diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/dvo_ns2501.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/dvo_ns2501.c | 710 |
1 files changed, 710 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/dvo_ns2501.c b/drivers/gpu/drm/i915/display/dvo_ns2501.c new file mode 100644 index 000000000000..c83a5d88d62b --- /dev/null +++ b/drivers/gpu/drm/i915/display/dvo_ns2501.c @@ -0,0 +1,710 @@ +/* + * + * Copyright (c) 2012 Gilles Dartiguelongue, Thomas Richter + * + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#include "i915_drv.h" +#include "i915_reg.h" +#include "intel_drv.h" +#include "intel_dvo_dev.h" + +#define NS2501_VID 0x1305 +#define NS2501_DID 0x6726 + +#define NS2501_VID_LO 0x00 +#define NS2501_VID_HI 0x01 +#define NS2501_DID_LO 0x02 +#define NS2501_DID_HI 0x03 +#define NS2501_REV 0x04 +#define NS2501_RSVD 0x05 +#define NS2501_FREQ_LO 0x06 +#define NS2501_FREQ_HI 0x07 + +#define NS2501_REG8 0x08 +#define NS2501_8_VEN (1<<5) +#define NS2501_8_HEN (1<<4) +#define NS2501_8_DSEL (1<<3) +#define NS2501_8_BPAS (1<<2) +#define NS2501_8_RSVD (1<<1) +#define NS2501_8_PD (1<<0) + +#define NS2501_REG9 0x09 +#define NS2501_9_VLOW (1<<7) +#define NS2501_9_MSEL_MASK (0x7<<4) +#define NS2501_9_TSEL (1<<3) +#define NS2501_9_RSEN (1<<2) +#define NS2501_9_RSVD (1<<1) +#define NS2501_9_MDI (1<<0) + +#define NS2501_REGC 0x0c + +/* + * The following registers are not part of the official datasheet + * and are the result of reverse engineering. + */ + +/* + * Register c0 controls how the DVO synchronizes with + * its input. + */ +#define NS2501_REGC0 0xc0 +#define NS2501_C0_ENABLE (1<<0) /* enable the DVO sync in general */ +#define NS2501_C0_HSYNC (1<<1) /* synchronize horizontal with input */ +#define NS2501_C0_VSYNC (1<<2) /* synchronize vertical with input */ +#define NS2501_C0_RESET (1<<7) /* reset the synchronization flip/flops */ + +/* + * Register 41 is somehow related to the sync register and sync + * configuration. It should be 0x32 whenever regC0 is 0x05 (hsync off) + * and 0x00 otherwise. + */ +#define NS2501_REG41 0x41 + +/* + * this register controls the dithering of the DVO + * One bit enables it, the other define the dithering depth. + * The higher the value, the lower the dithering depth. + */ +#define NS2501_F9_REG 0xf9 +#define NS2501_F9_ENABLE (1<<0) /* if set, dithering is enabled */ +#define NS2501_F9_DITHER_MASK (0x7f<<1) /* controls the dither depth */ +#define NS2501_F9_DITHER_SHIFT 1 /* shifts the dither mask */ + +/* + * PLL configuration register. This is a pair of registers, + * one single byte register at 1B, and a pair at 1C,1D. + * These registers are counters/dividers. + */ +#define NS2501_REG1B 0x1b /* one byte PLL control register */ +#define NS2501_REG1C 0x1c /* low-part of the second register */ +#define NS2501_REG1D 0x1d /* high-part of the second register */ + +/* + * Scaler control registers. Horizontal at b8,b9, + * vertical at 10,11. The scale factor is computed as + * 2^16/control-value. The low-byte comes first. + */ +#define NS2501_REG10 0x10 /* low-byte vertical scaler */ +#define NS2501_REG11 0x11 /* high-byte vertical scaler */ +#define NS2501_REGB8 0xb8 /* low-byte horizontal scaler */ +#define NS2501_REGB9 0xb9 /* high-byte horizontal scaler */ + +/* + * Display window definition. This consists of four registers + * per dimension. One register pair defines the start of the + * display, one the end. + * As far as I understand, this defines the window within which + * the scaler samples the input. + */ +#define NS2501_REGC1 0xc1 /* low-byte horizontal display start */ +#define NS2501_REGC2 0xc2 /* high-byte horizontal display start */ +#define NS2501_REGC3 0xc3 /* low-byte horizontal display stop */ +#define NS2501_REGC4 0xc4 /* high-byte horizontal display stop */ +#define NS2501_REGC5 0xc5 /* low-byte vertical display start */ +#define NS2501_REGC6 0xc6 /* high-byte vertical display start */ +#define NS2501_REGC7 0xc7 /* low-byte vertical display stop */ +#define NS2501_REGC8 0xc8 /* high-byte vertical display stop */ + +/* + * The following register pair seems to define the start of + * the vertical sync. If automatic syncing is enabled, and the + * register value defines a sync pulse that is later than the + * incoming sync, then the register value is ignored and the + * external hsync triggers the synchronization. + */ +#define NS2501_REG80 0x80 /* low-byte vsync-start */ +#define NS2501_REG81 0x81 /* high-byte vsync-start */ + +/* + * The following register pair seems to define the total number + * of lines created at the output side of the scaler. + * This is again a low-high register pair. + */ +#define NS2501_REG82 0x82 /* output display height, low byte */ +#define NS2501_REG83 0x83 /* output display height, high byte */ + +/* + * The following registers define the end of the front-porch + * in horizontal and vertical position and hence allow to shift + * the image left/right or up/down. + */ +#define NS2501_REG98 0x98 /* horizontal start of display + 256, low */ +#define NS2501_REG99 0x99 /* horizontal start of display + 256, high */ +#define NS2501_REG8E 0x8e /* vertical start of the display, low byte */ +#define NS2501_REG8F 0x8f /* vertical start of the display, high byte */ + +/* + * The following register pair control the function of the + * backlight and the DVO output. To enable the corresponding + * function, the corresponding bit must be set in both registers. + */ +#define NS2501_REG34 0x34 /* DVO enable functions, first register */ +#define NS2501_REG35 0x35 /* DVO enable functions, second register */ +#define NS2501_34_ENABLE_OUTPUT (1<<0) /* enable DVO output */ +#define NS2501_34_ENABLE_BACKLIGHT (1<<1) /* enable backlight */ + +/* + * Registers 9C and 9D define the vertical output offset + * of the visible region. + */ +#define NS2501_REG9C 0x9c +#define NS2501_REG9D 0x9d + +/* + * The register 9F defines the dithering. This requires the + * scaler to be ON. Bit 0 enables dithering, the remaining + * bits control the depth of the dither. The higher the value, + * the LOWER the dithering amplitude. A good value seems to be + * 15 (total register value). + */ +#define NS2501_REGF9 0xf9 +#define NS2501_F9_ENABLE_DITHER (1<<0) /* enable dithering */ +#define NS2501_F9_DITHER_MASK (0x7f<<1) /* dither masking */ +#define NS2501_F9_DITHER_SHIFT 1 /* upshift of the dither mask */ + +enum { + MODE_640x480, + MODE_800x600, + MODE_1024x768, +}; + +struct ns2501_reg { + u8 offset; + u8 value; +}; + +/* + * The following structure keeps the complete configuration of + * the DVO, given a specific output configuration. + * This is pretty much guess-work from reverse-engineering, so + * read all this with a grain of salt. + */ +struct ns2501_configuration { + u8 sync; /* configuration of the C0 register */ + u8 conf; /* configuration register 8 */ + u8 syncb; /* configuration register 41 */ + u8 dither; /* configuration of the dithering */ + u8 pll_a; /* PLL configuration, register A, 1B */ + u16 pll_b; /* PLL configuration, register B, 1C/1D */ + u16 hstart; /* horizontal start, registers C1/C2 */ + u16 hstop; /* horizontal total, registers C3/C4 */ + u16 vstart; /* vertical start, registers C5/C6 */ + u16 vstop; /* vertical total, registers C7/C8 */ + u16 vsync; /* manual vertical sync start, 80/81 */ + u16 vtotal; /* number of lines generated, 82/83 */ + u16 hpos; /* horizontal position + 256, 98/99 */ + u16 vpos; /* vertical position, 8e/8f */ + u16 voffs; /* vertical output offset, 9c/9d */ + u16 hscale; /* horizontal scaling factor, b8/b9 */ + u16 vscale; /* vertical scaling factor, 10/11 */ +}; + +/* + * DVO configuration values, partially based on what the BIOS + * of the Fujitsu Lifebook S6010 writes into registers, + * partially found by manual tweaking. These configurations assume + * a 1024x768 panel. + */ +static const struct ns2501_configuration ns2501_modes[] = { + [MODE_640x480] = { + .sync = NS2501_C0_ENABLE | NS2501_C0_VSYNC, + .conf = NS2501_8_VEN | NS2501_8_HEN | NS2501_8_PD, + .syncb = 0x32, + .dither = 0x0f, + .pll_a = 17, + .pll_b = 852, + .hstart = 144, + .hstop = 783, + .vstart = 22, + .vstop = 514, + .vsync = 2047, /* actually, ignored with this config */ + .vtotal = 1341, + .hpos = 0, + .vpos = 16, + .voffs = 36, + .hscale = 40960, + .vscale = 40960 + }, + [MODE_800x600] = { + .sync = NS2501_C0_ENABLE | + NS2501_C0_HSYNC | NS2501_C0_VSYNC, + .conf = NS2501_8_VEN | NS2501_8_HEN | NS2501_8_PD, + .syncb = 0x00, + .dither = 0x0f, + .pll_a = 25, + .pll_b = 612, + .hstart = 215, + .hstop = 1016, + .vstart = 26, + .vstop = 627, + .vsync = 807, + .vtotal = 1341, + .hpos = 0, + .vpos = 4, + .voffs = 35, + .hscale = 51248, + .vscale = 51232 + }, + [MODE_1024x768] = { + .sync = NS2501_C0_ENABLE | NS2501_C0_VSYNC, + .conf = NS2501_8_VEN | NS2501_8_HEN | NS2501_8_PD, + .syncb = 0x32, + .dither = 0x0f, + .pll_a = 11, + .pll_b = 1350, + .hstart = 276, + .hstop = 1299, + .vstart = 15, + .vstop = 1056, + .vsync = 2047, + .vtotal = 1341, + .hpos = 0, + .vpos = 7, + .voffs = 27, + .hscale = 65535, + .vscale = 65535 + } +}; + +/* + * Other configuration values left by the BIOS of the + * Fujitsu S6010 in the DVO control registers. Their + * value does not depend on the BIOS and their meaning + * is unknown. + */ + +static const struct ns2501_reg mode_agnostic_values[] = { + /* 08 is mode specific */ + [0] = { .offset = 0x0a, .value = 0x81, }, + /* 10,11 are part of the mode specific configuration */ + [1] = { .offset = 0x12, .value = 0x02, }, + [2] = { .offset = 0x18, .value = 0x07, }, + [3] = { .offset = 0x19, .value = 0x00, }, + [4] = { .offset = 0x1a, .value = 0x00, }, /* PLL?, ignored */ + /* 1b,1c,1d are part of the mode specific configuration */ + [5] = { .offset = 0x1e, .value = 0x02, }, + [6] = { .offset = 0x1f, .value = 0x40, }, + [7] = { .offset = 0x20, .value = 0x00, }, + [8] = { .offset = 0x21, .value = 0x00, }, + [9] = { .offset = 0x22, .value = 0x00, }, + [10] = { .offset = 0x23, .value = 0x00, }, + [11] = { .offset = 0x24, .value = 0x00, }, + [12] = { .offset = 0x25, .value = 0x00, }, + [13] = { .offset = 0x26, .value = 0x00, }, + [14] = { .offset = 0x27, .value = 0x00, }, + [15] = { .offset = 0x7e, .value = 0x18, }, + /* 80-84 are part of the mode-specific configuration */ + [16] = { .offset = 0x84, .value = 0x00, }, + [17] = { .offset = 0x85, .value = 0x00, }, + [18] = { .offset = 0x86, .value = 0x00, }, + [19] = { .offset = 0x87, .value = 0x00, }, + [20] = { .offset = 0x88, .value = 0x00, }, + [21] = { .offset = 0x89, .value = 0x00, }, + [22] = { .offset = 0x8a, .value = 0x00, }, + [23] = { .offset = 0x8b, .value = 0x00, }, + [24] = { .offset = 0x8c, .value = 0x10, }, + [25] = { .offset = 0x8d, .value = 0x02, }, + /* 8e,8f are part of the mode-specific configuration */ + [26] = { .offset = 0x90, .value = 0xff, }, + [27] = { .offset = 0x91, .value = 0x07, }, + [28] = { .offset = 0x92, .value = 0xa0, }, + [29] = { .offset = 0x93, .value = 0x02, }, + [30] = { .offset = 0x94, .value = 0x00, }, + [31] = { .offset = 0x95, .value = 0x00, }, + [32] = { .offset = 0x96, .value = 0x05, }, + [33] = { .offset = 0x97, .value = 0x00, }, + /* 98,99 are part of the mode-specific configuration */ + [34] = { .offset = 0x9a, .value = 0x88, }, + [35] = { .offset = 0x9b, .value = 0x00, }, + /* 9c,9d are part of the mode-specific configuration */ + [36] = { .offset = 0x9e, .value = 0x25, }, + [37] = { .offset = 0x9f, .value = 0x03, }, + [38] = { .offset = 0xa0, .value = 0x28, }, + [39] = { .offset = 0xa1, .value = 0x01, }, + [40] = { .offset = 0xa2, .value = 0x28, }, + [41] = { .offset = 0xa3, .value = 0x05, }, + /* register 0xa4 is mode specific, but 0x80..0x84 works always */ + [42] = { .offset = 0xa4, .value = 0x84, }, + [43] = { .offset = 0xa5, .value = 0x00, }, + [44] = { .offset = 0xa6, .value = 0x00, }, + [45] = { .offset = 0xa7, .value = 0x00, }, + [46] = { .offset = 0xa8, .value = 0x00, }, + /* 0xa9 to 0xab are mode specific, but have no visible effect */ + [47] = { .offset = 0xa9, .value = 0x04, }, + [48] = { .offset = 0xaa, .value = 0x70, }, + [49] = { .offset = 0xab, .value = 0x4f, }, + [50] = { .offset = 0xac, .value = 0x00, }, + [51] = { .offset = 0xad, .value = 0x00, }, + [52] = { .offset = 0xb6, .value = 0x09, }, + [53] = { .offset = 0xb7, .value = 0x03, }, + /* b8,b9 are part of the mode-specific configuration */ + [54] = { .offset = 0xba, .value = 0x00, }, + [55] = { .offset = 0xbb, .value = 0x20, }, + [56] = { .offset = 0xf3, .value = 0x90, }, + [57] = { .offset = 0xf4, .value = 0x00, }, + [58] = { .offset = 0xf7, .value = 0x88, }, + /* f8 is mode specific, but the value does not matter */ + [59] = { .offset = 0xf8, .value = 0x0a, }, + [60] = { .offset = 0xf9, .value = 0x00, } +}; + +static const struct ns2501_reg regs_init[] = { + [0] = { .offset = 0x35, .value = 0xff, }, + [1] = { .offset = 0x34, .value = 0x00, }, + [2] = { .offset = 0x08, .value = 0x30, }, +}; + +struct ns2501_priv { + bool quiet; + const struct ns2501_configuration *conf; +}; + +#define NSPTR(d) ((NS2501Ptr)(d->DriverPrivate.ptr)) + +/* +** Read a register from the ns2501. +** Returns true if successful, false otherwise. +** If it returns false, it might be wise to enable the +** DVO with the above function. +*/ +static bool ns2501_readb(struct intel_dvo_device *dvo, int addr, u8 *ch) +{ + struct ns2501_priv *ns = dvo->dev_priv; + struct i2c_adapter *adapter = dvo->i2c_bus; + u8 out_buf[2]; + u8 in_buf[2]; + + struct i2c_msg msgs[] = { + { + .addr = dvo->slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = dvo->slave_addr, + .flags = I2C_M_RD, + .len = 1, + .buf = in_buf, + } + }; + + out_buf[0] = addr; + out_buf[1] = 0; + + if (i2c_transfer(adapter, msgs, 2) == 2) { + *ch = in_buf[0]; + return true; + } + + if (!ns->quiet) { + DRM_DEBUG_KMS + ("Unable to read register 0x%02x from %s:0x%02x.\n", addr, + adapter->name, dvo->slave_addr); + } + + return false; +} + +/* +** Write a register to the ns2501. +** Returns true if successful, false otherwise. +** If it returns false, it might be wise to enable the +** DVO with the above function. +*/ +static bool ns2501_writeb(struct intel_dvo_device *dvo, int addr, u8 ch) +{ + struct ns2501_priv *ns = dvo->dev_priv; + struct i2c_adapter *adapter = dvo->i2c_bus; + u8 out_buf[2]; + + struct i2c_msg msg = { + .addr = dvo->slave_addr, + .flags = 0, + .len = 2, + .buf = out_buf, + }; + + out_buf[0] = addr; + out_buf[1] = ch; + + if (i2c_transfer(adapter, &msg, 1) == 1) { + return true; + } + + if (!ns->quiet) { + DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d\n", + addr, adapter->name, dvo->slave_addr); + } + + return false; +} + +/* National Semiconductor 2501 driver for chip on i2c bus + * scan for the chip on the bus. + * Hope the VBIOS initialized the PLL correctly so we can + * talk to it. If not, it will not be seen and not detected. + * Bummer! + */ +static bool ns2501_init(struct intel_dvo_device *dvo, + struct i2c_adapter *adapter) +{ + /* this will detect the NS2501 chip on the specified i2c bus */ + struct ns2501_priv *ns; + unsigned char ch; + + ns = kzalloc(sizeof(struct ns2501_priv), GFP_KERNEL); + if (ns == NULL) + return false; + + dvo->i2c_bus = adapter; + dvo->dev_priv = ns; + ns->quiet = true; + + if (!ns2501_readb(dvo, NS2501_VID_LO, &ch)) + goto out; + + if (ch != (NS2501_VID & 0xff)) { + DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", + ch, adapter->name, dvo->slave_addr); + goto out; + } + + if (!ns2501_readb(dvo, NS2501_DID_LO, &ch)) + goto out; + + if (ch != (NS2501_DID & 0xff)) { + DRM_DEBUG_KMS("ns2501 not detected got %d: from %s Slave %d.\n", + ch, adapter->name, dvo->slave_addr); + goto out; + } + ns->quiet = false; + + DRM_DEBUG_KMS("init ns2501 dvo controller successfully!\n"); + + return true; + +out: + kfree(ns); + return false; +} + +static enum drm_connector_status ns2501_detect(struct intel_dvo_device *dvo) +{ + /* + * This is a Laptop display, it doesn't have hotplugging. + * Even if not, the detection bit of the 2501 is unreliable as + * it only works for some display types. + * It is even more unreliable as the PLL must be active for + * allowing reading from the chiop. + */ + return connector_status_connected; +} + +static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo, + struct drm_display_mode *mode) +{ + DRM_DEBUG_KMS + ("is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n", + mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal); + + /* + * Currently, these are all the modes I have data from. + * More might exist. Unclear how to find the native resolution + * of the panel in here so we could always accept it + * by disabling the scaler. + */ + if ((mode->hdisplay == 640 && mode->vdisplay == 480 && mode->clock == 25175) || + (mode->hdisplay == 800 && mode->vdisplay == 600 && mode->clock == 40000) || + (mode->hdisplay == 1024 && mode->vdisplay == 768 && mode->clock == 65000)) { + return MODE_OK; + } else { + return MODE_ONE_SIZE; /* Is this a reasonable error? */ + } +} + +static void ns2501_mode_set(struct intel_dvo_device *dvo, + const struct drm_display_mode *mode, + const struct drm_display_mode *adjusted_mode) +{ + const struct ns2501_configuration *conf; + struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); + int mode_idx, i; + + DRM_DEBUG_KMS + ("set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n", + mode->hdisplay, mode->htotal, mode->vdisplay, mode->vtotal); + + DRM_DEBUG_KMS("Detailed requested mode settings are:\n" + "clock : %d kHz\n" + "hdisplay : %d\n" + "hblank start : %d\n" + "hblank end : %d\n" + "hsync start : %d\n" + "hsync end : %d\n" + "htotal : %d\n" + "hskew : %d\n" + "vdisplay : %d\n" + "vblank start : %d\n" + "hblank end : %d\n" + "vsync start : %d\n" + "vsync end : %d\n" + "vtotal : %d\n", + adjusted_mode->crtc_clock, + adjusted_mode->crtc_hdisplay, + adjusted_mode->crtc_hblank_start, + adjusted_mode->crtc_hblank_end, + adjusted_mode->crtc_hsync_start, + adjusted_mode->crtc_hsync_end, + adjusted_mode->crtc_htotal, + adjusted_mode->crtc_hskew, + adjusted_mode->crtc_vdisplay, + adjusted_mode->crtc_vblank_start, + adjusted_mode->crtc_vblank_end, + adjusted_mode->crtc_vsync_start, + adjusted_mode->crtc_vsync_end, + adjusted_mode->crtc_vtotal); + + if (mode->hdisplay == 640 && mode->vdisplay == 480) + mode_idx = MODE_640x480; + else if (mode->hdisplay == 800 && mode->vdisplay == 600) + mode_idx = MODE_800x600; + else if (mode->hdisplay == 1024 && mode->vdisplay == 768) + mode_idx = MODE_1024x768; + else + return; + + /* Hopefully doing it every time won't hurt... */ + for (i = 0; i < ARRAY_SIZE(regs_init); i++) + ns2501_writeb(dvo, regs_init[i].offset, regs_init[i].value); + + /* Write the mode-agnostic values */ + for (i = 0; i < ARRAY_SIZE(mode_agnostic_values); i++) + ns2501_writeb(dvo, mode_agnostic_values[i].offset, + mode_agnostic_values[i].value); + + /* Write now the mode-specific configuration */ + conf = ns2501_modes + mode_idx; + ns->conf = conf; + + ns2501_writeb(dvo, NS2501_REG8, conf->conf); + ns2501_writeb(dvo, NS2501_REG1B, conf->pll_a); + ns2501_writeb(dvo, NS2501_REG1C, conf->pll_b & 0xff); + ns2501_writeb(dvo, NS2501_REG1D, conf->pll_b >> 8); + ns2501_writeb(dvo, NS2501_REGC1, conf->hstart & 0xff); + ns2501_writeb(dvo, NS2501_REGC2, conf->hstart >> 8); + ns2501_writeb(dvo, NS2501_REGC3, conf->hstop & 0xff); + ns2501_writeb(dvo, NS2501_REGC4, conf->hstop >> 8); + ns2501_writeb(dvo, NS2501_REGC5, conf->vstart & 0xff); + ns2501_writeb(dvo, NS2501_REGC6, conf->vstart >> 8); + ns2501_writeb(dvo, NS2501_REGC7, conf->vstop & 0xff); + ns2501_writeb(dvo, NS2501_REGC8, conf->vstop >> 8); + ns2501_writeb(dvo, NS2501_REG80, conf->vsync & 0xff); + ns2501_writeb(dvo, NS2501_REG81, conf->vsync >> 8); + ns2501_writeb(dvo, NS2501_REG82, conf->vtotal & 0xff); + ns2501_writeb(dvo, NS2501_REG83, conf->vtotal >> 8); + ns2501_writeb(dvo, NS2501_REG98, conf->hpos & 0xff); + ns2501_writeb(dvo, NS2501_REG99, conf->hpos >> 8); + ns2501_writeb(dvo, NS2501_REG8E, conf->vpos & 0xff); + ns2501_writeb(dvo, NS2501_REG8F, conf->vpos >> 8); + ns2501_writeb(dvo, NS2501_REG9C, conf->voffs & 0xff); + ns2501_writeb(dvo, NS2501_REG9D, conf->voffs >> 8); + ns2501_writeb(dvo, NS2501_REGB8, conf->hscale & 0xff); + ns2501_writeb(dvo, NS2501_REGB9, conf->hscale >> 8); + ns2501_writeb(dvo, NS2501_REG10, conf->vscale & 0xff); + ns2501_writeb(dvo, NS2501_REG11, conf->vscale >> 8); + ns2501_writeb(dvo, NS2501_REGF9, conf->dither); + ns2501_writeb(dvo, NS2501_REG41, conf->syncb); + ns2501_writeb(dvo, NS2501_REGC0, conf->sync); +} + +/* set the NS2501 power state */ +static bool ns2501_get_hw_state(struct intel_dvo_device *dvo) +{ + unsigned char ch; + + if (!ns2501_readb(dvo, NS2501_REG8, &ch)) + return false; + + return ch & NS2501_8_PD; +} + +/* set the NS2501 power state */ +static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable) +{ + struct ns2501_priv *ns = (struct ns2501_priv *)(dvo->dev_priv); + + DRM_DEBUG_KMS("Trying set the dpms of the DVO to %i\n", enable); + + if (enable) { + ns2501_writeb(dvo, NS2501_REGC0, ns->conf->sync | 0x08); + + ns2501_writeb(dvo, NS2501_REG41, ns->conf->syncb); + + ns2501_writeb(dvo, NS2501_REG34, NS2501_34_ENABLE_OUTPUT); + msleep(15); + + ns2501_writeb(dvo, NS2501_REG8, + ns->conf->conf | NS2501_8_BPAS); + if (!(ns->conf->conf & NS2501_8_BPAS)) + ns2501_writeb(dvo, NS2501_REG8, ns->conf->conf); + msleep(200); + + ns2501_writeb(dvo, NS2501_REG34, + NS2501_34_ENABLE_OUTPUT | NS2501_34_ENABLE_BACKLIGHT); + + ns2501_writeb(dvo, NS2501_REGC0, ns->conf->sync); + } else { + ns2501_writeb(dvo, NS2501_REG34, NS2501_34_ENABLE_OUTPUT); + msleep(200); + + ns2501_writeb(dvo, NS2501_REG8, NS2501_8_VEN | NS2501_8_HEN | + NS2501_8_BPAS); + msleep(15); + + ns2501_writeb(dvo, NS2501_REG34, 0x00); + } +} + +static void ns2501_destroy(struct intel_dvo_device *dvo) +{ + struct ns2501_priv *ns = dvo->dev_priv; + + if (ns) { + kfree(ns); + dvo->dev_priv = NULL; + } +} + +const struct intel_dvo_dev_ops ns2501_ops = { + .init = ns2501_init, + .detect = ns2501_detect, + .mode_valid = ns2501_mode_valid, + .mode_set = ns2501_mode_set, + .dpms = ns2501_dpms, + .get_hw_state = ns2501_get_hw_state, + .destroy = ns2501_destroy, +}; |