summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt')
-rw-r--r--Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt37
1 files changed, 0 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
deleted file mode 100644
index c6995dde641b..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Sitronix ST7789V RGB panel with SPI control bus
-
-Required properties:
- - compatible: "sitronix,st7789v"
- - reg: Chip select of the panel on the SPI bus
- - reset-gpios: a GPIO phandle for the reset pin
- - power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
- - backlight: phandle to the backlight used
-
-The generic bindings for the SPI slaves documented in [1] also applies
-
-The device node can contain one 'port' child node with one child
-'endpoint' node, according to the bindings defined in [2]. This
-node should describe panel's video bus.
-
-[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
-[2]: Documentation/devicetree/bindings/graph.txt
-
-Example:
-
-panel@0 {
- compatible = "sitronix,st7789v";
- reg = <0>;
- reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
- backlight = <&pwm_bl>;
- spi-max-frequency = <100000>;
- spi-cpol;
- spi-cpha;
-
- port {
- panel_input: endpoint {
- remote-endpoint = <&tcon0_out_panel>;
- };
- };
-};