diff options
Diffstat (limited to 'arch/arm/boot/dts/rk3288-r89.dts')
-rw-r--r-- | arch/arm/boot/dts/rk3288-r89.dts | 387 |
1 files changed, 0 insertions, 387 deletions
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts deleted file mode 100644 index a6ffc381abaa..000000000000 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ /dev/null @@ -1,387 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> - */ - -/dts-v1/; -#include <dt-bindings/input/input.h> -#include <dt-bindings/pwm/pwm.h> -#include "rk3288.dtsi" - -/ { - compatible = "netxeon,r89", "rockchip,rk3288"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - #clock-cells = <0>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - power { - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "GPIO Key Power"; - linux,input-type = <1>; - wakeup-source; - debounce-interval = <100>; - }; - }; - - ir: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_int>; - }; - - vcc_host: vcc-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&host_vbus_drv>; - regulator-name = "vcc_host"; - regulator-always-on; - regulator-boot-on; - }; - - vcc_otg: vcc-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-name = "vcc_otg"; - regulator-always-on; - regulator-boot-on; - }; - - vcc_sdmmc: sdmmc-regulator { - compatible = "regulator-fixed"; - regulator-name = "sdmmc-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; - startup-delay-us = <100000>; - vin-supply = <&vcc_io>; - }; - - vcc_sys: sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "sys-supply"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&gmac { - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - clock_in_out = "input"; - snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "ok"; -}; - -&hdmi { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: pmic@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "VDD_CPU"; - regulator-enable-ramp-delay = <300>; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <8000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - - vdd_gpu: pmic@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "VDD_GPU"; - regulator-enable-ramp-delay = <300>; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <8000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - }; - - rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-output-names = "xin32k"; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - }; - - act8846: pmic@5a { - compatible = "active-semi,act8846"; - reg = <0x5a>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; - system-power-controller; - - regulators { - vcc_ddr: REG1 { - regulator-name = "VCC_DDR"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vcc_io: REG2 { - regulator-name = "VCC_IO"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_log: REG3 { - regulator-name = "VDD_LOG"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcc_20: REG4 { - regulator-name = "VCC_20"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - vccio_sd: REG5 { - regulator-name = "VCCIO_SD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd10_lcd: REG6 { - regulator-name = "VDD10_LCD"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcc_wl: REG7 { - regulator-name = "VCC_WL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vcca_33: REG8 { - regulator-name = "VCCA_33"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vcc_lan: REG9 { - regulator-name = "VCC_LAN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_10: REG10 { - regulator-name = "VDD_10"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vcc_18: REG11 { - regulator-name = "VCC_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc18_lcd: REG12 { - regulator-name = "VCC18_LCD"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - }; -}; - -&i2c5 { - status = "okay"; -}; - -&pinctrl { - pcfg_output_high: pcfg-output-high { - output-high; - }; - - pcfg_output_low: pcfg-output-low { - output-low; - }; - - act8846 { - pmic_vsel: pmic-vsel { - rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>; - }; - - pwr_hold: pwr-hold { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - ir { - ir_int: ir-int { - rockchip,pins = <7 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc_18>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - vmmc-supply = <&vcc_sdmmc>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <0>; - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host1 { - status = "okay"; -}; - -&usb_otg { - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&wdt { - status = "okay"; -}; |