diff options
Diffstat (limited to 'drivers/misc/panel.c')
| -rw-r--r-- | drivers/misc/panel.c | 2439 |
1 files changed, 0 insertions, 2439 deletions
diff --git a/drivers/misc/panel.c b/drivers/misc/panel.c deleted file mode 100644 index ef2ece0f26af..000000000000 --- a/drivers/misc/panel.c +++ /dev/null @@ -1,2439 +0,0 @@ -/* - * Front panel driver for Linux - * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * This code drives an LCD module (/dev/lcd), and a keypad (/dev/keypad) - * connected to a parallel printer port. - * - * The LCD module may either be an HD44780-like 8-bit parallel LCD, or a 1-bit - * serial module compatible with Samsung's KS0074. The pins may be connected in - * any combination, everything is programmable. - * - * The keypad consists in a matrix of push buttons connecting input pins to - * data output pins or to the ground. The combinations have to be hard-coded - * in the driver, though several profiles exist and adding new ones is easy. - * - * Several profiles are provided for commonly found LCD+keypad modules on the - * market, such as those found in Nexcom's appliances. - * - * FIXME: - * - the initialization/deinitialization process is very dirty and should - * be rewritten. It may even be buggy. - * - * TODO: - * - document 24 keys keyboard (3 rows of 8 cols, 32 diodes + 2 inputs) - * - make the LCD a part of a virtual screen of Vx*Vy - * - make the inputs list smp-safe - * - change the keyboard to a double mapping : signals -> key_id -> values - * so that applications can change values without knowing signals - * - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/miscdevice.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/fcntl.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/ctype.h> -#include <linux/parport.h> -#include <linux/list.h> -#include <linux/notifier.h> -#include <linux/reboot.h> -#include <linux/workqueue.h> -#include <generated/utsrelease.h> - -#include <linux/io.h> -#include <linux/uaccess.h> - -#define LCD_MINOR 156 -#define KEYPAD_MINOR 185 - -#define LCD_MAXBYTES 256 /* max burst write */ - -#define KEYPAD_BUFFER 64 - -/* poll the keyboard this every second */ -#define INPUT_POLL_TIME (HZ / 50) -/* a key starts to repeat after this times INPUT_POLL_TIME */ -#define KEYPAD_REP_START (10) -/* a key repeats this times INPUT_POLL_TIME */ -#define KEYPAD_REP_DELAY (2) - -/* keep the light on this many seconds for each flash */ -#define FLASH_LIGHT_TEMPO (4) - -/* converts an r_str() input to an active high, bits string : 000BAOSE */ -#define PNL_PINPUT(a) ((((unsigned char)(a)) ^ 0x7F) >> 3) - -#define PNL_PBUSY 0x80 /* inverted input, active low */ -#define PNL_PACK 0x40 /* direct input, active low */ -#define PNL_POUTPA 0x20 /* direct input, active high */ -#define PNL_PSELECD 0x10 /* direct input, active high */ -#define PNL_PERRORP 0x08 /* direct input, active low */ - -#define PNL_PBIDIR 0x20 /* bi-directional ports */ -/* high to read data in or-ed with data out */ -#define PNL_PINTEN 0x10 -#define PNL_PSELECP 0x08 /* inverted output, active low */ -#define PNL_PINITP 0x04 /* direct output, active low */ -#define PNL_PAUTOLF 0x02 /* inverted output, active low */ -#define PNL_PSTROBE 0x01 /* inverted output */ - -#define PNL_PD0 0x01 -#define PNL_PD1 0x02 -#define PNL_PD2 0x04 -#define PNL_PD3 0x08 -#define PNL_PD4 0x10 -#define PNL_PD5 0x20 -#define PNL_PD6 0x40 -#define PNL_PD7 0x80 - -#define PIN_NONE 0 -#define PIN_STROBE 1 -#define PIN_D0 2 -#define PIN_D1 3 -#define PIN_D2 4 -#define PIN_D3 5 -#define PIN_D4 6 -#define PIN_D5 7 -#define PIN_D6 8 -#define PIN_D7 9 -#define PIN_AUTOLF 14 -#define PIN_INITP 16 -#define PIN_SELECP 17 -#define PIN_NOT_SET 127 - -#define LCD_FLAG_B 0x0004 /* blink on */ -#define LCD_FLAG_C 0x0008 /* cursor on */ -#define LCD_FLAG_D 0x0010 /* display on */ -#define LCD_FLAG_F 0x0020 /* large font mode */ -#define LCD_FLAG_N 0x0040 /* 2-rows mode */ -#define LCD_FLAG_L 0x0080 /* backlight enabled */ - -/* LCD commands */ -#define LCD_CMD_DISPLAY_CLEAR 0x01 /* Clear entire display */ - -#define LCD_CMD_ENTRY_MODE 0x04 /* Set entry mode */ -#define LCD_CMD_CURSOR_INC 0x02 /* Increment cursor */ - -#define LCD_CMD_DISPLAY_CTRL 0x08 /* Display control */ -#define LCD_CMD_DISPLAY_ON 0x04 /* Set display on */ -#define LCD_CMD_CURSOR_ON 0x02 /* Set cursor on */ -#define LCD_CMD_BLINK_ON 0x01 /* Set blink on */ - -#define LCD_CMD_SHIFT 0x10 /* Shift cursor/display */ -#define LCD_CMD_DISPLAY_SHIFT 0x08 /* Shift display instead of cursor */ -#define LCD_CMD_SHIFT_RIGHT 0x04 /* Shift display/cursor to the right */ - -#define LCD_CMD_FUNCTION_SET 0x20 /* Set function */ -#define LCD_CMD_DATA_LEN_8BITS 0x10 /* Set data length to 8 bits */ -#define LCD_CMD_TWO_LINES 0x08 /* Set to two display lines */ -#define LCD_CMD_FONT_5X10_DOTS 0x04 /* Set char font to 5x10 dots */ - -#define LCD_CMD_SET_CGRAM_ADDR 0x40 /* Set char generator RAM address */ - -#define LCD_CMD_SET_DDRAM_ADDR 0x80 /* Set display data RAM address */ - -#define LCD_ESCAPE_LEN 24 /* max chars for LCD escape command */ -#define LCD_ESCAPE_CHAR 27 /* use char 27 for escape command */ - -#define NOT_SET -1 - -/* macros to simplify use of the parallel port */ -#define r_ctr(x) (parport_read_control((x)->port)) -#define r_dtr(x) (parport_read_data((x)->port)) -#define r_str(x) (parport_read_status((x)->port)) -#define w_ctr(x, y) (parport_write_control((x)->port, (y))) -#define w_dtr(x, y) (parport_write_data((x)->port, (y))) - -/* this defines which bits are to be used and which ones to be ignored */ -/* logical or of the output bits involved in the scan matrix */ -static __u8 scan_mask_o; -/* logical or of the input bits involved in the scan matrix */ -static __u8 scan_mask_i; - -enum input_type { - INPUT_TYPE_STD, - INPUT_TYPE_KBD, -}; - -enum input_state { - INPUT_ST_LOW, - INPUT_ST_RISING, - INPUT_ST_HIGH, - INPUT_ST_FALLING, -}; - -struct logical_input { - struct list_head list; - __u64 mask; - __u64 value; - enum input_type type; - enum input_state state; - __u8 rise_time, fall_time; - __u8 rise_timer, fall_timer, high_timer; - - union { - struct { /* valid when type == INPUT_TYPE_STD */ - void (*press_fct)(int); - void (*release_fct)(int); - int press_data; - int release_data; - } std; - struct { /* valid when type == INPUT_TYPE_KBD */ - /* strings can be non null-terminated */ - char press_str[sizeof(void *) + sizeof(int)]; - char repeat_str[sizeof(void *) + sizeof(int)]; - char release_str[sizeof(void *) + sizeof(int)]; - } kbd; - } u; -}; - -static LIST_HEAD(logical_inputs); /* list of all defined logical inputs */ - -/* physical contacts history - * Physical contacts are a 45 bits string of 9 groups of 5 bits each. - * The 8 lower groups correspond to output bits 0 to 7, and the 9th group - * corresponds to the ground. - * Within each group, bits are stored in the same order as read on the port : - * BAPSE (busy=4, ack=3, paper empty=2, select=1, error=0). - * So, each __u64 is represented like this : - * 0000000000000000000BAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSE - * <-----unused------><gnd><d07><d06><d05><d04><d03><d02><d01><d00> - */ - -/* what has just been read from the I/O ports */ -static __u64 phys_read; -/* previous phys_read */ -static __u64 phys_read_prev; -/* stabilized phys_read (phys_read|phys_read_prev) */ -static __u64 phys_curr; -/* previous phys_curr */ -static __u64 phys_prev; -/* 0 means that at least one logical signal needs be computed */ -static char inputs_stable; - -/* these variables are specific to the keypad */ -static struct { - bool enabled; -} keypad; - -static char keypad_buffer[KEYPAD_BUFFER]; -static int keypad_buflen; -static int keypad_start; -static char keypressed; -static wait_queue_head_t keypad_read_wait; - -/* lcd-specific variables */ -static struct { - bool enabled; - bool initialized; - bool must_clear; - - int height; - int width; - int bwidth; - int hwidth; - int charset; - int proto; - - struct delayed_work bl_work; - struct mutex bl_tempo_lock; /* Protects access to bl_tempo */ - bool bl_tempo; - - /* TODO: use union here? */ - struct { - int e; - int rs; - int rw; - int cl; - int da; - int bl; - } pins; - - /* contains the LCD config state */ - unsigned long int flags; - - /* Contains the LCD X and Y offset */ - struct { - unsigned long int x; - unsigned long int y; - } addr; - - /* Current escape sequence and it's length or -1 if outside */ - struct { - char buf[LCD_ESCAPE_LEN + 1]; - int len; - } esc_seq; -} lcd; - -/* Needed only for init */ -static int selected_lcd_type = NOT_SET; - -/* - * Bit masks to convert LCD signals to parallel port outputs. - * _d_ are values for data port, _c_ are for control port. - * [0] = signal OFF, [1] = signal ON, [2] = mask - */ -#define BIT_CLR 0 -#define BIT_SET 1 -#define BIT_MSK 2 -#define BIT_STATES 3 -/* - * one entry for each bit on the LCD - */ -#define LCD_BIT_E 0 -#define LCD_BIT_RS 1 -#define LCD_BIT_RW 2 -#define LCD_BIT_BL 3 -#define LCD_BIT_CL 4 -#define LCD_BIT_DA 5 -#define LCD_BITS 6 - -/* - * each bit can be either connected to a DATA or CTRL port - */ -#define LCD_PORT_C 0 -#define LCD_PORT_D 1 -#define LCD_PORTS 2 - -static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES]; - -/* - * LCD protocols - */ -#define LCD_PROTO_PARALLEL 0 -#define LCD_PROTO_SERIAL 1 -#define LCD_PROTO_TI_DA8XX_LCD 2 - -/* - * LCD character sets - */ -#define LCD_CHARSET_NORMAL 0 -#define LCD_CHARSET_KS0074 1 - -/* - * LCD types - */ -#define LCD_TYPE_NONE 0 -#define LCD_TYPE_CUSTOM 1 -#define LCD_TYPE_OLD 2 -#define LCD_TYPE_KS0074 3 -#define LCD_TYPE_HANTRONIX 4 -#define LCD_TYPE_NEXCOM 5 - -/* - * keypad types - */ -#define KEYPAD_TYPE_NONE 0 -#define KEYPAD_TYPE_OLD 1 -#define KEYPAD_TYPE_NEW 2 -#define KEYPAD_TYPE_NEXCOM 3 - -/* - * panel profiles - */ -#define PANEL_PROFILE_CUSTOM 0 -#define PANEL_PROFILE_OLD 1 -#define PANEL_PROFILE_NEW 2 -#define PANEL_PROFILE_HANTRONIX 3 -#define PANEL_PROFILE_NEXCOM 4 -#define PANEL_PROFILE_LARGE 5 - -/* - * Construct custom config from the kernel's configuration - */ -#define DEFAULT_PARPORT 0 -#define DEFAULT_PROFILE PANEL_PROFILE_LARGE -#define DEFAULT_KEYPAD_TYPE KEYPAD_TYPE_OLD -#define DEFAULT_LCD_TYPE LCD_TYPE_OLD -#define DEFAULT_LCD_HEIGHT 2 -#define DEFAULT_LCD_WIDTH 40 -#define DEFAULT_LCD_BWIDTH 40 -#define DEFAULT_LCD_HWIDTH 64 -#define DEFAULT_LCD_CHARSET LCD_CHARSET_NORMAL -#define DEFAULT_LCD_PROTO LCD_PROTO_PARALLEL - -#define DEFAULT_LCD_PIN_E PIN_AUTOLF -#define DEFAULT_LCD_PIN_RS PIN_SELECP -#define DEFAULT_LCD_PIN_RW PIN_INITP -#define DEFAULT_LCD_PIN_SCL PIN_STROBE -#define DEFAULT_LCD_PIN_SDA PIN_D0 -#define DEFAULT_LCD_PIN_BL PIN_NOT_SET - -#ifdef CONFIG_PANEL_PARPORT -#undef DEFAULT_PARPORT -#define DEFAULT_PARPORT CONFIG_PANEL_PARPORT -#endif - -#ifdef CONFIG_PANEL_PROFILE -#undef DEFAULT_PROFILE -#define DEFAULT_PROFILE CONFIG_PANEL_PROFILE -#endif - -#if DEFAULT_PROFILE == 0 /* custom */ -#ifdef CONFIG_PANEL_KEYPAD -#undef DEFAULT_KEYPAD_TYPE -#define DEFAULT_KEYPAD_TYPE CONFIG_PANEL_KEYPAD -#endif - -#ifdef CONFIG_PANEL_LCD -#undef DEFAULT_LCD_TYPE -#define DEFAULT_LCD_TYPE CONFIG_PANEL_LCD -#endif - -#ifdef CONFIG_PANEL_LCD_HEIGHT -#undef DEFAULT_LCD_HEIGHT -#define DEFAULT_LCD_HEIGHT CONFIG_PANEL_LCD_HEIGHT -#endif - -#ifdef CONFIG_PANEL_LCD_WIDTH -#undef DEFAULT_LCD_WIDTH -#define DEFAULT_LCD_WIDTH CONFIG_PANEL_LCD_WIDTH -#endif - -#ifdef CONFIG_PANEL_LCD_BWIDTH -#undef DEFAULT_LCD_BWIDTH -#define DEFAULT_LCD_BWIDTH CONFIG_PANEL_LCD_BWIDTH -#endif - -#ifdef CONFIG_PANEL_LCD_HWIDTH -#undef DEFAULT_LCD_HWIDTH -#define DEFAULT_LCD_HWIDTH CONFIG_PANEL_LCD_HWIDTH -#endif - -#ifdef CONFIG_PANEL_LCD_CHARSET -#undef DEFAULT_LCD_CHARSET -#define DEFAULT_LCD_CHARSET CONFIG_PANEL_LCD_CHARSET -#endif - -#ifdef CONFIG_PANEL_LCD_PROTO -#undef DEFAULT_LCD_PROTO -#define DEFAULT_LCD_PROTO CONFIG_PANEL_LCD_PROTO -#endif - -#ifdef CONFIG_PANEL_LCD_PIN_E -#undef DEFAULT_LCD_PIN_E -#define DEFAULT_LCD_PIN_E CONFIG_PANEL_LCD_PIN_E -#endif - -#ifdef CONFIG_PANEL_LCD_PIN_RS -#undef DEFAULT_LCD_PIN_RS -#define DEFAULT_LCD_PIN_RS CONFIG_PANEL_LCD_PIN_RS -#endif - -#ifdef CONFIG_PANEL_LCD_PIN_RW -#undef DEFAULT_LCD_PIN_RW -#define DEFAULT_LCD_PIN_RW CONFIG_PANEL_LCD_PIN_RW -#endif - -#ifdef CONFIG_PANEL_LCD_PIN_SCL -#undef DEFAULT_LCD_PIN_SCL -#define DEFAULT_LCD_PIN_SCL CONFIG_PANEL_LCD_PIN_SCL -#endif - -#ifdef CONFIG_PANEL_LCD_PIN_SDA -#undef DEFAULT_LCD_PIN_SDA -#define DEFAULT_LCD_PIN_SDA CONFIG_PANEL_LCD_PIN_SDA -#endif - -#ifdef CONFIG_PANEL_LCD_PIN_BL -#undef DEFAULT_LCD_PIN_BL -#define DEFAULT_LCD_PIN_BL CONFIG_PANEL_LCD_PIN_BL -#endif - -#endif /* DEFAULT_PROFILE == 0 */ - -/* global variables */ - -/* Device single-open policy control */ -static atomic_t lcd_available = ATOMIC_INIT(1); -static atomic_t keypad_available = ATOMIC_INIT(1); - -static struct pardevice *pprt; - -static int keypad_initialized; - -static void (*lcd_write_cmd)(int); -static void (*lcd_write_data)(int); -static void (*lcd_clear_fast)(void); - -static DEFINE_SPINLOCK(pprt_lock); -static struct timer_list scan_timer; - -MODULE_DESCRIPTION("Generic parallel port LCD/Keypad driver"); - -static int parport = DEFAULT_PARPORT; -module_param(parport, int, 0000); -MODULE_PARM_DESC(parport, "Parallel port index (0=lpt1, 1=lpt2, ...)"); - -static int profile = DEFAULT_PROFILE; -module_param(profile, int, 0000); -MODULE_PARM_DESC(profile, - "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; " - "4=16x2 nexcom; default=40x2, old kp"); - -static int keypad_type = NOT_SET; -module_param(keypad_type, int, 0000); -MODULE_PARM_DESC(keypad_type, - "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys"); - -static int lcd_type = NOT_SET; -module_param(lcd_type, int, 0000); -MODULE_PARM_DESC(lcd_type, - "LCD type: 0=none, 1=compiled-in, 2=old, 3=serial ks0074, 4=hantronix, 5=nexcom"); - -static int lcd_height = NOT_SET; -module_param(lcd_height, int, 0000); -MODULE_PARM_DESC(lcd_height, "Number of lines on the LCD"); - -static int lcd_width = NOT_SET; -module_param(lcd_width, int, 0000); -MODULE_PARM_DESC(lcd_width, "Number of columns on the LCD"); - -static int lcd_bwidth = NOT_SET; /* internal buffer width (usually 40) */ -module_param(lcd_bwidth, int, 0000); -MODULE_PARM_DESC(lcd_bwidth, "Internal LCD line width (40)"); - -static int lcd_hwidth = NOT_SET; /* hardware buffer width (usually 64) */ -module_param(lcd_hwidth, int, 0000); -MODULE_PARM_DESC(lcd_hwidth, "LCD line hardware address (64)"); - -static int lcd_charset = NOT_SET; -module_param(lcd_charset, int, 0000); -MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074"); - -static int lcd_proto = NOT_SET; -module_param(lcd_proto, int, 0000); -MODULE_PARM_DESC(lcd_proto, - "LCD communication: 0=parallel (//), 1=serial, 2=TI LCD Interface"); - -/* - * These are the parallel port pins the LCD control signals are connected to. - * Set this to 0 if the signal is not used. Set it to its opposite value - * (negative) if the signal is negated. -MAXINT is used to indicate that the - * pin has not been explicitly specified. - * - * WARNING! no check will be performed about collisions with keypad ! - */ - -static int lcd_e_pin = PIN_NOT_SET; -module_param(lcd_e_pin, int, 0000); -MODULE_PARM_DESC(lcd_e_pin, - "# of the // port pin connected to LCD 'E' signal, with polarity (-17..17)"); - -static int lcd_rs_pin = PIN_NOT_SET; -module_param(lcd_rs_pin, int, 0000); -MODULE_PARM_DESC(lcd_rs_pin, - "# of the // port pin connected to LCD 'RS' signal, with polarity (-17..17)"); - -static int lcd_rw_pin = PIN_NOT_SET; -module_param(lcd_rw_pin, int, 0000); -MODULE_PARM_DESC(lcd_rw_pin, - "# of the // port pin connected to LCD 'RW' signal, with polarity (-17..17)"); - -static int lcd_cl_pin = PIN_NOT_SET; -module_param(lcd_cl_pin, int, 0000); -MODULE_PARM_DESC(lcd_cl_pin, - "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)"); - -static int lcd_da_pin = PIN_NOT_SET; -module_param(lcd_da_pin, int, 0000); -MODULE_PARM_DESC(lcd_da_pin, - "# of the // port pin connected to serial LCD 'SDA' signal, with polarity (-17..17)"); - -static int lcd_bl_pin = PIN_NOT_SET; -module_param(lcd_bl_pin, int, 0000); -MODULE_PARM_DESC(lcd_bl_pin, - "# of the // port pin connected to LCD backlight, with polarity (-17..17)"); - -/* Deprecated module parameters - consider not using them anymore */ - -static int lcd_enabled = NOT_SET; -module_param(lcd_enabled, int, 0000); -MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead"); - -static int keypad_enabled = NOT_SET; -module_param(keypad_enabled, int, 0000); -MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead"); - -static const unsigned char *lcd_char_conv; - -/* for some LCD drivers (ks0074) we need a charset conversion table. */ -static const unsigned char lcd_char_conv_ks0074[256] = { - /* 0|8 1|9 2|A 3|B 4|C 5|D 6|E 7|F */ - /* 0x00 */ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - /* 0x08 */ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, - /* 0x10 */ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - /* 0x18 */ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, - /* 0x20 */ 0x20, 0x21, 0x22, 0x23, 0xa2, 0x25, 0x26, 0x27, - /* 0x28 */ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, - /* 0x30 */ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, - /* 0x38 */ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - /* 0x40 */ 0xa0, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, - /* 0x48 */ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, - /* 0x50 */ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, - /* 0x58 */ 0x58, 0x59, 0x5a, 0xfa, 0xfb, 0xfc, 0x1d, 0xc4, - /* 0x60 */ 0x96, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, - /* 0x68 */ 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, - /* 0x70 */ 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, - /* 0x78 */ 0x78, 0x79, 0x7a, 0xfd, 0xfe, 0xff, 0xce, 0x20, - /* 0x80 */ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, - /* 0x88 */ 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, - /* 0x90 */ 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, - /* 0x98 */ 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f, - /* 0xA0 */ 0x20, 0x40, 0xb1, 0xa1, 0x24, 0xa3, 0xfe, 0x5f, - /* 0xA8 */ 0x22, 0xc8, 0x61, 0x14, 0x97, 0x2d, 0xad, 0x96, - /* 0xB0 */ 0x80, 0x8c, 0x82, 0x83, 0x27, 0x8f, 0x86, 0xdd, - /* 0xB8 */ 0x2c, 0x81, 0x6f, 0x15, 0x8b, 0x8a, 0x84, 0x60, - /* 0xC0 */ 0xe2, 0xe2, 0xe2, 0x5b, 0x5b, 0xae, 0xbc, 0xa9, - /* 0xC8 */ 0xc5, 0xbf, 0xc6, 0xf1, 0xe3, 0xe3, 0xe3, 0xe3, - /* 0xD0 */ 0x44, 0x5d, 0xa8, 0xe4, 0xec, 0xec, 0x5c, 0x78, - /* 0xD8 */ 0xab, 0xa6, 0xe5, 0x5e, 0x5e, 0xe6, 0xaa, 0xbe, - /* 0xE0 */ 0x7f, 0xe7, 0xaf, 0x7b, 0x7b, 0xaf, 0xbd, 0xc8, - /* 0xE8 */ 0xa4, 0xa5, 0xc7, 0xf6, 0xa7, 0xe8, 0x69, 0x69, - /* 0xF0 */ 0xed, 0x7d, 0xa8, 0xe4, 0xec, 0x5c, 0x5c, 0x25, - /* 0xF8 */ 0xac, 0xa6, 0xea, 0xef, 0x7e, 0xeb, 0xb2, 0x79, -}; - -static const char old_keypad_profile[][4][9] = { - {"S0", "Left\n", "Left\n", ""}, - {"S1", "Down\n", "Down\n", ""}, - {"S2", "Up\n", "Up\n", ""}, - {"S3", "Right\n", "Right\n", ""}, - {"S4", "Esc\n", "Esc\n", ""}, - {"S5", "Ret\n", "Ret\n", ""}, - {"", "", "", ""} -}; - -/* signals, press, repeat, release */ -static const char new_keypad_profile[][4][9] = { - {"S0", "Left\n", "Left\n", ""}, - {"S1", "Down\n", "Down\n", ""}, - {"S2", "Up\n", "Up\n", ""}, - {"S3", "Right\n", "Right\n", ""}, - {"S4s5", "", "Esc\n", "Esc\n"}, - {"s4S5", "", "Ret\n", "Ret\n"}, - {"S4S5", "Help\n", "", ""}, - /* add new signals above this line */ - {"", "", "", ""} -}; - -/* signals, press, repeat, release */ -static const char nexcom_keypad_profile[][4][9] = { - {"a-p-e-", "Down\n", "Down\n", ""}, - {"a-p-E-", "Ret\n", "Ret\n", ""}, - {"a-P-E-", "Esc\n", "Esc\n", ""}, - {"a-P-e-", "Up\n", "Up\n", ""}, - /* add new signals above this line */ - {"", "", "", ""} -}; - -static const char (*keypad_profile)[4][9] = old_keypad_profile; - -static DECLARE_BITMAP(bits, LCD_BITS); - -static void lcd_get_bits(unsigned int port, int *val) -{ - unsigned int bit, state; - - for (bit = 0; bit < LCD_BITS; bit++) { - state = test_bit(bit, bits) ? BIT_SET : BIT_CLR; - *val &= lcd_bits[port][bit][BIT_MSK]; - *val |= lcd_bits[port][bit][state]; - } -} - -/* sets data port bits according to current signals values */ -static int set_data_bits(void) -{ - int val; - - val = r_dtr(pprt); - lcd_get_bits(LCD_PORT_D, &val); - w_dtr(pprt, val); - return val; -} - -/* sets ctrl port bits according to current signals values */ -static int set_ctrl_bits(void) -{ - int val; - - val = r_ctr(pprt); - lcd_get_bits(LCD_PORT_C, &val); - w_ctr(pprt, val); - return val; -} - -/* sets ctrl & data port bits according to current signals values */ -static void panel_set_bits(void) -{ - set_data_bits(); - set_ctrl_bits(); -} - -/* - * Converts a parallel port pin (from -25 to 25) to data and control ports - * masks, and data and control port bits. The signal will be considered - * unconnected if it's on pin 0 or an invalid pin (<-25 or >25). - * - * Result will be used this way : - * out(dport, in(dport) & d_val[2] | d_val[signal_state]) - * out(cport, in(cport) & c_val[2] | c_val[signal_state]) - */ -static void pin_to_bits(int pin, unsigned char *d_val, unsigned char *c_val) -{ - int d_bit, c_bit, inv; - - d_val[0] = 0; - c_val[0] = 0; - d_val[1] = 0; - c_val[1] = 0; - d_val[2] = 0xFF; - c_val[2] = 0xFF; - - if (pin == 0) - return; - - inv = (pin < 0); - if (inv) - pin = -pin; - - d_bit = 0; - c_bit = 0; - - switch (pin) { - case PIN_STROBE: /* strobe, inverted */ - c_bit = PNL_PSTROBE; - inv = !inv; - break; - case PIN_D0...PIN_D7: /* D0 - D7 = 2 - 9 */ - d_bit = 1 << (pin - 2); - break; - case PIN_AUTOLF: /* autofeed, inverted */ - c_bit = PNL_PAUTOLF; - inv = !inv; - break; - case PIN_INITP: /* init, direct */ - c_bit = PNL_PINITP; - break; - case PIN_SELECP: /* select_in, inverted */ - c_bit = PNL_PSELECP; - inv = !inv; - break; - default: /* unknown pin, ignore */ - break; - } - - if (c_bit) { - c_val[2] &= ~c_bit; - c_val[!inv] = c_bit; - } else if (d_bit) { - d_val[2] &= ~d_bit; - d_val[!inv] = d_bit; - } -} - -/* sleeps that many milliseconds with a reschedule */ -static void long_sleep(int ms) -{ - if (in_interrupt()) - mdelay(ms); - else - schedule_timeout_interruptible(msecs_to_jiffies(ms)); -} - -/* - * send a serial byte to the LCD panel. The caller is responsible for locking - * if needed. - */ -static void lcd_send_serial(int byte) -{ - int bit; - - /* - * the data bit is set on D0, and the clock on STROBE. - * LCD reads D0 on STROBE's rising edge. - */ - for (bit = 0; bit < 8; bit++) { - clear_bit(LCD_BIT_CL, bits); /* CLK low */ - panel_set_bits(); - if (byte & 1) { - set_bit(LCD_BIT_DA, bits); - } else { - clear_bit(LCD_BIT_DA, bits); - } - - panel_set_bits(); - udelay(2); /* maintain the data during 2 us before CLK up */ - set_bit(LCD_BIT_CL, bits); /* CLK high */ - panel_set_bits(); - udelay(1); /* maintain the strobe during 1 us */ - byte >>= 1; - } -} - -/* turn the backlight on or off */ -static void __lcd_backlight(int on) -{ - /* The backlight is activated by setting the AUTOFEED line to +5V */ - spin_lock_irq(&pprt_lock); - if (on) - set_bit(LCD_BIT_BL, bits); - else - clear_bit(LCD_BIT_BL, bits); - panel_set_bits(); - spin_unlock_irq(&pprt_lock); -} - -static void lcd_backlight(int on) -{ - if (lcd.pins.bl == PIN_NONE) - return; - - mutex_lock(&lcd.bl_tempo_lock); - if (!lcd.bl_tempo) - __lcd_backlight(on); - mutex_unlock(&lcd.bl_tempo_lock); -} - -static void lcd_bl_off(struct work_struct *work) -{ - mutex_lock(&lcd.bl_tempo_lock); - if (lcd.bl_tempo) { - lcd.bl_tempo = false; - if (!(lcd.flags & LCD_FLAG_L)) - __lcd_backlight(0); - } - mutex_unlock(&lcd.bl_tempo_lock); -} - -/* turn the backlight on for a little while */ -static void lcd_poke(void) -{ - if (lcd.pins.bl == PIN_NONE) - return; - - cancel_delayed_work_sync(&lcd.bl_work); - - mutex_lock(&lcd.bl_tempo_lock); - if (!lcd.bl_tempo && !(lcd.flags & LCD_FLAG_L)) - __lcd_backlight(1); - lcd.bl_tempo = true; - schedule_delayed_work(&lcd.bl_work, FLASH_LIGHT_TEMPO * HZ); - mutex_unlock(&lcd.bl_tempo_lock); -} - -/* send a command to the LCD panel in serial mode */ -static void lcd_write_cmd_s(int cmd) -{ - spin_lock_irq(&pprt_lock); - lcd_send_serial(0x1F); /* R/W=W, RS=0 */ - lcd_send_serial(cmd & 0x0F); - lcd_send_serial((cmd >> 4) & 0x0F); - udelay(40); /* the shortest command takes at least 40 us */ - spin_unlock_irq(&pprt_lock); -} - -/* send data to the LCD panel in serial mode */ -static void lcd_write_data_s(int data) -{ - spin_lock_irq(&pprt_lock); - lcd_send_serial(0x5F); /* R/W=W, RS=1 */ - lcd_send_serial(data & 0x0F); - lcd_send_serial((data >> 4) & 0x0F); - udelay(40); /* the shortest data takes at least 40 us */ - spin_unlock_irq(&pprt_lock); -} - -/* send a command to the LCD panel in 8 bits parallel mode */ -static void lcd_write_cmd_p8(int cmd) -{ - spin_lock_irq(&pprt_lock); - /* present the data to the data port */ - w_dtr(pprt, cmd); - udelay(20); /* maintain the data during 20 us before the strobe */ - - set_bit(LCD_BIT_E, bits); - clear_bit(LCD_BIT_RS, bits); - clear_bit(LCD_BIT_RW, bits); - set_ctrl_bits(); - - udelay(40); /* maintain the strobe during 40 us */ - - clear_bit(LCD_BIT_E, bits); - set_ctrl_bits(); - - udelay(120); /* the shortest command takes at least 120 us */ - spin_unlock_irq(&pprt_lock); -} - -/* send data to the LCD panel in 8 bits parallel mode */ -static void lcd_write_data_p8(int data) -{ - spin_lock_irq(&pprt_lock); - /* present the data to the data port */ - w_dtr(pprt, data); - udelay(20); /* maintain the data during 20 us before the strobe */ - - set_bit(LCD_BIT_E, bits); - set_bit(LCD_BIT_RS, bits); - clear_bit(LCD_BIT_RW, bits); - set_ctrl_bits(); - - udelay(40); /* maintain the strobe during 40 us */ - - clear_bit(LCD_BIT_E, bits); - set_ctrl_bits(); - - udelay(45); /* the shortest data takes at least 45 us */ - spin_unlock_irq(&pprt_lock); -} - -/* send a command to the TI LCD panel */ -static void lcd_write_cmd_tilcd(int cmd) -{ - spin_lock_irq(&pprt_lock); - /* present the data to the control port */ - w_ctr(pprt, cmd); - udelay(60); - spin_unlock_irq(&pprt_lock); -} - -/* send data to the TI LCD panel */ -static void lcd_write_data_tilcd(int data) -{ - spin_lock_irq(&pprt_lock); - /* present the data to the data port */ - w_dtr(pprt, data); - udelay(60); - spin_unlock_irq(&pprt_lock); -} - -static void lcd_gotoxy(void) -{ - lcd_write_cmd(LCD_CMD_SET_DDRAM_ADDR - | (lcd.addr.y ? lcd.hwidth : 0) - /* - * we force the cursor to stay at the end of the - * line if it wants to go farther - */ - | ((lcd.addr.x < lcd.bwidth) ? lcd.addr.x & - (lcd.hwidth - 1) : lcd.bwidth - 1)); -} - -static void lcd_home(void) -{ - lcd.addr.x = 0; - lcd.addr.y = 0; - lcd_gotoxy(); -} - -static void lcd_print(char c) -{ - if (lcd.addr.x < lcd.bwidth) { - if (lcd_char_conv) - c = lcd_char_conv[(unsigned char)c]; - lcd_write_data(c); - lcd.addr.x++; - } - /* prevents the cursor from wrapping onto the next line */ - if (lcd.addr.x == lcd.bwidth) - lcd_gotoxy(); -} - -/* fills the display with spaces and resets X/Y */ -static void lcd_clear_fast_s(void) -{ - int pos; - - lcd_home(); - - spin_lock_irq(&pprt_lock); - for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) { - lcd_send_serial(0x5F); /* R/W=W, RS=1 */ - lcd_send_serial(' ' & 0x0F); - lcd_send_serial((' ' >> 4) & 0x0F); - /* the shortest data takes at least 40 us */ - udelay(40); - } - spin_unlock_irq(&pprt_lock); - - lcd_home(); -} - -/* fills the display with spaces and resets X/Y */ -static void lcd_clear_fast_p8(void) -{ - int pos; - - lcd_home(); - - spin_lock_irq(&pprt_lock); - for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) { - /* present the data to the data port */ - w_dtr(pprt, ' '); - - /* maintain the data during 20 us before the strobe */ - udelay(20); - - set_bit(LCD_BIT_E, bits); - set_bit(LCD_BIT_RS, bits); - clear_bit(LCD_BIT_RW, bits); - set_ctrl_bits(); - - /* maintain the strobe during 40 us */ - udelay(40); - - clear_bit(LCD_BIT_E, bits); - set_ctrl_bits(); - - /* the shortest data takes at least 45 us */ - udelay(45); - } - spin_unlock_irq(&pprt_lock); - - lcd_home(); -} - -/* fills the display with spaces and resets X/Y */ -static void lcd_clear_fast_tilcd(void) -{ - int pos; - - lcd_home(); - - spin_lock_irq(&pprt_lock); - for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) { - /* present the data to the data port */ - w_dtr(pprt, ' '); - udelay(60); - } - - spin_unlock_irq(&pprt_lock); - - lcd_home(); -} - -/* clears the display and resets X/Y */ -static void lcd_clear_display(void) -{ - lcd_write_cmd(LCD_CMD_DISPLAY_CLEAR); - lcd.addr.x = 0; - lcd.addr.y = 0; - /* we must wait a few milliseconds (15) */ - long_sleep(15); -} - -static void lcd_init_display(void) -{ - lcd.flags = ((lcd.height > 1) ? LCD_FLAG_N : 0) - | LCD_FLAG_D | LCD_FLAG_C | LCD_FLAG_B; - - long_sleep(20); /* wait 20 ms after power-up for the paranoid */ - - /* 8bits, 1 line, small fonts; let's do it 3 times */ - lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS); - long_sleep(10); - lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS); - long_sleep(10); - lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS); - long_sleep(10); - - /* set font height and lines number */ - lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS - | ((lcd.flags & LCD_FLAG_F) ? LCD_CMD_FONT_5X10_DOTS : 0) - | ((lcd.flags & LCD_FLAG_N) ? LCD_CMD_TWO_LINES : 0) - ); - long_sleep(10); - - /* display off, cursor off, blink off */ - lcd_write_cmd(LCD_CMD_DISPLAY_CTRL); - long_sleep(10); - - lcd_write_cmd(LCD_CMD_DISPLAY_CTRL /* set display mode */ - | ((lcd.flags & LCD_FLAG_D) ? LCD_CMD_DISPLAY_ON : 0) - | ((lcd.flags & LCD_FLAG_C) ? LCD_CMD_CURSOR_ON : 0) - | ((lcd.flags & LCD_FLAG_B) ? LCD_CMD_BLINK_ON : 0) - ); - - lcd_backlight((lcd.flags & LCD_FLAG_L) ? 1 : 0); - - long_sleep(10); - - /* entry mode set : increment, cursor shifting */ - lcd_write_cmd(LCD_CMD_ENTRY_MODE | LCD_CMD_CURSOR_INC); - - lcd_clear_display(); -} - -/* - * These are the file operation function for user access to /dev/lcd - * This function can also be called from inside the kernel, by - * setting file and ppos to NULL. - * - */ - -static inline int handle_lcd_special_code(void) -{ - /* LCD special codes */ - - int processed = 0; - - char *esc = lcd.esc_seq.buf + 2; - int oldflags = lcd.flags; - - /* check for display mode flags */ - switch (*esc) { - case 'D': /* Display ON */ - lcd.flags |= LCD_FLAG_D; - processed = 1; - break; - case 'd': /* Display OFF */ - lcd.flags &= ~LCD_FLAG_D; - processed = 1; - break; - case 'C': /* Cursor ON */ - lcd.flags |= LCD_FLAG_C; - processed = 1; - break; - case 'c': /* Cursor OFF */ - lcd.flags &= ~LCD_FLAG_C; - processed = 1; - break; - case 'B': /* Blink ON */ - lcd.flags |= LCD_FLAG_B; - processed = 1; - break; - case 'b': /* Blink OFF */ - lcd.flags &= ~LCD_FLAG_B; - processed = 1; - break; - case '+': /* Back light ON */ - lcd.flags |= LCD_FLAG_L; - processed = 1; - break; - case '-': /* Back light OFF */ - lcd.flags &= ~LCD_FLAG_L; - processed = 1; - break; - case '*': - /* flash back light */ - lcd_poke(); - processed = 1; - break; - case 'f': /* Small Font */ - lcd.flags &= ~LCD_FLAG_F; - processed = 1; - break; - case 'F': /* Large Font */ - lcd.flags |= LCD_FLAG_F; - processed = 1; - break; - case 'n': /* One Line */ - lcd.flags &= ~LCD_FLAG_N; - processed = 1; - break; - case 'N': /* Two Lines */ - lcd.flags |= LCD_FLAG_N; - break; - case 'l': /* Shift Cursor Left */ - if (lcd.addr.x > 0) { - /* back one char if not at end of line */ - if (lcd.addr.x < lcd.bwidth) - lcd_write_cmd(LCD_CMD_SHIFT); - lcd.addr.x--; - } - processed = 1; - break; - case 'r': /* shift cursor right */ - if (lcd.addr.x < lcd.width) { - /* allow the cursor to pass the end of the line */ - if (lcd.addr.x < (lcd.bwidth - 1)) - lcd_write_cmd(LCD_CMD_SHIFT | - LCD_CMD_SHIFT_RIGHT); - lcd.addr.x++; - } - processed = 1; - break; - case 'L': /* shift display left */ - lcd_write_cmd(LCD_CMD_SHIFT | LCD_CMD_DISPLAY_SHIFT); - processed = 1; - break; - case 'R': /* shift display right */ - lcd_write_cmd(LCD_CMD_SHIFT | LCD_CMD_DISPLAY_SHIFT | - LCD_CMD_SHIFT_RIGHT); - processed = 1; - break; - case 'k': { /* kill end of line */ - int x; - - for (x = lcd.addr.x; x < lcd.bwidth; x++) - lcd_write_data(' '); - - /* restore cursor position */ - lcd_gotoxy(); - processed = 1; - break; - } - case 'I': /* reinitialize display */ - lcd_init_display(); - processed = 1; - break; - case 'G': { - /* Generator : LGcxxxxx...xx; must have <c> between '0' - * and '7', representing the numerical ASCII code of the - * redefined character, and <xx...xx> a sequence of 16 - * hex digits representing 8 bytes for each character. - * Most LCDs will only use 5 lower bits of the 7 first - * bytes. - */ - - unsigned char cgbytes[8]; - unsigned char cgaddr; - int cgoffset; - int shift; - char value; - int addr; - - if (!strchr(esc, ';')) - break; - - esc++; - - cgaddr = *(esc++) - '0'; - if (cgaddr > 7) { - processed = 1; - break; - } - - cgoffset = 0; - shift = 0; - value = 0; - while (*esc && cgoffset < 8) { - shift ^= 4; - if (*esc >= '0' && *esc <= '9') { - value |= (*esc - '0') << shift; - } else if (*esc >= 'A' && *esc <= 'Z') { - value |= (*esc - 'A' + 10) << shift; - } else if (*esc >= 'a' && *esc <= 'z') { - value |= (*esc - 'a' + 10) << shift; - } else { - esc++; - continue; - } - - if (shift == 0) { - cgbytes[cgoffset++] = value; - value = 0; - } - - esc++; - } - - lcd_write_cmd(LCD_CMD_SET_CGRAM_ADDR | (cgaddr * 8)); - for (addr = 0; addr < cgoffset; addr++) - lcd_write_data(cgbytes[addr]); - - /* ensures that we stop writing to CGRAM */ - lcd_gotoxy(); - processed = 1; - break; - } - case 'x': /* gotoxy : LxXXX[yYYY]; */ - case 'y': /* gotoxy : LyYYY[xXXX]; */ - if (!strchr(esc, ';')) - break; - - while (*esc) { - if (*esc == 'x') { - esc++; - if (kstrtoul(esc, 10, &lcd.addr.x) < 0) - break; - } else if (*esc == 'y') { - esc++; - if (kstrtoul(esc, 10, &lcd.addr.y) < 0) - break; - } else { - break; - } - } - - lcd_gotoxy(); - processed = 1; - break; - } - - /* TODO: This indent party here got ugly, clean it! */ - /* Check whether one flag was changed */ - if (oldflags != lcd.flags) { - /* check whether one of B,C,D flags were changed */ - if ((oldflags ^ lcd.flags) & - (LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D)) - /* set display mode */ - lcd_write_cmd(LCD_CMD_DISPLAY_CTRL - | ((lcd.flags & LCD_FLAG_D) - ? LCD_CMD_DISPLAY_ON : 0) - | ((lcd.flags & LCD_FLAG_C) - ? LCD_CMD_CURSOR_ON : 0) - | ((lcd.flags & LCD_FLAG_B) - ? LCD_CMD_BLINK_ON : 0)); - /* check whether one of F,N flags was changed */ - else if ((oldflags ^ lcd.flags) & (LCD_FLAG_F | LCD_FLAG_N)) - lcd_write_cmd(LCD_CMD_FUNCTION_SET - | LCD_CMD_DATA_LEN_8BITS - | ((lcd.flags & LCD_FLAG_F) - ? LCD_CMD_FONT_5X10_DOTS - : 0) - | ((lcd.flags & LCD_FLAG_N) - ? LCD_CMD_TWO_LINES - : 0)); - /* check whether L flag was changed */ - else if ((oldflags ^ lcd.flags) & (LCD_FLAG_L)) - lcd_backlight(!!(lcd.flags & LCD_FLAG_L)); - } - - return processed; -} - -static void lcd_write_char(char c) -{ - /* first, we'll test if we're in escape mode */ - if ((c != '\n') && lcd.esc_seq.len >= 0) { - /* yes, let's add this char to the buffer */ - lcd.esc_seq.buf[lcd.esc_seq.len++] = c; - lcd.esc_seq.buf[lcd.esc_seq.len] = 0; - } else { - /* aborts any previous escape sequence */ - lcd.esc_seq.len = -1; - - switch (c) { - case LCD_ESCAPE_CHAR: - /* start of an escape sequence */ - lcd.esc_seq.len = 0; - lcd.esc_seq.buf[lcd.esc_seq.len] = 0; - break; - case '\b': - /* go back one char and clear it */ - if (lcd.addr.x > 0) { - /* - * check if we're not at the - * end of the line - */ - if (lcd.addr.x < lcd.bwidth) - /* back one char */ - lcd_write_cmd(LCD_CMD_SHIFT); - lcd.addr.x--; - } - /* replace with a space */ - lcd_write_data(' '); - /* back one char again */ - lcd_write_cmd(LCD_CMD_SHIFT); - break; - case '\014': - /* quickly clear the display */ - lcd_clear_fast(); - break; - case '\n': - /* - * flush the remainder of the current line and - * go to the beginning of the next line - */ - for (; lcd.addr.x < lcd.bwidth; lcd.addr.x++) - lcd_write_data(' '); - lcd.addr.x = 0; - lcd.addr.y = (lcd.addr.y + 1) % lcd.height; - lcd_gotoxy(); - break; - case '\r': - /* go to the beginning of the same line */ - lcd.addr.x = 0; - lcd_gotoxy(); - break; - case '\t': - /* print a space instead of the tab */ - lcd_print(' '); - break; - default: - /* simply print this char */ - lcd_print(c); - break; - } - } - - /* - * now we'll see if we're in an escape mode and if the current - * escape sequence can be understood. - */ - if (lcd.esc_seq.len >= 2) { - int processed = 0; - - if (!strcmp(lcd.esc_seq.buf, "[2J")) { - /* clear the display */ - lcd_clear_fast(); - processed = 1; - } else if (!strcmp(lcd.esc_seq.buf, "[H")) { - /* cursor to home */ - lcd_home(); - processed = 1; - } - /* codes starting with ^[[L */ - else if ((lcd.esc_seq.len >= 3) && - (lcd.esc_seq.buf[0] == '[') && - (lcd.esc_seq.buf[1] == 'L')) { - processed = handle_lcd_special_code(); - } - - /* LCD special escape codes */ - /* - * flush the escape sequence if it's been processed - * or if it is getting too long. - */ - if (processed || (lcd.esc_seq.len >= LCD_ESCAPE_LEN)) - lcd.esc_seq.len = -1; - } /* escape codes */ -} - -static ssize_t lcd_write(struct file *file, - const char __user *buf, size_t count, loff_t *ppos) -{ - const char __user *tmp = buf; - char c; - - for (; count-- > 0; (*ppos)++, tmp++) { - if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) - /* - * let's be a little nice with other processes - * that need some CPU - */ - schedule(); - - if (get_user(c, tmp)) - return -EFAULT; - - lcd_write_char(c); - } - - return tmp - buf; -} - -static int lcd_open(struct inode *inode, struct file *file) -{ - if (!atomic_dec_and_test(&lcd_available)) - return -EBUSY; /* open only once at a time */ - - if (file->f_mode & FMODE_READ) /* device is write-only */ - return -EPERM; - - if (lcd.must_clear) { - lcd_clear_display(); - lcd.must_clear = false; - } - return nonseekable_open(inode, file); -} - -static int lcd_release(struct inode *inode, struct file *file) -{ - atomic_inc(&lcd_available); - return 0; -} - -static const struct file_operations lcd_fops = { - .write = lcd_write, - .open = lcd_open, - .release = lcd_release, - .llseek = no_llseek, -}; - -static struct miscdevice lcd_dev = { - .minor = LCD_MINOR, - .name = "lcd", - .fops = &lcd_fops, -}; - -/* public function usable from the kernel for any purpose */ -static void panel_lcd_print(const char *s) -{ - const char *tmp = s; - int count = strlen(s); - - if (lcd.enabled && lcd.initialized) { - for (; count-- > 0; tmp++) { - if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) - /* - * let's be a little nice with other processes - * that need some CPU - */ - schedule(); - - lcd_write_char(*tmp); - } - } -} - -/* initialize the LCD driver */ -static void lcd_init(void) -{ - switch (selected_lcd_type) { - case LCD_TYPE_OLD: - /* parallel mode, 8 bits */ - lcd.proto = LCD_PROTO_PARALLEL; - lcd.charset = LCD_CHARSET_NORMAL; - lcd.pins.e = PIN_STROBE; - lcd.pins.rs = PIN_AUTOLF; - - lcd.width = 40; - lcd.bwidth = 40; - lcd.hwidth = 64; - lcd.height = 2; - break; - case LCD_TYPE_KS0074: - /* serial mode, ks0074 */ - lcd.proto = LCD_PROTO_SERIAL; - lcd.charset = LCD_CHARSET_KS0074; - lcd.pins.bl = PIN_AUTOLF; - lcd.pins.cl = PIN_STROBE; - lcd.pins.da = PIN_D0; - - lcd.width = 16; - lcd.bwidth = 40; - lcd.hwidth = 16; - lcd.height = 2; - break; - case LCD_TYPE_NEXCOM: - /* parallel mode, 8 bits, generic */ - lcd.proto = LCD_PROTO_PARALLEL; - lcd.charset = LCD_CHARSET_NORMAL; - lcd.pins.e = PIN_AUTOLF; - lcd.pins.rs = PIN_SELECP; - lcd.pins.rw = PIN_INITP; - - lcd.width = 16; - lcd.bwidth = 40; - lcd.hwidth = 64; - lcd.height = 2; - break; - case LCD_TYPE_CUSTOM: - /* customer-defined */ - lcd.proto = DEFAULT_LCD_PROTO; - lcd.charset = DEFAULT_LCD_CHARSET; - /* default geometry will be set later */ - break; - case LCD_TYPE_HANTRONIX: - /* parallel mode, 8 bits, hantronix-like */ - default: - lcd.proto = LCD_PROTO_PARALLEL; - lcd.charset = LCD_CHARSET_NORMAL; - lcd.pins.e = PIN_STROBE; - lcd.pins.rs = PIN_SELECP; - - lcd.width = 16; - lcd.bwidth = 40; - lcd.hwidth = 64; - lcd.height = 2; - break; - } - - /* Overwrite with module params set on loading */ - if (lcd_height != NOT_SET) - lcd.height = lcd_height; - if (lcd_width != NOT_SET) - lcd.width = lcd_width; - if (lcd_bwidth != NOT_SET) - lcd.bwidth = lcd_bwidth; - if (lcd_hwidth != NOT_SET) - lcd.hwidth = lcd_hwidth; - if (lcd_charset != NOT_SET) - lcd.charset = lcd_charset; - if (lcd_proto != NOT_SET) - lcd.proto = lcd_proto; - if (lcd_e_pin != PIN_NOT_SET) - lcd.pins.e = lcd_e_pin; - if (lcd_rs_pin != PIN_NOT_SET) - lcd.pins.rs = lcd_rs_pin; - if (lcd_rw_pin != PIN_NOT_SET) - lcd.pins.rw = lcd_rw_pin; - if (lcd_cl_pin != PIN_NOT_SET) - lcd.pins.cl = lcd_cl_pin; - if (lcd_da_pin != PIN_NOT_SET) - lcd.pins.da = lcd_da_pin; - if (lcd_bl_pin != PIN_NOT_SET) - lcd.pins.bl = lcd_bl_pin; - - /* this is used to catch wrong and default values */ - if (lcd.width <= 0) - lcd.width = DEFAULT_LCD_WIDTH; - if (lcd.bwidth <= 0) - lcd.bwidth = DEFAULT_LCD_BWIDTH; - if (lcd.hwidth <= 0) - lcd.hwidth = DEFAULT_LCD_HWIDTH; - if (lcd.height <= 0) - lcd.height = DEFAULT_LCD_HEIGHT; - - if (lcd.proto == LCD_PROTO_SERIAL) { /* SERIAL */ - lcd_write_cmd = lcd_write_cmd_s; - lcd_write_data = lcd_write_data_s; - lcd_clear_fast = lcd_clear_fast_s; - - if (lcd.pins.cl == PIN_NOT_SET) - lcd.pins.cl = DEFAULT_LCD_PIN_SCL; - if (lcd.pins.da == PIN_NOT_SET) - lcd.pins.da = DEFAULT_LCD_PIN_SDA; - - } else if (lcd.proto == LCD_PROTO_PARALLEL) { /* PARALLEL */ - lcd_write_cmd = lcd_write_cmd_p8; - lcd_write_data = lcd_write_data_p8; - lcd_clear_fast = lcd_clear_fast_p8; - - if (lcd.pins.e == PIN_NOT_SET) - lcd.pins.e = DEFAULT_LCD_PIN_E; - if (lcd.pins.rs == PIN_NOT_SET) - lcd.pins.rs = DEFAULT_LCD_PIN_RS; - if (lcd.pins.rw == PIN_NOT_SET) - lcd.pins.rw = DEFAULT_LCD_PIN_RW; - } else { - lcd_write_cmd = lcd_write_cmd_tilcd; - lcd_write_data = lcd_write_data_tilcd; - lcd_clear_fast = lcd_clear_fast_tilcd; - } - - if (lcd.pins.bl == PIN_NOT_SET) - lcd.pins.bl = DEFAULT_LCD_PIN_BL; - - if (lcd.pins.e == PIN_NOT_SET) - lcd.pins.e = PIN_NONE; - if (lcd.pins.rs == PIN_NOT_SET) - lcd.pins.rs = PIN_NONE; - if (lcd.pins.rw == PIN_NOT_SET) - lcd.pins.rw = PIN_NONE; - if (lcd.pins.bl == PIN_NOT_SET) - lcd.pins.bl = PIN_NONE; - if (lcd.pins.cl == PIN_NOT_SET) - lcd.pins.cl = PIN_NONE; - if (lcd.pins.da == PIN_NOT_SET) - lcd.pins.da = PIN_NONE; - - if (lcd.charset == NOT_SET) - lcd.charset = DEFAULT_LCD_CHARSET; - - if (lcd.charset == LCD_CHARSET_KS0074) - lcd_char_conv = lcd_char_conv_ks0074; - else - lcd_char_conv = NULL; - - if (lcd.pins.bl != PIN_NONE) { - mutex_init(&lcd.bl_tempo_lock); - INIT_DELAYED_WORK(&lcd.bl_work, lcd_bl_off); - } - - pin_to_bits(lcd.pins.e, lcd_bits[LCD_PORT_D][LCD_BIT_E], - lcd_bits[LCD_PORT_C][LCD_BIT_E]); - pin_to_bits(lcd.pins.rs, lcd_bits[LCD_PORT_D][LCD_BIT_RS], - lcd_bits[LCD_PORT_C][LCD_BIT_RS]); - pin_to_bits(lcd.pins.rw, lcd_bits[LCD_PORT_D][LCD_BIT_RW], - lcd_bits[LCD_PORT_C][LCD_BIT_RW]); - pin_to_bits(lcd.pins.bl, lcd_bits[LCD_PORT_D][LCD_BIT_BL], - lcd_bits[LCD_PORT_C][LCD_BIT_BL]); - pin_to_bits(lcd.pins.cl, lcd_bits[LCD_PORT_D][LCD_BIT_CL], - lcd_bits[LCD_PORT_C][LCD_BIT_CL]); - pin_to_bits(lcd.pins.da, lcd_bits[LCD_PORT_D][LCD_BIT_DA], - lcd_bits[LCD_PORT_C][LCD_BIT_DA]); - - /* - * before this line, we must NOT send anything to the display. - * Since lcd_init_display() needs to write data, we have to - * enable mark the LCD initialized just before. - */ - lcd.initialized = true; - lcd_init_display(); - - /* display a short message */ -#ifdef CONFIG_PANEL_CHANGE_MESSAGE -#ifdef CONFIG_PANEL_BOOT_MESSAGE - panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*" CONFIG_PANEL_BOOT_MESSAGE); -#endif -#else - panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*Linux-" UTS_RELEASE); -#endif - /* clear the display on the next device opening */ - lcd.must_clear = true; - lcd_home(); -} - -/* - * These are the file operation function for user access to /dev/keypad - */ - -static ssize_t keypad_read(struct file *file, - char __user *buf, size_t count, loff_t *ppos) -{ - unsigned i = *ppos; - char __user *tmp = buf; - - if (keypad_buflen == 0) { - if (file->f_flags & O_NONBLOCK) - return -EAGAIN; - - if (wait_event_interruptible(keypad_read_wait, - keypad_buflen != 0)) - return -EINTR; - } - - for (; count-- > 0 && (keypad_buflen > 0); - ++i, ++tmp, --keypad_buflen) { - put_user(keypad_buffer[keypad_start], tmp); - keypad_start = (keypad_start + 1) % KEYPAD_BUFFER; - } - *ppos = i; - - return tmp - buf; -} - -static int keypad_open(struct inode *inode, struct file *file) -{ - if (!atomic_dec_and_test(&keypad_available)) - return -EBUSY; /* open only once at a time */ - - if (file->f_mode & FMODE_WRITE) /* device is read-only */ - return -EPERM; - - keypad_buflen = 0; /* flush the buffer on opening */ - return 0; -} - -static int keypad_release(struct inode *inode, struct file *file) -{ - atomic_inc(&keypad_available); - return 0; -} - -static const struct file_operations keypad_fops = { - .read = keypad_read, /* read */ - .open = keypad_open, /* open */ - .release = keypad_release, /* close */ - .llseek = default_llseek, -}; - -static struct miscdevice keypad_dev = { - .minor = KEYPAD_MINOR, - .name = "keypad", - .fops = &keypad_fops, -}; - -static void keypad_send_key(const char *string, int max_len) -{ - /* send the key to the device only if a process is attached to it. */ - if (!atomic_read(&keypad_available)) { - while (max_len-- && keypad_buflen < KEYPAD_BUFFER && *string) { - keypad_buffer[(keypad_start + keypad_buflen++) % - KEYPAD_BUFFER] = *string++; - } - wake_up_interruptible(&keypad_read_wait); - } -} - -/* this function scans all the bits involving at least one logical signal, - * and puts the results in the bitfield "phys_read" (one bit per established - * contact), and sets "phys_read_prev" to "phys_read". - * - * Note: to debounce input signals, we will only consider as switched a signal - * which is stable across 2 measures. Signals which are different between two - * reads will be kept as they previously were in their logical form (phys_prev). - * A signal which has just switched will have a 1 in - * (phys_read ^ phys_read_prev). - */ -static void phys_scan_contacts(void) -{ - int bit, bitval; - char oldval; - char bitmask; - char gndmask; - - phys_prev = phys_curr; - phys_read_prev = phys_read; - phys_read = 0; /* flush all signals */ - - /* keep track of old value, with all outputs disabled */ - oldval = r_dtr(pprt) | scan_mask_o; - /* activate all keyboard outputs (active low) */ - w_dtr(pprt, oldval & ~scan_mask_o); - - /* will have a 1 for each bit set to gnd */ - bitmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i; - /* disable all matrix signals */ - w_dtr(pprt, oldval); - - /* now that all outputs are cleared, the only active input bits are - * directly connected to the ground - */ - - /* 1 for each grounded input */ - gndmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i; - - /* grounded inputs are signals 40-44 */ - phys_read |= (__u64)gndmask << 40; - - if (bitmask != gndmask) { - /* - * since clearing the outputs changed some inputs, we know - * that some input signals are currently tied to some outputs. - * So we'll scan them. - */ - for (bit = 0; bit < 8; bit++) { - bitval = BIT(bit); - - if (!(scan_mask_o & bitval)) /* skip unused bits */ - continue; - - w_dtr(pprt, oldval & ~bitval); /* enable this output */ - bitmask = PNL_PINPUT(r_str(pprt)) & ~gndmask; - phys_read |= (__u64)bitmask << (5 * bit); - } - w_dtr(pprt, oldval); /* disable all outputs */ - } - /* - * this is easy: use old bits when they are flapping, - * use new ones when stable - */ - phys_curr = (phys_prev & (phys_read ^ phys_read_prev)) | - (phys_read & ~(phys_read ^ phys_read_prev)); -} - -static inline int input_state_high(struct logical_input *input) -{ -#if 0 - /* FIXME: - * this is an invalid test. It tries to catch - * transitions from single-key to multiple-key, but - * doesn't take into account the contacts polarity. - * The only solution to the problem is to parse keys - * from the most complex to the simplest combinations, - * and mark them as 'caught' once a combination - * matches, then unmatch it for all other ones. - */ - - /* try to catch dangerous transitions cases : - * someone adds a bit, so this signal was a false - * positive resulting from a transition. We should - * invalidate the signal immediately and not call the - * release function. - * eg: 0 -(press A)-> A -(press B)-> AB : don't match A's release. - */ - if (((phys_prev & input->mask) == input->value) && - ((phys_curr & input->mask) > input->value)) { - input->state = INPUT_ST_LOW; /* invalidate */ - return 1; - } -#endif - - if ((phys_curr & input->mask) == input->value) { - if ((input->type == INPUT_TYPE_STD) && - (input->high_timer == 0)) { - input->high_timer++; - if (input->u.std.press_fct) - input->u.std.press_fct(input->u.std.press_data); - } else if (input->type == INPUT_TYPE_KBD) { - /* will turn on the light */ - keypressed = 1; - - if (input->high_timer == 0) { - char *press_str = input->u.kbd.press_str; - - if (press_str[0]) { - int s = sizeof(input->u.kbd.press_str); - - keypad_send_key(press_str, s); - } - } - - if (input->u.kbd.repeat_str[0]) { - char *repeat_str = input->u.kbd.repeat_str; - - if (input->high_timer >= KEYPAD_REP_START) { - int s = sizeof(input->u.kbd.repeat_str); - - input->high_timer -= KEYPAD_REP_DELAY; - keypad_send_key(repeat_str, s); - } - /* we will need to come back here soon */ - inputs_stable = 0; - } - - if (input->high_timer < 255) - input->high_timer++; - } - return 1; - } - - /* else signal falling down. Let's fall through. */ - input->state = INPUT_ST_FALLING; - input->fall_timer = 0; - - return 0; -} - -static inline void input_state_falling(struct logical_input *input) -{ -#if 0 - /* FIXME !!! same comment as in input_state_high */ - if (((phys_prev & input->mask) == input->value) && - ((phys_curr & input->mask) > input->value)) { - input->state = INPUT_ST_LOW; /* invalidate */ - return; - } -#endif - - if ((phys_curr & input->mask) == input->value) { - if (input->type == INPUT_TYPE_KBD) { - /* will turn on the light */ - keypressed = 1; - - if (input->u.kbd.repeat_str[0]) { - char *repeat_str = input->u.kbd.repeat_str; - - if (input->high_timer >= KEYPAD_REP_START) { - int s = sizeof(input->u.kbd.repeat_str); - - input->high_timer -= KEYPAD_REP_DELAY; - keypad_send_key(repeat_str, s); - } - /* we will need to come back here soon */ - inputs_stable = 0; - } - - if (input->high_timer < 255) - input->high_timer++; - } - input->state = INPUT_ST_HIGH; - } else if (input->fall_timer >= input->fall_time) { - /* call release event */ - if (input->type == INPUT_TYPE_STD) { - void (*release_fct)(int) = input->u.std.release_fct; - - if (release_fct) - release_fct(input->u.std.release_data); - } else if (input->type == INPUT_TYPE_KBD) { - char *release_str = input->u.kbd.release_str; - - if (release_str[0]) { - int s = sizeof(input->u.kbd.release_str); - - keypad_send_key(release_str, s); - } - } - - input->state = INPUT_ST_LOW; - } else { - input->fall_timer++; - inputs_stable = 0; - } -} - -static void panel_process_inputs(void) -{ - struct list_head *item; - struct logical_input *input; - - keypressed = 0; - inputs_stable = 1; - list_for_each(item, &logical_inputs) { - input = list_entry(item, struct logical_input, list); - - switch (input->state) { - case INPUT_ST_LOW: - if ((phys_curr & input->mask) != input->value) - break; - /* if all needed ones were already set previously, - * this means that this logical signal has been - * activated by the releasing of another combined - * signal, so we don't want to match. - * eg: AB -(release B)-> A -(release A)-> 0 : - * don't match A. - */ - if ((phys_prev & input->mask) == input->value) - break; - input->rise_timer = 0; - input->state = INPUT_ST_RISING; - /* no break here, fall through */ - case INPUT_ST_RISING: - if ((phys_curr & input->mask) != input->value) { - input->state = INPUT_ST_LOW; - break; - } - if (input->rise_timer < input->rise_time) { - inputs_stable = 0; - input->rise_timer++; - break; - } - input->high_timer = 0; - input->state = INPUT_ST_HIGH; - /* no break here, fall through */ - case INPUT_ST_HIGH: - if (input_state_high(input)) - break; - /* no break here, fall through */ - case INPUT_ST_FALLING: - input_state_falling(input); - } - } -} - -static void panel_scan_timer(void) -{ - if (keypad.enabled && keypad_initialized) { - if (spin_trylock_irq(&pprt_lock)) { - phys_scan_contacts(); - - /* no need for the parport anymore */ - spin_unlock_irq(&pprt_lock); - } - - if (!inputs_stable || phys_curr != phys_prev) - panel_process_inputs(); - } - - if (keypressed && lcd.enabled && lcd.initialized) - lcd_poke(); - - mod_timer(&scan_timer, jiffies + INPUT_POLL_TIME); -} - -static void init_scan_timer(void) -{ - if (scan_timer.function) - return; /* already started */ - - setup_timer(&scan_timer, (void *)&panel_scan_timer, 0); - scan_timer.expires = jiffies + INPUT_POLL_TIME; - add_timer(&scan_timer); -} - -/* converts a name of the form "({BbAaPpSsEe}{01234567-})*" to a series of bits. - * if <omask> or <imask> are non-null, they will be or'ed with the bits - * corresponding to out and in bits respectively. - * returns 1 if ok, 0 if error (in which case, nothing is written). - */ -static u8 input_name2mask(const char *name, __u64 *mask, __u64 *value, - u8 *imask, u8 *omask) -{ - const char sigtab[] = "EeSsPpAaBb"; - u8 im, om; - __u64 m, v; - - om = 0; - im = 0; - m = 0ULL; - v = 0ULL; - while (*name) { - int in, out, bit, neg; - const char *idx; - - idx = strchr(sigtab, *name); - if (!idx) - return 0; /* input name not found */ - - in = idx - sigtab; - neg = (in & 1); /* odd (lower) names are negated */ - in >>= 1; - im |= BIT(in); - - name++; - if (*name >= '0' && *name <= '7') { - out = *name - '0'; - om |= BIT(out); - } else if (*name == '-') { - out = 8; - } else { - return 0; /* unknown bit name */ - } - - bit = (out * 5) + in; - - m |= 1ULL << bit; - if (!neg) - v |= 1ULL << bit; - name++; - } - *mask = m; - *value = v; - if (imask) - *imask |= im; - if (omask) - *omask |= om; - return 1; -} - -/* tries to bind a key to the signal name <name>. The key will send the - * strings <press>, <repeat>, <release> for these respective events. - * Returns the pointer to the new key if ok, NULL if the key could not be bound. - */ -static struct logical_input *panel_bind_key(const char *name, const char *press, - const char *repeat, - const char *release) -{ - struct logical_input *key; - - key = kzalloc(sizeof(*key), GFP_KERNEL); - if (!key) - return NULL; - - if (!input_name2mask(name, &key->mask, &key->value, &scan_mask_i, - &scan_mask_o)) { - kfree(key); - return NULL; - } - - key->type = INPUT_TYPE_KBD; - key->state = INPUT_ST_LOW; - key->rise_time = 1; - key->fall_time = 1; - - strncpy(key->u.kbd.press_str, press, sizeof(key->u.kbd.press_str)); - strncpy(key->u.kbd.repeat_str, repeat, sizeof(key->u.kbd.repeat_str)); - strncpy(key->u.kbd.release_str, release, - sizeof(key->u.kbd.release_str)); - list_add(&key->list, &logical_inputs); - return key; -} - -#if 0 -/* tries to bind a callback function to the signal name <name>. The function - * <press_fct> will be called with the <press_data> arg when the signal is - * activated, and so on for <release_fct>/<release_data> - * Returns the pointer to the new signal if ok, NULL if the signal could not - * be bound. - */ -static struct logical_input *panel_bind_callback(char *name, - void (*press_fct)(int), - int press_data, - void (*release_fct)(int), - int release_data) -{ - struct logical_input *callback; - - callback = kmalloc(sizeof(*callback), GFP_KERNEL); - if (!callback) - return NULL; - - memset(callback, 0, sizeof(struct logical_input)); - if (!input_name2mask(name, &callback->mask, &callback->value, - &scan_mask_i, &scan_mask_o)) - return NULL; - - callback->type = INPUT_TYPE_STD; - callback->state = INPUT_ST_LOW; - callback->rise_time = 1; - callback->fall_time = 1; - callback->u.std.press_fct = press_fct; - callback->u.std.press_data = press_data; - callback->u.std.release_fct = release_fct; - callback->u.std.release_data = release_data; - list_add(&callback->list, &logical_inputs); - return callback; -} -#endif - -static void keypad_init(void) -{ - int keynum; - - init_waitqueue_head(&keypad_read_wait); - keypad_buflen = 0; /* flushes any eventual noisy keystroke */ - - /* Let's create all known keys */ - - for (keynum = 0; keypad_profile[keynum][0][0]; keynum++) { - panel_bind_key(keypad_profile[keynum][0], - keypad_profile[keynum][1], - keypad_profile[keynum][2], - keypad_profile[keynum][3]); - } - - init_scan_timer(); - keypad_initialized = 1; -} - -/**************************************************/ -/* device initialization */ -/**************************************************/ - -static int panel_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) -{ - if (lcd.enabled && lcd.initialized) { - switch (code) { - case SYS_DOWN: - panel_lcd_print - ("\x0cReloading\nSystem...\x1b[Lc\x1b[Lb\x1b[L+"); - break; - case SYS_HALT: - panel_lcd_print - ("\x0cSystem Halted.\x1b[Lc\x1b[Lb\x1b[L+"); - break; - case SYS_POWER_OFF: - panel_lcd_print("\x0cPower off.\x1b[Lc\x1b[Lb\x1b[L+"); - break; - default: - break; - } - } - return NOTIFY_DONE; -} - -static struct notifier_block panel_notifier = { - panel_notify_sys, - NULL, - 0 -}; - -static void panel_attach(struct parport *port) -{ - struct pardev_cb panel_cb; - - if (port->number != parport) - return; - - if (pprt) { - pr_err("%s: port->number=%d parport=%d, already registered!\n", - __func__, port->number, parport); - return; - } - - memset(&panel_cb, 0, sizeof(panel_cb)); - panel_cb.private = &pprt; - /* panel_cb.flags = 0 should be PARPORT_DEV_EXCL? */ - - pprt = parport_register_dev_model(port, "panel", &panel_cb, 0); - if (!pprt) { - pr_err("%s: port->number=%d parport=%d, parport_register_device() failed\n", - __func__, port->number, parport); - return; - } - - if (parport_claim(pprt)) { - pr_err("could not claim access to parport%d. Aborting.\n", - parport); - goto err_unreg_device; - } - - /* must init LCD first, just in case an IRQ from the keypad is - * generated at keypad init - */ - if (lcd.enabled) { - lcd_init(); - if (misc_register(&lcd_dev)) - goto err_unreg_device; - } - - if (keypad.enabled) { - keypad_init(); - if (misc_register(&keypad_dev)) - goto err_lcd_unreg; - } - register_reboot_notifier(&panel_notifier); - return; - -err_lcd_unreg: - if (lcd.enabled) - misc_deregister(&lcd_dev); -err_unreg_device: - parport_unregister_device(pprt); - pprt = NULL; -} - -static void panel_detach(struct parport *port) -{ - if (port->number != parport) - return; - - if (!pprt) { - pr_err("%s: port->number=%d parport=%d, nothing to unregister.\n", - __func__, port->number, parport); - return; - } - if (scan_timer.function) - del_timer_sync(&scan_timer); - - if (keypad.enabled) { - misc_deregister(&keypad_dev); - keypad_initialized = 0; - } - - if (lcd.enabled) { - panel_lcd_print("\x0cLCD driver unloaded.\x1b[Lc\x1b[Lb\x1b[L-"); - misc_deregister(&lcd_dev); - if (lcd.pins.bl != PIN_NONE) { - cancel_delayed_work_sync(&lcd.bl_work); - __lcd_backlight(0); - } - lcd.initialized = false; - } - - /* TODO: free all input signals */ - parport_release(pprt); - parport_unregister_device(pprt); - pprt = NULL; - unregister_reboot_notifier(&panel_notifier); -} - -static struct parport_driver panel_driver = { - .name = "panel", - .match_port = panel_attach, - .detach = panel_detach, - .devmodel = true, -}; - -/* init function */ -static int __init panel_init_module(void) -{ - int selected_keypad_type = NOT_SET, err; - - /* take care of an eventual profile */ - switch (profile) { - case PANEL_PROFILE_CUSTOM: - /* custom profile */ - selected_keypad_type = DEFAULT_KEYPAD_TYPE; - selected_lcd_type = DEFAULT_LCD_TYPE; - break; - case PANEL_PROFILE_OLD: - /* 8 bits, 2*16, old keypad */ - selected_keypad_type = KEYPAD_TYPE_OLD; - selected_lcd_type = LCD_TYPE_OLD; - - /* TODO: This two are a little hacky, sort it out later */ - if (lcd_width == NOT_SET) - lcd_width = 16; - if (lcd_hwidth == NOT_SET) - lcd_hwidth = 16; - break; - case PANEL_PROFILE_NEW: - /* serial, 2*16, new keypad */ - selected_keypad_type = KEYPAD_TYPE_NEW; - selected_lcd_type = LCD_TYPE_KS0074; - break; - case PANEL_PROFILE_HANTRONIX: - /* 8 bits, 2*16 hantronix-like, no keypad */ - selected_keypad_type = KEYPAD_TYPE_NONE; - selected_lcd_type = LCD_TYPE_HANTRONIX; - break; - case PANEL_PROFILE_NEXCOM: - /* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */ - selected_keypad_type = KEYPAD_TYPE_NEXCOM; - selected_lcd_type = LCD_TYPE_NEXCOM; - break; - case PANEL_PROFILE_LARGE: - /* 8 bits, 2*40, old keypad */ - selected_keypad_type = KEYPAD_TYPE_OLD; - selected_lcd_type = LCD_TYPE_OLD; - break; - } - - /* - * Overwrite selection with module param values (both keypad and lcd), - * where the deprecated params have lower prio. - */ - if (keypad_enabled != NOT_SET) - selected_keypad_type = keypad_enabled; - if (keypad_type != NOT_SET) - selected_keypad_type = keypad_type; - - keypad.enabled = (selected_keypad_type > 0); - - if (lcd_enabled != NOT_SET) - selected_lcd_type = lcd_enabled; - if (lcd_type != NOT_SET) - selected_lcd_type = lcd_type; - - lcd.enabled = (selected_lcd_type > 0); - - if (lcd.enabled) { - /* - * Init lcd struct with load-time values to preserve exact - * current functionality (at least for now). - */ - lcd.height = lcd_height; - lcd.width = lcd_width; - lcd.bwidth = lcd_bwidth; - lcd.hwidth = lcd_hwidth; - lcd.charset = lcd_charset; - lcd.proto = lcd_proto; - lcd.pins.e = lcd_e_pin; - lcd.pins.rs = lcd_rs_pin; - lcd.pins.rw = lcd_rw_pin; - lcd.pins.cl = lcd_cl_pin; - lcd.pins.da = lcd_da_pin; - lcd.pins.bl = lcd_bl_pin; - - /* Leave it for now, just in case */ - lcd.esc_seq.len = -1; - } - - switch (selected_keypad_type) { - case KEYPAD_TYPE_OLD: - keypad_profile = old_keypad_profile; - break; - case KEYPAD_TYPE_NEW: - keypad_profile = new_keypad_profile; - break; - case KEYPAD_TYPE_NEXCOM: - keypad_profile = nexcom_keypad_profile; - break; - default: - keypad_profile = NULL; - break; - } - - if (!lcd.enabled && !keypad.enabled) { - /* no device enabled, let's exit */ - pr_err("panel driver disabled.\n"); - return -ENODEV; - } - - err = parport_register_driver(&panel_driver); - if (err) { - pr_err("could not register with parport. Aborting.\n"); - return err; - } - - if (pprt) - pr_info("panel driver registered on parport%d (io=0x%lx).\n", - parport, pprt->port->base); - else - pr_info("panel driver not yet registered\n"); - return 0; -} - -static void __exit panel_cleanup_module(void) -{ - parport_unregister_driver(&panel_driver); -} - -module_init(panel_init_module); -module_exit(panel_cleanup_module); -MODULE_AUTHOR("Willy Tarreau"); -MODULE_LICENSE("GPL"); - -/* - * Local variables: - * c-indent-level: 4 - * tab-width: 8 - * End: - */ |