diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
29 files changed, 1021 insertions, 177 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index ab48ab2f4240..1d3e88daca04 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -43,14 +43,70 @@ properties: vdd33-supply: description: Regulator that provides the supply 3.3V power. + analogix,lane0-swing: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane0 PHY. + Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0, + Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2, + Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and + [Swing control] setting. + Registers 0~9, bit 3:0 is [Boost control], these bits control + post cursor manual, increase the [Boost control] to increase + Pre-emphasis value. + Registers 0~9, bit 6:4 is [Swing control], these bits control + swing manual, increase [Swing control] setting to add Vp-p value + for each Swing, Pre. + Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0, + Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2, + Swing1_Pre2, Swing0_Pre3, they are for [R select control] and + [R Termination control] setting. + Registers 10~19, bit 4:0 is [R select control], these bits are + compensation manual, increase it can enhance IO driven strength + and Vp-p. + Registers 10~19, bit 5:6 is [R termination control], these bits + adjust 50ohm impedance of DP tx termination. 00:55 ohm, + 01:50 ohm(default), 10:45 ohm, 11:40 ohm. + + analogix,lane1-swing: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane1 PHY. + DP TX lane1 swing register setting same with lane0 + swing, please refer lane0-swing property description. + + analogix,audio-enable: + type: boolean + description: let the driver enable audio HDMI codec function or not. + ports: $ref: /schemas/graph.yaml#/properties/ports properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: - Video port for MIPI DSI input. + MIPI DSI/DPI input. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + bus-type: + enum: [1, 5] + default: 1 + + data-lanes: true port@1: $ref: /schemas/graph.yaml#/properties/port @@ -87,6 +143,9 @@ examples: vdd10-supply = <&pp1000_mipibrdg>; vdd18-supply = <&pp1800_mipibrdg>; vdd33-supply = <&pp3300_mipibrdg>; + analogix,audio-enable; + analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; ports { #address-cells = <1>; @@ -96,6 +155,8 @@ examples: reg = <0>; anx7625_in: endpoint { remote-endpoint = <&mipi_dsi>; + bus-type = <5>; + data-lanes = <0 1 2 3>; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 1faae3e323a4..5079c1cc337b 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -79,6 +79,14 @@ properties: - port@0 - port@1 + pclk-sample: + description: + Data sampling on rising or falling edge. + enum: + - 0 # Falling edge + - 1 # Rising edge + default: 0 + powerdown-gpios: description: The GPIO used to control the power down line of this device. @@ -86,21 +94,32 @@ properties: power-supply: true -if: - not: - properties: - compatible: - contains: - const: lvds-decoder -then: - properties: - ports: +allOf: + - if: + not: + properties: + compatible: + contains: + const: lvds-decoder + then: properties: - port@0: + ports: properties: - endpoint: + port@0: properties: - data-mapping: false + endpoint: + properties: + data-mapping: false + + - if: + not: + properties: + compatible: + contains: + const: lvds-encoder + then: + properties: + pclk-sample: false required: - compatible diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml new file mode 100644 index 000000000000..107dd138e6c6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PTN3460 eDP to LVDS bridge + +maintainers: + - Sean Paul <seanpaul@chromium.org> + +properties: + compatible: + const: nxp,ptn3460 + + reg: + description: I2C address of the bridge + maxItems: 1 + + edid-emulation: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: + The EDID emulation entry to use + Value Resolution Description + 0 1024x768 NXP Generic + 1 1920x1080 NXP Generic + 2 1920x1080 NXP Generic + 3 1600x900 Samsung LTM200KT + 4 1920x1080 Samsung LTM230HT + 5 1366x768 NXP Generic + 6 1600x900 ChiMei M215HGE + enum: [0, 1, 2, 3, 4, 5, 6] + + powerdown-gpios: + description: GPIO connected to the PD_N signal. + maxItems: 1 + + reset-gpios: + description: GPIO connected to the RST_N signal. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for LVDS output + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for eDP input + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - edid-emulation + - powerdown-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + edid-emulation = <5>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + reg = <1>; + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt b/Documentation/devicetree/bindings/display/bridge/ptn3460.txt deleted file mode 100644 index 361971ba104d..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt +++ /dev/null @@ -1,39 +0,0 @@ -ptn3460 bridge bindings - -Required properties: - - compatible: "nxp,ptn3460" - - reg: i2c address of the bridge - - powerdown-gpio: OF device-tree gpio specification for PD_N pin. - - reset-gpio: OF device-tree gpio specification for RST_N pin. - - edid-emulation: The EDID emulation entry to use - +-------+------------+------------------+ - | Value | Resolution | Description | - | 0 | 1024x768 | NXP Generic | - | 1 | 1920x1080 | NXP Generic | - | 2 | 1920x1080 | NXP Generic | - | 3 | 1600x900 | Samsung LTM200KT | - | 4 | 1920x1080 | Samsung LTM230HT | - | 5 | 1366x768 | NXP Generic | - | 6 | 1600x900 | ChiMei M215HGE | - +-------+------------+------------------+ - - - video interfaces: Device node can contain video interface port - nodes for panel according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpio = <&gpy2 5 1 0 0>; - reset-gpio = <&gpx1 5 1 0 0>; - edid-emulation = <5>; - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml new file mode 100644 index 000000000000..afeeb967393d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car MIPI DSI/CSI-2 Encoder + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +description: | + This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas + R-Car V3U SoC. The encoder can operate in either DSI or CSI-2 mode, with up + to four data lanes. + +properties: + compatible: + enum: + - renesas,r8a779a0-dsi-csi2-tx # for V3U + + reg: + maxItems: 1 + + clocks: + items: + - description: Functional clock + - description: DSI (and CSI-2) functional clock + - description: PLL reference clock + + clock-names: + items: + - const: fck + - const: dsi + - const: pll + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DSI/CSI-2 output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - clocks + - power-domains + - resets + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> + #include <dt-bindings/power/r8a779a0-sysc.h> + + dsi0: dsi-encoder@fed80000 { + compatible = "renesas,r8a779a0-dsi-csi2-tx"; + reg = <0xfed80000 0x10000>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 415>, + <&cpg CPG_CORE R8A779A0_CLK_DSI>, + <&cpg CPG_CORE R8A779A0_CLK_CP>; + clock-names = "fck", "dsi", "pll"; + resets = <&cpg 415>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi0>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2>; + remote-endpoint = <&sn65dsi86_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt deleted file mode 100644 index a55bf77bd960..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/sii9234.txt +++ /dev/null @@ -1,49 +0,0 @@ -Silicon Image SiI9234 HDMI/MHL bridge bindings - -Required properties: - - compatible : "sil,sii9234". - - reg : I2C address for TPI interface, use 0x39 - - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) - - iovcc18-supply : I/O Supply Voltage (1.8V) - - avcc12-supply : TMDS Analog Supply Voltage (1.2V) - - cvcc12-supply : Digital Core Supply Voltage (1.2V) - - interrupts: interrupt specifier of INT pin - - reset-gpios: gpio specifier of RESET pin (active low) - - video interfaces: Device node can contain two video interface port - nodes for HDMI encoder and connector according to [1]. - - port@0 - MHL to HDMI - - port@1 - MHL to connector - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - - -Example: - sii9234@39 { - compatible = "sil,sii9234"; - reg = <0x39>; - avcc33-supply = <&vcc33mhl>; - iovcc18-supply = <&vcc18mhl>; - avcc12-supply = <&vsil12>; - cvcc12-supply = <&vsil12>; - reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpf3>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; - }; - }; - port@1 { - reg = <1>; - mhl_to_connector: endpoint { - remote-endpoint = <&connector_to_mhl>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml new file mode 100644 index 000000000000..f88ddfe4818b --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image SiI9234 HDMI/MHL bridge + +maintainers: + - Maciej Purski <m.purski@samsung.com> + +properties: + compatible: + const: sil,sii9234 + + reg: + description: I2C address for TPI interface + maxItems: 1 + + avcc12-supply: + description: TMDS Analog Supply Voltage, 1.2V + + avcc33-supply: + description: MHL/USB Switch Supply Voltage, 3.3V + + cvcc12-supply: + description: Digital Core Supply Voltage, 1.2V + + iovcc18-supply: + description: I/O voltage supply, 1.8V + + interrupts: + maxItems: 1 + + reset-gpios: + description: GPIO connected to the reset pin. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for HDMI (encoder) input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + MHL to connector port + + required: + - port@0 + +required: + - compatible + - reg + - avcc12-supply + - avcc33-supply + - cvcc12-supply + - iovcc18-supply + - interrupts + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@39 { + compatible = "sil,sii9234"; + reg = <0x39>; + avcc12-supply = <&vsil12>; + avcc33-supply = <&vcc33mhl>; + cvcc12-supply = <&vsil12>; + iovcc18-supply = <&vcc18mhl>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + + port@1 { + reg = <1>; + mhl_to_connector: endpoint { + remote-endpoint = <&connector_to_mhl>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index 63e585f48789..5457612ab136 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -17,6 +17,8 @@ properties: compatible: enum: - qcom,sc7180-dp + - qcom,sc7280-dp + - qcom,sc7280-edp - qcom,sc8180x-dp - qcom,sc8180x-edp diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt deleted file mode 100644 index eff9daff418c..000000000000 --- a/Documentation/devicetree/bindings/display/msm/edp.txt +++ /dev/null @@ -1,56 +0,0 @@ -Qualcomm Technologies Inc. adreno/snapdragon eDP output - -Required properties: -- compatible: - * "qcom,mdss-edp" -- reg: Physical base address and length of the registers of controller and PLL -- reg-names: The names of register regions. The following regions are required: - * "edp" - * "pll_base" -- interrupts: The interrupt signal from the eDP block. -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: the following clocks are required: - * "core" - * "iface" - * "mdp_core" - * "pixel" - * "link" -- #clock-cells: The value should be 1. -- vdda-supply: phandle to vdda regulator device node -- lvl-vdd-supply: phandle to regulator device node which is used to supply power - to HPD receiving chip -- panel-en-gpios: GPIO pin to supply power to panel. -- panel-hpd-gpios: GPIO pin used for eDP hpd. - - -Example: - mdss_edp: qcom,mdss_edp@fd923400 { - compatible = "qcom,mdss-edp"; - reg-names = - "edp", - "pll_base"; - reg = <0xfd923400 0x700>, - <0xfd923a00 0xd4>; - interrupt-parent = <&mdss_mdp>; - interrupts = <12 0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = - "core", - "pixel", - "iface", - "link", - "mdp_core"; - clocks = - <&mmcc MDSS_EDPAUX_CLK>, - <&mmcc MDSS_EDPPIXEL_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_EDPLINK_CLK>, - <&mmcc MDSS_MDP_CLK>; - #clock-cells = <1>; - vdda-supply = <&pma8084_l12>; - lvl-vdd-supply = <&lvl_vreg>; - panel-en-gpios = <&tlmm 137 0>; - panel-hpd-gpios = <&tlmm 103 0>; - }; diff --git a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml new file mode 100644 index 000000000000..a8f3afa922c8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED + video mode panel module on MIPI-DSI 4-Lane interface, GGRB + pixel arrangement, 63 micrometers pitch, with an active + area of 68.04 x 136.08 millimeters. + Each pixel is divided into red and green dots, or blue and + green dots, and two pixels share red or blue dots which are + arranged in vertical stripe. + The DriverIC for this panel module is SW43404. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: boe,bf060y8m-aj0 + + elvdd-supply: + description: EL Driving positive (VDD) supply (4.40-4.80V) + elvss-supply: + description: EL Driving negative (VSS) supply (-5.00V to -1.40V) + vcc-supply: + description: Core (TSP) voltage supply (2.70-3.60V) + vci-supply: + description: DriverIC Operation supply (2.60-3.60V) + vddio-supply: + description: I/O voltage supply (1.62-1.98V) + + port: true + reg: true + reset-gpios: true + +required: + - compatible + - elvdd-supply + - elvss-supply + - vcc-supply + - vci-supply + - vddio-supply + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,bf060y8m-aj0"; + reg = <0>; + + reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + + vcc-supply = <&disp_vcc_vreg>; + vddio-supply = <&disp_vddio_vreg>; + vci-supply = <&disp_vci_vreg>; + elvdd-supply = <&disp_elvdd_vreg>; + elvss-supply = <&disp_elvss_vreg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml new file mode 100644 index 000000000000..7e7a8362b951 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9163 display panels device tree bindings + +maintainers: + - Daniel Mack <daniel@zonque.org> + +description: + This binding is for display panels using an Ilitek ILI9163 controller in SPI + mode. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - newhaven,1.8-128160EF + - const: ilitek,ili9163 + + spi-max-frequency: + maximum: 32000000 + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + + backlight: true + reg: true + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - dc-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + }; + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "newhaven,1.8-128160EF", "ilitek,ili9163"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <180>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index b2fcec4f22fd..c5d1df680858 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -9,24 +9,28 @@ title: Ilitek ILI9881c based MIPI-DSI panels maintainers: - Maxime Ripard <mripard@kernel.org> +allOf: + - $ref: panel-common.yaml# + properties: compatible: items: - enum: - bananapi,lhr050h41 - feixin,k101-im2byl02 + - wanchanglong,w552946aba - const: ilitek,ili9881c backlight: true power-supply: true reg: true reset-gpios: true + rotation: true required: - compatible - power-supply - reg - - reset-gpios additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml new file mode 100644 index 000000000000..377a05d48a02 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT35950-based display panels + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels, + with Static RAM for content retention in command mode and also supports + video mode with VESA Frame Buffer Compression or Display Stream Compression + on single, or dual dsi port(s). + This DDIC is also capable of upscaling an input image to the panel's native + resolution, for example it can upscale a 1920x1080 input to 3840x2160 with + either bilinear interpolation or pixel duplication. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - sharp,ls055d1sx04 + - const: novatek,nt35950 + description: This indicates the panel manufacturer of the panel + that is in turn using the NT35950 panel driver. The compatible + string determines how the NT35950 panel driver shall be configured + to work with the indicated panel. The novatek,nt35950 compatible shall + always be provided as a fallback. + + reset-gpios: + maxItems: 1 + description: phandle of gpio for reset line - This should be 8mA, gpio + can be configured using mux, pinctrl, pinctrl-names (active high) + + avdd-supply: + description: positive boost supply regulator + avee-supply: + description: negative boost supply regulator + dvdd-supply: + description: regulator that supplies the digital voltage + vddio-supply: + description: regulator that supplies the I/O voltage + + backlight: true + ports: true + reg: true + +required: + - compatible + - reg + - reset-gpios + - avdd-supply + - avee-supply + - dvdd-supply + - vddio-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls055d1sx04", "novatek,nt35950"; + reg = <0>; + + backlight = <&pmi8998_wled>; + reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&lab>; + avee-supply = <&ibb>; + dvdd-supply = <&disp_dvdd_vreg>; + vddio-supply = <&vreg_l14a_1p85>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel_in1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index fbd71669248f..2c00813f5d20 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -35,6 +35,8 @@ properties: - boe,tv080wum-nl0 # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel - innolux,p079zca + # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel + - jdi,fhd-r63452 # Khadas TS050 5" 1080x1920 LCD panel - khadas,ts050 # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index f3c9395d23b6..62f5f050c1bc 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -290,6 +290,8 @@ properties: - starry,kr070pe2t # Starry 12.2" (1920x1200 pixels) TFT LCD panel - starry,kr122ea0sra + # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel + - team-source-display,tst043015cmhx # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel - tianma,tm070jdhg30 # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml new file mode 100644 index 000000000000..967972939598 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sony,tulip-truly-nt35521.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony Tulip Truly NT35521 5.24" 1280x720 MIPI-DSI Panel + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: | + The Sony Tulip Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel, which + can be found no Sony Xperia M4 phone. The panel backlight is managed + through DSI link. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sony,tulip-truly-nt35521 + + reg: true + + positive5-supply: + description: Positive 5V supply + + negative5-supply: + description: Negative 5V supply + + reset-gpios: true + + enable-gpios: true + + port: true + +required: + - compatible + - reg + - positive5-supply + - negative5-supply + - reset-gpios + - enable-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sony,tulip-truly-nt35521"; + reg = <0>; + positive5-supply = <&positive5_reg>; + negative5-supply = <&negative5_reg>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml new file mode 100644 index 000000000000..3d107e9434be --- /dev/null +++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sprd/sprd,display-subsystem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc DRM master device + +maintainers: + - Kevin Tang <kevin.tang@unisoc.com> + +description: | + The Unisoc DRM master device is a virtual device needed to list all + DPU devices or other display interface nodes that comprise the + graphics subsystem. + + Unisoc's display pipeline have several components as below description, + multi display controllers and corresponding physical interfaces. + For different display scenarios, dpu0 and dpu1 maybe binding to different + encoder. + + E.g: + dpu0 and dpu1 both binding to DSI for dual mipi-dsi display; + dpu0 binding to DSI for primary display, and dpu1 binding to DP for external display; + + +-----------------------------------------+ + | | + | +---------+ | + +----+ | +----+ +---------+ |DPHY/CPHY| | +------+ + | +----->+dpu0+--->+MIPI|DSI +--->+Combo +----->+Panel0| + |AXI | | +----+ +---------+ +---------+ | +------+ + | | | ^ | + | | | | | + | | | +-----------+ | + | | | | | + |APB | | +--+-+ +-----------+ +---+ | +------+ + | +----->+dpu1+--->+DisplayPort+--->+PHY+--------->+Panel1| + | | | +----+ +-----------+ +---+ | +------+ + +----+ | | + +-----------------------------------------+ + +properties: + compatible: + const: sprd,display-subsystem + + ports: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should contain a list of phandles pointing to display interface port + of DPU devices. + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + display-subsystem { + compatible = "sprd,display-subsystem"; + ports = <&dpu_out>; + }; + diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml new file mode 100644 index 000000000000..4ebea60b8c5b --- /dev/null +++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc Sharkl3 Display Processor Unit (DPU) + +maintainers: + - Kevin Tang <kevin.tang@unisoc.com> + +description: | + DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs + which transfers the image data from a video memory buffer to an internal + LCD interface. + +properties: + compatible: + const: sprd,sharkl3-dpu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + + clock-names: + items: + - const: clk_src_128m + - const: clk_src_384m + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + port: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + That port should be the output endpoint, usually output to + the associated DSI. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sprd,sc9860-clk.h> + dpu: dpu@63000000 { + compatible = "sprd,sharkl3-dpu"; + reg = <0x63000000 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "clk_src_128m", "clk_src_384m"; + + clocks = <&pll CLK_TWPLL_128M>, + <&pll CLK_TWPLL_384M>; + + dpu_port: port { + dpu_out: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml new file mode 100644 index 000000000000..bc5594d18643 --- /dev/null +++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dsi-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc MIPI DSI Controller + +maintainers: + - Kevin Tang <kevin.tang@unisoc.com> + +properties: + compatible: + const: sprd,sharkl3-dsi-host + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + clocks: + minItems: 1 + + clock-names: + items: + - const: clk_src_96m + + power-domains: + maxItems: 1 + + ports: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: + A port node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + That port should be the input endpoint, usually coming from + the associated DPU. + + required: + - "#address-cells" + - "#size-cells" + - port@0 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sprd,sc9860-clk.h> + dsi: dsi@63100000 { + compatible = "sprd,sharkl3-dsi-host"; + reg = <0x63100000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "clk_src_96m"; + clocks = <&pll CLK_TWPLL_96M>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&dpu_out>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml index 29b9447f3b84..fe0c89edf7c1 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml @@ -17,9 +17,10 @@ properties: oneOf: - enum: - fsl,imx7ulp-lpi2c - - fsl,imx8qm-lpi2c - items: - - const: fsl,imx8qxp-lpi2c + - enum: + - fsl,imx8qxp-lpi2c + - fsl,imx8qm-lpi2c - const: fsl,imx7ulp-lpi2c reg: diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index c65921e66dc1..81c87295912c 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -136,7 +136,7 @@ examples: samsung,syscon-phandle = <&pmu_system_controller>; /* NTC thermistor is a hwmon device */ - ncp15wb473 { + thermistor { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <47000>; diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml index 060a309ff8e7..dbe7ecc19ccb 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.yaml +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml @@ -142,7 +142,7 @@ examples: down { label = "GPIO Key DOWN"; linux,code = <108>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; }; }; diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml index 877183cf4278..1ef849dc74d7 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml @@ -79,6 +79,8 @@ properties: properties: data-lanes: + description: + Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines. items: minItems: 1 maxItems: 4 @@ -91,18 +93,6 @@ properties: required: - data-lanes - allOf: - - if: - properties: - compatible: - contains: - const: fsl,imx7-mipi-csi2 - then: - properties: - data-lanes: - items: - maxItems: 2 - port@1: $ref: /schemas/graph.yaml#/properties/port description: diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 2766fe45bb98..ee42328a109d 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -91,6 +91,14 @@ properties: compensate for the board being designed with the lanes swapped. + enet-phy-lane-no-swap: + $ref: /schemas/types.yaml#/definitions/flag + description: + If set, indicates that PHY will disable swap of the + TX/RX lanes. This property allows the PHY to work correcly after + e.g. wrong bootstrap configuration caused by issues in PCB + layout design. + eee-broken-100tx: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml index 04d5654efb38..79906519c652 100644 --- a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml +++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml @@ -29,7 +29,7 @@ properties: - PHY_TYPE_PCIE - PHY_TYPE_SATA - PHY_TYPE_SGMII - - PHY_TYPE_USB + - PHY_TYPE_USB3 - description: The PHY instance minimum: 0 maximum: 1 # for DP, SATA or USB diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml index 06eca6667f67..8367a1fd4057 100644 --- a/Documentation/devicetree/bindings/power/supply/bq25980.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml @@ -105,7 +105,7 @@ examples: reg = <0x65>; interrupt-parent = <&gpio1>; interrupts = <16 IRQ_TYPE_EDGE_FALLING>; - ti,watchdog-timer = <0>; + ti,watchdog-timeout-ms = <0>; ti,sc-ocp-limit-microamp = <2000000>; ti,sc-ovp-limit-microvolt = <17800000>; monitored-battery = <&bat>; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml index 0e6249d7c133..5e172e9462b9 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml @@ -19,6 +19,9 @@ properties: clocks: maxItems: 1 + interrupts: + maxItems: 1 + "#sound-dai-cells": const: 0 diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml index 7f987e79337c..52a78a2e362e 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -33,6 +33,7 @@ properties: - rockchip,rk3328-spi - rockchip,rk3368-spi - rockchip,rk3399-spi + - rockchip,rk3568-spi - rockchip,rv1126-spi - const: rockchip,rk3066-spi diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 66d6432fd781..03777900be8b 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1236,6 +1236,8 @@ patternProperties: description: Truly Semiconductors Limited "^visionox,.*": description: Visionox + "^team-source-display,.*": + description: Shenzhen Team Source Display Technology Co., Ltd. (TSD) "^tsd,.*": description: Theobroma Systems Design und Consulting GmbH "^tyan,.*": @@ -1328,6 +1330,8 @@ patternProperties: description: Wondermedia Technologies, Inc. "^wobo,.*": description: Wobo + "^wanchanglong,.*": + description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd. "^x-powers,.*": description: X-Powers "^xes,.*": |