summaryrefslogtreecommitdiff
path: root/Documentation/PCI/endpoint/pci-test-function.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/PCI/endpoint/pci-test-function.txt')
-rw-r--r--Documentation/PCI/endpoint/pci-test-function.txt66
1 files changed, 66 insertions, 0 deletions
diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.txt
new file mode 100644
index 000000000000..0c519c9bf94a
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-test-function.txt
@@ -0,0 +1,66 @@
+ PCI TEST
+ Kishon Vijay Abraham I <kishon@ti.com>
+
+Traditionally PCI RC has always been validated by using standard
+PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards.
+However with the addition of EP-core in linux kernel, it is possible
+to configure a PCI controller that can operate in EP mode to work as
+a test device.
+
+The PCI endpoint test device is a virtual device (defined in software)
+used to test the endpoint functionality and serve as a sample driver
+for other PCI endpoint devices (to use the EP framework).
+
+The PCI endpoint test device has the following registers:
+
+ 1) PCI_ENDPOINT_TEST_MAGIC
+ 2) PCI_ENDPOINT_TEST_COMMAND
+ 3) PCI_ENDPOINT_TEST_STATUS
+ 4) PCI_ENDPOINT_TEST_SRC_ADDR
+ 5) PCI_ENDPOINT_TEST_DST_ADDR
+ 6) PCI_ENDPOINT_TEST_SIZE
+ 7) PCI_ENDPOINT_TEST_CHECKSUM
+
+*) PCI_ENDPOINT_TEST_MAGIC
+
+This register will be used to test BAR0. A known pattern will be written
+and read back from MAGIC register to verify BAR0.
+
+*) PCI_ENDPOINT_TEST_COMMAND:
+
+This register will be used by the host driver to indicate the function
+that the endpoint device must perform.
+
+Bitfield Description:
+ Bit 0 : raise legacy IRQ
+ Bit 1 : raise MSI IRQ
+ Bit 2 - 7 : MSI interrupt number
+ Bit 8 : read command (read data from RC buffer)
+ Bit 9 : write command (write data to RC buffer)
+ Bit 10 : copy command (copy data from one RC buffer to another
+ RC buffer)
+
+*) PCI_ENDPOINT_TEST_STATUS
+
+This register reflects the status of the PCI endpoint device.
+
+Bitfield Description:
+ Bit 0 : read success
+ Bit 1 : read fail
+ Bit 2 : write success
+ Bit 3 : write fail
+ Bit 4 : copy success
+ Bit 5 : copy fail
+ Bit 6 : IRQ raised
+ Bit 7 : source address is invalid
+ Bit 8 : destination address is invalid
+
+*) PCI_ENDPOINT_TEST_SRC_ADDR
+
+This register contains the source address (RC buffer address) for the
+COPY/READ command.
+
+*) PCI_ENDPOINT_TEST_DST_ADDR
+
+This register contains the destination address (RC buffer address) for
+the COPY/WRITE command.