summaryrefslogtreecommitdiff
path: root/arch/arm/mach-u300/timer.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-u300/timer.c')
-rw-r--r--arch/arm/mach-u300/timer.c451
1 files changed, 0 insertions, 451 deletions
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
deleted file mode 100644
index fe08fd34c0ce..000000000000
--- a/arch/arm/mach-u300/timer.c
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/timer.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Timer COH 901 328, runs the OS timer interrupt.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-/* Generic stuff */
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-/*
- * APP side special timer registers
- * This timer contains four timers which can fire an interrupt each.
- * OS (operating system) timer @ 32768 Hz
- * DD (device driver) timer @ 1 kHz
- * GP1 (general purpose 1) timer @ 1MHz
- * GP2 (general purpose 2) timer @ 1MHz
- */
-
-/* Reset OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_ROST (0x0000)
-#define U300_TIMER_APP_ROST_TIMER_RESET (0x00000000)
-/* Enable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_EOST (0x0004)
-#define U300_TIMER_APP_EOST_TIMER_ENABLE (0x00000000)
-/* Disable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_DOST (0x0008)
-#define U300_TIMER_APP_DOST_TIMER_DISABLE (0x00000000)
-/* OS Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SOSTM (0x000c)
-#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT (0x00000001)
-/* OS Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTS (0x0010)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK (0x0000000F)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE (0x00000001)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE (0x00000002)
-#define U300_TIMER_APP_OSTS_ENABLE_IND (0x00000010)
-#define U300_TIMER_APP_OSTS_MODE_MASK (0x00000020)
-#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT (0x00000020)
-#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND (0x00000040)
-#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND (0x00000080)
-/* OS Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTCC (0x0014)
-/* OS Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_OSTTC (0x0018)
-/* OS Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIE (0x001c)
-#define U300_TIMER_APP_OSTIE_IRQ_DISABLE (0x00000000)
-#define U300_TIMER_APP_OSTIE_IRQ_ENABLE (0x00000001)
-/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIA (0x0020)
-#define U300_TIMER_APP_OSTIA_IRQ_ACK (0x00000080)
-
-/* Reset DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_RDDT (0x0040)
-#define U300_TIMER_APP_RDDT_TIMER_RESET (0x00000000)
-/* Enable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_EDDT (0x0044)
-#define U300_TIMER_APP_EDDT_TIMER_ENABLE (0x00000000)
-/* Disable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_DDDT (0x0048)
-#define U300_TIMER_APP_DDDT_TIMER_DISABLE (0x00000000)
-/* DD Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SDDTM (0x004c)
-#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT (0x00000001)
-/* DD Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTS (0x0050)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK (0x0000000F)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE (0x00000001)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE (0x00000002)
-#define U300_TIMER_APP_DDTS_ENABLE_IND (0x00000010)
-#define U300_TIMER_APP_DDTS_MODE_MASK (0x00000020)
-#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT (0x00000020)
-#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND (0x00000040)
-#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND (0x00000080)
-/* DD Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTCC (0x0054)
-/* DD Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_DDTTC (0x0058)
-/* DD Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIE (0x005c)
-#define U300_TIMER_APP_DDTIE_IRQ_DISABLE (0x00000000)
-#define U300_TIMER_APP_DDTIE_IRQ_ENABLE (0x00000001)
-/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIA (0x0060)
-#define U300_TIMER_APP_DDTIA_IRQ_ACK (0x00000080)
-
-/* Reset GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT1 (0x0080)
-#define U300_TIMER_APP_RGPT1_TIMER_RESET (0x00000000)
-/* Enable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT1 (0x0084)
-#define U300_TIMER_APP_EGPT1_TIMER_ENABLE (0x00000000)
-/* Disable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT1 (0x0088)
-#define U300_TIMER_APP_DGPT1_TIMER_DISABLE (0x00000000)
-/* GP1 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT1M (0x008c)
-#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT (0x00000001)
-/* GP1 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1S (0x0090)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK (0x0000000F)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE (0x00000001)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE (0x00000002)
-#define U300_TIMER_APP_GPT1S_ENABLE_IND (0x00000010)
-#define U300_TIMER_APP_GPT1S_MODE_MASK (0x00000020)
-#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT (0x00000020)
-#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND (0x00000040)
-#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND (0x00000080)
-/* GP1 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1CC (0x0094)
-/* GP1 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT1TC (0x0098)
-/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IE (0x009c)
-#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE (0x00000000)
-#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE (0x00000001)
-/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IA (0x00a0)
-#define U300_TIMER_APP_GPT1IA_IRQ_ACK (0x00000080)
-
-/* Reset GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT2 (0x00c0)
-#define U300_TIMER_APP_RGPT2_TIMER_RESET (0x00000000)
-/* Enable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT2 (0x00c4)
-#define U300_TIMER_APP_EGPT2_TIMER_ENABLE (0x00000000)
-/* Disable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT2 (0x00c8)
-#define U300_TIMER_APP_DGPT2_TIMER_DISABLE (0x00000000)
-/* GP2 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT2M (0x00cc)
-#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT (0x00000001)
-/* GP2 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2S (0x00d0)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK (0x0000000F)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE (0x00000001)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE (0x00000002)
-#define U300_TIMER_APP_GPT2S_ENABLE_IND (0x00000010)
-#define U300_TIMER_APP_GPT2S_MODE_MASK (0x00000020)
-#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT (0x00000020)
-#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND (0x00000040)
-#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND (0x00000080)
-/* GP2 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2CC (0x00d4)
-/* GP2 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT2TC (0x00d8)
-/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IE (0x00dc)
-#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE (0x00000000)
-#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE (0x00000001)
-/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IA (0x00e0)
-#define U300_TIMER_APP_GPT2IA_IRQ_ACK (0x00000080)
-
-/* Clock request control register - all four timers */
-#define U300_TIMER_APP_CRC (0x100)
-#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE (0x00000001)
-
-static void __iomem *u300_timer_base;
-
-struct u300_clockevent_data {
- struct clock_event_device cevd;
- unsigned ticks_per_jiffy;
-};
-
-/*
- * The u300_set_mode() function is always called first, if we
- * have oneshot timer active, the oneshot scheduling function
- * u300_set_next_event() is called immediately after.
- */
-static void u300_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- struct u300_clockevent_data *cevdata =
- container_of(evt, struct u300_clockevent_data, cevd);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- /* Disable interrupts on GPT1 */
- writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Disable GP1 while we're reprogramming it. */
- writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DGPT1);
- /*
- * Set the periodic mode to a certain number of ticks per
- * jiffy.
- */
- writel(cevdata->ticks_per_jiffy,
- u300_timer_base + U300_TIMER_APP_GPT1TC);
- /*
- * Set continuous mode, so the timer keeps triggering
- * interrupts.
- */
- writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
- u300_timer_base + U300_TIMER_APP_SGPT1M);
- /* Enable timer interrupts */
- writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Then enable the OS timer again */
- writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
- u300_timer_base + U300_TIMER_APP_EGPT1);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* Just break; here? */
- /*
- * The actual event will be programmed by the next event hook,
- * so we just set a dummy value somewhere at the end of the
- * universe here.
- */
- /* Disable interrupts on GPT1 */
- writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Disable GP1 while we're reprogramming it. */
- writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DGPT1);
- /*
- * Expire far in the future, u300_set_next_event() will be
- * called soon...
- */
- writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
- /* We run one shot per tick here! */
- writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
- u300_timer_base + U300_TIMER_APP_SGPT1M);
- /* Enable interrupts for this timer */
- writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Enable timer */
- writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
- u300_timer_base + U300_TIMER_APP_EGPT1);
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- /* Disable interrupts on GP1 */
- writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Disable GP1 */
- writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DGPT1);
- break;
- case CLOCK_EVT_MODE_RESUME:
- /* Ignore this call */
- break;
- }
-}
-
-/*
- * The app timer in one shot mode obviously has to be reprogrammed
- * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
- * the interrupt disable + timer disable commands with a reset command,
- * it will fail miserably. Apparently (and I found this the hard way)
- * the timer is very sensitive to the instruction order, though you don't
- * get that impression from the data sheet.
- */
-static int u300_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-
-{
- /* Disable interrupts on GPT1 */
- writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Disable GP1 while we're reprogramming it. */
- writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DGPT1);
- /* Reset the General Purpose timer 1. */
- writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
- u300_timer_base + U300_TIMER_APP_RGPT1);
- /* IRQ in n * cycles */
- writel(cycles, u300_timer_base + U300_TIMER_APP_GPT1TC);
- /*
- * We run one shot per tick here! (This is necessary to reconfigure,
- * the timer will tilt if you don't!)
- */
- writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
- u300_timer_base + U300_TIMER_APP_SGPT1M);
- /* Enable timer interrupts */
- writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Then enable the OS timer again */
- writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
- u300_timer_base + U300_TIMER_APP_EGPT1);
- return 0;
-}
-
-static struct u300_clockevent_data u300_clockevent_data = {
- /* Use general purpose timer 1 as clock event */
- .cevd = {
- .name = "GPT1",
- /* Reasonably fast and accurate clock event */
- .rating = 300,
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = u300_set_next_event,
- .set_mode = u300_set_mode,
- },
-};
-
-/* Clock event timer interrupt handler */
-static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &u300_clockevent_data.cevd;
- /* ACK/Clear timer IRQ for the APP GPT1 Timer */
-
- writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
- u300_timer_base + U300_TIMER_APP_GPT1IA);
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static struct irqaction u300_timer_irq = {
- .name = "U300 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = u300_timer_interrupt,
-};
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by OMAP implementation.)
- */
-
-static u64 notrace u300_read_sched_clock(void)
-{
- return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
-}
-
-static unsigned long u300_read_current_timer(void)
-{
- return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
-}
-
-static struct delay_timer u300_delay_timer;
-
-/*
- * This sets up the system timers, clock source and clock event.
- */
-static void __init u300_timer_init_of(struct device_node *np)
-{
- unsigned int irq;
- struct clk *clk;
- unsigned long rate;
-
- u300_timer_base = of_iomap(np, 0);
- if (!u300_timer_base)
- panic("could not ioremap system timer\n");
-
- /* Get the IRQ for the GP1 timer */
- irq = irq_of_parse_and_map(np, 2);
- if (!irq)
- panic("no IRQ for system timer\n");
-
- pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);
-
- /* Clock the interrupt controller */
- clk = of_clk_get(np, 0);
- BUG_ON(IS_ERR(clk));
- clk_prepare_enable(clk);
- rate = clk_get_rate(clk);
-
- u300_clockevent_data.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
-
- sched_clock_register(u300_read_sched_clock, 32, rate);
-
- u300_delay_timer.read_current_timer = &u300_read_current_timer;
- u300_delay_timer.freq = rate;
- register_current_timer_delay(&u300_delay_timer);
-
- /*
- * Disable the "OS" and "DD" timers - these are designed for Symbian!
- * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
- */
- writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
- u300_timer_base + U300_TIMER_APP_CRC);
- writel(U300_TIMER_APP_ROST_TIMER_RESET,
- u300_timer_base + U300_TIMER_APP_ROST);
- writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DOST);
- writel(U300_TIMER_APP_RDDT_TIMER_RESET,
- u300_timer_base + U300_TIMER_APP_RDDT);
- writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DDDT);
-
- /* Reset the General Purpose timer 1. */
- writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
- u300_timer_base + U300_TIMER_APP_RGPT1);
-
- /* Set up the IRQ handler */
- setup_irq(irq, &u300_timer_irq);
-
- /* Reset the General Purpose timer 2 */
- writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
- u300_timer_base + U300_TIMER_APP_RGPT2);
- /* Set this timer to run around forever */
- writel(0xFFFFFFFFU, u300_timer_base + U300_TIMER_APP_GPT2TC);
- /* Set continuous mode so it wraps around */
- writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
- u300_timer_base + U300_TIMER_APP_SGPT2M);
- /* Disable timer interrupts */
- writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT2IE);
- /* Then enable the GP2 timer to use as a free running us counter */
- writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
- u300_timer_base + U300_TIMER_APP_EGPT2);
-
- /* Use general purpose timer 2 as clock source */
- if (clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC,
- "GPT2", rate, 300, 32, clocksource_mmio_readl_up))
- pr_err("timer: failed to initialize U300 clock source\n");
-
- /* Configure and register the clockevent */
- clockevents_config_and_register(&u300_clockevent_data.cevd, rate,
- 1, 0xffffffff);
-
- /*
- * TODO: init and register the rest of the timers too, they can be
- * used by hrtimers!
- */
-}
-
-CLOCKSOURCE_OF_DECLARE(u300_timer, "stericsson,u300-apptimer",
- u300_timer_init_of);