diff options
Diffstat (limited to 'arch/arm64/Kconfig.platforms')
-rw-r--r-- | arch/arm64/Kconfig.platforms | 207 |
1 files changed, 144 insertions, 63 deletions
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index b2b504ea6fd6..24335565bad5 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -8,17 +8,14 @@ config ARCH_ACTIONS help This enables support for the Actions Semiconductor S900 SoC family. -config ARCH_AGILEX - bool "Intel's Agilex SoCFPGA Family" - help - This enables support for Intel's Agilex SoCFPGA Family. - config ARCH_SUNXI bool "Allwinner sunxi 64-bit SoC Family" select ARCH_HAS_RESET_CONTROLLER - select GENERIC_IRQ_CHIP select PINCTRL select RESET_CONTROLLER + select SUN4I_TIMER + select SUN6I_R_INTC + select SUNXI_NMI_INTC help This enables support for Allwinner sunxi based SoCs like the A64. @@ -29,6 +26,18 @@ config ARCH_ALPINE This enables support for the Annapurna Labs Alpine Soc family. +config ARCH_APPLE + bool "Apple Silicon SoC family" + select APPLE_AIC + help + This enables support for Apple's in-house ARM SoC family, starting + with the Apple M1. + +menuconfig ARCH_BCM + bool "Broadcom SoC Support" + +if ARCH_BCM + config ARCH_BCM2835 bool "Broadcom BCM2835 family" select TIMER_OF @@ -39,7 +48,6 @@ config ARCH_BCM2835 select ARM_AMBA select ARM_GIC select ARM_TIMER_SP804 - select HAVE_ARM_ARCH_TIMER help This enables support for the Broadcom BCM2837 and BCM2711 SoC. These SoCs are used in the Raspberry Pi 3 and 4 devices. @@ -52,9 +60,30 @@ config ARCH_BCM_IPROC help This enables support for Broadcom iProc based SoCs +config ARCH_BCMBCA + bool "Broadcom Broadband Carrier Access (BCA) origin SoC" + select GPIOLIB + help + Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based + BCA chipset. + + This enables support for Broadcom BCA ARM-based broadband chipsets, + including the DSL, PON and Wireless family of chips. + +config ARCH_BRCMSTB + bool "Broadcom Set-Top-Box SoCs" + select ARCH_HAS_RESET_CONTROLLER + select GENERIC_IRQ_CHIP + select PINCTRL + help + This enables support for Broadcom's ARMv8 Set Top Box SoCs + +endif + config ARCH_BERLIN bool "Marvell Berlin SoC Family" select DW_APB_ICTL + select DW_APB_TIMER_OF select GPIOLIB select PINCTRL help @@ -65,24 +94,12 @@ config ARCH_BITMAIN help This enables support for the Bitmain SoC Family. -config ARCH_BRCMSTB - bool "Broadcom Set-Top-Box SoCs" - select ARCH_HAS_RESET_CONTROLLER - select BCM7038_L1_IRQ - select BRCMSTB_L2_IRQ - select GENERIC_IRQ_CHIP - select PINCTRL - help - This enables support for Broadcom's ARMv8 Set Top Box SoCs - config ARCH_EXYNOS - bool "ARMv8 based Samsung Exynos SoC family" + bool "Samsung Exynos SoC family" select COMMON_CLK_SAMSUNG - select EXYNOS_CHIPID + select CLKSRC_EXYNOS_MCT select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS select EXYNOS_PMU - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS select PINCTRL select PINCTRL_EXYNOS select PM_GENERIC_DOMAINS if PM @@ -90,6 +107,20 @@ config ARCH_EXYNOS help This enables support for ARMv8 based Samsung Exynos SoC family. +config ARCH_SPARX5 + bool "Microchip Sparx5 SoC family" + select PINCTRL + select DW_APB_TIMER_OF + help + This enables support for the Microchip Sparx5 ARMv8-based + SoC family of TSN-capable gigabit switches. + + The SparX-5 Ethernet switch family provides a rich set of + switching features such as advanced TCAM-based VLAN and QoS + processing enabling delivery of differentiated services, and + security through TCAM-based frame processing using versatile + content aware processor (VCAP). + config ARCH_K3 bool "Texas Instruments Inc. K3 multicore SoC architecture" select PM_GENERIC_DOMAINS if PM @@ -99,16 +130,11 @@ config ARCH_K3 select TI_SCI_PROTOCOL select TI_SCI_INTR_IRQCHIP select TI_SCI_INTA_IRQCHIP + select TI_K3_SOCINFO help This enables support for Texas Instruments' K3 multicore SoC architecture. -config ARCH_LAYERSCAPE - bool "ARMv8 based Freescale Layerscape SoC family" - select EDAC_SUPPORT - help - This enables support for the Freescale Layerscape SoC family. - config ARCH_LG1K bool "LG Electronics LG1K SoC Family" help @@ -122,6 +148,11 @@ config ARCH_HISI help This enables support for Hisilicon ARMv8 SoC family +config ARCH_KEEMBAY + bool "Keem Bay SoC" + help + This enables support for Intel Movidius SoC code-named Keem Bay. + config ARCH_MEDIATEK bool "MediaTek SoC Family" select ARM_GIC @@ -133,12 +164,6 @@ config ARCH_MEDIATEK config ARCH_MESON bool "Amlogic Platforms" - select PINCTRL - select PINCTRL_MESON - select COMMON_CLK_GXBB - select COMMON_CLK_AXG - select COMMON_CLK_G12A - select MESON_IRQ_GPIO help This enables support for the arm64 based Amlogic SoCs such as the s905, S905X/D, S912, A113X/D or S905X/D2 @@ -160,14 +185,27 @@ config ARCH_MVEBU select PINCTRL_ARMADA_37XX select PINCTRL_ARMADA_AP806 select PINCTRL_ARMADA_CP110 + select PINCTRL_AC5 help - This enables support for Marvell EBU familly, including: + This enables support for Marvell EBU family, including: - Armada 3700 SoC Family - Armada 7K SoC Family - Armada 8K SoC Family + - 98DX2530 SoC Family + +menuconfig ARCH_NXP + bool "NXP SoC support" + +if ARCH_NXP + +config ARCH_LAYERSCAPE + bool "Freescale Layerscape SoC family" + select EDAC_SUPPORT + help + This enables support for the Freescale Layerscape SoC family. config ARCH_MXC - bool "ARMv8 based NXP i.MX SoC family" + bool "NXP i.MX SoC family" select ARM64_ERRATUM_843419 select ARM64_ERRATUM_845719 if COMPAT select IMX_GPCV2 @@ -180,6 +218,44 @@ config ARCH_MXC This enables support for the ARMv8 based SoCs in the NXP i.MX family. +config ARCH_S32 + bool "NXP S32 SoC Family" + help + This enables support for the NXP S32 family of processors. + +endif + +config ARCH_MA35 + bool "Nuvoton MA35 Architecture" + select GPIOLIB + select PINCTRL + select RESET_CONTROLLER + help + This enables support for the ARMv8 based Nuvoton MA35 series SoCs. + +config ARCH_NPCM + bool "Nuvoton NPCM Architecture" + select PINCTRL + select GPIOLIB + select NPCM7XX_TIMER + select RESET_CONTROLLER + select MFD_SYSCON + help + General support for NPCM8xx BMC (Arbel). + Nuvoton NPCM8xx BMC based on the Cortex A35. + +config ARCH_PENSANDO + bool "AMD Pensando Platforms" + help + This enables support for the ARMv8 based AMD Pensando SoC + family to include the Elba SoC. + + AMD Pensando SoCs support a range of Distributed Services + Cards in PCIe format installed into servers. The Elba + SoC includes 16 Cortex A-72 CPU cores, 144 P4-programmable + cores for a minimal latency/jitter datapath, and network + interfaces up to 200 Gb/s. + config ARCH_QCOM bool "Qualcomm Platforms" select GPIOLIB @@ -196,50 +272,55 @@ config ARCH_REALTEK config ARCH_RENESAS bool "Renesas SoC Platforms" - select GPIOLIB - select PINCTRL - select SOC_BUS help This enables support for the ARMv8 based Renesas SoCs. config ARCH_ROCKCHIP bool "Rockchip Platforms" select ARCH_HAS_RESET_CONTROLLER - select GPIOLIB select PINCTRL - select PINCTRL_ROCKCHIP select PM select ROCKCHIP_TIMER help This enables support for the ARMv8 based Rockchip chipsets, like the RK3368. -config ARCH_S32 - bool "NXP S32 SoC Family" - help - This enables support for the NXP S32 family of processors. - config ARCH_SEATTLE bool "AMD Seattle SoC Family" help This enables support for AMD Seattle SOC Family -config ARCH_STRATIX10 - bool "Altera's Stratix 10 SoCFPGA Family" +config ARCH_INTEL_SOCFPGA + bool "Intel's SoCFPGA ARMv8 Families" help - This enables support for Altera's Stratix 10 SoCFPGA Family. + This enables support for Intel's SoCFPGA ARMv8 families: + Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform, + Agilex and eASIC N5X. + +config ARCH_STM32 + bool "STMicroelectronics STM32 SoC Family" + select GPIOLIB + select PINCTRL + select PINCTRL_STM32MP257 + select ARM_SMC_MBOX + select ARM_SCMI_PROTOCOL + select COMMON_CLK_SCMI + help + This enables support for ARMv8 based STMicroelectronics + STM32 family, including: + - STM32MP25: + - STM32MP251, STM32MP253, STM32MP255 and STM32MP257. config ARCH_SYNQUACER bool "Socionext SynQuacer SoC Family" + select IRQ_FASTEOI_HIERARCHY_HANDLERS config ARCH_TEGRA bool "NVIDIA Tegra SoC Family" select ARCH_HAS_RESET_CONTROLLER select ARM_GIC_PM - select CLKDEV_LOOKUP select CLKSRC_MMIO select TIMER_OF - select GENERIC_CLOCKEVENTS select GPIOLIB select PINCTRL select PM @@ -248,6 +329,12 @@ config ARCH_TEGRA help This enables support for the NVIDIA Tegra SoC family. +config ARCH_TESLA_FSD + bool "Tesla platform" + depends on ARCH_EXYNOS + help + Support for ARMv8 based Tesla platforms. + config ARCH_SPRD bool "Spreadtrum SoC platform" help @@ -275,34 +362,28 @@ config ARCH_UNIPHIER config ARCH_VEXPRESS bool "ARMv8 software model (Versatile Express)" - select COMMON_CLK_VERSATILE select GPIOLIB select PM select PM_GENERIC_DOMAINS - select POWER_RESET_VEXPRESS - select VEXPRESS_CONFIG help This enables support for the ARMv8 software model (Versatile Express). -config ARCH_VULCAN - def_bool n +config ARCH_VISCONTI + bool "Toshiba Visconti SoC Family" + select PINCTRL + select PINCTRL_VISCONTI + help + This enables support for Toshiba Visconti SoCs Family. config ARCH_XGENE bool "AppliedMicro X-Gene SOC Family" help This enables support for AppliedMicro X-Gene SOC Family -config ARCH_ZX - bool "ZTE ZX SoC Family" - select PINCTRL - help - This enables support for ZTE ZX SoC Family - config ARCH_ZYNQMP bool "Xilinx ZynqMP Family" - select ZYNQMP_FIRMWARE help This enables support for Xilinx ZynqMP Family -endmenu +endmenu # "Platform selection" |