diff options
Diffstat (limited to 'drivers/gpu/drm/sun4i')
| -rw-r--r-- | drivers/gpu/drm/sun4i/sun4i_tcon.c | 25 |
1 files changed, 0 insertions, 25 deletions
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 08747fc3ee71..8232b39e16ca 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -17,7 +17,6 @@ #include <drm/drm_encoder.h> #include <drm/drm_modes.h> #include <drm/drm_of.h> -#include <drm/drm_panel.h> #include <uapi/drm/drm_mode.h> @@ -418,9 +417,6 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, const struct drm_display_mode *mode) { - struct drm_panel *panel = tcon->panel; - struct drm_connector *connector = panel->connector; - struct drm_display_info display_info = connector->display_info; unsigned int bp, hsync, vsync; u8 clk_delay; u32 val = 0; @@ -478,27 +474,6 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, if (mode->flags & DRM_MODE_FLAG_PVSYNC) val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; - /* - * On A20 and similar SoCs, the only way to achieve Positive Edge - * (Rising Edge), is setting dclk clock phase to 2/3(240°). - * By default TCON works in Negative Edge(Falling Edge), - * this is why phase is set to 0 in that case. - * Unfortunately there's no way to logically invert dclk through - * IO_POL register. - * The only acceptable way to work, triple checked with scope, - * is using clock phase set to 0° for Negative Edge and set to 240° - * for Positive Edge. - * On A33 and similar SoCs there would be a 90° phase option, - * but it divides also dclk by 2. - * Following code is a way to avoid quirks all around TCON - * and DOTCLOCK drivers. - */ - if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE) - clk_set_phase(tcon->dclk, 240); - - if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE) - clk_set_phase(tcon->dclk, 0); - regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG, SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE, val); |