diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input/touchscreen')
22 files changed, 0 insertions, 32 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt index 3c8614c451f2..cdd743a1f2d5 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt @@ -5,7 +5,6 @@ Required properties: for I2C slave, use "adi,ad7879-1" - reg : SPI chipselect/I2C slave address See spi-bus.txt for more SPI slave properties -- interrupt-parent : the phandle for the interrupt controller - interrupts : touch controller interrupt - touchscreen-max-pressure : maximum reported pressure - adi,resistance-plate-x : total resistance of X-plate (for pressure diff --git a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt index 9fc47b006fd1..04413da51391 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt @@ -18,7 +18,6 @@ Additional required properties: "ti,ads7846" "ti,ads7873" - interrupt-parent interrupts An interrupt node describing the IRQ line the chip's !PENIRQ pin is connected to. vcc-supply A regulator node for the supply voltage. diff --git a/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt index e459e8546f34..82019bd6094e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt @@ -3,7 +3,6 @@ Required properties: - compatible : "microchip,ar1021-i2c" - reg : I2C slave address -- interrupt-parent : the phandle for the interrupt controller - interrupts : touch controller interrupt Example: diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt index d11f8d615b5d..38b0603f65f3 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt @@ -3,8 +3,6 @@ Required properties: - compatible : "chipone,icn8318" - reg : I2C slave address of the chip (0x40) - - interrupt-parent : a phandle pointing to the interrupt controller - serving the interrupt for this chip - interrupts : interrupt specification for the icn8318 interrupt - wake-gpios : GPIO specification for the WAKE input - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt index df531b5b6a0d..2e1490a8fe74 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt @@ -7,7 +7,6 @@ Required Properties: - xm-gpios: FET gate driver for input of X- - yp-gpios: FET gate driver for input of Y+ - ym-gpios: FET gate driver for input of Y- -- interrupt-parent: phandle for the interrupt controller - interrupts: pen irq interrupt for touch detection - pinctrl-names: "idle", "default", "gpios" - pinctrl-0: pinctrl node for pen/touch detection state pinmux diff --git a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt index b75d4cfd2c36..6ee274aa8b03 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/cyttsp.txt @@ -4,8 +4,6 @@ Required properties: - compatible : must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi" - reg : Device I2C address or SPI chip select number - spi-max-frequency : Maximum SPI clocking speed of the device (for cyttsp-spi) - - interrupt-parent : the phandle for the gpio controller - (see interrupt binding[0]). - interrupts : (gpio) interrupt to which the chip is connected (see interrupt binding[0]). - bootloader-key : the 8-byte bootloader key that is required to switch diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt index 025cf8c9324a..da2dc5d6c98b 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -22,8 +22,6 @@ Required properties: or: "focaltech,ft6236" - reg: I2C slave address of the chip (0x38) - - interrupt-parent: a phandle pointing to the interrupt controller - serving the interrupt for this chip - interrupts: interrupt specification for the touchdetect interrupt diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt index 298e3442f143..92fb2620f5e2 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -3,7 +3,6 @@ Required properties: - compatible: must be "eeti,egalax_ts" - reg: i2c slave address -- interrupt-parent: the phandle for the interrupt controller - interrupts: touch controller interrupt - wakeup-gpios: the gpio pin to be used for waking up the controller and also used as irq pin diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt index 5a19f4c3e9d7..94c4fc644940 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt @@ -3,8 +3,6 @@ Required properties: - compatible : "elan,ektf2127" - reg : I2C slave address of the chip (0x40) - - interrupt-parent : a phandle pointing to the interrupt controller - serving the interrupt for this chip - interrupts : interrupt specification for the ektf2127 interrupt - power-gpios : GPIO specification for the pin connected to the ektf2127's wake input. This needs to be driven high diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt index 1dcff4a43eaa..68291b94fec2 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt @@ -3,7 +3,6 @@ Required properties: - compatible: must be "eeti,exc3000" - reg: i2c slave address -- interrupt-parent: the phandle for the interrupt controller - interrupts: touch controller interrupt - touchscreen-size-x: See touchscreen.txt - touchscreen-size-y: See touchscreen.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt index abfcab3edc66..99d6f9d25335 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt @@ -8,7 +8,6 @@ Required properties: - reg: Memory range of the device. - interrupts: Should be the interrupt number associated with this module within the tscadc unit (<0>). - - interrupt-parent: Should be a phandle to the tscadc unit. - fsl,wires: Should be '<4>' or '<5>' Optional properties: diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt index 0c369d8ebcab..f7e95c52f3c7 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -11,7 +11,6 @@ Required properties: or "goodix,gt928" or "goodix,gt967" - reg : I2C address of the chip. Should be 0x5d or 0x14 - - interrupt-parent : Interrupt controller to which the chip is connected - interrupts : Interrupt to which the chip is connected Optional properties: diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt index 1063c30d53f7..a47c36190b01 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt @@ -3,7 +3,6 @@ Required properties: - compatible : must be "hideep,hideep-ts" - reg : I2C slave address, (e.g. 0x6C). -- interrupt-parent : Interrupt controller to which the chip is connected. - interrupts : Interrupt to which the chip is connected. Optional properties: diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt index 40ac0fe94df6..05e982c3454e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt @@ -3,7 +3,6 @@ Required properties: - compatible: must be "maxim,max11801" - reg: i2c slave address -- interrupt-parent: the phandle for the interrupt controller - interrupts: touch controller interrupt Example: diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt index 7b8944c2cb31..b2ab5498e519 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt @@ -3,7 +3,6 @@ Required properties: - compatible: must be "melfas,mip4_ts" - reg: I2C slave address of the chip (0x48 or 0x34) -- interrupt-parent: interrupt controller to which the chip is connected - interrupts: interrupt to which the chip is connected Optional properties: diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt index d9b7c2ff611e..6805d10d226d 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt @@ -3,8 +3,6 @@ Required properties: - compatible : must be "samsung,s6sy761" - reg : I2C slave address, (e.g. 0x48) -- interrupt-parent : the phandle to the interrupt controller which provides - the interrupt - interrupts : interrupt specification - avdd-supply : analogic power supply - vdd-supply : power supply diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt index 84752de12412..d67e558e5ab5 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt @@ -8,8 +8,6 @@ Required properties: "silead,gsl3675" "silead,gsl3692" - reg : I2C slave address of the chip (0x40) -- interrupt-parent : a phandle pointing to the interrupt controller - serving the interrupt for this chip - interrupts : interrupt specification for the gsl1680 interrupt - power-gpios : Specification for the pin connected to the gsl1680's shutdown input. This needs to be driven high to take the diff --git a/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt index d87ad14f1efe..8f5322e01024 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/sis_i2c.txt @@ -3,8 +3,6 @@ Required properties: - compatible: must be "sis,9200-ts" - reg: i2c slave address -- interrupt-parent: the phandle for the interrupt controller - (see interrupt binding [0]) - interrupts: touch controller interrupt (see interrupt binding [0]) diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt index 9683595cd0f5..0a5d0cb4a280 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt @@ -10,8 +10,6 @@ coordinates. Required properties: - compatible : must be "st,stmfts" - reg : I2C slave address, (e.g. 0x49) -- interrupt-parent : the phandle to the interrupt controller which provides - the interrupt - interrupts : interrupt specification - avdd-supply : analogic power supply - vdd-supply : power supply diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt index 5aaa6b3aa90c..4886c4aa2906 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt @@ -3,7 +3,6 @@ Required properties: - compatible: must be "semtech,sx8654" - reg: i2c slave address -- interrupt-parent: the phandle for the interrupt controller - interrupts: touch controller interrupt Example: diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt index ec365e172236..ed00f61b8c08 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt @@ -9,8 +9,6 @@ Optional properties: - gpios: the interrupt gpio the chip is connected to (trough the penirq pin). The penirq pin goes to low when the panel is touched. (see GPIO binding[1] for more details). -- interrupt-parent: the phandle for the gpio controller - (see interrupt binding[0]). - interrupts: (gpio) interrupt to which the chip is connected (see interrupt binding[0]). - ti,max-rt: maximum pressure. diff --git a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt index fe6a1feef703..27d55a506f18 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt @@ -3,8 +3,6 @@ Zeitec ZET6223 I2C touchscreen controller Required properties: - compatible : "zeitec,zet6223" - reg : I2C slave address of the chip (0x76) -- interrupt-parent : a phandle pointing to the interrupt controller - serving the interrupt for this chip - interrupts : interrupt specification for the zet6223 interrupt Optional properties: |