diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 92 |
1 files changed, 88 insertions, 4 deletions
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h index 01b597d021fd..71214c7a60fc 100644 --- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h +++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h @@ -46,10 +46,10 @@ /* Firmware versioning. */ #ifdef DMUB_EXPOSE_VERSION -#define DMUB_FW_VERSION_GIT_HASH 0x082bd4c8 +#define DMUB_FW_VERSION_GIT_HASH 0x929554ba #define DMUB_FW_VERSION_MAJOR 0 #define DMUB_FW_VERSION_MINOR 0 -#define DMUB_FW_VERSION_REVISION 106 +#define DMUB_FW_VERSION_REVISION 108 #define DMUB_FW_VERSION_TEST 0 #define DMUB_FW_VERSION_VBIOS 0 #define DMUB_FW_VERSION_HOTFIX 0 @@ -1450,6 +1450,80 @@ enum dmub_cmd_mall_type { DMUB_CMD__MALL_ACTION_NO_DF_REQ = 3, }; +/** + * PHY Link rate for DP. + */ +enum phy_link_rate { + /** + * not supported. + */ + PHY_RATE_UNKNOWN = 0, + /** + * Rate_1 (RBR) - 1.62 Gbps/Lane + */ + PHY_RATE_162 = 1, + /** + * Rate_2 - 2.16 Gbps/Lane + */ + PHY_RATE_216 = 2, + /** + * Rate_3 - 2.43 Gbps/Lane + */ + PHY_RATE_243 = 3, + /** + * Rate_4 (HBR) - 2.70 Gbps/Lane + */ + PHY_RATE_270 = 4, + /** + * Rate_5 (RBR2)- 3.24 Gbps/Lane + */ + PHY_RATE_324 = 5, + /** + * Rate_6 - 4.32 Gbps/Lane + */ + PHY_RATE_432 = 6, + /** + * Rate_7 (HBR2)- 5.40 Gbps/Lane + */ + PHY_RATE_540 = 7, + /** + * Rate_8 (HBR3)- 8.10 Gbps/Lane + */ + PHY_RATE_810 = 8, + /** + * UHBR10 - 10.0 Gbps/Lane + */ + PHY_RATE_1000 = 9, + /** + * UHBR13.5 - 13.5 Gbps/Lane + */ + PHY_RATE_1350 = 10, + /** + * UHBR10 - 20.0 Gbps/Lane + */ + PHY_RATE_2000 = 11, +}; + +/** + * enum dmub_phy_fsm_state - PHY FSM states. + * PHY FSM state to transit to during PSR enable/disable. + */ +enum dmub_phy_fsm_state { + DMUB_PHY_FSM_POWER_UP_DEFAULT = 0, + DMUB_PHY_FSM_RESET, + DMUB_PHY_FSM_RESET_RELEASED, + DMUB_PHY_FSM_SRAM_LOAD_DONE, + DMUB_PHY_FSM_INITIALIZED, + DMUB_PHY_FSM_CALIBRATED, + DMUB_PHY_FSM_CALIBRATED_LP, + DMUB_PHY_FSM_CALIBRATED_PG, + DMUB_PHY_FSM_POWER_DOWN, + DMUB_PHY_FSM_PLL_EN, + DMUB_PHY_FSM_TX_EN, + DMUB_PHY_FSM_FAST_LP, +}; + + /** * Data passed from driver to FW in a DMUB_CMD__PSR_COPY_SETTINGS command. @@ -1698,9 +1772,16 @@ struct dmub_cmd_psr_force_static_data { */ uint8_t panel_inst; /** - * Explicit padding to 4 byte boundary. + * Phy state to enter. + * Values to use are defined in dmub_phy_fsm_state */ - uint8_t pad[2]; + uint8_t phy_fsm_state; + /** + * Phy rate for DP - RBR/HBR/HBR2/HBR3. + * Set this using enum phy_link_rate. + * This does not support HDMI/DP2 for now. + */ + uint8_t phy_rate; }; /** @@ -2377,6 +2458,9 @@ struct dmub_cmd_panel_cntl_data { uint32_t bl_pwm_ref_div1; /* in/out */ uint8_t is_backlight_on : 1; /* in/out */ uint8_t is_powered_on : 1; /* in/out */ + uint8_t padding[3]; + uint32_t bl_pwm_ref_div2; /* in/out */ + uint8_t reserved[4]; }; /** |