diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_reg.h')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_reg.h | 780 |
1 files changed, 617 insertions, 163 deletions
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index c77af69c2d8f..e691b30b2817 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -29,6 +29,8 @@ #define _TRANSCODER(tran, a, b) ((a) + (tran)*((b)-(a))) #define _PORT(port, a, b) ((a) + (port)*((b)-(a))) +#define _PIPE3(pipe, a, b, c) (pipe < 2 ? _PIPE(pipe, a, b) : c) +#define _PORT3(port, a, b, c) (port < 2 ? _PORT(port, a, b) : c) #define _MASKED_BIT_ENABLE(a) (((a) << 16) | (a)) #define _MASKED_BIT_DISABLE(a) ((a) << 16) @@ -77,13 +79,19 @@ /* Graphics reset regs */ #define I965_GDRST 0xc0 /* PCI config register */ -#define ILK_GDSR 0x2ca4 /* MCHBAR offset */ #define GRDOM_FULL (0<<2) #define GRDOM_RENDER (1<<2) #define GRDOM_MEDIA (3<<2) #define GRDOM_MASK (3<<2) #define GRDOM_RESET_ENABLE (1<<0) +#define ILK_GDSR 0x2ca4 /* MCHBAR offset */ +#define ILK_GRDOM_FULL (0<<1) +#define ILK_GRDOM_RENDER (1<<1) +#define ILK_GRDOM_MEDIA (3<<1) +#define ILK_GRDOM_MASK (3<<1) +#define ILK_GRDOM_RESET_ENABLE (1<<0) + #define GEN6_MBCUNIT_SNPCR 0x900c /* for LLC config */ #define GEN6_MBC_SNPCR_SHIFT 21 #define GEN6_MBC_SNPCR_MASK (3<<21) @@ -92,6 +100,9 @@ #define GEN6_MBC_SNPCR_LOW (2<<21) #define GEN6_MBC_SNPCR_MIN (3<<21) /* only 1/16th of the cache is shared */ +#define VLV_G3DCTL 0x9024 +#define VLV_GSCKGCTL 0x9028 + #define GEN6_MBCTL 0x0907c #define GEN6_MBCTL_ENABLE_BOOT_FETCH (1 << 4) #define GEN6_MBCTL_CTX_FETCH_NEEDED (1 << 3) @@ -190,6 +201,8 @@ * Memory interface instructions used by the kernel */ #define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags)) +/* Many MI commands use bit 22 of the header dword for GGTT vs PPGTT */ +#define MI_GLOBAL_GTT (1<<22) #define MI_NOOP MI_INSTR(0, 0) #define MI_USER_INTERRUPT MI_INSTR(0x02, 0) @@ -244,7 +257,8 @@ #define MI_SEMAPHORE_SYNC_BVE (0<<16) /* VECS wait for BCS (VEBSYNC) */ #define MI_SEMAPHORE_SYNC_VVE (1<<16) /* VECS wait for VCS (VEVSYNC) */ #define MI_SEMAPHORE_SYNC_RVE (2<<16) /* VECS wait for RCS (VERSYNC) */ -#define MI_SEMAPHORE_SYNC_INVALID (3<<16) +#define MI_SEMAPHORE_SYNC_INVALID (3<<16) +#define MI_SEMAPHORE_SYNC_MASK (3<<16) #define MI_SET_CONTEXT MI_INSTR(0x18, 0) #define MI_MM_SPACE_GTT (1<<8) #define MI_MM_SPACE_PHYSICAL (0<<8) @@ -262,13 +276,16 @@ * - One can actually load arbitrary many arbitrary registers: Simply issue x * address/value pairs. Don't overdue it, though, x <= 2^4 must hold! */ -#define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*x-1) -#define MI_STORE_REGISTER_MEM(x) MI_INSTR(0x24, 2*x-1) +#define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*(x)-1) +#define MI_STORE_REGISTER_MEM(x) MI_INSTR(0x24, 2*(x)-1) +#define MI_STORE_REGISTER_MEM_GEN8(x) MI_INSTR(0x24, 3*(x)-1) #define MI_SRM_LRM_GLOBAL_GTT (1<<22) #define MI_FLUSH_DW MI_INSTR(0x26, 1) /* for GEN6 */ #define MI_FLUSH_DW_STORE_INDEX (1<<21) #define MI_INVALIDATE_TLB (1<<18) #define MI_FLUSH_DW_OP_STOREDW (1<<14) +#define MI_FLUSH_DW_OP_MASK (3<<14) +#define MI_FLUSH_DW_NOTIFY (1<<8) #define MI_INVALIDATE_BSD (1<<7) #define MI_FLUSH_DW_USE_GTT (1<<2) #define MI_FLUSH_DW_USE_PPGTT (0<<2) @@ -330,9 +347,12 @@ #define DISPLAY_PLANE_B (1<<20) #define GFX_OP_PIPE_CONTROL(len) ((0x3<<29)|(0x3<<27)|(0x2<<24)|(len-2)) #define PIPE_CONTROL_GLOBAL_GTT_IVB (1<<24) /* gen7+ */ +#define PIPE_CONTROL_MMIO_WRITE (1<<23) +#define PIPE_CONTROL_STORE_DATA_INDEX (1<<21) #define PIPE_CONTROL_CS_STALL (1<<20) #define PIPE_CONTROL_TLB_INVALIDATE (1<<18) #define PIPE_CONTROL_QW_WRITE (1<<14) +#define PIPE_CONTROL_POST_SYNC_OP_MASK (3<<14) #define PIPE_CONTROL_DEPTH_STALL (1<<13) #define PIPE_CONTROL_WRITE_FLUSH (1<<12) #define PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH (1<<12) /* gen6+ */ @@ -347,6 +367,94 @@ #define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1<<0) #define PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */ +/* + * Commands used only by the command parser + */ +#define MI_SET_PREDICATE MI_INSTR(0x01, 0) +#define MI_ARB_CHECK MI_INSTR(0x05, 0) +#define MI_RS_CONTROL MI_INSTR(0x06, 0) +#define MI_URB_ATOMIC_ALLOC MI_INSTR(0x09, 0) +#define MI_PREDICATE MI_INSTR(0x0C, 0) +#define MI_RS_CONTEXT MI_INSTR(0x0F, 0) +#define MI_TOPOLOGY_FILTER MI_INSTR(0x0D, 0) +#define MI_LOAD_SCAN_LINES_EXCL MI_INSTR(0x13, 0) +#define MI_URB_CLEAR MI_INSTR(0x19, 0) +#define MI_UPDATE_GTT MI_INSTR(0x23, 0) +#define MI_CLFLUSH MI_INSTR(0x27, 0) +#define MI_REPORT_PERF_COUNT MI_INSTR(0x28, 0) +#define MI_REPORT_PERF_COUNT_GGTT (1<<0) +#define MI_LOAD_REGISTER_MEM MI_INSTR(0x29, 0) +#define MI_LOAD_REGISTER_REG MI_INSTR(0x2A, 0) +#define MI_RS_STORE_DATA_IMM MI_INSTR(0x2B, 0) +#define MI_LOAD_URB_MEM MI_INSTR(0x2C, 0) +#define MI_STORE_URB_MEM MI_INSTR(0x2D, 0) +#define MI_CONDITIONAL_BATCH_BUFFER_END MI_INSTR(0x36, 0) + +#define PIPELINE_SELECT ((0x3<<29)|(0x1<<27)|(0x1<<24)|(0x4<<16)) +#define GFX_OP_3DSTATE_VF_STATISTICS ((0x3<<29)|(0x1<<27)|(0x0<<24)|(0xB<<16)) +#define MEDIA_VFE_STATE ((0x3<<29)|(0x2<<27)|(0x0<<24)|(0x0<<16)) +#define MEDIA_VFE_STATE_MMIO_ACCESS_MASK (0x18) +#define GPGPU_OBJECT ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x4<<16)) +#define GPGPU_WALKER ((0x3<<29)|(0x2<<27)|(0x1<<24)|(0x5<<16)) +#define GFX_OP_3DSTATE_DX9_CONSTANTF_VS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x39<<16)) +#define GFX_OP_3DSTATE_DX9_CONSTANTF_PS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x3A<<16)) +#define GFX_OP_3DSTATE_SO_DECL_LIST \ + ((0x3<<29)|(0x3<<27)|(0x1<<24)|(0x17<<16)) + +#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_VS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x43<<16)) +#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_GS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x44<<16)) +#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_HS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x45<<16)) +#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_DS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x46<<16)) +#define GFX_OP_3DSTATE_BINDING_TABLE_EDIT_PS \ + ((0x3<<29)|(0x3<<27)|(0x0<<24)|(0x47<<16)) + +#define MFX_WAIT ((0x3<<29)|(0x1<<27)|(0x0<<16)) + +#define COLOR_BLT ((0x2<<29)|(0x40<<22)) +#define SRC_COPY_BLT ((0x2<<29)|(0x43<<22)) + +/* + * Registers used only by the command parser + */ +#define BCS_SWCTRL 0x22200 + +#define HS_INVOCATION_COUNT 0x2300 +#define DS_INVOCATION_COUNT 0x2308 +#define IA_VERTICES_COUNT 0x2310 +#define IA_PRIMITIVES_COUNT 0x2318 +#define VS_INVOCATION_COUNT 0x2320 +#define GS_INVOCATION_COUNT 0x2328 +#define GS_PRIMITIVES_COUNT 0x2330 +#define CL_INVOCATION_COUNT 0x2338 +#define CL_PRIMITIVES_COUNT 0x2340 +#define PS_INVOCATION_COUNT 0x2348 +#define PS_DEPTH_COUNT 0x2350 + +/* There are the 4 64-bit counter registers, one for each stream output */ +#define GEN7_SO_NUM_PRIMS_WRITTEN(n) (0x5200 + (n) * 8) + +#define GEN7_SO_PRIM_STORAGE_NEEDED(n) (0x5240 + (n) * 8) + +#define GEN7_3DPRIM_END_OFFSET 0x2420 +#define GEN7_3DPRIM_START_VERTEX 0x2430 +#define GEN7_3DPRIM_VERTEX_COUNT 0x2434 +#define GEN7_3DPRIM_INSTANCE_COUNT 0x2438 +#define GEN7_3DPRIM_START_INSTANCE 0x243C +#define GEN7_3DPRIM_BASE_VERTEX 0x2440 + +#define OACONTROL 0x2360 + +#define _GEN7_PIPEA_DE_LOAD_SL 0x70068 +#define _GEN7_PIPEB_DE_LOAD_SL 0x71068 +#define GEN7_PIPE_DE_LOAD_SL(pipe) _PIPE(pipe, \ + _GEN7_PIPEA_DE_LOAD_SL, \ + _GEN7_PIPEB_DE_LOAD_SL) /* * Reset registers @@ -370,6 +478,7 @@ #define IOSF_PORT_PUNIT 0x4 #define IOSF_PORT_NC 0x11 #define IOSF_PORT_DPIO 0x12 +#define IOSF_PORT_DPIO_2 0x1a #define IOSF_PORT_GPIO_NC 0x13 #define IOSF_PORT_CCK 0x14 #define IOSF_PORT_CCU 0xA9 @@ -381,9 +490,6 @@ /* See configdb bunit SB addr map */ #define BUNIT_REG_BISOC 0x11 -#define PUNIT_OPCODE_REG_READ 6 -#define PUNIT_OPCODE_REG_WRITE 7 - #define PUNIT_REG_DSPFREQ 0x36 #define DSPFREQSTAT_SHIFT 30 #define DSPFREQSTAT_MASK (0x3 << DSPFREQSTAT_SHIFT) @@ -469,16 +575,91 @@ enum punit_power_well { #define DSI_PLL_M1_DIV_MASK (0x1ff << 0) #define CCK_DISPLAY_CLOCK_CONTROL 0x6b -/* - * DPIO - a special bus for various display related registers to hide behind +/** + * DOC: DPIO + * + * VLV and CHV have slightly peculiar display PHYs for driving DP/HDMI + * ports. DPIO is the name given to such a display PHY. These PHYs + * don't follow the standard programming model using direct MMIO + * registers, and instead their registers must be accessed trough IOSF + * sideband. VLV has one such PHY for driving ports B and C, and CHV + * adds another PHY for driving port D. Each PHY responds to specific + * IOSF-SB port. + * + * Each display PHY is made up of one or two channels. Each channel + * houses a common lane part which contains the PLL and other common + * logic. CH0 common lane also contains the IOSF-SB logic for the + * Common Register Interface (CRI) ie. the DPIO registers. CRI clock + * must be running when any DPIO registers are accessed. + * + * In addition to having their own registers, the PHYs are also + * controlled through some dedicated signals from the display + * controller. These include PLL reference clock enable, PLL enable, + * and CRI clock selection, for example. * - * DPIO is VLV only. + * Eeach channel also has two splines (also called data lanes), and + * each spline is made up of one Physical Access Coding Sub-Layer + * (PCS) block and two TX lanes. So each channel has two PCS blocks + * and four TX lanes. The TX lanes are used as DP lanes or TMDS + * data/clock pairs depending on the output type. + * + * Additionally the PHY also contains an AUX lane with AUX blocks + * for each channel. This is used for DP AUX communication, but + * this fact isn't really relevant for the driver since AUX is + * controlled from the display controller side. No DPIO registers + * need to be accessed during AUX communication, + * + * Generally the common lane corresponds to the pipe and + * the spline (PCS/TX) correponds to the port. + * + * For dual channel PHY (VLV/CHV): + * + * pipe A == CMN/PLL/REF CH0 + * + * pipe B == CMN/PLL/REF CH1 + * + * port B == PCS/TX CH0 + * + * port C == PCS/TX CH1 + * + * This is especially important when we cross the streams + * ie. drive port B with pipe B, or port C with pipe A. + * + * For single channel PHY (CHV): + * + * pipe C == CMN/PLL/REF CH0 + * + * port D == PCS/TX CH0 + * + * Note: digital port B is DDI0, digital port C is DDI1, + * digital port D is DDI2 + */ +/* + * Dual channel PHY (VLV/CHV) + * --------------------------------- + * | CH0 | CH1 | + * | CMN/PLL/REF | CMN/PLL/REF | + * |---------------|---------------| Display PHY + * | PCS01 | PCS23 | PCS01 | PCS23 | + * |-------|-------|-------|-------| + * |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3| + * --------------------------------- + * | DDI0 | DDI1 | DP/HDMI ports + * --------------------------------- * - * Note: digital port B is DDI0, digital pot C is DDI1 + * Single channel PHY (CHV) + * ----------------- + * | CH0 | + * | CMN/PLL/REF | + * |---------------| Display PHY + * | PCS01 | PCS23 | + * |-------|-------| + * |TX0|TX1|TX2|TX3| + * ----------------- + * | DDI2 | DP/HDMI port + * ----------------- */ #define DPIO_DEVFN 0 -#define DPIO_OPCODE_REG_WRITE 1 -#define DPIO_OPCODE_REG_READ 0 #define DPIO_CTL (VLV_DISPLAY_BASE + 0x2110) #define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */ @@ -555,14 +736,29 @@ enum punit_power_well { #define DPIO_PCS_TX_LANE1_RESET (1<<7) #define VLV_PCS_DW0(ch) _PORT(ch, _VLV_PCS_DW0_CH0, _VLV_PCS_DW0_CH1) +#define _VLV_PCS01_DW0_CH0 0x200 +#define _VLV_PCS23_DW0_CH0 0x400 +#define _VLV_PCS01_DW0_CH1 0x2600 +#define _VLV_PCS23_DW0_CH1 0x2800 +#define VLV_PCS01_DW0(ch) _PORT(ch, _VLV_PCS01_DW0_CH0, _VLV_PCS01_DW0_CH1) +#define VLV_PCS23_DW0(ch) _PORT(ch, _VLV_PCS23_DW0_CH0, _VLV_PCS23_DW0_CH1) + #define _VLV_PCS_DW1_CH0 0x8204 #define _VLV_PCS_DW1_CH1 0x8404 +#define CHV_PCS_REQ_SOFTRESET_EN (1<<23) #define DPIO_PCS_CLK_CRI_RXEB_EIOS_EN (1<<22) #define DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN (1<<21) #define DPIO_PCS_CLK_DATAWIDTH_SHIFT (6) #define DPIO_PCS_CLK_SOFT_RESET (1<<5) #define VLV_PCS_DW1(ch) _PORT(ch, _VLV_PCS_DW1_CH0, _VLV_PCS_DW1_CH1) +#define _VLV_PCS01_DW1_CH0 0x204 +#define _VLV_PCS23_DW1_CH0 0x404 +#define _VLV_PCS01_DW1_CH1 0x2604 +#define _VLV_PCS23_DW1_CH1 0x2804 +#define VLV_PCS01_DW1(ch) _PORT(ch, _VLV_PCS01_DW1_CH0, _VLV_PCS01_DW1_CH1) +#define VLV_PCS23_DW1(ch) _PORT(ch, _VLV_PCS23_DW1_CH0, _VLV_PCS23_DW1_CH1) + #define _VLV_PCS_DW8_CH0 0x8220 #define _VLV_PCS_DW8_CH1 0x8420 #define VLV_PCS_DW8(ch) _PORT(ch, _VLV_PCS_DW8_CH0, _VLV_PCS_DW8_CH1) @@ -578,6 +774,19 @@ enum punit_power_well { #define _VLV_PCS_DW9_CH1 0x8424 #define VLV_PCS_DW9(ch) _PORT(ch, _VLV_PCS_DW9_CH0, _VLV_PCS_DW9_CH1) +#define _CHV_PCS_DW10_CH0 0x8228 +#define _CHV_PCS_DW10_CH1 0x8428 +#define DPIO_PCS_SWING_CALC_TX0_TX2 (1<<30) +#define DPIO_PCS_SWING_CALC_TX1_TX3 (1<<31) +#define CHV_PCS_DW10(ch) _PORT(ch, _CHV_PCS_DW10_CH0, _CHV_PCS_DW10_CH1) + +#define _VLV_PCS01_DW10_CH0 0x0228 +#define _VLV_PCS23_DW10_CH0 0x0428 +#define _VLV_PCS01_DW10_CH1 0x2628 +#define _VLV_PCS23_DW10_CH1 0x2828 +#define VLV_PCS01_DW10(port) _PORT(port, _VLV_PCS01_DW10_CH0, _VLV_PCS01_DW10_CH1) +#define VLV_PCS23_DW10(port) _PORT(port, _VLV_PCS23_DW10_CH0, _VLV_PCS23_DW10_CH1) + #define _VLV_PCS_DW11_CH0 0x822c #define _VLV_PCS_DW11_CH1 0x842c #define VLV_PCS_DW11(ch) _PORT(ch, _VLV_PCS_DW11_CH0, _VLV_PCS_DW11_CH1) @@ -596,14 +805,21 @@ enum punit_power_well { #define _VLV_TX_DW2_CH0 0x8288 #define _VLV_TX_DW2_CH1 0x8488 +#define DPIO_SWING_MARGIN_SHIFT 16 +#define DPIO_SWING_MARGIN_MASK (0xff << DPIO_SWING_MARGIN_SHIFT) +#define DPIO_UNIQ_TRANS_SCALE_SHIFT 8 #define VLV_TX_DW2(ch) _PORT(ch, _VLV_TX_DW2_CH0, _VLV_TX_DW2_CH1) #define _VLV_TX_DW3_CH0 0x828c #define _VLV_TX_DW3_CH1 0x848c +/* The following bit for CHV phy */ +#define DPIO_TX_UNIQ_TRANS_SCALE_EN (1<<27) #define VLV_TX_DW3(ch) _PORT(ch, _VLV_TX_DW3_CH0, _VLV_TX_DW3_CH1) #define _VLV_TX_DW4_CH0 0x8290 #define _VLV_TX_DW4_CH1 0x8490 +#define DPIO_SWING_DEEMPH9P5_SHIFT 24 +#define DPIO_SWING_DEEMPH9P5_MASK (0xff << DPIO_SWING_DEEMPH9P5_SHIFT) #define VLV_TX_DW4(ch) _PORT(ch, _VLV_TX_DW4_CH0, _VLV_TX_DW4_CH1) #define _VLV_TX3_DW4_CH0 0x690 @@ -623,6 +839,73 @@ enum punit_power_well { #define _VLV_TX_DW14_CH1 0x84b8 #define VLV_TX_DW14(ch) _PORT(ch, _VLV_TX_DW14_CH0, _VLV_TX_DW14_CH1) +/* CHV dpPhy registers */ +#define _CHV_PLL_DW0_CH0 0x8000 +#define _CHV_PLL_DW0_CH1 0x8180 +#define CHV_PLL_DW0(ch) _PIPE(ch, _CHV_PLL_DW0_CH0, _CHV_PLL_DW0_CH1) + +#define _CHV_PLL_DW1_CH0 0x8004 +#define _CHV_PLL_DW1_CH1 0x8184 +#define DPIO_CHV_N_DIV_SHIFT 8 +#define DPIO_CHV_M1_DIV_BY_2 (0 << 0) +#define CHV_PLL_DW1(ch) _PIPE(ch, _CHV_PLL_DW1_CH0, _CHV_PLL_DW1_CH1) + +#define _CHV_PLL_DW2_CH0 0x8008 +#define _CHV_PLL_DW2_CH1 0x8188 +#define CHV_PLL_DW2(ch) _PIPE(ch, _CHV_PLL_DW2_CH0, _CHV_PLL_DW2_CH1) + +#define _CHV_PLL_DW3_CH0 0x800c +#define _CHV_PLL_DW3_CH1 0x818c +#define DPIO_CHV_FRAC_DIV_EN (1 << 16) +#define DPIO_CHV_FIRST_MOD (0 << 8) +#define DPIO_CHV_SECOND_MOD (1 << 8) +#define DPIO_CHV_FEEDFWD_GAIN_SHIFT 0 +#define CHV_PLL_DW3(ch) _PIPE(ch, _CHV_PLL_DW3_CH0, _CHV_PLL_DW3_CH1) + +#define _CHV_PLL_DW6_CH0 0x8018 +#define _CHV_PLL_DW6_CH1 0x8198 +#define DPIO_CHV_GAIN_CTRL_SHIFT 16 +#define DPIO_CHV_INT_COEFF_SHIFT 8 +#define DPIO_CHV_PROP_COEFF_SHIFT 0 +#define CHV_PLL_DW6(ch) _PIPE(ch, _CHV_PLL_DW6_CH0, _CHV_PLL_DW6_CH1) + +#define _CHV_CMN_DW13_CH0 0x8134 +#define _CHV_CMN_DW0_CH1 0x8080 +#define DPIO_CHV_S1_DIV_SHIFT 21 +#define DPIO_CHV_P1_DIV_SHIFT 13 /* 3 bits */ +#define DPIO_CHV_P2_DIV_SHIFT 8 /* 5 bits */ +#define DPIO_CHV_K_DIV_SHIFT 4 +#define DPIO_PLL_FREQLOCK (1 << 1) +#define DPIO_PLL_LOCK (1 << 0) +#define CHV_CMN_DW13(ch) _PIPE(ch, _CHV_CMN_DW13_CH0, _CHV_CMN_DW0_CH1) + +#define _CHV_CMN_DW14_CH0 0x8138 +#define _CHV_CMN_DW1_CH1 0x8084 +#define DPIO_AFC_RECAL (1 << 14) +#define DPIO_DCLKP_EN (1 << 13) +#define CHV_CMN_DW14(ch) _PIPE(ch, _CHV_CMN_DW14_CH0, _CHV_CMN_DW1_CH1) + +#define CHV_CMN_DW30 0x8178 +#define DPIO_LRC_BYPASS (1 << 3) + +#define _TXLANE(ch, lane, offset) ((ch ? 0x2400 : 0) + \ + (lane) * 0x200 + (offset)) + +#define CHV_TX_DW0(ch, lane) _TXLANE(ch, lane, 0x80) +#define CHV_TX_DW1(ch, lane) _TXLANE(ch, lane, 0x84) +#define CHV_TX_DW2(ch, lane) _TXLANE(ch, lane, 0x88) +#define CHV_TX_DW3(ch, lane) _TXLANE(ch, lane, 0x8c) +#define CHV_TX_DW4(ch, lane) _TXLANE(ch, lane, 0x90) +#define CHV_TX_DW5(ch, lane) _TXLANE(ch, lane, 0x94) +#define CHV_TX_DW6(ch, lane) _TXLANE(ch, lane, 0x98) +#define CHV_TX_DW7(ch, lane) _TXLANE(ch, lane, 0x9c) +#define CHV_TX_DW8(ch, lane) _TXLANE(ch, lane, 0xa0) +#define CHV_TX_DW9(ch, lane) _TXLANE(ch, lane, 0xa4) +#define CHV_TX_DW10(ch, lane) _TXLANE(ch, lane, 0xa8) +#define CHV_TX_DW11(ch, lane) _TXLANE(ch, lane, 0xac) +#define DPIO_FRC_LATENCY_SHFIT 8 +#define CHV_TX_DW14(ch, lane) _TXLANE(ch, lane, 0xb8) +#define DPIO_UPAR_SHIFT 30 /* * Fence registers */ @@ -663,6 +946,7 @@ enum punit_power_well { #define RENDER_RING_BASE 0x02000 #define BSD_RING_BASE 0x04000 #define GEN6_BSD_RING_BASE 0x12000 +#define GEN8_BSD2_RING_BASE 0x1c000 #define VEBOX_RING_BASE 0x1a000 #define BLT_RING_BASE 0x22000 #define RING_TAIL(base) ((base)+0x30) @@ -688,9 +972,20 @@ enum punit_power_well { #define RING_MAX_IDLE(base) ((base)+0x54) #define RING_HWS_PGA(base) ((base)+0x80) #define RING_HWS_PGA_GEN6(base) ((base)+0x2080) -#define ARB_MODE 0x04030 + +#define GEN7_WR_WATERMARK 0x4028 +#define GEN7_GFX_PRIO_CTRL 0x402C +#define ARB_MODE 0x4030 #define ARB_MODE_SWIZZLE_SNB (1<<4) #define ARB_MODE_SWIZZLE_IVB (1<<5) +#define GEN7_GFX_PEND_TLB0 0x4034 +#define GEN7_GFX_PEND_TLB1 0x4038 +/* L3, CVS, ZTLB, RCC, CASC LRA min, max values */ +#define GEN7_LRA_LIMITS_BASE 0x403C +#define GEN7_LRA_LIMITS_REG_NUM 13 +#define GEN7_MEDIA_MAX_REQ_COUNT 0x4070 +#define GEN7_GFX_MAX_REQ_COUNT 0x4074 + #define GAMTARBMODE 0x04a08 #define ARB_MODE_BWGTLB_DISABLE (1<<9) #define ARB_MODE_SWIZZLE_BDW (1<<1) @@ -725,6 +1020,9 @@ enum punit_power_well { #define RING_WAIT_I8XX (1<<0) /* gen2, PRBx_HEAD */ #define RING_WAIT (1<<11) /* gen3+, PRBx_CTL */ #define RING_WAIT_SEMAPHORE (1<<10) /* gen6+ */ + +#define GEN7_TLB_RD_ADDR 0x4700 + #if 0 #define PRB0_TAIL 0x02030 #define PRB0_HEAD 0x02034 @@ -748,6 +1046,7 @@ enum punit_power_well { #define RING_INSTDONE(base) ((base)+0x6c) #define RING_INSTPS(base) ((base)+0x70) #define RING_DMA_FADD(base) ((base)+0x78) +#define RING_DMA_FADD_UDW(base) ((base)+0x60) /* gen8+ */ #define RING_INSTPM(base) ((base)+0xc0) #define RING_MI_MODE(base) ((base)+0x9c) #define INSTPS 0x02070 /* 965+ only */ @@ -842,21 +1141,26 @@ enum punit_power_well { #define GFX_MODE_GEN7 0x0229c #define RING_MODE_GEN7(ring) ((ring)->mmio_base+0x29c) #define GFX_RUN_LIST_ENABLE (1<<15) -#define GFX_TLB_INVALIDATE_ALWAYS (1<<13) +#define GFX_TLB_INVALIDATE_EXPLICIT (1<<13) #define GFX_SURFACE_FAULT_ENABLE (1<<12) #define GFX_REPLAY_MODE (1<<11) #define GFX_PSMI_GRANULARITY (1<<10) #define GFX_PPGTT_ENABLE (1<<9) #define VLV_DISPLAY_BASE 0x180000 +#define VLV_MIPI_BASE VLV_DISPLAY_BASE +#define VLV_GU_CTL0 (VLV_DISPLAY_BASE + 0x2030) +#define VLV_GU_CTL1 (VLV_DISPLAY_BASE + 0x2034) #define SCPD0 0x0209c /* 915+ only */ #define IER 0x020a0 #define IIR 0x020a4 #define IMR 0x020a8 #define ISR 0x020ac #define VLV_GUNIT_CLOCK_GATE (VLV_DISPLAY_BASE + 0x2060) +#define GINT_DIS (1<<22) #define GCFG_DIS (1<<8) +#define VLV_GUNIT_CLOCK_GATE2 (VLV_DISPLAY_BASE + 0x2064) #define VLV_IIR_RW (VLV_DISPLAY_BASE + 0x2084) #define VLV_IER (VLV_DISPLAY_BASE + 0x20a0) #define VLV_IIR (VLV_DISPLAY_BASE + 0x20a4) @@ -875,7 +1179,7 @@ enum punit_power_well { #define I915_ERROR_INSTRUCTION (1<<0) #define INSTPM 0x020c0 #define INSTPM_SELF_EN (1<<12) /* 915GM only */ -#define INSTPM_AGPBUSY_DIS (1<<11) /* gen3: when disabled, pending interrupts +#define INSTPM_AGPBUSY_INT_EN (1<<11) /* gen3: when disabled, pending interrupts will not assert AGPBUSY# and will only be delivered when out of C3. */ #define INSTPM_FORCE_ORDERING (1<<7) /* GEN6+ */ @@ -956,6 +1260,10 @@ enum punit_power_well { #define MI_ARB_DISPLAY_PRIORITY_A_B (0 << 0) /* display A > display B */ #define MI_ARB_DISPLAY_PRIORITY_B_A (1 << 0) /* display B > display A */ +#define MI_STATE 0x020e4 /* gen2 only */ +#define MI_AGPBUSY_INT_EN (1 << 1) /* 85x only */ +#define MI_AGPBUSY_830_MODE (1 << 0) /* 85x only */ + #define CACHE_MODE_0 0x02120 /* 915+ only */ #define CM0_PIPELINED_RENDER_FLUSH_DISABLE (1<<8) #define CM0_IZ_OPT_DISABLE (1<<6) @@ -973,6 +1281,7 @@ enum punit_power_well { #define ECO_FLIP_DONE (1<<0) #define CACHE_MODE_0_GEN7 0x7000 /* IVB+ */ +#define RC_OP_FLUSH_ENABLE (1<<0) #define HIZ_RAW_STALL_OPT_DISABLE (1<<2) #define CACHE_MODE_1 0x7004 /* IVB+ */ #define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6) @@ -984,6 +1293,7 @@ enum punit_power_well { #define GEN6_RC_SLEEP_PSMI_CONTROL 0x2050 #define GEN8_RC_SEMA_IDLE_MSG_DISABLE (1 << 12) +#define GEN8_FF_DOP_CLOCK_GATE_DISABLE (1<<10) #define GEN6_BSD_SLEEP_PSMI_CONTROL 0x12050 #define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0) @@ -1024,24 +1334,43 @@ enum punit_power_well { /* These are all the "old" interrupts */ #define ILK_BSD_USER_INTERRUPT (1<<5) + +#define I915_PM_INTERRUPT (1<<31) +#define I915_ISP_INTERRUPT (1<<22) +#define I915_LPE_PIPE_B_INTERRUPT (1<<21) +#define I915_LPE_PIPE_A_INTERRUPT (1<<20) +#define I915_MIPIB_INTERRUPT (1<<19) +#define I915_MIPIA_INTERRUPT (1<<18) #define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18) #define I915_DISPLAY_PORT_INTERRUPT (1<<17) +#define I915_DISPLAY_PIPE_C_HBLANK_INTERRUPT (1<<16) +#define I915_MASTER_ERROR_INTERRUPT (1<<15) #define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) +#define I915_DISPLAY_PIPE_B_HBLANK_INTERRUPT (1<<14) #define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */ +#define I915_DISPLAY_PIPE_A_HBLANK_INTERRUPT (1<<13) #define I915_HWB_OOM_INTERRUPT (1<<13) +#define I915_LPE_PIPE_C_INTERRUPT (1<<12) #define I915_SYNC_STATUS_INTERRUPT (1<<12) +#define I915_MISC_INTERRUPT (1<<11) #define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11) +#define I915_DISPLAY_PIPE_C_VBLANK_INTERRUPT (1<<10) #define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10) +#define I915_DISPLAY_PIPE_C_EVENT_INTERRUPT (1<<9) #define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9) +#define I915_DISPLAY_PIPE_C_DPBM_INTERRUPT (1<<8) #define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8) #define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7) #define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6) #define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5) #define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4) +#define I915_DISPLAY_PIPE_A_DPBM_INTERRUPT (1<<3) +#define I915_DISPLAY_PIPE_B_DPBM_INTERRUPT (1<<2) #define I915_DEBUG_INTERRUPT (1<<2) +#define I915_WINVALID_INTERRUPT (1<<1) #define I915_USER_INTERRUPT (1<<1) #define I915_ASLE_INTERRUPT (1<<0) -#define I915_BSD_USER_INTERRUPT (1 << 25) +#define I915_BSD_USER_INTERRUPT (1<<25) #define GEN6_BSD_RNCID 0x12198 @@ -1198,6 +1527,7 @@ enum punit_power_well { #define GMBUS_PORT_SSC 1 #define GMBUS_PORT_VGADDC 2 #define GMBUS_PORT_PANEL 3 +#define GMBUS_PORT_DPD_CHV 3 /* HDMID_CHV */ #define GMBUS_PORT_DPC 4 /* HDMIC */ #define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */ #define GMBUS_PORT_DPD 6 /* HDMID */ @@ -1239,6 +1569,7 @@ enum punit_power_well { */ #define DPLL_A_OFFSET 0x6014 #define DPLL_B_OFFSET 0x6018 +#define CHV_DPLL_C_OFFSET 0x6030 #define DPLL(pipe) (dev_priv->info.dpll_offsets[pipe] + \ dev_priv->info.display_mmio_offset) @@ -1273,10 +1604,23 @@ enum punit_power_well { #define DPLL_LOCK_VLV (1<<15) #define DPLL_INTEGRATED_CRI_CLK_VLV (1<<14) #define DPLL_INTEGRATED_CLOCK_VLV (1<<13) +#define DPLL_SSC_REF_CLOCK_CHV (1<<13) #define DPLL_PORTC_READY_MASK (0xf << 4) #define DPLL_PORTB_READY_MASK (0xf) #define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 + +/* Additional CHV pll/phy registers */ +#define DPIO_PHY_STATUS (VLV_DISPLAY_BASE + 0x6240) +#define DPLL_PORTD_READY_MASK (0xf) +#define DISPLAY_PHY_CONTROL (VLV_DISPLAY_BASE + 0x60100) +#define PHY_COM_LANE_RESET_DEASSERT(phy, val) \ + ((phy == DPIO_PHY0) ? (val | 1) : (val | 2)) +#define PHY_COM_LANE_RESET_ASSERT(phy, val) \ + ((phy == DPIO_PHY0) ? (val & ~1) : (val & ~2)) +#define DISPLAY_PHY_STATUS (VLV_DISPLAY_BASE + 0x60104) +#define PHY_POWERGOOD(phy) ((phy == DPIO_PHY0) ? (1<<31) : (1<<30)) + /* * The i830 generation, in LVDS mode, defines P1 as the bit number set within * this field (only one bit may be set). @@ -1317,6 +1661,7 @@ enum punit_power_well { #define DPLL_A_MD_OFFSET 0x601c /* 965+ only */ #define DPLL_B_MD_OFFSET 0x6020 /* 965+ only */ +#define CHV_DPLL_C_MD_OFFSET 0x603c #define DPLL_MD(pipe) (dev_priv->info.dpll_md_offsets[pipe] + \ dev_priv->info.display_mmio_offset) @@ -1416,7 +1761,7 @@ enum punit_power_well { # define DPIOUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 915-945 */ # define OVFUNIT_CLOCK_GATE_DISABLE (1 << 5) # define OVBUNIT_CLOCK_GATE_DISABLE (1 << 4) -/** +/* * This bit must be set on the 830 to prevent hangs when turning off the * overlay scaler. */ @@ -1436,12 +1781,12 @@ enum punit_power_well { # define COLOR_CALCULATOR_CLOCK_GATE_DISABLE (1 << 7) # define MOTION_COMP_CLOCK_GATE_DISABLE (1 << 6) # define MAG_CLOCK_GATE_DISABLE (1 << 5) -/** This bit must be unset on 855,865 */ +/* This bit must be unset on 855,865 */ # define MECI_CLOCK_GATE_DISABLE (1 << 4) # define DCMP_CLOCK_GATE_DISABLE (1 << 3) # define MEC_CLOCK_GATE_DISABLE (1 << 2) # define MECO_CLOCK_GATE_DISABLE (1 << 1) -/** This bit must be set on 855,865. */ +/* This bit must be set on 855,865. */ # define SV_CLOCK_GATE_DISABLE (1 << 0) # define I915_MPEG_CLOCK_GATE_DISABLE (1 << 16) # define I915_VLD_IP_PR_CLOCK_GATE_DISABLE (1 << 15) @@ -1462,14 +1807,14 @@ enum punit_power_well { # define I915_BY_CLOCK_GATE_DISABLE (1 << 0) # define I965_RCZ_CLOCK_GATE_DISABLE (1 << 30) -/** This bit must always be set on 965G/965GM */ +/* This bit must always be set on 965G/965GM */ # define I965_RCC_CLOCK_GATE_DISABLE (1 << 29) # define I965_RCPB_CLOCK_GATE_DISABLE (1 << 28) # define I965_DAP_CLOCK_GATE_DISABLE (1 << 27) # define I965_ROC_CLOCK_GATE_DISABLE (1 << 26) # define I965_GW_CLOCK_GATE_DISABLE (1 << 25) # define I965_TD_CLOCK_GATE_DISABLE (1 << 24) -/** This bit must always be set on 965G */ +/* This bit must always be set on 965G */ # define I965_ISC_CLOCK_GATE_DISABLE (1 << 23) # define I965_IC_CLOCK_GATE_DISABLE (1 << 22) # define I965_EU_CLOCK_GATE_DISABLE (1 << 21) @@ -1494,6 +1839,10 @@ enum punit_power_well { #define VF_UNIT_CLOCK_GATE_DISABLE (1 << 9) #define GS_UNIT_CLOCK_GATE_DISABLE (1 << 7) #define CL_UNIT_CLOCK_GATE_DISABLE (1 << 6) + +#define VDECCLK_GATE_D 0x620C /* g4x only */ +#define VCP_UNIT_CLOCK_GATE_DISABLE (1 << 4) + #define RAMCLK_GATE_D 0x6210 /* CRL only */ #define DEUC 0x6214 /* CRL only */ @@ -1513,6 +1862,7 @@ enum punit_power_well { */ #define PALETTE_A_OFFSET 0xa000 #define PALETTE_B_OFFSET 0xa800 +#define CHV_PALETTE_C_OFFSET 0xc000 #define PALETTE(pipe) (dev_priv->info.palette_offsets[pipe] + \ dev_priv->info.display_mmio_offset) @@ -1535,7 +1885,7 @@ enum punit_power_well { /* Memory controller frequency in MCHBAR for Haswell (possible SNB+) */ #define DCLK (MCHBAR_MIRROR_BASE_SNB + 0x5e04) -/** 915-945 and GM965 MCH register controlling DRAM channel access */ +/* 915-945 and GM965 MCH register controlling DRAM channel access */ #define DCC 0x10200 #define DCC_ADDRESSING_MODE_SINGLE_CHANNEL (0 << 0) #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC (1 << 0) @@ -1544,15 +1894,15 @@ enum punit_power_well { #define DCC_CHANNEL_XOR_DISABLE (1 << 10) #define DCC_CHANNEL_XOR_BIT_17 (1 << 9) -/** Pineview MCH register contains DDR3 setting */ +/* Pineview MCH register contains DDR3 setting */ #define CSHRDDR3CTL 0x101a8 #define CSHRDDR3CTL_DDR3 (1 << 2) -/** 965 MCH register controlling DRAM channel configuration */ +/* 965 MCH register controlling DRAM channel configuration */ #define C0DRB3 0x10206 #define C1DRB3 0x10606 -/** snb MCH registers for reading the DRAM channel configuration */ +/* snb MCH registers for reading the DRAM channel configuration */ #define MAD_DIMM_C0 (MCHBAR_MIRROR_BASE_SNB + 0x5004) #define MAD_DIMM_C1 (MCHBAR_MIRROR_BASE_SNB + 0x5008) #define MAD_DIMM_C2 (MCHBAR_MIRROR_BASE_SNB + 0x500C) @@ -1574,7 +1924,7 @@ enum punit_power_well { #define MAD_DIMM_A_SIZE_SHIFT 0 #define MAD_DIMM_A_SIZE_MASK (0xff << MAD_DIMM_A_SIZE_SHIFT) -/** snb MCH registers for priority tuning */ +/* snb MCH registers for priority tuning */ #define MCH_SSKPD (MCHBAR_MIRROR_BASE_SNB + 0x5d10) #define MCH_SSKPD_WM0_MASK 0x3f #define MCH_SSKPD_WM0_VAL 0xc @@ -2002,6 +2352,7 @@ enum punit_power_well { #define TRANSCODER_A_OFFSET 0x60000 #define TRANSCODER_B_OFFSET 0x61000 #define TRANSCODER_C_OFFSET 0x62000 +#define CHV_TRANSCODER_C_OFFSET 0x63000 #define TRANSCODER_EDP_OFFSET 0x6f000 #define _TRANSCODER2(pipe, reg) (dev_priv->info.trans_offsets[(pipe)] - \ @@ -2226,6 +2577,7 @@ enum punit_power_well { #define GEN3_SDVOC 0x61160 #define GEN4_HDMIB GEN3_SDVOB #define GEN4_HDMIC GEN3_SDVOC +#define CHV_HDMID 0x6116C #define PCH_SDVOB 0xe1140 #define PCH_HDMIB PCH_SDVOB #define PCH_HDMIC 0xe1150 @@ -2246,7 +2598,7 @@ enum punit_power_well { #define SDVO_PIPE_B_SELECT (1 << 30) #define SDVO_STALL_SELECT (1 << 29) #define SDVO_INTERRUPT_ENABLE (1 << 26) -/** +/* * 915G/GM SDVO pixel multiplier. * Programmed value is multiplier - 1, up to 5x. * \sa DPLL_MD_UDI_MULTIPLIER_MASK @@ -2286,6 +2638,10 @@ enum punit_power_well { #define SDVO_PIPE_SEL_CPT(pipe) ((pipe) << 29) #define SDVO_PIPE_SEL_MASK_CPT (3 << 29) +/* CHV SDVO/HDMI bits: */ +#define SDVO_PIPE_SEL_CHV(pipe) ((pipe) << 24) +#define SDVO_PIPE_SEL_MASK_CHV (3 << 24) + /* DVO port control */ #define DVOA 0x61120 @@ -2556,65 +2912,65 @@ enum punit_power_well { /* TV port control */ #define TV_CTL 0x68000 -/** Enables the TV encoder */ +/* Enables the TV encoder */ # define TV_ENC_ENABLE (1 << 31) -/** Sources the TV encoder input from pipe B instead of A. */ +/* Sources the TV encoder input from pipe B instead of A. */ # define TV_ENC_PIPEB_SELECT (1 << 30) -/** Outputs composite video (DAC A only) */ +/* Outputs composite video (DAC A only) */ # define TV_ENC_OUTPUT_COMPOSITE (0 << 28) -/** Outputs SVideo video (DAC B/C) */ +/* Outputs SVideo video (DAC B/C) */ # define TV_ENC_OUTPUT_SVIDEO (1 << 28) -/** Outputs Component video (DAC A/B/C) */ +/* Outputs Component video (DAC A/B/C) */ # define TV_ENC_OUTPUT_COMPONENT (2 << 28) -/** Outputs Composite and SVideo (DAC A/B/C) */ +/* Outputs Composite and SVideo (DAC A/B/C) */ # define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28) # define TV_TRILEVEL_SYNC (1 << 21) -/** Enables slow sync generation (945GM only) */ +/* Enables slow sync generation (945GM only) */ # define TV_SLOW_SYNC (1 << 20) -/** Selects 4x oversampling for 480i and 576p */ +/* Selects 4x oversampling for 480i and 576p */ # define TV_OVERSAMPLE_4X (0 << 18) -/** Selects 2x oversampling for 720p and 1080i */ +/* Selects 2x oversampling for 720p and 1080i */ # define TV_OVERSAMPLE_2X (1 << 18) -/** Selects no oversampling for 1080p */ +/* Selects no oversampling for 1080p */ # define TV_OVERSAMPLE_NONE (2 << 18) -/** Selects 8x oversampling */ +/* Selects 8x oversampling */ # define TV_OVERSAMPLE_8X (3 << 18) -/** Selects progressive mode rather than interlaced */ +/* Selects progressive mode rather than interlaced */ # define TV_PROGRESSIVE (1 << 17) -/** Sets the colorburst to PAL mode. Required for non-M PAL modes. */ +/* Sets the colorburst to PAL mode. Required for non-M PAL modes. */ # define TV_PAL_BURST (1 << 16) -/** Field for setting delay of Y compared to C */ +/* Field for setting delay of Y compared to C */ # define TV_YC_SKEW_MASK (7 << 12) -/** Enables a fix for 480p/576p standard definition modes on the 915GM only */ +/* Enables a fix for 480p/576p standard definition modes on the 915GM only */ # define TV_ENC_SDP_FIX (1 << 11) -/** +/* * Enables a fix for the 915GM only. * * Not sure what it does. */ # define TV_ENC_C0_FIX (1 << 10) -/** Bits that must be preserved by software */ +/* Bits that must be preserved by software */ # define TV_CTL_SAVE ((1 << 11) | (3 << 9) | (7 << 6) | 0xf) # define TV_FUSE_STATE_MASK (3 << 4) -/** Read-only state that reports all features enabled */ +/* Read-only state that reports all features enabled */ # define TV_FUSE_STATE_ENABLED (0 << 4) -/** Read-only state that reports that Macrovision is disabled in hardware*/ +/* Read-only state that reports that Macrovision is disabled in hardware*/ # define TV_FUSE_STATE_NO_MACROVISION (1 << 4) -/** Read-only state that reports that TV-out is disabled in hardware. */ +/* Read-only state that reports that TV-out is disabled in hardware. */ # define TV_FUSE_STATE_DISABLED (2 << 4) -/** Normal operation */ +/* Normal operation */ # define TV_TEST_MODE_NORMAL (0 << 0) -/** Encoder test pattern 1 - combo pattern */ +/* Encoder test pattern 1 - combo pattern */ # define TV_TEST_MODE_PATTERN_1 (1 << 0) -/** Encoder test pattern 2 - full screen vertical 75% color bars */ +/* Encoder test pattern 2 - full screen vertical 75% color bars */ # define TV_TEST_MODE_PATTERN_2 (2 << 0) -/** Encoder test pattern 3 - full screen horizontal 75% color bars */ +/* Encoder test pattern 3 - full screen horizontal 75% color bars */ # define TV_TEST_MODE_PATTERN_3 (3 << 0) -/** Encoder test pattern 4 - random noise */ +/* Encoder test pattern 4 - random noise */ # define TV_TEST_MODE_PATTERN_4 (4 << 0) -/** Encoder test pattern 5 - linear color ramps */ +/* Encoder test pattern 5 - linear color ramps */ # define TV_TEST_MODE_PATTERN_5 (5 << 0) -/** +/* * This test mode forces the DACs to 50% of full output. * * This is used for load detection in combination with TVDAC_SENSE_MASK @@ -2624,35 +2980,35 @@ enum punit_power_well { #define TV_DAC 0x68004 # define TV_DAC_SAVE 0x00ffff00 -/** +/* * Reports that DAC state change logic has reported change (RO). * * This gets cleared when TV_DAC_STATE_EN is cleared */ # define TVDAC_STATE_CHG (1 << 31) # define TVDAC_SENSE_MASK (7 << 28) -/** Reports that DAC A voltage is above the detect threshold */ +/* Reports that DAC A voltage is above the detect threshold */ # define TVDAC_A_SENSE (1 << 30) -/** Reports that DAC B voltage is above the detect threshold */ +/* Reports that DAC B voltage is above the detect threshold */ # define TVDAC_B_SENSE (1 << 29) -/** Reports that DAC C voltage is above the detect threshold */ +/* Reports that DAC C voltage is above the detect threshold */ # define TVDAC_C_SENSE (1 << 28) -/** +/* * Enables DAC state detection logic, for load-based TV detection. * * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set * to off, for load detection to work. */ # define TVDAC_STATE_CHG_EN (1 << 27) -/** Sets the DAC A sense value to high */ +/* Sets the DAC A sense value to high */ # define TVDAC_A_SENSE_CTL (1 << 26) -/** Sets the DAC B sense value to high */ +/* Sets the DAC B sense value to high */ # define TVDAC_B_SENSE_CTL (1 << 25) -/** Sets the DAC C sense value to high */ +/* Sets the DAC C sense value to high */ # define TVDAC_C_SENSE_CTL (1 << 24) -/** Overrides the ENC_ENABLE and DAC voltage levels */ +/* Overrides the ENC_ENABLE and DAC voltage levels */ # define DAC_CTL_OVERRIDE (1 << 7) -/** Sets the slew rate. Must be preserved in software */ +/* Sets the slew rate. Must be preserved in software */ # define ENC_TVDAC_SLEW_FAST (1 << 6) # define DAC_A_1_3_V (0 << 4) # define DAC_A_1_1_V (1 << 4) @@ -2667,7 +3023,7 @@ enum punit_power_well { # define DAC_C_0_7_V (2 << 0) # define DAC_C_MASK (3 << 0) -/** +/* * CSC coefficients are stored in a floating point format with 9 bits of * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n, * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with @@ -2682,7 +3038,7 @@ enum punit_power_well { #define TV_CSC_Y2 0x68014 # define TV_BY_MASK 0x07ff0000 # define TV_BY_SHIFT 16 -/** +/* * Y attenuation for component video. * * Stored in 1.9 fixed point. @@ -2699,7 +3055,7 @@ enum punit_power_well { #define TV_CSC_U2 0x6801c # define TV_BU_MASK 0x07ff0000 # define TV_BU_SHIFT 16 -/** +/* * U attenuation for component video. * * Stored in 1.9 fixed point. @@ -2716,7 +3072,7 @@ enum punit_power_well { #define TV_CSC_V2 0x68024 # define TV_BV_MASK 0x07ff0000 # define TV_BV_SHIFT 16 -/** +/* * V attenuation for component video. * * Stored in 1.9 fixed point. @@ -2725,74 +3081,74 @@ enum punit_power_well { # define TV_AV_SHIFT 0 #define TV_CLR_KNOBS 0x68028 -/** 2s-complement brightness adjustment */ +/* 2s-complement brightness adjustment */ # define TV_BRIGHTNESS_MASK 0xff000000 # define TV_BRIGHTNESS_SHIFT 24 -/** Contrast adjustment, as a 2.6 unsigned floating point number */ +/* Contrast adjustment, as a 2.6 unsigned floating point number */ # define TV_CONTRAST_MASK 0x00ff0000 # define TV_CONTRAST_SHIFT 16 -/** Saturation adjustment, as a 2.6 unsigned floating point number */ +/* Saturation adjustment, as a 2.6 unsigned floating point number */ # define TV_SATURATION_MASK 0x0000ff00 # define TV_SATURATION_SHIFT 8 -/** Hue adjustment, as an integer phase angle in degrees */ +/* Hue adjustment, as an integer phase angle in degrees */ # define TV_HUE_MASK 0x000000ff # define TV_HUE_SHIFT 0 #define TV_CLR_LEVEL 0x6802c -/** Controls the DAC level for black */ +/* Controls the DAC level for black */ # define TV_BLACK_LEVEL_MASK 0x01ff0000 # define TV_BLACK_LEVEL_SHIFT 16 -/** Controls the DAC level for blanking */ +/* Controls the DAC level for blanking */ # define TV_BLANK_LEVEL_MASK 0x000001ff # define TV_BLANK_LEVEL_SHIFT 0 #define TV_H_CTL_1 0x68030 -/** Number of pixels in the hsync. */ +/* Number of pixels in the hsync. */ # define TV_HSYNC_END_MASK 0x1fff0000 # define TV_HSYNC_END_SHIFT 16 -/** Total number of pixels minus one in the line (display and blanking). */ +/* Total number of pixels minus one in the line (display and blanking). */ # define TV_HTOTAL_MASK 0x00001fff # define TV_HTOTAL_SHIFT 0 #define TV_H_CTL_2 0x68034 -/** Enables the colorburst (needed for non-component color) */ +/* Enables the colorburst (needed for non-component color) */ # define TV_BURST_ENA (1 << 31) -/** Offset of the colorburst from the start of hsync, in pixels minus one. */ +/* Offset of the colorburst from the start of hsync, in pixels minus one. */ # define TV_HBURST_START_SHIFT 16 # define TV_HBURST_START_MASK 0x1fff0000 -/** Length of the colorburst */ +/* Length of the colorburst */ # define TV_HBURST_LEN_SHIFT 0 # define TV_HBURST_LEN_MASK 0x0001fff #define TV_H_CTL_3 0x68038 -/** End of hblank, measured in pixels minus one from start of hsync */ +/* End of hblank, measured in pixels minus one from start of hsync */ # define TV_HBLANK_END_SHIFT 16 # define TV_HBLANK_END_MASK 0x1fff0000 -/** Start of hblank, measured in pixels minus one from start of hsync */ +/* Start of hblank, measured in pixels minus one from start of hsync */ # define TV_HBLANK_START_SHIFT 0 # define TV_HBLANK_START_MASK 0x0001fff #define TV_V_CTL_1 0x6803c -/** XXX */ +/* XXX */ # define TV_NBR_END_SHIFT 16 # define TV_NBR_END_MASK 0x07ff0000 -/** XXX */ +/* XXX */ # define TV_VI_END_F1_SHIFT 8 # define TV_VI_END_F1_MASK 0x00003f00 -/** XXX */ +/* XXX */ # define TV_VI_END_F2_SHIFT 0 # define TV_VI_END_F2_MASK 0x0000003f #define TV_V_CTL_2 0x68040 -/** Length of vsync, in half lines */ +/* Length of vsync, in half lines */ # define TV_VSYNC_LEN_MASK 0x07ff0000 # define TV_VSYNC_LEN_SHIFT 16 -/** Offset of the start of vsync in field 1, measured in one less than the +/* Offset of the start of vsync in field 1, measured in one less than the * number of half lines. */ # define TV_VSYNC_START_F1_MASK 0x00007f00 # define TV_VSYNC_START_F1_SHIFT 8 -/** +/* * Offset of the start of vsync in field 2, measured in one less than the * number of half lines. */ @@ -2800,17 +3156,17 @@ enum punit_power_well { # define TV_VSYNC_START_F2_SHIFT 0 #define TV_V_CTL_3 0x68044 -/** Enables generation of the equalization signal */ +/* Enables generation of the equalization signal */ # define TV_EQUAL_ENA (1 << 31) -/** Length of vsync, in half lines */ +/* Length of vsync, in half lines */ # define TV_VEQ_LEN_MASK 0x007f0000 # define TV_VEQ_LEN_SHIFT 16 -/** Offset of the start of equalization in field 1, measured in one less than +/* Offset of the start of equalization in field 1, measured in one less than * the number of half lines. */ # define TV_VEQ_START_F1_MASK 0x0007f00 # define TV_VEQ_START_F1_SHIFT 8 -/** +/* * Offset of the start of equalization in field 2, measured in one less than * the number of half lines. */ @@ -2818,13 +3174,13 @@ enum punit_power_well { # define TV_VEQ_START_F2_SHIFT 0 #define TV_V_CTL_4 0x68048 -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F1_MASK 0x003f0000 # define TV_VBURST_START_F1_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ @@ -2832,13 +3188,13 @@ enum punit_power_well { # define TV_VBURST_END_F1_SHIFT 0 #define TV_V_CTL_5 0x6804c -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F2_MASK 0x003f0000 # define TV_VBURST_START_F2_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ @@ -2846,13 +3202,13 @@ enum punit_power_well { # define TV_VBURST_END_F2_SHIFT 0 #define TV_V_CTL_6 0x68050 -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F3_MASK 0x003f0000 # define TV_VBURST_START_F3_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ @@ -2860,13 +3216,13 @@ enum punit_power_well { # define TV_VBURST_END_F3_SHIFT 0 #define TV_V_CTL_7 0x68054 -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F4_MASK 0x003f0000 # define TV_VBURST_START_F4_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ @@ -2874,56 +3230,56 @@ enum punit_power_well { # define TV_VBURST_END_F4_SHIFT 0 #define TV_SC_CTL_1 0x68060 -/** Turns on the first subcarrier phase generation DDA */ +/* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA1_EN (1 << 31) -/** Turns on the first subcarrier phase generation DDA */ +/* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA2_EN (1 << 30) -/** Turns on the first subcarrier phase generation DDA */ +/* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA3_EN (1 << 29) -/** Sets the subcarrier DDA to reset frequency every other field */ +/* Sets the subcarrier DDA to reset frequency every other field */ # define TV_SC_RESET_EVERY_2 (0 << 24) -/** Sets the subcarrier DDA to reset frequency every fourth field */ +/* Sets the subcarrier DDA to reset frequency every fourth field */ # define TV_SC_RESET_EVERY_4 (1 << 24) -/** Sets the subcarrier DDA to reset frequency every eighth field */ +/* Sets the subcarrier DDA to reset frequency every eighth field */ # define TV_SC_RESET_EVERY_8 (2 << 24) -/** Sets the subcarrier DDA to never reset the frequency */ +/* Sets the subcarrier DDA to never reset the frequency */ # define TV_SC_RESET_NEVER (3 << 24) -/** Sets the peak amplitude of the colorburst.*/ +/* Sets the peak amplitude of the colorburst.*/ # define TV_BURST_LEVEL_MASK 0x00ff0000 # define TV_BURST_LEVEL_SHIFT 16 -/** Sets the increment of the first subcarrier phase generation DDA */ +/* Sets the increment of the first subcarrier phase generation DDA */ # define TV_SCDDA1_INC_MASK 0x00000fff # define TV_SCDDA1_INC_SHIFT 0 #define TV_SC_CTL_2 0x68064 -/** Sets the rollover for the second subcarrier phase generation DDA */ +/* Sets the rollover for the second subcarrier phase generation DDA */ # define TV_SCDDA2_SIZE_MASK 0x7fff0000 # define TV_SCDDA2_SIZE_SHIFT 16 -/** Sets the increent of the second subcarrier phase generation DDA */ +/* Sets the increent of the second subcarrier phase generation DDA */ # define TV_SCDDA2_INC_MASK 0x00007fff # define TV_SCDDA2_INC_SHIFT 0 #define TV_SC_CTL_3 0x68068 -/** Sets the rollover for the third subcarrier phase generation DDA */ +/* Sets the rollover for the third subcarrier phase generation DDA */ # define TV_SCDDA3_SIZE_MASK 0x7fff0000 # define TV_SCDDA3_SIZE_SHIFT 16 -/** Sets the increent of the third subcarrier phase generation DDA */ +/* Sets the increent of the third subcarrier phase generation DDA */ # define TV_SCDDA3_INC_MASK 0x00007fff # define TV_SCDDA3_INC_SHIFT 0 #define TV_WIN_POS 0x68070 -/** X coordinate of the display from the start of horizontal active */ +/* X coordinate of the display from the start of horizontal active */ # define TV_XPOS_MASK 0x1fff0000 # define TV_XPOS_SHIFT 16 -/** Y coordinate of the display from the start of vertical active (NBR) */ +/* Y coordinate of the display from the start of vertical active (NBR) */ # define TV_YPOS_MASK 0x00000fff # define TV_YPOS_SHIFT 0 #define TV_WIN_SIZE 0x68074 -/** Horizontal size of the display window, measured in pixels*/ +/* Horizontal size of the display window, measured in pixels*/ # define TV_XSIZE_MASK 0x1fff0000 # define TV_XSIZE_SHIFT 16 -/** +/* * Vertical size of the display window, measured in pixels. * * Must be even for interlaced modes. @@ -2932,28 +3288,28 @@ enum punit_power_well { # define TV_YSIZE_SHIFT 0 #define TV_FILTER_CTL_1 0x68080 -/** +/* * Enables automatic scaling calculation. * * If set, the rest of the registers are ignored, and the calculated values can * be read back from the register. */ # define TV_AUTO_SCALE (1 << 31) -/** +/* * Disables the vertical filter. * * This is required on modes more than 1024 pixels wide */ # define TV_V_FILTER_BYPASS (1 << 29) -/** Enables adaptive vertical filtering */ +/* Enables adaptive vertical filtering */ # define TV_VADAPT (1 << 28) # define TV_VADAPT_MODE_MASK (3 << 26) -/** Selects the least adaptive vertical filtering mode */ +/* Selects the least adaptive vertical filtering mode */ # define TV_VADAPT_MODE_LEAST (0 << 26) -/** Selects the moderately adaptive vertical filtering mode */ +/* Selects the moderately adaptive vertical filtering mode */ # define TV_VADAPT_MODE_MODERATE (1 << 26) -/** Selects the most adaptive vertical filtering mode */ +/* Selects the most adaptive vertical filtering mode */ # define TV_VADAPT_MODE_MOST (3 << 26) -/** +/* * Sets the horizontal scaling factor. * * This should be the fractional part of the horizontal scaling factor divided @@ -2965,14 +3321,14 @@ enum punit_power_well { # define TV_HSCALE_FRAC_SHIFT 0 #define TV_FILTER_CTL_2 0x68084 -/** +/* * Sets the integer part of the 3.15 fixed-point vertical scaling factor. * * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1) */ # define TV_VSCALE_INT_MASK 0x00038000 # define TV_VSCALE_INT_SHIFT 15 -/** +/* * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. * * \sa TV_VSCALE_INT_MASK @@ -2981,7 +3337,7 @@ enum punit_power_well { # define TV_VSCALE_FRAC_SHIFT 0 #define TV_FILTER_CTL_3 0x68088 -/** +/* * Sets the integer part of the 3.15 fixed-point vertical scaling factor. * * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1)) @@ -2990,7 +3346,7 @@ enum punit_power_well { */ # define TV_VSCALE_IP_INT_MASK 0x00038000 # define TV_VSCALE_IP_INT_SHIFT 15 -/** +/* * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. * * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. @@ -3002,26 +3358,26 @@ enum punit_power_well { #define TV_CC_CONTROL 0x68090 # define TV_CC_ENABLE (1 << 31) -/** +/* * Specifies which field to send the CC data in. * * CC data is usually sent in field 0. */ # define TV_CC_FID_MASK (1 << 27) # define TV_CC_FID_SHIFT 27 -/** Sets the horizontal position of the CC data. Usually 135. */ +/* Sets the horizontal position of the CC data. Usually 135. */ # define TV_CC_HOFF_MASK 0x03ff0000 # define TV_CC_HOFF_SHIFT 16 -/** Sets the vertical position of the CC data. Usually 21 */ +/* Sets the vertical position of the CC data. Usually 21 */ # define TV_CC_LINE_MASK 0x0000003f # define TV_CC_LINE_SHIFT 0 #define TV_CC_DATA 0x68094 # define TV_CC_RDY (1 << 31) -/** Second word of CC data to be transmitted. */ +/* Second word of CC data to be transmitted. */ # define TV_CC_DATA_2_MASK 0x007f0000 # define TV_CC_DATA_2_SHIFT 16 -/** First word of CC data to be transmitted. */ +/* First word of CC data to be transmitted. */ # define TV_CC_DATA_1_MASK 0x0000007f # define TV_CC_DATA_1_SHIFT 0 @@ -3043,6 +3399,8 @@ enum punit_power_well { #define DP_PORT_EN (1 << 31) #define DP_PIPEB_SELECT (1 << 30) #define DP_PIPE_MASK (1 << 30) +#define DP_PIPE_SELECT_CHV(pipe) ((pipe) << 16) +#define DP_PIPE_MASK_CHV (3 << 16) /* Link training mode - select a suitable mode for each stage */ #define DP_LINK_TRAIN_PAT_1 (0 << 28) @@ -3090,32 +3448,32 @@ enum punit_power_well { #define DP_PLL_FREQ_160MHZ (1 << 16) #define DP_PLL_FREQ_MASK (3 << 16) -/** locked once port is enabled */ +/* locked once port is enabled */ #define DP_PORT_REVERSAL (1 << 15) /* eDP */ #define DP_PLL_ENABLE (1 << 14) -/** sends the clock on lane 15 of the PEG for debug */ +/* sends the clock on lane 15 of the PEG for debug */ #define DP_CLOCK_OUTPUT_ENABLE (1 << 13) #define DP_SCRAMBLING_DISABLE (1 << 12) #define DP_SCRAMBLING_DISABLE_IRONLAKE (1 << 7) -/** limit RGB values to avoid confusing TVs */ +/* limit RGB values to avoid confusing TVs */ #define DP_COLOR_RANGE_16_235 (1 << 8) -/** Turn on the audio link */ +/* Turn on the audio link */ #define DP_AUDIO_OUTPUT_ENABLE (1 << 6) -/** vs and hs sync polarity */ +/* vs and hs sync polarity */ #define DP_SYNC_VS_HIGH (1 << 4) #define DP_SYNC_HS_HIGH (1 << 3) -/** A fantasy */ +/* A fantasy */ #define DP_DETECTED (1 << 2) -/** The aux channel provides a way to talk to the +/* The aux channel provides a way to talk to the * signal sink for DDC etc. Max packet size supported * is 20 bytes in each direction, hence the 5 fixed * data registers @@ -3258,6 +3616,7 @@ enum punit_power_well { #define PIPECONF_INTERLACED_DBL_ILK (4 << 21) /* ilk/snb only */ #define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21) /* ilk/snb only */ #define PIPECONF_INTERLACE_MODE_MASK (7 << 21) +#define PIPECONF_EDP_RR_MODE_SWITCH (1 << 20) #define PIPECONF_CXSR_DOWNCLOCK (1<<16) #define PIPECONF_COLOR_RANGE_SELECT (1 << 13) #define PIPECONF_BPC_MASK (0x7 << 5) @@ -3276,6 +3635,7 @@ enum punit_power_well { #define SPRITE1_FLIP_DONE_INT_EN_VLV (1UL<<30) #define PIPE_CRC_ERROR_ENABLE (1UL<<29) #define PIPE_CRC_DONE_ENABLE (1UL<<28) +#define PERF_COUNTER2_INTERRUPT_EN (1UL<<27) #define PIPE_GMBUS_EVENT_ENABLE (1UL<<27) #define PLANE_FLIP_DONE_INT_EN_VLV (1UL<<26) #define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26) @@ -3287,8 +3647,10 @@ enum punit_power_well { #define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21) #define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20) #define PIPE_B_PSR_INTERRUPT_ENABLE_VLV (1UL<<19) +#define PERF_COUNTER_INTERRUPT_EN (1UL<<19) #define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */ #define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */ +#define PIPE_FRAMESTART_INTERRUPT_ENABLE (1UL<<17) #define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17) #define PIPEA_HBLANK_INT_EN_VLV (1UL<<16) #define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16) @@ -3296,6 +3658,7 @@ enum punit_power_well { #define SPRITE0_FLIP_DONE_INT_STATUS_VLV (1UL<<14) #define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13) #define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12) +#define PERF_COUNTER2_INTERRUPT_STATUS (1UL<<11) #define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11) #define PLANE_FLIP_DONE_INT_STATUS_VLV (1UL<<10) #define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10) @@ -3304,20 +3667,25 @@ enum punit_power_well { #define PIPE_DPST_EVENT_STATUS (1UL<<7) #define PIPE_LEGACY_BLC_EVENT_STATUS (1UL<<6) #define PIPE_A_PSR_STATUS_VLV (1UL<<6) +#define PIPE_LEGACY_BLC_EVENT_STATUS (1UL<<6) #define PIPE_ODD_FIELD_INTERRUPT_STATUS (1UL<<5) #define PIPE_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4) #define PIPE_B_PSR_STATUS_VLV (1UL<<3) +#define PERF_COUNTER_INTERRUPT_STATUS (1UL<<3) #define PIPE_HOTPLUG_TV_INTERRUPT_STATUS (1UL<<2) /* pre-965 */ #define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */ +#define PIPE_FRAMESTART_INTERRUPT_STATUS (1UL<<1) #define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1) +#define PIPE_HBLANK_INT_STATUS (1UL<<0) #define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0) #define PIPESTAT_INT_ENABLE_MASK 0x7fff0000 #define PIPESTAT_INT_STATUS_MASK 0x0000ffff -#define PIPE_A_OFFSET 0x70000 -#define PIPE_B_OFFSET 0x71000 -#define PIPE_C_OFFSET 0x72000 +#define PIPE_A_OFFSET 0x70000 +#define PIPE_B_OFFSET 0x71000 +#define PIPE_C_OFFSET 0x72000 +#define CHV_PIPE_C_OFFSET 0x74000 /* * There's actually no pipe EDP. Some pipe registers have * simply shifted from the pipe to the transcoder, while @@ -3355,14 +3723,25 @@ enum punit_power_well { #define SPRITED_FLIP_DONE_INT_EN (1<<26) #define SPRITEC_FLIP_DONE_INT_EN (1<<25) #define PLANEB_FLIP_DONE_INT_EN (1<<24) +#define PIPE_PSR_INT_EN (1<<22) #define PIPEA_LINE_COMPARE_INT_EN (1<<21) #define PIPEA_HLINE_INT_EN (1<<20) #define PIPEA_VBLANK_INT_EN (1<<19) #define SPRITEB_FLIP_DONE_INT_EN (1<<18) #define SPRITEA_FLIP_DONE_INT_EN (1<<17) #define PLANEA_FLIPDONE_INT_EN (1<<16) - -#define DPINVGTT (VLV_DISPLAY_BASE + 0x7002c) /* VLV only */ +#define PIPEC_LINE_COMPARE_INT_EN (1<<13) +#define PIPEC_HLINE_INT_EN (1<<12) +#define PIPEC_VBLANK_INT_EN (1<<11) +#define SPRITEF_FLIPDONE_INT_EN (1<<10) +#define SPRITEE_FLIPDONE_INT_EN (1<<9) +#define PLANEC_FLIPDONE_INT_EN (1<<8) + +#define DPINVGTT (VLV_DISPLAY_BASE + 0x7002c) /* VLV/CHV only */ +#define SPRITEF_INVALID_GTT_INT_EN (1<<27) +#define SPRITEE_INVALID_GTT_INT_EN (1<<26) +#define PLANEC_INVALID_GTT_INT_EN (1<<25) +#define CURSORC_INVALID_GTT_INT_EN (1<<24) #define CURSORB_INVALID_GTT_INT_EN (1<<23) #define CURSORA_INVALID_GTT_INT_EN (1<<22) #define SPRITED_INVALID_GTT_INT_EN (1<<21) @@ -3372,6 +3751,11 @@ enum punit_power_well { #define SPRITEA_INVALID_GTT_INT_EN (1<<17) #define PLANEA_INVALID_GTT_INT_EN (1<<16) #define DPINVGTT_EN_MASK 0xff0000 +#define DPINVGTT_EN_MASK_CHV 0xfff0000 +#define SPRITEF_INVALID_GTT_STATUS (1<<11) +#define SPRITEE_INVALID_GTT_STATUS (1<<10) +#define PLANEC_INVALID_GTT_STATUS (1<<9) +#define CURSORC_INVALID_GTT_STATUS (1<<8) #define CURSORB_INVALID_GTT_STATUS (1<<7) #define CURSORA_INVALID_GTT_STATUS (1<<6) #define SPRITED_INVALID_GTT_STATUS (1<<5) @@ -3381,6 +3765,7 @@ enum punit_power_well { #define SPRITEA_INVALID_GTT_STATUS (1<<1) #define PLANEA_INVALID_GTT_STATUS (1<<0) #define DPINVGTT_STATUS_MASK 0xff +#define DPINVGTT_STATUS_MASK_CHV 0xfff #define DSPARB 0x70030 #define DSPARB_CSTART_MASK (0x7f << 7) @@ -3420,14 +3805,43 @@ enum punit_power_well { #define DDL_CURSORA_PRECISION_32 (1<<31) #define DDL_CURSORA_PRECISION_16 (0<<31) #define DDL_CURSORA_SHIFT 24 +#define DDL_SPRITEB_PRECISION_32 (1<<23) +#define DDL_SPRITEB_PRECISION_16 (0<<23) +#define DDL_SPRITEB_SHIFT 16 +#define DDL_SPRITEA_PRECISION_32 (1<<15) +#define DDL_SPRITEA_PRECISION_16 (0<<15) +#define DDL_SPRITEA_SHIFT 8 #define DDL_PLANEA_PRECISION_32 (1<<7) #define DDL_PLANEA_PRECISION_16 (0<<7) +#define DDL_PLANEA_SHIFT 0 + #define VLV_DDL2 (VLV_DISPLAY_BASE + 0x70054) #define DDL_CURSORB_PRECISION_32 (1<<31) #define DDL_CURSORB_PRECISION_16 (0<<31) #define DDL_CURSORB_SHIFT 24 +#define DDL_SPRITED_PRECISION_32 (1<<23) +#define DDL_SPRITED_PRECISION_16 (0<<23) +#define DDL_SPRITED_SHIFT 16 +#define DDL_SPRITEC_PRECISION_32 (1<<15) +#define DDL_SPRITEC_PRECISION_16 (0<<15) +#define DDL_SPRITEC_SHIFT 8 #define DDL_PLANEB_PRECISION_32 (1<<7) #define DDL_PLANEB_PRECISION_16 (0<<7) +#define DDL_PLANEB_SHIFT 0 + +#define VLV_DDL3 (VLV_DISPLAY_BASE + 0x70058) +#define DDL_CURSORC_PRECISION_32 (1<<31) +#define DDL_CURSORC_PRECISION_16 (0<<31) +#define DDL_CURSORC_SHIFT 24 +#define DDL_SPRITEF_PRECISION_32 (1<<23) +#define DDL_SPRITEF_PRECISION_16 (0<<23) +#define DDL_SPRITEF_SHIFT 16 +#define DDL_SPRITEE_PRECISION_32 (1<<15) +#define DDL_SPRITEE_PRECISION_16 (0<<15) +#define DDL_SPRITEE_SHIFT 8 +#define DDL_PLANEC_PRECISION_32 (1<<7) +#define DDL_PLANEC_PRECISION_16 (0<<7) +#define DDL_PLANEC_SHIFT 0 /* FIFO watermark sizes etc */ #define G4X_FIFO_LINE_SIZE 64 @@ -3535,12 +3949,13 @@ enum punit_power_well { #define PIPE_PIXEL_MASK 0x00ffffff #define PIPE_PIXEL_SHIFT 0 /* GM45+ just has to be different */ -#define _PIPEA_FRMCOUNT_GM45 (dev_priv->info.display_mmio_offset + 0x70040) -#define _PIPEA_FLIPCOUNT_GM45 (dev_priv->info.display_mmio_offset + 0x70044) -#define PIPE_FRMCOUNT_GM45(pipe) _PIPE(pipe, _PIPEA_FRMCOUNT_GM45, _PIPEB_FRMCOUNT_GM45) +#define _PIPEA_FRMCOUNT_GM45 0x70040 +#define _PIPEA_FLIPCOUNT_GM45 0x70044 +#define PIPE_FRMCOUNT_GM45(pipe) _PIPE2(pipe, _PIPEA_FRMCOUNT_GM45) +#define PIPE_FLIPCOUNT_GM45(pipe) _PIPE2(pipe, _PIPEA_FLIPCOUNT_GM45) /* Cursor A & B regs */ -#define _CURACNTR (dev_priv->info.display_mmio_offset + 0x70080) +#define _CURACNTR 0x70080 /* Old style CUR*CNTR flags (desktop 8xx) */ #define CURSOR_ENABLE 0x80000000 #define CURSOR_GAMMA_ENABLE 0x40000000 @@ -3567,28 +3982,34 @@ enum punit_power_well { #define MCURSOR_PIPE_B (1 << 28) #define MCURSOR_GAMMA_ENABLE (1 << 26) #define CURSOR_TRICKLE_FEED_DISABLE (1 << 14) -#define _CURABASE (dev_priv->info.display_mmio_offset + 0x70084) -#define _CURAPOS (dev_priv->info.display_mmio_offset + 0x70088) +#define _CURABASE 0x70084 +#define _CURAPOS 0x70088 #define CURSOR_POS_MASK 0x007FF #define CURSOR_POS_SIGN 0x8000 #define CURSOR_X_SHIFT 0 #define CURSOR_Y_SHIFT 16 #define CURSIZE 0x700a0 -#define _CURBCNTR (dev_priv->info.display_mmio_offset + 0x700c0) -#define _CURBBASE (dev_priv->info.display_mmio_offset + 0x700c4) -#define _CURBPOS (dev_priv->info.display_mmio_offset + 0x700c8) +#define _CURBCNTR 0x700c0 +#define _CURBBASE 0x700c4 +#define _CURBPOS 0x700c8 #define _CURBCNTR_IVB 0x71080 #define _CURBBASE_IVB 0x71084 #define _CURBPOS_IVB 0x71088 -#define CURCNTR(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR) -#define CURBASE(pipe) _PIPE(pipe, _CURABASE, _CURBBASE) -#define CURPOS(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS) +#define _CURSOR2(pipe, reg) (dev_priv->info.cursor_offsets[(pipe)] - \ + dev_priv->info.cursor_offsets[PIPE_A] + (reg) + \ + dev_priv->info.display_mmio_offset) + +#define CURCNTR(pipe) _CURSOR2(pipe, _CURACNTR) +#define CURBASE(pipe) _CURSOR2(pipe, _CURABASE) +#define CURPOS(pipe) _CURSOR2(pipe, _CURAPOS) -#define CURCNTR_IVB(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR_IVB) -#define CURBASE_IVB(pipe) _PIPE(pipe, _CURABASE, _CURBBASE_IVB) -#define CURPOS_IVB(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS_IVB) +#define CURSOR_A_OFFSET 0x70080 +#define CURSOR_B_OFFSET 0x700c0 +#define CHV_CURSOR_C_OFFSET 0x700e0 +#define IVB_CURSOR_B_OFFSET 0x71080 +#define IVB_CURSOR_C_OFFSET 0x72080 /* Display A control */ #define _DSPACNTR 0x70180 @@ -4093,6 +4514,7 @@ enum punit_power_well { #define GEN8_DE_PIPE_A_IRQ (1<<16) #define GEN8_DE_PIPE_IRQ(pipe) (1<<(16+pipe)) #define GEN8_GT_VECS_IRQ (1<<6) +#define GEN8_GT_PM_IRQ (1<<4) #define GEN8_GT_VCS2_IRQ (1<<3) #define GEN8_GT_VCS1_IRQ (1<<2) #define GEN8_GT_BCS_IRQ (1<<1) @@ -4120,7 +4542,7 @@ enum punit_power_well { #define GEN8_PIPE_SPRITE_FAULT (1 << 9) #define GEN8_PIPE_PRIMARY_FAULT (1 << 8) #define GEN8_PIPE_SPRITE_FLIP_DONE (1 << 5) -#define GEN8_PIPE_FLIP_DONE (1 << 4) +#define GEN8_PIPE_PRIMARY_FLIP_DONE (1 << 4) #define GEN8_PIPE_SCAN_LINE_EVENT (1 << 2) #define GEN8_PIPE_VSYNC (1 << 1) #define GEN8_PIPE_VBLANK (1 << 0) @@ -4832,6 +5254,8 @@ enum punit_power_well { #define PORT_TRANS_SEL_CPT(pipe) ((pipe) << 29) #define PORT_TO_PIPE(val) (((val) & (1<<30)) >> 30) #define PORT_TO_PIPE_CPT(val) (((val) & PORT_TRANS_SEL_MASK) >> 29) +#define SDVO_PORT_TO_PIPE_CHV(val) (((val) & (3<<24)) >> 24) +#define DP_PORT_TO_PIPE_CHV(val) (((val) & (3<<16)) >> 16) #define TRANS_DP_CTL_A 0xe0300 #define TRANS_DP_CTL_B 0xe1300 @@ -4888,6 +5312,8 @@ enum punit_power_well { #define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22) +#define VLV_PMWGICZ 0x1300a4 + #define FORCEWAKE 0xA18C #define FORCEWAKE_VLV 0x1300b0 #define FORCEWAKE_ACK_VLV 0x1300b4 @@ -4896,15 +5322,22 @@ enum punit_power_well { #define FORCEWAKE_ACK_HSW 0x130044 #define FORCEWAKE_ACK 0x130090 #define VLV_GTLC_WAKE_CTRL 0x130090 +#define VLV_GTLC_RENDER_CTX_EXISTS (1 << 25) +#define VLV_GTLC_MEDIA_CTX_EXISTS (1 << 24) +#define VLV_GTLC_ALLOWWAKEREQ (1 << 0) + #define VLV_GTLC_PW_STATUS 0x130094 -#define VLV_GTLC_PW_RENDER_STATUS_MASK 0x80 -#define VLV_GTLC_PW_MEDIA_STATUS_MASK 0x20 +#define VLV_GTLC_ALLOWWAKEACK (1 << 0) +#define VLV_GTLC_ALLOWWAKEERR (1 << 1) +#define VLV_GTLC_PW_MEDIA_STATUS_MASK (1 << 5) +#define VLV_GTLC_PW_RENDER_STATUS_MASK (1 << 7) #define FORCEWAKE_MT 0xa188 /* multi-threaded */ #define FORCEWAKE_KERNEL 0x1 #define FORCEWAKE_USER 0x2 #define FORCEWAKE_MT_ACK 0x130040 #define ECOBUS 0xa180 #define FORCEWAKE_MT_ENABLE (1<<5) +#define VLV_SPAREG2H 0xA194 #define GTFIFODBG 0x120000 #define GT_FIFO_SBDROPERR (1<<6) @@ -4924,6 +5357,7 @@ enum punit_power_well { #define HSW_EDRAM_PRESENT 0x120010 #define GEN6_UCGCTL1 0x9400 +# define GEN6_EU_TCUNIT_CLOCK_GATE_DISABLE (1 << 16) # define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5) # define GEN6_CSUNIT_CLOCK_GATE_DISABLE (1 << 7) @@ -4934,12 +5368,19 @@ enum punit_power_well { # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11) +#define GEN6_UCGCTL3 0x9408 + #define GEN7_UCGCTL4 0x940c #define GEN7_L3BANK2X_CLOCK_GATE_DISABLE (1<<25) +#define GEN6_RCGCTL1 0x9410 +#define GEN6_RCGCTL2 0x9414 +#define GEN6_RSTCTL 0x9420 + #define GEN8_UCGCTL6 0x9430 #define GEN8_SDEUNIT_CLOCK_GATE_DISABLE (1<<14) +#define GEN6_GFXPAUSE 0xA000 #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) #define GEN6_FREQUENCY(x) ((x)<<25) @@ -4992,6 +5433,9 @@ enum punit_power_well { #define GEN6_RP_UP_EI 0xA068 #define GEN6_RP_DOWN_EI 0xA06C #define GEN6_RP_IDLE_HYSTERSIS 0xA070 +#define GEN6_RPDEUHWTC 0xA080 +#define GEN6_RPDEUC 0xA084 +#define GEN6_RPDEUCSW 0xA088 #define GEN6_RC_STATE 0xA094 #define GEN6_RC1_WAKE_RATE_LIMIT 0xA098 #define GEN6_RC6_WAKE_RATE_LIMIT 0xA09C @@ -4999,11 +5443,15 @@ enum punit_power_well { #define GEN6_RC_EVALUATION_INTERVAL 0xA0A8 #define GEN6_RC_IDLE_HYSTERSIS 0xA0AC #define GEN6_RC_SLEEP 0xA0B0 +#define GEN6_RCUBMABDTMR 0xA0B0 #define GEN6_RC1e_THRESHOLD 0xA0B4 #define GEN6_RC6_THRESHOLD 0xA0B8 #define GEN6_RC6p_THRESHOLD 0xA0BC +#define VLV_RCEDATA 0xA0BC #define GEN6_RC6pp_THRESHOLD 0xA0C0 #define GEN6_PMINTRMSK 0xA168 +#define GEN8_PMINTR_REDIRECT_TO_NON_DISP (1<<31) +#define VLV_PWRDWNUPCTL 0xA294 #define GEN6_PMISR 0x44020 #define GEN6_PMIMR 0x44024 /* rps_lock */ @@ -5020,6 +5468,9 @@ enum punit_power_well { GEN6_PM_RP_DOWN_THRESHOLD | \ GEN6_PM_RP_DOWN_TIMEOUT) +#define GEN7_GT_SCRATCH_BASE 0x4F100 +#define GEN7_GT_SCRATCH_REG_NUM 8 + #define VLV_GTLC_SURVIVABILITY_REG 0x130098 #define VLV_GFX_CLK_STATUS_BIT (1<<3) #define VLV_GFX_CLK_FORCE_ON_BIT (1<<2) @@ -5030,6 +5481,9 @@ enum punit_power_well { #define VLV_MEDIA_RC6_COUNT_EN (1<<1) #define VLV_RENDER_RC6_COUNT_EN (1<<0) #define GEN6_GT_GFX_RC6 0x138108 +#define VLV_GT_RENDER_RC6 0x138108 +#define VLV_GT_MEDIA_RC6 0x13810C + #define GEN6_GT_GFX_RC6p 0x13810C #define GEN6_GT_GFX_RC6pp 0x138110 |