC) status |= USB_PORT_STAT_C_CONNECTION << 16; if (raw_port_status & PORT_PEC) @@ -853,107 +1017,25 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_C_OVERCURRENT << 16; if ((raw_port_status & PORT_RC)) status |= USB_PORT_STAT_C_RESET << 16; - /* USB3.0 only */ - if (hcd->speed >= HCD_USB3) { - /* Port link change with port in resume state should not be - * reported to usbcore, as this is an internal state to be - * handled by xhci driver. Reporting PLC to usbcore may - * cause usbcore clearing PLC first and port change event - * irq won't be generated. - */ - if ((raw_port_status & PORT_PLC) && - (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) - status |= USB_PORT_STAT_C_LINK_STATE << 16; - if ((raw_port_status & PORT_WRC)) - status |= USB_PORT_STAT_C_BH_RESET << 16; - if ((raw_port_status & PORT_CEC)) - status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; - } - if (hcd->speed < HCD_USB3) { - if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3 - && (raw_port_status & PORT_POWER)) - status |= USB_PORT_STAT_SUSPEND; + /* common wPortStatus bits */ + if (raw_port_status & PORT_CONNECT) { + status |= USB_PORT_STAT_CONNECTION; + status |= xhci_port_speed(raw_port_status); } - if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME && - !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) { - if ((raw_port_status & PORT_RESET) || - !(raw_port_status & PORT_PE)) - return 0xffffffff; - /* did port event handler already start resume timing? */ - if (!bus_state->resume_done[wIndex]) { - /* If not, maybe we are in a host initated resume? */ - if (test_bit(wIndex, &bus_state->resuming_ports)) { - /* Host initated resume doesn't time the resume - * signalling using resume_done[]. - * It manually sets RESUME state, sleeps 20ms - * and sets U0 state. This should probably be - * changed, but not right now. - */ - } else { - /* port resume was discovered now and here, - * start resume timing - */ - unsigned long timeout = jiffies + - msecs_to_jiffies(USB_RESUME_TIMEOUT); - - set_bit(wIndex, &bus_state->resuming_ports); - bus_state->resume_done[wIndex] = timeout; - mod_timer(&hcd->rh_timer, timeout); - usb_hcd_start_port_resume(&hcd->self, wIndex); - } - /* Has resume been signalled for USB_RESUME_TIME yet? */ - } else if (time_after_eq(jiffies, - bus_state->resume_done[wIndex])) { - int time_left; - - xhci_dbg(xhci, "Resume USB2 port %d\n", - wIndex + 1); - bus_state->resume_done[wIndex] = 0; - clear_bit(wIndex, &bus_state->resuming_ports); - - set_bit(wIndex, &bus_state->rexit_ports); - - xhci_test_and_clear_bit(xhci, port, PORT_PLC); - xhci_set_link_state(xhci, port, XDEV_U0); - - spin_unlock_irqrestore(&xhci->lock, flags); - time_left = wait_for_completion_timeout( - &bus_state->rexit_done[wIndex], - msecs_to_jiffies( - XHCI_MAX_REXIT_TIMEOUT_MS)); - spin_lock_irqsave(&xhci->lock, flags); - - if (time_left) { - slot_id = xhci_find_slot_id_by_port(hcd, - xhci, wIndex + 1); - if (!slot_id) { - xhci_dbg(xhci, "slot_id is zero\n"); - return 0xffffffff; - } - xhci_ring_device(xhci, slot_id); - } else { - int port_status = readl(port->addr); - xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", - XHCI_MAX_REXIT_TIMEOUT_MS, - port_status); - status |= USB_PORT_STAT_SUSPEND; - clear_bit(wIndex, &bus_state->rexit_ports); - } + if (raw_port_status & PORT_PE) + status |= USB_PORT_STAT_ENABLE; + if (raw_port_status & PORT_OC) + status |= USB_PORT_STAT_OVERCURRENT; + if (raw_port_status & PORT_RESET) + status |= USB_PORT_STAT_RESET; - usb_hcd_end_port_resume(&hcd->self, wIndex); - bus_state->port_c_suspend |= 1 << wIndex; - bus_state->suspended_ports &= ~(1 << wIndex); - } else { - /* - * The resume has been signaling for less than - * USB_RESUME_TIME. Report the port status as SUSPEND, - * let the usbcore check port status again and clear - * resume signaling later. - */ - status |= USB_PORT_STAT_SUSPEND; - } - } + /* USB2 and USB3 specific bits, including Port Link State */ + if (hcd->speed >= HCD_USB3) + xhci_get_usb3_port_status(port, &status, raw_port_status); + else + xhci_get_usb2_port_status(port, &status, raw_port_status, + flags); /* * Clear stale usb2 resume signalling variables in case port changed * state during resume signalling. For example on error @@ -967,44 +1049,6 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, usb_hcd_end_port_resume(&hcd->self, wIndex); } - - if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 && - (raw_port_status & PORT_POWER)) { - if (bus_state->suspended_ports & (1 << wIndex)) { - bus_state->suspended_ports &= ~(1 << wIndex); - if (hcd->speed < HCD_USB3) - bus_state->port_c_suspend |= 1 << wIndex; - } - bus_state->resume_done[wIndex] = 0; - clear_bit(wIndex, &bus_state->resuming_ports); - } - if (raw_port_status & PORT_CONNECT) { - status |= USB_PORT_STAT_CONNECTION; - status |= xhci_port_speed(raw_port_status); - } - if (raw_port_status & PORT_PE) - status |= USB_PORT_STAT_ENABLE; - if (raw_port_status & PORT_OC) - status |= USB_PORT_STAT_OVERCURRENT; - if (raw_port_status & PORT_RESET) - status |= USB_PORT_STAT_RESET; - if (raw_port_status & PORT_POWER) { - if (hcd->speed >= HCD_USB3) - status |= USB_SS_PORT_STAT_POWER; - else - status |= USB_PORT_STAT_POWER; - } - /* Update Port Link State */ - if (hcd->speed >= HCD_USB3) { - xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status); - /* - * Verify if all USB3 Ports Have entered U0 already. - * Delete Compliance Mode Timer if so. - */ - xhci_del_comp_mod_timer(xhci, raw_port_status, wIndex); - } else { - xhci_hub_report_usb2_link_state(&status, raw_port_status); - } if (bus_state->port_c_suspend & (1 << wIndex)) status |= USB_PORT_STAT_C_SUSPEND << 16; @@ -1031,7 +1075,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; spin_lock_irqsave(&xhci->lock, flags); switch (typeReq) { @@ -1421,7 +1465,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; /* Initial status is no changes */ retval = (max_ports + 8) / 8; @@ -1480,7 +1524,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; wake_enabled = hcd->self.root_hub->do_remote_wakeup; spin_lock_irqsave(&xhci->lock, flags); @@ -1623,7 +1667,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; if (time_before(jiffies, bus_state->next_statechange)) msleep(5); @@ -1724,13 +1768,10 @@ int xhci_bus_resume(struct usb_hcd *hcd) unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct xhci_bus_state *bus_state; - - bus_state = &xhci->bus_state[hcd_index(hcd)]; + struct xhci_hub *rhub = xhci_get_rhub(hcd); /* USB3 port wakeups are reported via usb_wakeup_notification() */ - return bus_state->resuming_ports; /* USB2 ports only */ + return rhub->bus_state.resuming_ports; /* USB2 ports only */ } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index b1f27aa38b10..36a3eb8849f1 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1922,8 +1922,8 @@ no_bw: xhci->page_size = 0; xhci->page_shift = 0; - xhci->bus_state[0].bus_suspended = 0; - xhci->bus_state[1].bus_suspended = 0; + xhci->usb2_rhub.bus_state.bus_suspended = 0; + xhci->usb3_rhub.bus_state.bus_suspended = 0; } static int xhci_test_trb_in_td(struct xhci_hcd *xhci, @@ -2181,23 +2181,11 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, if (major_revision < 0x03 && xhci->num_ext_caps < max_caps) xhci->ext_caps[xhci->num_ext_caps++] = temp; - /* Check the host's USB2 LPM capability */ - if ((xhci->hci_version == 0x96) && (major_revision != 0x03) && - (temp & XHCI_L1C)) { + if ((xhci->hci_version >= 0x100) && (major_revision != 0x03) && + (temp & XHCI_HLC)) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 0.96: support USB2 software lpm"); - xhci->sw_lpm_support = 1; - } - - if ((xhci->hci_version >= 0x100) && (major_revision != 0x03)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 1.0: support USB2 software lpm"); - xhci->sw_lpm_support = 1; - if (temp & XHCI_HLC) { - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 1.0: support USB2 hardware lpm"); - xhci->hw_lpm_support = 1; - } + "xHCI 1.0: support USB2 hardware lpm"); + xhci->hw_lpm_support = 1; } port_offset--; @@ -2536,10 +2524,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) for (i = 0; i < MAX_HC_SLOTS; i++) xhci->devs[i] = NULL; for (i = 0; i < USB_MAXCHILDREN; i++) { - xhci->bus_state[0].resume_done[i] = 0; - xhci->bus_state[1].resume_done[i] = 0; + xhci->usb2_rhub.bus_state.resume_done[i] = 0; + xhci->usb3_rhub.bus_state.resume_done[i] = 0; /* Only the USB 2.0 completions will ever be used. */ - init_completion(&xhci->bus_state[1].rexit_done[i]); + init_completion(&xhci->usb2_rhub.bus_state.rexit_done[i]); } if (scratchpad_alloc(xhci, flags)) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 65750582133f..40fa25c4d041 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1593,7 +1593,7 @@ static void handle_port_status(struct xhci_hcd *xhci, } hcd = port->rhub->hcd; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &port->rhub->bus_state; hcd_portnum = port->hcd_portnum; portsc = readl(port->addr); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index dae3be1b9c8f..46ab9c041091 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -169,7 +169,7 @@ int xhci_reset(struct xhci_hcd *xhci) { u32 command; u32 state; - int ret, i; + int ret; state = readl(&xhci->op_regs->status); @@ -215,11 +215,12 @@ int xhci_reset(struct xhci_hcd *xhci) ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, 10 * 1000 * 1000); - for (i = 0; i < 2; i++) { - xhci->bus_state[i].port_c_suspend = 0; - xhci->bus_state[i].suspended_ports = 0; - xhci->bus_state[i].resuming_ports = 0; - } + xhci->usb2_rhub.bus_state.port_c_suspend = 0; + xhci->usb2_rhub.bus_state.suspended_ports = 0; + xhci->usb2_rhub.bus_state.resuming_ports = 0; + xhci->usb3_rhub.bus_state.port_c_suspend = 0; + xhci->usb3_rhub.bus_state.suspended_ports = 0; + xhci->usb3_rhub.bus_state.resuming_ports = 0; return ret; } @@ -1087,9 +1088,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. */ - if (time_before(jiffies, xhci->bus_state[0].next_statechange) || - time_before(jiffies, - xhci->bus_state[1].next_statechange)) + + if (time_before(jiffies, xhci->usb2_rhub.bus_state.next_statechange) || + time_before(jiffies, xhci->usb3_rhub.bus_state.next_statechange)) msleep(100); set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -4388,8 +4389,7 @@ static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); int portnum = udev->portnum - 1; - if (hcd->speed >= HCD_USB3 || !xhci->sw_lpm_support || - !udev->lpm_capable) + if (hcd->speed >= HCD_USB3 || !udev->lpm_capable) return 0; /* we only support lpm for non-hub device connected to root hub yet */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 011dd45f8718..652dc36e3012 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1682,13 +1682,6 @@ struct xhci_bus_state { */ #define XHCI_MAX_REXIT_TIMEOUT_MS 20 -static inline unsigned int hcd_index(struct usb_hcd *hcd) -{ - if (hcd->speed >= HCD_USB3) - return 0; - else - return 1; -} struct xhci_port { __le32 __iomem *addr; int hw_portnum; @@ -1700,6 +1693,8 @@ struct xhci_hub { struct xhci_port **ports; unsigned int num_ports; struct usb_hcd *hcd; + /* keep track of bus suspend info */ + struct xhci_bus_state bus_state; /* supported prococol extended capabiliy values */ u8 maj_rev; u8 min_rev; @@ -1854,13 +1849,9 @@ struct xhci_hcd { unsigned int num_active_eps; unsigned int limit_active_eps; - /* There are two roothubs to keep track of bus suspend info for */ - struct xhci_bus_state bus_state[2]; struct xhci_port *hw_ports; struct xhci_hub usb2_rhub; struct xhci_hub usb3_rhub; - /* support xHCI 0.96 spec USB2 software LPM */ - unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ unsigned hw_lpm_support:1; /* Broken Suspend flag for SNPS Suspend resume issue */ diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 39ca31b4de46..ac92725458b5 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -69,7 +69,6 @@ struct appledisplay { struct delayed_work work; int button_pressed; - spinlock_t lock; struct mutex sysfslock; /* concurrent read and write */ }; @@ -79,7 +78,6 @@ static void appledisplay_complete(struct urb *urb) { struct appledisplay *pdata = urb->context; struct device *dev = &pdata->udev->dev; - unsigned long flags; int status = urb->status; int retval; @@ -105,8 +103,6 @@ static void appledisplay_complete(struct urb *urb) goto exit; } - spin_lock_irqsave(&pdata->lock, flags); - switch(pdata->urbdata[1]) { case ACD_BTN_BRIGHT_UP: case ACD_BTN_BRIGHT_DOWN: @@ -119,8 +115,6 @@ static void appledisplay_complete(struct urb *urb) break; } - spin_unlock_irqrestore(&pdata->lock, flags); - exit: retval = usb_submit_urb(pdata->urb, GFP_ATOMIC); if (retval) { @@ -229,7 +223,6 @@ static int appledisplay_probe(struct usb_interface *iface, pdata->udev = udev; - spin_lock_init(&pdata->lock); INIT_DELAYED_WORK(&pdata->work, appledisplay_work); mutex_init(&pdata->sysfslock); @@ -261,6 +254,7 @@ static int appledisplay_probe(struct usb_interface *iface, usb_rcvintpipe(udev, int_in_endpointAddr), pdata->urbdata, ACD_URB_BUFFER_LEN, appledisplay_complete, pdata, 1); + pdata->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; if (usb_submit_urb(pdata->urb, GFP_KERNEL)) { retval = -EIO; dev_err(&iface->dev, "Submitting URB failed\n"); diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index ae70b9bfd797..4fee200795a5 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -180,7 +180,7 @@ static void mtu3_intr_enable(struct mtu3 *mtu) mtu3_writel(mbase, U3D_LV1IESR, value); /* Enable U2 common USB interrupts */ - value = SUSPEND_INTR | RESUME_INTR | RESET_INTR | LPM_RESUME_INTR; + value = SUSPEND_INTR | RESUME_INTR | RESET_INTR; mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value); if (mtu->is_u3_ip) { @@ -484,7 +484,7 @@ void mtu3_ep0_setup(struct mtu3 *mtu) mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr); /* Enable EP0 interrupt */ - mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR); + mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR | SETUPENDISR); } static int mtu3_mem_alloc(struct mtu3 *mtu) @@ -578,12 +578,16 @@ static void mtu3_regs_init(struct mtu3 *mtu) if (mtu->is_u3_ip) { /* disable LGO_U1/U2 by default */ mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL, - SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE | SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE); + /* enable accept LGO_U1/U2 link command from host */ + mtu3_setbits(mbase, U3D_LINK_POWER_CONTROL, + SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE); /* device responses to u3_exit from host automatically */ mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN); /* automatically build U2 link when U3 detect fail */ mtu3_setbits(mbase, U3D_USB2_TEST_MODE, U2U3_AUTO_SWITCH); + /* auto clear SOFT_CONN when clear USB3_EN if work as HS */ + mtu3_setbits(mbase, U3D_U3U2_SWITCH_CTRL, SOFTCON_CLR_AUTO_EN); } mtu3_set_speed(mtu); @@ -592,10 +596,10 @@ static void mtu3_regs_init(struct mtu3 *mtu) mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK); /* U2/U3 detected by HW */ mtu3_writel(mbase, U3D_DEVICE_CONF, 0); - /* enable QMU 16B checksum */ - mtu3_setbits(mbase, U3D_QCR0, QMU_CS16B_EN); /* vbus detected by HW */ mtu3_clrbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON); + /* enable automatical HWRW from L1 */ + mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, LPM_HRWE); } static irqreturn_t mtu3_link_isr(struct mtu3 *mtu) @@ -708,12 +712,6 @@ static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu) if (u2comm & RESET_INTR) mtu3_gadget_reset(mtu); - if (u2comm & LPM_RESUME_INTR) { - if (!(mtu3_readl(mbase, U3D_POWER_MANAGEMENT) & LPM_HRWE)) - mtu3_setbits(mbase, U3D_USB20_MISC_CONTROL, - LPM_U3_ACK_EN); - } - return IRQ_HANDLED; } diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c index 25216e79cd6e..7cb7ac980446 100644 --- a/drivers/usb/mtu3/mtu3_gadget_ep0.c +++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c @@ -336,9 +336,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu, lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); if (set) - lpc |= SW_U1_ACCEPT_ENABLE; + lpc |= SW_U1_REQUEST_ENABLE; else - lpc &= ~SW_U1_ACCEPT_ENABLE; + lpc &= ~SW_U1_REQUEST_ENABLE; mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); mtu->u1_enable = !!set; @@ -351,9 +351,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu, lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); if (set) - lpc |= SW_U2_ACCEPT_ENABLE; + lpc |= SW_U2_REQUEST_ENABLE; else - lpc &= ~SW_U2_ACCEPT_ENABLE; + lpc &= ~SW_U2_REQUEST_ENABLE; mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); mtu->u2_enable = !!set; @@ -692,9 +692,13 @@ irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu) mtu3_writel(mbase, U3D_EPISR, int_status); /* W1C */ /* only handle ep0's */ - if (!(int_status & EP0ISR)) + if (!(int_status & (EP0ISR | SETUPENDISR))) return IRQ_NONE; + /* abort current SETUP, and process new one */ + if (int_status & SETUPENDISR) + mtu->ep0_state = MU3D_EP0_STATE_SETUP; + csr = mtu3_readl(mbase, U3D_EP0CSR); dev_dbg(mtu->dev, "%s csr=0x%x\n", __func__, csr); diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h index a45bb253939f..1d65b7476f23 100644 --- a/drivers/usb/mtu3/mtu3_hw_regs.h +++ b/drivers/usb/mtu3/mtu3_hw_regs.h @@ -104,6 +104,7 @@ /* U3D_EPISR */ #define EPRISR(x) (BIT(16) << (x)) +#define SETUPENDISR BIT(16) #define EPTISR(x) (BIT(0) << (x)) #define EP0ISR BIT(0) @@ -267,6 +268,8 @@ #define U3D_LTSSM_INTR_ENABLE (SSUSB_USB3_MAC_CSR_BASE + 0x013C) #define U3D_LTSSM_INTR (SSUSB_USB3_MAC_CSR_BASE + 0x0140) +#define U3D_U3U2_SWITCH_CTRL (SSUSB_USB3_MAC_CSR_BASE + 0x0170) + /*---------------- SSUSB_USB3_MAC_CSR FIELD DEFINITION ----------------*/ /* U3D_LTSSM_CTRL */ @@ -301,6 +304,9 @@ #define SS_DISABLE_INTR BIT(1) #define SS_INACTIVE_INTR BIT(0) +/* U3D_U3U2_SWITCH_CTRL */ +#define SOFTCON_CLR_AUTO_EN BIT(0) + /*---------------- SSUSB_USB3_SYS_CSR REGISTER DEFINITION ----------------*/ #define U3D_LINK_UX_INACT_TIMER (SSUSB_USB3_SYS_CSR_BASE + 0x020C) diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index 46551f6d16fd..e086630e41a9 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -200,6 +200,14 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb) mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); udelay(1); mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); + + /* + * device ip may be powered on in firmware/BROM stage before entering + * kernel stage; + * power down device ip, otherwise ip-sleep will fail when working as + * host only mode + */ + mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); } /* ignore the error if the clock does not exist */ diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c index ff62ba232177..09f19f70fe8f 100644 --- a/drivers/usb/mtu3/mtu3_qmu.c +++ b/drivers/usb/mtu3/mtu3_qmu.c @@ -154,27 +154,6 @@ void mtu3_gpd_ring_free(struct mtu3_ep *mep) memset(ring, 0, sizeof(*ring)); } -/* - * calculate check sum of a gpd or bd - * add "noinline" and "mb" to prevent wrong calculation - */ -static noinline u8 qmu_calc_checksum(u8 *data) -{ - u8 chksum = 0; - int i; - - data[1] = 0x0; /* set checksum to 0 */ - - mb(); /* ensure the gpd/bd is really up-to-date */ - for (i = 0; i < QMU_CHECKSUM_LEN; i++) - chksum += data[i]; - - /* Default: HWO=1, @flag[bit0] */ - chksum += 1; - - return 0xFF - chksum; -} - void mtu3_qmu_resume(struct mtu3_ep *mep) { struct mtu3 *mtu = mep->mtu; @@ -260,7 +239,6 @@ static int mtu3_prepare_tx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq) if (req->zero) gpd->ext_flag |= GPD_EXT_FLAG_ZLP; - gpd->chksum = qmu_calc_checksum((u8 *)gpd); gpd->flag |= GPD_FLAGS_HWO; mreq->gpd = gpd; @@ -295,7 +273,6 @@ static int mtu3_prepare_rx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq) gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma)); ext_addr |= GPD_EXT_NGP(upper_32_bits(enq_dma)); gpd->rx_ext_addr = cpu_to_le16(ext_addr); - gpd->chksum = qmu_calc_checksum((u8 *)gpd); gpd->flag |= GPD_FLAGS_HWO; mreq->gpd = gpd; @@ -323,7 +300,6 @@ int mtu3_qmu_start(struct mtu3_ep *mep) /* set QMU start address */ write_txq_start_addr(mbase, epnum, ring->dma); mtu3_setbits(mbase, MU3D_EP_TXCR0(epnum), TX_DMAREQEN); - mtu3_setbits(mbase, U3D_QCR0, QMU_TX_CS_EN(epnum)); /* send zero length packet according to ZLP flag in GPD */ mtu3_setbits(mbase, U3D_QCR1, QMU_TX_ZLP(epnum)); mtu3_writel(mbase, U3D_TQERRIESR0, @@ -338,7 +314,6 @@ int mtu3_qmu_start(struct mtu3_ep *mep) } else { write_rxq_start_addr(mbase, epnum, ring->dma); mtu3_setbits(mbase, MU3D_EP_RXCR0(epnum), RX_DMAREQEN); - mtu3_setbits(mbase, U3D_QCR0, QMU_RX_CS_EN(epnum)); /* don't expect ZLP */ mtu3_clrbits(mbase, U3D_QCR3, QMU_RX_ZLP(epnum)); /* move to next GPD when receive ZLP */ @@ -427,7 +402,7 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum) return; } - dev_dbg(mtu->dev, "%s send ZLP for req=%p\n", __func__, mreq); + dev_dbg(mtu->dev, "%s send ZLP for req=%p\n", __func__, req); mtu3_clrbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_DMAREQEN); @@ -441,7 +416,6 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum) /* by pass the current GDP */ gpd_current->flag |= GPD_FLAGS_BPS; - gpd_current->chksum = qmu_calc_checksum((u8 *)gpd_current); gpd_current->flag |= GPD_FLAGS_HWO; /*enable DMAREQEN, switch back to QMU mode */ diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 23a0df79ef21..403eb97915f8 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -181,9 +181,11 @@ static void dsps_musb_enable(struct musb *musb) musb_writel(reg_base, wrp->epintr_set, epmask); musb_writel(reg_base, wrp->coreintr_set, coremask); - /* start polling for ID change in dual-role idle mode */ - if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && - musb->port_mode == MUSB_OTG) + /* + * start polling for runtime PM active and idle, + * and for ID change in dual-role idle mode. + */ + if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) dsps_mod_timer(glue, -1); } @@ -227,8 +229,13 @@ static int dsps_check_status(struct musb *musb, void *unused) switch (musb->xceiv->otg->state) { case OTG_STATE_A_WAIT_VRISE: - dsps_mod_timer_optional(glue); - break; + if (musb->port_mode == MUSB_HOST) { + musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; + dsps_mod_timer_optional(glue); + break; + } + /* fall through */ + case OTG_STATE_A_WAIT_BCON: /* keep VBUS on for host-only mode */ if (musb->port_mode == MUSB_HOST) { @@ -249,6 +256,10 @@ static int dsps_check_status(struct musb *musb, void *unused) musb->xceiv->otg->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); } + + if (musb->port_mode == MUSB_PERIPHERAL) + skip_session = 1; + if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session) musb_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index a3e1290d682d..249fbee97f3f 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -540,6 +540,10 @@ static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) */ static const struct of_device_id usbhs_of_match[] = { { + .compatible = "renesas,usbhs-r8a774c0", + .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL, + }, + { .compatible = "renesas,usbhs-r8a7790", .data = (void *)USBHS_TYPE_RCAR_GEN2, }, @@ -841,7 +845,7 @@ static int usbhs_remove(struct platform_device *pdev) return 0; } -static int usbhsc_suspend(struct device *dev) +static __maybe_unused int usbhsc_suspend(struct device *dev) { struct usbhs_priv *priv = dev_get_drvdata(dev); struct usbhs_mod *mod = usbhs_mod_get_current(priv); @@ -857,7 +861,7 @@ static int usbhsc_suspend(struct device *dev) return 0; } -static int usbhsc_resume(struct device *dev) +static __maybe_unused int usbhsc_resume(struct device *dev) { struct usbhs_priv *priv = dev_get_drvdata(dev); struct platform_device *pdev = usbhs_priv_to_pdev(priv); @@ -874,24 +878,7 @@ static int usbhsc_resume(struct device *dev) return 0; } -static int usbhsc_runtime_nop(struct device *dev) -{ - /* Runtime PM callback shared between ->runtime_suspend() - * and ->runtime_resume(). Simply returns success. - * - * This driver re-initializes all registers after - * pm_runtime_get_sync() anyway so there is no need - * to save and restore registers here. - */ - return 0; -} - -static const struct dev_pm_ops usbhsc_pm_ops = { - .suspend = usbhsc_suspend, - .resume = usbhsc_resume, - .runtime_suspend = usbhsc_runtime_nop, - .runtime_resume = usbhsc_runtime_nop, -}; +static SIMPLE_DEV_PM_OPS(usbhsc_pm_ops, usbhsc_suspend, usbhsc_resume); static struct platform_driver renesas_usbhs_driver = { .driver = { diff --git a/drivers/usb/roles/Kconfig b/drivers/usb/roles/Kconfig index f5a5e6f79f1b..e4194ac94510 100644 --- a/drivers/usb/roles/Kconfig +++ b/drivers/usb/roles/Kconfig @@ -1,3 +1,16 @@ +config USB_ROLE_SWITCH + tristate "USB Role Switch Support" + help + USB Role Switch is a device that can select the USB role - host or + device - for a USB port (connector). In most cases dual-role capable + USB controller will also represent the switch, but on some platforms + multiplexer/demultiplexer switch is used to route the data lines on + the USB connector between separate USB host and device controllers. + + Say Y here if your USB connectors support both device and host roles. + To compile the driver as module, choose M here: the module will be + called roles.ko. + if USB_ROLE_SWITCH config USB_ROLES_INTEL_XHCI diff --git a/drivers/usb/roles/Makefile b/drivers/usb/roles/Makefile index e44b179ba275..c02873206fc1 100644 --- a/drivers/usb/roles/Makefile +++ b/drivers/usb/roles/Makefile @@ -1 +1,3 @@ -obj-$(CONFIG_USB_ROLES_INTEL_XHCI) += intel-xhci-usb-role-switch.o +obj-$(CONFIG_USB_ROLE_SWITCH) += roles.o +roles-y := class.o +obj-$(CONFIG_USB_ROLES_INTEL_XHCI) += intel-xhci-usb-role-switch.o diff --git a/drivers/usb/common/roles.c b/drivers/usb/roles/class.c index 99116af07f1d..99116af07f1d 100644 --- a/drivers/usb/common/roles.c +++ b/drivers/usb/roles/class.c diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c index 380933db34dd..2b39bda035c7 100644 --- a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534.c @@ -45,14 +45,17 @@ #define F81534_CONFIG1_REG (0x09 + F81534_UART_BASE_ADDRESS) #define F81534_DEF_CONF_ADDRESS_START 0x3000 -#define F81534_DEF_CONF_SIZE 8 +#define F81534_DEF_CONF_SIZE 12 #define F81534_CUSTOM_ADDRESS_START 0x2f00 #define F81534_CUSTOM_DATA_SIZE 0x10 #define F81534_CUSTOM_NO_CUSTOM_DATA 0xff #define F81534_CUSTOM_VALID_TOKEN 0xf0 #define F81534_CONF_OFFSET 1 -#define F81534_CONF_GPIO_OFFSET 4 +#define F81534_CONF_INIT_GPIO_OFFSET 4 +#define F81534_CONF_WORK_GPIO_OFFSET 8 +#define F81534_CONF_GPIO_SHUTDOWN 7 +#define F81534_CONF_GPIO_RS232 1 #define F81534_MAX_DATA_BLOCK 64 #define F81534_MAX_BUS_RETRY 20 @@ -1337,8 +1340,19 @@ static int f81534_set_port_output_pin(struct usb_serial_port *port) serial_priv = usb_get_serial_data(serial); port_priv = usb_get_serial_port_data(port); - idx = F81534_CONF_GPIO_OFFSET + port_priv->phy_num; + idx = F81534_CONF_INIT_GPIO_OFFSET + port_priv->phy_num; value = serial_priv->conf_data[idx]; + if (value >= F81534_CONF_GPIO_SHUTDOWN) { + /* + * Newer IC configure will make transceiver in shutdown mode on + * initial power on. We need enable it before using UARTs. + */ + idx = F81534_CONF_WORK_GPIO_OFFSET + port_priv->phy_num; + value = serial_priv->conf_data[idx]; + if (value >= F81534_CONF_GPIO_SHUTDOWN) + value = F81534_CONF_GPIO_RS232; + } + pins = &f81534_port_out_pins[port_priv->phy_num]; for (i = 0; i < ARRAY_SIZE(pins->pin); ++i) { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 609198d9594c..1ab2a6191013 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1130,7 +1130,7 @@ static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base) { unsigned short int divisor; /* divisor shifted 3 bits to the left */ - int divisor3 = base / 2 / baud; + int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud); if ((divisor3 & 0x7) == 7) divisor3++; /* round x.7/8 up to x+1 */ divisor = divisor3 >> 3; @@ -1156,7 +1156,7 @@ static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; u32 divisor; /* divisor shifted 3 bits to the left */ - int divisor3 = base / 2 / baud; + int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud); divisor = divisor3 >> 3; divisor |= (u32)divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ @@ -1179,7 +1179,7 @@ static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) int divisor3; /* hi-speed baud rate is 10-bit sampling instead of 16-bit */ - divisor3 = base * 8 / (baud * 10); + divisor3 = DIV_ROUND_CLOSEST(8 * base, 10 * baud); divisor = divisor3 >> 3; divisor |= (u32)divfrac[divisor3 & 0x7] << 14; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 88828b4b8c44..a698d46ba773 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -94,6 +94,7 @@ /* The native mos7840/7820 component */ #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7840 0x7840 +#define MOSCHIP_DEVICE_ID_7843 0x7843 #define MOSCHIP_DEVICE_ID_7820 0x7820 #define MOSCHIP_DEVICE_ID_7810 0x7810 /* The native component can have its vendor/device id's overridden @@ -176,6 +177,7 @@ enum mos7840_flag { static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, + {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7843)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)}, @@ -298,15 +300,10 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, val = val & 0x00ff; /* For the UART control registers, the application number need to be Or'ed */ - if (port->serial->num_ports == 4) { + if (port->serial->num_ports == 2 && port->port_number != 0) + val |= ((__u16)port->port_number + 2) << 8; + else val |= ((__u16)port->port_number + 1) << 8; - } else { - if (port->port_number == 0) { - val |= ((__u16)port->port_number + 1) << 8; - } else { - val |= ((__u16)port->port_number + 2) << 8; - } - } dev_dbg(&port->dev, "%s application number is %x\n", __func__, val); return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE, val, reg, NULL, 0, @@ -332,15 +329,10 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, return -ENOMEM; /* Wval is same as application number */ - if (port->serial->num_ports == 4) { + if (port->serial->num_ports == 2 && port->port_number != 0) + Wval = ((__u16)port->port_number + 2) << 8; + else Wval = ((__u16)port->port_number + 1) << 8; - } else { - if (port->port_number == 0) { - Wval = ((__u16)port->port_number + 1) << 8; - } else { - Wval = ((__u16)port->port_number + 2) << 8; - } - } dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval); ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH, @@ -601,7 +593,7 @@ static void mos7840_interrupt_callback(struct urb *urb) struct usb_serial *serial; __u16 Data; unsigned char *data; - __u8 sp[5], st; + __u8 sp[5]; int i, rv = 0; __u16 wval, wreg = 0; int status = urb->status; @@ -644,7 +636,6 @@ static void mos7840_interrupt_callback(struct urb *urb) sp[1] = (__u8) data[1]; sp[2] = (__u8) data[2]; sp[3] = (__u8) data[3]; - st = (__u8) data[4]; for (i = 0; i < serial->num_ports; i++) { mos7840_port = mos7840_get_port_private(serial->port[i]); @@ -1300,7 +1291,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, struct urb *urb; /* __u16 Data; */ const unsigned char *current_position = data; - unsigned char *data1; if (mos7840_port_paranoia_check(port, __func__)) return -1; @@ -1361,7 +1351,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, mos7840_bulk_out_data_callback, mos7840_port); } - data1 = urb->transfer_buffer; dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress); if (mos7840_port->has_led) @@ -1592,7 +1581,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, int divisor = 0; int status; __u16 Data; - unsigned char number; __u16 clk_sel_val; struct usb_serial_port *port; @@ -1606,8 +1594,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, if (mos7840_serial_paranoia_check(port->serial, __func__)) return -1; - number = mos7840_port->port->port_number; - dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate); /* reset clk_uart_sel in spregOffset */ if (baudRate > 115200) { @@ -1697,14 +1683,12 @@ static void mos7840_change_port_settings(struct tty_struct *tty, { int baud; unsigned cflag; - unsigned iflag; __u8 lData; __u8 lParity; __u8 lStop; int status; __u16 Data; struct usb_serial_port *port; - struct usb_serial *serial; if (mos7840_port == NULL) return; @@ -1717,8 +1701,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty, if (mos7840_serial_paranoia_check(port->serial, __func__)) return; - serial = port->serial; - if (!mos7840_port->open) { dev_dbg(&port->dev, "%s - port not opened\n", __func__); return; @@ -1729,7 +1711,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty, lParity = LCR_PAR_NONE; cflag = tty->termios.c_cflag; - iflag = tty->termios.c_iflag; /* Change the number of bits */ switch (cflag & CSIZE) { @@ -2043,7 +2024,8 @@ static int mos7840_probe(struct usb_serial *serial, int device_type; if (product == MOSCHIP_DEVICE_ID_7810 || - product == MOSCHIP_DEVICE_ID_7820) { + product == MOSCHIP_DEVICE_ID_7820 || + product == MOSCHIP_DEVICE_ID_7843) { device_type = product; goto out; } @@ -2077,7 +2059,10 @@ static int mos7840_calc_num_ports(struct usb_serial *serial, int device_type = (unsigned long)usb_get_serial_data(serial); int num_ports; - num_ports = (device_type >> 4) & 0x000F; + if (device_type == MOSCHIP_DEVICE_ID_7843) + num_ports = 3; + else + num_ports = (device_type >> 4) & 0x000F; /* * num_ports is currently never zero as device_type is one of @@ -2132,22 +2117,16 @@ static int mos7840_port_probe(struct usb_serial_port *port) mos7840_port->SpRegOffset = 0x0; mos7840_port->ControlRegOffset = 0x1; mos7840_port->DcrRegOffset = 0x4; - } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0x8; - mos7840_port->ControlRegOffset = 0x9; - mos7840_port->DcrRegOffset = 0x16; - } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) { - mos7840_port->SpRegOffset = 0xa; - mos7840_port->ControlRegOffset = 0xb; - mos7840_port->DcrRegOffset = 0x19; - } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0xa; - mos7840_port->ControlRegOffset = 0xb; - mos7840_port->DcrRegOffset = 0x19; - } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) { - mos7840_port->SpRegOffset = 0xc; - mos7840_port->ControlRegOffset = 0xd; - mos7840_port->DcrRegOffset = 0x1c; + } else { + u8 phy_num = mos7840_port->port_num; + + /* Port 2 in the 2-port case uses registers of port 3 */ + if (serial->num_ports == 2) + phy_num = 3; + + mos7840_port->SpRegOffset = 0x8 + 2 * (phy_num - 2); + mos7840_port->ControlRegOffset = 0x9 + 2 * (phy_num - 2); + mos7840_port->DcrRegOffset = 0x16 + 3 * (phy_num - 2); } mos7840_dump_serial_port(port, mos7840_port); mos7840_set_port_private(port, mos7840_port); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 1ce27f3ff7a7..aef15497ff31 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1955,6 +1955,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) }, { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, + { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */ + .driver_info = RSVD(4) | RSVD(5) }, + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ + .driver_info = RSVD(6) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index a4e0d13fc121..98e7a5df0f6d 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -91,9 +91,14 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) }, { USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) }, { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) }, { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 26965cc23c17..4e2554d55362 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -119,10 +119,15 @@ /* Hewlett-Packard POS Pole Displays */ #define HP_VENDOR_ID 0x03f0 +#define HP_LM920_PRODUCT_ID 0x026b +#define HP_TD620_PRODUCT_ID 0x0956 #define HP_LD960_PRODUCT_ID 0x0b39 #define HP_LCM220_PRODUCT_ID 0x3139 #define HP_LCM960_PRODUCT_ID 0x3239 #define HP_LD220_PRODUCT_ID 0x3524 +#define HP_LD220TA_PRODUCT_ID 0x4349 +#define HP_LD960TA_PRODUCT_ID 0x4439 +#define HP_LM940_PRODUCT_ID 0x5039 /* Cressi Edy (diving computer) PC interface */ #define CRESSI_VENDOR_ID 0x04b8 diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index f2fbe1ec9701..a62981ca7a73 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -500,7 +500,6 @@ static void qt2_process_read_urb(struct urb *urb) struct usb_serial *serial; struct qt2_serial_private *serial_priv; struct usb_serial_port *port; - struct qt2_port_private *port_priv; bool escapeflag; unsigned char *ch; int i; @@ -514,7 +513,6 @@ static void qt2_process_read_urb(struct urb *urb) serial = urb->context; serial_priv = usb_get_serial_data(serial); port = serial->port[serial_priv->current_port]; - port_priv = usb_get_serial_port_data(port); for (i = 0; i < urb->actual_length; i++) { ch = (unsigned char *)urb->transfer_buffer + i; @@ -566,7 +564,6 @@ static void qt2_process_read_urb(struct urb *urb) serial_priv->current_port = newport; port = serial->port[serial_priv->current_port]; - port_priv = usb_get_serial_port_data(port); i += 3; escapeflag = true; break; diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 4d261e4de9ad..c26129d5b943 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -1131,7 +1131,7 @@ static int ms_lib_alloc_writebuf(struct us_data *us) ms_lib_clear_writebuf(us); -return 0; + return 0; } static int ms_lib_force_setlogical_pair(struct us_data *us, u16 logblk, u16 phyblk) diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index 43b64d9309d0..e9344997329c 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -1765,7 +1765,7 @@ static int fusb302_probe(struct i2c_client *client, * to be set by the platform code which also registers the i2c client * for the fusb302. */ - if (device_property_read_string(dev, "fcs,extcon-name", &name) == 0) { + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { chip->extcon = extcon_get_extcon_dev(name); if (!chip->extcon) return -EPROBE_DEFER; diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index dbbd71f754d0..4bc29b586698 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -317,6 +317,9 @@ struct tcpm_port { /* Deadline in jiffies to exit src_try_wait state */ unsigned long max_wait; + /* port belongs to a self powered device */ + bool self_powered; + #ifdef CONFIG_DEBUG_FS struct dentry *dentry; struct mutex logbuffer_lock; /* log buffer access lock */ @@ -2210,7 +2213,8 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) unsigned int i, j, max_mw = 0, max_mv = 0; unsigned int min_src_mv, max_src_mv, src_ma, src_mw; unsigned int min_snk_mv, max_snk_mv; - u32 pdo; + unsigned int max_op_mv; + u32 pdo, src, snk; unsigned int src_pdo = 0, snk_pdo = 0; /* @@ -2260,16 +2264,18 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) continue; } - if (max_src_mv <= max_snk_mv && - min_src_mv >= min_snk_mv) { + if (min_src_mv <= max_snk_mv && + max_src_mv >= min_snk_mv) { + max_op_mv = min(max_src_mv, max_snk_mv); + src_mw = (max_op_mv * src_ma) / 1000; /* Prefer higher voltages if available */ if ((src_mw == max_mw && - min_src_mv > max_mv) || + max_op_mv > max_mv) || src_mw > max_mw) { src_pdo = i; snk_pdo = j; max_mw = src_mw; - max_mv = max_src_mv; + max_mv = max_op_mv; } } } @@ -2282,16 +2288,18 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) } if (src_pdo) { - pdo = port->source_caps[src_pdo]; - - port->pps_data.min_volt = pdo_pps_apdo_min_voltage(pdo); - port->pps_data.max_volt = pdo_pps_apdo_max_voltage(pdo); - port->pps_data.max_curr = - min_pps_apdo_current(pdo, port->snk_pdo[snk_pdo]); - port->pps_data.out_volt = - min(pdo_pps_apdo_max_voltage(pdo), port->pps_data.out_volt); - port->pps_data.op_curr = - min(port->pps_data.max_curr, port->pps_data.op_curr); + src = port->source_caps[src_pdo]; + snk = port->snk_pdo[snk_pdo]; + + port->pps_data.min_volt = max(pdo_pps_apdo_min_voltage(src), + pdo_pps_apdo_min_voltage(snk)); + port->pps_data.max_volt = min(pdo_pps_apdo_max_voltage(src), + pdo_pps_apdo_max_voltage(snk)); + port->pps_data.max_curr = min_pps_apdo_current(src, snk); + port->pps_data.out_volt = min(port->pps_data.max_volt, + port->pps_data.out_volt); + port->pps_data.op_curr = min(port->pps_data.max_curr, + port->pps_data.op_curr); } return src_pdo; @@ -3254,7 +3262,8 @@ static void run_state_machine(struct tcpm_port *port) case SRC_HARD_RESET_VBUS_OFF: tcpm_set_vconn(port, true); tcpm_set_vbus(port, false); - tcpm_set_roles(port, false, TYPEC_SOURCE, TYPEC_HOST); + tcpm_set_roles(port, port->self_powered, TYPEC_SOURCE, + TYPEC_HOST); tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SRC_RECOVER); break; case SRC_HARD_RESET_VBUS_ON: @@ -3266,8 +3275,10 @@ static void run_state_machine(struct tcpm_port *port) case SNK_HARD_RESET_SINK_OFF: memset(&port->pps_data, 0, sizeof(port->pps_data)); tcpm_set_vconn(port, false); - tcpm_set_charge(port, false); - tcpm_set_roles(port, false, TYPEC_SINK, TYPEC_DEVICE); + if (port->pd_capable) + tcpm_set_charge(port, false); + tcpm_set_roles(port, port->self_powered, TYPEC_SINK, + TYPEC_DEVICE); /* * VBUS may or may not toggle, depending on the adapter. * If it doesn't toggle, transition to SNK_HARD_RESET_SINK_ON @@ -3297,6 +3308,12 @@ static void run_state_machine(struct tcpm_port *port) * Similar, dual-mode ports in source mode should transition * to PE_SNK_Transition_to_default. */ + if (port->pd_capable) { + tcpm_set_current_limit(port, + tcpm_get_current_limit(port), + 5000); + tcpm_set_charge(port, true); + } tcpm_set_attached_state(port, true); tcpm_set_state(port, SNK_STARTUP, 0); break; @@ -4412,6 +4429,8 @@ sink: return -EINVAL; port->operating_snk_mw = mw / 1000; + port->self_powered = fwnode_property_read_bool(fwnode, "self-powered"); + return 0; } @@ -4720,6 +4739,7 @@ static int tcpm_copy_caps(struct tcpm_port *port, port->typec_caps.prefer_role = tcfg->default_role; port->typec_caps.type = tcfg->type; port->typec_caps.data = tcfg->data; + port->self_powered = port->tcpc->config->self_powered; return 0; } |