summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml21
-rw-r--r--Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt2
-rw-r--r--Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml17
-rw-r--r--Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml58
-rw-r--r--Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml96
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml95
-rw-r--r--Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml76
-rw-r--r--Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml74
-rw-r--r--Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml13
-rw-r--r--Documentation/devicetree/bindings/phy/ti-phy.txt37
-rw-r--r--Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml22
-rw-r--r--Documentation/devicetree/bindings/usb/atmel-usb.txt1
-rw-r--r--Documentation/devicetree/bindings/usb/cdns,usb3.yaml96
-rw-r--r--Documentation/devicetree/bindings/usb/cdns-usb3.txt45
-rw-r--r--Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt9
-rw-r--r--Documentation/devicetree/bindings/usb/dwc2.yaml5
-rw-r--r--Documentation/devicetree/bindings/usb/dwc3.txt3
-rw-r--r--Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml77
-rw-r--r--Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml95
-rw-r--r--Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml1
-rw-r--r--Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml35
-rw-r--r--Documentation/devicetree/bindings/usb/renesas,usbhs.yaml1
-rw-r--r--Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt38
-rw-r--r--Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml82
-rw-r--r--MAINTAINERS20
-rw-r--r--arch/arm/boot/dts/at91-sam9x60ek.dts13
-rw-r--r--arch/arm/boot/dts/bcm2711-rpi-4-b.dts22
-rw-r--r--arch/arm/boot/dts/sam9x60.dtsi14
-rw-r--r--drivers/acpi/bus.c1
-rw-r--r--drivers/bluetooth/ath3k.c93
-rw-r--r--drivers/firmware/Kconfig3
-rw-r--r--drivers/firmware/raspberrypi.c61
-rw-r--r--drivers/net/usb/pegasus.c61
-rw-r--r--drivers/net/usb/rtl8150.c32
-rw-r--r--drivers/pci/controller/pcie-brcmstb.c17
-rw-r--r--drivers/pci/quirks.c57
-rw-r--r--drivers/phy/Kconfig11
-rw-r--r--drivers/phy/Makefile1
-rw-r--r--drivers/phy/broadcom/phy-bcm-ns-usb3.c22
-rw-r--r--drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c13
-rw-r--r--drivers/phy/broadcom/phy-bcm-sr-usb.c19
-rw-r--r--drivers/phy/cadence/phy-cadence-salvo.c8
-rw-r--r--drivers/phy/cadence/phy-cadence-sierra.c24
-rw-r--r--drivers/phy/cadence/phy-cadence-torrent.c2119
-rw-r--r--drivers/phy/freescale/phy-fsl-imx8mq-usb.c79
-rw-r--r--drivers/phy/hisilicon/phy-hi3660-usb3.c2
-rw-r--r--drivers/phy/intel/Kconfig22
-rw-r--r--drivers/phy/intel/Makefile5
-rw-r--r--drivers/phy/intel/phy-intel-keembay-emmc.c307
-rw-r--r--drivers/phy/intel/phy-intel-lgm-combo.c (renamed from drivers/phy/intel/phy-intel-combo.c)0
-rw-r--r--drivers/phy/intel/phy-intel-lgm-emmc.c (renamed from drivers/phy/intel/phy-intel-emmc.c)0
-rw-r--r--drivers/phy/lantiq/phy-lantiq-rcu-usb2.c2
-rw-r--r--drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c2
-rw-r--r--drivers/phy/marvell/phy-pxa-28nm-hsic.c40
-rw-r--r--drivers/phy/marvell/phy-pxa-28nm-usb2.c33
-rw-r--r--drivers/phy/phy-lgm-usb.c284
-rw-r--r--drivers/phy/qualcomm/phy-qcom-apq8064-sata.c21
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c4
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.c1053
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.h80
-rw-r--r--drivers/phy/ralink/phy-ralink-usb.c2
-rw-r--r--drivers/phy/rockchip/Kconfig12
-rw-r--r--drivers/phy/rockchip/Makefile1
-rw-r--r--drivers/phy/rockchip/phy-rockchip-dphy-rx0.c (renamed from drivers/staging/media/phy-rockchip-dphy-rx0/phy-rockchip-dphy-rx0.c)1
-rw-r--r--drivers/phy/samsung/phy-exynos5-usbdrd.c39
-rw-r--r--drivers/phy/samsung/phy-samsung-ufs.c2
-rw-r--r--drivers/phy/socionext/Kconfig10
-rw-r--r--drivers/phy/socionext/Makefile1
-rw-r--r--drivers/phy/socionext/phy-uniphier-ahci.c321
-rw-r--r--drivers/phy/ti/phy-am654-serdes.c325
-rw-r--r--drivers/phy/ti/phy-gmii-sel.c159
-rw-r--r--drivers/phy/ti/phy-j721e-wiz.c1
-rw-r--r--drivers/phy/ti/phy-omap-usb2.c36
-rw-r--r--drivers/reset/Kconfig11
-rw-r--r--drivers/reset/Makefile1
-rw-r--r--drivers/reset/reset-raspberrypi.c122
-rw-r--r--drivers/staging/media/Kconfig2
-rw-r--r--drivers/staging/media/Makefile1
-rw-r--r--drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig13
-rw-r--r--drivers/staging/media/phy-rockchip-dphy-rx0/Makefile2
-rw-r--r--drivers/staging/media/phy-rockchip-dphy-rx0/TODO6
-rw-r--r--drivers/thunderbolt/Kconfig14
-rw-r--r--drivers/thunderbolt/Makefile4
-rw-r--r--drivers/thunderbolt/acpi.c117
-rw-r--r--drivers/thunderbolt/cap.c136
-rw-r--r--drivers/thunderbolt/ctl.c23
-rw-r--r--drivers/thunderbolt/debugfs.c701
-rw-r--r--drivers/thunderbolt/domain.c48
-rw-r--r--drivers/thunderbolt/icm.c5
-rw-r--r--drivers/thunderbolt/lc.c151
-rw-r--r--drivers/thunderbolt/nhi.c90
-rw-r--r--drivers/thunderbolt/nhi_ops.c31
-rw-r--r--drivers/thunderbolt/quirks.c2
-rw-r--r--drivers/thunderbolt/switch.c216
-rw-r--r--drivers/thunderbolt/tb.c207
-rw-r--r--drivers/thunderbolt/tb.h160
-rw-r--r--drivers/thunderbolt/tb_msgs.h1
-rw-r--r--drivers/thunderbolt/tb_regs.h34
-rw-r--r--drivers/thunderbolt/test.c13
-rw-r--r--drivers/thunderbolt/usb4.c251
-rw-r--r--drivers/usb/atm/cxacru.c27
-rw-r--r--drivers/usb/atm/usbatm.c14
-rw-r--r--drivers/usb/c67x00/c67x00-sched.c7
-rw-r--r--drivers/usb/cdns3/cdns3-imx.c191
-rw-r--r--drivers/usb/cdns3/core.c202
-rw-r--r--drivers/usb/cdns3/core.h17
-rw-r--r--drivers/usb/cdns3/drd.c20
-rw-r--r--drivers/usb/cdns3/drd.h5
-rw-r--r--drivers/usb/cdns3/ep0.c10
-rw-r--r--drivers/usb/cdns3/gadget.c276
-rw-r--r--drivers/usb/cdns3/gadget.h11
-rw-r--r--drivers/usb/cdns3/host.c7
-rw-r--r--drivers/usb/chipidea/ci_hdrc_imx.c13
-rw-r--r--drivers/usb/chipidea/ci_hdrc_imx.h2
-rw-r--r--drivers/usb/chipidea/usbmisc_imx.c21
-rw-r--r--drivers/usb/class/cdc-acm.c79
-rw-r--r--drivers/usb/class/cdc-acm.h19
-rw-r--r--drivers/usb/class/cdc-wdm.c72
-rw-r--r--drivers/usb/common/usb-conn-gpio.c32
-rw-r--r--drivers/usb/core/Kconfig14
-rw-r--r--drivers/usb/core/devices.c41
-rw-r--r--drivers/usb/core/driver.c8
-rw-r--r--drivers/usb/core/generic.c4
-rw-r--r--drivers/usb/core/hcd.c6
-rw-r--r--drivers/usb/core/hub.c62
-rw-r--r--drivers/usb/core/message.c180
-rw-r--r--drivers/usb/core/urb.c120
-rw-r--r--drivers/usb/core/usb.h1
-rw-r--r--drivers/usb/dwc2/Kconfig1
-rw-r--r--drivers/usb/dwc2/Makefile2
-rw-r--r--drivers/usb/dwc2/core.h9
-rw-r--r--drivers/usb/dwc2/drd.c180
-rw-r--r--drivers/usb/dwc2/gadget.c42
-rw-r--r--drivers/usb/dwc2/params.c5
-rw-r--r--drivers/usb/dwc2/platform.c43
-rw-r--r--drivers/usb/dwc3/core.c90
-rw-r--r--drivers/usb/dwc3/core.h47
-rw-r--r--drivers/usb/dwc3/debug.h8
-rw-r--r--drivers/usb/dwc3/debugfs.c59
-rw-r--r--drivers/usb/dwc3/dwc3-meson-g12a.c41
-rw-r--r--drivers/usb/dwc3/dwc3-of-simple.c2
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c3
-rw-r--r--drivers/usb/dwc3/dwc3-qcom.c128
-rw-r--r--drivers/usb/dwc3/ep0.c61
-rw-r--r--drivers/usb/dwc3/gadget.c593
-rw-r--r--drivers/usb/dwc3/gadget.h3
-rw-r--r--drivers/usb/dwc3/trace.h17
-rw-r--r--drivers/usb/dwc3/ulpi.c2
-rw-r--r--drivers/usb/early/ehci-dbgp.c15
-rw-r--r--drivers/usb/early/xhci-dbc.c14
-rw-r--r--drivers/usb/gadget/function/f_acm.c8
-rw-r--r--drivers/usb/gadget/function/f_midi.c6
-rw-r--r--drivers/usb/gadget/function/f_ncm.c10
-rw-r--r--drivers/usb/gadget/function/f_printer.c16
-rw-r--r--drivers/usb/gadget/function/f_tcm.c12
-rw-r--r--drivers/usb/gadget/function/f_uvc.c8
-rw-r--r--drivers/usb/gadget/function/u_ether.c2
-rw-r--r--drivers/usb/gadget/function/u_serial.c1
-rw-r--r--drivers/usb/gadget/udc/aspeed-vhub/core.c10
-rw-r--r--drivers/usb/gadget/udc/aspeed-vhub/vhub.h3
-rw-r--r--drivers/usb/gadget/udc/atmel_usba_udc.c68
-rw-r--r--drivers/usb/gadget/udc/atmel_usba_udc.h3
-rw-r--r--drivers/usb/gadget/udc/bcm63xx_udc.c1
-rw-r--r--drivers/usb/gadget/udc/bdc/bdc_core.c9
-rw-r--r--drivers/usb/gadget/udc/core.c82
-rw-r--r--drivers/usb/gadget/udc/fsl_qe_udc.c7
-rw-r--r--drivers/usb/gadget/udc/fsl_udc_core.c9
-rw-r--r--drivers/usb/gadget/udc/lpc32xx_udc.c17
-rw-r--r--drivers/usb/gadget/udc/net2272.c24
-rw-r--r--drivers/usb/gadget/udc/net2272.h1
-rw-r--r--drivers/usb/gadget/udc/net2280.c32
-rw-r--r--drivers/usb/gadget/udc/net2280.h1
-rw-r--r--drivers/usb/gadget/udc/pch_udc.c55
-rw-r--r--drivers/usb/gadget/udc/s3c2410_udc.c3
-rw-r--r--drivers/usb/gadget/udc/tegra-xudc.c60
-rw-r--r--drivers/usb/host/bcma-hcd.c13
-rw-r--r--drivers/usb/host/ehci-npcm7xx.c8
-rw-r--r--drivers/usb/host/ehci-platform.c16
-rw-r--r--drivers/usb/host/ehci-sched.c20
-rw-r--r--drivers/usb/host/ehci-spear.c8
-rw-r--r--drivers/usb/host/fotg210-hcd.c20
-rw-r--r--drivers/usb/host/ohci-hcd.c18
-rw-r--r--drivers/usb/host/oxu210hp-hcd.c21
-rw-r--r--drivers/usb/host/pci-quirks.c35
-rw-r--r--drivers/usb/host/xhci-dbgtty.c6
-rw-r--r--drivers/usb/host/xhci-debugfs.c109
-rw-r--r--drivers/usb/host/xhci-debugfs.h10
-rw-r--r--drivers/usb/host/xhci-mtk.c6
-rw-r--r--drivers/usb/host/xhci-pci.c10
-rw-r--r--drivers/usb/host/xhci-plat.c44
-rw-r--r--drivers/usb/host/xhci-plat.h1
-rw-r--r--drivers/usb/host/xhci-rcar.c43
-rw-r--r--drivers/usb/host/xhci-ring.c23
-rw-r--r--drivers/usb/host/xhci-tegra.c1
-rw-r--r--drivers/usb/host/xhci.c11
-rw-r--r--drivers/usb/host/xhci.h3
-rw-r--r--drivers/usb/image/microtek.c14
-rw-r--r--drivers/usb/isp1760/isp1760-hcd.c20
-rw-r--r--drivers/usb/misc/adutux.c1
-rw-r--r--drivers/usb/misc/appledisplay.c14
-rw-r--r--drivers/usb/misc/legousbtower.c61
-rw-r--r--drivers/usb/misc/usb3503.c18
-rw-r--r--drivers/usb/misc/usb4604.c8
-rw-r--r--drivers/usb/misc/usblcd.c1
-rw-r--r--drivers/usb/misc/yurex.c6
-rw-r--r--drivers/usb/mtu3/mtu3.h6
-rw-r--r--drivers/usb/musb/musb_gadget_ep0.c2
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c2
-rw-r--r--drivers/usb/phy/phy-mv-usb.c18
-rw-r--r--drivers/usb/phy/phy-ulpi-viewport.c12
-rw-r--r--drivers/usb/serial/ftdi_sio.c37
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h7
-rw-r--r--drivers/usb/serial/mos7720.c8
-rw-r--r--drivers/usb/serial/option.c5
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h1
-rw-r--r--drivers/usb/serial/qcserial.c4
-rw-r--r--drivers/usb/storage/isd200.c2
-rw-r--r--drivers/usb/storage/scsiglue.c2
-rw-r--r--drivers/usb/storage/uas.c31
-rw-r--r--drivers/usb/storage/usb.c5
-rw-r--r--drivers/usb/typec/Kconfig24
-rw-r--r--drivers/usb/typec/Makefile2
-rw-r--r--drivers/usb/typec/altmodes/displayport.c2
-rw-r--r--drivers/usb/typec/class.c15
-rw-r--r--drivers/usb/typec/hd3ss3220.c18
-rw-r--r--drivers/usb/typec/mux/Kconfig1
-rw-r--r--drivers/usb/typec/mux/intel_pmc_mux.c207
-rw-r--r--drivers/usb/typec/qcom-pmic-typec.c262
-rw-r--r--drivers/usb/typec/stusb160x.c875
-rw-r--r--drivers/usb/typec/tcpm/Kconfig14
-rw-r--r--drivers/usb/typec/tcpm/Makefile14
-rw-r--r--drivers/usb/typec/tcpm/tcpci.c113
-rw-r--r--drivers/usb/typec/tcpm/tcpci.h25
-rw-r--r--drivers/usb/typec/tcpm/tcpci_maxim.c503
-rw-r--r--drivers/usb/typec/tcpm/tcpci_mt6360.c212
-rw-r--r--drivers/usb/typec/tcpm/tcpm.c362
-rw-r--r--drivers/usb/usbip/usbip_common.c8
-rw-r--r--drivers/usb/usbip/vhci_hcd.c8
-rw-r--r--include/dt-bindings/phy/phy-cadence-torrent.h13
-rw-r--r--include/dt-bindings/phy/phy.h1
-rw-r--r--include/dt-bindings/reset/raspberrypi,firmware-reset.h13
-rw-r--r--include/linux/iopoll.h4
-rw-r--r--include/linux/phy/phy.h2
-rw-r--r--include/linux/usb.h9
-rw-r--r--include/linux/usb/gadget.h27
-rw-r--r--include/linux/usb/pd.h26
-rw-r--r--include/linux/usb/tcpm.h8
-rw-r--r--include/linux/usb/typec.h1
-rw-r--r--include/soc/bcm2835/raspberrypi-firmware.h7
-rw-r--r--sound/usb/6fire/firmware.c38
-rw-r--r--sound/usb/helper.c16
-rw-r--r--sound/usb/helper.h1
-rw-r--r--sound/usb/hiface/pcm.c14
-rw-r--r--sound/usb/line6/driver.c72
-rw-r--r--sound/usb/line6/podhd.c23
-rw-r--r--sound/usb/line6/toneport.c9
-rw-r--r--sound/usb/mixer_scarlett_gen2.c2
-rw-r--r--sound/usb/quirks.c12
-rw-r--r--sound/usb/usx2y/us122l.c42
260 files changed, 12933 insertions, 2874 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index 9fdb319dcf19..a2c63c8b1d10 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -48,6 +48,22 @@ properties:
- compatible
- "#clock-cells"
+ reset:
+ type: object
+
+ properties:
+ compatible:
+ const: raspberrypi,firmware-reset
+
+ "#reset-cells":
+ const: 1
+ description: >
+ The argument is the ID of the firmware reset line to affect.
+
+ required:
+ - compatible
+ - "#reset-cells"
+
additionalProperties: false
required:
@@ -66,5 +82,10 @@ examples:
compatible = "raspberrypi,firmware-clocks";
#clock-cells = <1>;
};
+
+ reset: reset {
+ compatible = "raspberrypi,firmware-reset";
+ #reset-cells = <1>;
+ };
};
...
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
index ed47e5cd067e..7c70f2ad9942 100644
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
@@ -1,7 +1,7 @@
* Freescale i.MX8MQ USB3 PHY binding
Required properties:
-- compatible: Should be "fsl,imx8mq-usb-phy"
+- compatible: Should be "fsl,imx8mq-usb-phy" or "fsl,imx8mp-usb-phy"
- #phys-cells: must be 0 (see phy-bindings.txt in this directory)
- reg: The base address and length of the registers
- clocks: phandles to the clocks for each clock listed in clock-names
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
index 77bb5309918e..edd9d70a672a 100644
--- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -23,7 +23,9 @@ description: |+
properties:
compatible:
- const: intel,lgm-emmc-phy
+ oneOf:
+ - const: intel,lgm-emmc-phy
+ - const: intel,keembay-emmc-phy
"#phy-cells":
const: 0
@@ -34,6 +36,10 @@ properties:
clocks:
maxItems: 1
+ clock-names:
+ items:
+ - const: emmcclk
+
required:
- "#phy-cells"
- compatible
@@ -57,4 +63,13 @@ examples:
#phy-cells = <0>;
};
};
+
+ - |
+ phy@20290000 {
+ compatible = "intel,keembay-emmc-phy";
+ reg = <0x20290000 0x54>;
+ clocks = <&emmc>;
+ clock-names = "emmcclk";
+ #phy-cells = <0>;
+ };
...
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
new file mode 100644
index 000000000000..ce62c0b94daf
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,lgm-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel LGM USB PHY Device Tree Bindings
+
+maintainers:
+ - Vadivel Murugan Ramuthevar <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+properties:
+ compatible:
+ const: intel,lgm-usb-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: USB PHY and Host controller reset
+ - description: APB BUS reset
+ - description: General Hardware reset
+
+ reset-names:
+ items:
+ - const: phy
+ - const: apb
+ - const: phy31
+
+ "#phy-cells":
+ const: 0
+
+required:
+ - compatible
+ - clocks
+ - reg
+ - resets
+ - reset-names
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ usb-phy@e7e00000 {
+ compatible = "intel,lgm-usb-phy";
+ reg = <0xe7e00000 0x10000>;
+ clocks = <&cgu0 153>;
+ resets = <&rcu 0x70 0x24>,
+ <&rcu 0x70 0x26>,
+ <&rcu 0x70 0x28>;
+ reset-names = "phy", "apb", "phy31";
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
index 4071438be2ba..e266ade53d87 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -4,11 +4,13 @@
$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-title: Cadence Torrent SD0801 PHY binding for DisplayPort
+title: Cadence Torrent SD0801 PHY binding
description:
This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
- hardware included with the Cadence MHDP DisplayPort controller.
+ hardware included with the Cadence MHDP DisplayPort controller. Torrent
+ PHY also supports multilink multiprotocol combinations including protocols
+ such as PCIe, USB, SGMII, QSGMII etc.
maintainers:
- Swapnil Jakhade <sjakhade@cadence.com>
@@ -49,13 +51,21 @@ properties:
- const: dptx_phy
resets:
- maxItems: 1
- description:
- Torrent PHY reset.
- See Documentation/devicetree/bindings/reset/reset.txt
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: Torrent PHY reset.
+ - description: Torrent APB reset. This is optional.
+
+ reset-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: torrent_reset
+ - const: torrent_apb
patternProperties:
- '^phy@[0-7]+$':
+ '^phy@[0-3]$':
type: object
description:
Each group of PHY lanes with a single master lane should be represented as a sub-node.
@@ -63,6 +73,8 @@ patternProperties:
reg:
description:
The master lane number. This is the lowest numbered lane in the lane group.
+ minimum: 0
+ maximum: 3
resets:
minItems: 1
@@ -78,15 +90,25 @@ patternProperties:
Specifies the type of PHY for which the group of PHY lanes is used.
Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [1, 2, 3, 4, 5, 6]
+ minimum: 1
+ maximum: 9
cdns,num-lanes:
description:
- Number of DisplayPort lanes.
+ Number of lanes.
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [1, 2, 4]
+ enum: [1, 2, 3, 4]
default: 4
+ cdns,ssc-mode:
+ description:
+ Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
+ EXTERNAL_SSC or INTERNAL_SSC.
+ Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ default: 0
+
cdns,max-bit-rate:
description:
Maximum DisplayPort link bit rate to use, in Mbps
@@ -99,6 +121,7 @@ patternProperties:
- resets
- "#phy-cells"
- cdns,phy-type
+ - cdns,num-lanes
additionalProperties: false
@@ -111,6 +134,7 @@ required:
- reg
- reg-names
- resets
+ - reset-names
additionalProperties: false
@@ -128,18 +152,56 @@ examples:
<0xf0 0xfb030a00 0x0 0x00000040>;
reg-names = "torrent_phy", "dptx_phy";
resets = <&phyrst 0>;
+ reset-names = "torrent_reset";
clocks = <&ref_clk>;
clock-names = "refclk";
#address-cells = <1>;
#size-cells = <0>;
phy@0 {
- reg = <0>;
- resets = <&phyrst 1>, <&phyrst 2>,
- <&phyrst 3>, <&phyrst 4>;
- #phy-cells = <0>;
- cdns,phy-type = <PHY_TYPE_DP>;
- cdns,num-lanes = <4>;
- cdns,max-bit-rate = <8100>;
+ reg = <0>;
+ resets = <&phyrst 1>, <&phyrst 2>,
+ <&phyrst 3>, <&phyrst 4>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_DP>;
+ cdns,num-lanes = <4>;
+ cdns,max-bit-rate = <8100>;
+ };
+ };
+ };
+ - |
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/phy/phy-cadence-torrent.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ torrent-phy@f0fb500000 {
+ compatible = "cdns,torrent-phy";
+ reg = <0xf0 0xfb500000 0x0 0x00100000>;
+ reg-names = "torrent_phy";
+ resets = <&phyrst 0>, <&phyrst 1>;
+ reset-names = "torrent_reset", "torrent_apb";
+ clocks = <&ref_clk>;
+ clock-names = "refclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy@0 {
+ reg = <0>;
+ resets = <&phyrst 2>, <&phyrst 3>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ cdns,num-lanes = <2>;
+ cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
+ };
+
+ phy@2 {
+ reg = <2>;
+ resets = <&phyrst 4>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_SGMII>;
+ cdns,num-lanes = <1>;
+ cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
};
};
};
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
index ef8ae9f73092..33974ad10afe 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -13,17 +13,21 @@ maintainers:
properties:
compatible:
enum:
+ - qcom,sc7180-qmp-usb3-dp-phy
- qcom,sc7180-qmp-usb3-phy
+ - qcom,sdm845-qmp-usb3-dp-phy
- qcom,sdm845-qmp-usb3-phy
reg:
items:
- - description: Address and length of PHY's common serdes block.
+ - description: Address and length of PHY's USB serdes block.
- description: Address and length of the DP_COM control block.
+ - description: Address and length of PHY's DP serdes block.
reg-names:
items:
- - const: reg-base
+ - const: usb
- const: dp_com
+ - const: dp
"#clock-cells":
enum: [ 1, 2 ]
@@ -74,16 +78,74 @@ properties:
#Required nodes:
patternProperties:
- "^phy@[0-9a-f]+$":
+ "^usb3-phy@[0-9a-f]+$":
type: object
description:
- Each device node of QMP phy is required to have as many child nodes as
- the number of lanes the PHY has.
+ The USB3 PHY.
+
+ properties:
+ reg:
+ items:
+ - description: Address and length of TX.
+ - description: Address and length of RX.
+ - description: Address and length of PCS.
+ - description: Address and length of TX2.
+ - description: Address and length of RX2.
+ - description: Address and length of pcs_misc.
+
+ clocks:
+ items:
+ - description: pipe clock
+
+ clock-names:
+ items:
+ - const: pipe0
+
+ clock-output-names:
+ items:
+ - const: usb3_phy_pipe_clk_src
+
+ '#clock-cells':
+ const: 0
+
+ '#phy-cells':
+ const: 0
+
+ required:
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#phy-cells'
+
+ "^dp-phy@[0-9a-f]+$":
+ type: object
+ description:
+ The DP PHY.
+
+ properties:
+ reg:
+ items:
+ - description: Address and length of TX.
+ - description: Address and length of RX.
+ - description: Address and length of PCS.
+ - description: Address and length of TX2.
+ - description: Address and length of RX2.
+
+ '#clock-cells':
+ const: 1
+
+ '#phy-cells':
+ const: 0
+
+ required:
+ - reg
+ - '#clock-cells'
+ - '#phy-cells'
required:
- compatible
- reg
- - reg-names
- "#clock-cells"
- "#address-cells"
- "#size-cells"
@@ -101,14 +163,15 @@ examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
usb_1_qmpphy: phy-wrapper@88e9000 {
- compatible = "qcom,sdm845-qmp-usb3-phy";
+ compatible = "qcom,sdm845-qmp-usb3-dp-phy";
reg = <0x088e9000 0x18c>,
- <0x088e8000 0x10>;
- reg-names = "reg-base", "dp_com";
+ <0x088e8000 0x10>,
+ <0x088ea000 0x40>;
+ reg-names = "usb", "dp_com", "dp";
#clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x088e9000 0x1000>;
+ ranges = <0x0 0x088e9000 0x2000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
@@ -123,7 +186,7 @@ examples:
vdda-phy-supply = <&vdda_usb2_ss_1p2>;
vdda-pll-supply = <&vdda_usb2_ss_core>;
- phy@200 {
+ usb3-phy@200 {
reg = <0x200 0x128>,
<0x400 0x200>,
<0xc00 0x218>,
@@ -136,4 +199,14 @@ examples:
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
};
+
+ dp-phy@88ea200 {
+ reg = <0xa200 0x200>,
+ <0xa400 0x200>,
+ <0xaa00 0x200>,
+ <0xa600 0x200>,
+ <0xa800 0x200>;
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
};
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
new file mode 100644
index 000000000000..bab2ff4d9dc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-ahci-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier AHCI PHY
+
+description: |
+ This describes the deivcetree bindings for PHY interfaces built into
+ AHCI controller implemented on Socionext UniPhier SoCs.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pxs2-ahci-phy
+ - socionext,uniphier-pxs3-ahci-phy
+
+ reg:
+ description: PHY register region (offset and length)
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ oneOf:
+ - items: # for PXs2
+ - const: link
+ - items: # for others
+ - const: link
+ - const: phy
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: link
+ - const: phy
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ ahci-glue@65700000 {
+ compatible = "socionext,uniphier-pxs3-ahci-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65700000 0x100>;
+
+ ahci_phy: phy@10 {
+ compatible = "socionext,uniphier-pxs3-ahci-phy";
+ reg = <0x10 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 28>, <&sys_clk 30>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 28>, <&sys_rst 30>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
new file mode 100644
index 000000000000..15207ca9548f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,omap-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP USB2 PHY
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+ - Roger Quadros <rogerq@ti.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ti,dra7x-usb2
+ - ti,dra7x-usb2-phy2
+ - ti,am654-usb2
+ - enum:
+ - ti,omap-usb2
+ - items:
+ - const: ti,am437x-usb2
+ - items:
+ - const: ti,omap-usb2
+
+ reg:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ minItems: 1
+ items:
+ - description: wakeup clock
+ - description: reference clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: wkupclk
+ - const: refclk
+
+ syscon-phy-power:
+ $ref: /schemas/types.yaml#definitions/phandle-array
+ description:
+ phandle/offset pair. Phandle to the system control module and
+ register offset to power on/off the PHY.
+
+ ctrl-module:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description:
+ (deprecated) phandle of the control module used by PHY driver
+ to power on the PHY. Use syscon-phy-power instead.
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ usb0_phy: phy@4100000 {
+ compatible = "ti,am654-usb2", "ti,omap-usb2";
+ reg = <0x4100000 0x54>;
+ syscon-phy-power = <&scm_conf 0x4000>;
+ clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
+ clock-names = "wkupclk", "refclk";
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index 5ffc95c62909..c33e9bc79521 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -45,9 +45,15 @@ properties:
ranges: true
assigned-clocks:
+ minItems: 1
maxItems: 2
assigned-clock-parents:
+ minItems: 1
+ maxItems: 2
+
+ assigned-clock-rates:
+ minItems: 1
maxItems: 2
typec-dir-gpios:
@@ -119,9 +125,10 @@ patternProperties:
logic.
properties:
clocks:
+ minItems: 2
maxItems: 4
- description: Phandle to four clock nodes representing the inputs to
- refclk_dig
+ description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
+ the inputs to refclk_dig
"#clock-cells":
const: 0
@@ -203,7 +210,7 @@ examples:
};
refclk-dig {
- clocks = <&k3_clks 292 11>, <&k3_clks 292 0>,
+ clocks = <&k3_clks 292 11>, <&k3_clks 292 0>,
<&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
#clock-cells = <0>;
assigned-clocks = <&wiz0_refclk_dig>;
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 8f93c3b694a7..60c9d0ac75e6 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -27,43 +27,6 @@ omap_control_usb: omap-control-usb@4a002300 {
reg-names = "otghs_control";
};
-OMAP USB2 PHY
-
-Required properties:
- - compatible: Should be "ti,omap-usb2"
- Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
- DRA7x
- Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
- in DRA7x
- Should be "ti,am654-usb2" for the USB2 PHYs on AM654.
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
- phandle while referencing this phy.
- - clocks: a list of phandles and clock-specifier pairs, one for each entry in
- clock-names.
- - clock-names: should include:
- * "wkupclk" - wakeup clock.
- * "refclk" - reference clock (optional).
-
-Deprecated properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
- the PHY.
-
-Recommended properies:
-- syscon-phy-power : phandle/offset pair. Phandle to the system control
- module and the register offset to power on/off the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb2phy@4a0ad080 {
- compatible = "ti,omap-usb2";
- reg = <0x4a0ad080 0x58>;
- ctrl-module = <&omap_control_usb>;
- #phy-cells = <0>;
- clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
- clock-names = "wkupclk", "refclk";
-};
-
TI PIPE3 PHY
Required properties:
diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index 5b04a7dfa018..c0058332b967 100644
--- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -25,13 +25,14 @@ description: |
The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
host-only mode.
- The Amlogic GXL & GXM SoCs doesn't embed an USB3 PHY.
+ The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY.
properties:
compatible:
enum:
- amlogic,meson-gxl-usb-ctrl
- amlogic,meson-gxm-usb-ctrl
+ - amlogic,meson-axg-usb-ctrl
- amlogic,meson-g12a-usb-ctrl
- amlogic,meson-a1-usb-ctrl
@@ -155,6 +156,25 @@ allOf:
properties:
compatible:
enum:
+ - amlogic,meson-axg-usb-ctrl
+
+ then:
+ properties:
+ phy-names:
+ items:
+ - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+ clocks:
+ minItems: 2
+ clock-names:
+ items:
+ - const: usb_ctrl
+ - const: ddr
+ required:
+ - clock-names
+ - if:
+ properties:
+ compatible:
+ enum:
- amlogic,meson-a1-usb-ctrl
then:
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 423b99a8fd97..a4002624ba14 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -82,6 +82,7 @@ Required properties:
"atmel,at91sam9rl-udc"
"atmel,at91sam9g45-udc"
"atmel,sama5d3-udc"
+ "microchip,sam9x60-udc"
- reg: Address and length of the register set for the device
- interrupts: Should contain usba interrupt
- clocks: Should reference the peripheral and host clocks
diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
new file mode 100644
index 000000000000..ac20b98e9910
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/cdns,usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence USBSS-DRD controller bindings
+
+maintainers:
+ - Pawel Laszczak <pawell@cadence.com>
+
+properties:
+ compatible:
+ const: cdns,usb3
+
+ reg:
+ items:
+ - description: OTG controller registers
+ - description: XHCI Host controller registers
+ - description: DEVICE controller registers
+
+ reg-names:
+ items:
+ - const: otg
+ - const: xhci
+ - const: dev
+
+ interrupts:
+ items:
+ - description: OTG/DRD controller interrupt
+ - description: XHCI host controller interrupt
+ - description: Device controller interrupt
+
+ interrupt-names:
+ items:
+ - const: host
+ - const: peripheral
+ - const: otg
+
+ dr_mode:
+ enum: [host, otg, peripheral]
+
+ maximum-speed:
+ enum: [super-speed, high-speed, full-speed]
+
+ phys:
+ minItems: 1
+ maxItems: 2
+
+ phy-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ anyOf:
+ - const: cdns3,usb2-phy
+ - const: cdns3,usb3-phy
+
+ cdns,on-chip-buff-size:
+ description:
+ size of memory intended as internal memory for endpoints
+ buffers expressed in KB
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cdns,phyrst-a-enable:
+ description: Enable resetting of PHY if Rx fail is detected
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usb@6000000 {
+ compatible = "cdns,usb3";
+ reg = <0x00 0x6000000 0x00 0x10000>,
+ <0x00 0x6010000 0x00 0x10000>,
+ <0x00 0x6020000 0x00 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host", "peripheral", "otg";
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
deleted file mode 100644
index b7dc606d37b5..000000000000
--- a/Documentation/devicetree/bindings/usb/cdns-usb3.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Binding for the Cadence USBSS-DRD controller
-
-Required properties:
- - reg: Physical base address and size of the controller's register areas.
- Controller has 3 different regions:
- - HOST registers area
- - DEVICE registers area
- - OTG/DRD registers area
- - reg-names - register memory area names:
- "xhci" - for HOST registers space
- "dev" - for DEVICE registers space
- "otg" - for OTG/DRD registers space
- - compatible: Should contain: "cdns,usb3"
- - interrupts: Interrupts used by cdns3 controller:
- "host" - interrupt used by XHCI driver.
- "peripheral" - interrupt used by device driver
- "otg" - interrupt used by DRD/OTG part of driver
-
-Optional properties:
- - maximum-speed : valid arguments are "super-speed", "high-speed" and
- "full-speed"; refer to usb/generic.txt
- - dr_mode: Should be one of "host", "peripheral" or "otg".
- - phys: reference to the USB PHY
- - phy-names: from the *Generic PHY* bindings;
- Supported names are:
- - cdns3,usb2-phy
- - cdns3,usb3-phy
-
- - cdns,on-chip-buff-size : size of memory intended as internal memory for endpoints
- buffers expressed in KB
-
-Example:
- usb@f3000000 {
- compatible = "cdns,usb3";
- interrupts = <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_USB_IRQ 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host", "peripheral", "otg";
- reg = <0xf3000000 0x10000>, /* memory area for HOST registers */
- <0xf3010000 0x10000>, /* memory area for DEVICE registers */
- <0xf3020000 0x10000>; /* memory area for OTG/DRD registers */
- reg-names = "xhci", "dev", "otg";
- phys = <&usb2_phy>, <&usb3_phy>;
- phy-names = "cdns3,usb2-phy", "cnds3,usb3-phy";
- };
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 51376cbe5f3d..a5c5db6a0b2d 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -100,6 +100,15 @@ i.mx specific properties
It's recommended to specify the over current polarity.
- power-active-high: power signal polarity is active high
- external-vbus-divider: enables off-chip resistor divider for Vbus
+- samsung,picophy-pre-emp-curr-control: HS Transmitter Pre-Emphasis Current
+ Control. This signal controls the amount of current sourced to the
+ USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition.
+ The range is from 0x0 to 0x3, the default value is 0x1.
+ Details can refer to TXPREEMPAMPTUNE0 bits of USBNC_n_PHY_CFG1.
+- samsung,picophy-dc-vol-level-adjust: HS DC Voltage Level Adjustment.
+ Adjust the high-speed transmitter DC level voltage.
+ The range is from 0x0 to 0xf, the default value is 0x3.
+ Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
Example:
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index ffa157a0fce7..e5ee51b7b470 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -39,6 +39,7 @@ properties:
- amlogic,meson-g12a-usb
- const: snps,dwc2
- const: amcc,dwc-otg
+ - const: apm,apm82181-dwc-otg
- const: snps,dwc2
- const: st,stm32f4x9-fsotg
- const: st,stm32f4x9-hsotg
@@ -102,6 +103,10 @@ properties:
dr_mode:
enum: [host, peripheral, otg]
+ usb-role-switch:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Support role switch.
+
g-rx-fifo-size:
$ref: /schemas/types.yaml#/definitions/uint32
description: size of rx fifo size in gadget mode.
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index d03edf9d3935..1aae2b6160c1 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -78,6 +78,9 @@ Optional properties:
park mode are disabled.
- snps,dis_metastability_quirk: when set, disable metastability workaround.
CAUTION: use only if you are absolutely sure of it.
+ - snps,dis-split-quirk: when set, change the way URBs are handled by the
+ driver. Needed to avoid -EPROTO errors with usbhid
+ on some devices (Hikey 970).
- snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
utmi_l1_suspend_n, false when asserts utmi_sleep_n
- snps,hird-threshold: HIRD threshold
diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
new file mode 100644
index 000000000000..dd32c10ce6c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/intel,keembay-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay DWC3 USB controller
+
+maintainers:
+ - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+
+properties:
+ compatible:
+ const: intel,keembay-dwc3
+
+ clocks:
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: async_master
+ - const: ref
+ - const: alt_ref
+ - const: suspend
+
+ ranges: true
+
+ '#address-cells':
+ enum: [ 1, 2 ]
+
+ '#size-cells':
+ enum: [ 1, 2 ]
+
+# Required child node:
+
+patternProperties:
+ "^dwc3@[0-9a-f]+$":
+ type: object
+ description:
+ A child node must exist to represent the core DWC3 IP block.
+ The content of the node is defined in dwc3.txt.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #define KEEM_BAY_A53_AUX_USB
+ #define KEEM_BAY_A53_AUX_USB_REF
+ #define KEEM_BAY_A53_AUX_USB_ALT_REF
+ #define KEEM_BAY_A53_AUX_USB_SUSPEND
+
+ usb {
+ compatible = "intel,keembay-dwc3";
+ clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>,
+ <&scmi_clk KEEM_BAY_A53_AUX_USB_REF>,
+ <&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>,
+ <&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>;
+ clock-names = "async_master", "ref", "alt_ref", "suspend";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ dwc3@34000000 {
+ compatible = "snps,dwc3";
+ reg = <0x34000000 0x10000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "peripheral";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
new file mode 100644
index 000000000000..1e8e1c22180e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller DT bindings
+
+maintainers:
+ - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+ Mediatek MT6360 is a multi-functional device. It integrates charger, ADC, flash, RGB indicators,
+ regulators (BUCKs/LDOs), and TypeC Port Switch with Power Delivery controller.
+ This document only describes MT6360 Type-C Port Switch and Power Delivery controller.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt6360-tcpc
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: PD_IRQB
+
+ connector:
+ type: object
+ $ref: ../connector/usb-connector.yaml#
+ description:
+ Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/usb/pd.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mt6360@34 {
+ compatible = "mediatek,mt6360";
+ reg = <0x34>;
+ tcpc {
+ compatible = "mediatek,mt6360-tcpc";
+ interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "PD_IRQB";
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&usb_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&usb_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&dp_aux>;
+ };
+ };
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml
index add9f7b66da0..0f078bd0a3e5 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml
@@ -30,6 +30,7 @@ properties:
- renesas,xhci-r8a774a1 # RZ/G2M
- renesas,xhci-r8a774b1 # RZ/G2N
- renesas,xhci-r8a774c0 # RZ/G2E
+ - renesas,xhci-r8a774e1 # RZ/G2H
- renesas,xhci-r8a7795 # R-Car H3
- renesas,xhci-r8a7796 # R-Car M3-W
- renesas,xhci-r8a77961 # R-Car M3-W+
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
index e3cdeab1199f..929a3f413b44 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
@@ -16,6 +16,7 @@ properties:
- renesas,r8a774a1-usb3-peri # RZ/G2M
- renesas,r8a774b1-usb3-peri # RZ/G2N
- renesas,r8a774c0-usb3-peri # RZ/G2E
+ - renesas,r8a774e1-usb3-peri # RZ/G2H
- renesas,r8a7795-usb3-peri # R-Car H3
- renesas,r8a7796-usb3-peri # R-Car M3-W
- renesas,r8a77961-usb3-peri # R-Car M3-W+
@@ -52,11 +53,24 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle of a companion.
- port:
+ ports:
description: |
any connector to the data bus of this controller should be modelled
using the OF graph bindings specified, if the "usb-role-switch"
property is used.
+ type: object
+ properties:
+ port@0:
+ type: object
+ description: High Speed (HS) data bus.
+
+ port@1:
+ type: object
+ description: Super Speed (SS) data bus.
+
+ required:
+ - port@0
+ - port@1
required:
- compatible
@@ -79,9 +93,20 @@ examples:
companion = <&xhci0>;
usb-role-switch;
- port {
- usb3_role_switch: endpoint {
- remote-endpoint = <&hd3ss3220_ep>;
- };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ usb3_hs_ep: endpoint {
+ remote-endpoint = <&hs_ep>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ usb3_role_switch: endpoint {
+ remote-endpoint = <&hd3ss3220_out_ep>;
+ };
+ };
};
};
diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
index af4826fb6824..737c1f47b7de 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -39,6 +39,7 @@ properties:
- renesas,usbhs-r8a774a1 # RZ/G2M
- renesas,usbhs-r8a774b1 # RZ/G2N
- renesas,usbhs-r8a774c0 # RZ/G2E
+ - renesas,usbhs-r8a774e1 # RZ/G2H
- renesas,usbhs-r8a7795 # R-Car H3
- renesas,usbhs-r8a7796 # R-Car M3-W
- renesas,usbhs-r8a77961 # R-Car M3-W+
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
deleted file mode 100644
index 2bd21b22ce95..000000000000
--- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-TI HD3SS3220 TypeC DRP Port Controller.
-
-Required properties:
- - compatible: Must be "ti,hd3ss3220".
- - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
- - interrupts: An interrupt specifier.
-
-Required sub-node:
- - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
- bindings of the connector node are specified in:
-
- Documentation/devicetree/bindings/connector/usb-connector.yaml
-
-Example:
-hd3ss3220@47 {
- compatible = "ti,hd3ss3220";
- reg = <0x47>;
- interrupt-parent = <&gpio6>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-
- connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- data-role = "dual";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
- hd3ss3220_ep: endpoint {
- remote-endpoint = <&usb3_role_switch>;
- };
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
new file mode 100644
index 000000000000..5fe9e6211ba2
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,hd3ss3220.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI HD3SS3220 TypeC DRP Port Controller
+
+maintainers:
+ - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |-
+ HD3SS3220 is a USB SuperSpeed (SS) 2:1 mux with DRP port controller. The device provides Channel
+ Configuration (CC) logic and 5V VCONN sourcing for ecosystems implementing USB Type-C. The
+ HD3SS3220 can be configured as a Downstream Facing Port (DFP), Upstream Facing Port (UFP) or a
+ Dual Role Port (DRP) making it ideal for any application.
+
+properties:
+ compatible:
+ const: ti,hd3ss3220
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ports:
+ description: OF graph bindings (specified in bindings/graph.txt) that model
+ SS data bus to the SS capable connector.
+ type: object
+ properties:
+ port@0:
+ type: object
+ description: Super Speed (SS) MUX inputs connected to SS capable connector.
+ $ref: /connector/usb-connector.yaml#/properties/ports/properties/port@1
+
+ port@1:
+ type: object
+ description: Output of 2:1 MUX connected to Super Speed (SS) data bus.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hd3ss3220@47 {
+ compatible = "ti,hd3ss3220";
+ reg = <0x47>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hd3ss3220_in_ep: endpoint {
+ remote-endpoint = <&ss_ep>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ hd3ss3220_out_ep: endpoint {
+ remote-endpoint = <&usb3_role_switch>;
+ };
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 7473a33386fa..1975f409e684 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3454,6 +3454,14 @@ F: drivers/bus/brcmstb_gisb.c
F: drivers/pci/controller/pcie-brcmstb.c
N: brcmstb
+BROADCOM BDC DRIVER
+M: Al Cooper <alcooperx@gmail.com>
+L: linux-usb@vger.kernel.org
+L: bcm-kernel-feedback-list@broadcom.com
+S: Maintained
+F: Documentation/devicetree/bindings/usb/brcm,bdc.txt
+F: drivers/usb/gadget/udc/bdc/
+
BROADCOM BMIPS CPUFREQ DRIVER
M: Markus Mayer <mmayer@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
@@ -3831,6 +3839,16 @@ S: Orphan
F: Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
F: drivers/mtd/nand/raw/cadence-nand-controller.c
+CADENCE USB3 DRD IP DRIVER
+M: Peter Chen <peter.chen@nxp.com>
+M: Pawel Laszczak <pawell@cadence.com>
+M: Roger Quadros <rogerq@ti.com>
+L: linux-usb@vger.kernel.org
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
+F: Documentation/devicetree/bindings/usb/cdns-usb3.txt
+F: drivers/usb/cdns3/
+
CADET FM/AM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org
@@ -11037,7 +11055,7 @@ F: net/dsa/tag_mtk.c
MEDIATEK USB3 DRD IP DRIVER
M: Chunfeng Yun <chunfeng.yun@mediatek.com>
-L: linux-usb@vger.kernel.org (moderated for non-subscribers)
+L: linux-usb@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
S: Maintained
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index ca15ff8fea18..eae28b82c7fd 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -563,6 +563,12 @@
atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
+
+ usb0 {
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
}; /* pinctrl */
&pmc {
@@ -666,6 +672,13 @@
};
};
+&usb0 {
+ atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+};
+
&usb1 {
num-ports = <3>;
atmel,vbus-gpio = <0
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 222d7825e1ab..e94244a215af 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -4,6 +4,8 @@
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-usb-peripheral.dtsi"
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
/ {
compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
model = "Raspberry Pi 4 Model B";
@@ -88,6 +90,11 @@
"";
status = "okay";
};
+
+ reset: reset {
+ compatible = "raspberrypi,firmware-reset";
+ #reset-cells = <1>;
+ };
};
&gpio {
@@ -207,6 +214,21 @@
};
};
+&pcie0 {
+ pci@1,0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ reg = <0 0 0 0 0>;
+
+ usb@1,0 {
+ reg = <0x10000 0 0 0 0>;
+ resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
+ };
+ };
+};
+
/* uart0 communicates with the BT module */
&uart0 {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index d10843da4a85..42f76212d472 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -69,6 +69,20 @@
#size-cells = <1>;
ranges;
+ usb0: gadget@500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "microchip,sam9x60-udc";
+ reg = <0x00500000 0x100000
+ 0xf803c000 0x400>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ clock-names = "pclk", "hclk";
+ assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ assigned-clock-rates = <480000000>;
+ status = "disabled";
+ };
+
usb1: ohci@600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 113c661eb848..1682f8b454a2 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -555,6 +555,7 @@ struct device *acpi_get_first_physical_node(struct acpi_device *adev)
mutex_unlock(physical_node_lock);
return phys_dev;
}
+EXPORT_SYMBOL_GPL(acpi_get_first_physical_node);
static struct acpi_device *acpi_primary_dev_companion(struct acpi_device *adev,
const struct device *dev)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 4ce270513695..759d7828931d 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -212,19 +212,16 @@ static int ath3k_load_firmware(struct usb_device *udev,
BT_DBG("udev %p", udev);
- pipe = usb_sndctrlpipe(udev, 0);
-
send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
if (!send_buf) {
BT_ERR("Can't allocate memory chunk for firmware");
return -ENOMEM;
}
- memcpy(send_buf, firmware->data, FW_HDR_SIZE);
- err = usb_control_msg(udev, pipe, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR,
- 0, 0, send_buf, FW_HDR_SIZE,
- USB_CTRL_SET_TIMEOUT);
- if (err < 0) {
+ err = usb_control_msg_send(udev, 0, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR,
+ 0, 0, firmware->data, FW_HDR_SIZE,
+ USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
+ if (err) {
BT_ERR("Can't change to loading configuration err");
goto error;
}
@@ -259,44 +256,19 @@ error:
static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
{
- int ret, pipe = 0;
- char *buf;
-
- buf = kmalloc(sizeof(*buf), GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- pipe = usb_rcvctrlpipe(udev, 0);
- ret = usb_control_msg(udev, pipe, ATH3K_GETSTATE,
- USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
- buf, sizeof(*buf), USB_CTRL_SET_TIMEOUT);
-
- *state = *buf;
- kfree(buf);
-
- return ret;
+ return usb_control_msg_recv(udev, 0, ATH3K_GETSTATE,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ state, 1, USB_CTRL_SET_TIMEOUT,
+ GFP_KERNEL);
}
static int ath3k_get_version(struct usb_device *udev,
struct ath3k_version *version)
{
- int ret, pipe = 0;
- struct ath3k_version *buf;
- const int size = sizeof(*buf);
-
- buf = kmalloc(size, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- pipe = usb_rcvctrlpipe(udev, 0);
- ret = usb_control_msg(udev, pipe, ATH3K_GETVERSION,
- USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
- buf, size, USB_CTRL_SET_TIMEOUT);
-
- memcpy(version, buf, size);
- kfree(buf);
-
- return ret;
+ return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ version, sizeof(*version), USB_CTRL_SET_TIMEOUT,
+ GFP_KERNEL);
}
static int ath3k_load_fwfile(struct usb_device *udev,
@@ -316,13 +288,11 @@ static int ath3k_load_fwfile(struct usb_device *udev,
}
size = min_t(uint, count, FW_HDR_SIZE);
- memcpy(send_buf, firmware->data, size);
- pipe = usb_sndctrlpipe(udev, 0);
- ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
- USB_TYPE_VENDOR, 0, 0, send_buf,
- size, USB_CTRL_SET_TIMEOUT);
- if (ret < 0) {
+ ret = usb_control_msg_send(udev, 0, ATH3K_DNLOAD, USB_TYPE_VENDOR, 0, 0,
+ firmware->data, size, USB_CTRL_SET_TIMEOUT,
+ GFP_KERNEL);
+ if (ret) {
BT_ERR("Can't change to loading configuration err");
kfree(send_buf);
return ret;
@@ -355,23 +325,19 @@ static int ath3k_load_fwfile(struct usb_device *udev,
return 0;
}
-static int ath3k_switch_pid(struct usb_device *udev)
+static void ath3k_switch_pid(struct usb_device *udev)
{
- int pipe = 0;
-
- pipe = usb_sndctrlpipe(udev, 0);
- return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
- USB_TYPE_VENDOR, 0, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+ usb_control_msg_send(udev, 0, USB_REG_SWITCH_VID_PID, USB_TYPE_VENDOR,
+ 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
}
static int ath3k_set_normal_mode(struct usb_device *udev)
{
unsigned char fw_state;
- int pipe = 0, ret;
+ int ret;
ret = ath3k_get_state(udev, &fw_state);
- if (ret < 0) {
+ if (ret) {
BT_ERR("Can't get state to change to normal mode err");
return ret;
}
@@ -381,10 +347,9 @@ static int ath3k_set_normal_mode(struct usb_device *udev)
return 0;
}
- pipe = usb_sndctrlpipe(udev, 0);
- return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
- USB_TYPE_VENDOR, 0, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+ return usb_control_msg_send(udev, 0, ATH3K_SET_NORMAL_MODE,
+ USB_TYPE_VENDOR, 0, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
}
static int ath3k_load_patch(struct usb_device *udev)
@@ -397,7 +362,7 @@ static int ath3k_load_patch(struct usb_device *udev)
int ret;
ret = ath3k_get_state(udev, &fw_state);
- if (ret < 0) {
+ if (ret) {
BT_ERR("Can't get state to change to load ram patch err");
return ret;
}
@@ -408,7 +373,7 @@ static int ath3k_load_patch(struct usb_device *udev)
}
ret = ath3k_get_version(udev, &fw_version);
- if (ret < 0) {
+ if (ret) {
BT_ERR("Can't get version to change to load ram patch err");
return ret;
}
@@ -449,13 +414,13 @@ static int ath3k_load_syscfg(struct usb_device *udev)
int clk_value, ret;
ret = ath3k_get_state(udev, &fw_state);
- if (ret < 0) {
+ if (ret) {
BT_ERR("Can't get state to change to load configuration err");
return -EBUSY;
}
ret = ath3k_get_version(udev, &fw_version);
- if (ret < 0) {
+ if (ret) {
BT_ERR("Can't get version to change to load ram patch err");
return ret;
}
@@ -529,7 +494,7 @@ static int ath3k_probe(struct usb_interface *intf,
return ret;
}
ret = ath3k_set_normal_mode(udev);
- if (ret < 0) {
+ if (ret) {
BT_ERR("Set normal mode failed");
return ret;
}
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index fbd785dd0513..4843e94713a4 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -178,9 +178,8 @@ config ISCSI_IBFT
Otherwise, say N.
config RASPBERRYPI_FIRMWARE
- bool "Raspberry Pi Firmware Driver"
+ tristate "Raspberry Pi Firmware Driver"
depends on BCM2835_MBOX
- default USB_PCI
help
This option enables support for communicating with the firmware on the
Raspberry Pi.
diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
index 8f2fb4c562da..2371d08bdd17 100644
--- a/drivers/firmware/raspberrypi.c
+++ b/drivers/firmware/raspberrypi.c
@@ -12,8 +12,6 @@
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
#include <soc/bcm2835/raspberrypi-firmware.h>
#define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf))
@@ -21,8 +19,6 @@
#define MBOX_DATA28(msg) ((msg) & ~0xf)
#define MBOX_CHAN_PROPERTY 8
-#define VL805_PCI_CONFIG_VERSION_OFFSET 0x50
-
static struct platform_device *rpi_hwmon;
static struct platform_device *rpi_clk;
@@ -301,63 +297,6 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
}
EXPORT_SYMBOL_GPL(rpi_firmware_get);
-/*
- * The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that
- * implements xHCI. After a PCI reset, VL805's firmware may either be loaded
- * directly from an EEPROM or, if not present, by the SoC's co-processor,
- * VideoCore. RPi4's VideoCore OS contains both the non public firmware load
- * logic and the VL805 firmware blob. This function triggers the aforementioned
- * process.
- */
-int rpi_firmware_init_vl805(struct pci_dev *pdev)
-{
- struct device_node *fw_np;
- struct rpi_firmware *fw;
- u32 dev_addr, version;
- int ret;
-
- fw_np = of_find_compatible_node(NULL, NULL,
- "raspberrypi,bcm2835-firmware");
- if (!fw_np)
- return 0;
-
- fw = rpi_firmware_get(fw_np);
- of_node_put(fw_np);
- if (!fw)
- return -ENODEV;
-
- /*
- * Make sure we don't trigger a firmware load unnecessarily.
- *
- * If something went wrong with PCI, this whole exercise would be
- * futile as VideoCore expects from us a configured PCI bus. Just take
- * the faulty version (likely ~0) and let xHCI's registration fail
- * further down the line.
- */
- pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version);
- if (version)
- goto exit;
-
- dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 |
- PCI_FUNC(pdev->devfn) << 12;
-
- ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET,
- &dev_addr, sizeof(dev_addr));
- if (ret)
- return ret;
-
- /* Wait for vl805 to startup */
- usleep_range(200, 1000);
-
- pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET,
- &version);
-exit:
- pci_info(pdev, "VL805 firmware version %08x\n", version);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805);
-
static const struct of_device_id rpi_firmware_of_match[] = {
{ .compatible = "raspberrypi,bcm2835-firmware", },
{},
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 060a8a03e6c4..32e1335c94ad 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -124,62 +124,31 @@ static void async_ctrl_callback(struct urb *urb)
static int get_registers(pegasus_t *pegasus, __u16 indx, __u16 size, void *data)
{
- u8 *buf;
- int ret;
-
- buf = kmalloc(size, GFP_NOIO);
- if (!buf)
- return -ENOMEM;
-
- ret = usb_control_msg(pegasus->usb, usb_rcvctrlpipe(pegasus->usb, 0),
- PEGASUS_REQ_GET_REGS, PEGASUS_REQT_READ, 0,
- indx, buf, size, 1000);
- if (ret < 0)
- netif_dbg(pegasus, drv, pegasus->net,
- "%s returned %d\n", __func__, ret);
- else if (ret <= size)
- memcpy(data, buf, ret);
- kfree(buf);
- return ret;
+ return usb_control_msg_recv(pegasus->usb, 0, PEGASUS_REQ_GET_REGS,
+ PEGASUS_REQT_READ, 0, indx, data, size,
+ 1000, GFP_NOIO);
}
static int set_registers(pegasus_t *pegasus, __u16 indx, __u16 size,
const void *data)
{
- u8 *buf;
- int ret;
-
- buf = kmemdup(data, size, GFP_NOIO);
- if (!buf)
- return -ENOMEM;
-
- ret = usb_control_msg(pegasus->usb, usb_sndctrlpipe(pegasus->usb, 0),
- PEGASUS_REQ_SET_REGS, PEGASUS_REQT_WRITE, 0,
- indx, buf, size, 100);
- if (ret < 0)
- netif_dbg(pegasus, drv, pegasus->net,
- "%s returned %d\n", __func__, ret);
- kfree(buf);
- return ret;
+ return usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REGS,
+ PEGASUS_REQT_WRITE, 0, indx, data, size,
+ 1000, GFP_NOIO);
}
+/*
+ * There is only one way to write to a single ADM8511 register and this is via
+ * specific control request. 'data' is ignored by the device, but it is here to
+ * not break the API.
+ */
static int set_register(pegasus_t *pegasus, __u16 indx, __u8 data)
{
- u8 *buf;
- int ret;
-
- buf = kmemdup(&data, 1, GFP_NOIO);
- if (!buf)
- return -ENOMEM;
+ void *buf = &data;
- ret = usb_control_msg(pegasus->usb, usb_sndctrlpipe(pegasus->usb, 0),
- PEGASUS_REQ_SET_REG, PEGASUS_REQT_WRITE, data,
- indx, buf, 1, 1000);
- if (ret < 0)
- netif_dbg(pegasus, drv, pegasus->net,
- "%s returned %d\n", __func__, ret);
- kfree(buf);
- return ret;
+ return usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REG,
+ PEGASUS_REQT_WRITE, data, indx, buf, 1,
+ 1000, GFP_NOIO);
}
static int update_eth_regs_async(pegasus_t *pegasus)
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index 9d079dc2a535..f020401adf04 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -152,36 +152,16 @@ static const char driver_name [] = "rtl8150";
*/
static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
{
- void *buf;
- int ret;
-
- buf = kmalloc(size, GFP_NOIO);
- if (!buf)
- return -ENOMEM;
-
- ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
- RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
- indx, 0, buf, size, 500);
- if (ret > 0 && ret <= size)
- memcpy(data, buf, ret);
- kfree(buf);
- return ret;
+ return usb_control_msg_recv(dev->udev, 0, RTL8150_REQ_GET_REGS,
+ RTL8150_REQT_READ, indx, 0, data, size,
+ 1000, GFP_NOIO);
}
static int set_registers(rtl8150_t * dev, u16 indx, u16 size, const void *data)
{
- void *buf;
- int ret;
-
- buf = kmemdup(data, size, GFP_NOIO);
- if (!buf)
- return -ENOMEM;
-
- ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
- RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
- indx, 0, buf, size, 500);
- kfree(buf);
- return ret;
+ return usb_control_msg_send(dev->udev, 0, RTL8150_REQ_SET_REGS,
+ RTL8150_REQT_WRITE, indx, 0, data, size,
+ 1000, GFP_NOIO);
}
static void async_set_reg_cb(struct urb *urb)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 85fa7d54f11f..bac63d04297f 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -28,8 +28,6 @@
#include <linux/string.h>
#include <linux/types.h>
-#include <soc/bcm2835/raspberrypi-firmware.h>
-
#include "../pci.h"
/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
@@ -931,24 +929,9 @@ static int brcm_pcie_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node, *msi_np;
struct pci_host_bridge *bridge;
- struct device_node *fw_np;
struct brcm_pcie *pcie;
int ret;
- /*
- * We have to wait for Raspberry Pi's firmware interface to be up as a
- * PCI fixup, rpi_firmware_init_vl805(), depends on it. This driver's
- * probe can race with the firmware interface's (see
- * drivers/firmware/raspberrypi.c) and potentially break the PCI fixup.
- */
- fw_np = of_find_compatible_node(NULL, NULL,
- "raspberrypi,bcm2835-firmware");
- if (fw_np && !rpi_firmware_get(fw_np)) {
- of_node_put(fw_np);
- return -EPROBE_DEFER;
- }
- of_node_put(fw_np);
-
bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
if (!bridge)
return -ENOMEM;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 2a589b6d6ed8..01f23e30bd8f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3673,63 +3673,6 @@ static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev)
DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C,
quirk_apple_poweroff_thunderbolt);
-
-/*
- * Apple: Wait for the Thunderbolt controller to reestablish PCI tunnels
- *
- * During suspend the Thunderbolt controller is reset and all PCI
- * tunnels are lost. The NHI driver will try to reestablish all tunnels
- * during resume. We have to manually wait for the NHI since there is
- * no parent child relationship between the NHI and the tunneled
- * bridges.
- */
-static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev)
-{
- struct pci_dev *sibling = NULL;
- struct pci_dev *nhi = NULL;
-
- if (!x86_apple_machine)
- return;
- if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)
- return;
-
- /*
- * Find the NHI and confirm that we are a bridge on the Thunderbolt
- * host controller and not on a Thunderbolt endpoint.
- */
- sibling = pci_get_slot(dev->bus, 0x0);
- if (sibling == dev)
- goto out; /* we are the downstream bridge to the NHI */
- if (!sibling || !sibling->subordinate)
- goto out;
- nhi = pci_get_slot(sibling->subordinate, 0x0);
- if (!nhi)
- goto out;
- if (nhi->vendor != PCI_VENDOR_ID_INTEL
- || (nhi->device != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE &&
- nhi->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C &&
- nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI &&
- nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI)
- || nhi->class != PCI_CLASS_SYSTEM_OTHER << 8)
- goto out;
- pci_info(dev, "quirk: waiting for Thunderbolt to reestablish PCI tunnels...\n");
- device_pm_wait_for_dev(&dev->dev, &nhi->dev);
-out:
- pci_dev_put(nhi);
- pci_dev_put(sibling);
-}
-DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_LIGHT_RIDGE,
- quirk_apple_wait_for_thunderbolt);
-DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C,
- quirk_apple_wait_for_thunderbolt);
-DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE,
- quirk_apple_wait_for_thunderbolt);
-DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE,
- quirk_apple_wait_for_thunderbolt);
#endif
/*
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index de9362c25c07..01b53f86004c 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -49,6 +49,17 @@ config PHY_XGENE
help
This option enables support for APM X-Gene SoC multi-purpose PHY.
+config USB_LGM_PHY
+ tristate "INTEL Lightning Mountain USB PHY Driver"
+ depends on USB_SUPPORT
+ select USB_PHY
+ select REGULATOR
+ select REGULATOR_FIXED_VOLTAGE
+ help
+ Enable this to support Intel DWC3 PHY USB phy. This driver provides
+ interface to interact with USB GEN-II and USB 3.x PHY that is part
+ of the Intel network SOC.
+
source "drivers/phy/allwinner/Kconfig"
source "drivers/phy/amlogic/Kconfig"
source "drivers/phy/broadcom/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index c27408e4daae..6eb2916773c5 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o
obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
+obj-$(CONFIG_USB_LGM_PHY) += phy-lgm-usb.o
obj-y += allwinner/ \
amlogic/ \
broadcom/ \
diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
index 14f45bc35cc5..47b029fbebbd 100644
--- a/drivers/phy/broadcom/phy-bcm-ns-usb3.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
@@ -13,6 +13,7 @@
#include <linux/bcma/bcma.h>
#include <linux/delay.h>
#include <linux/err.h>
+#include <linux/iopoll.h>
#include <linux/mdio.h>
#include <linux/module.h>
#include <linux/of_address.h>
@@ -258,29 +259,24 @@ static struct mdio_driver bcm_ns_usb3_mdio_driver = {
**************************************************/
static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
- u32 mask, u32 value, unsigned long timeout)
+ u32 mask, u32 value, int usec)
{
- unsigned long deadline = jiffies + timeout;
u32 val;
+ int ret;
- do {
- val = readl(addr);
- if ((val & mask) == value)
- return 0;
- cpu_relax();
- udelay(10);
- } while (!time_after_eq(jiffies, deadline));
+ ret = readl_poll_timeout_atomic(addr, val, ((val & mask) == value),
+ 10, usec);
+ if (ret)
+ dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
- dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
-
- return -EBUSY;
+ return ret;
}
static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
{
return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
0x0100, 0x0000,
- usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
+ BCM_NS_USB3_MII_MNG_TIMEOUT_US);
}
static int bcm_ns_usb3_platform_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
index 527625912b78..9630ac127366 100644
--- a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
+++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/irq.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
@@ -87,17 +88,11 @@ static const unsigned int usb_extcon_cable[] = {
static inline int pll_lock_stat(u32 usb_reg, int reg_mask,
struct ns2_phy_driver *driver)
{
- int retry = PLL_LOCK_RETRY;
u32 val;
- do {
- udelay(1);
- val = readl(driver->icfgdrd_regs + usb_reg);
- if (val & reg_mask)
- return 0;
- } while (--retry > 0);
-
- return -EBUSY;
+ return readl_poll_timeout_atomic(driver->icfgdrd_regs + usb_reg,
+ val, (val & reg_mask), 1,
+ PLL_LOCK_RETRY);
}
static int ns2_drd_phy_init(struct phy *phy)
diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c
index 77c025a0720c..c3e99ad17487 100644
--- a/drivers/phy/broadcom/phy-bcm-sr-usb.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c
@@ -5,6 +5,7 @@
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
@@ -109,19 +110,15 @@ static inline void bcm_usb_reg32_setbits(void __iomem *addr, uint32_t set)
static int bcm_usb_pll_lock_check(void __iomem *addr, u32 bit)
{
- int retry;
- u32 rd_data;
+ u32 data;
+ int ret;
- retry = PLL_LOCK_RETRY_COUNT;
- do {
- rd_data = readl(addr);
- if (rd_data & bit)
- return 0;
- udelay(1);
- } while (--retry > 0);
+ ret = readl_poll_timeout_atomic(addr, data, (data & bit), 1,
+ PLL_LOCK_RETRY_COUNT);
+ if (ret)
+ pr_err("%s: FAIL\n", __func__);
- pr_err("%s: FAIL\n", __func__);
- return -ETIMEDOUT;
+ return ret;
}
static int bcm_usb_ss_phy_init(struct bcm_usb_phy_cfg *phy_cfg)
diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
index 016514e4aa54..88e239adc3b8 100644
--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -97,7 +97,7 @@ struct cdns_reg_pairs {
struct cdns_salvo_data {
u8 reg_offset_shift;
- struct cdns_reg_pairs *init_sequence_val;
+ const struct cdns_reg_pairs *init_sequence_val;
u8 init_sequence_length;
};
@@ -126,7 +126,7 @@ static void cdns_salvo_write(struct cdns_salvo_phy *salvo_phy,
* Below bringup sequence pair are from Cadence PHY's User Guide
* and NXP platform tuning results.
*/
-static struct cdns_reg_pairs cdns_nxp_sequence_pair[] = {
+static const struct cdns_reg_pairs cdns_nxp_sequence_pair[] = {
{0x0830, PHY_PMA_CMN_CTRL1},
{0x0010, TB_ADDR_CMN_DIAG_HSCLK_SEL},
{0x00f0, TB_ADDR_CMN_PLL0_VCOCAL_INIT_TMR},
@@ -217,7 +217,7 @@ static int cdns_salvo_phy_init(struct phy *phy)
return ret;
for (i = 0; i < data->init_sequence_length; i++) {
- struct cdns_reg_pairs *reg_pair = data->init_sequence_val + i;
+ const struct cdns_reg_pairs *reg_pair = data->init_sequence_val + i;
cdns_salvo_write(salvo_phy, reg_pair->off, reg_pair->val);
}
@@ -251,7 +251,7 @@ static int cdns_salvo_phy_power_off(struct phy *phy)
return 0;
}
-static struct phy_ops cdns_salvo_phy_ops = {
+static const struct phy_ops cdns_salvo_phy_ops = {
.init = cdns_salvo_phy_init,
.power_on = cdns_salvo_phy_power_on,
.power_off = cdns_salvo_phy_power_off,
diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index faed652b73f7..453ef26fa1c7 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -172,10 +172,10 @@ struct cdns_sierra_data {
u32 pcie_ln_regs;
u32 usb_cmn_regs;
u32 usb_ln_regs;
- struct cdns_reg_pairs *pcie_cmn_vals;
- struct cdns_reg_pairs *pcie_ln_vals;
- struct cdns_reg_pairs *usb_cmn_vals;
- struct cdns_reg_pairs *usb_ln_vals;
+ const struct cdns_reg_pairs *pcie_cmn_vals;
+ const struct cdns_reg_pairs *pcie_ln_vals;
+ const struct cdns_reg_pairs *usb_cmn_vals;
+ const struct cdns_reg_pairs *usb_ln_vals;
};
struct cdns_regmap_cdb_context {
@@ -233,7 +233,7 @@ static int cdns_regmap_read(void *context, unsigned int reg, unsigned int *val)
.reg_read = cdns_regmap_read, \
}
-static struct regmap_config cdns_sierra_lane_cdb_config[] = {
+static const struct regmap_config cdns_sierra_lane_cdb_config[] = {
SIERRA_LANE_CDB_REGMAP_CONF("0"),
SIERRA_LANE_CDB_REGMAP_CONF("1"),
SIERRA_LANE_CDB_REGMAP_CONF("2"),
@@ -252,7 +252,7 @@ static struct regmap_config cdns_sierra_lane_cdb_config[] = {
SIERRA_LANE_CDB_REGMAP_CONF("15"),
};
-static struct regmap_config cdns_sierra_common_cdb_config = {
+static const struct regmap_config cdns_sierra_common_cdb_config = {
.name = "sierra_common_cdb",
.reg_stride = 1,
.fast_io = true,
@@ -260,7 +260,7 @@ static struct regmap_config cdns_sierra_common_cdb_config = {
.reg_read = cdns_regmap_read,
};
-static struct regmap_config cdns_sierra_phy_config_ctrl_config = {
+static const struct regmap_config cdns_sierra_phy_config_ctrl_config = {
.name = "sierra_phy_config_ctrl",
.reg_stride = 1,
.fast_io = true,
@@ -274,7 +274,7 @@ static int cdns_sierra_phy_init(struct phy *gphy)
struct cdns_sierra_phy *phy = dev_get_drvdata(gphy->dev.parent);
struct regmap *regmap;
int i, j;
- struct cdns_reg_pairs *cmn_vals, *ln_vals;
+ const struct cdns_reg_pairs *cmn_vals, *ln_vals;
u32 num_cmn_regs, num_ln_regs;
/* Initialise the PHY registers, unless auto configured */
@@ -654,7 +654,7 @@ static int cdns_sierra_phy_remove(struct platform_device *pdev)
}
/* refclk100MHz_32b_PCIe_cmn_pll_ext_ssc */
-static struct cdns_reg_pairs cdns_pcie_cmn_regs_ext_ssc[] = {
+static const struct cdns_reg_pairs cdns_pcie_cmn_regs_ext_ssc[] = {
{0x2106, SIERRA_CMN_PLLLC_LF_COEFF_MODE1_PREG},
{0x2106, SIERRA_CMN_PLLLC_LF_COEFF_MODE0_PREG},
{0x8A06, SIERRA_CMN_PLLLC_BWCAL_MODE1_PREG},
@@ -663,7 +663,7 @@ static struct cdns_reg_pairs cdns_pcie_cmn_regs_ext_ssc[] = {
};
/* refclk100MHz_32b_PCIe_ln_ext_ssc */
-static struct cdns_reg_pairs cdns_pcie_ln_regs_ext_ssc[] = {
+static const struct cdns_reg_pairs cdns_pcie_ln_regs_ext_ssc[] = {
{0x813E, SIERRA_CLKPATHCTRL_TMR_PREG},
{0x8047, SIERRA_RX_CREQ_FLTR_A_MODE3_PREG},
{0x808F, SIERRA_RX_CREQ_FLTR_A_MODE2_PREG},
@@ -674,7 +674,7 @@ static struct cdns_reg_pairs cdns_pcie_ln_regs_ext_ssc[] = {
};
/* refclk100MHz_20b_USB_cmn_pll_ext_ssc */
-static struct cdns_reg_pairs cdns_usb_cmn_regs_ext_ssc[] = {
+static const struct cdns_reg_pairs cdns_usb_cmn_regs_ext_ssc[] = {
{0x2085, SIERRA_CMN_PLLLC_LF_COEFF_MODE1_PREG},
{0x2085, SIERRA_CMN_PLLLC_LF_COEFF_MODE0_PREG},
{0x0000, SIERRA_CMN_PLLLC_BWCAL_MODE0_PREG},
@@ -682,7 +682,7 @@ static struct cdns_reg_pairs cdns_usb_cmn_regs_ext_ssc[] = {
};
/* refclk100MHz_20b_USB_ln_ext_ssc */
-static struct cdns_reg_pairs cdns_usb_ln_regs_ext_ssc[] = {
+static const struct cdns_reg_pairs cdns_usb_ln_regs_ext_ssc[] = {
{0xFE0A, SIERRA_DET_STANDEC_A_PREG},
{0x000F, SIERRA_DET_STANDEC_B_PREG},
{0x55A5, SIERRA_DET_STANDEC_C_PREG},
diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index 7116127358ee..f310e15d94cb 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -25,11 +25,14 @@
#define REF_CLK_19_2MHz 19200000
#define REF_CLK_25MHz 25000000
-#define DEFAULT_NUM_LANES 4
#define MAX_NUM_LANES 4
#define DEFAULT_MAX_BIT_RATE 8100 /* in Mbps */
+#define NUM_SSC_MODE 3
+#define NUM_PHY_TYPE 6
+
#define POLL_TIMEOUT_US 5000
+#define PLL_LOCK_TIMEOUT 100000
#define TORRENT_COMMON_CDB_OFFSET 0x0
@@ -79,6 +82,8 @@
#define CMN_PLLSM0_PLLLOCK_TMR 0x002CU
#define CMN_PLLSM1_PLLPRE_TMR 0x0032U
#define CMN_PLLSM1_PLLLOCK_TMR 0x0034U
+#define CMN_CDIAG_CDB_PWRI_OVRD 0x0041U
+#define CMN_CDIAG_XCVRC_PWRI_OVRD 0x0047U
#define CMN_BGCAL_INIT_TMR 0x0064U
#define CMN_BGCAL_ITER_TMR 0x0065U
#define CMN_IBCAL_INIT_TMR 0x0074U
@@ -99,6 +104,14 @@
#define CMN_PLL0_LOCK_REFCNT_START 0x009CU
#define CMN_PLL0_LOCK_PLLCNT_START 0x009EU
#define CMN_PLL0_LOCK_PLLCNT_THR 0x009FU
+#define CMN_PLL0_INTDIV_M1 0x00A0U
+#define CMN_PLL0_FRACDIVH_M1 0x00A2U
+#define CMN_PLL0_HIGH_THR_M1 0x00A3U
+#define CMN_PLL0_DSM_DIAG_M1 0x00A4U
+#define CMN_PLL0_SS_CTRL1_M1 0x00A8U
+#define CMN_PLL0_SS_CTRL2_M1 0x00A9U
+#define CMN_PLL0_SS_CTRL3_M1 0x00AAU
+#define CMN_PLL0_SS_CTRL4_M1 0x00ABU
#define CMN_PLL1_VCOCAL_TCTRL 0x00C2U
#define CMN_PLL1_VCOCAL_INIT_TMR 0x00C4U
#define CMN_PLL1_VCOCAL_ITER_TMR 0x00C5U
@@ -116,8 +129,10 @@
#define CMN_PLL1_LOCK_REFCNT_START 0x00DCU
#define CMN_PLL1_LOCK_PLLCNT_START 0x00DEU
#define CMN_PLL1_LOCK_PLLCNT_THR 0x00DFU
+#define CMN_TXPUCAL_TUNE 0x0103U
#define CMN_TXPUCAL_INIT_TMR 0x0104U
#define CMN_TXPUCAL_ITER_TMR 0x0105U
+#define CMN_TXPDCAL_TUNE 0x010BU
#define CMN_TXPDCAL_INIT_TMR 0x010CU
#define CMN_TXPDCAL_ITER_TMR 0x010DU
#define CMN_RXCAL_INIT_TMR 0x0114U
@@ -131,24 +146,31 @@
#define CMN_PDIAG_PLL0_CP_PADJ_M0 0x01A4U
#define CMN_PDIAG_PLL0_CP_IADJ_M0 0x01A5U
#define CMN_PDIAG_PLL0_FILT_PADJ_M0 0x01A6U
+#define CMN_PDIAG_PLL0_CTRL_M1 0x01B0U
+#define CMN_PDIAG_PLL0_CLK_SEL_M1 0x01B1U
#define CMN_PDIAG_PLL0_CP_PADJ_M1 0x01B4U
#define CMN_PDIAG_PLL0_CP_IADJ_M1 0x01B5U
+#define CMN_PDIAG_PLL0_FILT_PADJ_M1 0x01B6U
#define CMN_PDIAG_PLL1_CTRL_M0 0x01C0U
#define CMN_PDIAG_PLL1_CLK_SEL_M0 0x01C1U
#define CMN_PDIAG_PLL1_CP_PADJ_M0 0x01C4U
#define CMN_PDIAG_PLL1_CP_IADJ_M0 0x01C5U
#define CMN_PDIAG_PLL1_FILT_PADJ_M0 0x01C6U
+#define CMN_DIAG_BIAS_OVRD1 0x01E1U
/* PMA TX Lane registers */
#define TX_TXCC_CTRL 0x0040U
#define TX_TXCC_CPOST_MULT_00 0x004CU
+#define TX_TXCC_CPOST_MULT_01 0x004DU
#define TX_TXCC_MGNFS_MULT_000 0x0050U
#define DRV_DIAG_TX_DRV 0x00C6U
#define XCVR_DIAG_PLLDRC_CTRL 0x00E5U
#define XCVR_DIAG_HSCLK_SEL 0x00E6U
#define XCVR_DIAG_HSCLK_DIV 0x00E7U
#define XCVR_DIAG_BIDI_CTRL 0x00EAU
+#define XCVR_DIAG_PSC_OVRD 0x00EBU
#define TX_PSC_A0 0x0100U
+#define TX_PSC_A1 0x0101U
#define TX_PSC_A2 0x0102U
#define TX_PSC_A3 0x0103U
#define TX_RCVDET_ST_TMR 0x0123U
@@ -157,23 +179,49 @@
/* PMA RX Lane registers */
#define RX_PSC_A0 0x0000U
+#define RX_PSC_A1 0x0001U
#define RX_PSC_A2 0x0002U
#define RX_PSC_A3 0x0003U
#define RX_PSC_CAL 0x0006U
+#define RX_CDRLF_CNFG 0x0080U
+#define RX_CDRLF_CNFG3 0x0082U
+#define RX_SIGDET_HL_FILT_TMR 0x0090U
#define RX_REE_GCSM1_CTRL 0x0108U
+#define RX_REE_GCSM1_EQENM_PH1 0x0109U
+#define RX_REE_GCSM1_EQENM_PH2 0x010AU
#define RX_REE_GCSM2_CTRL 0x0110U
#define RX_REE_PERGCSM_CTRL 0x0118U
+#define RX_REE_ATTEN_THR 0x0149U
+#define RX_REE_TAP1_CLIP 0x0171U
+#define RX_REE_TAP2TON_CLIP 0x0172U
+#define RX_REE_SMGM_CTRL1 0x0177U
+#define RX_REE_SMGM_CTRL2 0x0178U
+#define RX_DIAG_DFE_CTRL 0x01E0U
+#define RX_DIAG_DFE_AMP_TUNE_2 0x01E2U
+#define RX_DIAG_DFE_AMP_TUNE_3 0x01E3U
+#define RX_DIAG_NQST_CTRL 0x01E5U
+#define RX_DIAG_SIGDET_TUNE 0x01E8U
+#define RX_DIAG_PI_RATE 0x01F4U
+#define RX_DIAG_PI_CAP 0x01F5U
+#define RX_DIAG_ACYA 0x01FFU
/* PHY PCS common registers */
#define PHY_PLL_CFG 0x000EU
+#define PHY_PIPE_USB3_GEN2_PRE_CFG0 0x0020U
+#define PHY_PIPE_USB3_GEN2_POST_CFG0 0x0022U
+#define PHY_PIPE_USB3_GEN2_POST_CFG1 0x0023U
/* PHY PMA common registers */
+#define PHY_PMA_CMN_CTRL1 0x0000U
#define PHY_PMA_CMN_CTRL2 0x0001U
#define PHY_PMA_PLL_RAW_CTRL 0x0003U
static const struct reg_field phy_pll_cfg =
REG_FIELD(PHY_PLL_CFG, 0, 1);
+static const struct reg_field phy_pma_cmn_ctrl_1 =
+ REG_FIELD(PHY_PMA_CMN_CTRL1, 0, 0);
+
static const struct reg_field phy_pma_cmn_ctrl_2 =
REG_FIELD(PHY_PMA_CMN_CTRL2, 0, 7);
@@ -183,14 +231,28 @@ static const struct reg_field phy_pma_pll_raw_ctrl =
static const struct reg_field phy_reset_ctrl =
REG_FIELD(PHY_RESET, 8, 8);
-static const struct of_device_id cdns_torrent_phy_of_match[];
+enum cdns_torrent_phy_type {
+ TYPE_NONE,
+ TYPE_DP,
+ TYPE_PCIE,
+ TYPE_SGMII,
+ TYPE_QSGMII,
+ TYPE_USB,
+};
+
+enum cdns_torrent_ssc_mode {
+ NO_SSC,
+ EXTERNAL_SSC,
+ INTERNAL_SSC
+};
struct cdns_torrent_inst {
struct phy *phy;
u32 mlane;
- u32 phy_type;
+ enum cdns_torrent_phy_type phy_type;
u32 num_lanes;
struct reset_control *lnk_rst;
+ enum cdns_torrent_ssc_mode ssc_mode;
};
struct cdns_torrent_phy {
@@ -198,11 +260,13 @@ struct cdns_torrent_phy {
void __iomem *sd_base; /* SD0801 registers base */
u32 max_bit_rate; /* Maximum link bit rate to use (in Mbps) */
struct reset_control *phy_rst;
+ struct reset_control *apb_rst;
struct device *dev;
struct clk *clk;
unsigned long ref_clk_rate;
struct cdns_torrent_inst phys[MAX_NUM_LANES];
int nsubnodes;
+ const struct cdns_torrent_data *init_data;
struct regmap *regmap;
struct regmap *regmap_common_cdb;
struct regmap *regmap_phy_pcs_common_cdb;
@@ -211,6 +275,7 @@ struct cdns_torrent_phy {
struct regmap *regmap_rx_lane_cdb[MAX_NUM_LANES];
struct regmap *regmap_dptx_phy_reg;
struct regmap_field *phy_pll_cfg;
+ struct regmap_field *phy_pma_cmn_ctrl_1;
struct regmap_field *phy_pma_cmn_ctrl_2;
struct regmap_field *phy_pma_pll_raw_ctrl;
struct regmap_field *phy_reset_ctrl;
@@ -223,8 +288,8 @@ enum phy_powerstate {
POWERSTATE_A3 = 3,
};
+static int cdns_torrent_phy_init(struct phy *phy);
static int cdns_torrent_dp_init(struct phy *phy);
-static int cdns_torrent_dp_exit(struct phy *phy);
static int cdns_torrent_dp_run(struct cdns_torrent_phy *cdns_phy,
u32 num_lanes);
static
@@ -254,17 +319,38 @@ static int cdns_torrent_phy_on(struct phy *phy);
static int cdns_torrent_phy_off(struct phy *phy);
static const struct phy_ops cdns_torrent_phy_ops = {
- .init = cdns_torrent_dp_init,
- .exit = cdns_torrent_dp_exit,
+ .init = cdns_torrent_phy_init,
.configure = cdns_torrent_dp_configure,
.power_on = cdns_torrent_phy_on,
.power_off = cdns_torrent_phy_off,
.owner = THIS_MODULE,
};
+struct cdns_reg_pairs {
+ u32 val;
+ u32 off;
+};
+
+struct cdns_torrent_vals {
+ struct cdns_reg_pairs *reg_pairs;
+ u32 num_regs;
+};
+
struct cdns_torrent_data {
- u8 block_offset_shift;
- u8 reg_offset_shift;
+ u8 block_offset_shift;
+ u8 reg_offset_shift;
+ struct cdns_torrent_vals *link_cmn_vals[NUM_PHY_TYPE][NUM_PHY_TYPE]
+ [NUM_SSC_MODE];
+ struct cdns_torrent_vals *xcvr_diag_vals[NUM_PHY_TYPE][NUM_PHY_TYPE]
+ [NUM_SSC_MODE];
+ struct cdns_torrent_vals *pcs_cmn_vals[NUM_PHY_TYPE][NUM_PHY_TYPE]
+ [NUM_SSC_MODE];
+ struct cdns_torrent_vals *cmn_vals[NUM_PHY_TYPE][NUM_PHY_TYPE]
+ [NUM_SSC_MODE];
+ struct cdns_torrent_vals *tx_ln_vals[NUM_PHY_TYPE][NUM_PHY_TYPE]
+ [NUM_SSC_MODE];
+ struct cdns_torrent_vals *rx_ln_vals[NUM_PHY_TYPE][NUM_PHY_TYPE]
+ [NUM_SSC_MODE];
};
struct cdns_regmap_cdb_context {
@@ -331,21 +417,21 @@ static int cdns_regmap_dptx_read(void *context, unsigned int reg,
.reg_read = cdns_regmap_read, \
}
-static struct regmap_config cdns_torrent_tx_lane_cdb_config[] = {
+static const struct regmap_config cdns_torrent_tx_lane_cdb_config[] = {
TORRENT_TX_LANE_CDB_REGMAP_CONF("0"),
TORRENT_TX_LANE_CDB_REGMAP_CONF("1"),
TORRENT_TX_LANE_CDB_REGMAP_CONF("2"),
TORRENT_TX_LANE_CDB_REGMAP_CONF("3"),
};
-static struct regmap_config cdns_torrent_rx_lane_cdb_config[] = {
+static const struct regmap_config cdns_torrent_rx_lane_cdb_config[] = {
TORRENT_RX_LANE_CDB_REGMAP_CONF("0"),
TORRENT_RX_LANE_CDB_REGMAP_CONF("1"),
TORRENT_RX_LANE_CDB_REGMAP_CONF("2"),
TORRENT_RX_LANE_CDB_REGMAP_CONF("3"),
};
-static struct regmap_config cdns_torrent_common_cdb_config = {
+static const struct regmap_config cdns_torrent_common_cdb_config = {
.name = "torrent_common_cdb",
.reg_stride = 1,
.fast_io = true,
@@ -353,7 +439,7 @@ static struct regmap_config cdns_torrent_common_cdb_config = {
.reg_read = cdns_regmap_read,
};
-static struct regmap_config cdns_torrent_phy_pcs_cmn_cdb_config = {
+static const struct regmap_config cdns_torrent_phy_pcs_cmn_cdb_config = {
.name = "torrent_phy_pcs_cmn_cdb",
.reg_stride = 1,
.fast_io = true,
@@ -361,7 +447,7 @@ static struct regmap_config cdns_torrent_phy_pcs_cmn_cdb_config = {
.reg_read = cdns_regmap_read,
};
-static struct regmap_config cdns_torrent_phy_pma_cmn_cdb_config = {
+static const struct regmap_config cdns_torrent_phy_pma_cmn_cdb_config = {
.name = "torrent_phy_pma_cmn_cdb",
.reg_stride = 1,
.fast_io = true,
@@ -369,7 +455,7 @@ static struct regmap_config cdns_torrent_phy_pma_cmn_cdb_config = {
.reg_read = cdns_regmap_read,
};
-static struct regmap_config cdns_torrent_dptx_phy_config = {
+static const struct regmap_config cdns_torrent_dptx_phy_config = {
.name = "torrent_dptx_phy",
.reg_stride = 1,
.fast_io = true,
@@ -848,19 +934,6 @@ static int cdns_torrent_dp_init(struct phy *phy)
struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent);
struct regmap *regmap = cdns_phy->regmap_dptx_phy_reg;
- ret = clk_prepare_enable(cdns_phy->clk);
- if (ret) {
- dev_err(cdns_phy->dev, "Failed to prepare ref clock\n");
- return ret;
- }
-
- cdns_phy->ref_clk_rate = clk_get_rate(cdns_phy->clk);
- if (!(cdns_phy->ref_clk_rate)) {
- dev_err(cdns_phy->dev, "Failed to get ref clock rate\n");
- clk_disable_unprepare(cdns_phy->clk);
- return -EINVAL;
- }
-
switch (cdns_phy->ref_clk_rate) {
case REF_CLK_19_2MHz:
case REF_CLK_25MHz:
@@ -920,14 +993,6 @@ static int cdns_torrent_dp_init(struct phy *phy)
return ret;
}
-static int cdns_torrent_dp_exit(struct phy *phy)
-{
- struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent);
-
- clk_disable_unprepare(cdns_phy->clk);
- return 0;
-}
-
static
int cdns_torrent_dp_wait_pma_cmn_ready(struct cdns_torrent_phy *cdns_phy)
{
@@ -1543,15 +1608,34 @@ static int cdns_torrent_phy_on(struct phy *phy)
{
struct cdns_torrent_inst *inst = phy_get_drvdata(phy);
struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent);
+ u32 read_val;
int ret;
- /* Take the PHY out of reset */
- ret = reset_control_deassert(cdns_phy->phy_rst);
- if (ret)
+ if (cdns_phy->nsubnodes == 1) {
+ /* Take the PHY lane group out of reset */
+ reset_control_deassert(inst->lnk_rst);
+
+ /* Take the PHY out of reset */
+ ret = reset_control_deassert(cdns_phy->phy_rst);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * Wait for cmn_ready assertion
+ * PHY_PMA_CMN_CTRL1[0] == 1
+ */
+ ret = regmap_field_read_poll_timeout(cdns_phy->phy_pma_cmn_ctrl_1,
+ read_val, read_val, 1000,
+ PLL_LOCK_TIMEOUT);
+ if (ret) {
+ dev_err(cdns_phy->dev, "Timeout waiting for CMN ready\n");
return ret;
+ }
+
+ mdelay(10);
- /* Take the PHY lane group out of reset */
- return reset_control_deassert(inst->lnk_rst);
+ return 0;
}
static int cdns_torrent_phy_off(struct phy *phy)
@@ -1560,6 +1644,9 @@ static int cdns_torrent_phy_off(struct phy *phy)
struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent);
int ret;
+ if (cdns_phy->nsubnodes != 1)
+ return 0;
+
ret = reset_control_assert(cdns_phy->phy_rst);
if (ret)
return ret;
@@ -1585,7 +1672,24 @@ static struct regmap *cdns_regmap_init(struct device *dev, void __iomem *base,
return devm_regmap_init(dev, NULL, ctx, config);
}
-static int cdns_regfield_init(struct cdns_torrent_phy *cdns_phy)
+static int cdns_torrent_dp_regfield_init(struct cdns_torrent_phy *cdns_phy)
+{
+ struct device *dev = cdns_phy->dev;
+ struct regmap_field *field;
+ struct regmap *regmap;
+
+ regmap = cdns_phy->regmap_dptx_phy_reg;
+ field = devm_regmap_field_alloc(dev, regmap, phy_reset_ctrl);
+ if (IS_ERR(field)) {
+ dev_err(dev, "PHY_RESET reg field init failed\n");
+ return PTR_ERR(field);
+ }
+ cdns_phy->phy_reset_ctrl = field;
+
+ return 0;
+}
+
+static int cdns_torrent_regfield_init(struct cdns_torrent_phy *cdns_phy)
{
struct device *dev = cdns_phy->dev;
struct regmap_field *field;
@@ -1600,6 +1704,14 @@ static int cdns_regfield_init(struct cdns_torrent_phy *cdns_phy)
cdns_phy->phy_pll_cfg = field;
regmap = cdns_phy->regmap_phy_pma_common_cdb;
+ field = devm_regmap_field_alloc(dev, regmap, phy_pma_cmn_ctrl_1);
+ if (IS_ERR(field)) {
+ dev_err(dev, "PHY_PMA_CMN_CTRL1 reg field init failed\n");
+ return PTR_ERR(field);
+ }
+ cdns_phy->phy_pma_cmn_ctrl_1 = field;
+
+ regmap = cdns_phy->regmap_phy_pma_common_cdb;
field = devm_regmap_field_alloc(dev, regmap, phy_pma_cmn_ctrl_2);
if (IS_ERR(field)) {
dev_err(dev, "PHY_PMA_CMN_CTRL2 reg field init failed\n");
@@ -1615,28 +1727,44 @@ static int cdns_regfield_init(struct cdns_torrent_phy *cdns_phy)
}
cdns_phy->phy_pma_pll_raw_ctrl = field;
- regmap = cdns_phy->regmap_dptx_phy_reg;
- field = devm_regmap_field_alloc(dev, regmap, phy_reset_ctrl);
- if (IS_ERR(field)) {
- dev_err(dev, "PHY_RESET reg field init failed\n");
- return PTR_ERR(field);
+ return 0;
+}
+
+static int cdns_torrent_dp_regmap_init(struct cdns_torrent_phy *cdns_phy)
+{
+ void __iomem *base = cdns_phy->base;
+ struct device *dev = cdns_phy->dev;
+ struct regmap *regmap;
+ u8 reg_offset_shift;
+ u32 block_offset;
+
+ reg_offset_shift = cdns_phy->init_data->reg_offset_shift;
+
+ block_offset = TORRENT_DPTX_PHY_OFFSET;
+ regmap = cdns_regmap_init(dev, base, block_offset,
+ reg_offset_shift,
+ &cdns_torrent_dptx_phy_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "Failed to init DPTX PHY regmap\n");
+ return PTR_ERR(regmap);
}
- cdns_phy->phy_reset_ctrl = field;
+ cdns_phy->regmap_dptx_phy_reg = regmap;
return 0;
}
-static int cdns_regmap_init_torrent_dp(struct cdns_torrent_phy *cdns_phy,
- void __iomem *sd_base,
- void __iomem *base,
- u8 block_offset_shift,
- u8 reg_offset_shift)
+static int cdns_torrent_regmap_init(struct cdns_torrent_phy *cdns_phy)
{
+ void __iomem *sd_base = cdns_phy->sd_base;
+ u8 block_offset_shift, reg_offset_shift;
struct device *dev = cdns_phy->dev;
struct regmap *regmap;
u32 block_offset;
int i;
+ block_offset_shift = cdns_phy->init_data->block_offset_shift;
+ reg_offset_shift = cdns_phy->init_data->reg_offset_shift;
+
for (i = 0; i < MAX_NUM_LANES; i++) {
block_offset = TORRENT_TX_LANE_CDB_OFFSET(i, block_offset_shift,
reg_offset_shift);
@@ -1691,43 +1819,282 @@ static int cdns_regmap_init_torrent_dp(struct cdns_torrent_phy *cdns_phy,
}
cdns_phy->regmap_phy_pma_common_cdb = regmap;
- block_offset = TORRENT_DPTX_PHY_OFFSET;
- regmap = cdns_regmap_init(dev, base, block_offset,
- reg_offset_shift,
- &cdns_torrent_dptx_phy_config);
- if (IS_ERR(regmap)) {
- dev_err(dev, "Failed to init DPTX PHY regmap\n");
- return PTR_ERR(regmap);
+ return 0;
+}
+
+static int cdns_torrent_phy_init(struct phy *phy)
+{
+ struct cdns_torrent_phy *cdns_phy = dev_get_drvdata(phy->dev.parent);
+ const struct cdns_torrent_data *init_data = cdns_phy->init_data;
+ struct cdns_torrent_vals *cmn_vals, *tx_ln_vals, *rx_ln_vals;
+ struct cdns_torrent_vals *link_cmn_vals, *xcvr_diag_vals;
+ struct cdns_torrent_inst *inst = phy_get_drvdata(phy);
+ enum cdns_torrent_phy_type phy_type = inst->phy_type;
+ enum cdns_torrent_ssc_mode ssc = inst->ssc_mode;
+ struct cdns_torrent_vals *pcs_cmn_vals;
+ struct cdns_reg_pairs *reg_pairs;
+ struct regmap *regmap;
+ u32 num_regs;
+ int i, j;
+
+ if (cdns_phy->nsubnodes > 1)
+ return 0;
+
+ if (phy_type == TYPE_DP)
+ return cdns_torrent_dp_init(phy);
+
+ /**
+ * Spread spectrum generation is not required or supported
+ * for SGMII/QSGMII
+ */
+ if (phy_type == TYPE_SGMII || phy_type == TYPE_QSGMII)
+ ssc = NO_SSC;
+
+ /* PHY configuration specific registers for single link */
+ link_cmn_vals = init_data->link_cmn_vals[phy_type][TYPE_NONE][ssc];
+ if (link_cmn_vals) {
+ reg_pairs = link_cmn_vals->reg_pairs;
+ num_regs = link_cmn_vals->num_regs;
+ regmap = cdns_phy->regmap_common_cdb;
+
+ /**
+ * First array value in link_cmn_vals must be of
+ * PHY_PLL_CFG register
+ */
+ regmap_field_write(cdns_phy->phy_pll_cfg, reg_pairs[0].val);
+
+ for (i = 1; i < num_regs; i++)
+ regmap_write(regmap, reg_pairs[i].off,
+ reg_pairs[i].val);
+ }
+
+ xcvr_diag_vals = init_data->xcvr_diag_vals[phy_type][TYPE_NONE][ssc];
+ if (xcvr_diag_vals) {
+ reg_pairs = xcvr_diag_vals->reg_pairs;
+ num_regs = xcvr_diag_vals->num_regs;
+ for (i = 0; i < inst->num_lanes; i++) {
+ regmap = cdns_phy->regmap_tx_lane_cdb[i + inst->mlane];
+ for (j = 0; j < num_regs; j++)
+ regmap_write(regmap, reg_pairs[j].off,
+ reg_pairs[j].val);
+ }
+ }
+
+ /* PHY PCS common registers configurations */
+ pcs_cmn_vals = init_data->pcs_cmn_vals[phy_type][TYPE_NONE][ssc];
+ if (pcs_cmn_vals) {
+ reg_pairs = pcs_cmn_vals->reg_pairs;
+ num_regs = pcs_cmn_vals->num_regs;
+ regmap = cdns_phy->regmap_phy_pcs_common_cdb;
+ for (i = 0; i < num_regs; i++)
+ regmap_write(regmap, reg_pairs[i].off,
+ reg_pairs[i].val);
+ }
+
+ /* PMA common registers configurations */
+ cmn_vals = init_data->cmn_vals[phy_type][TYPE_NONE][ssc];
+ if (cmn_vals) {
+ reg_pairs = cmn_vals->reg_pairs;
+ num_regs = cmn_vals->num_regs;
+ regmap = cdns_phy->regmap_common_cdb;
+ for (i = 0; i < num_regs; i++)
+ regmap_write(regmap, reg_pairs[i].off,
+ reg_pairs[i].val);
+ }
+
+ /* PMA TX lane registers configurations */
+ tx_ln_vals = init_data->tx_ln_vals[phy_type][TYPE_NONE][ssc];
+ if (tx_ln_vals) {
+ reg_pairs = tx_ln_vals->reg_pairs;
+ num_regs = tx_ln_vals->num_regs;
+ for (i = 0; i < inst->num_lanes; i++) {
+ regmap = cdns_phy->regmap_tx_lane_cdb[i + inst->mlane];
+ for (j = 0; j < num_regs; j++)
+ regmap_write(regmap, reg_pairs[j].off,
+ reg_pairs[j].val);
+ }
+ }
+
+ /* PMA RX lane registers configurations */
+ rx_ln_vals = init_data->rx_ln_vals[phy_type][TYPE_NONE][ssc];
+ if (rx_ln_vals) {
+ reg_pairs = rx_ln_vals->reg_pairs;
+ num_regs = rx_ln_vals->num_regs;
+ for (i = 0; i < inst->num_lanes; i++) {
+ regmap = cdns_phy->regmap_rx_lane_cdb[i + inst->mlane];
+ for (j = 0; j < num_regs; j++)
+ regmap_write(regmap, reg_pairs[j].off,
+ reg_pairs[j].val);
+ }
}
- cdns_phy->regmap_dptx_phy_reg = regmap;
+
+ return 0;
+}
+
+static
+int cdns_torrent_phy_configure_multilink(struct cdns_torrent_phy *cdns_phy)
+{
+ const struct cdns_torrent_data *init_data = cdns_phy->init_data;
+ struct cdns_torrent_vals *cmn_vals, *tx_ln_vals, *rx_ln_vals;
+ struct cdns_torrent_vals *link_cmn_vals, *xcvr_diag_vals;
+ enum cdns_torrent_phy_type phy_t1, phy_t2, tmp_phy_type;
+ struct cdns_torrent_vals *pcs_cmn_vals;
+ int i, j, node, mlane, num_lanes, ret;
+ struct cdns_reg_pairs *reg_pairs;
+ enum cdns_torrent_ssc_mode ssc;
+ struct regmap *regmap;
+ u32 num_regs;
+
+ /* Maximum 2 links (subnodes) are supported */
+ if (cdns_phy->nsubnodes != 2)
+ return -EINVAL;
+
+ phy_t1 = cdns_phy->phys[0].phy_type;
+ phy_t2 = cdns_phy->phys[1].phy_type;
+
+ /**
+ * First configure the PHY for first link with phy_t1. Get the array
+ * values as [phy_t1][phy_t2][ssc].
+ */
+ for (node = 0; node < cdns_phy->nsubnodes; node++) {
+ if (node == 1) {
+ /**
+ * If first link with phy_t1 is configured, then
+ * configure the PHY for second link with phy_t2.
+ * Get the array values as [phy_t2][phy_t1][ssc].
+ */
+ tmp_phy_type = phy_t1;
+ phy_t1 = phy_t2;
+ phy_t2 = tmp_phy_type;
+ }
+
+ mlane = cdns_phy->phys[node].mlane;
+ ssc = cdns_phy->phys[node].ssc_mode;
+ num_lanes = cdns_phy->phys[node].num_lanes;
+
+ /**
+ * PHY configuration specific registers:
+ * link_cmn_vals depend on combination of PHY types being
+ * configured and are common for both PHY types, so array
+ * values should be same for [phy_t1][phy_t2][ssc] and
+ * [phy_t2][phy_t1][ssc].
+ * xcvr_diag_vals also depend on combination of PHY types
+ * being configured, but these can be different for particular
+ * PHY type and are per lane.
+ */
+ link_cmn_vals = init_data->link_cmn_vals[phy_t1][phy_t2][ssc];
+ if (link_cmn_vals) {
+ reg_pairs = link_cmn_vals->reg_pairs;
+ num_regs = link_cmn_vals->num_regs;
+ regmap = cdns_phy->regmap_common_cdb;
+
+ /**
+ * First array value in link_cmn_vals must be of
+ * PHY_PLL_CFG register
+ */
+ regmap_field_write(cdns_phy->phy_pll_cfg,
+ reg_pairs[0].val);
+
+ for (i = 1; i < num_regs; i++)
+ regmap_write(regmap, reg_pairs[i].off,
+ reg_pairs[i].val);
+ }
+
+ xcvr_diag_vals = init_data->xcvr_diag_vals[phy_t1][phy_t2][ssc];
+ if (xcvr_diag_vals) {
+ reg_pairs = xcvr_diag_vals->reg_pairs;
+ num_regs = xcvr_diag_vals->num_regs;
+ for (i = 0; i < num_lanes; i++) {
+ regmap = cdns_phy->regmap_tx_lane_cdb[i + mlane];
+ for (j = 0; j < num_regs; j++)
+ regmap_write(regmap, reg_pairs[j].off,
+ reg_pairs[j].val);
+ }
+ }
+
+ /* PHY PCS common registers configurations */
+ pcs_cmn_vals = init_data->pcs_cmn_vals[phy_t1][phy_t2][ssc];
+ if (pcs_cmn_vals) {
+ reg_pairs = pcs_cmn_vals->reg_pairs;
+ num_regs = pcs_cmn_vals->num_regs;
+ regmap = cdns_phy->regmap_phy_pcs_common_cdb;
+ for (i = 0; i < num_regs; i++)
+ regmap_write(regmap, reg_pairs[i].off,
+ reg_pairs[i].val);
+ }
+
+ /* PMA common registers configurations */
+ cmn_vals = init_data->cmn_vals[phy_t1][phy_t2][ssc];
+ if (cmn_vals) {
+ reg_pairs = cmn_vals->reg_pairs;
+ num_regs = cmn_vals->num_regs;
+ regmap = cdns_phy->regmap_common_cdb;
+ for (i = 0; i < num_regs; i++)
+ regmap_write(regmap, reg_pairs[i].off,
+ reg_pairs[i].val);
+ }
+
+ /* PMA TX lane registers configurations */
+ tx_ln_vals = init_data->tx_ln_vals[phy_t1][phy_t2][ssc];
+ if (tx_ln_vals) {
+ reg_pairs = tx_ln_vals->reg_pairs;
+ num_regs = tx_ln_vals->num_regs;
+ for (i = 0; i < num_lanes; i++) {
+ regmap = cdns_phy->regmap_tx_lane_cdb[i + mlane];
+ for (j = 0; j < num_regs; j++)
+ regmap_write(regmap, reg_pairs[j].off,
+ reg_pairs[j].val);
+ }
+ }
+
+ /* PMA RX lane registers configurations */
+ rx_ln_vals = init_data->rx_ln_vals[phy_t1][phy_t2][ssc];
+ if (rx_ln_vals) {
+ reg_pairs = rx_ln_vals->reg_pairs;
+ num_regs = rx_ln_vals->num_regs;
+ for (i = 0; i < num_lanes; i++) {
+ regmap = cdns_phy->regmap_rx_lane_cdb[i + mlane];
+ for (j = 0; j < num_regs; j++)
+ regmap_write(regmap, reg_pairs[j].off,
+ reg_pairs[j].val);
+ }
+ }
+
+ reset_control_deassert(cdns_phy->phys[node].lnk_rst);
+ }
+
+ /* Take the PHY out of reset */
+ ret = reset_control_deassert(cdns_phy->phy_rst);
+ if (ret)
+ return ret;
return 0;
}
static int cdns_torrent_phy_probe(struct platform_device *pdev)
{
- struct resource *regs;
struct cdns_torrent_phy *cdns_phy;
struct device *dev = &pdev->dev;
struct phy_provider *phy_provider;
- const struct of_device_id *match;
- struct cdns_torrent_data *data;
+ const struct cdns_torrent_data *data;
struct device_node *child;
int ret, subnodes, node = 0, i;
+ u32 total_num_lanes = 0;
+ u8 init_dp_regmap = 0;
+ u32 phy_type;
/* Get init data for this PHY */
- match = of_match_device(cdns_torrent_phy_of_match, dev);
- if (!match)
+ data = of_device_get_match_data(dev);
+ if (!data)
return -EINVAL;
- data = (struct cdns_torrent_data *)match->data;
-
cdns_phy = devm_kzalloc(dev, sizeof(*cdns_phy), GFP_KERNEL);
if (!cdns_phy)
return -ENOMEM;
dev_set_drvdata(dev, cdns_phy);
cdns_phy->dev = dev;
+ cdns_phy->init_data = data;
cdns_phy->phy_rst = devm_reset_control_get_exclusive_by_index(dev, 0);
if (IS_ERR(cdns_phy->phy_rst)) {
@@ -1736,14 +2103,20 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev)
return PTR_ERR(cdns_phy->phy_rst);
}
+ cdns_phy->apb_rst = devm_reset_control_get_optional(dev, "torrent_apb");
+ if (IS_ERR(cdns_phy->apb_rst)) {
+ dev_err(dev, "%s: failed to get apb reset\n",
+ dev->of_node->full_name);
+ return PTR_ERR(cdns_phy->apb_rst);
+ }
+
cdns_phy->clk = devm_clk_get(dev, "refclk");
if (IS_ERR(cdns_phy->clk)) {
dev_err(dev, "phy ref clock not found\n");
return PTR_ERR(cdns_phy->clk);
}
- regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- cdns_phy->sd_base = devm_ioremap_resource(&pdev->dev, regs);
+ cdns_phy->sd_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(cdns_phy->sd_base))
return PTR_ERR(cdns_phy->sd_base);
@@ -1751,14 +2124,39 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev)
if (subnodes == 0) {
dev_err(dev, "No available link subnodes found\n");
return -EINVAL;
- } else if (subnodes != 1) {
- dev_err(dev, "Driver supports only one link subnode.\n");
+ }
+
+ ret = cdns_torrent_regmap_init(cdns_phy);
+ if (ret)
+ return ret;
+
+ ret = cdns_torrent_regfield_init(cdns_phy);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(cdns_phy->clk);
+ if (ret) {
+ dev_err(cdns_phy->dev, "Failed to prepare ref clock\n");
+ return ret;
+ }
+
+ cdns_phy->ref_clk_rate = clk_get_rate(cdns_phy->clk);
+ if (!(cdns_phy->ref_clk_rate)) {
+ dev_err(cdns_phy->dev, "Failed to get ref clock rate\n");
+ clk_disable_unprepare(cdns_phy->clk);
return -EINVAL;
}
+ /* Enable APB */
+ reset_control_deassert(cdns_phy->apb_rst);
+
for_each_available_child_of_node(dev->of_node, child) {
struct phy *gphy;
+ /* PHY subnode name must be 'phy'. */
+ if (!(of_node_name_eq(child, "phy")))
+ continue;
+
cdns_phy->phys[node].lnk_rst =
of_reset_control_array_get_exclusive(child);
if (IS_ERR(cdns_phy->phys[node].lnk_rst)) {
@@ -1776,27 +2174,57 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev)
goto put_child;
}
- if (cdns_phy->phys[node].mlane != 0) {
- dev_err(dev,
- "%s: Driver supports only lane-0 as master lane.\n",
+ if (of_property_read_u32(child, "cdns,phy-type", &phy_type)) {
+ dev_err(dev, "%s: No \"cdns,phy-type\"-property.\n",
child->full_name);
ret = -EINVAL;
goto put_child;
}
- if (of_property_read_u32(child, "cdns,phy-type",
- &cdns_phy->phys[node].phy_type)) {
- dev_err(dev, "%s: No \"cdns,phy-type\"-property.\n",
+ switch (phy_type) {
+ case PHY_TYPE_PCIE:
+ cdns_phy->phys[node].phy_type = TYPE_PCIE;
+ break;
+ case PHY_TYPE_DP:
+ cdns_phy->phys[node].phy_type = TYPE_DP;
+ break;
+ case PHY_TYPE_SGMII:
+ cdns_phy->phys[node].phy_type = TYPE_SGMII;
+ break;
+ case PHY_TYPE_QSGMII:
+ cdns_phy->phys[node].phy_type = TYPE_QSGMII;
+ break;
+ case PHY_TYPE_USB3:
+ cdns_phy->phys[node].phy_type = TYPE_USB;
+ break;
+ default:
+ dev_err(dev, "Unsupported protocol\n");
+ ret = -EINVAL;
+ goto put_child;
+ }
+
+ if (of_property_read_u32(child, "cdns,num-lanes",
+ &cdns_phy->phys[node].num_lanes)) {
+ dev_err(dev, "%s: No \"cdns,num-lanes\"-property.\n",
child->full_name);
ret = -EINVAL;
goto put_child;
}
- cdns_phy->phys[node].num_lanes = DEFAULT_NUM_LANES;
- of_property_read_u32(child, "cdns,num-lanes",
- &cdns_phy->phys[node].num_lanes);
+ total_num_lanes += cdns_phy->phys[node].num_lanes;
+
+ /* Get SSC mode */
+ cdns_phy->phys[node].ssc_mode = NO_SSC;
+ of_property_read_u32(child, "cdns,ssc-mode",
+ &cdns_phy->phys[node].ssc_mode);
+
+ gphy = devm_phy_create(dev, child, &cdns_torrent_phy_ops);
+ if (IS_ERR(gphy)) {
+ ret = PTR_ERR(gphy);
+ goto put_child;
+ }
- if (cdns_phy->phys[node].phy_type == PHY_TYPE_DP) {
+ if (cdns_phy->phys[node].phy_type == TYPE_DP) {
switch (cdns_phy->phys[node].num_lanes) {
case 1:
case 2:
@@ -1833,30 +2261,34 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev)
}
/* DPTX registers */
- regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- cdns_phy->base = devm_ioremap_resource(&pdev->dev,
- regs);
+ cdns_phy->base = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(cdns_phy->base)) {
ret = PTR_ERR(cdns_phy->base);
goto put_child;
}
- gphy = devm_phy_create(dev, child,
- &cdns_torrent_phy_ops);
- if (IS_ERR(gphy)) {
- ret = PTR_ERR(gphy);
- goto put_child;
+ if (!init_dp_regmap) {
+ ret = cdns_torrent_dp_regmap_init(cdns_phy);
+ if (ret)
+ goto put_child;
+
+ ret = cdns_torrent_dp_regfield_init(cdns_phy);
+ if (ret)
+ goto put_child;
+
+ init_dp_regmap++;
}
dev_info(dev, "%d lanes, max bit rate %d.%03d Gbps\n",
cdns_phy->phys[node].num_lanes,
cdns_phy->max_bit_rate / 1000,
cdns_phy->max_bit_rate % 1000);
- } else {
- dev_err(dev, "Driver supports only PHY_TYPE_DP\n");
- ret = -ENOTSUPP;
- goto put_child;
+
+ gphy->attrs.bus_width = cdns_phy->phys[node].num_lanes;
+ gphy->attrs.max_link_rate = cdns_phy->max_bit_rate;
+ gphy->attrs.mode = PHY_MODE_DP;
}
+
cdns_phy->phys[node].phy = gphy;
phy_set_drvdata(gphy, &cdns_phy->phys[node]);
@@ -1864,16 +2296,16 @@ static int cdns_torrent_phy_probe(struct platform_device *pdev)
}
cdns_phy->nsubnodes = node;
- ret = cdns_regmap_init_torrent_dp(cdns_phy, cdns_phy->sd_base,
- cdns_phy->base,
- data->block_offset_shift,
- data->reg_offset_shift);
- if (ret)
+ if (total_num_lanes > MAX_NUM_LANES) {
+ dev_err(dev, "Invalid lane configuration\n");
goto put_lnk_rst;
+ }
- ret = cdns_regfield_init(cdns_phy);
- if (ret)
- goto put_lnk_rst;
+ if (cdns_phy->nsubnodes > 1) {
+ ret = cdns_torrent_phy_configure_multilink(cdns_phy);
+ if (ret)
+ goto put_lnk_rst;
+ }
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(phy_provider)) {
@@ -1889,6 +2321,8 @@ put_lnk_rst:
for (i = 0; i < node; i++)
reset_control_put(cdns_phy->phys[i].lnk_rst);
of_node_put(child);
+ reset_control_assert(cdns_phy->apb_rst);
+ clk_disable_unprepare(cdns_phy->clk);
return ret;
}
@@ -1898,22 +2332,1505 @@ static int cdns_torrent_phy_remove(struct platform_device *pdev)
int i;
reset_control_assert(cdns_phy->phy_rst);
+ reset_control_assert(cdns_phy->apb_rst);
for (i = 0; i < cdns_phy->nsubnodes; i++) {
reset_control_assert(cdns_phy->phys[i].lnk_rst);
reset_control_put(cdns_phy->phys[i].lnk_rst);
}
+ clk_disable_unprepare(cdns_phy->clk);
+
return 0;
}
+/* USB and SGMII/QSGMII link configuration */
+static struct cdns_reg_pairs usb_sgmii_link_cmn_regs[] = {
+ {0x0002, PHY_PLL_CFG},
+ {0x8600, CMN_PDIAG_PLL0_CLK_SEL_M0},
+ {0x0601, CMN_PDIAG_PLL1_CLK_SEL_M0}
+};
+
+static struct cdns_reg_pairs usb_sgmii_xcvr_diag_ln_regs[] = {
+ {0x0000, XCVR_DIAG_HSCLK_SEL},
+ {0x0001, XCVR_DIAG_HSCLK_DIV},
+ {0x0041, XCVR_DIAG_PLLDRC_CTRL}
+};
+
+static struct cdns_reg_pairs sgmii_usb_xcvr_diag_ln_regs[] = {
+ {0x0011, XCVR_DIAG_HSCLK_SEL},
+ {0x0003, XCVR_DIAG_HSCLK_DIV},
+ {0x009B, XCVR_DIAG_PLLDRC_CTRL}
+};
+
+static struct cdns_torrent_vals usb_sgmii_link_cmn_vals = {
+ .reg_pairs = usb_sgmii_link_cmn_regs,
+ .num_regs = ARRAY_SIZE(usb_sgmii_link_cmn_regs),
+};
+
+static struct cdns_torrent_vals usb_sgmii_xcvr_diag_ln_vals = {
+ .reg_pairs = usb_sgmii_xcvr_diag_ln_regs,
+ .num_regs = ARRAY_SIZE(usb_sgmii_xcvr_diag_ln_regs),
+};
+
+static struct cdns_torrent_vals sgmii_usb_xcvr_diag_ln_vals = {
+ .reg_pairs = sgmii_usb_xcvr_diag_ln_regs,
+ .num_regs = ARRAY_SIZE(sgmii_usb_xcvr_diag_ln_regs),
+};
+
+/* PCIe and USB Unique SSC link configuration */
+static struct cdns_reg_pairs pcie_usb_link_cmn_regs[] = {
+ {0x0003, PHY_PLL_CFG},
+ {0x0601, CMN_PDIAG_PLL0_CLK_SEL_M0},
+ {0x0400, CMN_PDIAG_PLL0_CLK_SEL_M1},
+ {0x8600, CMN_PDIAG_PLL1_CLK_SEL_M0}
+};
+
+static struct cdns_reg_pairs pcie_usb_xcvr_diag_ln_regs[] = {
+ {0x0000, XCVR_DIAG_HSCLK_SEL},
+ {0x0001, XCVR_DIAG_HSCLK_DIV},
+ {0x0012, XCVR_DIAG_PLLDRC_CTRL}
+};
+
+static struct cdns_reg_pairs usb_pcie_xcvr_diag_ln_regs[] = {
+ {0x0011, XCVR_DIAG_HSCLK_SEL},
+ {0x0001, XCVR_DIAG_HSCLK_DIV},
+ {0x00C9, XCVR_DIAG_PLLDRC_CTRL}
+};
+
+static struct cdns_torrent_vals pcie_usb_link_cmn_vals = {
+ .reg_pairs = pcie_usb_link_cmn_regs,
+ .num_regs = ARRAY_SIZE(pcie_usb_link_cmn_regs),
+};
+
+static struct cdns_torrent_vals pcie_usb_xcvr_diag_ln_vals = {
+ .reg_pairs = pcie_usb_xcvr_diag_ln_regs,
+ .num_regs = ARRAY_SIZE(pcie_usb_xcvr_diag_ln_regs),
+};
+
+static struct cdns_torrent_vals usb_pcie_xcvr_diag_ln_vals = {
+ .reg_pairs = usb_pcie_xcvr_diag_ln_regs,
+ .num_regs = ARRAY_SIZE(usb_pcie_xcvr_diag_ln_regs),
+};
+
+/* USB 100 MHz Ref clk, internal SSC */
+static struct cdns_reg_pairs usb_100_int_ssc_cmn_regs[] = {
+ {0x0004, CMN_PLL0_DSM_DIAG_M0},
+ {0x0004, CMN_PLL0_DSM_DIAG_M1},
+ {0x0004, CMN_PLL1_DSM_DIAG_M0},
+ {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0},
+ {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M1},
+ {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M1},
+ {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M1},
+ {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0},
+ {0x0064, CMN_PLL0_INTDIV_M0},
+ {0x0050, CMN_PLL0_INTDIV_M1},
+ {0x0064, CMN_PLL1_INTDIV_M0},
+ {0x0002, CMN_PLL0_FRACDIVH_M0},
+ {0x0002, CMN_PLL0_FRACDIVH_M1},
+ {0x0002, CMN_PLL1_FRACDIVH_M0},
+ {0x0044, CMN_PLL0_HIGH_THR_M0},
+ {0x0036, CMN_PLL0_HIGH_THR_M1},
+ {0x0044, CMN_PLL1_HIGH_THR_M0},
+ {0x0002, CMN_PDIAG_PLL0_CTRL_M0},
+ {0x0002, CMN_PDIAG_PLL0_CTRL_M1},
+ {0x0002, CMN_PDIAG_PLL1_CTRL_M0},
+ {0x0001, CMN_PLL0_SS_CTRL1_M0},
+ {0x0001, CMN_PLL0_SS_CTRL1_M1},
+ {0x0001, CMN_PLL1_SS_CTRL1_M0},
+ {0x011B, CMN_PLL0_SS_CTRL2_M0},
+ {0x011B, CMN_PLL0_SS_CTRL2_M1},
+ {0x011B, CMN_PLL1_SS_CTRL2_M0},
+ {0x006E, CMN_PLL0_SS_CTRL3_M0},
+ {0x0058, CMN_PLL0_SS_CTRL3_M1},
+ {0x006E, CMN_PLL1_SS_CTRL3_M0},
+ {0x000E, CMN_PLL0_SS_CTRL4_M0},
+ {0x0012, CMN_PLL0_SS_CTRL4_M1},
+ {0x000E, CMN_PLL1_SS_CTRL4_M0},
+ {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START},
+ {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START},
+ {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START},
+ {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START},
+ {0x0003, CMN_PLL0_VCOCAL_TCTRL},
+ {0x0003, CMN_PLL1_VCOCAL_TCTRL},
+ {0x00C7, CMN_PLL0_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL0_LOCK_PLLCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_PLLCNT_START},
+ {0x0005, CMN_PLL0_LOCK_PLLCNT_THR},
+ {0x0005, CMN_PLL1_LOCK_PLLCNT_THR},
+ {0x8200, CMN_CDIAG_CDB_PWRI_OVRD},
+ {0x8200, CMN_CDIAG_XCVRC_PWRI_OVRD}
+};
+
+static struct cdns_torrent_vals usb_100_int_ssc_cmn_vals = {
+ .reg_pairs = usb_100_int_ssc_cmn_regs,
+ .num_regs = ARRAY_SIZE(usb_100_int_ssc_cmn_regs),
+};
+
+/* Single USB link configuration */
+static struct cdns_reg_pairs sl_usb_link_cmn_regs[] = {
+ {0x0000, PHY_PLL_CFG},
+ {0x8600, CMN_PDIAG_PLL0_CLK_SEL_M0}
+};
+
+static struct cdns_reg_pairs sl_usb_xcvr_diag_ln_regs[] = {
+ {0x0000, XCVR_DIAG_HSCLK_SEL},
+ {0x0001, XCVR_DIAG_HSCLK_DIV},
+ {0x0041, XCVR_DIAG_PLLDRC_CTRL}
+};
+
+static struct cdns_torrent_vals sl_usb_link_cmn_vals = {
+ .reg_pairs = sl_usb_link_cmn_regs,
+ .num_regs = ARRAY_SIZE(sl_usb_link_cmn_regs),
+};
+
+static struct cdns_torrent_vals sl_usb_xcvr_diag_ln_vals = {
+ .reg_pairs = sl_usb_xcvr_diag_ln_regs,
+ .num_regs = ARRAY_SIZE(sl_usb_xcvr_diag_ln_regs),
+};
+
+/* USB PHY PCS common configuration */
+static struct cdns_reg_pairs usb_phy_pcs_cmn_regs[] = {
+ {0x0A0A, PHY_PIPE_USB3_GEN2_PRE_CFG0},
+ {0x1000, PHY_PIPE_USB3_GEN2_POST_CFG0},
+ {0x0010, PHY_PIPE_USB3_GEN2_POST_CFG1}
+};
+
+static struct cdns_torrent_vals usb_phy_pcs_cmn_vals = {
+ .reg_pairs = usb_phy_pcs_cmn_regs,
+ .num_regs = ARRAY_SIZE(usb_phy_pcs_cmn_regs),
+};
+
+/* USB 100 MHz Ref clk, no SSC */
+static struct cdns_reg_pairs usb_100_no_ssc_cmn_regs[] = {
+ {0x0003, CMN_PLL0_VCOCAL_TCTRL},
+ {0x0003, CMN_PLL1_VCOCAL_TCTRL},
+ {0x8200, CMN_CDIAG_CDB_PWRI_OVRD},
+ {0x8200, CMN_CDIAG_XCVRC_PWRI_OVRD}
+};
+
+static struct cdns_reg_pairs usb_100_no_ssc_tx_ln_regs[] = {
+ {0x02FF, TX_PSC_A0},
+ {0x06AF, TX_PSC_A1},
+ {0x06AE, TX_PSC_A2},
+ {0x06AE, TX_PSC_A3},
+ {0x2A82, TX_TXCC_CTRL},
+ {0x0014, TX_TXCC_CPOST_MULT_01},
+ {0x0003, XCVR_DIAG_PSC_OVRD}
+};
+
+static struct cdns_reg_pairs usb_100_no_ssc_rx_ln_regs[] = {
+ {0x0D1D, RX_PSC_A0},
+ {0x0D1D, RX_PSC_A1},
+ {0x0D00, RX_PSC_A2},
+ {0x0500, RX_PSC_A3},
+ {0x0013, RX_SIGDET_HL_FILT_TMR},
+ {0x0000, RX_REE_GCSM1_CTRL},
+ {0x0C02, RX_REE_ATTEN_THR},
+ {0x0330, RX_REE_SMGM_CTRL1},
+ {0x0300, RX_REE_SMGM_CTRL2},
+ {0x0019, RX_REE_TAP1_CLIP},
+ {0x0019, RX_REE_TAP2TON_CLIP},
+ {0x1004, RX_DIAG_SIGDET_TUNE},
+ {0x00F9, RX_DIAG_NQST_CTRL},
+ {0x0C01, RX_DIAG_DFE_AMP_TUNE_2},
+ {0x0002, RX_DIAG_DFE_AMP_TUNE_3},
+ {0x0000, RX_DIAG_PI_CAP},
+ {0x0031, RX_DIAG_PI_RATE},
+ {0x0001, RX_DIAG_ACYA},
+ {0x018C, RX_CDRLF_CNFG},
+ {0x0003, RX_CDRLF_CNFG3}
+};
+
+static struct cdns_torrent_vals usb_100_no_ssc_cmn_vals = {
+ .reg_pairs = usb_100_no_ssc_cmn_regs,
+ .num_regs = ARRAY_SIZE(usb_100_no_ssc_cmn_regs),
+};
+
+static struct cdns_torrent_vals usb_100_no_ssc_tx_ln_vals = {
+ .reg_pairs = usb_100_no_ssc_tx_ln_regs,
+ .num_regs = ARRAY_SIZE(usb_100_no_ssc_tx_ln_regs),
+};
+
+static struct cdns_torrent_vals usb_100_no_ssc_rx_ln_vals = {
+ .reg_pairs = usb_100_no_ssc_rx_ln_regs,
+ .num_regs = ARRAY_SIZE(usb_100_no_ssc_rx_ln_regs),
+};
+
+/* Single link USB, 100 MHz Ref clk, internal SSC */
+static struct cdns_reg_pairs sl_usb_100_int_ssc_cmn_regs[] = {
+ {0x0004, CMN_PLL0_DSM_DIAG_M0},
+ {0x0004, CMN_PLL1_DSM_DIAG_M0},
+ {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0},
+ {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0},
+ {0x0064, CMN_PLL0_INTDIV_M0},
+ {0x0064, CMN_PLL1_INTDIV_M0},
+ {0x0002, CMN_PLL0_FRACDIVH_M0},
+ {0x0002, CMN_PLL1_FRACDIVH_M0},
+ {0x0044, CMN_PLL0_HIGH_THR_M0},
+ {0x0044, CMN_PLL1_HIGH_THR_M0},
+ {0x0002, CMN_PDIAG_PLL0_CTRL_M0},
+ {0x0002, CMN_PDIAG_PLL1_CTRL_M0},
+ {0x0001, CMN_PLL0_SS_CTRL1_M0},
+ {0x0001, CMN_PLL1_SS_CTRL1_M0},
+ {0x011B, CMN_PLL0_SS_CTRL2_M0},
+ {0x011B, CMN_PLL1_SS_CTRL2_M0},
+ {0x006E, CMN_PLL0_SS_CTRL3_M0},
+ {0x006E, CMN_PLL1_SS_CTRL3_M0},
+ {0x000E, CMN_PLL0_SS_CTRL4_M0},
+ {0x000E, CMN_PLL1_SS_CTRL4_M0},
+ {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START},
+ {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START},
+ {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START},
+ {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START},
+ {0x0003, CMN_PLL0_VCOCAL_TCTRL},
+ {0x0003, CMN_PLL1_VCOCAL_TCTRL},
+ {0x00C7, CMN_PLL0_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL0_LOCK_PLLCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_PLLCNT_START},
+ {0x0005, CMN_PLL0_LOCK_PLLCNT_THR},
+ {0x0005, CMN_PLL1_LOCK_PLLCNT_THR},
+ {0x8200, CMN_CDIAG_CDB_PWRI_OVRD},
+ {0x8200, CMN_CDIAG_XCVRC_PWRI_OVRD}
+};
+
+static struct cdns_torrent_vals sl_usb_100_int_ssc_cmn_vals = {
+ .reg_pairs = sl_usb_100_int_ssc_cmn_regs,
+ .num_regs = ARRAY_SIZE(sl_usb_100_int_ssc_cmn_regs),
+};
+
+/* PCIe and SGMII/QSGMII Unique SSC link configuration */
+static struct cdns_reg_pairs pcie_sgmii_link_cmn_regs[] = {
+ {0x0003, PHY_PLL_CFG},
+ {0x0601, CMN_PDIAG_PLL0_CLK_SEL_M0},
+ {0x0400, CMN_PDIAG_PLL0_CLK_SEL_M1},
+ {0x0601, CMN_PDIAG_PLL1_CLK_SEL_M0}
+};
+
+static struct cdns_reg_pairs pcie_sgmii_xcvr_diag_ln_regs[] = {
+ {0x0000, XCVR_DIAG_HSCLK_SEL},
+ {0x0001, XCVR_DIAG_HSCLK_DIV},
+ {0x0012, XCVR_DIAG_PLLDRC_CTRL}
+};
+
+static struct cdns_reg_pairs sgmii_pcie_xcvr_diag_ln_regs[] = {
+ {0x0011, XCVR_DIAG_HSCLK_SEL},
+ {0x0003, XCVR_DIAG_HSCLK_DIV},
+ {0x009B, XCVR_DIAG_PLLDRC_CTRL}
+};
+
+static struct cdns_torrent_vals pcie_sgmii_link_cmn_vals = {
+ .reg_pairs = pcie_sgmii_link_cmn_regs,
+ .num_regs = ARRAY_SIZE(pcie_sgmii_link_cmn_regs),
+};
+
+static struct cdns_torrent_vals pcie_sgmii_xcvr_diag_ln_vals = {
+ .reg_pairs = pcie_sgmii_xcvr_diag_ln_regs,
+ .num_regs = ARRAY_SIZE(pcie_sgmii_xcvr_diag_ln_regs),
+};
+
+static struct cdns_torrent_vals sgmii_pcie_xcvr_diag_ln_vals = {
+ .reg_pairs = sgmii_pcie_xcvr_diag_ln_regs,
+ .num_regs = ARRAY_SIZE(sgmii_pcie_xcvr_diag_ln_regs),
+};
+
+/* SGMII 100 MHz Ref clk, no SSC */
+static struct cdns_reg_pairs sgmii_100_no_ssc_cmn_regs[] = {
+ {0x0003, CMN_PLL0_VCOCAL_TCTRL},
+ {0x0003, CMN_PLL1_VCOCAL_TCTRL},
+ {0x3700, CMN_DIAG_BIAS_OVRD1},
+ {0x0008, CMN_TXPUCAL_TUNE},
+ {0x0008, CMN_TXPDCAL_TUNE}
+};
+
+static struct cdns_reg_pairs sgmii_100_no_ssc_tx_ln_regs[] = {
+ {0x00F3, TX_PSC_A0},
+ {0x04A2, TX_PSC_A2},
+ {0x04A2, TX_PSC_A3},
+ {0x0000, TX_TXCC_CPOST_MULT_00},
+ {0x00B3, DRV_DIAG_TX_DRV}
+};
+
+static struct cdns_reg_pairs sgmii_100_no_ssc_rx_ln_regs[] = {
+ {0x091D, RX_PSC_A0},
+ {0x0900, RX_PSC_A2},
+ {0x0100, RX_PSC_A3},
+ {0x03C7, RX_REE_GCSM1_EQENM_PH1},
+ {0x01C7, RX_REE_GCSM1_EQENM_PH2},
+ {0x0000, RX_DIAG_DFE_CTRL},
+ {0x0019, RX_REE_TAP1_CLIP},
+ {0x0019, RX_REE_TAP2TON_CLIP},
+ {0x0098, RX_DIAG_NQST_CTRL},
+ {0x0C01, RX_DIAG_DFE_AMP_TUNE_2},
+ {0x0000, RX_DIAG_DFE_AMP_TUNE_3},
+ {0x0000, RX_DIAG_PI_CAP},
+ {0x0010, RX_DIAG_PI_RATE},
+ {0x0001, RX_DIAG_ACYA},
+ {0x018C, RX_CDRLF_CNFG},
+};
+
+static struct cdns_torrent_vals sgmii_100_no_ssc_cmn_vals = {
+ .reg_pairs = sgmii_100_no_ssc_cmn_regs,
+ .num_regs = ARRAY_SIZE(sgmii_100_no_ssc_cmn_regs),
+};
+
+static struct cdns_torrent_vals sgmii_100_no_ssc_tx_ln_vals = {
+ .reg_pairs = sgmii_100_no_ssc_tx_ln_regs,
+ .num_regs = ARRAY_SIZE(sgmii_100_no_ssc_tx_ln_regs),
+};
+
+static struct cdns_torrent_vals sgmii_100_no_ssc_rx_ln_vals = {
+ .reg_pairs = sgmii_100_no_ssc_rx_ln_regs,
+ .num_regs = ARRAY_SIZE(sgmii_100_no_ssc_rx_ln_regs),
+};
+
+/* SGMII 100 MHz Ref clk, internal SSC */
+static struct cdns_reg_pairs sgmii_100_int_ssc_cmn_regs[] = {
+ {0x0004, CMN_PLL0_DSM_DIAG_M0},
+ {0x0004, CMN_PLL0_DSM_DIAG_M1},
+ {0x0004, CMN_PLL1_DSM_DIAG_M0},
+ {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0},
+ {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M1},
+ {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M1},
+ {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M1},
+ {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0},
+ {0x0064, CMN_PLL0_INTDIV_M0},
+ {0x0050, CMN_PLL0_INTDIV_M1},
+ {0x0064, CMN_PLL1_INTDIV_M0},
+ {0x0002, CMN_PLL0_FRACDIVH_M0},
+ {0x0002, CMN_PLL0_FRACDIVH_M1},
+ {0x0002, CMN_PLL1_FRACDIVH_M0},
+ {0x0044, CMN_PLL0_HIGH_THR_M0},
+ {0x0036, CMN_PLL0_HIGH_THR_M1},
+ {0x0044, CMN_PLL1_HIGH_THR_M0},
+ {0x0002, CMN_PDIAG_PLL0_CTRL_M0},
+ {0x0002, CMN_PDIAG_PLL0_CTRL_M1},
+ {0x0002, CMN_PDIAG_PLL1_CTRL_M0},
+ {0x0001, CMN_PLL0_SS_CTRL1_M0},
+ {0x0001, CMN_PLL0_SS_CTRL1_M1},
+ {0x0001, CMN_PLL1_SS_CTRL1_M0},
+ {0x011B, CMN_PLL0_SS_CTRL2_M0},
+ {0x011B, CMN_PLL0_SS_CTRL2_M1},
+ {0x011B, CMN_PLL1_SS_CTRL2_M0},
+ {0x006E, CMN_PLL0_SS_CTRL3_M0},
+ {0x0058, CMN_PLL0_SS_CTRL3_M1},
+ {0x006E, CMN_PLL1_SS_CTRL3_M0},
+ {0x000E, CMN_PLL0_SS_CTRL4_M0},
+ {0x0012, CMN_PLL0_SS_CTRL4_M1},
+ {0x000E, CMN_PLL1_SS_CTRL4_M0},
+ {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START},
+ {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START},
+ {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START},
+ {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START},
+ {0x0003, CMN_PLL0_VCOCAL_TCTRL},
+ {0x0003, CMN_PLL1_VCOCAL_TCTRL},
+ {0x00C7, CMN_PLL0_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL0_LOCK_PLLCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_PLLCNT_START},
+ {0x0005, CMN_PLL0_LOCK_PLLCNT_THR},
+ {0x0005, CMN_PLL1_LOCK_PLLCNT_THR},
+ {0x3700, CMN_DIAG_BIAS_OVRD1},
+ {0x0008, CMN_TXPUCAL_TUNE},
+ {0x0008, CMN_TXPDCAL_TUNE}
+};
+
+static struct cdns_torrent_vals sgmii_100_int_ssc_cmn_vals = {
+ .reg_pairs = sgmii_100_int_ssc_cmn_regs,
+ .num_regs = ARRAY_SIZE(sgmii_100_int_ssc_cmn_regs),
+};
+
+/* QSGMII 100 MHz Ref clk, no SSC */
+static struct cdns_reg_pairs qsgmii_100_no_ssc_cmn_regs[] = {
+ {0x0003, CMN_PLL0_VCOCAL_TCTRL},
+ {0x0003, CMN_PLL1_VCOCAL_TCTRL}
+};
+
+static struct cdns_reg_pairs qsgmii_100_no_ssc_tx_ln_regs[] = {
+ {0x00F3, TX_PSC_A0},
+ {0x04A2, TX_PSC_A2},
+ {0x04A2, TX_PSC_A3},
+ {0x0000, TX_TXCC_CPOST_MULT_00},
+ {0x0003, DRV_DIAG_TX_DRV}
+};
+
+static struct cdns_reg_pairs qsgmii_100_no_ssc_rx_ln_regs[] = {
+ {0x091D, RX_PSC_A0},
+ {0x0900, RX_PSC_A2},
+ {0x0100, RX_PSC_A3},
+ {0x03C7, RX_REE_GCSM1_EQENM_PH1},
+ {0x01C7, RX_REE_GCSM1_EQENM_PH2},
+ {0x0000, RX_DIAG_DFE_CTRL},
+ {0x0019, RX_REE_TAP1_CLIP},
+ {0x0019, RX_REE_TAP2TON_CLIP},
+ {0x0098, RX_DIAG_NQST_CTRL},
+ {0x0C01, RX_DIAG_DFE_AMP_TUNE_2},
+ {0x0000, RX_DIAG_DFE_AMP_TUNE_3},
+ {0x0000, RX_DIAG_PI_CAP},
+ {0x0010, RX_DIAG_PI_RATE},
+ {0x0001, RX_DIAG_ACYA},
+ {0x018C, RX_CDRLF_CNFG},
+};
+
+static struct cdns_torrent_vals qsgmii_100_no_ssc_cmn_vals = {
+ .reg_pairs = qsgmii_100_no_ssc_cmn_regs,
+ .num_regs = ARRAY_SIZE(qsgmii_100_no_ssc_cmn_regs),
+};
+
+static struct cdns_torrent_vals qsgmii_100_no_ssc_tx_ln_vals = {
+ .reg_pairs = qsgmii_100_no_ssc_tx_ln_regs,
+ .num_regs = ARRAY_SIZE(qsgmii_100_no_ssc_tx_ln_regs),
+};
+
+static struct cdns_torrent_vals qsgmii_100_no_ssc_rx_ln_vals = {
+ .reg_pairs = qsgmii_100_no_ssc_rx_ln_regs,
+ .num_regs = ARRAY_SIZE(qsgmii_100_no_ssc_rx_ln_regs),
+};
+
+/* QSGMII 100 MHz Ref clk, internal SSC */
+static struct cdns_reg_pairs qsgmii_100_int_ssc_cmn_regs[] = {
+ {0x0004, CMN_PLL0_DSM_DIAG_M0},
+ {0x0004, CMN_PLL0_DSM_DIAG_M1},
+ {0x0004, CMN_PLL1_DSM_DIAG_M0},
+ {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0},
+ {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M1},
+ {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M1},
+ {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M1},
+ {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0},
+ {0x0064, CMN_PLL0_INTDIV_M0},
+ {0x0050, CMN_PLL0_INTDIV_M1},
+ {0x0064, CMN_PLL1_INTDIV_M0},
+ {0x0002, CMN_PLL0_FRACDIVH_M0},
+ {0x0002, CMN_PLL0_FRACDIVH_M1},
+ {0x0002, CMN_PLL1_FRACDIVH_M0},
+ {0x0044, CMN_PLL0_HIGH_THR_M0},
+ {0x0036, CMN_PLL0_HIGH_THR_M1},
+ {0x0044, CMN_PLL1_HIGH_THR_M0},
+ {0x0002, CMN_PDIAG_PLL0_CTRL_M0},
+ {0x0002, CMN_PDIAG_PLL0_CTRL_M1},
+ {0x0002, CMN_PDIAG_PLL1_CTRL_M0},
+ {0x0001, CMN_PLL0_SS_CTRL1_M0},
+ {0x0001, CMN_PLL0_SS_CTRL1_M1},
+ {0x0001, CMN_PLL1_SS_CTRL1_M0},
+ {0x011B, CMN_PLL0_SS_CTRL2_M0},
+ {0x011B, CMN_PLL0_SS_CTRL2_M1},
+ {0x011B, CMN_PLL1_SS_CTRL2_M0},
+ {0x006E, CMN_PLL0_SS_CTRL3_M0},
+ {0x0058, CMN_PLL0_SS_CTRL3_M1},
+ {0x006E, CMN_PLL1_SS_CTRL3_M0},
+ {0x000E, CMN_PLL0_SS_CTRL4_M0},
+ {0x0012, CMN_PLL0_SS_CTRL4_M1},
+ {0x000E, CMN_PLL1_SS_CTRL4_M0},
+ {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START},
+ {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START},
+ {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START},
+ {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START},
+ {0x0003, CMN_PLL0_VCOCAL_TCTRL},
+ {0x0003, CMN_PLL1_VCOCAL_TCTRL},
+ {0x00C7, CMN_PLL0_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL0_LOCK_PLLCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_PLLCNT_START},
+ {0x0005, CMN_PLL0_LOCK_PLLCNT_THR},
+ {0x0005, CMN_PLL1_LOCK_PLLCNT_THR}
+};
+
+static struct cdns_torrent_vals qsgmii_100_int_ssc_cmn_vals = {
+ .reg_pairs = qsgmii_100_int_ssc_cmn_regs,
+ .num_regs = ARRAY_SIZE(qsgmii_100_int_ssc_cmn_regs),
+};
+
+/* Single SGMII/QSGMII link configuration */
+static struct cdns_reg_pairs sl_sgmii_link_cmn_regs[] = {
+ {0x0000, PHY_PLL_CFG},
+ {0x0601, CMN_PDIAG_PLL0_CLK_SEL_M0}
+};
+
+static struct cdns_reg_pairs sl_sgmii_xcvr_diag_ln_regs[] = {
+ {0x0000, XCVR_DIAG_HSCLK_SEL},
+ {0x0003, XCVR_DIAG_HSCLK_DIV},
+ {0x0013, XCVR_DIAG_PLLDRC_CTRL}
+};
+
+static struct cdns_torrent_vals sl_sgmii_link_cmn_vals = {
+ .reg_pairs = sl_sgmii_link_cmn_regs,
+ .num_regs = ARRAY_SIZE(sl_sgmii_link_cmn_regs),
+};
+
+static struct cdns_torrent_vals sl_sgmii_xcvr_diag_ln_vals = {
+ .reg_pairs = sl_sgmii_xcvr_diag_ln_regs,
+ .num_regs = ARRAY_SIZE(sl_sgmii_xcvr_diag_ln_regs),
+};
+
+/* Multi link PCIe, 100 MHz Ref clk, internal SSC */
+static struct cdns_reg_pairs pcie_100_int_ssc_cmn_regs[] = {
+ {0x0004, CMN_PLL0_DSM_DIAG_M0},
+ {0x0004, CMN_PLL0_DSM_DIAG_M1},
+ {0x0004, CMN_PLL1_DSM_DIAG_M0},
+ {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0},
+ {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M1},
+ {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M1},
+ {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M1},
+ {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0},
+ {0x0064, CMN_PLL0_INTDIV_M0},
+ {0x0050, CMN_PLL0_INTDIV_M1},
+ {0x0064, CMN_PLL1_INTDIV_M0},
+ {0x0002, CMN_PLL0_FRACDIVH_M0},
+ {0x0002, CMN_PLL0_FRACDIVH_M1},
+ {0x0002, CMN_PLL1_FRACDIVH_M0},
+ {0x0044, CMN_PLL0_HIGH_THR_M0},
+ {0x0036, CMN_PLL0_HIGH_THR_M1},
+ {0x0044, CMN_PLL1_HIGH_THR_M0},
+ {0x0002, CMN_PDIAG_PLL0_CTRL_M0},
+ {0x0002, CMN_PDIAG_PLL0_CTRL_M1},
+ {0x0002, CMN_PDIAG_PLL1_CTRL_M0},
+ {0x0001, CMN_PLL0_SS_CTRL1_M0},
+ {0x0001, CMN_PLL0_SS_CTRL1_M1},
+ {0x0001, CMN_PLL1_SS_CTRL1_M0},
+ {0x011B, CMN_PLL0_SS_CTRL2_M0},
+ {0x011B, CMN_PLL0_SS_CTRL2_M1},
+ {0x011B, CMN_PLL1_SS_CTRL2_M0},
+ {0x006E, CMN_PLL0_SS_CTRL3_M0},
+ {0x0058, CMN_PLL0_SS_CTRL3_M1},
+ {0x006E, CMN_PLL1_SS_CTRL3_M0},
+ {0x000E, CMN_PLL0_SS_CTRL4_M0},
+ {0x0012, CMN_PLL0_SS_CTRL4_M1},
+ {0x000E, CMN_PLL1_SS_CTRL4_M0},
+ {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START},
+ {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START},
+ {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START},
+ {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START},
+ {0x0003, CMN_PLL0_VCOCAL_TCTRL},
+ {0x0003, CMN_PLL1_VCOCAL_TCTRL},
+ {0x00C7, CMN_PLL0_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL0_LOCK_PLLCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_PLLCNT_START},
+ {0x0005, CMN_PLL0_LOCK_PLLCNT_THR},
+ {0x0005, CMN_PLL1_LOCK_PLLCNT_THR}
+};
+
+static struct cdns_torrent_vals pcie_100_int_ssc_cmn_vals = {
+ .reg_pairs = pcie_100_int_ssc_cmn_regs,
+ .num_regs = ARRAY_SIZE(pcie_100_int_ssc_cmn_regs),
+};
+
+/* Single link PCIe, 100 MHz Ref clk, internal SSC */
+static struct cdns_reg_pairs sl_pcie_100_int_ssc_cmn_regs[] = {
+ {0x0004, CMN_PLL0_DSM_DIAG_M0},
+ {0x0004, CMN_PLL0_DSM_DIAG_M1},
+ {0x0004, CMN_PLL1_DSM_DIAG_M0},
+ {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M0},
+ {0x0509, CMN_PDIAG_PLL0_CP_PADJ_M1},
+ {0x0509, CMN_PDIAG_PLL1_CP_PADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M0},
+ {0x0F00, CMN_PDIAG_PLL0_CP_IADJ_M1},
+ {0x0F00, CMN_PDIAG_PLL1_CP_IADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M0},
+ {0x0F08, CMN_PDIAG_PLL0_FILT_PADJ_M1},
+ {0x0F08, CMN_PDIAG_PLL1_FILT_PADJ_M0},
+ {0x0064, CMN_PLL0_INTDIV_M0},
+ {0x0050, CMN_PLL0_INTDIV_M1},
+ {0x0050, CMN_PLL1_INTDIV_M0},
+ {0x0002, CMN_PLL0_FRACDIVH_M0},
+ {0x0002, CMN_PLL0_FRACDIVH_M1},
+ {0x0002, CMN_PLL1_FRACDIVH_M0},
+ {0x0044, CMN_PLL0_HIGH_THR_M0},
+ {0x0036, CMN_PLL0_HIGH_THR_M1},
+ {0x0036, CMN_PLL1_HIGH_THR_M0},
+ {0x0002, CMN_PDIAG_PLL0_CTRL_M0},
+ {0x0002, CMN_PDIAG_PLL0_CTRL_M1},
+ {0x0002, CMN_PDIAG_PLL1_CTRL_M0},
+ {0x0001, CMN_PLL0_SS_CTRL1_M0},
+ {0x0001, CMN_PLL0_SS_CTRL1_M1},
+ {0x0001, CMN_PLL1_SS_CTRL1_M0},
+ {0x011B, CMN_PLL0_SS_CTRL2_M0},
+ {0x011B, CMN_PLL0_SS_CTRL2_M1},
+ {0x011B, CMN_PLL1_SS_CTRL2_M0},
+ {0x006E, CMN_PLL0_SS_CTRL3_M0},
+ {0x0058, CMN_PLL0_SS_CTRL3_M1},
+ {0x0058, CMN_PLL1_SS_CTRL3_M0},
+ {0x000E, CMN_PLL0_SS_CTRL4_M0},
+ {0x0012, CMN_PLL0_SS_CTRL4_M1},
+ {0x0012, CMN_PLL1_SS_CTRL4_M0},
+ {0x0C5E, CMN_PLL0_VCOCAL_REFTIM_START},
+ {0x0C5E, CMN_PLL1_VCOCAL_REFTIM_START},
+ {0x0C56, CMN_PLL0_VCOCAL_PLLCNT_START},
+ {0x0C56, CMN_PLL1_VCOCAL_PLLCNT_START},
+ {0x0003, CMN_PLL0_VCOCAL_TCTRL},
+ {0x0003, CMN_PLL1_VCOCAL_TCTRL},
+ {0x00C7, CMN_PLL0_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_REFCNT_START},
+ {0x00C7, CMN_PLL0_LOCK_PLLCNT_START},
+ {0x00C7, CMN_PLL1_LOCK_PLLCNT_START},
+ {0x0005, CMN_PLL0_LOCK_PLLCNT_THR},
+ {0x0005, CMN_PLL1_LOCK_PLLCNT_THR}
+};
+
+static struct cdns_torrent_vals sl_pcie_100_int_ssc_cmn_vals = {
+ .reg_pairs = sl_pcie_100_int_ssc_cmn_regs,
+ .num_regs = ARRAY_SIZE(sl_pcie_100_int_ssc_cmn_regs),
+};
+
+/* PCIe, 100 MHz Ref clk, no SSC & external SSC */
+static struct cdns_reg_pairs pcie_100_ext_no_ssc_cmn_regs[] = {
+ {0x0003, CMN_PLL0_VCOCAL_TCTRL},
+ {0x0003, CMN_PLL1_VCOCAL_TCTRL}
+};
+
+static struct cdns_reg_pairs pcie_100_ext_no_ssc_rx_ln_regs[] = {
+ {0x0019, RX_REE_TAP1_CLIP},
+ {0x0019, RX_REE_TAP2TON_CLIP},
+ {0x0001, RX_DIAG_ACYA}
+};
+
+static struct cdns_torrent_vals pcie_100_no_ssc_cmn_vals = {
+ .reg_pairs = pcie_100_ext_no_ssc_cmn_regs,
+ .num_regs = ARRAY_SIZE(pcie_100_ext_no_ssc_cmn_regs),
+};
+
+static struct cdns_torrent_vals pcie_100_no_ssc_rx_ln_vals = {
+ .reg_pairs = pcie_100_ext_no_ssc_rx_ln_regs,
+ .num_regs = ARRAY_SIZE(pcie_100_ext_no_ssc_rx_ln_regs),
+};
+
static const struct cdns_torrent_data cdns_map_torrent = {
.block_offset_shift = 0x2,
.reg_offset_shift = 0x2,
+ .link_cmn_vals = {
+ [TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &pcie_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &pcie_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &pcie_usb_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_usb_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_usb_link_cmn_vals,
+ },
+ },
+ [TYPE_SGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_sgmii_link_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &pcie_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &usb_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ },
+ },
+ [TYPE_QSGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_sgmii_link_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &pcie_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &usb_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ },
+ },
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_usb_link_cmn_vals,
+ [EXTERNAL_SSC] = &sl_usb_link_cmn_vals,
+ [INTERNAL_SSC] = &sl_usb_link_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &pcie_usb_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_usb_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_usb_link_cmn_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ },
+ },
+ },
+ .xcvr_diag_vals = {
+ [TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &pcie_usb_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &pcie_usb_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &pcie_usb_xcvr_diag_ln_vals,
+ },
+ },
+ [TYPE_SGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_sgmii_xcvr_diag_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ },
+ },
+ [TYPE_QSGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_sgmii_xcvr_diag_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ },
+ },
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_usb_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &sl_usb_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &sl_usb_xcvr_diag_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &usb_pcie_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &usb_pcie_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &usb_pcie_xcvr_diag_ln_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ },
+ },
+ },
+ .pcs_cmn_vals = {
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &usb_phy_pcs_cmn_vals,
+ [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &usb_phy_pcs_cmn_vals,
+ [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_phy_pcs_cmn_vals,
+ [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_phy_pcs_cmn_vals,
+ [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ },
+ },
+ },
+ .cmn_vals = {
+ [TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sl_pcie_100_int_ssc_cmn_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals,
+ },
+ },
+ [TYPE_SGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sgmii_100_int_ssc_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ },
+ },
+ [TYPE_QSGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &qsgmii_100_int_ssc_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ },
+ },
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &usb_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &usb_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &usb_100_int_ssc_cmn_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals,
+ },
+ },
+ },
+ .tx_ln_vals = {
+ [TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ },
+ [TYPE_SGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ },
+ },
+ [TYPE_QSGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ },
+ },
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ },
+ },
+ },
+ .rx_ln_vals = {
+ [TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ },
+ },
+ [TYPE_SGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ },
+ },
+ [TYPE_QSGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ },
+ },
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ },
+ },
+ },
};
static const struct cdns_torrent_data ti_j721e_map_torrent = {
.block_offset_shift = 0x0,
.reg_offset_shift = 0x1,
+ .link_cmn_vals = {
+ [TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &pcie_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &pcie_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &pcie_usb_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_usb_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_usb_link_cmn_vals,
+ },
+ },
+ [TYPE_SGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_sgmii_link_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &pcie_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &usb_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ },
+ },
+ [TYPE_QSGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_sgmii_link_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &pcie_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_link_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &usb_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ },
+ },
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_usb_link_cmn_vals,
+ [EXTERNAL_SSC] = &sl_usb_link_cmn_vals,
+ [INTERNAL_SSC] = &sl_usb_link_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &pcie_usb_link_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_usb_link_cmn_vals,
+ [INTERNAL_SSC] = &pcie_usb_link_cmn_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_sgmii_link_cmn_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ [INTERNAL_SSC] = &usb_sgmii_link_cmn_vals,
+ },
+ },
+ },
+ .xcvr_diag_vals = {
+ [TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &pcie_sgmii_xcvr_diag_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &pcie_usb_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &pcie_usb_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &pcie_usb_xcvr_diag_ln_vals,
+ },
+ },
+ [TYPE_SGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_sgmii_xcvr_diag_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ },
+ },
+ [TYPE_QSGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_sgmii_xcvr_diag_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &sgmii_pcie_xcvr_diag_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &sgmii_usb_xcvr_diag_ln_vals,
+ },
+ },
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sl_usb_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &sl_usb_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &sl_usb_xcvr_diag_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &usb_pcie_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &usb_pcie_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &usb_pcie_xcvr_diag_ln_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ [EXTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ [INTERNAL_SSC] = &usb_sgmii_xcvr_diag_ln_vals,
+ },
+ },
+ },
+ .pcs_cmn_vals = {
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &usb_phy_pcs_cmn_vals,
+ [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &usb_phy_pcs_cmn_vals,
+ [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_phy_pcs_cmn_vals,
+ [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_phy_pcs_cmn_vals,
+ [EXTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ [INTERNAL_SSC] = &usb_phy_pcs_cmn_vals,
+ },
+ },
+ },
+ .cmn_vals = {
+ [TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sl_pcie_100_int_ssc_cmn_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &pcie_100_int_ssc_cmn_vals,
+ },
+ },
+ [TYPE_SGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sgmii_100_int_ssc_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sgmii_100_no_ssc_cmn_vals,
+ },
+ },
+ [TYPE_QSGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &qsgmii_100_int_ssc_cmn_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &qsgmii_100_no_ssc_cmn_vals,
+ },
+ },
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &usb_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &usb_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &usb_100_int_ssc_cmn_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_cmn_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_cmn_vals,
+ [INTERNAL_SSC] = &sl_usb_100_int_ssc_cmn_vals,
+ },
+ },
+ },
+ .tx_ln_vals = {
+ [TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = NULL,
+ [EXTERNAL_SSC] = NULL,
+ [INTERNAL_SSC] = NULL,
+ },
+ },
+ [TYPE_SGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &sgmii_100_no_ssc_tx_ln_vals,
+ },
+ },
+ [TYPE_QSGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &qsgmii_100_no_ssc_tx_ln_vals,
+ },
+ },
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_tx_ln_vals,
+ },
+ },
+ },
+ .rx_ln_vals = {
+ [TYPE_PCIE] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &pcie_100_no_ssc_rx_ln_vals,
+ },
+ },
+ [TYPE_SGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &sgmii_100_no_ssc_rx_ln_vals,
+ },
+ },
+ [TYPE_QSGMII] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_USB] = {
+ [NO_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &qsgmii_100_no_ssc_rx_ln_vals,
+ },
+ },
+ [TYPE_USB] = {
+ [TYPE_NONE] = {
+ [NO_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_PCIE] = {
+ [NO_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_SGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ },
+ [TYPE_QSGMII] = {
+ [NO_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [EXTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ [INTERNAL_SSC] = &usb_100_no_ssc_rx_ln_vals,
+ },
+ },
+ },
};
static const struct of_device_id cdns_torrent_phy_of_match[] = {
diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
index 0c4833da7be0..62d6d6849ad6 100644
--- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -1,15 +1,20 @@
// SPDX-License-Identifier: GPL-2.0+
/* Copyright (c) 2017 NXP. */
+#include <linux/bitfield.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#define PHY_CTRL0 0x0
#define PHY_CTRL0_REF_SSP_EN BIT(2)
+#define PHY_CTRL0_FSEL_MASK GENMASK(10, 5)
+#define PHY_CTRL0_FSEL_24M 0x2a
#define PHY_CTRL1 0x4
#define PHY_CTRL1_RESET BIT(0)
@@ -20,6 +25,11 @@
#define PHY_CTRL2 0x8
#define PHY_CTRL2_TXENABLEN0 BIT(8)
+#define PHY_CTRL2_OTG_DISABLE BIT(9)
+
+#define PHY_CTRL6 0x18
+#define PHY_CTRL6_ALT_CLK_EN BIT(1)
+#define PHY_CTRL6_ALT_CLK_SEL BIT(0)
struct imx8mq_usb_phy {
struct phy *phy;
@@ -54,6 +64,44 @@ static int imx8mq_usb_phy_init(struct phy *phy)
return 0;
}
+static int imx8mp_usb_phy_init(struct phy *phy)
+{
+ struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+ u32 value;
+
+ /* USB3.0 PHY signal fsel for 24M ref */
+ value = readl(imx_phy->base + PHY_CTRL0);
+ value &= ~PHY_CTRL0_FSEL_MASK;
+ value |= FIELD_PREP(PHY_CTRL0_FSEL_MASK, PHY_CTRL0_FSEL_24M);
+ writel(value, imx_phy->base + PHY_CTRL0);
+
+ /* Disable alt_clk_en and use internal MPLL clocks */
+ value = readl(imx_phy->base + PHY_CTRL6);
+ value &= ~(PHY_CTRL6_ALT_CLK_SEL | PHY_CTRL6_ALT_CLK_EN);
+ writel(value, imx_phy->base + PHY_CTRL6);
+
+ value = readl(imx_phy->base + PHY_CTRL1);
+ value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0);
+ value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET;
+ writel(value, imx_phy->base + PHY_CTRL1);
+
+ value = readl(imx_phy->base + PHY_CTRL0);
+ value |= PHY_CTRL0_REF_SSP_EN;
+ writel(value, imx_phy->base + PHY_CTRL0);
+
+ value = readl(imx_phy->base + PHY_CTRL2);
+ value |= PHY_CTRL2_TXENABLEN0 | PHY_CTRL2_OTG_DISABLE;
+ writel(value, imx_phy->base + PHY_CTRL2);
+
+ udelay(10);
+
+ value = readl(imx_phy->base + PHY_CTRL1);
+ value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET);
+ writel(value, imx_phy->base + PHY_CTRL1);
+
+ return 0;
+}
+
static int imx8mq_phy_power_on(struct phy *phy)
{
struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
@@ -76,19 +124,36 @@ static int imx8mq_phy_power_off(struct phy *phy)
return 0;
}
-static struct phy_ops imx8mq_usb_phy_ops = {
+static const struct phy_ops imx8mq_usb_phy_ops = {
.init = imx8mq_usb_phy_init,
.power_on = imx8mq_phy_power_on,
.power_off = imx8mq_phy_power_off,
.owner = THIS_MODULE,
};
+static struct phy_ops imx8mp_usb_phy_ops = {
+ .init = imx8mp_usb_phy_init,
+ .power_on = imx8mq_phy_power_on,
+ .power_off = imx8mq_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id imx8mq_usb_phy_of_match[] = {
+ {.compatible = "fsl,imx8mq-usb-phy",
+ .data = &imx8mq_usb_phy_ops,},
+ {.compatible = "fsl,imx8mp-usb-phy",
+ .data = &imx8mp_usb_phy_ops,},
+ { }
+};
+MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
+
static int imx8mq_usb_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct device *dev = &pdev->dev;
struct imx8mq_usb_phy *imx_phy;
struct resource *res;
+ const struct phy_ops *phy_ops;
imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL);
if (!imx_phy)
@@ -105,7 +170,11 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
if (IS_ERR(imx_phy->base))
return PTR_ERR(imx_phy->base);
- imx_phy->phy = devm_phy_create(dev, NULL, &imx8mq_usb_phy_ops);
+ phy_ops = of_device_get_match_data(dev);
+ if (!phy_ops)
+ return -EINVAL;
+
+ imx_phy->phy = devm_phy_create(dev, NULL, phy_ops);
if (IS_ERR(imx_phy->phy))
return PTR_ERR(imx_phy->phy);
@@ -120,12 +189,6 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
return PTR_ERR_OR_ZERO(phy_provider);
}
-static const struct of_device_id imx8mq_usb_phy_of_match[] = {
- {.compatible = "fsl,imx8mq-usb-phy",},
- { },
-};
-MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
-
static struct platform_driver imx8mq_usb_phy_driver = {
.probe = imx8mq_usb_phy_probe,
.driver = {
diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c
index cc0af2c044d0..84adce9b4277 100644
--- a/drivers/phy/hisilicon/phy-hi3660-usb3.c
+++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c
@@ -161,7 +161,7 @@ out:
return ret;
}
-static struct phy_ops hi3660_phy_ops = {
+static const struct phy_ops hi3660_phy_ops = {
.init = hi3660_phy_init,
.exit = hi3660_phy_exit,
.owner = THIS_MODULE,
diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig
index 7b47682a4e0e..58ec695c92ec 100644
--- a/drivers/phy/intel/Kconfig
+++ b/drivers/phy/intel/Kconfig
@@ -1,9 +1,21 @@
# SPDX-License-Identifier: GPL-2.0
#
-# Phy drivers for Intel Lightning Mountain(LGM) platform
+# Phy drivers for Intel platforms
#
-config PHY_INTEL_COMBO
- bool "Intel ComboPHY driver"
+config PHY_INTEL_KEEMBAY_EMMC
+ tristate "Intel Keem Bay EMMC PHY driver"
+ depends on (OF && ARM64) || COMPILE_TEST
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ select REGMAP_MMIO
+ help
+ Choose this option if you have an Intel Keem Bay SoC.
+
+ To compile this driver as a module, choose M here: the module
+ will be called phy-keembay-emmc.ko.
+
+config PHY_INTEL_LGM_COMBO
+ bool "Intel Lightning Mountain ComboPHY driver"
depends on X86 || COMPILE_TEST
depends on OF && HAS_IOMEM
select MFD_SYSCON
@@ -16,8 +28,8 @@ config PHY_INTEL_COMBO
chipsets which provides PHYs for various controllers, EMAC,
SATA and PCIe.
-config PHY_INTEL_EMMC
- tristate "Intel EMMC PHY driver"
+config PHY_INTEL_LGM_EMMC
+ tristate "Intel Lightning Mountain EMMC PHY driver"
depends on X86 || COMPILE_TEST
select GENERIC_PHY
help
diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile
index 233d530dadde..a5e0af5ccd75 100644
--- a/drivers/phy/intel/Makefile
+++ b/drivers/phy/intel/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PHY_INTEL_COMBO) += phy-intel-combo.o
-obj-$(CONFIG_PHY_INTEL_EMMC) += phy-intel-emmc.o
+obj-$(CONFIG_PHY_INTEL_KEEMBAY_EMMC) += phy-intel-keembay-emmc.o
+obj-$(CONFIG_PHY_INTEL_LGM_COMBO) += phy-intel-lgm-combo.o
+obj-$(CONFIG_PHY_INTEL_LGM_EMMC) += phy-intel-lgm-emmc.o
diff --git a/drivers/phy/intel/phy-intel-keembay-emmc.c b/drivers/phy/intel/phy-intel-keembay-emmc.c
new file mode 100644
index 000000000000..eb7c635ed89a
--- /dev/null
+++ b/drivers/phy/intel/phy-intel-keembay-emmc.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Keem Bay eMMC PHY driver
+ * Copyright (C) 2020 Intel Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* eMMC/SD/SDIO core/phy configuration registers */
+#define PHY_CFG_0 0x24
+#define SEL_DLY_TXCLK_MASK BIT(29)
+#define OTAP_DLY_ENA_MASK BIT(27)
+#define OTAP_DLY_SEL_MASK GENMASK(26, 23)
+#define DLL_EN_MASK BIT(10)
+#define PWR_DOWN_MASK BIT(0)
+
+#define PHY_CFG_2 0x2c
+#define SEL_FREQ_MASK GENMASK(12, 10)
+
+#define PHY_STAT 0x40
+#define CAL_DONE_MASK BIT(6)
+#define IS_CALDONE(x) ((x) & CAL_DONE_MASK)
+#define DLL_RDY_MASK BIT(5)
+#define IS_DLLRDY(x) ((x) & DLL_RDY_MASK)
+
+/* From ACS_eMMC51_16nFFC_RO1100_Userguide_v1p0.pdf p17 */
+#define FREQSEL_200M_170M 0x0
+#define FREQSEL_170M_140M 0x1
+#define FREQSEL_140M_110M 0x2
+#define FREQSEL_110M_80M 0x3
+#define FREQSEL_80M_50M 0x4
+
+struct keembay_emmc_phy {
+ struct regmap *syscfg;
+ struct clk *emmcclk;
+};
+
+static const struct regmap_config keembay_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int keembay_emmc_phy_power(struct phy *phy, bool on_off)
+{
+ struct keembay_emmc_phy *priv = phy_get_drvdata(phy);
+ unsigned int caldone;
+ unsigned int dllrdy;
+ unsigned int freqsel;
+ unsigned int mhz;
+ int ret;
+
+ /*
+ * Keep phyctrl_pdb and phyctrl_endll low to allow
+ * initialization of CALIO state M/C DFFs
+ */
+ ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, PWR_DOWN_MASK,
+ FIELD_PREP(PWR_DOWN_MASK, 0));
+ if (ret) {
+ dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, DLL_EN_MASK,
+ FIELD_PREP(DLL_EN_MASK, 0));
+ if (ret) {
+ dev_err(&phy->dev, "turn off the dll failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Already finish power off above */
+ if (!on_off)
+ return 0;
+
+ mhz = DIV_ROUND_CLOSEST(clk_get_rate(priv->emmcclk), 1000000);
+ if (mhz <= 200 && mhz >= 170)
+ freqsel = FREQSEL_200M_170M;
+ else if (mhz <= 170 && mhz >= 140)
+ freqsel = FREQSEL_170M_140M;
+ else if (mhz <= 140 && mhz >= 110)
+ freqsel = FREQSEL_140M_110M;
+ else if (mhz <= 110 && mhz >= 80)
+ freqsel = FREQSEL_110M_80M;
+ else if (mhz <= 80 && mhz >= 50)
+ freqsel = FREQSEL_80M_50M;
+ else
+ freqsel = 0x0;
+
+ if (mhz < 50 || mhz > 200)
+ dev_warn(&phy->dev, "Unsupported rate: %d MHz\n", mhz);
+
+ /*
+ * According to the user manual, calpad calibration
+ * cycle takes more than 2us without the minimal recommended
+ * value, so we may need a little margin here
+ */
+ udelay(5);
+
+ ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, PWR_DOWN_MASK,
+ FIELD_PREP(PWR_DOWN_MASK, 1));
+ if (ret) {
+ dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * According to the user manual, it asks driver to wait 5us for
+ * calpad busy trimming. However it is documented that this value is
+ * PVT(A.K.A. process, voltage and temperature) relevant, so some
+ * failure cases are found which indicates we should be more tolerant
+ * to calpad busy trimming.
+ */
+ ret = regmap_read_poll_timeout(priv->syscfg, PHY_STAT,
+ caldone, IS_CALDONE(caldone),
+ 0, 50);
+ if (ret) {
+ dev_err(&phy->dev, "caldone failed, ret=%d\n", ret);
+ return ret;
+ }
+
+ /* Set the frequency of the DLL operation */
+ ret = regmap_update_bits(priv->syscfg, PHY_CFG_2, SEL_FREQ_MASK,
+ FIELD_PREP(SEL_FREQ_MASK, freqsel));
+ if (ret) {
+ dev_err(&phy->dev, "set the frequency of dll failed:%d\n", ret);
+ return ret;
+ }
+
+ /* Turn on the DLL */
+ ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, DLL_EN_MASK,
+ FIELD_PREP(DLL_EN_MASK, 1));
+ if (ret) {
+ dev_err(&phy->dev, "turn on the dll failed: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * We turned on the DLL even though the rate was 0 because we the
+ * clock might be turned on later. ...but we can't wait for the DLL
+ * to lock when the rate is 0 because it will never lock with no
+ * input clock.
+ *
+ * Technically we should be checking the lock later when the clock
+ * is turned on, but for now we won't.
+ */
+ if (mhz == 0)
+ return 0;
+
+ /*
+ * After enabling analog DLL circuits docs say that we need 10.2 us if
+ * our source clock is at 50 MHz and that lock time scales linearly
+ * with clock speed. If we are powering on the PHY and the card clock
+ * is super slow (like 100kHz) this could take as long as 5.1 ms as
+ * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
+ * hopefully we won't be running at 100 kHz, but we should still make
+ * sure we wait long enough.
+ *
+ * NOTE: There appear to be corner cases where the DLL seems to take
+ * extra long to lock for reasons that aren't understood. In some
+ * extreme cases we've seen it take up to over 10ms (!). We'll be
+ * generous and give it 50ms.
+ */
+ ret = regmap_read_poll_timeout(priv->syscfg, PHY_STAT,
+ dllrdy, IS_DLLRDY(dllrdy),
+ 0, 50 * USEC_PER_MSEC);
+ if (ret)
+ dev_err(&phy->dev, "dllrdy failed, ret=%d\n", ret);
+
+ return ret;
+}
+
+static int keembay_emmc_phy_init(struct phy *phy)
+{
+ struct keembay_emmc_phy *priv = phy_get_drvdata(phy);
+
+ /*
+ * We purposely get the clock here and not in probe to avoid the
+ * circular dependency problem. We expect:
+ * - PHY driver to probe
+ * - SDHCI driver to start probe
+ * - SDHCI driver to register it's clock
+ * - SDHCI driver to get the PHY
+ * - SDHCI driver to init the PHY
+ *
+ * The clock is optional, so upon any error just return it like
+ * any other error to user.
+ */
+ priv->emmcclk = clk_get_optional(&phy->dev, "emmcclk");
+
+ return PTR_ERR_OR_ZERO(priv->emmcclk);
+}
+
+static int keembay_emmc_phy_exit(struct phy *phy)
+{
+ struct keembay_emmc_phy *priv = phy_get_drvdata(phy);
+
+ clk_put(priv->emmcclk);
+
+ return 0;
+};
+
+static int keembay_emmc_phy_power_on(struct phy *phy)
+{
+ struct keembay_emmc_phy *priv = phy_get_drvdata(phy);
+ int ret;
+
+ /* Delay chain based txclk: enable */
+ ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
+ FIELD_PREP(SEL_DLY_TXCLK_MASK, 1));
+ if (ret) {
+ dev_err(&phy->dev, "ERROR: delay chain txclk set: %d\n", ret);
+ return ret;
+ }
+
+ /* Output tap delay: enable */
+ ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, OTAP_DLY_ENA_MASK,
+ FIELD_PREP(OTAP_DLY_ENA_MASK, 1));
+ if (ret) {
+ dev_err(&phy->dev, "ERROR: output tap delay set: %d\n", ret);
+ return ret;
+ }
+
+ /* Output tap delay */
+ ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, OTAP_DLY_SEL_MASK,
+ FIELD_PREP(OTAP_DLY_SEL_MASK, 2));
+ if (ret) {
+ dev_err(&phy->dev, "ERROR: output tap delay select: %d\n", ret);
+ return ret;
+ }
+
+ /* Power up eMMC phy analog blocks */
+ return keembay_emmc_phy_power(phy, true);
+}
+
+static int keembay_emmc_phy_power_off(struct phy *phy)
+{
+ /* Power down eMMC phy analog blocks */
+ return keembay_emmc_phy_power(phy, false);
+}
+
+static const struct phy_ops ops = {
+ .init = keembay_emmc_phy_init,
+ .exit = keembay_emmc_phy_exit,
+ .power_on = keembay_emmc_phy_power_on,
+ .power_off = keembay_emmc_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int keembay_emmc_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct keembay_emmc_phy *priv;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ void __iomem *base;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ priv->syscfg = devm_regmap_init_mmio(dev, base, &keembay_regmap_config);
+ if (IS_ERR(priv->syscfg))
+ return PTR_ERR(priv->syscfg);
+
+ generic_phy = devm_phy_create(dev, np, &ops);
+ if (IS_ERR(generic_phy))
+ return dev_err_probe(dev, PTR_ERR(generic_phy),
+ "failed to create PHY\n");
+
+ phy_set_drvdata(generic_phy, priv);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id keembay_emmc_phy_dt_ids[] = {
+ { .compatible = "intel,keembay-emmc-phy" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, keembay_emmc_phy_dt_ids);
+
+static struct platform_driver keembay_emmc_phy_driver = {
+ .probe = keembay_emmc_phy_probe,
+ .driver = {
+ .name = "keembay-emmc-phy",
+ .of_match_table = keembay_emmc_phy_dt_ids,
+ },
+};
+module_platform_driver(keembay_emmc_phy_driver);
+
+MODULE_AUTHOR("Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>");
+MODULE_DESCRIPTION("Intel Keem Bay eMMC PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/intel/phy-intel-combo.c b/drivers/phy/intel/phy-intel-lgm-combo.c
index 360b1eb2ebd6..360b1eb2ebd6 100644
--- a/drivers/phy/intel/phy-intel-combo.c
+++ b/drivers/phy/intel/phy-intel-lgm-combo.c
diff --git a/drivers/phy/intel/phy-intel-emmc.c b/drivers/phy/intel/phy-intel-lgm-emmc.c
index 703aeb122541..703aeb122541 100644
--- a/drivers/phy/intel/phy-intel-emmc.c
+++ b/drivers/phy/intel/phy-intel-lgm-emmc.c
diff --git a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
index be09b1530ae6..a7d126192cf1 100644
--- a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
+++ b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
@@ -141,7 +141,7 @@ static int ltq_rcu_usb2_phy_power_off(struct phy *phy)
return 0;
}
-static struct phy_ops ltq_rcu_usb2_phy_ops = {
+static const struct phy_ops ltq_rcu_usb2_phy_ops = {
.init = ltq_rcu_usb2_phy_init,
.power_on = ltq_rcu_usb2_phy_power_on,
.power_off = ltq_rcu_usb2_phy_power_off,
diff --git a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
index 2ff9a48d833e..22c5698123cf 100644
--- a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
+++ b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
@@ -349,7 +349,7 @@ static int ltq_vrx200_pcie_phy_power_off(struct phy *phy)
return 0;
}
-static struct phy_ops ltq_vrx200_pcie_phy_ops = {
+static const struct phy_ops ltq_vrx200_pcie_phy_ops = {
.init = ltq_vrx200_pcie_phy_init,
.exit = ltq_vrx200_pcie_phy_exit,
.power_on = ltq_vrx200_pcie_phy_power_on,
diff --git a/drivers/phy/marvell/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
index ae8370af59c0..31b43d2ee39a 100644
--- a/drivers/phy/marvell/phy-pxa-28nm-hsic.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/module.h>
@@ -44,15 +45,12 @@ struct mv_hsic_phy {
struct clk *clk;
};
-static bool wait_for_reg(void __iomem *reg, u32 mask, unsigned long timeout)
+static int wait_for_reg(void __iomem *reg, u32 mask, u32 ms)
{
- timeout += jiffies;
- while (time_is_after_eq_jiffies(timeout)) {
- if ((readl(reg) & mask) == mask)
- return true;
- msleep(1);
- }
- return false;
+ u32 val;
+
+ return readl_poll_timeout(reg, val, ((val & mask) == mask),
+ 1000, 1000 * ms);
}
static int mv_hsic_phy_init(struct phy *phy)
@@ -60,6 +58,7 @@ static int mv_hsic_phy_init(struct phy *phy)
struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy);
struct platform_device *pdev = mv_phy->pdev;
void __iomem *base = mv_phy->base;
+ int ret;
clk_prepare_enable(mv_phy->clk);
@@ -75,14 +74,14 @@ static int mv_hsic_phy_init(struct phy *phy)
base + PHY_28NM_HSIC_PLL_CTRL2);
/* Make sure PHY PLL is locked */
- if (!wait_for_reg(base + PHY_28NM_HSIC_PLL_CTRL2,
- PHY_28NM_HSIC_H2S_PLL_LOCK, HZ / 10)) {
+ ret = wait_for_reg(base + PHY_28NM_HSIC_PLL_CTRL2,
+ PHY_28NM_HSIC_H2S_PLL_LOCK, 100);
+ if (ret) {
dev_err(&pdev->dev, "HSIC PHY PLL not locked after 100mS.");
clk_disable_unprepare(mv_phy->clk);
- return -ETIMEDOUT;
}
- return 0;
+ return ret;
}
static int mv_hsic_phy_power_on(struct phy *phy)
@@ -91,6 +90,7 @@ static int mv_hsic_phy_power_on(struct phy *phy)
struct platform_device *pdev = mv_phy->pdev;
void __iomem *base = mv_phy->base;
u32 reg;
+ int ret;
reg = readl(base + PHY_28NM_HSIC_CTRL);
/* Avoid SE0 state when resume for some device will take it as reset */
@@ -108,20 +108,20 @@ static int mv_hsic_phy_power_on(struct phy *phy)
*/
/* Make sure PHY Calibration is ready */
- if (!wait_for_reg(base + PHY_28NM_HSIC_IMPCAL_CAL,
- PHY_28NM_HSIC_H2S_IMPCAL_DONE, HZ / 10)) {
+ ret = wait_for_reg(base + PHY_28NM_HSIC_IMPCAL_CAL,
+ PHY_28NM_HSIC_H2S_IMPCAL_DONE, 100);
+ if (ret) {
dev_warn(&pdev->dev, "HSIC PHY READY not set after 100mS.");
- return -ETIMEDOUT;
+ return ret;
}
/* Waiting for HSIC connect int*/
- if (!wait_for_reg(base + PHY_28NM_HSIC_INT,
- PHY_28NM_HSIC_CONNECT_INT, HZ / 5)) {
+ ret = wait_for_reg(base + PHY_28NM_HSIC_INT,
+ PHY_28NM_HSIC_CONNECT_INT, 200);
+ if (ret)
dev_warn(&pdev->dev, "HSIC wait for connect interrupt timeout.");
- return -ETIMEDOUT;
- }
- return 0;
+ return ret;
}
static int mv_hsic_phy_power_off(struct phy *phy)
diff --git a/drivers/phy/marvell/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
index 9fd881787fa6..a175ae915f02 100644
--- a/drivers/phy/marvell/phy-pxa-28nm-usb2.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
@@ -13,6 +13,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/module.h>
@@ -138,15 +139,12 @@ struct mv_usb2_phy {
struct clk *clk;
};
-static bool wait_for_reg(void __iomem *reg, u32 mask, unsigned long timeout)
+static int wait_for_reg(void __iomem *reg, u32 mask, u32 ms)
{
- timeout += jiffies;
- while (time_is_after_eq_jiffies(timeout)) {
- if ((readl(reg) & mask) == mask)
- return true;
- msleep(1);
- }
- return false;
+ u32 val;
+
+ return readl_poll_timeout(reg, val, ((val & mask) == mask),
+ 1000, 1000 * ms);
}
static int mv_usb2_phy_28nm_init(struct phy *phy)
@@ -208,24 +206,23 @@ static int mv_usb2_phy_28nm_init(struct phy *phy)
*/
/* Make sure PHY Calibration is ready */
- if (!wait_for_reg(base + PHY_28NM_CAL_REG,
- PHY_28NM_PLL_PLLCAL_DONE | PHY_28NM_PLL_IMPCAL_DONE,
- HZ / 10)) {
+ ret = wait_for_reg(base + PHY_28NM_CAL_REG,
+ PHY_28NM_PLL_PLLCAL_DONE | PHY_28NM_PLL_IMPCAL_DONE,
+ 100);
+ if (ret) {
dev_warn(&pdev->dev, "USB PHY PLL calibrate not done after 100mS.");
- ret = -ETIMEDOUT;
goto err_clk;
}
- if (!wait_for_reg(base + PHY_28NM_RX_REG1,
- PHY_28NM_RX_SQCAL_DONE, HZ / 10)) {
+ ret = wait_for_reg(base + PHY_28NM_RX_REG1,
+ PHY_28NM_RX_SQCAL_DONE, 100);
+ if (ret) {
dev_warn(&pdev->dev, "USB PHY RX SQ calibrate not done after 100mS.");
- ret = -ETIMEDOUT;
goto err_clk;
}
/* Make sure PHY PLL is ready */
- if (!wait_for_reg(base + PHY_28NM_PLL_REG0,
- PHY_28NM_PLL_READY, HZ / 10)) {
+ ret = wait_for_reg(base + PHY_28NM_PLL_REG0, PHY_28NM_PLL_READY, 100);
+ if (ret) {
dev_warn(&pdev->dev, "PLL_READY not set after 100mS.");
- ret = -ETIMEDOUT;
goto err_clk;
}
diff --git a/drivers/phy/phy-lgm-usb.c b/drivers/phy/phy-lgm-usb.c
new file mode 100644
index 000000000000..309c8f0e0724
--- /dev/null
+++ b/drivers/phy/phy-lgm-usb.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel LGM USB PHY driver
+ *
+ * Copyright (C) 2020 Intel Corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/usb/phy.h>
+#include <linux/workqueue.h>
+
+#define CTRL1_OFFSET 0x14
+#define SRAM_EXT_LD_DONE BIT(25)
+#define SRAM_INIT_DONE BIT(26)
+
+#define TCPC_OFFSET 0x1014
+#define TCPC_MUX_CTL GENMASK(1, 0)
+#define MUX_NC 0
+#define MUX_USB 1
+#define MUX_DP 2
+#define MUX_USBDP 3
+#define TCPC_FLIPPED BIT(2)
+#define TCPC_LOW_POWER_EN BIT(3)
+#define TCPC_VALID BIT(4)
+#define TCPC_CONN \
+ (TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_USB))
+#define TCPC_DISCONN \
+ (TCPC_VALID | FIELD_PREP(TCPC_MUX_CTL, MUX_NC) | TCPC_LOW_POWER_EN)
+
+static const char *const PHY_RESETS[] = { "phy31", "phy", };
+static const char *const CTL_RESETS[] = { "apb", "ctrl", };
+
+struct tca_apb {
+ struct reset_control *resets[ARRAY_SIZE(PHY_RESETS)];
+ struct regulator *vbus;
+ struct work_struct wk;
+ struct usb_phy phy;
+
+ bool regulator_enabled;
+ bool phy_initialized;
+ bool connected;
+};
+
+static int get_flipped(struct tca_apb *ta, bool *flipped)
+{
+ union extcon_property_value property;
+ int ret;
+
+ ret = extcon_get_property(ta->phy.edev, EXTCON_USB_HOST,
+ EXTCON_PROP_USB_TYPEC_POLARITY, &property);
+ if (ret) {
+ dev_err(ta->phy.dev, "no polarity property from extcon\n");
+ return ret;
+ }
+
+ *flipped = property.intval;
+
+ return 0;
+}
+
+static int phy_init(struct usb_phy *phy)
+{
+ struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
+ void __iomem *ctrl1 = phy->io_priv + CTRL1_OFFSET;
+ int val, ret, i;
+
+ if (ta->phy_initialized)
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
+ reset_control_deassert(ta->resets[i]);
+
+ ret = readl_poll_timeout(ctrl1, val, val & SRAM_INIT_DONE, 10, 10 * 1000);
+ if (ret) {
+ dev_err(ta->phy.dev, "SRAM init failed, 0x%x\n", val);
+ return ret;
+ }
+
+ writel(readl(ctrl1) | SRAM_EXT_LD_DONE, ctrl1);
+
+ ta->phy_initialized = true;
+ if (!ta->phy.edev) {
+ writel(TCPC_CONN, ta->phy.io_priv + TCPC_OFFSET);
+ return phy->set_vbus(phy, true);
+ }
+
+ schedule_work(&ta->wk);
+
+ return ret;
+}
+
+static void phy_shutdown(struct usb_phy *phy)
+{
+ struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
+ int i;
+
+ if (!ta->phy_initialized)
+ return;
+
+ ta->phy_initialized = false;
+ flush_work(&ta->wk);
+ ta->phy.set_vbus(&ta->phy, false);
+
+ ta->connected = false;
+ writel(TCPC_DISCONN, ta->phy.io_priv + TCPC_OFFSET);
+
+ for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
+ reset_control_assert(ta->resets[i]);
+}
+
+static int phy_set_vbus(struct usb_phy *phy, int on)
+{
+ struct tca_apb *ta = container_of(phy, struct tca_apb, phy);
+ int ret;
+
+ if (!!on == ta->regulator_enabled)
+ return 0;
+
+ if (on)
+ ret = regulator_enable(ta->vbus);
+ else
+ ret = regulator_disable(ta->vbus);
+
+ if (!ret)
+ ta->regulator_enabled = on;
+
+ dev_dbg(ta->phy.dev, "set vbus: %d\n", on);
+ return ret;
+}
+
+static void tca_work(struct work_struct *work)
+{
+ struct tca_apb *ta = container_of(work, struct tca_apb, wk);
+ bool connected;
+ bool flipped = false;
+ u32 val;
+ int ret;
+
+ ret = get_flipped(ta, &flipped);
+ if (ret)
+ return;
+
+ connected = extcon_get_state(ta->phy.edev, EXTCON_USB_HOST);
+ if (connected == ta->connected)
+ return;
+
+ ta->connected = connected;
+ if (connected) {
+ val = TCPC_CONN;
+ if (flipped)
+ val |= TCPC_FLIPPED;
+ dev_dbg(ta->phy.dev, "connected%s\n", flipped ? " flipped" : "");
+ } else {
+ val = TCPC_DISCONN;
+ dev_dbg(ta->phy.dev, "disconnected\n");
+ }
+
+ writel(val, ta->phy.io_priv + TCPC_OFFSET);
+
+ ret = ta->phy.set_vbus(&ta->phy, connected);
+ if (ret)
+ dev_err(ta->phy.dev, "failed to set VBUS\n");
+}
+
+static int id_notifier(struct notifier_block *nb, unsigned long event, void *ptr)
+{
+ struct tca_apb *ta = container_of(nb, struct tca_apb, phy.id_nb);
+
+ if (ta->phy_initialized)
+ schedule_work(&ta->wk);
+
+ return NOTIFY_DONE;
+}
+
+static int vbus_notifier(struct notifier_block *nb, unsigned long evnt, void *ptr)
+{
+ return NOTIFY_DONE;
+}
+
+static int phy_probe(struct platform_device *pdev)
+{
+ struct reset_control *resets[ARRAY_SIZE(CTL_RESETS)];
+ struct device *dev = &pdev->dev;
+ struct usb_phy *phy;
+ struct tca_apb *ta;
+ int i;
+
+ ta = devm_kzalloc(dev, sizeof(*ta), GFP_KERNEL);
+ if (!ta)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ta);
+ INIT_WORK(&ta->wk, tca_work);
+
+ phy = &ta->phy;
+ phy->dev = dev;
+ phy->label = dev_name(dev);
+ phy->type = USB_PHY_TYPE_USB3;
+ phy->init = phy_init;
+ phy->shutdown = phy_shutdown;
+ phy->set_vbus = phy_set_vbus;
+ phy->id_nb.notifier_call = id_notifier;
+ phy->vbus_nb.notifier_call = vbus_notifier;
+
+ phy->io_priv = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(phy->io_priv))
+ return PTR_ERR(phy->io_priv);
+
+ ta->vbus = devm_regulator_get(dev, "vbus");
+ if (IS_ERR(ta->vbus))
+ return PTR_ERR(ta->vbus);
+
+ for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++) {
+ resets[i] = devm_reset_control_get_exclusive(dev, CTL_RESETS[i]);
+ if (IS_ERR(resets[i])) {
+ dev_err(dev, "%s reset not found\n", CTL_RESETS[i]);
+ return PTR_ERR(resets[i]);
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++) {
+ ta->resets[i] = devm_reset_control_get_exclusive(dev, PHY_RESETS[i]);
+ if (IS_ERR(ta->resets[i])) {
+ dev_err(dev, "%s reset not found\n", PHY_RESETS[i]);
+ return PTR_ERR(ta->resets[i]);
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++)
+ reset_control_assert(resets[i]);
+
+ for (i = 0; i < ARRAY_SIZE(PHY_RESETS); i++)
+ reset_control_assert(ta->resets[i]);
+ /*
+ * Out-of-band reset of the controller after PHY reset will cause
+ * controller malfunctioning, so we should use in-band controller
+ * reset only and leave the controller de-asserted here.
+ */
+ for (i = 0; i < ARRAY_SIZE(CTL_RESETS); i++)
+ reset_control_deassert(resets[i]);
+
+ /* Need to wait at least 20us after de-assert the controller */
+ usleep_range(20, 100);
+
+ return usb_add_phy_dev(phy);
+}
+
+static int phy_remove(struct platform_device *pdev)
+{
+ struct tca_apb *ta = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&ta->phy);
+
+ return 0;
+}
+
+static const struct of_device_id intel_usb_phy_dt_ids[] = {
+ { .compatible = "intel,lgm-usb-phy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, intel_usb_phy_dt_ids);
+
+static struct platform_driver lgm_phy_driver = {
+ .driver = {
+ .name = "lgm-usb-phy",
+ .of_match_table = intel_usb_phy_dt_ids,
+ },
+ .probe = phy_probe,
+ .remove = phy_remove,
+};
+
+module_platform_driver(lgm_phy_driver);
+
+MODULE_DESCRIPTION("Intel LGM USB PHY driver");
+MODULE_AUTHOR("Li Yin <yin1.li@intel.com>");
+MODULE_AUTHOR("Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
index febe0aef68d4..ce91ae7f8dbd 100644
--- a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
@@ -4,6 +4,7 @@
*/
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -72,18 +73,12 @@ struct qcom_apq8064_sata_phy {
};
/* Helper function to do poll and timeout */
-static int read_poll_timeout(void __iomem *addr, u32 mask)
+static int poll_timeout(void __iomem *addr, u32 mask)
{
- unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
+ u32 val;
- do {
- if (readl_relaxed(addr) & mask)
- return 0;
-
- usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
- } while (!time_after(jiffies, timeout));
-
- return (readl_relaxed(addr) & mask) ? 0 : -ETIMEDOUT;
+ return readl_relaxed_poll_timeout(addr, val, (val & mask),
+ DELAY_INTERVAL_US, TIMEOUT_MS * 1000);
}
static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
@@ -137,21 +132,21 @@ static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2);
/* PLL Lock wait */
- ret = read_poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
+ ret = poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
if (ret) {
dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n");
return ret;
}
/* TX Calibration */
- ret = read_poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
+ ret = poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
if (ret) {
dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n");
return ret;
}
/* RX Calibration */
- ret = read_poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
+ ret = poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
if (ret) {
dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n");
return ret;
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
index b8ef331e1545..fc7f9df80a7b 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
@@ -48,7 +48,7 @@ static int ipq4019_ss_phy_power_on(struct phy *_phy)
return 0;
}
-static struct phy_ops ipq4019_usb_ss_phy_ops = {
+static const struct phy_ops ipq4019_usb_ss_phy_ops = {
.power_on = ipq4019_ss_phy_power_on,
.power_off = ipq4019_ss_phy_power_off,
};
@@ -80,7 +80,7 @@ static int ipq4019_hs_phy_power_on(struct phy *_phy)
return 0;
}
-static struct phy_ops ipq4019_usb_hs_phy_ops = {
+static const struct phy_ops ipq4019_usb_hs_phy_ops = {
.power_on = ipq4019_hs_phy_power_on,
.power_off = ipq4019_hs_phy_power_off,
};
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 6e6f992a9524..5d33ad4d06f2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -946,6 +946,88 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
};
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_rbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x6f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr2[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x8c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_serdes_tbl_hbr3[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x69),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x2a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x08),
+};
+
+static const struct qmp_phy_init_tbl qmp_v3_dp_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRANSCEIVER_BIAS_EN, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_VMODE_CTRL1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_INTERFACE_SELECT, 0x3d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_CLKBUF_ENABLE, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RESET_TSYNC_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TRAN_DRVR_EMP_EN, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_INTERFACE_MODE, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_BAND, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_POL_INV, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_DRV_LVL, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_TX_EMP_POST1_LVL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07),
+};
+
static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
@@ -1761,6 +1843,16 @@ struct qmp_phy_cfg {
const struct qmp_phy_init_tbl *pcs_misc_tbl;
int pcs_misc_tbl_num;
+ /* Init sequence for DP PHY block link rates */
+ const struct qmp_phy_init_tbl *serdes_tbl_rbr;
+ int serdes_tbl_rbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr;
+ int serdes_tbl_hbr_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr2;
+ int serdes_tbl_hbr2_num;
+ const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
+ int serdes_tbl_hbr3_num;
+
/* clock ids to be requested */
const char * const *clk_list;
int num_clks;
@@ -1797,10 +1889,17 @@ struct qmp_phy_cfg {
bool no_pcs_sw_reset;
};
+struct qmp_phy_combo_cfg {
+ const struct qmp_phy_cfg *usb_cfg;
+ const struct qmp_phy_cfg *dp_cfg;
+};
+
/**
* struct qmp_phy - per-lane phy descriptor
*
* @phy: generic phy
+ * @cfg: phy specific configuration
+ * @serdes: iomapped memory space for phy's serdes (i.e. PLL)
* @tx: iomapped memory space for lane's tx
* @rx: iomapped memory space for lane's rx
* @pcs: iomapped memory space for lane's pcs
@@ -1811,9 +1910,12 @@ struct qmp_phy_cfg {
* @index: lane index
* @qmp: QMP phy to which this lane belongs
* @lane_rst: lane's reset controller
+ * @mode: current PHY mode
*/
struct qmp_phy {
struct phy *phy;
+ const struct qmp_phy_cfg *cfg;
+ void __iomem *serdes;
void __iomem *tx;
void __iomem *rx;
void __iomem *pcs;
@@ -1824,43 +1926,45 @@ struct qmp_phy {
unsigned int index;
struct qcom_qmp *qmp;
struct reset_control *lane_rst;
+ enum phy_mode mode;
+ unsigned int dp_aux_cfg;
+ struct phy_configure_opts_dp dp_opts;
+ struct qmp_phy_dp_clks *dp_clks;
+};
+
+struct qmp_phy_dp_clks {
+ struct qmp_phy *qphy;
+ struct clk_hw dp_link_hw;
+ struct clk_hw dp_pixel_hw;
};
/**
* struct qcom_qmp - structure holding QMP phy block attributes
*
* @dev: device
- * @serdes: iomapped memory space for phy's serdes
* @dp_com: iomapped memory space for phy's dp_com control block
*
* @clks: array of clocks required by phy
* @resets: array of resets required by phy
* @vregs: regulator supplies bulk data
*
- * @cfg: phy specific configuration
* @phys: array of per-lane phy descriptors
* @phy_mutex: mutex lock for PHY common block initialization
* @init_count: phy common block initialization count
- * @phy_initialized: indicate if PHY has been initialized
- * @mode: current PHY mode
* @ufs_reset: optional UFS PHY reset handle
*/
struct qcom_qmp {
struct device *dev;
- void __iomem *serdes;
void __iomem *dp_com;
struct clk_bulk_data *clks;
struct reset_control **resets;
struct regulator_bulk_data *vregs;
- const struct qmp_phy_cfg *cfg;
struct qmp_phy **phys;
struct mutex phy_mutex;
int init_count;
- bool phy_initialized;
- enum phy_mode mode;
struct reset_control *ufs_reset;
};
@@ -2203,6 +2307,41 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
.is_dual_lane_phy = true,
};
+static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
+ .type = PHY_TYPE_DP,
+ .nlanes = 1,
+
+ .serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .tx_tbl = qmp_v3_dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3),
+
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
+ .usb_cfg = &sc7180_usb3phy_cfg,
+ .dp_cfg = &sc7180_dpphy_cfg,
+};
+
static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
@@ -2479,11 +2618,300 @@ static void qcom_qmp_phy_configure(void __iomem *base,
qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
}
+static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
+{
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
+ int serdes_tbl_num = cfg->serdes_tbl_num;
+ int ret;
+
+ qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
+
+ if (cfg->type == PHY_TYPE_DP) {
+ switch (dp_opts->link_rate) {
+ case 1620:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_rbr,
+ cfg->serdes_tbl_rbr_num);
+ break;
+ case 2700:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr,
+ cfg->serdes_tbl_hbr_num);
+ break;
+ case 5400:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr2,
+ cfg->serdes_tbl_hbr2_num);
+ break;
+ case 8100:
+ qcom_qmp_phy_configure(serdes, cfg->regs,
+ cfg->serdes_tbl_hbr3,
+ cfg->serdes_tbl_hbr3_num);
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ }
+
+
+ if (cfg->has_phy_com_ctrl) {
+ void __iomem *status;
+ unsigned int mask, val;
+
+ qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
+ qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
+ SERDES_START | PCS_START);
+
+ status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
+ mask = cfg->mask_com_pcs_ready;
+
+ ret = readl_poll_timeout(status, val, (val & mask), 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev,
+ "phy common block init timed-out\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy)
+{
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
+
+ /* Turn on BIAS current for PHY/PLL */
+ writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN |
+ DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
+ DP_PHY_PD_CTL_DP_CLAMP_EN,
+ qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
+
+ writel(QSERDES_V3_COM_BIAS_EN |
+ QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
+ QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
+ QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
+ qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
+
+ writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG0);
+ writel(0x13, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1);
+ writel(0x24, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2);
+ writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG3);
+ writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG4);
+ writel(0x26, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG5);
+ writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG6);
+ writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG7);
+ writel(0xbb, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG8);
+ writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG9);
+ qphy->dp_aux_cfg = 0;
+
+ writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+ PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+ PHY_AUX_REQ_ERR_MASK,
+ qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
+}
+
+static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
+ { 0x00, 0x0c, 0x14, 0x19 },
+ { 0x00, 0x0b, 0x12, 0xff },
+ { 0x00, 0x0b, 0xff, 0xff },
+ { 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
+ { 0x08, 0x0f, 0x16, 0x1f },
+ { 0x11, 0x1e, 0x1f, 0xff },
+ { 0x19, 0x1f, 0xff, 0xff },
+ { 0x1f, 0xff, 0xff, 0xff }
+};
+
+static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy)
+{
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ unsigned int v_level = 0, p_level = 0;
+ u32 bias_en, drvr_en;
+ u8 voltage_swing_cfg, pre_emphasis_cfg;
+ int i;
+
+ for (i = 0; i < dp_opts->lanes; i++) {
+ v_level = max(v_level, dp_opts->voltage[i]);
+ p_level = max(p_level, dp_opts->pre[i]);
+ }
+
+ if (dp_opts->lanes == 1) {
+ bias_en = 0x3e;
+ drvr_en = 0x13;
+ } else {
+ bias_en = 0x3f;
+ drvr_en = 0x10;
+ }
+
+ voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
+ pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
+
+ /* TODO: Move check to config check */
+ if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
+ return;
+
+ /* Enable MUX to use Cursor values from these registers */
+ voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
+ pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
+
+ writel(voltage_swing_cfg, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL);
+ writel(pre_emphasis_cfg, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL);
+ writel(voltage_swing_cfg, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL);
+ writel(pre_emphasis_cfg, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL);
+
+ writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+ writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
+ writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
+}
+
+static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ const struct phy_configure_opts_dp *dp_opts = &opts->dp;
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+ memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
+ if (qphy->dp_opts.set_voltages) {
+ qcom_qmp_phy_configure_dp_tx(qphy);
+ qphy->dp_opts.set_voltages = 0;
+ }
+
+ return 0;
+}
+
+static int qcom_qmp_phy_configure_dp_phy(struct qmp_phy *qphy)
+{
+ const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
+ const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
+ u32 val, phy_vco_div, status;
+ unsigned long pixel_freq;
+
+ val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
+
+ /*
+ * TODO: Assume orientation is CC1 for now and two lanes, need to
+ * use type-c connector to understand orientation and lanes.
+ *
+ * Otherwise val changes to be like below if this code understood
+ * the orientation of the type-c cable.
+ *
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
+ * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
+ * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
+ * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ * if (orientation == ORIENTATION_CC2)
+ * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
+ */
+ val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
+ writel(val, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
+
+ writel(0x5c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ phy_vco_div = 0x1;
+ pixel_freq = 1620000000UL / 2;
+ break;
+ case 2700:
+ phy_vco_div = 0x1;
+ pixel_freq = 2700000000UL / 2;
+ break;
+ case 5400:
+ phy_vco_div = 0x2;
+ pixel_freq = 5400000000UL / 4;
+ break;
+ case 8100:
+ phy_vco_div = 0x0;
+ pixel_freq = 8100000000UL / 6;
+ break;
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+ writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
+
+ clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
+ clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
+
+ writel(0x04, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2);
+ writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
+ writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
+ writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
+ writel(0x09, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
+
+ writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
+
+ if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
+ status,
+ ((status & BIT(0)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
+
+ if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000))
+ return -ETIMEDOUT;
+
+ writel(0x18, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
+ udelay(2000);
+ writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
+
+ return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
+ status,
+ ((status & BIT(1)) > 0),
+ 500,
+ 10000);
+}
+
+/*
+ * We need to calibrate the aux setting here as many times
+ * as the caller tries
+ */
+static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
+ u8 val;
+
+ qphy->dp_aux_cfg++;
+ qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
+ val = cfg1_settings[qphy->dp_aux_cfg];
+
+ writel(val, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1);
+
+ return 0;
+}
+
static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
{
struct qcom_qmp *qmp = qphy->qmp;
- const struct qmp_phy_cfg *cfg = qmp->cfg;
- void __iomem *serdes = qmp->serdes;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
void __iomem *pcs = qphy->pcs;
void __iomem *dp_com = qmp->dp_com;
int ret, i;
@@ -2514,7 +2942,7 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
ret = reset_control_deassert(qmp->resets[i]);
if (ret) {
dev_err(qmp->dev, "%s reset deassert failed\n",
- qmp->cfg->reset_list[i]);
+ qphy->cfg->reset_list[i]);
goto err_rst;
}
}
@@ -2533,6 +2961,9 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+ /* Default type-c orientation, i.e CC1 */
+ qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02);
+
qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL,
USB3_MODE | DP_MODE);
@@ -2540,6 +2971,9 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
+ qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
}
if (cfg->has_phy_com_ctrl) {
@@ -2555,36 +2989,10 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
cfg->pwrdn_ctrl);
}
- /* Serdes configuration */
- qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl,
- cfg->serdes_tbl_num);
-
- if (cfg->has_phy_com_ctrl) {
- void __iomem *status;
- unsigned int mask, val;
-
- qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET);
- qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL],
- SERDES_START | PCS_START);
-
- status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS];
- mask = cfg->mask_com_pcs_ready;
-
- ret = readl_poll_timeout(status, val, (val & mask), 10,
- PHY_INIT_COMPLETE_TIMEOUT);
- if (ret) {
- dev_err(qmp->dev,
- "phy common block init timed-out\n");
- goto err_com_init;
- }
- }
-
mutex_unlock(&qmp->phy_mutex);
return 0;
-err_com_init:
- clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
err_rst:
while (++i < cfg->num_resets)
reset_control_assert(qmp->resets[i]);
@@ -2596,10 +3004,11 @@ err_reg_enable:
return ret;
}
-static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp)
+static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
{
- const struct qmp_phy_cfg *cfg = qmp->cfg;
- void __iomem *serdes = qmp->serdes;
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *serdes = qphy->serdes;
int i = cfg->num_resets;
mutex_lock(&qmp->phy_mutex);
@@ -2630,20 +3039,12 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp)
return 0;
}
-static int qcom_qmp_phy_enable(struct phy *phy)
+static int qcom_qmp_phy_init(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
struct qcom_qmp *qmp = qphy->qmp;
- const struct qmp_phy_cfg *cfg = qmp->cfg;
- void __iomem *tx = qphy->tx;
- void __iomem *rx = qphy->rx;
- void __iomem *pcs = qphy->pcs;
- void __iomem *pcs_misc = qphy->pcs_misc;
- void __iomem *dp_com = qmp->dp_com;
- void __iomem *status;
- unsigned int mask, val, ready;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
int ret;
-
dev_vdbg(qmp->dev, "Initializing QMP phy\n");
if (cfg->no_pcs_sw_reset) {
@@ -2670,13 +3071,34 @@ static int qcom_qmp_phy_enable(struct phy *phy)
ret = reset_control_assert(qmp->ufs_reset);
if (ret)
- goto err_lane_rst;
+ return ret;
}
ret = qcom_qmp_phy_com_init(qphy);
if (ret)
return ret;
+ if (cfg->type == PHY_TYPE_DP)
+ qcom_qmp_phy_dp_aux_init(qphy);
+
+ return 0;
+}
+
+static int qcom_qmp_phy_power_on(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ struct qcom_qmp *qmp = qphy->qmp;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+ void __iomem *tx = qphy->tx;
+ void __iomem *rx = qphy->rx;
+ void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_misc = qphy->pcs_misc;
+ void __iomem *status;
+ unsigned int mask, val, ready;
+ int ret;
+
+ qcom_qmp_phy_serdes_init(qphy);
+
if (cfg->has_lane_rst) {
ret = reset_control_deassert(qphy->lane_rst);
if (ret) {
@@ -2700,13 +3122,23 @@ static int qcom_qmp_phy_enable(struct phy *phy)
qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
cfg->tx_tbl, cfg->tx_tbl_num, 2);
+ /* Configure special DP tx tunings */
+ if (cfg->type == PHY_TYPE_DP)
+ qcom_qmp_phy_configure_dp_tx(qphy);
+
qcom_qmp_phy_configure_lane(rx, cfg->regs,
cfg->rx_tbl, cfg->rx_tbl_num, 1);
+
if (cfg->is_dual_lane_phy)
qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
cfg->rx_tbl, cfg->rx_tbl_num, 2);
- qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+ /* Configure link rate, swing, etc. */
+ if (cfg->type == PHY_TYPE_DP)
+ qcom_qmp_phy_configure_dp_phy(qphy);
+ else
+ qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+
ret = reset_control_deassert(qmp->ufs_reset);
if (ret)
goto err_lane_rst;
@@ -2724,102 +3156,129 @@ static int qcom_qmp_phy_enable(struct phy *phy)
if (cfg->has_pwrdn_delay)
usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
- /* Pull PHY out of reset state */
- if (!cfg->no_pcs_sw_reset)
- qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
-
- if (cfg->has_phy_dp_com_ctrl)
- qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
-
- /* start SerDes and Phy-Coding-Sublayer */
- qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
-
- if (cfg->type == PHY_TYPE_UFS) {
- status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
- mask = PCS_READY;
- ready = PCS_READY;
- } else {
- status = pcs + cfg->regs[QPHY_PCS_STATUS];
- mask = PHYSTATUS;
- ready = 0;
- }
+ if (cfg->type != PHY_TYPE_DP) {
+ /* Pull PHY out of reset state */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+ /* start SerDes and Phy-Coding-Sublayer */
+ qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+
+ if (cfg->type == PHY_TYPE_UFS) {
+ status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+ mask = PCS_READY;
+ ready = PCS_READY;
+ } else {
+ status = pcs + cfg->regs[QPHY_PCS_STATUS];
+ mask = PHYSTATUS;
+ ready = 0;
+ }
- ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
- PHY_INIT_COMPLETE_TIMEOUT);
- if (ret) {
- dev_err(qmp->dev, "phy initialization timed-out\n");
- goto err_pcs_ready;
+ ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
+ PHY_INIT_COMPLETE_TIMEOUT);
+ if (ret) {
+ dev_err(qmp->dev, "phy initialization timed-out\n");
+ goto err_pcs_ready;
+ }
}
- qmp->phy_initialized = true;
return 0;
err_pcs_ready:
- reset_control_assert(qmp->ufs_reset);
clk_disable_unprepare(qphy->pipe_clk);
err_clk_enable:
if (cfg->has_lane_rst)
reset_control_assert(qphy->lane_rst);
err_lane_rst:
- qcom_qmp_phy_com_exit(qmp);
-
return ret;
}
-static int qcom_qmp_phy_disable(struct phy *phy)
+static int qcom_qmp_phy_power_off(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
- struct qcom_qmp *qmp = qphy->qmp;
- const struct qmp_phy_cfg *cfg = qmp->cfg;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
clk_disable_unprepare(qphy->pipe_clk);
- /* PHY reset */
- if (!cfg->no_pcs_sw_reset)
- qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+ if (cfg->type == PHY_TYPE_DP) {
+ /* Assert DP PHY power down */
+ writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
+ } else {
+ /* PHY reset */
+ if (!cfg->no_pcs_sw_reset)
+ qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
- /* stop SerDes and Phy-Coding-Sublayer */
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
+ /* stop SerDes and Phy-Coding-Sublayer */
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
- /* Put PHY into POWER DOWN state: active low */
- if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
- qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
- cfg->pwrdn_ctrl);
- } else {
- qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
- cfg->pwrdn_ctrl);
+ /* Put PHY into POWER DOWN state: active low */
+ if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
+ qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+ cfg->pwrdn_ctrl);
+ } else {
+ qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL,
+ cfg->pwrdn_ctrl);
+ }
}
+ return 0;
+}
+
+static int qcom_qmp_phy_exit(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
+
if (cfg->has_lane_rst)
reset_control_assert(qphy->lane_rst);
- qcom_qmp_phy_com_exit(qmp);
-
- qmp->phy_initialized = false;
+ qcom_qmp_phy_com_exit(qphy);
return 0;
}
+static int qcom_qmp_phy_enable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_init(phy);
+ if (ret)
+ return ret;
+
+ ret = qcom_qmp_phy_power_on(phy);
+ if (ret)
+ qcom_qmp_phy_exit(phy);
+
+ return ret;
+}
+
+static int qcom_qmp_phy_disable(struct phy *phy)
+{
+ int ret;
+
+ ret = qcom_qmp_phy_power_off(phy);
+ if (ret)
+ return ret;
+ return qcom_qmp_phy_exit(phy);
+}
+
static int qcom_qmp_phy_set_mode(struct phy *phy,
enum phy_mode mode, int submode)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
- struct qcom_qmp *qmp = qphy->qmp;
- qmp->mode = mode;
+ qphy->mode = mode;
return 0;
}
static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
{
- struct qcom_qmp *qmp = qphy->qmp;
- const struct qmp_phy_cfg *cfg = qmp->cfg;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *pcs = qphy->pcs;
void __iomem *pcs_misc = qphy->pcs_misc;
u32 intr_mask;
- if (qmp->mode == PHY_MODE_USB_HOST_SS ||
- qmp->mode == PHY_MODE_USB_DEVICE_SS)
+ if (qphy->mode == PHY_MODE_USB_HOST_SS ||
+ qphy->mode == PHY_MODE_USB_DEVICE_SS)
intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
else
intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
@@ -2842,8 +3301,7 @@ static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy)
static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy)
{
- struct qcom_qmp *qmp = qphy->qmp;
- const struct qmp_phy_cfg *cfg = qmp->cfg;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *pcs = qphy->pcs;
void __iomem *pcs_misc = qphy->pcs_misc;
@@ -2863,15 +3321,15 @@ static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
struct qmp_phy *qphy = qmp->phys[0];
- const struct qmp_phy_cfg *cfg = qmp->cfg;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
- dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qmp->mode);
+ dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);
- /* Supported only for USB3 PHY */
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
if (cfg->type != PHY_TYPE_USB3)
return 0;
- if (!qmp->phy_initialized) {
+ if (!qmp->init_count) {
dev_vdbg(dev, "PHY not initialized, bailing out\n");
return 0;
}
@@ -2888,16 +3346,16 @@ static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
struct qmp_phy *qphy = qmp->phys[0];
- const struct qmp_phy_cfg *cfg = qmp->cfg;
+ const struct qmp_phy_cfg *cfg = qphy->cfg;
int ret = 0;
- dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qmp->mode);
+ dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);
- /* Supported only for USB3 PHY */
+ /* Supported only for USB3 PHY and luckily USB3 is the first phy */
if (cfg->type != PHY_TYPE_USB3)
return 0;
- if (!qmp->phy_initialized) {
+ if (!qmp->init_count) {
dev_vdbg(dev, "PHY not initialized, bailing out\n");
return 0;
}
@@ -2920,10 +3378,10 @@ static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
return 0;
}
-static int qcom_qmp_phy_vreg_init(struct device *dev)
+static int qcom_qmp_phy_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
- int num = qmp->cfg->num_vregs;
+ int num = cfg->num_vregs;
int i;
qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
@@ -2931,24 +3389,24 @@ static int qcom_qmp_phy_vreg_init(struct device *dev)
return -ENOMEM;
for (i = 0; i < num; i++)
- qmp->vregs[i].supply = qmp->cfg->vreg_list[i];
+ qmp->vregs[i].supply = cfg->vreg_list[i];
return devm_regulator_bulk_get(dev, num, qmp->vregs);
}
-static int qcom_qmp_phy_reset_init(struct device *dev)
+static int qcom_qmp_phy_reset_init(struct device *dev, const struct qmp_phy_cfg *cfg)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
int i;
- qmp->resets = devm_kcalloc(dev, qmp->cfg->num_resets,
+ qmp->resets = devm_kcalloc(dev, cfg->num_resets,
sizeof(*qmp->resets), GFP_KERNEL);
if (!qmp->resets)
return -ENOMEM;
- for (i = 0; i < qmp->cfg->num_resets; i++) {
+ for (i = 0; i < cfg->num_resets; i++) {
struct reset_control *rst;
- const char *name = qmp->cfg->reset_list[i];
+ const char *name = cfg->reset_list[i];
rst = devm_reset_control_get(dev, name);
if (IS_ERR(rst)) {
@@ -2961,10 +3419,10 @@ static int qcom_qmp_phy_reset_init(struct device *dev)
return 0;
}
-static int qcom_qmp_phy_clk_init(struct device *dev)
+static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *cfg)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
- int num = qmp->cfg->num_clks;
+ int num = cfg->num_clks;
int i;
qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL);
@@ -2972,12 +3430,12 @@ static int qcom_qmp_phy_clk_init(struct device *dev)
return -ENOMEM;
for (i = 0; i < num; i++)
- qmp->clks[i].id = qmp->cfg->clk_list[i];
+ qmp->clks[i].id = cfg->clk_list[i];
return devm_clk_bulk_get(dev, num, qmp->clks);
}
-static void phy_pipe_clk_release_provider(void *res)
+static void phy_clk_release_provider(void *res)
{
of_clk_del_provider(res);
}
@@ -3006,12 +3464,6 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
struct clk_init_data init = { };
int ret;
- if ((qmp->cfg->type != PHY_TYPE_USB3) &&
- (qmp->cfg->type != PHY_TYPE_PCIE)) {
- /* not all phys register pipe clocks, so return success */
- return 0;
- }
-
ret = of_property_read_string(np, "clock-output-names", &init.name);
if (ret) {
dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
@@ -3040,9 +3492,202 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
* Roll a devm action because the clock provider is the child node, but
* the child node is not actually a device.
*/
- ret = devm_add_action(qmp->dev, phy_pipe_clk_release_provider, np);
+ ret = devm_add_action(qmp->dev, phy_clk_release_provider, np);
+ if (ret)
+ phy_clk_release_provider(np);
+
+ return ret;
+}
+
+/*
+ * Display Port PLL driver block diagram for branch clocks
+ *
+ * +------------------------------+
+ * | DP_VCO_CLK |
+ * | |
+ * | +-------------------+ |
+ * | | (DP PLL/VCO) | |
+ * | +---------+---------+ |
+ * | v |
+ * | +----------+-----------+ |
+ * | | hsclk_divsel_clk_src | |
+ * | +----------+-----------+ |
+ * +------------------------------+
+ * |
+ * +---------<---------v------------>----------+
+ * | |
+ * +--------v----------------+ |
+ * | dp_phy_pll_link_clk | |
+ * | link_clk | |
+ * +--------+----------------+ |
+ * | |
+ * | |
+ * v v
+ * Input to DISPCC block |
+ * for link clk, crypto clk |
+ * and interface clock |
+ * |
+ * |
+ * +--------<------------+-----------------+---<---+
+ * | | |
+ * +----v---------+ +--------v-----+ +--------v------+
+ * | vco_divided | | vco_divided | | vco_divided |
+ * | _clk_src | | _clk_src | | _clk_src |
+ * | | | | | |
+ * |divsel_six | | divsel_two | | divsel_four |
+ * +-------+------+ +-----+--------+ +--------+------+
+ * | | |
+ * v---->----------v-------------<------v
+ * |
+ * +----------+-----------------+
+ * | dp_phy_pll_vco_div_clk |
+ * +---------+------------------+
+ * |
+ * v
+ * Input to DISPCC block
+ * for DP pixel clock
+ *
+ */
+static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 1620000000UL / 2:
+ case 2700000000UL / 2:
+ /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ return 1620000000UL / 2;
+ case 2700:
+ return 2700000000UL / 2;
+ case 5400:
+ return 5400000000UL / 4;
+ case 8100:
+ return 8100000000UL / 6;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = {
+ .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate,
+};
+
+static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ switch (req->rate) {
+ case 162000000:
+ case 270000000:
+ case 540000000:
+ case 810000000:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static unsigned long
+qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ const struct qmp_phy_dp_clks *dp_clks;
+ const struct qmp_phy *qphy;
+ const struct phy_configure_opts_dp *dp_opts;
+
+ dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw);
+ qphy = dp_clks->qphy;
+ dp_opts = &qphy->dp_opts;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ case 2700:
+ case 5400:
+ case 8100:
+ return dp_opts->link_rate * 100000;
+ default:
+ return 0;
+ }
+}
+
+static const struct clk_ops qcom_qmp_dp_link_clk_ops = {
+ .determine_rate = qcom_qmp_dp_link_clk_determine_rate,
+ .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate,
+};
+
+static struct clk_hw *
+qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct qmp_phy_dp_clks *dp_clks = data;
+ unsigned int idx = clkspec->args[0];
+
+ if (idx >= 2) {
+ pr_err("%s: invalid index %u\n", __func__, idx);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (idx == 0)
+ return &dp_clks->dp_link_hw;
+
+ return &dp_clks->dp_pixel_hw;
+}
+
+static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
+ struct device_node *np)
+{
+ struct clk_init_data init = { };
+ struct qmp_phy_dp_clks *dp_clks;
+ int ret;
+
+ dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL);
+ if (!dp_clks)
+ return -ENOMEM;
+
+ dp_clks->qphy = qphy;
+ qphy->dp_clks = dp_clks;
+
+ init.ops = &qcom_qmp_dp_link_clk_ops;
+ init.name = "qmp_dp_phy_pll_link_clk";
+ dp_clks->dp_link_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw);
+ if (ret)
+ return ret;
+
+ init.ops = &qcom_qmp_dp_pixel_clk_ops;
+ init.name = "qmp_dp_phy_pll_vco_div_clk";
+ dp_clks->dp_pixel_hw.init = &init;
+ ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw);
+ if (ret)
+ return ret;
+
+ ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks);
+ if (ret)
+ return ret;
+
+ /*
+ * Roll a devm action because the clock provider is the child node, but
+ * the child node is not actually a device.
+ */
+ ret = devm_add_action(qmp->dev, phy_clk_release_provider, np);
if (ret)
- phy_pipe_clk_release_provider(np);
+ phy_clk_release_provider(np);
return ret;
}
@@ -3054,6 +3699,17 @@ static const struct phy_ops qcom_qmp_phy_gen_ops = {
.owner = THIS_MODULE,
};
+static const struct phy_ops qcom_qmp_phy_dp_ops = {
+ .init = qcom_qmp_phy_init,
+ .configure = qcom_qmp_dp_phy_configure,
+ .power_on = qcom_qmp_phy_power_on,
+ .calibrate = qcom_qmp_dp_phy_calibrate,
+ .power_off = qcom_qmp_phy_power_off,
+ .exit = qcom_qmp_phy_exit,
+ .set_mode = qcom_qmp_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
.power_on = qcom_qmp_phy_enable,
.power_off = qcom_qmp_phy_disable,
@@ -3062,12 +3718,13 @@ static const struct phy_ops qcom_qmp_pcie_ufs_ops = {
};
static
-int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
+int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
+ void __iomem *serdes, const struct qmp_phy_cfg *cfg)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
struct phy *generic_phy;
struct qmp_phy *qphy;
- const struct phy_ops *ops = &qcom_qmp_phy_gen_ops;
+ const struct phy_ops *ops;
char prop_name[MAX_PROP_NAME];
int ret;
@@ -3075,6 +3732,8 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
if (!qphy)
return -ENOMEM;
+ qphy->cfg = cfg;
+ qphy->serdes = serdes;
/*
* Get memory resources for each phy lane:
* Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2.
@@ -3099,7 +3758,7 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
* back to old legacy behavior of assuming they can be reached at an
* offset from the first lane.
*/
- if (qmp->cfg->is_dual_lane_phy) {
+ if (cfg->is_dual_lane_phy) {
qphy->tx2 = of_iomap(np, 3);
qphy->rx2 = of_iomap(np, 4);
if (!qphy->tx2 || !qphy->rx2) {
@@ -3132,8 +3791,8 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
qphy->pipe_clk = of_clk_get_by_name(np, prop_name);
if (IS_ERR(qphy->pipe_clk)) {
- if (qmp->cfg->type == PHY_TYPE_PCIE ||
- qmp->cfg->type == PHY_TYPE_USB3) {
+ if (cfg->type == PHY_TYPE_PCIE ||
+ cfg->type == PHY_TYPE_USB3) {
ret = PTR_ERR(qphy->pipe_clk);
if (ret != -EPROBE_DEFER)
dev_err(dev,
@@ -3145,7 +3804,7 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
}
/* Get lane reset, if any */
- if (qmp->cfg->has_lane_rst) {
+ if (cfg->has_lane_rst) {
snprintf(prop_name, sizeof(prop_name), "lane%d", id);
qphy->lane_rst = of_reset_control_get(np, prop_name);
if (IS_ERR(qphy->lane_rst)) {
@@ -3154,8 +3813,12 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
}
}
- if (qmp->cfg->type == PHY_TYPE_UFS || qmp->cfg->type == PHY_TYPE_PCIE)
+ if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE)
ops = &qcom_qmp_pcie_ufs_ops;
+ else if (cfg->type == PHY_TYPE_DP)
+ ops = &qcom_qmp_phy_dp_ops;
+ else
+ ops = &qcom_qmp_phy_gen_ops;
generic_phy = devm_phy_create(dev, np, ops);
if (IS_ERR(generic_phy)) {
@@ -3199,6 +3862,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
.compatible = "qcom,sc7180-qmp-usb3-phy",
.data = &sc7180_usb3phy_cfg,
}, {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ /* It's a combo phy */
+ }, {
.compatible = "qcom,sdm845-qhp-pcie-phy",
.data = &sdm845_qhp_pciephy_cfg,
}, {
@@ -3239,6 +3905,14 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
};
MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
+static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
+ {
+ .compatible = "qcom,sc7180-qmp-usb3-dp-phy",
+ .data = &sc7180_usb3dpphy_cfg,
+ },
+ { }
+};
+
static const struct dev_pm_ops qcom_qmp_phy_pm_ops = {
SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend,
qcom_qmp_phy_runtime_resume, NULL)
@@ -3248,11 +3922,16 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
{
struct qcom_qmp *qmp;
struct device *dev = &pdev->dev;
- struct resource *res;
struct device_node *child;
struct phy_provider *phy_provider;
- void __iomem *base;
- int num, id;
+ void __iomem *serdes;
+ void __iomem *usb_serdes;
+ void __iomem *dp_serdes;
+ const struct qmp_phy_combo_cfg *combo_cfg = NULL;
+ const struct qmp_phy_cfg *cfg = NULL;
+ const struct qmp_phy_cfg *usb_cfg = NULL;
+ const struct qmp_phy_cfg *dp_cfg = NULL;
+ int num, id, expected_phys;
int ret;
qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
@@ -3263,40 +3942,57 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
dev_set_drvdata(dev, qmp);
/* Get the specific init parameters of QMP phy */
- qmp->cfg = of_device_get_match_data(dev);
- if (!qmp->cfg)
- return -EINVAL;
+ cfg = of_device_get_match_data(dev);
+ if (!cfg) {
+ const struct of_device_id *match;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
+ match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev);
+ if (!match)
+ return -EINVAL;
+
+ combo_cfg = match->data;
+ if (!combo_cfg)
+ return -EINVAL;
+
+ usb_cfg = combo_cfg->usb_cfg;
+ cfg = usb_cfg; /* Setup clks and regulators */
+ }
/* per PHY serdes; usually located at base address */
- qmp->serdes = base;
+ usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(serdes))
+ return PTR_ERR(serdes);
/* per PHY dp_com; if PHY has dp_com control block */
- if (qmp->cfg->has_phy_dp_com_ctrl) {
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "dp_com");
- base = devm_ioremap_resource(dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- qmp->dp_com = base;
+ if (combo_cfg || cfg->has_phy_dp_com_ctrl) {
+ qmp->dp_com = devm_platform_ioremap_resource(pdev, 1);
+ if (IS_ERR(qmp->dp_com))
+ return PTR_ERR(qmp->dp_com);
+ }
+
+ if (combo_cfg) {
+ /* Only two serdes for combo PHY */
+ dp_serdes = devm_platform_ioremap_resource(pdev, 2);
+ if (IS_ERR(dp_serdes))
+ return PTR_ERR(dp_serdes);
+
+ dp_cfg = combo_cfg->dp_cfg;
+ expected_phys = 2;
+ } else {
+ expected_phys = cfg->nlanes;
}
mutex_init(&qmp->phy_mutex);
- ret = qcom_qmp_phy_clk_init(dev);
+ ret = qcom_qmp_phy_clk_init(dev, cfg);
if (ret)
return ret;
- ret = qcom_qmp_phy_reset_init(dev);
+ ret = qcom_qmp_phy_reset_init(dev, cfg);
if (ret)
return ret;
- ret = qcom_qmp_phy_vreg_init(dev);
+ ret = qcom_qmp_phy_vreg_init(dev, cfg);
if (ret) {
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get regulator supplies: %d\n",
@@ -3306,14 +4002,13 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
num = of_get_available_child_count(dev->of_node);
/* do we have a rogue child node ? */
- if (num > qmp->cfg->nlanes)
+ if (num > expected_phys)
return -EINVAL;
qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL);
if (!qmp->phys)
return -ENOMEM;
- id = 0;
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
/*
@@ -3322,9 +4017,18 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
*/
pm_runtime_forbid(dev);
+ id = 0;
for_each_available_child_of_node(dev->of_node, child) {
+ if (of_node_name_eq(child, "dp-phy")) {
+ cfg = dp_cfg;
+ serdes = dp_serdes;
+ } else if (of_node_name_eq(child, "usb3-phy")) {
+ cfg = usb_cfg;
+ serdes = usb_serdes;
+ }
+
/* Create per-lane phy */
- ret = qcom_qmp_phy_create(dev, child, id);
+ ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg);
if (ret) {
dev_err(dev, "failed to create lane%d phy, %d\n",
id, ret);
@@ -3335,11 +4039,20 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
* Register the pipe clock provided by phy.
* See function description to see details of this pipe clock.
*/
- ret = phy_pipe_clk_register(qmp, child);
- if (ret) {
- dev_err(qmp->dev,
- "failed to register pipe clock source\n");
- goto err_node_put;
+ if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) {
+ ret = phy_pipe_clk_register(qmp, child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register pipe clock source\n");
+ goto err_node_put;
+ }
+ } else if (cfg->type == PHY_TYPE_DP) {
+ ret = phy_dp_clks_register(qmp, qmp->phys[id], child);
+ if (ret) {
+ dev_err(qmp->dev,
+ "failed to register DP clock source\n");
+ goto err_node_put;
+ }
}
id++;
}
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 904b80ab9009..b7c530088a6c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -137,6 +137,9 @@
#define QPHY_V3_DP_COM_RESET_OVRD_CTRL 0x1c
/* Only for QMP V3 PHY - QSERDES COM registers */
+#define QSERDES_V3_COM_ATB_SEL1 0x000
+#define QSERDES_V3_COM_ATB_SEL2 0x004
+#define QSERDES_V3_COM_FREQ_UPDATE 0x008
#define QSERDES_V3_COM_BG_TIMER 0x00c
#define QSERDES_V3_COM_SSC_EN_CENTER 0x010
#define QSERDES_V3_COM_SSC_ADJ_PER1 0x014
@@ -146,6 +149,13 @@
#define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024
#define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028
#define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034
+# define QSERDES_V3_COM_BIAS_EN 0x0001
+# define QSERDES_V3_COM_BIAS_EN_MUX 0x0002
+# define QSERDES_V3_COM_CLKBUF_R_EN 0x0004
+# define QSERDES_V3_COM_CLKBUF_L_EN 0x0008
+# define QSERDES_V3_COM_EN_SYSCLK_TX_SEL 0x0010
+# define QSERDES_V3_COM_CLKBUF_RX_DRIVE_L 0x0020
+# define QSERDES_V3_COM_CLKBUF_RX_DRIVE_R 0x0040
#define QSERDES_V3_COM_CLK_ENABLE1 0x038
#define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c
#define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040
@@ -207,12 +217,36 @@
#define QSERDES_V3_COM_CMN_MODE 0x184
/* Only for QMP V3 PHY - TX registers */
+#define QSERDES_V3_TX_BIST_MODE_LANENO 0x000
+#define QSERDES_V3_TX_CLKBUF_ENABLE 0x008
+#define QSERDES_V3_TX_TX_EMP_POST1_LVL 0x00c
+# define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK 0x001f
+# define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN 0x0020
+
+#define QSERDES_V3_TX_TX_DRV_LVL 0x01c
+# define DP_PHY_TXn_TX_DRV_LVL_MASK 0x001f
+# define DP_PHY_TXn_TX_DRV_LVL_MUX_EN 0x0020
+
+#define QSERDES_V3_TX_RESET_TSYNC_EN 0x024
+#define QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN 0x028
+
+#define QSERDES_V3_TX_TX_BAND 0x02c
+#define QSERDES_V3_TX_SLEW_CNTL 0x030
+#define QSERDES_V3_TX_INTERFACE_SELECT 0x034
+#define QSERDES_V3_TX_RES_CODE_LANE_TX 0x03c
+#define QSERDES_V3_TX_RES_CODE_LANE_RX 0x040
#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX 0x044
#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX 0x048
#define QSERDES_V3_TX_DEBUG_BUS_SEL 0x058
+#define QSERDES_V3_TX_TRANSCEIVER_BIAS_EN 0x05c
#define QSERDES_V3_TX_HIGHZ_DRVR_EN 0x060
+#define QSERDES_V3_TX_TX_POL_INV 0x064
+#define QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN 0x068
#define QSERDES_V3_TX_LANE_MODE_1 0x08c
#define QSERDES_V3_TX_RCV_DETECT_LVL_2 0x0a4
+#define QSERDES_V3_TX_TRAN_DRVR_EMP_EN 0x0c0
+#define QSERDES_V3_TX_TX_INTERFACE_MODE 0x0c4
+#define QSERDES_V3_TX_VMODE_CTRL1 0x0f0
/* Only for QMP V3 PHY - RX registers */
#define QSERDES_V3_RX_UCDR_FO_GAIN 0x008
@@ -315,6 +349,52 @@
#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4 0x5c
#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5 0x60
+/* Only for QMP V3 PHY - DP PHY registers */
+#define QSERDES_V3_DP_PHY_REVISION_ID0 0x000
+#define QSERDES_V3_DP_PHY_REVISION_ID1 0x004
+#define QSERDES_V3_DP_PHY_REVISION_ID2 0x008
+#define QSERDES_V3_DP_PHY_REVISION_ID3 0x00c
+#define QSERDES_V3_DP_PHY_CFG 0x010
+#define QSERDES_V3_DP_PHY_PD_CTL 0x018
+# define DP_PHY_PD_CTL_PWRDN 0x001
+# define DP_PHY_PD_CTL_PSR_PWRDN 0x002
+# define DP_PHY_PD_CTL_AUX_PWRDN 0x004
+# define DP_PHY_PD_CTL_LANE_0_1_PWRDN 0x008
+# define DP_PHY_PD_CTL_LANE_2_3_PWRDN 0x010
+# define DP_PHY_PD_CTL_PLL_PWRDN 0x020
+# define DP_PHY_PD_CTL_DP_CLAMP_EN 0x040
+#define QSERDES_V3_DP_PHY_MODE 0x01c
+#define QSERDES_V3_DP_PHY_AUX_CFG0 0x020
+#define QSERDES_V3_DP_PHY_AUX_CFG1 0x024
+#define QSERDES_V3_DP_PHY_AUX_CFG2 0x028
+#define QSERDES_V3_DP_PHY_AUX_CFG3 0x02c
+#define QSERDES_V3_DP_PHY_AUX_CFG4 0x030
+#define QSERDES_V3_DP_PHY_AUX_CFG5 0x034
+#define QSERDES_V3_DP_PHY_AUX_CFG6 0x038
+#define QSERDES_V3_DP_PHY_AUX_CFG7 0x03c
+#define QSERDES_V3_DP_PHY_AUX_CFG8 0x040
+#define QSERDES_V3_DP_PHY_AUX_CFG9 0x044
+
+#define QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK 0x048
+# define PHY_AUX_STOP_ERR_MASK 0x01
+# define PHY_AUX_DEC_ERR_MASK 0x02
+# define PHY_AUX_SYNC_ERR_MASK 0x04
+# define PHY_AUX_ALIGN_ERR_MASK 0x08
+# define PHY_AUX_REQ_ERR_MASK 0x10
+
+#define QSERDES_V3_DP_PHY_AUX_INTERRUPT_CLEAR 0x04c
+#define QSERDES_V3_DP_PHY_AUX_BIST_CFG 0x050
+
+#define QSERDES_V3_DP_PHY_VCO_DIV 0x064
+#define QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL 0x06c
+#define QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL 0x088
+
+#define QSERDES_V3_DP_PHY_SPARE0 0x0ac
+#define DP_PHY_SPARE0_MASK 0x0f
+#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT 0x04(0x0004)
+
+#define QSERDES_V3_DP_PHY_STATUS 0x0c0
+
/* Only for QMP V4 PHY - QSERDES COM registers */
#define QSERDES_V4_COM_SSC_EN_CENTER 0x010
#define QSERDES_V4_COM_SSC_PER1 0x01c
diff --git a/drivers/phy/ralink/phy-ralink-usb.c b/drivers/phy/ralink/phy-ralink-usb.c
index ba3c197fc5b0..95dfa9fd284d 100644
--- a/drivers/phy/ralink/phy-ralink-usb.c
+++ b/drivers/phy/ralink/phy-ralink-usb.c
@@ -142,7 +142,7 @@ static int ralink_usb_phy_power_off(struct phy *_phy)
return 0;
}
-static struct phy_ops ralink_usb_phy_ops = {
+static const struct phy_ops ralink_usb_phy_ops = {
.power_on = ralink_usb_phy_power_on,
.power_off = ralink_usb_phy_power_off,
.owner = THIS_MODULE,
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 0824b9dd5683..c2f22f90736c 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -9,6 +9,18 @@ config PHY_ROCKCHIP_DP
help
Enable this to support the Rockchip Display Port PHY.
+config PHY_ROCKCHIP_DPHY_RX0
+ tristate "Rockchip MIPI Synopsys DPHY RX0 driver"
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
+ select GENERIC_PHY_MIPI_DPHY
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip MIPI Synopsys DPHY RX0
+ associated to the Rockchip ISP module present in RK3399 SoCs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called phy-rockchip-dphy-rx0.
+
config PHY_ROCKCHIP_EMMC
tristate "Rockchip EMMC PHY Driver"
depends on ARCH_ROCKCHIP && OF
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
index 9f59a81e4e0d..c3cfc7f0af5c 100644
--- a/drivers/phy/rockchip/Makefile
+++ b/drivers/phy/rockchip/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0) += phy-rockchip-dphy-rx0.o
obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY) += phy-rockchip-inno-dsidphy.o
obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o
diff --git a/drivers/staging/media/phy-rockchip-dphy-rx0/phy-rockchip-dphy-rx0.c b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
index 7c4df6d48c43..4df9476ef2a9 100644
--- a/drivers/staging/media/phy-rockchip-dphy-rx0/phy-rockchip-dphy-rx0.c
+++ b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
@@ -16,6 +16,7 @@
*/
#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 0d818b77a0d8..cfa9b8b7e5ac 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -16,6 +16,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/iopoll.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
@@ -556,41 +557,25 @@ static int exynos5_usbdrd_phy_power_off(struct phy *phy)
static int crport_handshake(struct exynos5_usbdrd_phy *phy_drd,
u32 val, u32 cmd)
{
- u32 usec = 100;
unsigned int result;
+ int err;
writel(val | cmd, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
- do {
- result = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1);
- if (result & PHYREG1_CR_ACK)
- break;
-
- udelay(1);
- } while (usec-- > 0);
-
- if (!usec) {
- dev_err(phy_drd->dev,
- "CRPORT handshake timeout1 (0x%08x)\n", val);
- return -ETIME;
+ err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1,
+ result, (result & PHYREG1_CR_ACK), 1, 100);
+ if (err == -ETIMEDOUT) {
+ dev_err(phy_drd->dev, "CRPORT handshake timeout1 (0x%08x)\n", val);
+ return err;
}
- usec = 100;
-
writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
- do {
- result = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1);
- if (!(result & PHYREG1_CR_ACK))
- break;
-
- udelay(1);
- } while (usec-- > 0);
-
- if (!usec) {
- dev_err(phy_drd->dev,
- "CRPORT handshake timeout2 (0x%08x)\n", val);
- return -ETIME;
+ err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1,
+ result, !(result & PHYREG1_CR_ACK), 1, 100);
+ if (err == -ETIMEDOUT) {
+ dev_err(phy_drd->dev, "CRPORT handshake timeout2 (0x%08x)\n", val);
+ return err;
}
return 0;
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
index 9832599a0283..dd9ab1519d83 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.c
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -268,7 +268,7 @@ static int samsung_ufs_phy_exit(struct phy *phy)
return 0;
}
-static struct phy_ops samsung_ufs_phy_ops = {
+static const struct phy_ops samsung_ufs_phy_ops = {
.init = samsung_ufs_phy_init,
.exit = samsung_ufs_phy_exit,
.power_on = samsung_ufs_phy_power_on,
diff --git a/drivers/phy/socionext/Kconfig b/drivers/phy/socionext/Kconfig
index 8c9d7c37536a..a3970e0f89da 100644
--- a/drivers/phy/socionext/Kconfig
+++ b/drivers/phy/socionext/Kconfig
@@ -34,3 +34,13 @@ config PHY_UNIPHIER_PCIE
help
Enable this to support PHY implemented in PCIe controller
on UniPhier SoCs. This driver supports LD20 and PXs3 SoCs.
+
+config PHY_UNIPHIER_AHCI
+ tristate "UniPhier AHCI PHY driver"
+ depends on ARCH_UNIPHIER || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ default SATA_AHCI_PLATFORM
+ select GENERIC_PHY
+ help
+ Enable this to support PHY implemented in AHCI controller
+ on UniPhier SoCs. This driver supports PXs2 and PXs3 SoCs.
diff --git a/drivers/phy/socionext/Makefile b/drivers/phy/socionext/Makefile
index 7dc9095b5bb7..e67c2da6675c 100644
--- a/drivers/phy/socionext/Makefile
+++ b/drivers/phy/socionext/Makefile
@@ -6,3 +6,4 @@
obj-$(CONFIG_PHY_UNIPHIER_USB2) += phy-uniphier-usb2.o
obj-$(CONFIG_PHY_UNIPHIER_USB3) += phy-uniphier-usb3hs.o phy-uniphier-usb3ss.o
obj-$(CONFIG_PHY_UNIPHIER_PCIE) += phy-uniphier-pcie.o
+obj-$(CONFIG_PHY_UNIPHIER_AHCI) += phy-uniphier-ahci.o
diff --git a/drivers/phy/socionext/phy-uniphier-ahci.c b/drivers/phy/socionext/phy-uniphier-ahci.c
new file mode 100644
index 000000000000..7427c40bf4ae
--- /dev/null
+++ b/drivers/phy/socionext/phy-uniphier-ahci.c
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * phy-uniphier-ahci.c - PHY driver for UniPhier AHCI controller
+ * Copyright 2016-2020, Socionext Inc.
+ * Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+struct uniphier_ahciphy_priv {
+ struct device *dev;
+ void __iomem *base;
+ struct clk *clk, *clk_parent;
+ struct reset_control *rst, *rst_parent;
+ const struct uniphier_ahciphy_soc_data *data;
+};
+
+struct uniphier_ahciphy_soc_data {
+ int (*init)(struct uniphier_ahciphy_priv *priv);
+ int (*power_on)(struct uniphier_ahciphy_priv *priv);
+ int (*power_off)(struct uniphier_ahciphy_priv *priv);
+ bool is_ready_high;
+ bool is_phy_clk;
+};
+
+/* for PXs2/PXs3 */
+#define CKCTRL 0x0
+#define CKCTRL_P0_READY BIT(15)
+#define CKCTRL_P0_RESET BIT(10)
+#define CKCTRL_REF_SSP_EN BIT(9)
+#define TXCTRL0 0x4
+#define TXCTRL0_AMP_G3_MASK GENMASK(22, 16)
+#define TXCTRL0_AMP_G2_MASK GENMASK(14, 8)
+#define TXCTRL0_AMP_G1_MASK GENMASK(6, 0)
+#define TXCTRL1 0x8
+#define TXCTRL1_DEEMPH_G3_MASK GENMASK(21, 16)
+#define TXCTRL1_DEEMPH_G2_MASK GENMASK(13, 8)
+#define TXCTRL1_DEEMPH_G1_MASK GENMASK(5, 0)
+#define RXCTRL 0xc
+#define RXCTRL_LOS_LVL_MASK GENMASK(20, 16)
+#define RXCTRL_LOS_BIAS_MASK GENMASK(10, 8)
+#define RXCTRL_RX_EQ_MASK GENMASK(2, 0)
+
+static void uniphier_ahciphy_pxs2_enable(struct uniphier_ahciphy_priv *priv,
+ bool enable)
+{
+ u32 val;
+
+ val = readl(priv->base + CKCTRL);
+
+ if (enable) {
+ val |= CKCTRL_REF_SSP_EN;
+ writel(val, priv->base + CKCTRL);
+ val &= ~CKCTRL_P0_RESET;
+ writel(val, priv->base + CKCTRL);
+ } else {
+ val |= CKCTRL_P0_RESET;
+ writel(val, priv->base + CKCTRL);
+ val &= ~CKCTRL_REF_SSP_EN;
+ writel(val, priv->base + CKCTRL);
+ }
+}
+
+static int uniphier_ahciphy_pxs2_power_on(struct uniphier_ahciphy_priv *priv)
+{
+ int ret;
+ u32 val;
+
+ uniphier_ahciphy_pxs2_enable(priv, true);
+
+ /* wait until PLL is ready */
+ if (priv->data->is_ready_high)
+ ret = readl_poll_timeout(priv->base + CKCTRL, val,
+ (val & CKCTRL_P0_READY), 200, 400);
+ else
+ ret = readl_poll_timeout(priv->base + CKCTRL, val,
+ !(val & CKCTRL_P0_READY), 200, 400);
+ if (ret) {
+ dev_err(priv->dev, "Failed to check whether PHY PLL is ready\n");
+ uniphier_ahciphy_pxs2_enable(priv, false);
+ }
+
+ return ret;
+}
+
+static int uniphier_ahciphy_pxs2_power_off(struct uniphier_ahciphy_priv *priv)
+{
+ uniphier_ahciphy_pxs2_enable(priv, false);
+
+ return 0;
+}
+
+static int uniphier_ahciphy_pxs3_init(struct uniphier_ahciphy_priv *priv)
+{
+ int i;
+ u32 val;
+
+ /* setup port parameter */
+ val = readl(priv->base + TXCTRL0);
+ val &= ~TXCTRL0_AMP_G3_MASK;
+ val |= FIELD_PREP(TXCTRL0_AMP_G3_MASK, 0x73);
+ val &= ~TXCTRL0_AMP_G2_MASK;
+ val |= FIELD_PREP(TXCTRL0_AMP_G2_MASK, 0x46);
+ val &= ~TXCTRL0_AMP_G1_MASK;
+ val |= FIELD_PREP(TXCTRL0_AMP_G1_MASK, 0x42);
+ writel(val, priv->base + TXCTRL0);
+
+ val = readl(priv->base + TXCTRL1);
+ val &= ~TXCTRL1_DEEMPH_G3_MASK;
+ val |= FIELD_PREP(TXCTRL1_DEEMPH_G3_MASK, 0x23);
+ val &= ~TXCTRL1_DEEMPH_G2_MASK;
+ val |= FIELD_PREP(TXCTRL1_DEEMPH_G2_MASK, 0x05);
+ val &= ~TXCTRL1_DEEMPH_G1_MASK;
+ val |= FIELD_PREP(TXCTRL1_DEEMPH_G1_MASK, 0x05);
+
+ val = readl(priv->base + RXCTRL);
+ val &= ~RXCTRL_LOS_LVL_MASK;
+ val |= FIELD_PREP(RXCTRL_LOS_LVL_MASK, 0x9);
+ val &= ~RXCTRL_LOS_BIAS_MASK;
+ val |= FIELD_PREP(RXCTRL_LOS_BIAS_MASK, 0x2);
+ val &= ~RXCTRL_RX_EQ_MASK;
+ val |= FIELD_PREP(RXCTRL_RX_EQ_MASK, 0x1);
+
+ /* dummy read 25 times to make a wait time for the phy to stabilize */
+ for (i = 0; i < 25; i++)
+ readl(priv->base + CKCTRL);
+
+ return 0;
+}
+
+static int uniphier_ahciphy_init(struct phy *phy)
+{
+ struct uniphier_ahciphy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = clk_prepare_enable(priv->clk_parent);
+ if (ret)
+ return ret;
+
+ ret = reset_control_deassert(priv->rst_parent);
+ if (ret)
+ goto out_clk_disable;
+
+ if (priv->data->init) {
+ ret = priv->data->init(priv);
+ if (ret)
+ goto out_rst_assert;
+ }
+
+ return 0;
+
+out_rst_assert:
+ reset_control_assert(priv->rst_parent);
+out_clk_disable:
+ clk_disable_unprepare(priv->clk_parent);
+
+ return ret;
+}
+
+static int uniphier_ahciphy_exit(struct phy *phy)
+{
+ struct uniphier_ahciphy_priv *priv = phy_get_drvdata(phy);
+
+ reset_control_assert(priv->rst_parent);
+ clk_disable_unprepare(priv->clk_parent);
+
+ return 0;
+}
+
+static int uniphier_ahciphy_power_on(struct phy *phy)
+{
+ struct uniphier_ahciphy_priv *priv = phy_get_drvdata(phy);
+ int ret = 0;
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+
+ ret = reset_control_deassert(priv->rst);
+ if (ret)
+ goto out_clk_disable;
+
+ if (priv->data->power_on) {
+ ret = priv->data->power_on(priv);
+ if (ret)
+ goto out_reset_assert;
+ }
+
+ return 0;
+
+out_reset_assert:
+ reset_control_assert(priv->rst);
+out_clk_disable:
+ clk_disable_unprepare(priv->clk);
+
+ return ret;
+}
+
+static int uniphier_ahciphy_power_off(struct phy *phy)
+{
+ struct uniphier_ahciphy_priv *priv = phy_get_drvdata(phy);
+ int ret = 0;
+
+ if (priv->data->power_off)
+ ret = priv->data->power_off(priv);
+
+ reset_control_assert(priv->rst);
+ clk_disable_unprepare(priv->clk);
+
+ return ret;
+}
+
+static const struct phy_ops uniphier_ahciphy_ops = {
+ .init = uniphier_ahciphy_init,
+ .exit = uniphier_ahciphy_exit,
+ .power_on = uniphier_ahciphy_power_on,
+ .power_off = uniphier_ahciphy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int uniphier_ahciphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct uniphier_ahciphy_priv *priv;
+ struct phy *phy;
+ struct phy_provider *phy_provider;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ priv->data = of_device_get_match_data(dev);
+ if (WARN_ON(!priv->data))
+ return -EINVAL;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->clk_parent = devm_clk_get(dev, "link");
+ if (IS_ERR(priv->clk_parent))
+ return PTR_ERR(priv->clk_parent);
+
+ if (priv->data->is_phy_clk) {
+ priv->clk = devm_clk_get(dev, "phy");
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+ }
+
+ priv->rst_parent = devm_reset_control_get_shared(dev, "link");
+ if (IS_ERR(priv->rst_parent))
+ return PTR_ERR(priv->rst_parent);
+
+ priv->rst = devm_reset_control_get_shared(dev, "phy");
+ if (IS_ERR(priv->rst))
+ return PTR_ERR(priv->rst);
+
+ phy = devm_phy_create(dev, dev->of_node, &uniphier_ahciphy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create phy\n");
+ return PTR_ERR(phy);
+ }
+
+ phy_set_drvdata(phy, priv);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ return 0;
+}
+
+static const struct uniphier_ahciphy_soc_data uniphier_pxs2_data = {
+ .power_on = uniphier_ahciphy_pxs2_power_on,
+ .power_off = uniphier_ahciphy_pxs2_power_off,
+ .is_ready_high = false,
+ .is_phy_clk = false,
+};
+
+static const struct uniphier_ahciphy_soc_data uniphier_pxs3_data = {
+ .init = uniphier_ahciphy_pxs3_init,
+ .power_on = uniphier_ahciphy_pxs2_power_on,
+ .power_off = uniphier_ahciphy_pxs2_power_off,
+ .is_ready_high = true,
+ .is_phy_clk = true,
+};
+
+static const struct of_device_id uniphier_ahciphy_match[] = {
+ {
+ .compatible = "socionext,uniphier-pxs2-ahci-phy",
+ .data = &uniphier_pxs2_data,
+ },
+ {
+ .compatible = "socionext,uniphier-pxs3-ahci-phy",
+ .data = &uniphier_pxs3_data,
+ },
+ { /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, uniphier_ahciphy_match);
+
+static struct platform_driver uniphier_ahciphy_driver = {
+ .probe = uniphier_ahciphy_probe,
+ .driver = {
+ .name = "uniphier-ahci-phy",
+ .of_match_table = uniphier_ahciphy_match,
+ },
+};
+module_platform_driver(uniphier_ahciphy_driver);
+
+MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
+MODULE_DESCRIPTION("UniPhier PHY driver for AHCI controller");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
index 819c49af169a..2ff56ce77b30 100644
--- a/drivers/phy/ti/phy-am654-serdes.c
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -19,15 +19,38 @@
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
+#define CMU_R004 0x4
+#define CMU_R060 0x60
#define CMU_R07C 0x7c
-
+#define CMU_R088 0x88
+#define CMU_R0D0 0xd0
+#define CMU_R0E8 0xe8
+
+#define LANE_R048 0x248
+#define LANE_R058 0x258
+#define LANE_R06c 0x26c
+#define LANE_R070 0x270
+#define LANE_R070 0x270
+#define LANE_R19C 0x39c
+
+#define COMLANE_R004 0xa04
#define COMLANE_R138 0xb38
-#define VERSION 0x70
+#define VERSION_VAL 0x70
#define COMLANE_R190 0xb90
-
#define COMLANE_R194 0xb94
+#define COMRXEQ_R004 0x1404
+#define COMRXEQ_R008 0x1408
+#define COMRXEQ_R00C 0x140c
+#define COMRXEQ_R014 0x1414
+#define COMRXEQ_R018 0x1418
+#define COMRXEQ_R01C 0x141c
+#define COMRXEQ_R04C 0x144c
+#define COMRXEQ_R088 0x1488
+#define COMRXEQ_R094 0x1494
+#define COMRXEQ_R098 0x1498
+
#define SERDES_CTRL 0x1fd0
#define WIZ_LANEXCTL_STS 0x1fe0
@@ -80,27 +103,136 @@ static const struct regmap_config serdes_am654_regmap_config = {
.max_register = 0x1ffc,
};
-static const struct reg_field cmu_master_cdn_o = REG_FIELD(CMU_R07C, 24, 24);
-static const struct reg_field config_version = REG_FIELD(COMLANE_R138, 16, 23);
-static const struct reg_field l1_master_cdn_o = REG_FIELD(COMLANE_R190, 9, 9);
-static const struct reg_field cmu_ok_i_0 = REG_FIELD(COMLANE_R194, 19, 19);
-static const struct reg_field por_en = REG_FIELD(SERDES_CTRL, 29, 29);
-static const struct reg_field tx0_enable = REG_FIELD(WIZ_LANEXCTL_STS, 29, 31);
-static const struct reg_field rx0_enable = REG_FIELD(WIZ_LANEXCTL_STS, 13, 15);
-static const struct reg_field pll_enable = REG_FIELD(WIZ_PLL_CTRL, 29, 31);
-static const struct reg_field pll_ok = REG_FIELD(WIZ_PLL_CTRL, 28, 28);
+enum serdes_am654_fields {
+ /* CMU PLL Control */
+ CMU_PLL_CTRL,
+
+ LANE_PLL_CTRL_RXEQ_RXIDLE,
+
+ /* CMU VCO bias current and VREG setting */
+ AHB_PMA_CM_VCO_VBIAS_VREG,
+ AHB_PMA_CM_VCO_BIAS_VREG,
+
+ AHB_PMA_CM_SR,
+ AHB_SSC_GEN_Z_O_20_13,
+
+ /* AHB PMA Lane Configuration */
+ AHB_PMA_LN_AGC_THSEL_VREGH,
+
+ /* AGC and Signal detect threshold for Gen3 */
+ AHB_PMA_LN_GEN3_AGC_SD_THSEL,
+
+ AHB_PMA_LN_RX_SELR_GEN3,
+ AHB_PMA_LN_TX_DRV,
+
+ /* CMU Master Reset */
+ CMU_MASTER_CDN,
+
+ /* P2S ring buffer initial startup pointer difference */
+ P2S_RBUF_PTR_DIFF,
+
+ CONFIG_VERSION,
+
+ /* Lane 1 Master Reset */
+ L1_MASTER_CDN,
+
+ /* CMU OK Status */
+ CMU_OK_I_0,
+
+ /* Mid-speed initial calibration control */
+ COMRXEQ_MS_INIT_CTRL_7_0,
+
+ /* High-speed initial calibration control */
+ COMRXEQ_HS_INIT_CAL_7_0,
+
+ /* Mid-speed recalibration control */
+ COMRXEQ_MS_RECAL_CTRL_7_0,
+
+ /* High-speed recalibration control */
+ COMRXEQ_HS_RECAL_CTRL_7_0,
+
+ /* ATT configuration */
+ COMRXEQ_CSR_ATT_CONFIG,
+
+ /* Edge based boost adaptation window length */
+ COMRXEQ_CSR_EBSTADAPT_WIN_LEN,
+
+ /* COMRXEQ control 3 & 4 */
+ COMRXEQ_CTRL_3_4,
+
+ /* COMRXEQ control 14, 15 and 16*/
+ COMRXEQ_CTRL_14_15_16,
+
+ /* Threshold for errors in pattern data */
+ COMRXEQ_CSR_DLEV_ERR_THRESH,
+
+ /* COMRXEQ control 25 */
+ COMRXEQ_CTRL_25,
+
+ /* Mid-speed rate change calibration control */
+ CSR_RXEQ_RATE_CHANGE_CAL_RUN_RATE2_O,
+
+ /* High-speed rate change calibration control */
+ COMRXEQ_HS_RCHANGE_CTRL_7_0,
+
+ /* Serdes reset */
+ POR_EN,
+
+ /* Tx Enable Value */
+ TX0_ENABLE,
+
+ /* Rx Enable Value */
+ RX0_ENABLE,
+
+ /* PLL Enable Value */
+ PLL_ENABLE,
+
+ /* PLL ready for use */
+ PLL_OK,
+
+ /* sentinel */
+ MAX_FIELDS
+
+};
+
+static const struct reg_field serdes_am654_reg_fields[] = {
+ [CMU_PLL_CTRL] = REG_FIELD(CMU_R004, 8, 15),
+ [AHB_PMA_CM_VCO_VBIAS_VREG] = REG_FIELD(CMU_R060, 8, 15),
+ [CMU_MASTER_CDN] = REG_FIELD(CMU_R07C, 24, 31),
+ [AHB_PMA_CM_VCO_BIAS_VREG] = REG_FIELD(CMU_R088, 24, 31),
+ [AHB_PMA_CM_SR] = REG_FIELD(CMU_R0D0, 24, 31),
+ [AHB_SSC_GEN_Z_O_20_13] = REG_FIELD(CMU_R0E8, 8, 15),
+ [LANE_PLL_CTRL_RXEQ_RXIDLE] = REG_FIELD(LANE_R048, 8, 15),
+ [AHB_PMA_LN_AGC_THSEL_VREGH] = REG_FIELD(LANE_R058, 16, 23),
+ [AHB_PMA_LN_GEN3_AGC_SD_THSEL] = REG_FIELD(LANE_R06c, 0, 7),
+ [AHB_PMA_LN_RX_SELR_GEN3] = REG_FIELD(LANE_R070, 16, 23),
+ [AHB_PMA_LN_TX_DRV] = REG_FIELD(LANE_R19C, 16, 23),
+ [P2S_RBUF_PTR_DIFF] = REG_FIELD(COMLANE_R004, 0, 7),
+ [CONFIG_VERSION] = REG_FIELD(COMLANE_R138, 16, 23),
+ [L1_MASTER_CDN] = REG_FIELD(COMLANE_R190, 8, 15),
+ [CMU_OK_I_0] = REG_FIELD(COMLANE_R194, 19, 19),
+ [COMRXEQ_MS_INIT_CTRL_7_0] = REG_FIELD(COMRXEQ_R004, 24, 31),
+ [COMRXEQ_HS_INIT_CAL_7_0] = REG_FIELD(COMRXEQ_R008, 0, 7),
+ [COMRXEQ_MS_RECAL_CTRL_7_0] = REG_FIELD(COMRXEQ_R00C, 8, 15),
+ [COMRXEQ_HS_RECAL_CTRL_7_0] = REG_FIELD(COMRXEQ_R00C, 16, 23),
+ [COMRXEQ_CSR_ATT_CONFIG] = REG_FIELD(COMRXEQ_R014, 16, 23),
+ [COMRXEQ_CSR_EBSTADAPT_WIN_LEN] = REG_FIELD(COMRXEQ_R018, 16, 23),
+ [COMRXEQ_CTRL_3_4] = REG_FIELD(COMRXEQ_R01C, 8, 15),
+ [COMRXEQ_CTRL_14_15_16] = REG_FIELD(COMRXEQ_R04C, 0, 7),
+ [COMRXEQ_CSR_DLEV_ERR_THRESH] = REG_FIELD(COMRXEQ_R088, 16, 23),
+ [COMRXEQ_CTRL_25] = REG_FIELD(COMRXEQ_R094, 24, 31),
+ [CSR_RXEQ_RATE_CHANGE_CAL_RUN_RATE2_O] = REG_FIELD(COMRXEQ_R098, 8, 15),
+ [COMRXEQ_HS_RCHANGE_CTRL_7_0] = REG_FIELD(COMRXEQ_R098, 16, 23),
+ [POR_EN] = REG_FIELD(SERDES_CTRL, 29, 29),
+ [TX0_ENABLE] = REG_FIELD(WIZ_LANEXCTL_STS, 29, 31),
+ [RX0_ENABLE] = REG_FIELD(WIZ_LANEXCTL_STS, 13, 15),
+ [PLL_ENABLE] = REG_FIELD(WIZ_PLL_CTRL, 29, 31),
+ [PLL_OK] = REG_FIELD(WIZ_PLL_CTRL, 28, 28),
+};
struct serdes_am654 {
struct regmap *regmap;
- struct regmap_field *cmu_master_cdn_o;
- struct regmap_field *config_version;
- struct regmap_field *l1_master_cdn_o;
- struct regmap_field *cmu_ok_i_0;
- struct regmap_field *por_en;
- struct regmap_field *tx0_enable;
- struct regmap_field *rx0_enable;
- struct regmap_field *pll_enable;
- struct regmap_field *pll_ok;
+ struct regmap_field *fields[MAX_FIELDS];
struct device *dev;
struct mux_control *control;
@@ -116,12 +248,12 @@ static int serdes_am654_enable_pll(struct serdes_am654 *phy)
int ret;
u32 val;
- ret = regmap_field_write(phy->pll_enable, PLL_ENABLE_STATE);
+ ret = regmap_field_write(phy->fields[PLL_ENABLE], PLL_ENABLE_STATE);
if (ret)
return ret;
- return regmap_field_read_poll_timeout(phy->pll_ok, val, val, 1000,
- PLL_LOCK_TIME);
+ return regmap_field_read_poll_timeout(phy->fields[PLL_OK], val, val,
+ 1000, PLL_LOCK_TIME);
}
static void serdes_am654_disable_pll(struct serdes_am654 *phy)
@@ -129,41 +261,39 @@ static void serdes_am654_disable_pll(struct serdes_am654 *phy)
struct device *dev = phy->dev;
int ret;
- ret = regmap_field_write(phy->pll_enable, PLL_DISABLE_STATE);
+ ret = regmap_field_write(phy->fields[PLL_ENABLE], PLL_DISABLE_STATE);
if (ret)
dev_err(dev, "Failed to disable PLL\n");
}
static int serdes_am654_enable_txrx(struct serdes_am654 *phy)
{
- int ret;
+ int ret = 0;
/* Enable TX */
- ret = regmap_field_write(phy->tx0_enable, TX0_ENABLE_STATE);
- if (ret)
- return ret;
+ ret |= regmap_field_write(phy->fields[TX0_ENABLE], TX0_ENABLE_STATE);
/* Enable RX */
- ret = regmap_field_write(phy->rx0_enable, RX0_ENABLE_STATE);
+ ret |= regmap_field_write(phy->fields[RX0_ENABLE], RX0_ENABLE_STATE);
+
if (ret)
- return ret;
+ return -EIO;
return 0;
}
static int serdes_am654_disable_txrx(struct serdes_am654 *phy)
{
- int ret;
+ int ret = 0;
/* Disable TX */
- ret = regmap_field_write(phy->tx0_enable, TX0_DISABLE_STATE);
- if (ret)
- return ret;
+ ret |= regmap_field_write(phy->fields[TX0_ENABLE], TX0_DISABLE_STATE);
/* Disable RX */
- ret = regmap_field_write(phy->rx0_enable, RX0_DISABLE_STATE);
+ ret |= regmap_field_write(phy->fields[RX0_ENABLE], RX0_DISABLE_STATE);
+
if (ret)
- return ret;
+ return -EIO;
return 0;
}
@@ -187,8 +317,8 @@ static int serdes_am654_power_on(struct phy *x)
return ret;
}
- return regmap_field_read_poll_timeout(phy->cmu_ok_i_0, val, val,
- SLEEP_TIME, PLL_LOCK_TIME);
+ return regmap_field_read_poll_timeout(phy->fields[CMU_OK_I_0], val,
+ val, SLEEP_TIME, PLL_LOCK_TIME);
}
static int serdes_am654_power_off(struct phy *x)
@@ -286,19 +416,37 @@ static int serdes_am654_usb3_init(struct serdes_am654 *phy)
static int serdes_am654_pcie_init(struct serdes_am654 *phy)
{
- int ret;
-
- ret = regmap_field_write(phy->config_version, VERSION);
- if (ret)
- return ret;
+ int ret = 0;
- ret = regmap_field_write(phy->cmu_master_cdn_o, 0x1);
- if (ret)
- return ret;
+ ret |= regmap_field_write(phy->fields[CMU_PLL_CTRL], 0x2);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_CM_VCO_VBIAS_VREG], 0x98);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_CM_VCO_BIAS_VREG], 0x98);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_CM_SR], 0x45);
+ ret |= regmap_field_write(phy->fields[AHB_SSC_GEN_Z_O_20_13], 0xe);
+ ret |= regmap_field_write(phy->fields[LANE_PLL_CTRL_RXEQ_RXIDLE], 0x5);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_LN_AGC_THSEL_VREGH], 0x83);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_LN_GEN3_AGC_SD_THSEL], 0x83);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_LN_RX_SELR_GEN3], 0x81);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_LN_TX_DRV], 0x3b);
+ ret |= regmap_field_write(phy->fields[P2S_RBUF_PTR_DIFF], 0x3);
+ ret |= regmap_field_write(phy->fields[CONFIG_VERSION], VERSION_VAL);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_MS_INIT_CTRL_7_0], 0xf);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_HS_INIT_CAL_7_0], 0x4f);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_MS_RECAL_CTRL_7_0], 0xf);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_HS_RECAL_CTRL_7_0], 0x4f);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CSR_ATT_CONFIG], 0x7);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CSR_EBSTADAPT_WIN_LEN], 0x7f);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CTRL_3_4], 0xf);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CTRL_14_15_16], 0x9a);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CSR_DLEV_ERR_THRESH], 0x32);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CTRL_25], 0x80);
+ ret |= regmap_field_write(phy->fields[CSR_RXEQ_RATE_CHANGE_CAL_RUN_RATE2_O], 0xf);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_HS_RCHANGE_CTRL_7_0], 0x4f);
+ ret |= regmap_field_write(phy->fields[CMU_MASTER_CDN], 0x1);
+ ret |= regmap_field_write(phy->fields[L1_MASTER_CDN], 0x2);
- ret = regmap_field_write(phy->l1_master_cdn_o, 0x1);
if (ret)
- return ret;
+ return -EIO;
return 0;
}
@@ -320,20 +468,19 @@ static int serdes_am654_init(struct phy *x)
static int serdes_am654_reset(struct phy *x)
{
struct serdes_am654 *phy = phy_get_drvdata(x);
- int ret;
+ int ret = 0;
serdes_am654_disable_pll(phy);
serdes_am654_disable_txrx(phy);
- ret = regmap_field_write(phy->por_en, 0x1);
- if (ret)
- return ret;
+ ret |= regmap_field_write(phy->fields[POR_EN], 0x1);
mdelay(1);
- ret = regmap_field_write(phy->por_en, 0x0);
+ ret |= regmap_field_write(phy->fields[POR_EN], 0x0);
+
if (ret)
- return ret;
+ return -EIO;
return 0;
}
@@ -587,66 +734,16 @@ static int serdes_am654_regfield_init(struct serdes_am654 *am654_phy)
{
struct regmap *regmap = am654_phy->regmap;
struct device *dev = am654_phy->dev;
+ int i;
- am654_phy->cmu_master_cdn_o = devm_regmap_field_alloc(dev, regmap,
- cmu_master_cdn_o);
- if (IS_ERR(am654_phy->cmu_master_cdn_o)) {
- dev_err(dev, "CMU_MASTER_CDN_O reg field init failed\n");
- return PTR_ERR(am654_phy->cmu_master_cdn_o);
- }
-
- am654_phy->config_version = devm_regmap_field_alloc(dev, regmap,
- config_version);
- if (IS_ERR(am654_phy->config_version)) {
- dev_err(dev, "CONFIG_VERSION reg field init failed\n");
- return PTR_ERR(am654_phy->config_version);
- }
-
- am654_phy->l1_master_cdn_o = devm_regmap_field_alloc(dev, regmap,
- l1_master_cdn_o);
- if (IS_ERR(am654_phy->l1_master_cdn_o)) {
- dev_err(dev, "L1_MASTER_CDN_O reg field init failed\n");
- return PTR_ERR(am654_phy->l1_master_cdn_o);
- }
-
- am654_phy->cmu_ok_i_0 = devm_regmap_field_alloc(dev, regmap,
- cmu_ok_i_0);
- if (IS_ERR(am654_phy->cmu_ok_i_0)) {
- dev_err(dev, "CMU_OK_I_0 reg field init failed\n");
- return PTR_ERR(am654_phy->cmu_ok_i_0);
- }
-
- am654_phy->por_en = devm_regmap_field_alloc(dev, regmap, por_en);
- if (IS_ERR(am654_phy->por_en)) {
- dev_err(dev, "POR_EN reg field init failed\n");
- return PTR_ERR(am654_phy->por_en);
- }
-
- am654_phy->tx0_enable = devm_regmap_field_alloc(dev, regmap,
- tx0_enable);
- if (IS_ERR(am654_phy->tx0_enable)) {
- dev_err(dev, "TX0_ENABLE reg field init failed\n");
- return PTR_ERR(am654_phy->tx0_enable);
- }
-
- am654_phy->rx0_enable = devm_regmap_field_alloc(dev, regmap,
- rx0_enable);
- if (IS_ERR(am654_phy->rx0_enable)) {
- dev_err(dev, "RX0_ENABLE reg field init failed\n");
- return PTR_ERR(am654_phy->rx0_enable);
- }
-
- am654_phy->pll_enable = devm_regmap_field_alloc(dev, regmap,
- pll_enable);
- if (IS_ERR(am654_phy->pll_enable)) {
- dev_err(dev, "PLL_ENABLE reg field init failed\n");
- return PTR_ERR(am654_phy->pll_enable);
- }
-
- am654_phy->pll_ok = devm_regmap_field_alloc(dev, regmap, pll_ok);
- if (IS_ERR(am654_phy->pll_ok)) {
- dev_err(dev, "PLL_OK reg field init failed\n");
- return PTR_ERR(am654_phy->pll_ok);
+ for (i = 0; i < MAX_FIELDS; i++) {
+ am654_phy->fields[i] = devm_regmap_field_alloc(dev,
+ regmap,
+ serdes_am654_reg_fields[i]);
+ if (IS_ERR(am654_phy->fields[i])) {
+ dev_err(dev, "Unable to allocate regmap field %d\n", i);
+ return PTR_ERR(am654_phy->fields[i]);
+ }
}
return 0;
diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index 7edd5c3bc536..5fd2e8a08bfc 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/phy/phy.h>
@@ -22,7 +23,7 @@
#define AM33XX_GMII_SEL_MODE_RGMII 2
enum {
- PHY_GMII_SEL_PORT_MODE,
+ PHY_GMII_SEL_PORT_MODE = 0,
PHY_GMII_SEL_RGMII_ID_MODE,
PHY_GMII_SEL_RMII_IO_CLK_EN,
PHY_GMII_SEL_LAST,
@@ -41,6 +42,7 @@ struct phy_gmii_sel_soc_data {
u32 num_ports;
u32 features;
const struct reg_field (*regfields)[PHY_GMII_SEL_LAST];
+ bool use_of_data;
};
struct phy_gmii_sel_priv {
@@ -49,6 +51,8 @@ struct phy_gmii_sel_priv {
struct regmap *regmap;
struct phy_provider *phy_provider;
struct phy_gmii_sel_phy_priv *if_phys;
+ u32 num_ports;
+ u32 reg_offset;
};
static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
@@ -147,13 +151,9 @@ static const
struct reg_field phy_gmii_sel_fields_dra7[][PHY_GMII_SEL_LAST] = {
{
[PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 0, 1),
- [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD((~0), 0, 0),
- [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD((~0), 0, 0),
},
{
[PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 4, 5),
- [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD((~0), 0, 0),
- [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD((~0), 0, 0),
},
};
@@ -172,16 +172,19 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dm814 = {
static const
struct reg_field phy_gmii_sel_fields_am654[][PHY_GMII_SEL_LAST] = {
- {
- [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x4040, 0, 1),
- [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD((~0), 0, 0),
- [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD((~0), 0, 0),
- },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x0, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x4, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x8, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0xC, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x10, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x14, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x18, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x1C, 0, 2), },
};
static const
struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am654 = {
- .num_ports = 1,
+ .use_of_data = true,
.regfields = phy_gmii_sel_fields_am654,
};
@@ -228,7 +231,7 @@ static struct phy *phy_gmii_sel_of_xlate(struct device *dev,
if (priv->soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN) &&
args->args_count < 2)
return ERR_PTR(-EINVAL);
- if (phy_id > priv->soc_data->num_ports)
+ if (phy_id > priv->num_ports)
return ERR_PTR(-EINVAL);
if (phy_id != priv->if_phys[phy_id - 1].id)
return ERR_PTR(-EINVAL);
@@ -242,68 +245,97 @@ static struct phy *phy_gmii_sel_of_xlate(struct device *dev,
return priv->if_phys[phy_id].if_phy;
}
-static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv)
+static int phy_gmii_init_phy(struct phy_gmii_sel_priv *priv, int port,
+ struct phy_gmii_sel_phy_priv *if_phy)
{
const struct phy_gmii_sel_soc_data *soc_data = priv->soc_data;
struct device *dev = priv->dev;
+ const struct reg_field *fields;
+ struct regmap_field *regfield;
+ struct reg_field field;
+ int ret;
+
+ if_phy->id = port;
+ if_phy->priv = priv;
+
+ fields = soc_data->regfields[port - 1];
+ field = *fields++;
+ field.reg += priv->reg_offset;
+ dev_dbg(dev, "%s field %x %d %d\n", __func__,
+ field.reg, field.msb, field.lsb);
+
+ regfield = devm_regmap_field_alloc(dev, priv->regmap, field);
+ if (IS_ERR(regfield))
+ return PTR_ERR(regfield);
+ if_phy->fields[PHY_GMII_SEL_PORT_MODE] = regfield;
+
+ field = *fields++;
+ field.reg += priv->reg_offset;
+ if (soc_data->features & BIT(PHY_GMII_SEL_RGMII_ID_MODE)) {
+ regfield = devm_regmap_field_alloc(dev,
+ priv->regmap,
+ field);
+ if (IS_ERR(regfield))
+ return PTR_ERR(regfield);
+ if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE] = regfield;
+ dev_dbg(dev, "%s field %x %d %d\n", __func__,
+ field.reg, field.msb, field.lsb);
+ }
+
+ field = *fields;
+ field.reg += priv->reg_offset;
+ if (soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN)) {
+ regfield = devm_regmap_field_alloc(dev,
+ priv->regmap,
+ field);
+ if (IS_ERR(regfield))
+ return PTR_ERR(regfield);
+ if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN] = regfield;
+ dev_dbg(dev, "%s field %x %d %d\n", __func__,
+ field.reg, field.msb, field.lsb);
+ }
+
+ if_phy->if_phy = devm_phy_create(dev,
+ priv->dev->of_node,
+ &phy_gmii_sel_ops);
+ if (IS_ERR(if_phy->if_phy)) {
+ ret = PTR_ERR(if_phy->if_phy);
+ dev_err(dev, "Failed to create phy%d %d\n", port, ret);
+ return ret;
+ }
+ phy_set_drvdata(if_phy->if_phy, if_phy);
+
+ return 0;
+}
+
+static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv)
+{
+ const struct phy_gmii_sel_soc_data *soc_data = priv->soc_data;
struct phy_gmii_sel_phy_priv *if_phys;
- int i, num_ports, ret;
+ struct device *dev = priv->dev;
+ int i, ret;
- num_ports = priv->soc_data->num_ports;
+ if (soc_data->use_of_data) {
+ const __be32 *offset;
+ u64 size;
- if_phys = devm_kcalloc(priv->dev, num_ports,
+ offset = of_get_address(dev->of_node, 0, &size, NULL);
+ priv->num_ports = size / sizeof(u32);
+ if (!priv->num_ports)
+ return -EINVAL;
+ priv->reg_offset = __be32_to_cpu(*offset);
+ }
+
+ if_phys = devm_kcalloc(dev, priv->num_ports,
sizeof(*if_phys), GFP_KERNEL);
if (!if_phys)
return -ENOMEM;
- dev_dbg(dev, "%s %d\n", __func__, num_ports);
-
- for (i = 0; i < num_ports; i++) {
- const struct reg_field *field;
- struct regmap_field *regfield;
+ dev_dbg(dev, "%s %d\n", __func__, priv->num_ports);
- if_phys[i].id = i + 1;
- if_phys[i].priv = priv;
-
- field = &soc_data->regfields[i][PHY_GMII_SEL_PORT_MODE];
- dev_dbg(dev, "%s field %x %d %d\n", __func__,
- field->reg, field->msb, field->lsb);
-
- regfield = devm_regmap_field_alloc(dev, priv->regmap, *field);
- if (IS_ERR(regfield))
- return PTR_ERR(regfield);
- if_phys[i].fields[PHY_GMII_SEL_PORT_MODE] = regfield;
-
- field = &soc_data->regfields[i][PHY_GMII_SEL_RGMII_ID_MODE];
- if (field->reg != (~0)) {
- regfield = devm_regmap_field_alloc(dev,
- priv->regmap,
- *field);
- if (IS_ERR(regfield))
- return PTR_ERR(regfield);
- if_phys[i].fields[PHY_GMII_SEL_RGMII_ID_MODE] =
- regfield;
- }
-
- field = &soc_data->regfields[i][PHY_GMII_SEL_RMII_IO_CLK_EN];
- if (field->reg != (~0)) {
- regfield = devm_regmap_field_alloc(dev,
- priv->regmap,
- *field);
- if (IS_ERR(regfield))
- return PTR_ERR(regfield);
- if_phys[i].fields[PHY_GMII_SEL_RMII_IO_CLK_EN] =
- regfield;
- }
-
- if_phys[i].if_phy = devm_phy_create(dev,
- priv->dev->of_node,
- &phy_gmii_sel_ops);
- if (IS_ERR(if_phys[i].if_phy)) {
- ret = PTR_ERR(if_phys[i].if_phy);
- dev_err(dev, "Failed to create phy%d %d\n", i, ret);
+ for (i = 0; i < priv->num_ports; i++) {
+ ret = phy_gmii_init_phy(priv, i + 1, &if_phys[i]);
+ if (ret)
return ret;
- }
- phy_set_drvdata(if_phys[i].if_phy, &if_phys[i]);
}
priv->if_phys = if_phys;
@@ -328,6 +360,7 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
priv->dev = &pdev->dev;
priv->soc_data = of_id->data;
+ priv->num_ports = priv->soc_data->num_ports;
priv->regmap = syscon_node_to_regmap(node->parent);
if (IS_ERR(priv->regmap)) {
diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
index 33c4cf0105a4..c9cfafe89cbf 100644
--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -20,7 +20,6 @@
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset-controller.h>
-#include <dt-bindings/phy/phy.h>
#define WIZ_SERDES_CTRL 0x404
#define WIZ_SERDES_TOP_CTRL 0x408
diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index 507f79d14adb..4fec90d2624f 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -6,23 +6,23 @@
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*/
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/io.h>
-#include <linux/phy/omap_usb.h>
-#include <linux/usb/phy_companion.h>
#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/pm_runtime.h>
#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
#include <linux/phy/omap_control_phy.h>
+#include <linux/phy/omap_usb.h>
#include <linux/phy/phy.h>
-#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
-#include <linux/of_platform.h>
+#include <linux/slab.h>
#include <linux/sys_soc.h>
+#include <linux/usb/phy_companion.h>
#define USB2PHY_ANA_CONFIG1 0x4c
#define USB2PHY_DISCON_BYP_LATCH BIT(31)
@@ -89,7 +89,7 @@ static inline void omap_usb_writel(void __iomem *addr, unsigned int offset,
}
/**
- * omap_usb2_set_comparator - links the comparator present in the sytem with
+ * omap_usb2_set_comparator - links the comparator present in the system with
* this phy
* @comparator - the companion phy(comparator) for this phy
*
@@ -142,7 +142,7 @@ static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
}
static int omap_usb_set_peripheral(struct usb_otg *otg,
- struct usb_gadget *gadget)
+ struct usb_gadget *gadget)
{
otg->gadget = gadget;
if (!gadget)
@@ -409,7 +409,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
return PTR_ERR(phy->phy_base);
phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
- "syscon-phy-power");
+ "syscon-phy-power");
if (IS_ERR(phy->syscon_phy_power)) {
dev_dbg(&pdev->dev,
"can't get syscon-phy-power, using control device\n");
@@ -438,7 +438,6 @@ static int omap_usb2_probe(struct platform_device *pdev)
}
}
-
phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
@@ -452,10 +451,10 @@ static int omap_usb2_probe(struct platform_device *pdev)
if (PTR_ERR(phy->wkupclk) != -EPROBE_DEFER)
dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
return PTR_ERR(phy->wkupclk);
- } else {
- dev_warn(&pdev->dev,
- "found usb_phy_cm_clk32k, please fix DTS\n");
}
+
+ dev_warn(&pdev->dev,
+ "found usb_phy_cm_clk32k, please fix DTS\n");
}
phy->optclk = devm_clk_get(phy->dev, "refclk");
@@ -504,7 +503,6 @@ static int omap_usb2_probe(struct platform_device *pdev)
return PTR_ERR(phy_provider);
}
-
usb_add_phy_dev(&phy->phy);
return 0;
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index d9efbfd29646..97e848740e13 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -140,6 +140,17 @@ config RESET_QCOM_PDC
to control reset signals provided by PDC for Modem, Compute,
Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
+config RESET_RASPBERRYPI
+ tristate "Raspberry Pi 4 Firmware Reset Driver"
+ depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
+ default USB_XHCI_PCI
+ help
+ Raspberry Pi 4's co-processor controls some of the board's HW
+ initialization process, but it's up to Linux to trigger it when
+ relevant. This driver provides a reset controller capable of
+ interfacing with RPi4's co-processor and model these firmware
+ initialization routines as reset lines.
+
config RESET_SCMI
tristate "Reset driver controlled via ARM SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 249ed357c997..16947610cc3b 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o
+obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
diff --git a/drivers/reset/reset-raspberrypi.c b/drivers/reset/reset-raspberrypi.c
new file mode 100644
index 000000000000..02f59c06f69b
--- /dev/null
+++ b/drivers/reset/reset-raspberrypi.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Raspberry Pi 4 firmware reset driver
+ *
+ * Copyright (C) 2020 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+struct rpi_reset {
+ struct reset_controller_dev rcdev;
+ struct rpi_firmware *fw;
+};
+
+static inline struct rpi_reset *to_rpi(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct rpi_reset, rcdev);
+}
+
+static int rpi_reset_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct rpi_reset *priv = to_rpi(rcdev);
+ u32 dev_addr;
+ int ret;
+
+ switch (id) {
+ case RASPBERRYPI_FIRMWARE_RESET_ID_USB:
+ /*
+ * The Raspberry Pi 4 gets its USB functionality from VL805, a
+ * PCIe chip that implements xHCI. After a PCI reset, VL805's
+ * firmware may either be loaded directly from an EEPROM or, if
+ * not present, by the SoC's co-processor, VideoCore. rpi's
+ * VideoCore OS contains both the non public firmware load
+ * logic and the VL805 firmware blob. This triggers the
+ * aforementioned process.
+ *
+ * The pci device address is expected is expected by the
+ * firmware encoded like this:
+ *
+ * PCI_BUS << 20 | PCI_SLOT << 15 | PCI_FUNC << 12
+ *
+ * But since rpi's PCIe is hardwired, we know the address in
+ * advance.
+ */
+ dev_addr = 0x100000;
+ ret = rpi_firmware_property(priv->fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET,
+ &dev_addr, sizeof(dev_addr));
+ if (ret)
+ return ret;
+
+ /* Wait for vl805 to startup */
+ usleep_range(200, 1000);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct reset_control_ops rpi_reset_ops = {
+ .reset = rpi_reset_reset,
+};
+
+static int rpi_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rpi_firmware *fw;
+ struct device_node *np;
+ struct rpi_reset *priv;
+
+ np = of_get_parent(dev->of_node);
+ if (!np) {
+ dev_err(dev, "Missing firmware node\n");
+ return -ENOENT;
+ }
+
+ fw = rpi_firmware_get(np);
+ of_node_put(np);
+ if (!fw)
+ return -EPROBE_DEFER;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+
+ priv->fw = fw;
+ priv->rcdev.owner = THIS_MODULE;
+ priv->rcdev.nr_resets = RASPBERRYPI_FIRMWARE_RESET_NUM_IDS;
+ priv->rcdev.ops = &rpi_reset_ops;
+ priv->rcdev.of_node = dev->of_node;
+
+ return devm_reset_controller_register(dev, &priv->rcdev);
+}
+
+static const struct of_device_id rpi_reset_of_match[] = {
+ { .compatible = "raspberrypi,firmware-reset" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rpi_reset_of_match);
+
+static struct platform_driver rpi_reset_driver = {
+ .probe = rpi_reset_probe,
+ .driver = {
+ .name = "raspberrypi-reset",
+ .of_match_table = rpi_reset_of_match,
+ },
+};
+module_platform_driver(rpi_reset_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
+MODULE_DESCRIPTION("Raspberry Pi 4 firmware reset driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index 0f9d159a1477..747c6cf1d795 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -44,8 +44,6 @@ source "drivers/staging/media/tegra-video/Kconfig"
source "drivers/staging/media/ipu3/Kconfig"
-source "drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig"
-
source "drivers/staging/media/rkisp1/Kconfig"
endif
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index 965a8b0e6cf2..b59571826ba6 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -10,6 +10,5 @@ obj-$(CONFIG_VIDEO_TEGRA) += tegra-video/
obj-$(CONFIG_TEGRA_VDE) += tegra-vde/
obj-$(CONFIG_VIDEO_HANTRO) += hantro/
obj-$(CONFIG_VIDEO_IPU3_IMGU) += ipu3/
-obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0) += phy-rockchip-dphy-rx0/
obj-$(CONFIG_VIDEO_ROCKCHIP_ISP1) += rkisp1/
obj-$(CONFIG_VIDEO_ZORAN) += zoran/
diff --git a/drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig b/drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig
deleted file mode 100644
index fb74df829371..000000000000
--- a/drivers/staging/media/phy-rockchip-dphy-rx0/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-config PHY_ROCKCHIP_DPHY_RX0
- tristate "Rockchip MIPI Synopsys DPHY RX0 driver"
- depends on ARCH_ROCKCHIP || COMPILE_TEST
- select GENERIC_PHY_MIPI_DPHY
- select GENERIC_PHY
- help
- Enable this to support the Rockchip MIPI Synopsys DPHY RX0
- associated to the Rockchip ISP module present in RK3399 SoCs.
-
- To compile this driver as a module, choose M here: the module
- will be called phy-rockchip-dphy-rx0.
diff --git a/drivers/staging/media/phy-rockchip-dphy-rx0/Makefile b/drivers/staging/media/phy-rockchip-dphy-rx0/Makefile
deleted file mode 100644
index 507e5d0593ab..000000000000
--- a/drivers/staging/media/phy-rockchip-dphy-rx0/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PHY_ROCKCHIP_DPHY_RX0) += phy-rockchip-dphy-rx0.o
diff --git a/drivers/staging/media/phy-rockchip-dphy-rx0/TODO b/drivers/staging/media/phy-rockchip-dphy-rx0/TODO
deleted file mode 100644
index ab612e5b27dc..000000000000
--- a/drivers/staging/media/phy-rockchip-dphy-rx0/TODO
+++ /dev/null
@@ -1,6 +0,0 @@
-The main reason for keeping this in staging is because the only driver
-that uses this is rkisp1, which is also in staging. It should be moved together
-with rkisp1.
-
-Please CC patches to Linux Media <linux-media@vger.kernel.org> and
-Helen Koike <helen.koike@collabora.com>.
diff --git a/drivers/thunderbolt/Kconfig b/drivers/thunderbolt/Kconfig
index 354e61c0f2e5..7fc058f81d00 100644
--- a/drivers/thunderbolt/Kconfig
+++ b/drivers/thunderbolt/Kconfig
@@ -16,7 +16,19 @@ menuconfig USB4
To compile this driver a module, choose M here. The module will be
called thunderbolt.
+if USB4
+
+config USB4_DEBUGFS_WRITE
+ bool "Enable write by debugfs to configuration spaces (DANGEROUS)"
+ help
+ Enables writing to device configuration registers through
+ debugfs interface.
+
+ Only enable this if you know what you are doing! Never enable
+ this for production systems or distro kernels.
+
config USB4_KUNIT_TEST
bool "KUnit tests"
depends on KUNIT=y
- depends on USB4=y
+
+endif # USB4
diff --git a/drivers/thunderbolt/Makefile b/drivers/thunderbolt/Makefile
index 4ab5bfad7bfd..571537371072 100644
--- a/drivers/thunderbolt/Makefile
+++ b/drivers/thunderbolt/Makefile
@@ -4,4 +4,6 @@ thunderbolt-objs := nhi.o nhi_ops.o ctl.o tb.o switch.o cap.o path.o tunnel.o ee
thunderbolt-objs += domain.o dma_port.o icm.o property.o xdomain.o lc.o tmu.o usb4.o
thunderbolt-objs += nvm.o retimer.o quirks.o
-obj-${CONFIG_USB4_KUNIT_TEST} += test.o
+thunderbolt-${CONFIG_ACPI} += acpi.o
+thunderbolt-$(CONFIG_DEBUG_FS) += debugfs.o
+thunderbolt-${CONFIG_USB4_KUNIT_TEST} += test.o
diff --git a/drivers/thunderbolt/acpi.c b/drivers/thunderbolt/acpi.c
new file mode 100644
index 000000000000..a5f988a9f948
--- /dev/null
+++ b/drivers/thunderbolt/acpi.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ACPI support
+ *
+ * Copyright (C) 2020, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/acpi.h>
+
+#include "tb.h"
+
+static acpi_status tb_acpi_add_link(acpi_handle handle, u32 level, void *data,
+ void **return_value)
+{
+ struct fwnode_reference_args args;
+ struct fwnode_handle *fwnode;
+ struct tb_nhi *nhi = data;
+ struct acpi_device *adev;
+ struct pci_dev *pdev;
+ struct device *dev;
+ int ret;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+
+ fwnode = acpi_fwnode_handle(adev);
+ ret = fwnode_property_get_reference_args(fwnode, "usb4-host-interface",
+ NULL, 0, 0, &args);
+ if (ret)
+ return AE_OK;
+
+ /* It needs to reference this NHI */
+ if (nhi->pdev->dev.fwnode != args.fwnode)
+ goto out_put;
+
+ /*
+ * Try to find physical device walking upwards to the hierarcy.
+ * We need to do this because the xHCI driver might not yet be
+ * bound so the USB3 SuperSpeed ports are not yet created.
+ */
+ dev = acpi_get_first_physical_node(adev);
+ while (!dev) {
+ adev = adev->parent;
+ if (!adev)
+ break;
+ dev = acpi_get_first_physical_node(adev);
+ }
+
+ if (!dev)
+ goto out_put;
+
+ /*
+ * Check that the device is PCIe. This is because USB3
+ * SuperSpeed ports have this property and they are not power
+ * managed with the xHCI and the SuperSpeed hub so we create the
+ * link from xHCI instead.
+ */
+ while (!dev_is_pci(dev))
+ dev = dev->parent;
+
+ if (!dev)
+ goto out_put;
+
+ /*
+ * Check that this actually matches the type of device we
+ * expect. It should either be xHCI or PCIe root/downstream
+ * port.
+ */
+ pdev = to_pci_dev(dev);
+ if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI ||
+ (pci_is_pcie(pdev) &&
+ (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ||
+ pci_pcie_type(pdev) == PCI_EXP_TYPE_DOWNSTREAM))) {
+ const struct device_link *link;
+
+ link = device_link_add(&pdev->dev, &nhi->pdev->dev,
+ DL_FLAG_AUTOREMOVE_SUPPLIER |
+ DL_FLAG_PM_RUNTIME);
+ if (link) {
+ dev_dbg(&nhi->pdev->dev, "created link from %s\n",
+ dev_name(&pdev->dev));
+ } else {
+ dev_warn(&nhi->pdev->dev, "device link creation from %s failed\n",
+ dev_name(&pdev->dev));
+ }
+ }
+
+out_put:
+ fwnode_handle_put(args.fwnode);
+ return AE_OK;
+}
+
+/**
+ * tb_acpi_add_links() - Add device links based on ACPI description
+ * @nhi: Pointer to NHI
+ *
+ * Goes over ACPI namespace finding tunneled ports that reference to
+ * @nhi ACPI node. For each reference a device link is added. The link
+ * is automatically removed by the driver core.
+ */
+void tb_acpi_add_links(struct tb_nhi *nhi)
+{
+ acpi_status status;
+
+ if (!has_acpi_companion(&nhi->pdev->dev))
+ return;
+
+ /*
+ * Find all devices that have usb4-host-controller interface
+ * property that references to this NHI.
+ */
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, 32,
+ tb_acpi_add_link, NULL, nhi, NULL);
+ if (ACPI_FAILURE(status))
+ dev_warn(&nhi->pdev->dev, "failed to enumerate tunneled ports\n");
+}
diff --git a/drivers/thunderbolt/cap.c b/drivers/thunderbolt/cap.c
index 19db6cdc5b70..6f571e912cf2 100644
--- a/drivers/thunderbolt/cap.c
+++ b/drivers/thunderbolt/cap.c
@@ -15,14 +15,6 @@
#define VSE_CAP_OFFSET_MAX 0xffff
#define TMU_ACCESS_EN BIT(20)
-struct tb_cap_any {
- union {
- struct tb_cap_basic basic;
- struct tb_cap_extended_short extended_short;
- struct tb_cap_extended_long extended_long;
- };
-} __packed;
-
static int tb_port_enable_tmu(struct tb_port *port, bool enable)
{
struct tb_switch *sw = port->sw;
@@ -67,23 +59,50 @@ static void tb_port_dummy_read(struct tb_port *port)
}
}
+/**
+ * tb_port_next_cap() - Return next capability in the linked list
+ * @port: Port to find the capability for
+ * @offset: Previous capability offset (%0 for start)
+ *
+ * Returns dword offset of the next capability in port config space
+ * capability list and returns it. Passing %0 returns the first entry in
+ * the capability list. If no next capability is found returns %0. In case
+ * of failure returns negative errno.
+ */
+int tb_port_next_cap(struct tb_port *port, unsigned int offset)
+{
+ struct tb_cap_any header;
+ int ret;
+
+ if (!offset)
+ return port->config.first_cap_offset;
+
+ ret = tb_port_read(port, &header, TB_CFG_PORT, offset, 1);
+ if (ret)
+ return ret;
+
+ return header.basic.next;
+}
+
static int __tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap)
{
- u32 offset = 1;
+ int offset = 0;
do {
struct tb_cap_any header;
int ret;
+ offset = tb_port_next_cap(port, offset);
+ if (offset < 0)
+ return offset;
+
ret = tb_port_read(port, &header, TB_CFG_PORT, offset, 1);
if (ret)
return ret;
if (header.basic.cap == cap)
return offset;
-
- offset = header.basic.next;
- } while (offset);
+ } while (offset > 0);
return -ENOENT;
}
@@ -114,6 +133,50 @@ int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap)
}
/**
+ * tb_switch_next_cap() - Return next capability in the linked list
+ * @sw: Switch to find the capability for
+ * @offset: Previous capability offset (%0 for start)
+ *
+ * Finds dword offset of the next capability in router config space
+ * capability list and returns it. Passing %0 returns the first entry in
+ * the capability list. If no next capability is found returns %0. In case
+ * of failure returns negative errno.
+ */
+int tb_switch_next_cap(struct tb_switch *sw, unsigned int offset)
+{
+ struct tb_cap_any header;
+ int ret;
+
+ if (!offset)
+ return sw->config.first_cap_offset;
+
+ ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, offset, 2);
+ if (ret)
+ return ret;
+
+ switch (header.basic.cap) {
+ case TB_SWITCH_CAP_TMU:
+ ret = header.basic.next;
+ break;
+
+ case TB_SWITCH_CAP_VSE:
+ if (!header.extended_short.length)
+ ret = header.extended_long.next;
+ else
+ ret = header.extended_short.next;
+ break;
+
+ default:
+ tb_sw_dbg(sw, "unknown capability %#x at %#x\n",
+ header.basic.cap, offset);
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret >= VSE_CAP_OFFSET_MAX ? 0 : ret;
+}
+
+/**
* tb_switch_find_cap() - Find switch capability
* @sw Switch to find the capability for
* @cap: Capability to look
@@ -124,21 +187,23 @@ int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap)
*/
int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap)
{
- int offset = sw->config.first_cap_offset;
+ int offset = 0;
- while (offset > 0 && offset < CAP_OFFSET_MAX) {
+ do {
struct tb_cap_any header;
int ret;
+ offset = tb_switch_next_cap(sw, offset);
+ if (offset < 0)
+ return offset;
+
ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, offset, 1);
if (ret)
return ret;
if (header.basic.cap == cap)
return offset;
-
- offset = header.basic.next;
- }
+ } while (offset);
return -ENOENT;
}
@@ -155,37 +220,24 @@ int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap)
*/
int tb_switch_find_vse_cap(struct tb_switch *sw, enum tb_switch_vse_cap vsec)
{
- struct tb_cap_any header;
- int offset;
+ int offset = 0;
- offset = tb_switch_find_cap(sw, TB_SWITCH_CAP_VSE);
- if (offset < 0)
- return offset;
-
- while (offset > 0 && offset < VSE_CAP_OFFSET_MAX) {
+ do {
+ struct tb_cap_any header;
int ret;
- ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, offset, 2);
+ offset = tb_switch_next_cap(sw, offset);
+ if (offset < 0)
+ return offset;
+
+ ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, offset, 1);
if (ret)
return ret;
- /*
- * Extended vendor specific capabilities come in two
- * flavors: short and long. The latter is used when
- * offset is over 0xff.
- */
- if (offset >= CAP_OFFSET_MAX) {
- if (header.extended_long.vsec_id == vsec)
- return offset;
- offset = header.extended_long.next;
- } else {
- if (header.extended_short.vsec_id == vsec)
- return offset;
- if (!header.extended_short.length)
- return -ENOENT;
- offset = header.extended_short.next;
- }
- }
+ if (header.extended_short.cap == TB_SWITCH_CAP_VSE &&
+ header.extended_short.vsec_id == vsec)
+ return offset;
+ } while (offset);
return -ENOENT;
}
diff --git a/drivers/thunderbolt/ctl.c b/drivers/thunderbolt/ctl.c
index 394a23ce6ca4..9894b8f63064 100644
--- a/drivers/thunderbolt/ctl.c
+++ b/drivers/thunderbolt/ctl.c
@@ -219,6 +219,7 @@ static int check_config_address(struct tb_cfg_address addr,
static struct tb_cfg_result decode_error(const struct ctl_pkg *response)
{
struct cfg_error_pkg *pkg = response->buffer;
+ struct tb_ctl *ctl = response->ctl;
struct tb_cfg_result res = { 0 };
res.response_route = tb_cfg_get_route(&pkg->header);
res.response_port = 0;
@@ -227,9 +228,13 @@ static struct tb_cfg_result decode_error(const struct ctl_pkg *response)
if (res.err)
return res;
- WARN(pkg->zero1, "pkg->zero1 is %#x\n", pkg->zero1);
- WARN(pkg->zero2, "pkg->zero1 is %#x\n", pkg->zero1);
- WARN(pkg->zero3, "pkg->zero1 is %#x\n", pkg->zero1);
+ if (pkg->zero1)
+ tb_ctl_warn(ctl, "pkg->zero1 is %#x\n", pkg->zero1);
+ if (pkg->zero2)
+ tb_ctl_warn(ctl, "pkg->zero2 is %#x\n", pkg->zero2);
+ if (pkg->zero3)
+ tb_ctl_warn(ctl, "pkg->zero3 is %#x\n", pkg->zero3);
+
res.err = 1;
res.tb_error = pkg->error;
res.response_port = pkg->port;
@@ -266,9 +271,8 @@ static void tb_cfg_print_error(struct tb_ctl *ctl,
* Invalid cfg_space/offset/length combination in
* cfg_read/cfg_write.
*/
- tb_ctl_WARN(ctl,
- "CFG_ERROR(%llx:%x): Invalid config space or offset\n",
- res->response_route, res->response_port);
+ tb_ctl_dbg(ctl, "%llx:%x: invalid config space or offset\n",
+ res->response_route, res->response_port);
return;
case TB_CFG_ERROR_NO_SUCH_PORT:
/*
@@ -283,6 +287,10 @@ static void tb_cfg_print_error(struct tb_ctl *ctl,
tb_ctl_WARN(ctl, "CFG_ERROR(%llx:%x): Route contains a loop\n",
res->response_route, res->response_port);
return;
+ case TB_CFG_ERROR_LOCK:
+ tb_ctl_warn(ctl, "%llx:%x: downstream port is locked\n",
+ res->response_route, res->response_port);
+ return;
default:
/* 5,6,7,9 and 11 are also valid error codes */
tb_ctl_WARN(ctl, "CFG_ERROR(%llx:%x): Unknown error\n",
@@ -951,6 +959,9 @@ static int tb_cfg_get_error(struct tb_ctl *ctl, enum tb_cfg_space space,
return -ENODEV;
tb_cfg_print_error(ctl, res);
+
+ if (res->tb_error == TB_CFG_ERROR_LOCK)
+ return -EACCES;
return -EIO;
}
diff --git a/drivers/thunderbolt/debugfs.c b/drivers/thunderbolt/debugfs.c
new file mode 100644
index 000000000000..3680b2784ea1
--- /dev/null
+++ b/drivers/thunderbolt/debugfs.c
@@ -0,0 +1,701 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Debugfs interface
+ *
+ * Copyright (C) 2020, Intel Corporation
+ * Authors: Gil Fine <gil.fine@intel.com>
+ * Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/debugfs.h>
+#include <linux/pm_runtime.h>
+
+#include "tb.h"
+
+#define PORT_CAP_PCIE_LEN 1
+#define PORT_CAP_POWER_LEN 2
+#define PORT_CAP_LANE_LEN 3
+#define PORT_CAP_USB3_LEN 5
+#define PORT_CAP_DP_LEN 8
+#define PORT_CAP_TMU_LEN 8
+#define PORT_CAP_BASIC_LEN 9
+#define PORT_CAP_USB4_LEN 20
+
+#define SWITCH_CAP_TMU_LEN 26
+#define SWITCH_CAP_BASIC_LEN 27
+
+#define PATH_LEN 2
+
+#define COUNTER_SET_LEN 3
+
+#define DEBUGFS_ATTR(__space, __write) \
+static int __space ## _open(struct inode *inode, struct file *file) \
+{ \
+ return single_open(file, __space ## _show, inode->i_private); \
+} \
+ \
+static const struct file_operations __space ## _fops = { \
+ .owner = THIS_MODULE, \
+ .open = __space ## _open, \
+ .release = single_release, \
+ .read = seq_read, \
+ .write = __write, \
+ .llseek = seq_lseek, \
+}
+
+#define DEBUGFS_ATTR_RO(__space) \
+ DEBUGFS_ATTR(__space, NULL)
+
+#define DEBUGFS_ATTR_RW(__space) \
+ DEBUGFS_ATTR(__space, __space ## _write)
+
+static struct dentry *tb_debugfs_root;
+
+static void *validate_and_copy_from_user(const void __user *user_buf,
+ size_t *count)
+{
+ size_t nbytes;
+ void *buf;
+
+ if (!*count)
+ return ERR_PTR(-EINVAL);
+
+ if (!access_ok(user_buf, *count))
+ return ERR_PTR(-EFAULT);
+
+ buf = (void *)get_zeroed_page(GFP_KERNEL);
+ if (!buf)
+ return ERR_PTR(-ENOMEM);
+
+ nbytes = min_t(size_t, *count, PAGE_SIZE);
+ if (copy_from_user(buf, user_buf, nbytes)) {
+ free_page((unsigned long)buf);
+ return ERR_PTR(-EFAULT);
+ }
+
+ *count = nbytes;
+ return buf;
+}
+
+static bool parse_line(char **line, u32 *offs, u32 *val, int short_fmt_len,
+ int long_fmt_len)
+{
+ char *token;
+ u32 v[5];
+ int ret;
+
+ token = strsep(line, "\n");
+ if (!token)
+ return false;
+
+ /*
+ * For Adapter/Router configuration space:
+ * Short format is: offset value\n
+ * v[0] v[1]
+ * Long format as produced from the read side:
+ * offset relative_offset cap_id vs_cap_id value\n
+ * v[0] v[1] v[2] v[3] v[4]
+ *
+ * For Counter configuration space:
+ * Short format is: offset\n
+ * v[0]
+ * Long format as produced from the read side:
+ * offset relative_offset counter_id value\n
+ * v[0] v[1] v[2] v[3]
+ */
+ ret = sscanf(token, "%i %i %i %i %i", &v[0], &v[1], &v[2], &v[3], &v[4]);
+ /* In case of Counters, clear counter, "val" content is NA */
+ if (ret == short_fmt_len) {
+ *offs = v[0];
+ *val = v[short_fmt_len - 1];
+ return true;
+ } else if (ret == long_fmt_len) {
+ *offs = v[0];
+ *val = v[long_fmt_len - 1];
+ return true;
+ }
+
+ return false;
+}
+
+#if IS_ENABLED(CONFIG_USB4_DEBUGFS_WRITE)
+static ssize_t regs_write(struct tb_switch *sw, struct tb_port *port,
+ const char __user *user_buf, size_t count,
+ loff_t *ppos)
+{
+ struct tb *tb = sw->tb;
+ char *line, *buf;
+ u32 val, offset;
+ int ret = 0;
+
+ buf = validate_and_copy_from_user(user_buf, &count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ pm_runtime_get_sync(&sw->dev);
+
+ if (mutex_lock_interruptible(&tb->lock)) {
+ ret = -ERESTARTSYS;
+ goto out;
+ }
+
+ /* User did hardware changes behind the driver's back */
+ add_taint(TAINT_USER, LOCKDEP_STILL_OK);
+
+ line = buf;
+ while (parse_line(&line, &offset, &val, 2, 5)) {
+ if (port)
+ ret = tb_port_write(port, &val, TB_CFG_PORT, offset, 1);
+ else
+ ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, offset, 1);
+ if (ret)
+ break;
+ }
+
+ mutex_unlock(&tb->lock);
+
+out:
+ pm_runtime_mark_last_busy(&sw->dev);
+ pm_runtime_put_autosuspend(&sw->dev);
+ free_page((unsigned long)buf);
+
+ return ret < 0 ? ret : count;
+}
+
+static ssize_t port_regs_write(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct tb_port *port = s->private;
+
+ return regs_write(port->sw, port, user_buf, count, ppos);
+}
+
+static ssize_t switch_regs_write(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct tb_switch *sw = s->private;
+
+ return regs_write(sw, NULL, user_buf, count, ppos);
+}
+#define DEBUGFS_MODE 0600
+#else
+#define port_regs_write NULL
+#define switch_regs_write NULL
+#define DEBUGFS_MODE 0400
+#endif
+
+static int port_clear_all_counters(struct tb_port *port)
+{
+ u32 *buf;
+ int ret;
+
+ buf = kcalloc(COUNTER_SET_LEN * port->config.max_counters, sizeof(u32),
+ GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = tb_port_write(port, buf, TB_CFG_COUNTERS, 0,
+ COUNTER_SET_LEN * port->config.max_counters);
+ kfree(buf);
+
+ return ret;
+}
+
+static ssize_t counters_write(struct file *file, const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct tb_port *port = s->private;
+ struct tb_switch *sw = port->sw;
+ struct tb *tb = port->sw->tb;
+ char *buf;
+ int ret;
+
+ buf = validate_and_copy_from_user(user_buf, &count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ pm_runtime_get_sync(&sw->dev);
+
+ if (mutex_lock_interruptible(&tb->lock)) {
+ ret = -ERESTARTSYS;
+ goto out;
+ }
+
+ /* If written delimiter only, clear all counters in one shot */
+ if (buf[0] == '\n') {
+ ret = port_clear_all_counters(port);
+ } else {
+ char *line = buf;
+ u32 val, offset;
+
+ ret = -EINVAL;
+ while (parse_line(&line, &offset, &val, 1, 4)) {
+ ret = tb_port_write(port, &val, TB_CFG_COUNTERS,
+ offset, 1);
+ if (ret)
+ break;
+ }
+ }
+
+ mutex_unlock(&tb->lock);
+
+out:
+ pm_runtime_mark_last_busy(&sw->dev);
+ pm_runtime_put_autosuspend(&sw->dev);
+ free_page((unsigned long)buf);
+
+ return ret < 0 ? ret : count;
+}
+
+static void cap_show(struct seq_file *s, struct tb_switch *sw,
+ struct tb_port *port, unsigned int cap, u8 cap_id,
+ u8 vsec_id, int length)
+{
+ int ret, offset = 0;
+
+ while (length > 0) {
+ int i, dwords = min(length, TB_MAX_CONFIG_RW_LENGTH);
+ u32 data[TB_MAX_CONFIG_RW_LENGTH];
+
+ if (port)
+ ret = tb_port_read(port, data, TB_CFG_PORT, cap + offset,
+ dwords);
+ else
+ ret = tb_sw_read(sw, data, TB_CFG_SWITCH, cap + offset, dwords);
+ if (ret) {
+ seq_printf(s, "0x%04x <not accessible>\n",
+ cap + offset);
+ if (dwords > 1)
+ seq_printf(s, "0x%04x ...\n", cap + offset + 1);
+ return;
+ }
+
+ for (i = 0; i < dwords; i++) {
+ seq_printf(s, "0x%04x %4d 0x%02x 0x%02x 0x%08x\n",
+ cap + offset + i, offset + i,
+ cap_id, vsec_id, data[i]);
+ }
+
+ length -= dwords;
+ offset += dwords;
+ }
+}
+
+static void port_cap_show(struct tb_port *port, struct seq_file *s,
+ unsigned int cap)
+{
+ struct tb_cap_any header;
+ u8 vsec_id = 0;
+ size_t length;
+ int ret;
+
+ ret = tb_port_read(port, &header, TB_CFG_PORT, cap, 1);
+ if (ret) {
+ seq_printf(s, "0x%04x <capability read failed>\n", cap);
+ return;
+ }
+
+ switch (header.basic.cap) {
+ case TB_PORT_CAP_PHY:
+ length = PORT_CAP_LANE_LEN;
+ break;
+
+ case TB_PORT_CAP_TIME1:
+ length = PORT_CAP_TMU_LEN;
+ break;
+
+ case TB_PORT_CAP_POWER:
+ length = PORT_CAP_POWER_LEN;
+ break;
+
+ case TB_PORT_CAP_ADAP:
+ if (tb_port_is_pcie_down(port) || tb_port_is_pcie_up(port)) {
+ length = PORT_CAP_PCIE_LEN;
+ } else if (tb_port_is_dpin(port) || tb_port_is_dpout(port)) {
+ length = PORT_CAP_DP_LEN;
+ } else if (tb_port_is_usb3_down(port) ||
+ tb_port_is_usb3_up(port)) {
+ length = PORT_CAP_USB3_LEN;
+ } else {
+ seq_printf(s, "0x%04x <unsupported capability 0x%02x>\n",
+ cap, header.basic.cap);
+ return;
+ }
+ break;
+
+ case TB_PORT_CAP_VSE:
+ if (!header.extended_short.length) {
+ ret = tb_port_read(port, (u32 *)&header + 1, TB_CFG_PORT,
+ cap + 1, 1);
+ if (ret) {
+ seq_printf(s, "0x%04x <capability read failed>\n",
+ cap + 1);
+ return;
+ }
+ length = header.extended_long.length;
+ vsec_id = header.extended_short.vsec_id;
+ } else {
+ length = header.extended_short.length;
+ vsec_id = header.extended_short.vsec_id;
+ /*
+ * Ice Lake and Tiger Lake do not implement the
+ * full length of the capability, only first 32
+ * dwords so hard-code it here.
+ */
+ if (!vsec_id &&
+ (tb_switch_is_ice_lake(port->sw) ||
+ tb_switch_is_tiger_lake(port->sw)))
+ length = 32;
+ }
+ break;
+
+ case TB_PORT_CAP_USB4:
+ length = PORT_CAP_USB4_LEN;
+ break;
+
+ default:
+ seq_printf(s, "0x%04x <unsupported capability 0x%02x>\n",
+ cap, header.basic.cap);
+ return;
+ }
+
+ cap_show(s, NULL, port, cap, header.basic.cap, vsec_id, length);
+}
+
+static void port_caps_show(struct tb_port *port, struct seq_file *s)
+{
+ int cap;
+
+ cap = tb_port_next_cap(port, 0);
+ while (cap > 0) {
+ port_cap_show(port, s, cap);
+ cap = tb_port_next_cap(port, cap);
+ }
+}
+
+static int port_basic_regs_show(struct tb_port *port, struct seq_file *s)
+{
+ u32 data[PORT_CAP_BASIC_LEN];
+ int ret, i;
+
+ ret = tb_port_read(port, data, TB_CFG_PORT, 0, ARRAY_SIZE(data));
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(data); i++)
+ seq_printf(s, "0x%04x %4d 0x00 0x00 0x%08x\n", i, i, data[i]);
+
+ return 0;
+}
+
+static int port_regs_show(struct seq_file *s, void *not_used)
+{
+ struct tb_port *port = s->private;
+ struct tb_switch *sw = port->sw;
+ struct tb *tb = sw->tb;
+ int ret;
+
+ pm_runtime_get_sync(&sw->dev);
+
+ if (mutex_lock_interruptible(&tb->lock)) {
+ ret = -ERESTARTSYS;
+ goto out_rpm_put;
+ }
+
+ seq_puts(s, "# offset relative_offset cap_id vs_cap_id value\n");
+
+ ret = port_basic_regs_show(port, s);
+ if (ret)
+ goto out_unlock;
+
+ port_caps_show(port, s);
+
+out_unlock:
+ mutex_unlock(&tb->lock);
+out_rpm_put:
+ pm_runtime_mark_last_busy(&sw->dev);
+ pm_runtime_put_autosuspend(&sw->dev);
+
+ return ret;
+}
+DEBUGFS_ATTR_RW(port_regs);
+
+static void switch_cap_show(struct tb_switch *sw, struct seq_file *s,
+ unsigned int cap)
+{
+ struct tb_cap_any header;
+ int ret, length;
+ u8 vsec_id = 0;
+
+ ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, cap, 1);
+ if (ret) {
+ seq_printf(s, "0x%04x <capability read failed>\n", cap);
+ return;
+ }
+
+ if (header.basic.cap == TB_SWITCH_CAP_VSE) {
+ if (!header.extended_short.length) {
+ ret = tb_sw_read(sw, (u32 *)&header + 1, TB_CFG_SWITCH,
+ cap + 1, 1);
+ if (ret) {
+ seq_printf(s, "0x%04x <capability read failed>\n",
+ cap + 1);
+ return;
+ }
+ length = header.extended_long.length;
+ } else {
+ length = header.extended_short.length;
+ }
+ vsec_id = header.extended_short.vsec_id;
+ } else {
+ if (header.basic.cap == TB_SWITCH_CAP_TMU) {
+ length = SWITCH_CAP_TMU_LEN;
+ } else {
+ seq_printf(s, "0x%04x <unknown capability 0x%02x>\n",
+ cap, header.basic.cap);
+ return;
+ }
+ }
+
+ cap_show(s, sw, NULL, cap, header.basic.cap, vsec_id, length);
+}
+
+static void switch_caps_show(struct tb_switch *sw, struct seq_file *s)
+{
+ int cap;
+
+ cap = tb_switch_next_cap(sw, 0);
+ while (cap > 0) {
+ switch_cap_show(sw, s, cap);
+ cap = tb_switch_next_cap(sw, cap);
+ }
+}
+
+static int switch_basic_regs_show(struct tb_switch *sw, struct seq_file *s)
+{
+ u32 data[SWITCH_CAP_BASIC_LEN];
+ size_t dwords;
+ int ret, i;
+
+ /* Only USB4 has the additional registers */
+ if (tb_switch_is_usb4(sw))
+ dwords = ARRAY_SIZE(data);
+ else
+ dwords = 7;
+
+ ret = tb_sw_read(sw, data, TB_CFG_SWITCH, 0, dwords);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < dwords; i++)
+ seq_printf(s, "0x%04x %4d 0x00 0x00 0x%08x\n", i, i, data[i]);
+
+ return 0;
+}
+
+static int switch_regs_show(struct seq_file *s, void *not_used)
+{
+ struct tb_switch *sw = s->private;
+ struct tb *tb = sw->tb;
+ int ret;
+
+ pm_runtime_get_sync(&sw->dev);
+
+ if (mutex_lock_interruptible(&tb->lock)) {
+ ret = -ERESTARTSYS;
+ goto out_rpm_put;
+ }
+
+ seq_puts(s, "# offset relative_offset cap_id vs_cap_id value\n");
+
+ ret = switch_basic_regs_show(sw, s);
+ if (ret)
+ goto out_unlock;
+
+ switch_caps_show(sw, s);
+
+out_unlock:
+ mutex_unlock(&tb->lock);
+out_rpm_put:
+ pm_runtime_mark_last_busy(&sw->dev);
+ pm_runtime_put_autosuspend(&sw->dev);
+
+ return ret;
+}
+DEBUGFS_ATTR_RW(switch_regs);
+
+static int path_show_one(struct tb_port *port, struct seq_file *s, int hopid)
+{
+ u32 data[PATH_LEN];
+ int ret, i;
+
+ ret = tb_port_read(port, data, TB_CFG_HOPS, hopid * PATH_LEN,
+ ARRAY_SIZE(data));
+ if (ret) {
+ seq_printf(s, "0x%04x <not accessible>\n", hopid * PATH_LEN);
+ return ret;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data); i++) {
+ seq_printf(s, "0x%04x %4d 0x%02x 0x%08x\n",
+ hopid * PATH_LEN + i, i, hopid, data[i]);
+ }
+
+ return 0;
+}
+
+static int path_show(struct seq_file *s, void *not_used)
+{
+ struct tb_port *port = s->private;
+ struct tb_switch *sw = port->sw;
+ struct tb *tb = sw->tb;
+ int start, i, ret = 0;
+
+ pm_runtime_get_sync(&sw->dev);
+
+ if (mutex_lock_interruptible(&tb->lock)) {
+ ret = -ERESTARTSYS;
+ goto out_rpm_put;
+ }
+
+ seq_puts(s, "# offset relative_offset in_hop_id value\n");
+
+ /* NHI and lane adapters have entry for path 0 */
+ if (tb_port_is_null(port) || tb_port_is_nhi(port)) {
+ ret = path_show_one(port, s, 0);
+ if (ret)
+ goto out_unlock;
+ }
+
+ start = tb_port_is_nhi(port) ? 1 : TB_PATH_MIN_HOPID;
+
+ for (i = start; i <= port->config.max_in_hop_id; i++) {
+ ret = path_show_one(port, s, i);
+ if (ret)
+ break;
+ }
+
+out_unlock:
+ mutex_unlock(&tb->lock);
+out_rpm_put:
+ pm_runtime_mark_last_busy(&sw->dev);
+ pm_runtime_put_autosuspend(&sw->dev);
+
+ return ret;
+}
+DEBUGFS_ATTR_RO(path);
+
+static int counter_set_regs_show(struct tb_port *port, struct seq_file *s,
+ int counter)
+{
+ u32 data[COUNTER_SET_LEN];
+ int ret, i;
+
+ ret = tb_port_read(port, data, TB_CFG_COUNTERS,
+ counter * COUNTER_SET_LEN, ARRAY_SIZE(data));
+ if (ret) {
+ seq_printf(s, "0x%04x <not accessible>\n",
+ counter * COUNTER_SET_LEN);
+ return ret;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data); i++) {
+ seq_printf(s, "0x%04x %4d 0x%02x 0x%08x\n",
+ counter * COUNTER_SET_LEN + i, i, counter, data[i]);
+ }
+
+ return 0;
+}
+
+static int counters_show(struct seq_file *s, void *not_used)
+{
+ struct tb_port *port = s->private;
+ struct tb_switch *sw = port->sw;
+ struct tb *tb = sw->tb;
+ int i, ret = 0;
+
+ pm_runtime_get_sync(&sw->dev);
+
+ if (mutex_lock_interruptible(&tb->lock)) {
+ ret = -ERESTARTSYS;
+ goto out;
+ }
+
+ seq_puts(s, "# offset relative_offset counter_id value\n");
+
+ for (i = 0; i < port->config.max_counters; i++) {
+ ret = counter_set_regs_show(port, s, i);
+ if (ret)
+ break;
+ }
+
+ mutex_unlock(&tb->lock);
+
+out:
+ pm_runtime_mark_last_busy(&sw->dev);
+ pm_runtime_put_autosuspend(&sw->dev);
+
+ return ret;
+}
+DEBUGFS_ATTR_RW(counters);
+
+/**
+ * tb_switch_debugfs_init() - Add debugfs entries for router
+ * @sw: Pointer to the router
+ *
+ * Adds debugfs directories and files for given router.
+ */
+void tb_switch_debugfs_init(struct tb_switch *sw)
+{
+ struct dentry *debugfs_dir;
+ struct tb_port *port;
+
+ debugfs_dir = debugfs_create_dir(dev_name(&sw->dev), tb_debugfs_root);
+ sw->debugfs_dir = debugfs_dir;
+ debugfs_create_file("regs", DEBUGFS_MODE, debugfs_dir, sw,
+ &switch_regs_fops);
+
+ tb_switch_for_each_port(sw, port) {
+ struct dentry *debugfs_dir;
+ char dir_name[10];
+
+ if (port->disabled)
+ continue;
+ if (port->config.type == TB_TYPE_INACTIVE)
+ continue;
+
+ snprintf(dir_name, sizeof(dir_name), "port%d", port->port);
+ debugfs_dir = debugfs_create_dir(dir_name, sw->debugfs_dir);
+ debugfs_create_file("regs", DEBUGFS_MODE, debugfs_dir,
+ port, &port_regs_fops);
+ debugfs_create_file("path", 0400, debugfs_dir, port,
+ &path_fops);
+ if (port->config.counters_support)
+ debugfs_create_file("counters", 0600, debugfs_dir, port,
+ &counters_fops);
+ }
+}
+
+/**
+ * tb_switch_debugfs_remove() - Remove all router debugfs entries
+ * @sw: Pointer to the router
+ *
+ * Removes all previously added debugfs entries under this router.
+ */
+void tb_switch_debugfs_remove(struct tb_switch *sw)
+{
+ debugfs_remove_recursive(sw->debugfs_dir);
+}
+
+void tb_debugfs_init(void)
+{
+ tb_debugfs_root = debugfs_create_dir("thunderbolt", NULL);
+}
+
+void tb_debugfs_exit(void)
+{
+ debugfs_remove_recursive(tb_debugfs_root);
+}
diff --git a/drivers/thunderbolt/domain.c b/drivers/thunderbolt/domain.c
index bba4cbfa9759..f0de94f7acbf 100644
--- a/drivers/thunderbolt/domain.c
+++ b/drivers/thunderbolt/domain.c
@@ -275,7 +275,7 @@ static struct attribute *domain_attrs[] = {
static umode_t domain_attr_is_visible(struct kobject *kobj,
struct attribute *attr, int n)
{
- struct device *dev = container_of(kobj, struct device, kobj);
+ struct device *dev = kobj_to_dev(kobj);
struct tb *tb = container_of(dev, struct tb, dev);
if (attr == &dev_attr_boot_acl.attr) {
@@ -455,6 +455,8 @@ int tb_domain_add(struct tb *tb)
/* This starts event processing */
mutex_unlock(&tb->lock);
+ device_init_wakeup(&tb->dev, true);
+
pm_runtime_no_callbacks(&tb->dev);
pm_runtime_set_active(&tb->dev);
pm_runtime_enable(&tb->dev);
@@ -544,6 +546,33 @@ int tb_domain_suspend(struct tb *tb)
return tb->cm_ops->suspend ? tb->cm_ops->suspend(tb) : 0;
}
+int tb_domain_freeze_noirq(struct tb *tb)
+{
+ int ret = 0;
+
+ mutex_lock(&tb->lock);
+ if (tb->cm_ops->freeze_noirq)
+ ret = tb->cm_ops->freeze_noirq(tb);
+ if (!ret)
+ tb_ctl_stop(tb->ctl);
+ mutex_unlock(&tb->lock);
+
+ return ret;
+}
+
+int tb_domain_thaw_noirq(struct tb *tb)
+{
+ int ret = 0;
+
+ mutex_lock(&tb->lock);
+ tb_ctl_start(tb->ctl);
+ if (tb->cm_ops->thaw_noirq)
+ ret = tb->cm_ops->thaw_noirq(tb);
+ mutex_unlock(&tb->lock);
+
+ return ret;
+}
+
void tb_domain_complete(struct tb *tb)
{
if (tb->cm_ops->complete)
@@ -798,12 +827,23 @@ int tb_domain_init(void)
{
int ret;
+ tb_test_init();
+
+ tb_debugfs_init();
ret = tb_xdomain_init();
if (ret)
- return ret;
+ goto err_debugfs;
ret = bus_register(&tb_bus_type);
if (ret)
- tb_xdomain_exit();
+ goto err_xdomain;
+
+ return 0;
+
+err_xdomain:
+ tb_xdomain_exit();
+err_debugfs:
+ tb_debugfs_exit();
+ tb_test_exit();
return ret;
}
@@ -814,4 +854,6 @@ void tb_domain_exit(void)
ida_destroy(&tb_domain_ida);
tb_nvm_exit();
tb_xdomain_exit();
+ tb_debugfs_exit();
+ tb_test_exit();
}
diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c
index ffcc8c3459e5..b51fc3f62b1f 100644
--- a/drivers/thunderbolt/icm.c
+++ b/drivers/thunderbolt/icm.c
@@ -1635,11 +1635,14 @@ static void icm_icl_rtd3_veto(struct tb *tb, const struct icm_pkg_header *hdr)
static bool icm_tgl_is_supported(struct tb *tb)
{
+ u32 val;
+
/*
* If the firmware is not running use software CM. This platform
* should fully support both.
*/
- return icm_firmware_running(tb->nhi);
+ val = ioread32(tb->nhi->iobase + REG_FW_STS);
+ return !!(val & REG_FW_STS_NVM_AUTH_DONE);
}
static void icm_handle_notification(struct work_struct *work)
diff --git a/drivers/thunderbolt/lc.c b/drivers/thunderbolt/lc.c
index 19be627d090f..41e6c738f6c8 100644
--- a/drivers/thunderbolt/lc.c
+++ b/drivers/thunderbolt/lc.c
@@ -45,7 +45,7 @@ static int find_port_lc_cap(struct tb_port *port)
return sw->cap_lc + start + phys * size;
}
-static int tb_lc_configure_lane(struct tb_port *port, bool configure)
+static int tb_lc_set_port_configured(struct tb_port *port, bool configured)
{
bool upstream = tb_is_upstream_port(port);
struct tb_switch *sw = port->sw;
@@ -69,7 +69,7 @@ static int tb_lc_configure_lane(struct tb_port *port, bool configure)
else
lane = TB_LC_SX_CTRL_L2C;
- if (configure) {
+ if (configured) {
ctrl |= lane;
if (upstream)
ctrl |= TB_LC_SX_CTRL_UPSTREAM;
@@ -83,55 +83,146 @@ static int tb_lc_configure_lane(struct tb_port *port, bool configure)
}
/**
- * tb_lc_configure_link() - Let LC know about configured link
- * @sw: Switch that is being added
+ * tb_lc_configure_port() - Let LC know about configured port
+ * @port: Port that is set as configured
*
- * Informs LC of both parent switch and @sw that there is established
- * link between the two.
+ * Sets the port configured for power management purposes.
*/
-int tb_lc_configure_link(struct tb_switch *sw)
+int tb_lc_configure_port(struct tb_port *port)
{
- struct tb_port *up, *down;
- int ret;
+ return tb_lc_set_port_configured(port, true);
+}
+
+/**
+ * tb_lc_unconfigure_port() - Let LC know about unconfigured port
+ * @port: Port that is set as configured
+ *
+ * Sets the port unconfigured for power management purposes.
+ */
+void tb_lc_unconfigure_port(struct tb_port *port)
+{
+ tb_lc_set_port_configured(port, false);
+}
- if (!tb_route(sw) || tb_switch_is_icm(sw))
+static int tb_lc_set_xdomain_configured(struct tb_port *port, bool configure)
+{
+ struct tb_switch *sw = port->sw;
+ u32 ctrl, lane;
+ int cap, ret;
+
+ if (sw->generation < 2)
return 0;
- up = tb_upstream_port(sw);
- down = tb_port_at(tb_route(sw), tb_to_switch(sw->dev.parent));
+ cap = find_port_lc_cap(port);
+ if (cap < 0)
+ return cap;
- /* Configure parent link toward this switch */
- ret = tb_lc_configure_lane(down, true);
+ ret = tb_sw_read(sw, &ctrl, TB_CFG_SWITCH, cap + TB_LC_SX_CTRL, 1);
if (ret)
return ret;
- /* Configure upstream link from this switch to the parent */
- ret = tb_lc_configure_lane(up, true);
+ /* Resolve correct lane */
+ if (port->port % 2)
+ lane = TB_LC_SX_CTRL_L1D;
+ else
+ lane = TB_LC_SX_CTRL_L2D;
+
+ if (configure)
+ ctrl |= lane;
+ else
+ ctrl &= ~lane;
+
+ return tb_sw_write(sw, &ctrl, TB_CFG_SWITCH, cap + TB_LC_SX_CTRL, 1);
+}
+
+/**
+ * tb_lc_configure_xdomain() - Inform LC that the link is XDomain
+ * @port: Switch downstream port connected to another host
+ *
+ * Sets the lane configured for XDomain accordingly so that the LC knows
+ * about this. Returns %0 in success and negative errno in failure.
+ */
+int tb_lc_configure_xdomain(struct tb_port *port)
+{
+ return tb_lc_set_xdomain_configured(port, true);
+}
+
+/**
+ * tb_lc_unconfigure_xdomain() - Unconfigure XDomain from port
+ * @port: Switch downstream port that was connected to another host
+ *
+ * Unsets the lane XDomain configuration.
+ */
+void tb_lc_unconfigure_xdomain(struct tb_port *port)
+{
+ tb_lc_set_xdomain_configured(port, false);
+}
+
+static int tb_lc_set_wake_one(struct tb_switch *sw, unsigned int offset,
+ unsigned int flags)
+{
+ u32 ctrl;
+ int ret;
+
+ /*
+ * Enable wake on PCIe and USB4 (wake coming from another
+ * router).
+ */
+ ret = tb_sw_read(sw, &ctrl, TB_CFG_SWITCH,
+ offset + TB_LC_SX_CTRL, 1);
if (ret)
- tb_lc_configure_lane(down, false);
+ return ret;
+
+ ctrl &= ~(TB_LC_SX_CTRL_WOC | TB_LC_SX_CTRL_WOD | TB_LC_SX_CTRL_WOP |
+ TB_LC_SX_CTRL_WOU4);
+
+ if (flags & TB_WAKE_ON_CONNECT)
+ ctrl |= TB_LC_SX_CTRL_WOC | TB_LC_SX_CTRL_WOD;
+ if (flags & TB_WAKE_ON_USB4)
+ ctrl |= TB_LC_SX_CTRL_WOU4;
+ if (flags & TB_WAKE_ON_PCIE)
+ ctrl |= TB_LC_SX_CTRL_WOP;
- return ret;
+ return tb_sw_write(sw, &ctrl, TB_CFG_SWITCH, offset + TB_LC_SX_CTRL, 1);
}
/**
- * tb_lc_unconfigure_link() - Let LC know about unconfigured link
- * @sw: Switch to unconfigure
+ * tb_lc_set_wake() - Enable/disable wake
+ * @sw: Switch whose wakes to configure
+ * @flags: Wakeup flags (%0 to disable)
*
- * Informs LC of both parent switch and @sw that the link between the
- * two does not exist anymore.
+ * For each LC sets wake bits accordingly.
*/
-void tb_lc_unconfigure_link(struct tb_switch *sw)
+int tb_lc_set_wake(struct tb_switch *sw, unsigned int flags)
{
- struct tb_port *up, *down;
+ int start, size, nlc, ret, i;
+ u32 desc;
- if (sw->is_unplugged || !tb_route(sw) || tb_switch_is_icm(sw))
- return;
+ if (sw->generation < 2)
+ return 0;
- up = tb_upstream_port(sw);
- down = tb_port_at(tb_route(sw), tb_to_switch(sw->dev.parent));
+ if (!tb_route(sw))
+ return 0;
- tb_lc_configure_lane(up, false);
- tb_lc_configure_lane(down, false);
+ ret = read_lc_desc(sw, &desc);
+ if (ret)
+ return ret;
+
+ /* Figure out number of link controllers */
+ nlc = desc & TB_LC_DESC_NLC_MASK;
+ start = (desc & TB_LC_DESC_SIZE_MASK) >> TB_LC_DESC_SIZE_SHIFT;
+ size = (desc & TB_LC_DESC_PORT_SIZE_MASK) >> TB_LC_DESC_PORT_SIZE_SHIFT;
+
+ /* For each link controller set sleep bit */
+ for (i = 0; i < nlc; i++) {
+ unsigned int offset = sw->cap_lc + start + i * size;
+
+ ret = tb_lc_set_wake_one(sw, offset, flags);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
/**
diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index 5f7489fa1327..3f79baa54829 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/property.h>
+#include <linux/platform_data/x86/apple.h>
#include "nhi.h"
#include "nhi_regs.h"
@@ -863,6 +864,22 @@ static int nhi_suspend_noirq(struct device *dev)
return __nhi_suspend_noirq(dev, device_may_wakeup(dev));
}
+static int nhi_freeze_noirq(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct tb *tb = pci_get_drvdata(pdev);
+
+ return tb_domain_freeze_noirq(tb);
+}
+
+static int nhi_thaw_noirq(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct tb *tb = pci_get_drvdata(pdev);
+
+ return tb_domain_thaw_noirq(tb);
+}
+
static bool nhi_wake_supported(struct pci_dev *pdev)
{
u8 val;
@@ -1069,6 +1086,69 @@ static bool nhi_imr_valid(struct pci_dev *pdev)
return true;
}
+/*
+ * During suspend the Thunderbolt controller is reset and all PCIe
+ * tunnels are lost. The NHI driver will try to reestablish all tunnels
+ * during resume. This adds device links between the tunneled PCIe
+ * downstream ports and the NHI so that the device core will make sure
+ * NHI is resumed first before the rest.
+ */
+static void tb_apple_add_links(struct tb_nhi *nhi)
+{
+ struct pci_dev *upstream, *pdev;
+
+ if (!x86_apple_machine)
+ return;
+
+ switch (nhi->pdev->device) {
+ case PCI_DEVICE_ID_INTEL_LIGHT_RIDGE:
+ case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C:
+ case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI:
+ case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI:
+ break;
+ default:
+ return;
+ }
+
+ upstream = pci_upstream_bridge(nhi->pdev);
+ while (upstream) {
+ if (!pci_is_pcie(upstream))
+ return;
+ if (pci_pcie_type(upstream) == PCI_EXP_TYPE_UPSTREAM)
+ break;
+ upstream = pci_upstream_bridge(upstream);
+ }
+
+ if (!upstream)
+ return;
+
+ /*
+ * For each hotplug downstream port, create add device link
+ * back to NHI so that PCIe tunnels can be re-established after
+ * sleep.
+ */
+ for_each_pci_bridge(pdev, upstream->subordinate) {
+ const struct device_link *link;
+
+ if (!pci_is_pcie(pdev))
+ continue;
+ if (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM ||
+ !pdev->is_hotplug_bridge)
+ continue;
+
+ link = device_link_add(&pdev->dev, &nhi->pdev->dev,
+ DL_FLAG_AUTOREMOVE_SUPPLIER |
+ DL_FLAG_PM_RUNTIME);
+ if (link) {
+ dev_dbg(&nhi->pdev->dev, "created link from %s\n",
+ dev_name(&pdev->dev));
+ } else {
+ dev_warn(&nhi->pdev->dev, "device link creation from %s failed\n",
+ dev_name(&pdev->dev));
+ }
+ }
+}
+
static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct tb_nhi *nhi;
@@ -1134,6 +1214,9 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return res;
}
+ tb_apple_add_links(nhi);
+ tb_acpi_add_links(nhi);
+
tb = icm_probe(nhi);
if (!tb)
tb = tb_probe(nhi);
@@ -1157,6 +1240,8 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
pci_set_drvdata(pdev, tb);
+ device_wakeup_enable(&pdev->dev);
+
pm_runtime_allow(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, TB_AUTOSUSPEND_DELAY);
pm_runtime_use_autosuspend(&pdev->dev);
@@ -1186,14 +1271,13 @@ static void nhi_remove(struct pci_dev *pdev)
static const struct dev_pm_ops nhi_pm_ops = {
.suspend_noirq = nhi_suspend_noirq,
.resume_noirq = nhi_resume_noirq,
- .freeze_noirq = nhi_suspend_noirq, /*
+ .freeze_noirq = nhi_freeze_noirq, /*
* we just disable hotplug, the
* pci-tunnels stay alive.
*/
- .thaw_noirq = nhi_resume_noirq,
+ .thaw_noirq = nhi_thaw_noirq,
.restore_noirq = nhi_resume_noirq,
.suspend = nhi_suspend,
- .freeze = nhi_suspend,
.poweroff_noirq = nhi_poweroff_noirq,
.poweroff = nhi_suspend,
.complete = nhi_complete,
diff --git a/drivers/thunderbolt/nhi_ops.c b/drivers/thunderbolt/nhi_ops.c
index 6795851aac95..96da07e88c52 100644
--- a/drivers/thunderbolt/nhi_ops.c
+++ b/drivers/thunderbolt/nhi_ops.c
@@ -59,7 +59,7 @@ static int icl_nhi_force_power(struct tb_nhi *nhi, bool power)
pci_write_config_dword(nhi->pdev, VS_CAP_22, vs_cap);
if (power) {
- unsigned int retries = 10;
+ unsigned int retries = 350;
u32 val;
/* Wait until the firmware tells it is up and running */
@@ -67,7 +67,7 @@ static int icl_nhi_force_power(struct tb_nhi *nhi, bool power)
pci_read_config_dword(nhi->pdev, VS_CAP_9, &val);
if (val & VS_CAP_9_FW_READY)
return 0;
- msleep(250);
+ usleep_range(3000, 3100);
} while (--retries);
return -ETIMEDOUT;
@@ -97,7 +97,7 @@ static int icl_nhi_lc_mailbox_cmd_complete(struct tb_nhi *nhi, int timeout)
pci_read_config_dword(nhi->pdev, VS_CAP_18, &data);
if (data & VS_CAP_18_DONE)
goto clear;
- msleep(100);
+ usleep_range(1000, 1100);
} while (time_before(jiffies, end));
return -ETIMEDOUT;
@@ -121,31 +121,38 @@ static void icl_nhi_set_ltr(struct tb_nhi *nhi)
static int icl_nhi_suspend(struct tb_nhi *nhi)
{
+ struct tb *tb = pci_get_drvdata(nhi->pdev);
int ret;
if (icl_nhi_is_device_connected(nhi))
return 0;
- /*
- * If there is no device connected we need to perform both: a
- * handshake through LC mailbox and force power down before
- * entering D3.
- */
- icl_nhi_lc_mailbox_cmd(nhi, ICL_LC_PREPARE_FOR_RESET);
- ret = icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT);
- if (ret)
- return ret;
+ if (tb_switch_is_icm(tb->root_switch)) {
+ /*
+ * If there is no device connected we need to perform
+ * both: a handshake through LC mailbox and force power
+ * down before entering D3.
+ */
+ icl_nhi_lc_mailbox_cmd(nhi, ICL_LC_PREPARE_FOR_RESET);
+ ret = icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT);
+ if (ret)
+ return ret;
+ }
return icl_nhi_force_power(nhi, false);
}
static int icl_nhi_suspend_noirq(struct tb_nhi *nhi, bool wakeup)
{
+ struct tb *tb = pci_get_drvdata(nhi->pdev);
enum icl_lc_mailbox_cmd cmd;
if (!pm_suspend_via_firmware())
return icl_nhi_suspend(nhi);
+ if (!tb_switch_is_icm(tb->root_switch))
+ return 0;
+
cmd = wakeup ? ICL_LC_GO2SX : ICL_LC_GO2SX_NO_WAKE;
icl_nhi_lc_mailbox_cmd(nhi, cmd);
return icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT);
diff --git a/drivers/thunderbolt/quirks.c b/drivers/thunderbolt/quirks.c
index 7eac3e0f90a2..57e2978a3c21 100644
--- a/drivers/thunderbolt/quirks.c
+++ b/drivers/thunderbolt/quirks.c
@@ -27,7 +27,7 @@ static const struct tb_quirk tb_quirks[] = {
* tb_check_quirks() - Check for quirks to apply
* @sw: Thunderbolt switch
*
- * Apply any quirks for the Thunderbolt controller
+ * Apply any quirks for the Thunderbolt controller.
*/
void tb_check_quirks(struct tb_switch *sw)
{
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index a921de9ce7cb..c73bbfe69ba1 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -601,6 +601,13 @@ int tb_port_add_nfc_credits(struct tb_port *port, int credits)
if (credits == 0 || port->sw->is_unplugged)
return 0;
+ /*
+ * USB4 restricts programming NFC buffers to lane adapters only
+ * so skip other ports.
+ */
+ if (tb_switch_is_usb4(port->sw) && !tb_port_is_null(port))
+ return 0;
+
nfc_credits = port->config.nfc_credits & ADP_CS_4_NFC_BUFFERS_MASK;
nfc_credits += credits;
@@ -666,6 +673,50 @@ int tb_port_unlock(struct tb_port *port)
return 0;
}
+static int __tb_port_enable(struct tb_port *port, bool enable)
+{
+ int ret;
+ u32 phy;
+
+ if (!tb_port_is_null(port))
+ return -EINVAL;
+
+ ret = tb_port_read(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+ if (ret)
+ return ret;
+
+ if (enable)
+ phy &= ~LANE_ADP_CS_1_LD;
+ else
+ phy |= LANE_ADP_CS_1_LD;
+
+ return tb_port_write(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+}
+
+/**
+ * tb_port_enable() - Enable lane adapter
+ * @port: Port to enable (can be %NULL)
+ *
+ * This is used for lane 0 and 1 adapters to enable it.
+ */
+int tb_port_enable(struct tb_port *port)
+{
+ return __tb_port_enable(port, true);
+}
+
+/**
+ * tb_port_disable() - Disable lane adapter
+ * @port: Port to disable (can be %NULL)
+ *
+ * This is used for lane 0 and 1 adapters to disable it.
+ */
+int tb_port_disable(struct tb_port *port)
+{
+ return __tb_port_enable(port, false);
+}
+
/**
* tb_init_port() - initialize a port
*
@@ -739,7 +790,7 @@ static int tb_port_alloc_hopid(struct tb_port *port, bool in, int min_hopid,
* NHI can use HopIDs 1-max for other adapters HopIDs 0-7 are
* reserved.
*/
- if (port->config.type != TB_TYPE_NHI && min_hopid < TB_PATH_MIN_HOPID)
+ if (!tb_port_is_nhi(port) && min_hopid < TB_PATH_MIN_HOPID)
min_hopid = TB_PATH_MIN_HOPID;
if (max_hopid < 0 || max_hopid > port_max_hopid)
@@ -1227,23 +1278,24 @@ static void tb_dump_switch(const struct tb *tb, const struct tb_switch *sw)
/**
* reset_switch() - reconfigure route, enable and send TB_CFG_PKG_RESET
+ * @sw: Switch to reset
*
* Return: Returns 0 on success or an error code on failure.
*/
-int tb_switch_reset(struct tb *tb, u64 route)
+int tb_switch_reset(struct tb_switch *sw)
{
struct tb_cfg_result res;
- struct tb_regs_switch_header header = {
- header.route_hi = route >> 32,
- header.route_lo = route,
- header.enabled = true,
- };
- tb_dbg(tb, "resetting switch at %llx\n", route);
- res.err = tb_cfg_write(tb->ctl, ((u32 *) &header) + 2, route,
- 0, 2, 2, 2);
+
+ if (sw->generation > 1)
+ return 0;
+
+ tb_sw_dbg(sw, "resetting switch\n");
+
+ res.err = tb_sw_write(sw, ((u32 *) &sw->config) + 2,
+ TB_CFG_SWITCH, 2, 2);
if (res.err)
return res.err;
- res = tb_cfg_reset(tb->ctl, route, TB_CFG_DEFAULT_TIMEOUT);
+ res = tb_cfg_reset(sw->tb->ctl, tb_route(sw), TB_CFG_DEFAULT_TIMEOUT);
if (res.err > 0)
return -EIO;
return res.err;
@@ -1261,7 +1313,7 @@ static int tb_plug_events_active(struct tb_switch *sw, bool active)
u32 data;
int res;
- if (tb_switch_is_icm(sw))
+ if (tb_switch_is_icm(sw) || tb_switch_is_usb4(sw))
return 0;
sw->config.plug_events_delay = 0xff;
@@ -1269,10 +1321,6 @@ static int tb_plug_events_active(struct tb_switch *sw, bool active)
if (res)
return res;
- /* Plug events are always enabled in USB4 */
- if (tb_switch_is_usb4(sw))
- return 0;
-
res = tb_sw_read(sw, &data, TB_CFG_SWITCH, sw->cap_plug_events + 1, 1);
if (res)
return res;
@@ -1649,7 +1697,7 @@ static struct attribute *switch_attrs[] = {
static umode_t switch_attr_is_visible(struct kobject *kobj,
struct attribute *attr, int n)
{
- struct device *dev = container_of(kobj, struct device, kobj);
+ struct device *dev = kobj_to_dev(kobj);
struct tb_switch *sw = tb_to_switch(dev);
if (attr == &dev_attr_device.attr) {
@@ -1988,7 +2036,7 @@ int tb_switch_configure(struct tb_switch *sw)
route = tb_route(sw);
tb_dbg(tb, "%s Switch at %#llx (depth: %d, up port: %d)\n",
- sw->config.enabled ? "restoring " : "initializing", route,
+ sw->config.enabled ? "restoring" : "initializing", route,
tb_route_length(route), sw->config.upstream_port_number);
sw->config.enabled = 1;
@@ -2008,10 +2056,6 @@ int tb_switch_configure(struct tb_switch *sw)
return ret;
ret = usb4_switch_setup(sw);
- if (ret)
- return ret;
-
- ret = usb4_switch_configure_link(sw);
} else {
if (sw->config.vendor_id != PCI_VENDOR_ID_INTEL)
tb_sw_warn(sw, "unknown switch vendor id %#x\n",
@@ -2025,10 +2069,6 @@ int tb_switch_configure(struct tb_switch *sw)
/* Enumerate the switch */
ret = tb_sw_write(sw, (u32 *)&sw->config + 1, TB_CFG_SWITCH,
ROUTER_CS_1, 3);
- if (ret)
- return ret;
-
- ret = tb_lc_configure_link(sw);
}
if (ret)
return ret;
@@ -2312,6 +2352,69 @@ void tb_switch_lane_bonding_disable(struct tb_switch *sw)
}
/**
+ * tb_switch_configure_link() - Set link configured
+ * @sw: Switch whose link is configured
+ *
+ * Sets the link upstream from @sw configured (from both ends) so that
+ * it will not be disconnected when the domain exits sleep. Can be
+ * called for any switch.
+ *
+ * It is recommended that this is called after lane bonding is enabled.
+ *
+ * Returns %0 on success and negative errno in case of error.
+ */
+int tb_switch_configure_link(struct tb_switch *sw)
+{
+ struct tb_port *up, *down;
+ int ret;
+
+ if (!tb_route(sw) || tb_switch_is_icm(sw))
+ return 0;
+
+ up = tb_upstream_port(sw);
+ if (tb_switch_is_usb4(up->sw))
+ ret = usb4_port_configure(up);
+ else
+ ret = tb_lc_configure_port(up);
+ if (ret)
+ return ret;
+
+ down = up->remote;
+ if (tb_switch_is_usb4(down->sw))
+ return usb4_port_configure(down);
+ return tb_lc_configure_port(down);
+}
+
+/**
+ * tb_switch_unconfigure_link() - Unconfigure link
+ * @sw: Switch whose link is unconfigured
+ *
+ * Sets the link unconfigured so the @sw will be disconnected if the
+ * domain exists sleep.
+ */
+void tb_switch_unconfigure_link(struct tb_switch *sw)
+{
+ struct tb_port *up, *down;
+
+ if (sw->is_unplugged)
+ return;
+ if (!tb_route(sw) || tb_switch_is_icm(sw))
+ return;
+
+ up = tb_upstream_port(sw);
+ if (tb_switch_is_usb4(up->sw))
+ usb4_port_unconfigure(up);
+ else
+ tb_lc_unconfigure_port(up);
+
+ down = up->remote;
+ if (tb_switch_is_usb4(down->sw))
+ usb4_port_unconfigure(down);
+ else
+ tb_lc_unconfigure_port(down);
+}
+
+/**
* tb_switch_add() - Add a switch to the domain
* @sw: Switch to add
*
@@ -2399,6 +2502,13 @@ int tb_switch_add(struct tb_switch *sw)
return ret;
}
+ /*
+ * Thunderbolt routers do not generate wakeups themselves but
+ * they forward wakeups from tunneled protocols, so enable it
+ * here.
+ */
+ device_init_wakeup(&sw->dev, true);
+
pm_runtime_set_active(&sw->dev);
if (sw->rpm) {
pm_runtime_set_autosuspend_delay(&sw->dev, TB_AUTOSUSPEND_DELAY);
@@ -2408,6 +2518,7 @@ int tb_switch_add(struct tb_switch *sw)
pm_request_autosuspend(&sw->dev);
}
+ tb_switch_debugfs_init(sw);
return 0;
}
@@ -2423,6 +2534,8 @@ void tb_switch_remove(struct tb_switch *sw)
{
struct tb_port *port;
+ tb_switch_debugfs_remove(sw);
+
if (sw->rpm) {
pm_runtime_get_sync(&sw->dev);
pm_runtime_disable(&sw->dev);
@@ -2445,11 +2558,6 @@ void tb_switch_remove(struct tb_switch *sw)
if (!sw->is_unplugged)
tb_plug_events_active(sw, false);
- if (tb_switch_is_usb4(sw))
- usb4_switch_unconfigure_link(sw);
- else
- tb_lc_unconfigure_link(sw);
-
tb_switch_nvm_remove(sw);
if (tb_route(sw))
@@ -2481,6 +2589,18 @@ void tb_sw_set_unplugged(struct tb_switch *sw)
}
}
+static int tb_switch_set_wake(struct tb_switch *sw, unsigned int flags)
+{
+ if (flags)
+ tb_sw_dbg(sw, "enabling wakeup: %#x\n", flags);
+ else
+ tb_sw_dbg(sw, "disabling wakeup\n");
+
+ if (tb_switch_is_usb4(sw))
+ return usb4_switch_set_wake(sw, flags);
+ return tb_lc_set_wake(sw, flags);
+}
+
int tb_switch_resume(struct tb_switch *sw)
{
struct tb_port *port;
@@ -2526,6 +2646,13 @@ int tb_switch_resume(struct tb_switch *sw)
if (err)
return err;
+ /* Disable wakes */
+ tb_switch_set_wake(sw, 0);
+
+ err = tb_switch_tmu_init(sw);
+ if (err)
+ return err;
+
/* check for surviving downstream switches */
tb_switch_for_each_port(sw, port) {
if (!tb_port_has_remote(port) && !port->xdomain)
@@ -2555,20 +2682,43 @@ int tb_switch_resume(struct tb_switch *sw)
return 0;
}
-void tb_switch_suspend(struct tb_switch *sw)
+/**
+ * tb_switch_suspend() - Put a switch to sleep
+ * @sw: Switch to suspend
+ * @runtime: Is this runtime suspend or system sleep
+ *
+ * Suspends router and all its children. Enables wakes according to
+ * value of @runtime and then sets sleep bit for the router. If @sw is
+ * host router the domain is ready to go to sleep once this function
+ * returns.
+ */
+void tb_switch_suspend(struct tb_switch *sw, bool runtime)
{
+ unsigned int flags = 0;
struct tb_port *port;
int err;
+ tb_sw_dbg(sw, "suspending switch\n");
+
err = tb_plug_events_active(sw, false);
if (err)
return;
tb_switch_for_each_port(sw, port) {
if (tb_port_has_remote(port))
- tb_switch_suspend(port->remote->sw);
+ tb_switch_suspend(port->remote->sw, runtime);
}
+ if (runtime) {
+ /* Trigger wake when something is plugged in/out */
+ flags |= TB_WAKE_ON_CONNECT | TB_WAKE_ON_DISCONNECT;
+ flags |= TB_WAKE_ON_USB4 | TB_WAKE_ON_USB3 | TB_WAKE_ON_PCIE;
+ } else if (device_may_wakeup(&sw->dev)) {
+ flags |= TB_WAKE_ON_USB4 | TB_WAKE_ON_USB3 | TB_WAKE_ON_PCIE;
+ }
+
+ tb_switch_set_wake(sw, flags);
+
if (tb_switch_is_usb4(sw))
usb4_switch_set_sleep(sw);
else
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index f507815040eb..214fbc92c1b7 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -9,6 +9,7 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/pm_runtime.h>
#include "tb.h"
#include "tb_regs.h"
@@ -22,13 +23,21 @@
* events and exit if this is not set (it needs to
* acquire the lock one more time). Used to drain wq
* after cfg has been paused.
+ * @remove_work: Work used to remove any unplugged routers after
+ * runtime resume
*/
struct tb_cm {
struct list_head tunnel_list;
struct list_head dp_resources;
bool hotplug_active;
+ struct delayed_work remove_work;
};
+static inline struct tb *tcm_to_tb(struct tb_cm *tcm)
+{
+ return ((void *)tcm - sizeof(struct tb));
+}
+
struct tb_hotplug_event {
struct work_struct work;
struct tb *tb;
@@ -140,6 +149,29 @@ static void tb_discover_tunnels(struct tb_switch *sw)
}
}
+static int tb_port_configure_xdomain(struct tb_port *port)
+{
+ /*
+ * XDomain paths currently only support single lane so we must
+ * disable the other lane according to USB4 spec.
+ */
+ tb_port_disable(port->dual_link_port);
+
+ if (tb_switch_is_usb4(port->sw))
+ return usb4_port_configure_xdomain(port);
+ return tb_lc_configure_xdomain(port);
+}
+
+static void tb_port_unconfigure_xdomain(struct tb_port *port)
+{
+ if (tb_switch_is_usb4(port->sw))
+ usb4_port_unconfigure_xdomain(port);
+ else
+ tb_lc_unconfigure_xdomain(port);
+
+ tb_port_enable(port->dual_link_port);
+}
+
static void tb_scan_xdomain(struct tb_port *port)
{
struct tb_switch *sw = port->sw;
@@ -158,6 +190,7 @@ static void tb_scan_xdomain(struct tb_port *port)
NULL);
if (xd) {
tb_port_at(route, sw)->xdomain = xd;
+ tb_port_configure_xdomain(port);
tb_xdomain_add(xd);
}
}
@@ -502,8 +535,13 @@ static void tb_scan_switch(struct tb_switch *sw)
{
struct tb_port *port;
+ pm_runtime_get_sync(&sw->dev);
+
tb_switch_for_each_port(sw, port)
tb_scan_port(port);
+
+ pm_runtime_mark_last_busy(&sw->dev);
+ pm_runtime_put_autosuspend(&sw->dev);
}
/**
@@ -566,6 +604,7 @@ static void tb_scan_port(struct tb_port *port)
*/
if (port->xdomain) {
tb_xdomain_remove(port->xdomain);
+ tb_port_unconfigure_xdomain(port);
port->xdomain = NULL;
}
@@ -577,6 +616,12 @@ static void tb_scan_port(struct tb_port *port)
if (!tcm->hotplug_active)
dev_set_uevent_suppress(&sw->dev, true);
+ /*
+ * At the moment Thunderbolt 2 and beyond (devices with LC) we
+ * can support runtime PM.
+ */
+ sw->rpm = sw->generation > 1;
+
if (tb_switch_add(sw)) {
tb_switch_put(sw);
return;
@@ -592,8 +637,9 @@ static void tb_scan_port(struct tb_port *port)
}
/* Enable lane bonding if supported */
- if (tb_switch_lane_bonding_enable(sw))
- tb_sw_warn(sw, "failed to enable lane bonding\n");
+ tb_switch_lane_bonding_enable(sw);
+ /* Set the link configured */
+ tb_switch_configure_link(sw);
if (tb_enable_tmu(sw))
tb_sw_warn(sw, "failed to enable TMU\n");
@@ -636,6 +682,11 @@ static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel)
* deallocated properly.
*/
tb_switch_dealloc_dp_resource(src_port->sw, src_port);
+ /* Now we can allow the domain to runtime suspend again */
+ pm_runtime_mark_last_busy(&dst_port->sw->dev);
+ pm_runtime_put_autosuspend(&dst_port->sw->dev);
+ pm_runtime_mark_last_busy(&src_port->sw->dev);
+ pm_runtime_put_autosuspend(&src_port->sw->dev);
fallthrough;
case TB_TUNNEL_USB3:
@@ -682,6 +733,7 @@ static void tb_free_unplugged_children(struct tb_switch *sw)
if (port->remote->sw->is_unplugged) {
tb_retimer_remove_all(port);
tb_remove_dp_resources(port->remote->sw);
+ tb_switch_unconfigure_link(port->remote->sw);
tb_switch_lane_bonding_disable(port->remote->sw);
tb_switch_remove(port->remote->sw);
port->remote = NULL;
@@ -821,9 +873,20 @@ static void tb_tunnel_dp(struct tb *tb)
return;
}
+ /*
+ * DP stream needs the domain to be active so runtime resume
+ * both ends of the tunnel.
+ *
+ * This should bring the routers in the middle active as well
+ * and keeps the domain from runtime suspending while the DP
+ * tunnel is active.
+ */
+ pm_runtime_get_sync(&in->sw->dev);
+ pm_runtime_get_sync(&out->sw->dev);
+
if (tb_switch_alloc_dp_resource(in->sw, in)) {
tb_port_dbg(in, "no resource available for DP IN, not tunneling\n");
- return;
+ goto err_rpm_put;
}
/* Make all unused USB3 bandwidth available for the new DP tunnel */
@@ -862,6 +925,11 @@ err_reclaim:
tb_reclaim_usb3_bandwidth(tb, in, out);
err_dealloc_dp:
tb_switch_dealloc_dp_resource(in->sw, in);
+err_rpm_put:
+ pm_runtime_mark_last_busy(&out->sw->dev);
+ pm_runtime_put_autosuspend(&out->sw->dev);
+ pm_runtime_mark_last_busy(&in->sw->dev);
+ pm_runtime_put_autosuspend(&in->sw->dev);
}
static void tb_dp_resource_unavailable(struct tb *tb, struct tb_port *port)
@@ -911,6 +979,29 @@ static void tb_dp_resource_available(struct tb *tb, struct tb_port *port)
tb_tunnel_dp(tb);
}
+static void tb_disconnect_and_release_dp(struct tb *tb)
+{
+ struct tb_cm *tcm = tb_priv(tb);
+ struct tb_tunnel *tunnel, *n;
+
+ /*
+ * Tear down all DP tunnels and release their resources. They
+ * will be re-established after resume based on plug events.
+ */
+ list_for_each_entry_safe_reverse(tunnel, n, &tcm->tunnel_list, list) {
+ if (tb_tunnel_is_dp(tunnel))
+ tb_deactivate_and_free_tunnel(tunnel);
+ }
+
+ while (!list_empty(&tcm->dp_resources)) {
+ struct tb_port *port;
+
+ port = list_first_entry(&tcm->dp_resources,
+ struct tb_port, list);
+ list_del_init(&port->list);
+ }
+}
+
static int tb_tunnel_pci(struct tb *tb, struct tb_switch *sw)
{
struct tb_port *up, *down, *port;
@@ -1022,6 +1113,10 @@ static void tb_handle_hotplug(struct work_struct *work)
struct tb_cm *tcm = tb_priv(tb);
struct tb_switch *sw;
struct tb_port *port;
+
+ /* Bring the domain back from sleep if it was suspended */
+ pm_runtime_get_sync(&tb->dev);
+
mutex_lock(&tb->lock);
if (!tcm->hotplug_active)
goto out; /* during init, suspend or shutdown */
@@ -1045,6 +1140,9 @@ static void tb_handle_hotplug(struct work_struct *work)
ev->route, ev->port, ev->unplug);
goto put_sw;
}
+
+ pm_runtime_get_sync(&sw->dev);
+
if (ev->unplug) {
tb_retimer_remove_all(port);
@@ -1054,6 +1152,7 @@ static void tb_handle_hotplug(struct work_struct *work)
tb_free_invalid_tunnels(tb);
tb_remove_dp_resources(port->remote->sw);
tb_switch_tmu_disable(port->remote->sw);
+ tb_switch_unconfigure_link(port->remote->sw);
tb_switch_lane_bonding_disable(port->remote->sw);
tb_switch_remove(port->remote->sw);
port->remote = NULL;
@@ -1077,6 +1176,7 @@ static void tb_handle_hotplug(struct work_struct *work)
port->xdomain = NULL;
__tb_disconnect_xdomain_paths(tb, xd);
tb_xdomain_put(xd);
+ tb_port_unconfigure_xdomain(port);
} else if (tb_port_is_dpout(port) || tb_port_is_dpin(port)) {
tb_dp_resource_unavailable(tb, port);
} else {
@@ -1096,10 +1196,17 @@ static void tb_handle_hotplug(struct work_struct *work)
}
}
+ pm_runtime_mark_last_busy(&sw->dev);
+ pm_runtime_put_autosuspend(&sw->dev);
+
put_sw:
tb_switch_put(sw);
out:
mutex_unlock(&tb->lock);
+
+ pm_runtime_mark_last_busy(&tb->dev);
+ pm_runtime_put_autosuspend(&tb->dev);
+
kfree(ev);
}
@@ -1135,6 +1242,7 @@ static void tb_stop(struct tb *tb)
struct tb_tunnel *tunnel;
struct tb_tunnel *n;
+ cancel_delayed_work(&tcm->remove_work);
/* tunnels are only present after everything has been initialized */
list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) {
/*
@@ -1186,6 +1294,8 @@ static int tb_start(struct tb *tb)
* root switch.
*/
tb->root_switch->no_nvm_upgrade = true;
+ /* All USB4 routers support runtime PM */
+ tb->root_switch->rpm = tb_switch_is_usb4(tb->root_switch);
ret = tb_switch_configure(tb->root_switch);
if (ret) {
@@ -1227,7 +1337,8 @@ static int tb_suspend_noirq(struct tb *tb)
struct tb_cm *tcm = tb_priv(tb);
tb_dbg(tb, "suspending...\n");
- tb_switch_suspend(tb->root_switch);
+ tb_disconnect_and_release_dp(tb);
+ tb_switch_suspend(tb->root_switch, false);
tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */
tb_dbg(tb, "suspend finished\n");
@@ -1238,17 +1349,25 @@ static void tb_restore_children(struct tb_switch *sw)
{
struct tb_port *port;
+ /* No need to restore if the router is already unplugged */
+ if (sw->is_unplugged)
+ return;
+
if (tb_enable_tmu(sw))
tb_sw_warn(sw, "failed to restore TMU configuration\n");
tb_switch_for_each_port(sw, port) {
- if (!tb_port_has_remote(port))
+ if (!tb_port_has_remote(port) && !port->xdomain)
continue;
- if (tb_switch_lane_bonding_enable(port->remote->sw))
- dev_warn(&sw->dev, "failed to restore lane bonding\n");
+ if (port->remote) {
+ tb_switch_lane_bonding_enable(port->remote->sw);
+ tb_switch_configure_link(port->remote->sw);
- tb_restore_children(port->remote->sw);
+ tb_restore_children(port->remote->sw);
+ } else if (port->xdomain) {
+ tb_port_configure_xdomain(port);
+ }
}
}
@@ -1260,7 +1379,7 @@ static int tb_resume_noirq(struct tb *tb)
tb_dbg(tb, "resuming...\n");
/* remove any pci devices the firmware might have setup */
- tb_switch_reset(tb, 0);
+ tb_switch_reset(tb->root_switch);
tb_switch_resume(tb->root_switch);
tb_free_invalid_tunnels(tb);
@@ -1294,6 +1413,7 @@ static int tb_free_unplugged_xdomains(struct tb_switch *sw)
if (port->xdomain && port->xdomain->is_unplugged) {
tb_retimer_remove_all(port);
tb_xdomain_remove(port->xdomain);
+ tb_port_unconfigure_xdomain(port);
port->xdomain = NULL;
ret++;
} else if (port->remote) {
@@ -1304,6 +1424,22 @@ static int tb_free_unplugged_xdomains(struct tb_switch *sw)
return ret;
}
+static int tb_freeze_noirq(struct tb *tb)
+{
+ struct tb_cm *tcm = tb_priv(tb);
+
+ tcm->hotplug_active = false;
+ return 0;
+}
+
+static int tb_thaw_noirq(struct tb *tb)
+{
+ struct tb_cm *tcm = tb_priv(tb);
+
+ tcm->hotplug_active = true;
+ return 0;
+}
+
static void tb_complete(struct tb *tb)
{
/*
@@ -1317,12 +1453,64 @@ static void tb_complete(struct tb *tb)
mutex_unlock(&tb->lock);
}
+static int tb_runtime_suspend(struct tb *tb)
+{
+ struct tb_cm *tcm = tb_priv(tb);
+
+ mutex_lock(&tb->lock);
+ tb_switch_suspend(tb->root_switch, true);
+ tcm->hotplug_active = false;
+ mutex_unlock(&tb->lock);
+
+ return 0;
+}
+
+static void tb_remove_work(struct work_struct *work)
+{
+ struct tb_cm *tcm = container_of(work, struct tb_cm, remove_work.work);
+ struct tb *tb = tcm_to_tb(tcm);
+
+ mutex_lock(&tb->lock);
+ if (tb->root_switch) {
+ tb_free_unplugged_children(tb->root_switch);
+ tb_free_unplugged_xdomains(tb->root_switch);
+ }
+ mutex_unlock(&tb->lock);
+}
+
+static int tb_runtime_resume(struct tb *tb)
+{
+ struct tb_cm *tcm = tb_priv(tb);
+ struct tb_tunnel *tunnel, *n;
+
+ mutex_lock(&tb->lock);
+ tb_switch_resume(tb->root_switch);
+ tb_free_invalid_tunnels(tb);
+ tb_restore_children(tb->root_switch);
+ list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list)
+ tb_tunnel_restart(tunnel);
+ tcm->hotplug_active = true;
+ mutex_unlock(&tb->lock);
+
+ /*
+ * Schedule cleanup of any unplugged devices. Run this in a
+ * separate thread to avoid possible deadlock if the device
+ * removal runtime resumes the unplugged device.
+ */
+ queue_delayed_work(tb->wq, &tcm->remove_work, msecs_to_jiffies(50));
+ return 0;
+}
+
static const struct tb_cm_ops tb_cm_ops = {
.start = tb_start,
.stop = tb_stop,
.suspend_noirq = tb_suspend_noirq,
.resume_noirq = tb_resume_noirq,
+ .freeze_noirq = tb_freeze_noirq,
+ .thaw_noirq = tb_thaw_noirq,
.complete = tb_complete,
+ .runtime_suspend = tb_runtime_suspend,
+ .runtime_resume = tb_runtime_resume,
.handle_event = tb_handle_event,
.approve_switch = tb_tunnel_pci,
.approve_xdomain_paths = tb_approve_xdomain_paths,
@@ -1344,6 +1532,7 @@ struct tb *tb_probe(struct tb_nhi *nhi)
tcm = tb_priv(tb);
INIT_LIST_HEAD(&tcm->tunnel_list);
INIT_LIST_HEAD(&tcm->dp_resources);
+ INIT_DELAYED_WORK(&tcm->remove_work, tb_remove_work);
return tb;
}
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index 3c620a9203c5..a9995e21b916 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -125,6 +125,7 @@ struct tb_switch_tmu {
* @rpm: The switch supports runtime PM
* @authorized: Whether the switch is authorized by user or policy
* @security_level: Switch supported security level
+ * @debugfs_dir: Pointer to the debugfs structure
* @key: Contains the key used to challenge the device or %NULL if not
* supported. Size of the key is %TB_SWITCH_KEY_SIZE.
* @connection_id: Connection ID used with ICM messaging
@@ -166,6 +167,7 @@ struct tb_switch {
bool rpm;
unsigned int authorized;
enum tb_security_level security_level;
+ struct dentry *debugfs_dir;
u8 *key;
u8 connection_id;
u8 connection_key;
@@ -333,6 +335,13 @@ struct tb_path {
*/
#define TB_PATH_MAX_HOPS (7 * 2)
+/* Possible wake types */
+#define TB_WAKE_ON_CONNECT BIT(0)
+#define TB_WAKE_ON_DISCONNECT BIT(1)
+#define TB_WAKE_ON_USB4 BIT(2)
+#define TB_WAKE_ON_USB3 BIT(3)
+#define TB_WAKE_ON_PCIE BIT(4)
+
/**
* struct tb_cm_ops - Connection manager specific operations vector
* @driver_ready: Called right after control channel is started. Used by
@@ -342,6 +351,8 @@ struct tb_path {
* @suspend_noirq: Connection manager specific suspend_noirq
* @resume_noirq: Connection manager specific resume_noirq
* @suspend: Connection manager specific suspend
+ * @freeze_noirq: Connection manager specific freeze_noirq
+ * @thaw_noirq: Connection manager specific thaw_noirq
* @complete: Connection manager specific complete
* @runtime_suspend: Connection manager specific runtime_suspend
* @runtime_resume: Connection manager specific runtime_resume
@@ -364,6 +375,8 @@ struct tb_cm_ops {
int (*suspend_noirq)(struct tb *tb);
int (*resume_noirq)(struct tb *tb);
int (*suspend)(struct tb *tb);
+ int (*freeze_noirq)(struct tb *tb);
+ int (*thaw_noirq)(struct tb *tb);
void (*complete)(struct tb *tb);
int (*runtime_suspend)(struct tb *tb);
int (*runtime_resume)(struct tb *tb);
@@ -457,6 +470,11 @@ static inline bool tb_port_is_null(const struct tb_port *port)
return port && port->port && port->config.type == TB_TYPE_PORT;
}
+static inline bool tb_port_is_nhi(const struct tb_port *port)
+{
+ return port && port->config.type == TB_TYPE_NHI;
+}
+
static inline bool tb_port_is_pcie_down(const struct tb_port *port)
{
return port && port->config.type == TB_TYPE_PCIE_DOWN;
@@ -593,6 +611,8 @@ void tb_domain_remove(struct tb *tb);
int tb_domain_suspend_noirq(struct tb *tb);
int tb_domain_resume_noirq(struct tb *tb);
int tb_domain_suspend(struct tb *tb);
+int tb_domain_freeze_noirq(struct tb *tb);
+int tb_domain_thaw_noirq(struct tb *tb);
void tb_domain_complete(struct tb *tb);
int tb_domain_runtime_suspend(struct tb *tb);
int tb_domain_runtime_resume(struct tb *tb);
@@ -632,9 +652,9 @@ struct tb_switch *tb_switch_alloc_safe_mode(struct tb *tb,
int tb_switch_configure(struct tb_switch *sw);
int tb_switch_add(struct tb_switch *sw);
void tb_switch_remove(struct tb_switch *sw);
-void tb_switch_suspend(struct tb_switch *sw);
+void tb_switch_suspend(struct tb_switch *sw, bool runtime);
int tb_switch_resume(struct tb_switch *sw);
-int tb_switch_reset(struct tb *tb, u64 route);
+int tb_switch_reset(struct tb_switch *sw);
void tb_sw_set_unplugged(struct tb_switch *sw);
struct tb_port *tb_switch_find_port(struct tb_switch *sw,
enum tb_port_type type);
@@ -685,59 +705,89 @@ static inline struct tb_switch *tb_switch_parent(struct tb_switch *sw)
static inline bool tb_switch_is_light_ridge(const struct tb_switch *sw)
{
- return sw->config.device_id == PCI_DEVICE_ID_INTEL_LIGHT_RIDGE;
+ return sw->config.vendor_id == PCI_VENDOR_ID_INTEL &&
+ sw->config.device_id == PCI_DEVICE_ID_INTEL_LIGHT_RIDGE;
}
static inline bool tb_switch_is_eagle_ridge(const struct tb_switch *sw)
{
- return sw->config.device_id == PCI_DEVICE_ID_INTEL_EAGLE_RIDGE;
+ return sw->config.vendor_id == PCI_VENDOR_ID_INTEL &&
+ sw->config.device_id == PCI_DEVICE_ID_INTEL_EAGLE_RIDGE;
}
static inline bool tb_switch_is_cactus_ridge(const struct tb_switch *sw)
{
- switch (sw->config.device_id) {
- case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_2C:
- case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C:
- return true;
- default:
- return false;
+ if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) {
+ switch (sw->config.device_id) {
+ case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_2C:
+ case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C:
+ return true;
+ }
}
+ return false;
}
static inline bool tb_switch_is_falcon_ridge(const struct tb_switch *sw)
{
- switch (sw->config.device_id) {
- case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE:
- case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE:
- return true;
- default:
- return false;
+ if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) {
+ switch (sw->config.device_id) {
+ case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE:
+ case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE:
+ return true;
+ }
}
+ return false;
}
static inline bool tb_switch_is_alpine_ridge(const struct tb_switch *sw)
{
- switch (sw->config.device_id) {
- case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_BRIDGE:
- case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_BRIDGE:
- case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_BRIDGE:
- case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_BRIDGE:
- return true;
- default:
- return false;
+ if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) {
+ switch (sw->config.device_id) {
+ case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_BRIDGE:
+ case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_BRIDGE:
+ case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_BRIDGE:
+ case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_BRIDGE:
+ return true;
+ }
}
+ return false;
}
static inline bool tb_switch_is_titan_ridge(const struct tb_switch *sw)
{
- switch (sw->config.device_id) {
- case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_BRIDGE:
- case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_BRIDGE:
- case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE:
- return true;
- default:
- return false;
+ if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) {
+ switch (sw->config.device_id) {
+ case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_BRIDGE:
+ case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_BRIDGE:
+ case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE:
+ return true;
+ }
+ }
+ return false;
+}
+
+static inline bool tb_switch_is_ice_lake(const struct tb_switch *sw)
+{
+ if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) {
+ switch (sw->config.device_id) {
+ case PCI_DEVICE_ID_INTEL_ICL_NHI0:
+ case PCI_DEVICE_ID_INTEL_ICL_NHI1:
+ return true;
+ }
+ }
+ return false;
+}
+
+static inline bool tb_switch_is_tiger_lake(const struct tb_switch *sw)
+{
+ if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) {
+ switch (sw->config.device_id) {
+ case PCI_DEVICE_ID_INTEL_TGL_NHI0:
+ case PCI_DEVICE_ID_INTEL_TGL_NHI1:
+ return true;
+ }
}
+ return false;
}
/**
@@ -767,6 +817,8 @@ static inline bool tb_switch_is_icm(const struct tb_switch *sw)
int tb_switch_lane_bonding_enable(struct tb_switch *sw);
void tb_switch_lane_bonding_disable(struct tb_switch *sw);
+int tb_switch_configure_link(struct tb_switch *sw);
+void tb_switch_unconfigure_link(struct tb_switch *sw);
bool tb_switch_query_dp_resource(struct tb_switch *sw, struct tb_port *in);
int tb_switch_alloc_dp_resource(struct tb_switch *sw, struct tb_port *in);
@@ -788,6 +840,8 @@ int tb_port_add_nfc_credits(struct tb_port *port, int credits);
int tb_port_set_initial_credits(struct tb_port *port, u32 credits);
int tb_port_clear_counter(struct tb_port *port, int counter);
int tb_port_unlock(struct tb_port *port);
+int tb_port_enable(struct tb_port *port);
+int tb_port_disable(struct tb_port *port);
int tb_port_alloc_in_hopid(struct tb_port *port, int hopid, int max_hopid);
void tb_port_release_in_hopid(struct tb_port *port, int hopid);
int tb_port_alloc_out_hopid(struct tb_port *port, int hopid, int max_hopid);
@@ -811,7 +865,9 @@ int tb_port_get_link_speed(struct tb_port *port);
int tb_switch_find_vse_cap(struct tb_switch *sw, enum tb_switch_vse_cap vsec);
int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap);
+int tb_switch_next_cap(struct tb_switch *sw, unsigned int offset);
int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap);
+int tb_port_next_cap(struct tb_port *port, unsigned int offset);
bool tb_port_is_enabled(struct tb_port *port);
bool tb_usb3_port_is_enabled(struct tb_port *port);
@@ -844,8 +900,11 @@ int tb_drom_read(struct tb_switch *sw);
int tb_drom_read_uid_only(struct tb_switch *sw, u64 *uid);
int tb_lc_read_uuid(struct tb_switch *sw, u32 *uuid);
-int tb_lc_configure_link(struct tb_switch *sw);
-void tb_lc_unconfigure_link(struct tb_switch *sw);
+int tb_lc_configure_port(struct tb_port *port);
+void tb_lc_unconfigure_port(struct tb_port *port);
+int tb_lc_configure_xdomain(struct tb_port *port);
+void tb_lc_unconfigure_xdomain(struct tb_port *port);
+int tb_lc_set_wake(struct tb_switch *sw, unsigned int flags);
int tb_lc_set_sleep(struct tb_switch *sw);
bool tb_lc_lane_bonding_possible(struct tb_switch *sw);
bool tb_lc_dp_sink_query(struct tb_switch *sw, struct tb_port *in);
@@ -900,9 +959,8 @@ int usb4_switch_setup(struct tb_switch *sw);
int usb4_switch_read_uid(struct tb_switch *sw, u64 *uid);
int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf,
size_t size);
-int usb4_switch_configure_link(struct tb_switch *sw);
-void usb4_switch_unconfigure_link(struct tb_switch *sw);
bool usb4_switch_lane_bonding_possible(struct tb_switch *sw);
+int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags);
int usb4_switch_set_sleep(struct tb_switch *sw);
int usb4_switch_nvm_sector_size(struct tb_switch *sw);
int usb4_switch_nvm_read(struct tb_switch *sw, unsigned int address, void *buf,
@@ -919,6 +977,10 @@ struct tb_port *usb4_switch_map_usb3_down(struct tb_switch *sw,
const struct tb_port *port);
int usb4_port_unlock(struct tb_port *port);
+int usb4_port_configure(struct tb_port *port);
+void usb4_port_unconfigure(struct tb_port *port);
+int usb4_port_configure_xdomain(struct tb_port *port);
+void usb4_port_unconfigure_xdomain(struct tb_port *port);
int usb4_port_enumerate_retimers(struct tb_port *port);
int usb4_port_retimer_read(struct tb_port *port, u8 index, u8 reg, void *buf,
@@ -945,9 +1007,35 @@ int usb4_usb3_port_allocate_bandwidth(struct tb_port *port, int *upstream_bw,
int usb4_usb3_port_release_bandwidth(struct tb_port *port, int *upstream_bw,
int *downstream_bw);
-/* keep link controller awake during update */
+/* Keep link controller awake during update */
#define QUIRK_FORCE_POWER_LINK_CONTROLLER BIT(0)
void tb_check_quirks(struct tb_switch *sw);
+#ifdef CONFIG_ACPI
+void tb_acpi_add_links(struct tb_nhi *nhi);
+#else
+static inline void tb_acpi_add_links(struct tb_nhi *nhi) { }
+#endif
+
+#ifdef CONFIG_DEBUG_FS
+void tb_debugfs_init(void);
+void tb_debugfs_exit(void);
+void tb_switch_debugfs_init(struct tb_switch *sw);
+void tb_switch_debugfs_remove(struct tb_switch *sw);
+#else
+static inline void tb_debugfs_init(void) { }
+static inline void tb_debugfs_exit(void) { }
+static inline void tb_switch_debugfs_init(struct tb_switch *sw) { }
+static inline void tb_switch_debugfs_remove(struct tb_switch *sw) { }
+#endif
+
+#ifdef CONFIG_USB4_KUNIT_TEST
+int tb_test_init(void);
+void tb_test_exit(void);
+#else
+static inline int tb_test_init(void) { return 0; }
+static inline void tb_test_exit(void) { }
+#endif
+
#endif
diff --git a/drivers/thunderbolt/tb_msgs.h b/drivers/thunderbolt/tb_msgs.h
index fc208c567953..0e01dbc63e72 100644
--- a/drivers/thunderbolt/tb_msgs.h
+++ b/drivers/thunderbolt/tb_msgs.h
@@ -28,6 +28,7 @@ enum tb_cfg_error {
TB_CFG_ERROR_LOOP = 8,
TB_CFG_ERROR_HEC_ERROR_DETECTED = 12,
TB_CFG_ERROR_FLOW_CONTROL_ERROR = 13,
+ TB_CFG_ERROR_LOCK = 15,
};
/* common header */
diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
index fd4fc144d17f..e7d9529822fa 100644
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -39,6 +39,7 @@ enum tb_switch_vse_cap {
enum tb_port_cap {
TB_PORT_CAP_PHY = 0x01,
+ TB_PORT_CAP_POWER = 0x02,
TB_PORT_CAP_TIME1 = 0x03,
TB_PORT_CAP_ADAP = 0x04,
TB_PORT_CAP_VSE = 0x05,
@@ -93,6 +94,20 @@ struct tb_cap_extended_long {
u16 length;
} __packed;
+/**
+ * struct tb_cap_any - Structure capable of hold every capability
+ * @basic: Basic capability
+ * @extended_short: Vendor specific capability
+ * @extended_long: Vendor specific extended capability
+ */
+struct tb_cap_any {
+ union {
+ struct tb_cap_basic basic;
+ struct tb_cap_extended_short extended_short;
+ struct tb_cap_extended_long extended_long;
+ };
+} __packed;
+
/* capabilities */
struct tb_cap_link_controller {
@@ -178,6 +193,8 @@ struct tb_regs_switch_header {
#define ROUTER_CS_4 0x04
#define ROUTER_CS_5 0x05
#define ROUTER_CS_5_SLP BIT(0)
+#define ROUTER_CS_5_WOP BIT(1)
+#define ROUTER_CS_5_WOU BIT(2)
#define ROUTER_CS_5_C3S BIT(23)
#define ROUTER_CS_5_PTO BIT(24)
#define ROUTER_CS_5_UTO BIT(25)
@@ -186,6 +203,8 @@ struct tb_regs_switch_header {
#define ROUTER_CS_6 0x06
#define ROUTER_CS_6_SLPR BIT(0)
#define ROUTER_CS_6_TNS BIT(1)
+#define ROUTER_CS_6_WOPS BIT(2)
+#define ROUTER_CS_6_WOUS BIT(3)
#define ROUTER_CS_6_HCI BIT(18)
#define ROUTER_CS_6_CR BIT(25)
#define ROUTER_CS_7 0x07
@@ -234,7 +253,8 @@ struct tb_regs_port_header {
/* DWORD 1 */
u32 first_cap_offset:8;
u32 max_counters:11;
- u32 __unknown1:5;
+ u32 counters_support:1;
+ u32 __unknown1:4;
u32 revision:8;
/* DWORD 2 */
enum tb_port_type type:24;
@@ -279,6 +299,7 @@ struct tb_regs_port_header {
#define LANE_ADP_CS_1_TARGET_WIDTH_SHIFT 4
#define LANE_ADP_CS_1_TARGET_WIDTH_SINGLE 0x1
#define LANE_ADP_CS_1_TARGET_WIDTH_DUAL 0x3
+#define LANE_ADP_CS_1_LD BIT(14)
#define LANE_ADP_CS_1_LB BIT(15)
#define LANE_ADP_CS_1_CURRENT_SPEED_MASK GENMASK(19, 16)
#define LANE_ADP_CS_1_CURRENT_SPEED_SHIFT 16
@@ -301,8 +322,13 @@ struct tb_regs_port_header {
#define PORT_CS_18 0x12
#define PORT_CS_18_BE BIT(8)
#define PORT_CS_18_TCM BIT(9)
+#define PORT_CS_18_WOU4S BIT(18)
#define PORT_CS_19 0x13
#define PORT_CS_19_PC BIT(3)
+#define PORT_CS_19_PID BIT(4)
+#define PORT_CS_19_WOC BIT(16)
+#define PORT_CS_19_WOD BIT(17)
+#define PORT_CS_19_WOU4 BIT(18)
/* Display Port adapter registers */
#define ADP_DP_CS_0 0x00
@@ -416,8 +442,14 @@ struct tb_regs_hop {
#define TB_LC_PORT_ATTR_BE BIT(12)
#define TB_LC_SX_CTRL 0x96
+#define TB_LC_SX_CTRL_WOC BIT(1)
+#define TB_LC_SX_CTRL_WOD BIT(2)
+#define TB_LC_SX_CTRL_WOU4 BIT(5)
+#define TB_LC_SX_CTRL_WOP BIT(6)
#define TB_LC_SX_CTRL_L1C BIT(16)
+#define TB_LC_SX_CTRL_L1D BIT(17)
#define TB_LC_SX_CTRL_L2C BIT(20)
+#define TB_LC_SX_CTRL_L2D BIT(21)
#define TB_LC_SX_CTRL_UPSTREAM BIT(30)
#define TB_LC_SX_CTRL_SLP BIT(31)
diff --git a/drivers/thunderbolt/test.c b/drivers/thunderbolt/test.c
index a4d78811f7e2..464c2d37b992 100644
--- a/drivers/thunderbolt/test.c
+++ b/drivers/thunderbolt/test.c
@@ -1623,4 +1623,15 @@ static struct kunit_suite tb_test_suite = {
.name = "thunderbolt",
.test_cases = tb_test_cases,
};
-kunit_test_suite(tb_test_suite);
+
+static struct kunit_suite *tb_test_suites[] = { &tb_test_suite, NULL };
+
+int tb_test_init(void)
+{
+ return __kunit_test_suites_init(tb_test_suites);
+}
+
+void tb_test_exit(void)
+{
+ return __kunit_test_suites_exit(tb_test_suites);
+}
diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index 2b8355e6b65f..40f13579a3fe 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -196,6 +196,46 @@ static int usb4_switch_op(struct tb_switch *sw, u16 opcode, u8 *status)
return 0;
}
+static void usb4_switch_check_wakes(struct tb_switch *sw)
+{
+ struct tb_port *port;
+ bool wakeup = false;
+ u32 val;
+
+ if (!device_may_wakeup(&sw->dev))
+ return;
+
+ if (tb_route(sw)) {
+ if (tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_6, 1))
+ return;
+
+ tb_sw_dbg(sw, "PCIe wake: %s, USB3 wake: %s\n",
+ (val & ROUTER_CS_6_WOPS) ? "yes" : "no",
+ (val & ROUTER_CS_6_WOUS) ? "yes" : "no");
+
+ wakeup = val & (ROUTER_CS_6_WOPS | ROUTER_CS_6_WOUS);
+ }
+
+ /* Check for any connected downstream ports for USB4 wake */
+ tb_switch_for_each_port(sw, port) {
+ if (!tb_port_has_remote(port))
+ continue;
+
+ if (tb_port_read(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_18, 1))
+ break;
+
+ tb_port_dbg(port, "USB4 wake: %s\n",
+ (val & PORT_CS_18_WOU4S) ? "yes" : "no");
+
+ if (val & PORT_CS_18_WOU4S)
+ wakeup = true;
+ }
+
+ if (wakeup)
+ pm_wakeup_event(&sw->dev, 0);
+}
+
static bool link_is_usb4(struct tb_port *port)
{
u32 val;
@@ -229,6 +269,8 @@ int usb4_switch_setup(struct tb_switch *sw)
u32 val = 0;
int ret;
+ usb4_switch_check_wakes(sw);
+
if (!tb_route(sw))
return 0;
@@ -338,87 +380,99 @@ int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf,
usb4_switch_drom_read_block, sw);
}
-static int usb4_set_port_configured(struct tb_port *port, bool configured)
+/**
+ * usb4_switch_lane_bonding_possible() - Are conditions met for lane bonding
+ * @sw: USB4 router
+ *
+ * Checks whether conditions are met so that lane bonding can be
+ * established with the upstream router. Call only for device routers.
+ */
+bool usb4_switch_lane_bonding_possible(struct tb_switch *sw)
{
+ struct tb_port *up;
int ret;
u32 val;
- ret = tb_port_read(port, &val, TB_CFG_PORT,
- port->cap_usb4 + PORT_CS_19, 1);
+ up = tb_upstream_port(sw);
+ ret = tb_port_read(up, &val, TB_CFG_PORT, up->cap_usb4 + PORT_CS_18, 1);
if (ret)
- return ret;
-
- if (configured)
- val |= PORT_CS_19_PC;
- else
- val &= ~PORT_CS_19_PC;
+ return false;
- return tb_port_write(port, &val, TB_CFG_PORT,
- port->cap_usb4 + PORT_CS_19, 1);
+ return !!(val & PORT_CS_18_BE);
}
/**
- * usb4_switch_configure_link() - Set upstream USB4 link configured
+ * usb4_switch_set_wake() - Enabled/disable wake
* @sw: USB4 router
+ * @flags: Wakeup flags (%0 to disable)
*
- * Sets the upstream USB4 link to be configured for power management
- * purposes.
+ * Enables/disables router to wake up from sleep.
*/
-int usb4_switch_configure_link(struct tb_switch *sw)
+int usb4_switch_set_wake(struct tb_switch *sw, unsigned int flags)
{
- struct tb_port *up;
+ struct tb_port *port;
+ u64 route = tb_route(sw);
+ u32 val;
+ int ret;
- if (!tb_route(sw))
- return 0;
+ /*
+ * Enable wakes coming from all USB4 downstream ports (from
+ * child routers). For device routers do this also for the
+ * upstream USB4 port.
+ */
+ tb_switch_for_each_port(sw, port) {
+ if (!route && tb_is_upstream_port(port))
+ continue;
- up = tb_upstream_port(sw);
- return usb4_set_port_configured(up, true);
-}
+ ret = tb_port_read(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_19, 1);
+ if (ret)
+ return ret;
-/**
- * usb4_switch_unconfigure_link() - Un-set upstream USB4 link configuration
- * @sw: USB4 router
- *
- * Reverse of usb4_switch_configure_link().
- */
-void usb4_switch_unconfigure_link(struct tb_switch *sw)
-{
- struct tb_port *up;
+ val &= ~(PORT_CS_19_WOC | PORT_CS_19_WOD | PORT_CS_19_WOU4);
- if (sw->is_unplugged || !tb_route(sw))
- return;
+ if (flags & TB_WAKE_ON_CONNECT)
+ val |= PORT_CS_19_WOC;
+ if (flags & TB_WAKE_ON_DISCONNECT)
+ val |= PORT_CS_19_WOD;
+ if (flags & TB_WAKE_ON_USB4)
+ val |= PORT_CS_19_WOU4;
- up = tb_upstream_port(sw);
- usb4_set_port_configured(up, false);
-}
+ ret = tb_port_write(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_19, 1);
+ if (ret)
+ return ret;
+ }
-/**
- * usb4_switch_lane_bonding_possible() - Are conditions met for lane bonding
- * @sw: USB4 router
- *
- * Checks whether conditions are met so that lane bonding can be
- * established with the upstream router. Call only for device routers.
- */
-bool usb4_switch_lane_bonding_possible(struct tb_switch *sw)
-{
- struct tb_port *up;
- int ret;
- u32 val;
+ /*
+ * Enable wakes from PCIe and USB 3.x on this router. Only
+ * needed for device routers.
+ */
+ if (route) {
+ ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1);
+ if (ret)
+ return ret;
- up = tb_upstream_port(sw);
- ret = tb_port_read(up, &val, TB_CFG_PORT, up->cap_usb4 + PORT_CS_18, 1);
- if (ret)
- return false;
+ val &= ~(ROUTER_CS_5_WOP | ROUTER_CS_5_WOU);
+ if (flags & TB_WAKE_ON_USB3)
+ val |= ROUTER_CS_5_WOU;
+ if (flags & TB_WAKE_ON_PCIE)
+ val |= ROUTER_CS_5_WOP;
- return !!(val & PORT_CS_18_BE);
+ ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, ROUTER_CS_5, 1);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
/**
* usb4_switch_set_sleep() - Prepare the router to enter sleep
* @sw: USB4 router
*
- * Enables wakes and sets sleep bit for the router. Returns when the
- * router sleep ready bit has been asserted.
+ * Sets sleep bit for the router. Returns when the router sleep ready
+ * bit has been asserted.
*/
int usb4_switch_set_sleep(struct tb_switch *sw)
{
@@ -795,6 +849,95 @@ int usb4_port_unlock(struct tb_port *port)
return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_4, 1);
}
+static int usb4_port_set_configured(struct tb_port *port, bool configured)
+{
+ int ret;
+ u32 val;
+
+ if (!port->cap_usb4)
+ return -EINVAL;
+
+ ret = tb_port_read(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_19, 1);
+ if (ret)
+ return ret;
+
+ if (configured)
+ val |= PORT_CS_19_PC;
+ else
+ val &= ~PORT_CS_19_PC;
+
+ return tb_port_write(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_19, 1);
+}
+
+/**
+ * usb4_port_configure() - Set USB4 port configured
+ * @port: USB4 router
+ *
+ * Sets the USB4 link to be configured for power management purposes.
+ */
+int usb4_port_configure(struct tb_port *port)
+{
+ return usb4_port_set_configured(port, true);
+}
+
+/**
+ * usb4_port_unconfigure() - Set USB4 port unconfigured
+ * @port: USB4 router
+ *
+ * Sets the USB4 link to be unconfigured for power management purposes.
+ */
+void usb4_port_unconfigure(struct tb_port *port)
+{
+ usb4_port_set_configured(port, false);
+}
+
+static int usb4_set_xdomain_configured(struct tb_port *port, bool configured)
+{
+ int ret;
+ u32 val;
+
+ if (!port->cap_usb4)
+ return -EINVAL;
+
+ ret = tb_port_read(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_19, 1);
+ if (ret)
+ return ret;
+
+ if (configured)
+ val |= PORT_CS_19_PID;
+ else
+ val &= ~PORT_CS_19_PID;
+
+ return tb_port_write(port, &val, TB_CFG_PORT,
+ port->cap_usb4 + PORT_CS_19, 1);
+}
+
+/**
+ * usb4_port_configure_xdomain() - Configure port for XDomain
+ * @port: USB4 port connected to another host
+ *
+ * Marks the USB4 port as being connected to another host. Returns %0 in
+ * success and negative errno in failure.
+ */
+int usb4_port_configure_xdomain(struct tb_port *port)
+{
+ return usb4_set_xdomain_configured(port, true);
+}
+
+/**
+ * usb4_port_unconfigure_xdomain() - Unconfigure port for XDomain
+ * @port: USB4 port that was connected to another host
+ *
+ * Clears USB4 port from being marked as XDomain.
+ */
+void usb4_port_unconfigure_xdomain(struct tb_port *port)
+{
+ usb4_set_xdomain_configured(port, false);
+}
+
static int usb4_port_wait_for_bit(struct tb_port *port, u32 offset, u32 bit,
u32 value, int timeout_msec)
{
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index ea66f8f385ba..e62a770a5d3b 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -230,12 +230,12 @@ CXACRU__ATTR_INIT(_name)
static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%u\n", value);
+ return sprintf(buf, "%u\n", value);
}
static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%d\n", value);
+ return sprintf(buf, "%d\n", value);
}
static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf)
@@ -255,8 +255,8 @@ static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf)
static char *str[] = { "no", "yes" };
if (unlikely(value >= ARRAY_SIZE(str)))
- return snprintf(buf, PAGE_SIZE, "%u\n", value);
- return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
+ return sprintf(buf, "%u\n", value);
+ return sprintf(buf, "%s\n", str[value]);
}
static ssize_t cxacru_sysfs_showattr_LINK(u32 value, char *buf)
@@ -264,8 +264,8 @@ static ssize_t cxacru_sysfs_showattr_LINK(u32 value, char *buf)
static char *str[] = { NULL, "not connected", "connected", "lost" };
if (unlikely(value >= ARRAY_SIZE(str) || str[value] == NULL))
- return snprintf(buf, PAGE_SIZE, "%u\n", value);
- return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
+ return sprintf(buf, "%u\n", value);
+ return sprintf(buf, "%s\n", str[value]);
}
static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf)
@@ -275,8 +275,8 @@ static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf)
"waiting", "initialising"
};
if (unlikely(value >= ARRAY_SIZE(str)))
- return snprintf(buf, PAGE_SIZE, "%u\n", value);
- return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
+ return sprintf(buf, "%u\n", value);
+ return sprintf(buf, "%s\n", str[value]);
}
static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf)
@@ -288,8 +288,8 @@ static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf)
"ITU-T G.992.2 (G.LITE)"
};
if (unlikely(value >= ARRAY_SIZE(str)))
- return snprintf(buf, PAGE_SIZE, "%u\n", value);
- return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
+ return sprintf(buf, "%u\n", value);
+ return sprintf(buf, "%s\n", str[value]);
}
/*
@@ -309,8 +309,7 @@ static ssize_t mac_address_show(struct device *dev,
if (instance == NULL || instance->usbatm->atm_dev == NULL)
return -ENODEV;
- return snprintf(buf, PAGE_SIZE, "%pM\n",
- instance->usbatm->atm_dev->esi);
+ return sprintf(buf, "%pM\n", instance->usbatm->atm_dev->esi);
}
static ssize_t adsl_state_show(struct device *dev,
@@ -326,8 +325,8 @@ static ssize_t adsl_state_show(struct device *dev,
value = instance->card_info[CXINF_LINE_STARTABLE];
if (unlikely(value >= ARRAY_SIZE(str)))
- return snprintf(buf, PAGE_SIZE, "%u\n", value);
- return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
+ return sprintf(buf, "%u\n", value);
+ return sprintf(buf, "%s\n", str[value]);
}
static ssize_t adsl_state_store(struct device *dev,
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 4e12a32ca392..56fe30d247da 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -511,9 +511,10 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance,
** receive **
**************/
-static void usbatm_rx_process(unsigned long data)
+static void usbatm_rx_process(struct tasklet_struct *t)
{
- struct usbatm_data *instance = (struct usbatm_data *)data;
+ struct usbatm_data *instance = from_tasklet(instance, t,
+ rx_channel.tasklet);
struct urb *urb;
while ((urb = usbatm_pop_urb(&instance->rx_channel))) {
@@ -564,9 +565,10 @@ static void usbatm_rx_process(unsigned long data)
** send **
***********/
-static void usbatm_tx_process(unsigned long data)
+static void usbatm_tx_process(struct tasklet_struct *t)
{
- struct usbatm_data *instance = (struct usbatm_data *)data;
+ struct usbatm_data *instance = from_tasklet(instance, t,
+ tx_channel.tasklet);
struct sk_buff *skb = instance->current_skb;
struct urb *urb = NULL;
const unsigned int buf_size = instance->tx_channel.buf_size;
@@ -1069,8 +1071,8 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id,
usbatm_init_channel(&instance->rx_channel);
usbatm_init_channel(&instance->tx_channel);
- tasklet_init(&instance->rx_channel.tasklet, usbatm_rx_process, (unsigned long)instance);
- tasklet_init(&instance->tx_channel.tasklet, usbatm_tx_process, (unsigned long)instance);
+ tasklet_setup(&instance->rx_channel.tasklet, usbatm_rx_process);
+ tasklet_setup(&instance->tx_channel.tasklet, usbatm_tx_process);
instance->rx_channel.stride = ATM_CELL_SIZE + driver->rx_padding;
instance->tx_channel.stride = ATM_CELL_SIZE + driver->tx_padding;
instance->rx_channel.usbatm = instance->tx_channel.usbatm = instance;
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
index 60f4711717d2..e65f1a0ae80b 100644
--- a/drivers/usb/c67x00/c67x00-sched.c
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -1123,9 +1123,9 @@ static void c67x00_do_work(struct c67x00_hcd *c67x00)
/* -------------------------------------------------------------------------- */
-static void c67x00_sched_tasklet(unsigned long __c67x00)
+static void c67x00_sched_tasklet(struct tasklet_struct *t)
{
- struct c67x00_hcd *c67x00 = (struct c67x00_hcd *)__c67x00;
+ struct c67x00_hcd *c67x00 = from_tasklet(c67x00, t, tasklet);
c67x00_do_work(c67x00);
}
@@ -1136,8 +1136,7 @@ void c67x00_sched_kick(struct c67x00_hcd *c67x00)
int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00)
{
- tasklet_init(&c67x00->tasklet, c67x00_sched_tasklet,
- (unsigned long)c67x00);
+ tasklet_setup(&c67x00->tasklet, c67x00_sched_tasklet);
return 0;
}
diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c
index aba988e71958..54a2d70a9c73 100644
--- a/drivers/usb/cdns3/cdns3-imx.c
+++ b/drivers/usb/cdns3/cdns3-imx.c
@@ -15,6 +15,8 @@
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/iopoll.h>
+#include <linux/pm_runtime.h>
+#include "core.h"
#define USB3_CORE_CTRL1 0x00
#define USB3_CORE_CTRL2 0x04
@@ -32,7 +34,7 @@
/* Register bits definition */
/* USB3_CORE_CTRL1 */
-#define SW_RESET_MASK (0x3f << 26)
+#define SW_RESET_MASK GENMASK(31, 26)
#define PWR_SW_RESET BIT(31)
#define APB_SW_RESET BIT(30)
#define AXI_SW_RESET BIT(29)
@@ -53,8 +55,8 @@
#define LPM_CLK_REQ BIT(28)
#define DEVU3_WAEKUP_EN BIT(14)
#define OTG_WAKEUP_EN BIT(12)
-#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
-#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
+#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
+#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
/* USB3_CORE_STATUS */
#define MDCTRL_CLK_STATUS BIT(15)
@@ -66,11 +68,30 @@
#define CLK_VALID_COMPARE_BITS (0xf << 28)
#define PHY_REFCLK_REQ (1 << 0)
+/* OTG registers definition */
+#define OTGSTS 0x4
+/* OTGSTS */
+#define OTG_NRDY BIT(11)
+
+/* xHCI registers definition */
+#define XECP_PM_PMCSR 0x8018
+#define XECP_AUX_CTRL_REG1 0x8120
+
+/* Register bits definition */
+/* XECP_AUX_CTRL_REG1 */
+#define CFG_RXDET_P3_EN BIT(15)
+
+/* XECP_PM_PMCSR */
+#define PS_MASK GENMASK(1, 0)
+#define PS_D0 0
+#define PS_D1 1
+
struct cdns_imx {
struct device *dev;
void __iomem *noncore;
struct clk_bulk_data *clks;
int num_clks;
+ struct platform_device *cdns3_pdev;
};
static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
@@ -126,6 +147,20 @@ static int cdns_imx_noncore_init(struct cdns_imx *data)
return ret;
}
+static int cdns_imx_platform_suspend(struct device *dev,
+ bool suspend, bool wakeup);
+static struct cdns3_platform_data cdns_imx_pdata = {
+ .platform_suspend = cdns_imx_platform_suspend,
+};
+
+static const struct of_dev_auxdata cdns_imx_auxdata[] = {
+ {
+ .compatible = "cdns,usb3",
+ .platform_data = &cdns_imx_pdata,
+ },
+ {},
+};
+
static int cdns_imx_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -162,14 +197,18 @@ static int cdns_imx_probe(struct platform_device *pdev)
if (ret)
goto err;
- ret = of_platform_populate(node, NULL, NULL, dev);
+ ret = of_platform_populate(node, NULL, cdns_imx_auxdata, dev);
if (ret) {
dev_err(dev, "failed to create children: %d\n", ret);
goto err;
}
- return ret;
+ device_set_wakeup_capable(dev, true);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_runtime_forbid(dev);
+ return ret;
err:
clk_bulk_disable_unprepare(data->num_clks, data->clks);
return ret;
@@ -194,6 +233,147 @@ static int cdns_imx_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+static void cdns3_set_wakeup(struct cdns_imx *data, bool enable)
+{
+ u32 value;
+
+ value = cdns_imx_readl(data, USB3_INT_REG);
+ if (enable)
+ value |= OTG_WAKEUP_EN | DEVU3_WAEKUP_EN;
+ else
+ value &= ~(OTG_WAKEUP_EN | DEVU3_WAEKUP_EN);
+
+ cdns_imx_writel(data, USB3_INT_REG, value);
+}
+
+static int cdns_imx_platform_suspend(struct device *dev,
+ bool suspend, bool wakeup)
+{
+ struct cdns3 *cdns = dev_get_drvdata(dev);
+ struct device *parent = dev->parent;
+ struct cdns_imx *data = dev_get_drvdata(parent);
+ void __iomem *otg_regs = (void __iomem *)(cdns->otg_regs);
+ void __iomem *xhci_regs = cdns->xhci_regs;
+ u32 value;
+ int ret = 0;
+
+ if (cdns->role != USB_ROLE_HOST)
+ return 0;
+
+ if (suspend) {
+ /* SW request low power when all usb ports allow to it ??? */
+ value = readl(xhci_regs + XECP_PM_PMCSR);
+ value &= ~PS_MASK;
+ value |= PS_D1;
+ writel(value, xhci_regs + XECP_PM_PMCSR);
+
+ /* mdctrl_clk_sel */
+ value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+ value |= MDCTRL_CLK_SEL;
+ cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+
+ /* wait for mdctrl_clk_status */
+ value = cdns_imx_readl(data, USB3_CORE_STATUS);
+ ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
+ (value & MDCTRL_CLK_STATUS) == MDCTRL_CLK_STATUS,
+ 10, 100000);
+ if (ret)
+ dev_warn(parent, "wait mdctrl_clk_status timeout\n");
+
+ /* wait lpm_clk_req to be 0 */
+ value = cdns_imx_readl(data, USB3_INT_REG);
+ ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
+ (value & LPM_CLK_REQ) != LPM_CLK_REQ,
+ 10, 100000);
+ if (ret)
+ dev_warn(parent, "wait lpm_clk_req timeout\n");
+
+ /* wait phy_refclk_req to be 0 */
+ value = cdns_imx_readl(data, USB3_SSPHY_STATUS);
+ ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
+ (value & PHY_REFCLK_REQ) != PHY_REFCLK_REQ,
+ 10, 100000);
+ if (ret)
+ dev_warn(parent, "wait phy_refclk_req timeout\n");
+
+ cdns3_set_wakeup(data, wakeup);
+ } else {
+ cdns3_set_wakeup(data, false);
+
+ /* SW request D0 */
+ value = readl(xhci_regs + XECP_PM_PMCSR);
+ value &= ~PS_MASK;
+ value |= PS_D0;
+ writel(value, xhci_regs + XECP_PM_PMCSR);
+
+ /* clr CFG_RXDET_P3_EN */
+ value = readl(xhci_regs + XECP_AUX_CTRL_REG1);
+ value &= ~CFG_RXDET_P3_EN;
+ writel(value, xhci_regs + XECP_AUX_CTRL_REG1);
+
+ /* clear mdctrl_clk_sel */
+ value = cdns_imx_readl(data, USB3_CORE_CTRL1);
+ value &= ~MDCTRL_CLK_SEL;
+ cdns_imx_writel(data, USB3_CORE_CTRL1, value);
+
+ /* wait CLK_125_REQ to be 1 */
+ value = cdns_imx_readl(data, USB3_INT_REG);
+ ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
+ (value & CLK_125_REQ) == CLK_125_REQ,
+ 10, 100000);
+ if (ret)
+ dev_warn(parent, "wait CLK_125_REQ timeout\n");
+
+ /* wait for mdctrl_clk_status is cleared */
+ value = cdns_imx_readl(data, USB3_CORE_STATUS);
+ ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
+ (value & MDCTRL_CLK_STATUS) != MDCTRL_CLK_STATUS,
+ 10, 100000);
+ if (ret)
+ dev_warn(parent, "wait mdctrl_clk_status cleared timeout\n");
+
+ /* Wait until OTG_NRDY is 0 */
+ value = readl(otg_regs + OTGSTS);
+ ret = readl_poll_timeout(otg_regs + OTGSTS, value,
+ (value & OTG_NRDY) != OTG_NRDY,
+ 10, 100000);
+ if (ret)
+ dev_warn(parent, "wait OTG ready timeout\n");
+ }
+
+ return ret;
+
+}
+
+static int cdns_imx_resume(struct device *dev)
+{
+ struct cdns_imx *data = dev_get_drvdata(dev);
+
+ return clk_bulk_prepare_enable(data->num_clks, data->clks);
+}
+
+static int cdns_imx_suspend(struct device *dev)
+{
+ struct cdns_imx *data = dev_get_drvdata(dev);
+
+ clk_bulk_disable_unprepare(data->num_clks, data->clks);
+
+ return 0;
+}
+#else
+static int cdns_imx_platform_suspend(struct device *dev,
+ bool suspend, bool wakeup)
+{
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops cdns_imx_pm_ops = {
+ SET_RUNTIME_PM_OPS(cdns_imx_suspend, cdns_imx_resume, NULL)
+};
+
static const struct of_device_id cdns_imx_of_match[] = {
{ .compatible = "fsl,imx8qm-usb3", },
{},
@@ -206,6 +386,7 @@ static struct platform_driver cdns_imx_driver = {
.driver = {
.name = "cdns3-imx",
.of_match_table = cdns_imx_of_match,
+ .pm = &cdns_imx_pm_ops,
},
};
module_platform_driver(cdns_imx_driver);
diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
index 5c1586ec7824..a0f73d4711ae 100644
--- a/drivers/usb/cdns3/core.c
+++ b/drivers/usb/cdns3/core.c
@@ -280,6 +280,10 @@ int cdns3_hw_role_switch(struct cdns3 *cdns)
enum usb_role real_role, current_role;
int ret = 0;
+ /* Depends on role switch class */
+ if (cdns->role_sw)
+ return 0;
+
pm_runtime_get_sync(cdns->dev);
current_role = cdns->role;
@@ -371,6 +375,50 @@ pm_put:
return ret;
}
+static int set_phy_power_on(struct cdns3 *cdns)
+{
+ int ret;
+
+ ret = phy_power_on(cdns->usb2_phy);
+ if (ret)
+ return ret;
+
+ ret = phy_power_on(cdns->usb3_phy);
+ if (ret)
+ phy_power_off(cdns->usb2_phy);
+
+ return ret;
+}
+
+static void set_phy_power_off(struct cdns3 *cdns)
+{
+ phy_power_off(cdns->usb3_phy);
+ phy_power_off(cdns->usb2_phy);
+}
+
+/**
+ * cdns3_wakeup_irq - interrupt handler for wakeup events
+ * @irq: irq number for cdns3 core device
+ * @data: structure of cdns3
+ *
+ * Returns IRQ_HANDLED or IRQ_NONE
+ */
+static irqreturn_t cdns3_wakeup_irq(int irq, void *data)
+{
+ struct cdns3 *cdns = data;
+
+ if (cdns->in_lpm) {
+ disable_irq_nosync(irq);
+ cdns->wakeup_pending = true;
+ if ((cdns->role == USB_ROLE_HOST) && cdns->host_dev)
+ pm_request_resume(&cdns->host_dev->dev);
+
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
/**
* cdns3_probe - probe for cdns3 core device
* @pdev: Pointer to cdns3 core platform device
@@ -397,6 +445,7 @@ static int cdns3_probe(struct platform_device *pdev)
return -ENOMEM;
cdns->dev = dev;
+ cdns->pdata = dev_get_platdata(dev);
platform_set_drvdata(pdev, cdns);
@@ -443,8 +492,21 @@ static int cdns3_probe(struct platform_device *pdev)
return -ENXIO;
}
+ cdns->phyrst_a_enable = device_property_read_bool(dev, "cdns,phyrst-a-enable");
+
cdns->otg_res = *res;
+ cdns->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
+ if (cdns->wakeup_irq == -EPROBE_DEFER)
+ return cdns->wakeup_irq;
+ else if (cdns->wakeup_irq == 0)
+ return -EINVAL;
+
+ if (cdns->wakeup_irq < 0) {
+ dev_dbg(dev, "couldn't get wakeup irq\n");
+ cdns->wakeup_irq = 0x0;
+ }
+
mutex_init(&cdns->mutex);
cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy");
@@ -463,14 +525,10 @@ static int cdns3_probe(struct platform_device *pdev)
if (ret)
goto err1;
- ret = phy_power_on(cdns->usb2_phy);
+ ret = set_phy_power_on(cdns);
if (ret)
goto err2;
- ret = phy_power_on(cdns->usb3_phy);
- if (ret)
- goto err3;
-
sw_desc.set = cdns3_role_set;
sw_desc.get = cdns3_role_get;
sw_desc.allow_userspace_control = true;
@@ -482,20 +540,34 @@ static int cdns3_probe(struct platform_device *pdev)
if (IS_ERR(cdns->role_sw)) {
ret = PTR_ERR(cdns->role_sw);
dev_warn(dev, "Unable to register Role Switch\n");
- goto err4;
+ goto err3;
+ }
+
+ if (cdns->wakeup_irq) {
+ ret = devm_request_irq(cdns->dev, cdns->wakeup_irq,
+ cdns3_wakeup_irq,
+ IRQF_SHARED,
+ dev_name(cdns->dev), cdns);
+
+ if (ret) {
+ dev_err(cdns->dev, "couldn't register wakeup irq handler\n");
+ goto err3;
+ }
}
ret = cdns3_drd_init(cdns);
if (ret)
- goto err5;
+ goto err4;
ret = cdns3_core_init_role(cdns);
if (ret)
- goto err5;
+ goto err4;
+ spin_lock_init(&cdns->lock);
device_set_wakeup_capable(dev, true);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+ pm_runtime_forbid(dev);
/*
* The controller needs less time between bus and controller suspend,
@@ -508,14 +580,11 @@ static int cdns3_probe(struct platform_device *pdev)
dev_dbg(dev, "Cadence USB3 core: probe succeed\n");
return 0;
-err5:
+err4:
cdns3_drd_exit(cdns);
usb_role_switch_unregister(cdns->role_sw);
-err4:
- phy_power_off(cdns->usb3_phy);
-
err3:
- phy_power_off(cdns->usb2_phy);
+ set_phy_power_off(cdns);
err2:
phy_exit(cdns->usb3_phy);
err1:
@@ -539,59 +608,128 @@ static int cdns3_remove(struct platform_device *pdev)
pm_runtime_put_noidle(&pdev->dev);
cdns3_exit_roles(cdns);
usb_role_switch_unregister(cdns->role_sw);
- phy_power_off(cdns->usb2_phy);
- phy_power_off(cdns->usb3_phy);
+ set_phy_power_off(cdns);
phy_exit(cdns->usb2_phy);
phy_exit(cdns->usb3_phy);
return 0;
}
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
-static int cdns3_suspend(struct device *dev)
+static int cdns3_set_platform_suspend(struct device *dev,
+ bool suspend, bool wakeup)
+{
+ struct cdns3 *cdns = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (cdns->pdata && cdns->pdata->platform_suspend)
+ ret = cdns->pdata->platform_suspend(dev, suspend, wakeup);
+
+ return ret;
+}
+
+static int cdns3_controller_suspend(struct device *dev, pm_message_t msg)
{
struct cdns3 *cdns = dev_get_drvdata(dev);
+ bool wakeup;
unsigned long flags;
- if (cdns->role == USB_ROLE_HOST)
+ if (cdns->in_lpm)
return 0;
- if (pm_runtime_status_suspended(dev))
- pm_runtime_resume(dev);
+ if (PMSG_IS_AUTO(msg))
+ wakeup = true;
+ else
+ wakeup = device_may_wakeup(dev);
- if (cdns->roles[cdns->role]->suspend) {
- spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
- cdns->roles[cdns->role]->suspend(cdns, false);
- spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
- }
+ cdns3_set_platform_suspend(cdns->dev, true, wakeup);
+ set_phy_power_off(cdns);
+ spin_lock_irqsave(&cdns->lock, flags);
+ cdns->in_lpm = true;
+ spin_unlock_irqrestore(&cdns->lock, flags);
+ dev_dbg(cdns->dev, "%s ends\n", __func__);
return 0;
}
-static int cdns3_resume(struct device *dev)
+static int cdns3_controller_resume(struct device *dev, pm_message_t msg)
{
struct cdns3 *cdns = dev_get_drvdata(dev);
+ int ret;
unsigned long flags;
- if (cdns->role == USB_ROLE_HOST)
+ if (!cdns->in_lpm)
return 0;
- if (cdns->roles[cdns->role]->resume) {
- spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
+ ret = set_phy_power_on(cdns);
+ if (ret)
+ return ret;
+
+ cdns3_set_platform_suspend(cdns->dev, false, false);
+
+ spin_lock_irqsave(&cdns->lock, flags);
+ if (cdns->roles[cdns->role]->resume && !PMSG_IS_AUTO(msg))
cdns->roles[cdns->role]->resume(cdns, false);
- spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
+
+ cdns->in_lpm = false;
+ spin_unlock_irqrestore(&cdns->lock, flags);
+ if (cdns->wakeup_pending) {
+ cdns->wakeup_pending = false;
+ enable_irq(cdns->wakeup_irq);
+ }
+ dev_dbg(cdns->dev, "%s ends\n", __func__);
+
+ return ret;
+}
+
+static int cdns3_runtime_suspend(struct device *dev)
+{
+ return cdns3_controller_suspend(dev, PMSG_AUTO_SUSPEND);
+}
+
+static int cdns3_runtime_resume(struct device *dev)
+{
+ return cdns3_controller_resume(dev, PMSG_AUTO_RESUME);
+}
+#ifdef CONFIG_PM_SLEEP
+
+static int cdns3_suspend(struct device *dev)
+{
+ struct cdns3 *cdns = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ if (pm_runtime_status_suspended(dev))
+ pm_runtime_resume(dev);
+
+ if (cdns->roles[cdns->role]->suspend) {
+ spin_lock_irqsave(&cdns->lock, flags);
+ cdns->roles[cdns->role]->suspend(cdns, false);
+ spin_unlock_irqrestore(&cdns->lock, flags);
}
+ return cdns3_controller_suspend(dev, PMSG_SUSPEND);
+}
+
+static int cdns3_resume(struct device *dev)
+{
+ int ret;
+
+ ret = cdns3_controller_resume(dev, PMSG_RESUME);
+ if (ret)
+ return ret;
+
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
- return 0;
+ return ret;
}
-#endif
+#endif /* CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM */
static const struct dev_pm_ops cdns3_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(cdns3_suspend, cdns3_resume)
+ SET_RUNTIME_PM_OPS(cdns3_runtime_suspend, cdns3_runtime_resume, NULL)
};
#ifdef CONFIG_OF
diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
index 1ad1f1fe61e9..8a40d53d5ede 100644
--- a/drivers/usb/cdns3/core.h
+++ b/drivers/usb/cdns3/core.h
@@ -38,6 +38,12 @@ struct cdns3_role_driver {
};
#define CDNS3_XHCI_RESOURCES_NUM 2
+
+struct cdns3_platform_data {
+ int (*platform_suspend)(struct device *dev,
+ bool suspend, bool wakeup);
+};
+
/**
* struct cdns3 - Representation of Cadence USB3 DRD controller.
* @dev: pointer to Cadence device struct
@@ -50,6 +56,7 @@ struct cdns3_role_driver {
* @otg_regs: pointer to base of otg registers
* @otg_irq: irq number for otg controller
* @dev_irq: irq number for device controller
+ * @wakeup_irq: irq number for wakeup event, it is optional
* @roles: array of supported roles for this controller
* @role: current role
* @host_dev: the child host device pointer for cdns3 core
@@ -62,6 +69,10 @@ struct cdns3_role_driver {
* This field based on firmware setting, kernel configuration
* and hardware configuration.
* @role_sw: pointer to role switch object.
+ * @in_lpm: indicate the controller is in low power mode
+ * @wakeup_pending: wakeup interrupt pending
+ * @pdata: platform data from glue layer
+ * @lock: spinlock structure
*/
struct cdns3 {
struct device *dev;
@@ -76,9 +87,11 @@ struct cdns3 {
#define CDNS3_CONTROLLER_V0 0
#define CDNS3_CONTROLLER_V1 1
u32 version;
+ bool phyrst_a_enable;
int otg_irq;
int dev_irq;
+ int wakeup_irq;
struct cdns3_role_driver *roles[USB_ROLE_DEVICE + 1];
enum usb_role role;
struct platform_device *host_dev;
@@ -89,6 +102,10 @@ struct cdns3 {
struct mutex mutex;
enum usb_dr_mode dr_mode;
struct usb_role_switch *role_sw;
+ bool in_lpm;
+ bool wakeup_pending;
+ struct cdns3_platform_data *pdata;
+ spinlock_t lock;
};
int cdns3_hw_role_switch(struct cdns3 *cdns);
diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
index 6234bcd6158a..38ccd29e4cde 100644
--- a/drivers/usb/cdns3/drd.c
+++ b/drivers/usb/cdns3/drd.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/iopoll.h>
#include <linux/usb/otg.h>
+#include <linux/phy/phy.h>
#include "gadget.h"
#include "drd.h"
@@ -42,6 +43,18 @@ int cdns3_set_mode(struct cdns3 *cdns, enum usb_dr_mode mode)
reg = readl(&cdns->otg_v1_regs->override);
reg |= OVERRIDE_IDPULLUP;
writel(reg, &cdns->otg_v1_regs->override);
+
+ /*
+ * Enable work around feature built into the
+ * controller to address issue with RX Sensitivity
+ * est (EL_17) for USB2 PHY. The issue only occures
+ * for 0x0002450D controller version.
+ */
+ if (cdns->phyrst_a_enable) {
+ reg = readl(&cdns->otg_v1_regs->phyrst_cfg);
+ reg |= PHYRST_CFG_PHYRST_A_ENABLE;
+ writel(reg, &cdns->otg_v1_regs->phyrst_cfg);
+ }
} else {
reg = readl(&cdns->otg_v0_regs->ctrl1);
reg |= OVERRIDE_IDPULLUP_V0;
@@ -145,6 +158,7 @@ int cdns3_drd_host_on(struct cdns3 *cdns)
if (ret)
dev_err(cdns->dev, "timeout waiting for xhci_ready\n");
+ phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_HOST);
return ret;
}
@@ -164,6 +178,7 @@ void cdns3_drd_host_off(struct cdns3 *cdns)
readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
!(val & OTGSTATE_HOST_STATE_MASK),
1, 2000000);
+ phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
}
/**
@@ -190,6 +205,7 @@ int cdns3_drd_gadget_on(struct cdns3 *cdns)
return ret;
}
+ phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_DEVICE);
return 0;
}
@@ -213,6 +229,7 @@ void cdns3_drd_gadget_off(struct cdns3 *cdns)
readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
!(val & OTGSTATE_DEV_STATE_MASK),
1, 2000000);
+ phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
}
/**
@@ -293,6 +310,9 @@ static irqreturn_t cdns3_drd_irq(int irq, void *data)
if (cdns->dr_mode != USB_DR_MODE_OTG)
return IRQ_NONE;
+ if (cdns->in_lpm)
+ return ret;
+
reg = readl(&cdns->otg_regs->ivect);
if (!reg)
diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h
index 7e7cf7fa2dd3..f1ccae285a16 100644
--- a/drivers/usb/cdns3/drd.h
+++ b/drivers/usb/cdns3/drd.h
@@ -31,7 +31,7 @@ struct cdns3_otg_regs {
__le32 simulate;
__le32 override;
__le32 susp_ctrl;
- __le32 reserved4;
+ __le32 phyrst_cfg;
__le32 anasts;
__le32 adp_ramp_time;
__le32 ctrl1;
@@ -153,6 +153,9 @@ struct cdns3_otg_common_regs {
/* Only for CDNS3_CONTROLLER_V0 version */
#define OVERRIDE_IDPULLUP_V0 BIT(24)
+/* PHYRST_CFG - bitmasks */
+#define PHYRST_CFG_PHYRST_A_ENABLE BIT(0)
+
#define CDNS3_ID_PERIPHERAL 1
#define CDNS3_ID_HOST 0
diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
index d9779abc65b2..4761c852d9c4 100644
--- a/drivers/usb/cdns3/ep0.c
+++ b/drivers/usb/cdns3/ep0.c
@@ -717,9 +717,17 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
/* send STATUS stage. Should be called only for SET_CONFIGURATION */
if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) {
+ u32 val;
+
cdns3_select_ep(priv_dev, 0x00);
cdns3_set_hw_configuration(priv_dev);
cdns3_ep0_complete_setup(priv_dev, 0, 1);
+ /* wait until configuration set */
+ ret = readl_poll_timeout_atomic(&priv_dev->regs->usb_sts, val,
+ val & USB_STS_CFGSTS_MASK, 1, 100);
+ if (ret == -ETIMEDOUT)
+ dev_warn(priv_dev->dev, "timeout for waiting configuration set\n");
+
request->actual = 0;
priv_dev->status_completion_no_call = true;
priv_dev->pending_status_request = request;
@@ -731,7 +739,7 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
* ep0_queue is back.
*/
queue_work(system_freezable_wq, &priv_dev->pending_status_wq);
- return 0;
+ return ret;
}
if (!list_empty(&priv_ep->pending_req_list)) {
diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
index dea649ee173b..6e7b70a2e352 100644
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -261,8 +261,8 @@ int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep)
*/
link_trb->control = 0;
} else {
- link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma);
- link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE;
+ link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma));
+ link_trb->control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE);
}
return 0;
}
@@ -462,6 +462,36 @@ static int cdns3_start_all_request(struct cdns3_device *priv_dev,
(reg) |= EP_STS_EN_DESCMISEN; \
} } while (0)
+static void __cdns3_descmiss_copy_data(struct usb_request *request,
+ struct usb_request *descmiss_req)
+{
+ int length = request->actual + descmiss_req->actual;
+ struct scatterlist *s = request->sg;
+
+ if (!s) {
+ if (length <= request->length) {
+ memcpy(&((u8 *)request->buf)[request->actual],
+ descmiss_req->buf,
+ descmiss_req->actual);
+ request->actual = length;
+ } else {
+ /* It should never occures */
+ request->status = -ENOMEM;
+ }
+ } else {
+ if (length <= sg_dma_len(s)) {
+ void *p = phys_to_virt(sg_dma_address(s));
+
+ memcpy(&((u8 *)p)[request->actual],
+ descmiss_req->buf,
+ descmiss_req->actual);
+ request->actual = length;
+ } else {
+ request->status = -ENOMEM;
+ }
+ }
+}
+
/**
* cdns3_wa2_descmiss_copy_data copy data from internal requests to
* request queued by class driver.
@@ -488,21 +518,9 @@ static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep,
chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH;
length = request->actual + descmiss_req->actual;
-
request->status = descmiss_req->status;
-
- if (length <= request->length) {
- memcpy(&((u8 *)request->buf)[request->actual],
- descmiss_req->buf,
- descmiss_req->actual);
- request->actual = length;
- } else {
- /* It should never occures */
- request->status = -ENOMEM;
- }
-
+ __cdns3_descmiss_copy_data(request, descmiss_req);
list_del_init(&descmiss_priv_req->list);
-
kfree(descmiss_req->buf);
cdns3_gadget_ep_free_request(&priv_ep->endpoint, descmiss_req);
--priv_ep->wa2_counter;
@@ -817,6 +835,8 @@ void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
request->length);
priv_req->flags &= ~(REQUEST_PENDING | REQUEST_UNALIGNED);
+ /* All TRBs have finished, clear the counter */
+ priv_req->finished_trb = 0;
trace_cdns3_gadget_giveback(priv_req);
if (priv_dev->dev_ver < DEV_VER_V2) {
@@ -847,10 +867,10 @@ static void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep)
priv_ep->wa1_trb_index = 0xFFFF;
if (priv_ep->wa1_cycle_bit) {
priv_ep->wa1_trb->control =
- priv_ep->wa1_trb->control | 0x1;
+ priv_ep->wa1_trb->control | cpu_to_le32(0x1);
} else {
priv_ep->wa1_trb->control =
- priv_ep->wa1_trb->control & ~0x1;
+ priv_ep->wa1_trb->control & cpu_to_le32(~0x1);
}
}
}
@@ -1008,17 +1028,16 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
TRB_STREAM_ID(priv_req->request.stream_id) | TRB_ISP;
if (!request->num_sgs) {
- trb->buffer = TRB_BUFFER(trb_dma);
+ trb->buffer = cpu_to_le32(TRB_BUFFER(trb_dma));
length = request->length;
} else {
- trb->buffer = TRB_BUFFER(request->sg[sg_idx].dma_address);
+ trb->buffer = cpu_to_le32(TRB_BUFFER(request->sg[sg_idx].dma_address));
length = request->sg[sg_idx].length;
}
tdl = DIV_ROUND_UP(length, priv_ep->endpoint.maxpacket);
- trb->length = TRB_BURST_LEN(16 /*priv_ep->trb_burst_size*/) |
- TRB_LEN(length);
+ trb->length = cpu_to_le32(TRB_BURST_LEN(16) | TRB_LEN(length));
/*
* For DEV_VER_V2 controller version we have enabled
@@ -1027,11 +1046,11 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
*/
if (priv_dev->dev_ver >= DEV_VER_V2) {
if (priv_dev->gadget.speed == USB_SPEED_SUPER)
- trb->length |= TRB_TDL_SS_SIZE(tdl);
+ trb->length |= cpu_to_le32(TRB_TDL_SS_SIZE(tdl));
}
priv_req->flags |= REQUEST_PENDING;
- trb->control = control;
+ trb->control = cpu_to_le32(control);
trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
@@ -1091,6 +1110,7 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
struct cdns3_request *priv_req;
struct cdns3_trb *trb;
+ struct cdns3_trb *link_trb;
dma_addr_t trb_dma;
u32 togle_pcs = 1;
int sg_iter = 0;
@@ -1099,11 +1119,13 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
u32 control;
int pcs;
u16 total_tdl = 0;
+ struct scatterlist *s = NULL;
+ bool sg_supported = !!(request->num_mapped_sgs);
if (priv_ep->type == USB_ENDPOINT_XFER_ISOC)
num_trb = priv_ep->interval;
else
- num_trb = request->num_sgs ? request->num_sgs : 1;
+ num_trb = sg_supported ? request->num_mapped_sgs : 1;
if (num_trb > priv_ep->free_trbs) {
priv_ep->flags |= EP_RING_FULL;
@@ -1129,7 +1151,6 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
/* prepare ring */
if ((priv_ep->enqueue + num_trb) >= (priv_ep->num_trbs - 1)) {
- struct cdns3_trb *link_trb;
int doorbell, dma_index;
u32 ch_bit = 0;
@@ -1156,13 +1177,16 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
TRBS_PER_SEGMENT > 2)
ch_bit = TRB_CHAIN;
- link_trb->control = ((priv_ep->pcs) ? TRB_CYCLE : 0) |
- TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit;
+ link_trb->control = cpu_to_le32(((priv_ep->pcs) ? TRB_CYCLE : 0) |
+ TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit);
}
if (priv_dev->dev_ver <= DEV_VER_V2)
togle_pcs = cdns3_wa1_update_guard(priv_ep, trb);
+ if (sg_supported)
+ s = request->sg;
+
/* set incorrect Cycle Bit for first trb*/
control = priv_ep->pcs ? 0 : TRB_CYCLE;
@@ -1172,13 +1196,13 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
/* fill TRB */
control |= TRB_TYPE(TRB_NORMAL);
- trb->buffer = TRB_BUFFER(request->num_sgs == 0
- ? trb_dma : request->sg[sg_iter].dma_address);
-
- if (likely(!request->num_sgs))
+ if (sg_supported) {
+ trb->buffer = cpu_to_le32(TRB_BUFFER(sg_dma_address(s)));
+ length = sg_dma_len(s);
+ } else {
+ trb->buffer = cpu_to_le32(TRB_BUFFER(trb_dma));
length = request->length;
- else
- length = request->sg[sg_iter].length;
+ }
if (likely(priv_dev->dev_ver >= DEV_VER_V2))
td_size = DIV_ROUND_UP(length,
@@ -1187,10 +1211,10 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
total_tdl += DIV_ROUND_UP(length,
priv_ep->endpoint.maxpacket);
- trb->length = TRB_BURST_LEN(priv_ep->trb_burst_size) |
- TRB_LEN(length);
+ trb->length = cpu_to_le32(TRB_BURST_LEN(priv_ep->trb_burst_size) |
+ TRB_LEN(length));
if (priv_dev->gadget.speed == USB_SPEED_SUPER)
- trb->length |= TRB_TDL_SS_SIZE(td_size);
+ trb->length |= cpu_to_le32(TRB_TDL_SS_SIZE(td_size));
else
control |= TRB_TDL_HS_SIZE(td_size);
@@ -1212,9 +1236,18 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
}
if (sg_iter)
- trb->control = control;
+ trb->control = cpu_to_le32(control);
else
- priv_req->trb->control = control;
+ priv_req->trb->control = cpu_to_le32(control);
+
+ if (sg_supported) {
+ trb->control |= TRB_ISP;
+ /* Don't set chain bit for last TRB */
+ if (sg_iter < num_trb - 1)
+ trb->control |= TRB_CHAIN;
+
+ s = sg_next(s);
+ }
control = 0;
++sg_iter;
@@ -1226,9 +1259,10 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
trb = priv_req->trb;
priv_req->flags |= REQUEST_PENDING;
+ priv_req->num_of_trb = num_trb;
if (sg_iter == 1)
- trb->control |= TRB_IOC | TRB_ISP;
+ trb->control |= cpu_to_le32(TRB_IOC | TRB_ISP);
if (priv_dev->dev_ver < DEV_VER_V2 &&
(priv_ep->flags & EP_TDLCHK_EN)) {
@@ -1254,12 +1288,27 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
/* give the TD to the consumer*/
if (togle_pcs)
- trb->control = trb->control ^ 1;
+ trb->control = trb->control ^ cpu_to_le32(1);
if (priv_dev->dev_ver <= DEV_VER_V2)
cdns3_wa1_tray_restore_cycle_bit(priv_dev, priv_ep);
- trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
+ if (num_trb > 1) {
+ int i = 0;
+
+ while (i < num_trb) {
+ trace_cdns3_prepare_trb(priv_ep, trb + i);
+ if (trb + i == link_trb) {
+ trb = priv_ep->trb_pool;
+ num_trb = num_trb - i;
+ i = 0;
+ } else {
+ i++;
+ }
+ }
+ } else {
+ trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
+ }
/*
* Memory barrier - Cycle Bit must be set before trb->length and
@@ -1310,7 +1359,6 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
{
struct cdns3_endpoint *priv_ep;
struct usb_ep *ep;
- int val;
if (priv_dev->hw_configured_flag)
return;
@@ -1320,10 +1368,6 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
cdns3_set_register_bit(&priv_dev->regs->usb_conf,
USB_CONF_U1EN | USB_CONF_U2EN);
- /* wait until configuration set */
- readl_poll_timeout_atomic(&priv_dev->regs->usb_sts, val,
- val & USB_STS_CFGSTS_MASK, 1, 100);
-
priv_dev->hw_configured_flag = 1;
list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
@@ -1337,7 +1381,7 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
}
/**
- * cdns3_request_handled - check whether request has been handled by DMA
+ * cdns3_trb_handled - check whether trb has been handled by DMA
*
* @priv_ep: extended endpoint object.
* @priv_req: request object for checking
@@ -1354,32 +1398,28 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
* ET = priv_req->end_trb - index of last TRB in transfer ring
* CI = current_index - index of processed TRB by DMA.
*
- * As first step, function checks if cycle bit for priv_req->start_trb is
- * correct.
+ * As first step, we check if the TRB between the ST and ET.
+ * Then, we check if cycle bit for index priv_ep->dequeue
+ * is correct.
*
* some rules:
- * 1. priv_ep->dequeue never exceed current_index.
+ * 1. priv_ep->dequeue never equals to current_index.
* 2 priv_ep->enqueue never exceed priv_ep->dequeue
* 3. exception: priv_ep->enqueue == priv_ep->dequeue
* and priv_ep->free_trbs is zero.
* This case indicate that TR is full.
*
- * Then We can split recognition into two parts:
+ * At below two cases, the request have been handled.
* Case 1 - priv_ep->dequeue < current_index
* SR ... EQ ... DQ ... CI ... ER
* SR ... DQ ... CI ... EQ ... ER
*
- * Request has been handled by DMA if ST and ET is between DQ and CI.
- *
* Case 2 - priv_ep->dequeue > current_index
- * This situation take place when CI go through the LINK TRB at the end of
+ * This situation takes place when CI go through the LINK TRB at the end of
* transfer ring.
* SR ... CI ... EQ ... DQ ... ER
- *
- * Request has been handled by DMA if ET is less then CI or
- * ET is greater or equal DQ.
*/
-static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep,
+static bool cdns3_trb_handled(struct cdns3_endpoint *priv_ep,
struct cdns3_request *priv_req)
{
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
@@ -1391,9 +1431,27 @@ static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep,
current_index = cdns3_get_dma_pos(priv_dev, priv_ep);
doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
- trb = &priv_ep->trb_pool[priv_req->start_trb];
+ /* current trb doesn't belong to this request */
+ if (priv_req->start_trb < priv_req->end_trb) {
+ if (priv_ep->dequeue > priv_req->end_trb)
+ goto finish;
+
+ if (priv_ep->dequeue < priv_req->start_trb)
+ goto finish;
+ }
+
+ if ((priv_req->start_trb > priv_req->end_trb) &&
+ (priv_ep->dequeue > priv_req->end_trb) &&
+ (priv_ep->dequeue < priv_req->start_trb))
+ goto finish;
- if ((trb->control & TRB_CYCLE) != priv_ep->ccs)
+ if ((priv_req->start_trb == priv_req->end_trb) &&
+ (priv_ep->dequeue != priv_req->end_trb))
+ goto finish;
+
+ trb = &priv_ep->trb_pool[priv_ep->dequeue];
+
+ if ((le32_to_cpu(trb->control) & TRB_CYCLE) != priv_ep->ccs)
goto finish;
if (doorbell == 1 && current_index == priv_ep->dequeue)
@@ -1413,12 +1471,8 @@ static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep,
!priv_ep->dequeue)
goto finish;
- if (priv_req->end_trb >= priv_ep->dequeue &&
- priv_req->end_trb < current_index)
- handled = 1;
+ handled = 1;
} else if (priv_ep->dequeue > current_index) {
- if (priv_req->end_trb < current_index ||
- priv_req->end_trb >= priv_ep->dequeue)
handled = 1;
}
@@ -1434,6 +1488,8 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
struct cdns3_request *priv_req;
struct usb_request *request;
struct cdns3_trb *trb;
+ bool request_handled = false;
+ bool transfer_end = false;
while (!list_empty(&priv_ep->pending_req_list)) {
request = cdns3_next_request(&priv_ep->pending_req_list);
@@ -1442,7 +1498,7 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
trb = priv_ep->trb_pool + priv_ep->dequeue;
/* Request was dequeued and TRB was changed to TRB_LINK. */
- if (TRB_FIELD_TO_TYPE(trb->control) == TRB_LINK) {
+ if (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) {
trace_cdns3_complete_trb(priv_ep, trb);
cdns3_move_deq_to_next_trb(priv_req);
}
@@ -1453,20 +1509,32 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
*/
cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
- if (!cdns3_request_handled(priv_ep, priv_req))
- goto prepare_next_td;
+ while (cdns3_trb_handled(priv_ep, priv_req)) {
+ priv_req->finished_trb++;
+ if (priv_req->finished_trb >= priv_req->num_of_trb)
+ request_handled = true;
- trb = priv_ep->trb_pool + priv_ep->dequeue;
- trace_cdns3_complete_trb(priv_ep, trb);
+ trb = priv_ep->trb_pool + priv_ep->dequeue;
+ trace_cdns3_complete_trb(priv_ep, trb);
- if (trb != priv_req->trb)
- dev_warn(priv_dev->dev,
- "request_trb=0x%p, queue_trb=0x%p\n",
- priv_req->trb, trb);
+ if (!transfer_end)
+ request->actual +=
+ TRB_LEN(le32_to_cpu(trb->length));
- request->actual = TRB_LEN(le32_to_cpu(trb->length));
- cdns3_move_deq_to_next_trb(priv_req);
- cdns3_gadget_giveback(priv_ep, priv_req, 0);
+ if (priv_req->num_of_trb > 1 &&
+ le32_to_cpu(trb->control) & TRB_SMM)
+ transfer_end = true;
+
+ cdns3_ep_inc_deq(priv_ep);
+ }
+
+ if (request_handled) {
+ cdns3_gadget_giveback(priv_ep, priv_req, 0);
+ request_handled = false;
+ transfer_end = false;
+ } else {
+ goto prepare_next_td;
+ }
if (priv_ep->type != USB_ENDPOINT_XFER_ISOC &&
TRBS_PER_SEGMENT == 2)
@@ -1574,7 +1642,7 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep)
* that host ignore the ERDY packet and driver has to send it
* again.
*/
- if (tdl && (dbusy | !EP_STS_BUFFEMPTY(ep_sts_reg) |
+ if (tdl && (dbusy || !EP_STS_BUFFEMPTY(ep_sts_reg) ||
EP_STS_HOSTPP(ep_sts_reg))) {
writel(EP_CMD_ERDY |
EP_CMD_ERDY_SID(priv_ep->last_stream_id),
@@ -1769,9 +1837,13 @@ static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev,
static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
{
struct cdns3_device *priv_dev = data;
+ struct cdns3 *cdns = dev_get_drvdata(priv_dev->dev);
irqreturn_t ret = IRQ_NONE;
u32 reg;
+ if (cdns->in_lpm)
+ return ret;
+
/* check USB device interrupt */
reg = readl(&priv_dev->regs->usb_ists);
if (reg) {
@@ -2552,10 +2624,10 @@ found:
/* Update ring only if removed request is on pending_req_list list */
if (req_on_hw_ring && link_trb) {
- link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma +
- ((priv_req->end_trb + 1) * TRB_SIZE));
- link_trb->control = (link_trb->control & TRB_CYCLE) |
- TRB_TYPE(TRB_LINK) | TRB_CHAIN;
+ link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma +
+ ((priv_req->end_trb + 1) * TRB_SIZE)));
+ link_trb->control = cpu_to_le32((le32_to_cpu(link_trb->control) & TRB_CYCLE) |
+ TRB_TYPE(TRB_LINK) | TRB_CHAIN);
if (priv_ep->wa1_trb == priv_req->trb)
cdns3_wa1_restore_cycle_bit(priv_ep);
@@ -2610,7 +2682,7 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
priv_req = to_cdns3_request(request);
trb = priv_req->trb;
if (trb)
- trb->control = trb->control ^ TRB_CYCLE;
+ trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE);
}
writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
@@ -2625,7 +2697,8 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
if (request) {
if (trb)
- trb->control = trb->control ^ TRB_CYCLE;
+ trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE);
+
cdns3_rearm_transfer(priv_ep, 1);
}
@@ -2735,10 +2808,13 @@ static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on)
{
struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
- if (is_on)
+ if (is_on) {
writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf);
- else
+ } else {
+ writel(~0, &priv_dev->regs->ep_ists);
+ writel(~0, &priv_dev->regs->usb_ists);
writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
+ }
return 0;
}
@@ -2779,6 +2855,8 @@ static void cdns3_gadget_config(struct cdns3_device *priv_dev)
/* enable generic interrupt*/
writel(USB_IEN_INIT, &regs->usb_ien);
writel(USB_CONF_CLK2OFFDS | USB_CONF_L1DS, &regs->usb_conf);
+ /* keep Fast Access bit */
+ writel(PUSB_PWR_FST_REG_ACCESS, &priv_dev->regs->usb_pwr);
cdns3_configure_dmult(priv_dev, NULL);
}
@@ -2862,6 +2940,7 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
/* disable interrupt for device */
writel(0, &priv_dev->regs->usb_ien);
+ writel(0, &priv_dev->regs->usb_pwr);
writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
return 0;
@@ -2984,18 +3063,26 @@ err:
return -ENOMEM;
}
+static void cdns3_gadget_release(struct device *dev)
+{
+ struct cdns3_device *priv_dev = container_of(dev,
+ struct cdns3_device, gadget.dev);
+
+ kfree(priv_dev);
+}
+
void cdns3_gadget_exit(struct cdns3 *cdns)
{
struct cdns3_device *priv_dev;
priv_dev = cdns->gadget_dev;
- devm_free_irq(cdns->dev, cdns->dev_irq, priv_dev);
pm_runtime_mark_last_busy(cdns->dev);
pm_runtime_put_autosuspend(cdns->dev);
- usb_del_gadget_udc(&priv_dev->gadget);
+ usb_del_gadget(&priv_dev->gadget);
+ devm_free_irq(cdns->dev, cdns->dev_irq, priv_dev);
cdns3_free_all_eps(priv_dev);
@@ -3015,7 +3102,7 @@ void cdns3_gadget_exit(struct cdns3 *cdns)
priv_dev->setup_dma);
kfree(priv_dev->zlp_buf);
- kfree(priv_dev);
+ usb_put_gadget(&priv_dev->gadget);
cdns->gadget_dev = NULL;
cdns3_drd_gadget_off(cdns);
}
@@ -3030,6 +3117,8 @@ static int cdns3_gadget_start(struct cdns3 *cdns)
if (!priv_dev)
return -ENOMEM;
+ usb_initialize_gadget(cdns->dev, &priv_dev->gadget,
+ cdns3_gadget_release);
cdns->gadget_dev = priv_dev;
priv_dev->sysdev = cdns->dev;
priv_dev->dev = cdns->dev;
@@ -3070,7 +3159,6 @@ static int cdns3_gadget_start(struct cdns3 *cdns)
priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
priv_dev->gadget.ops = &cdns3_gadget_ops;
priv_dev->gadget.name = "usb-ss-gadget";
- priv_dev->gadget.sg_supported = 1;
priv_dev->gadget.quirk_avoids_skb_reserve = 1;
priv_dev->gadget.irq = cdns->dev_irq;
@@ -3109,6 +3197,8 @@ static int cdns3_gadget_start(struct cdns3 *cdns)
readl(&priv_dev->regs->usb_cap2));
priv_dev->dev_ver = GET_DEV_BASE_VERSION(priv_dev->dev_ver);
+ if (priv_dev->dev_ver >= DEV_VER_V2)
+ priv_dev->gadget.sg_supported = 1;
priv_dev->zlp_buf = kzalloc(CDNS3_EP_ZLP_BUF_SIZE, GFP_KERNEL);
if (!priv_dev->zlp_buf) {
@@ -3117,10 +3207,9 @@ static int cdns3_gadget_start(struct cdns3 *cdns)
}
/* add USB gadget device */
- ret = usb_add_gadget_udc(priv_dev->dev, &priv_dev->gadget);
+ ret = usb_add_gadget(&priv_dev->gadget);
if (ret < 0) {
- dev_err(priv_dev->dev,
- "Failed to register USB device controller\n");
+ dev_err(priv_dev->dev, "Failed to add gadget\n");
goto err4;
}
@@ -3133,6 +3222,7 @@ err3:
err2:
cdns3_free_all_eps(priv_dev);
err1:
+ usb_put_gadget(&priv_dev->gadget);
cdns->gadget_dev = NULL;
return ret;
}
diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h
index 52765b098b9e..1ccecd237530 100644
--- a/drivers/usb/cdns3/gadget.h
+++ b/drivers/usb/cdns3/gadget.h
@@ -966,7 +966,7 @@ struct cdns3_usb_regs {
/*
* USBSS-DEV DMA interface.
*/
-#define TRBS_PER_SEGMENT 40
+#define TRBS_PER_SEGMENT 600
#define ISO_MAX_INTERVAL 10
@@ -1030,6 +1030,11 @@ struct cdns3_trb {
* When set to '1', the device will toggle its interpretation of the Cycle bit
*/
#define TRB_TOGGLE BIT(1)
+/*
+ * The controller will set it if OUTSMM (OUT size mismatch) is detected,
+ * this bit is for normal TRB
+ */
+#define TRB_SMM BIT(1)
/*
* Short Packet (SP). OUT EPs at DMULT=1 only. Indicates if the TRB was
@@ -1215,6 +1220,8 @@ struct cdns3_aligned_buf {
* this endpoint
* @flags: flag specifying special usage of request
* @list: used by internally allocated request to add to wa2_descmiss_req_list.
+ * @finished_trb: number of trb has already finished per request
+ * @num_of_trb: how many trbs in this request
*/
struct cdns3_request {
struct usb_request request;
@@ -1230,6 +1237,8 @@ struct cdns3_request {
#define REQUEST_UNALIGNED BIT(4)
u32 flags;
struct list_head list;
+ int finished_trb;
+ int num_of_trb;
};
#define to_cdns3_request(r) (container_of(r, struct cdns3_request, request))
diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
index 36c63d9ecd37..b3e2cb69762c 100644
--- a/drivers/usb/cdns3/host.c
+++ b/drivers/usb/cdns3/host.c
@@ -13,11 +13,13 @@
#include "core.h"
#include "drd.h"
#include "host-export.h"
+#include <linux/usb/hcd.h>
static int __cdns3_host_init(struct cdns3 *cdns)
{
struct platform_device *xhci;
int ret;
+ struct usb_hcd *hcd;
cdns3_drd_host_on(cdns);
@@ -43,6 +45,11 @@ static int __cdns3_host_init(struct cdns3 *cdns)
goto err1;
}
+ /* Glue needs to access xHCI region register for Power management */
+ hcd = platform_get_drvdata(xhci);
+ if (hcd)
+ cdns->xhci_regs = hcd->regs;
+
return 0;
err1:
platform_device_put(xhci);
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index c39e2b615ac6..25c65accf089 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -165,6 +165,11 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
data->ulpi = 1;
+ of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
+ &data->emp_curr_control);
+ of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
+ &data->dc_vol_level_adjust);
+
return data;
}
@@ -609,7 +614,12 @@ static int __maybe_unused ci_hdrc_imx_suspend(struct device *dev)
}
}
- return imx_controller_suspend(dev);
+ ret = imx_controller_suspend(dev);
+ if (ret)
+ return ret;
+
+ pinctrl_pm_select_sleep_state(dev);
+ return ret;
}
static int __maybe_unused ci_hdrc_imx_resume(struct device *dev)
@@ -617,6 +627,7 @@ static int __maybe_unused ci_hdrc_imx_resume(struct device *dev)
struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
int ret;
+ pinctrl_pm_select_default_state(dev);
ret = imx_controller_resume(dev);
if (!ret && data->supports_runtime_pm) {
pm_runtime_disable(dev);
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index 99f846119c00..999c65390b7f 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -26,6 +26,8 @@ struct imx_usbmisc_data {
unsigned int ext_vbus:1; /* Vbus from exteranl event */
struct usb_phy *usb_phy;
enum usb_dr_mode available_role; /* runtime usb dr mode */
+ int emp_curr_control;
+ int dc_vol_level_adjust;
};
int imx_usbmisc_init(struct imx_usbmisc_data *data);
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 322e4de6b24a..6d8331e7da99 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -128,6 +128,12 @@
#define MX7D_USB_OTG_PHY_STATUS_VBUS_VLD BIT(3)
#define MX7D_USB_OTG_PHY_STATUS_CHRGDET BIT(29)
+#define MX7D_USB_OTG_PHY_CFG1 0x30
+#define TXPREEMPAMPTUNE0_BIT 28
+#define TXPREEMPAMPTUNE0_MASK (3 << 28)
+#define TXVREFTUNE0_BIT 20
+#define TXVREFTUNE0_MASK (0xf << 20)
+
#define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \
MX6_BM_ID_WAKEUP)
@@ -649,6 +655,21 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID
| MX7D_USBNC_AUTO_RESUME,
usbmisc->base + MX7D_USBNC_USB_CTRL2);
+ /* PHY tuning for signal quality */
+ reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
+ if (data->emp_curr_control && data->emp_curr_control <=
+ (TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) {
+ reg &= ~TXPREEMPAMPTUNE0_MASK;
+ reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT);
+ }
+
+ if (data->dc_vol_level_adjust && data->dc_vol_level_adjust <=
+ (TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) {
+ reg &= ~TXVREFTUNE0_MASK;
+ reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT);
+ }
+
+ writel(reg, usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
}
spin_unlock_irqrestore(&usbmisc->lock, flags);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 7f6f3ab5b8a6..30ef946a8e1a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -173,7 +173,7 @@ static int acm_wb_alloc(struct acm *acm)
for (;;) {
wb = &acm->wb[wbn];
if (!wb->use) {
- wb->use = 1;
+ wb->use = true;
wb->len = 0;
return wbn;
}
@@ -191,7 +191,8 @@ static int acm_wb_is_avail(struct acm *acm)
n = ACM_NW;
spin_lock_irqsave(&acm->write_lock, flags);
for (i = 0; i < ACM_NW; i++)
- n -= acm->wb[i].use;
+ if(acm->wb[i].use)
+ n--;
spin_unlock_irqrestore(&acm->write_lock, flags);
return n;
}
@@ -201,7 +202,7 @@ static int acm_wb_is_avail(struct acm *acm)
*/
static void acm_write_done(struct acm *acm, struct acm_wb *wb)
{
- wb->use = 0;
+ wb->use = false;
acm->transmitting--;
usb_autopm_put_interface_async(acm->control);
}
@@ -741,7 +742,7 @@ static void acm_port_shutdown(struct tty_port *port)
if (!urb)
break;
wb = urb->context;
- wb->use = 0;
+ wb->use = false;
usb_autopm_put_interface_async(acm->control);
}
@@ -792,7 +793,7 @@ static int acm_tty_write(struct tty_struct *tty,
wb = &acm->wb[wbn];
if (!acm->dev) {
- wb->use = 0;
+ wb->use = false;
spin_unlock_irqrestore(&acm->write_lock, flags);
return -ENODEV;
}
@@ -804,7 +805,7 @@ static int acm_tty_write(struct tty_struct *tty,
stat = usb_autopm_get_interface_async(acm->control);
if (stat) {
- wb->use = 0;
+ wb->use = false;
spin_unlock_irqrestore(&acm->write_lock, flags);
return stat;
}
@@ -1196,9 +1197,6 @@ static int acm_probe(struct usb_interface *intf,
return -EINVAL;
}
- if (!intf->cur_altsetting)
- return -EINVAL;
-
if (!buflen) {
if (intf->cur_altsetting->endpoint &&
intf->cur_altsetting->endpoint->extralen &&
@@ -1221,39 +1219,42 @@ static int acm_probe(struct usb_interface *intf,
call_intf_num = cmgmd->bDataInterface;
if (!union_header) {
- if (call_intf_num > 0) {
+ if (intf->cur_altsetting->desc.bNumEndpoints == 3) {
+ dev_dbg(&intf->dev, "No union descriptor, assuming single interface\n");
+ combined_interfaces = 1;
+ control_interface = data_interface = intf;
+ goto look_for_collapsed_interface;
+ } else if (call_intf_num > 0) {
dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n");
- /* quirks for Droids MuIn LCD */
- if (quirks & NO_DATA_INTERFACE) {
- data_interface = usb_ifnum_to_if(usb_dev, 0);
- } else {
- data_intf_num = call_intf_num;
- data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
- }
+ data_intf_num = call_intf_num;
+ data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
control_interface = intf;
} else {
- if (intf->cur_altsetting->desc.bNumEndpoints != 3) {
- dev_dbg(&intf->dev,"No union descriptor, giving up\n");
- return -ENODEV;
- } else {
- dev_warn(&intf->dev,"No union descriptor, testing for castrated device\n");
- combined_interfaces = 1;
- control_interface = data_interface = intf;
- goto look_for_collapsed_interface;
- }
+ dev_dbg(&intf->dev, "No union descriptor, giving up\n");
+ return -ENODEV;
}
} else {
+ int class = -1;
+
data_intf_num = union_header->bSlaveInterface0;
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, data_intf_num);
+
+ if (control_interface)
+ class = control_interface->cur_altsetting->desc.bInterfaceClass;
+
+ if (class != USB_CLASS_COMM && class != USB_CLASS_CDC_DATA) {
+ dev_dbg(&intf->dev, "Broken union descriptor, assuming single interface\n");
+ combined_interfaces = 1;
+ control_interface = data_interface = intf;
+ goto look_for_collapsed_interface;
+ }
}
if (!control_interface || !data_interface) {
dev_dbg(&intf->dev, "no interfaces\n");
return -ENODEV;
}
- if (!data_interface->cur_altsetting || !control_interface->cur_altsetting)
- return -ENODEV;
if (data_intf_num != call_intf_num)
dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n");
@@ -1280,10 +1281,8 @@ look_for_collapsed_interface:
skip_normal_probe:
/*workaround for switched interfaces */
- if (data_interface->cur_altsetting->desc.bInterfaceClass
- != CDC_DATA_INTERFACE_TYPE) {
- if (control_interface->cur_altsetting->desc.bInterfaceClass
- == CDC_DATA_INTERFACE_TYPE) {
+ if (data_interface->cur_altsetting->desc.bInterfaceClass != USB_CLASS_CDC_DATA) {
+ if (control_interface->cur_altsetting->desc.bInterfaceClass == USB_CLASS_CDC_DATA) {
dev_dbg(&intf->dev,
"Your device has switched interfaces.\n");
swap(control_interface, data_interface);
@@ -1876,11 +1875,6 @@ static const struct usb_device_id acm_ids[] = {
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
- /* Support for Droids MuIn LCD */
- { USB_DEVICE(0x04d8, 0x000b),
- .driver_info = NO_DATA_INTERFACE,
- },
-
#if IS_ENABLED(CONFIG_INPUT_IMS_PCU)
{ USB_DEVICE(0x04d8, 0x0082), /* Application mode */
.driver_info = IGNORE_DEVICE,
@@ -1906,6 +1900,17 @@ static const struct usb_device_id acm_ids[] = {
.driver_info = IGNORE_DEVICE,
},
+ /* Exclude ETAS ES58x */
+ { USB_DEVICE(0x108c, 0x0159), /* ES581.4 */
+ .driver_info = IGNORE_DEVICE,
+ },
+ { USB_DEVICE(0x108c, 0x0168), /* ES582.1 */
+ .driver_info = IGNORE_DEVICE,
+ },
+ { USB_DEVICE(0x108c, 0x0169), /* ES584.1 */
+ .driver_info = IGNORE_DEVICE,
+ },
+
{ USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */
.driver_info = SEND_ZERO_PACKET,
},
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index cd5e9d8ab237..9dce179d031b 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -64,12 +64,12 @@
#define ACM_NR 16
struct acm_wb {
- unsigned char *buf;
+ u8 *buf;
dma_addr_t dmah;
- int len;
- int use;
+ unsigned int len;
struct urb *urb;
struct acm *instance;
+ bool use;
};
struct acm_rb {
@@ -131,15 +131,12 @@ struct acm {
unsigned long quirks;
};
-#define CDC_DATA_INTERFACE_TYPE 0x0a
-
/* constants describing various quirks and errors */
#define NO_UNION_NORMAL BIT(0)
#define SINGLE_RX_URB BIT(1)
#define NO_CAP_LINE BIT(2)
-#define NO_DATA_INTERFACE BIT(4)
-#define IGNORE_DEVICE BIT(5)
-#define QUIRK_CONTROL_LINE_STATE BIT(6)
-#define CLEAR_HALT_CONDITIONS BIT(7)
-#define SEND_ZERO_PACKET BIT(8)
-#define DISABLE_ECHO BIT(9)
+#define IGNORE_DEVICE BIT(3)
+#define QUIRK_CONTROL_LINE_STATE BIT(4)
+#define CLEAR_HALT_CONDITIONS BIT(5)
+#define SEND_ZERO_PACKET BIT(6)
+#define DISABLE_ECHO BIT(7)
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 7f5de956a2fc..02d0cfd23bb2 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -58,6 +58,9 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
#define WDM_MAX 16
+/* we cannot wait forever at flush() */
+#define WDM_FLUSH_TIMEOUT (30 * HZ)
+
/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */
#define WDM_DEFAULT_BUFSIZE 256
@@ -151,7 +154,7 @@ static void wdm_out_callback(struct urb *urb)
kfree(desc->outbuf);
desc->outbuf = NULL;
clear_bit(WDM_IN_USE, &desc->flags);
- wake_up(&desc->wait);
+ wake_up_all(&desc->wait);
}
static void wdm_in_callback(struct urb *urb)
@@ -393,6 +396,9 @@ static ssize_t wdm_write
if (test_bit(WDM_RESETTING, &desc->flags))
r = -EIO;
+ if (test_bit(WDM_DISCONNECTING, &desc->flags))
+ r = -ENODEV;
+
if (r < 0) {
rv = r;
goto out_free_mem_pm;
@@ -424,6 +430,7 @@ static ssize_t wdm_write
if (rv < 0) {
desc->outbuf = NULL;
clear_bit(WDM_IN_USE, &desc->flags);
+ wake_up_all(&desc->wait); /* for wdm_wait_for_response() */
dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
rv = usb_translate_errors(rv);
goto out_free_mem_pm;
@@ -583,28 +590,58 @@ err:
return rv;
}
-static int wdm_flush(struct file *file, fl_owner_t id)
+static int wdm_wait_for_response(struct file *file, long timeout)
{
struct wdm_device *desc = file->private_data;
+ long rv; /* Use long here because (int) MAX_SCHEDULE_TIMEOUT < 0. */
+
+ /*
+ * Needs both flags. We cannot do with one because resetting it would
+ * cause a race with write() yet we need to signal a disconnect.
+ */
+ rv = wait_event_interruptible_timeout(desc->wait,
+ !test_bit(WDM_IN_USE, &desc->flags) ||
+ test_bit(WDM_DISCONNECTING, &desc->flags),
+ timeout);
- wait_event(desc->wait,
- /*
- * needs both flags. We cannot do with one
- * because resetting it would cause a race
- * with write() yet we need to signal
- * a disconnect
- */
- !test_bit(WDM_IN_USE, &desc->flags) ||
- test_bit(WDM_DISCONNECTING, &desc->flags));
-
- /* cannot dereference desc->intf if WDM_DISCONNECTING */
+ /*
+ * To report the correct error. This is best effort.
+ * We are inevitably racing with the hardware.
+ */
if (test_bit(WDM_DISCONNECTING, &desc->flags))
return -ENODEV;
- if (desc->werr < 0)
- dev_err(&desc->intf->dev, "Error in flush path: %d\n",
- desc->werr);
+ if (!rv)
+ return -EIO;
+ if (rv < 0)
+ return -EINTR;
+
+ spin_lock_irq(&desc->iuspin);
+ rv = desc->werr;
+ desc->werr = 0;
+ spin_unlock_irq(&desc->iuspin);
+
+ return usb_translate_errors(rv);
+
+}
+
+/*
+ * You need to send a signal when you react to malicious or defective hardware.
+ * Also, don't abort when fsync() returned -EINVAL, for older kernels which do
+ * not implement wdm_flush() will return -EINVAL.
+ */
+static int wdm_fsync(struct file *file, loff_t start, loff_t end, int datasync)
+{
+ return wdm_wait_for_response(file, MAX_SCHEDULE_TIMEOUT);
+}
- return usb_translate_errors(desc->werr);
+/*
+ * Same with wdm_fsync(), except it uses finite timeout in order to react to
+ * malicious or defective hardware which ceased communication after close() was
+ * implicitly called due to process termination.
+ */
+static int wdm_flush(struct file *file, fl_owner_t id)
+{
+ return wdm_wait_for_response(file, WDM_FLUSH_TIMEOUT);
}
static __poll_t wdm_poll(struct file *file, struct poll_table_struct *wait)
@@ -729,6 +766,7 @@ static const struct file_operations wdm_fops = {
.owner = THIS_MODULE,
.read = wdm_read,
.write = wdm_write,
+ .fsync = wdm_fsync,
.open = wdm_open,
.flush = wdm_flush,
.release = wdm_release,
diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c
index 7b3a21360d7c..6c4e3a19f42c 100644
--- a/drivers/usb/common/usb-conn-gpio.c
+++ b/drivers/usb/common/usb-conn-gpio.c
@@ -91,14 +91,14 @@ static void usb_conn_detect_cable(struct work_struct *work)
return;
}
- if (info->last_role == USB_ROLE_HOST)
+ if (info->last_role == USB_ROLE_HOST && info->vbus)
regulator_disable(info->vbus);
ret = usb_role_switch_set_role(info->role_sw, role);
if (ret)
dev_err(info->dev, "failed to set role: %d\n", ret);
- if (role == USB_ROLE_HOST) {
+ if (role == USB_ROLE_HOST && info->vbus) {
ret = regulator_enable(info->vbus);
if (ret)
dev_err(info->dev, "enable vbus regulator failed\n");
@@ -106,8 +106,9 @@ static void usb_conn_detect_cable(struct work_struct *work)
info->last_role = role;
- dev_dbg(info->dev, "vbus regulator is %s\n",
- regulator_is_enabled(info->vbus) ? "enabled" : "disabled");
+ if (info->vbus)
+ dev_dbg(info->dev, "vbus regulator is %s\n",
+ regulator_is_enabled(info->vbus) ? "enabled" : "disabled");
power_supply_changed(info->charger);
}
@@ -156,6 +157,7 @@ static int usb_conn_probe(struct platform_device *pdev)
struct power_supply_config cfg = {
.of_node = dev->of_node,
};
+ bool need_vbus = true;
int ret = 0;
info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
@@ -185,10 +187,26 @@ static int usb_conn_probe(struct platform_device *pdev)
INIT_DELAYED_WORK(&info->dw_det, usb_conn_detect_cable);
- info->vbus = devm_regulator_get(dev, "vbus");
+ /*
+ * If the USB connector is a child of a USB port and that port already provides the VBUS
+ * supply, there's no need for the USB connector to provide it again.
+ */
+ if (dev->parent && dev->parent->of_node) {
+ if (of_find_property(dev->parent->of_node, "vbus-supply", NULL))
+ need_vbus = false;
+ }
+
+ if (!need_vbus) {
+ info->vbus = devm_regulator_get_optional(dev, "vbus");
+ if (PTR_ERR(info->vbus) == -ENODEV)
+ info->vbus = NULL;
+ } else {
+ info->vbus = devm_regulator_get(dev, "vbus");
+ }
+
if (IS_ERR(info->vbus)) {
if (PTR_ERR(info->vbus) != -EPROBE_DEFER)
- dev_err(dev, "failed to get vbus\n");
+ dev_err(dev, "failed to get vbus: %ld\n", PTR_ERR(info->vbus));
return PTR_ERR(info->vbus);
}
@@ -266,7 +284,7 @@ static int usb_conn_remove(struct platform_device *pdev)
cancel_delayed_work_sync(&info->dw_det);
- if (info->last_role == USB_ROLE_HOST)
+ if (info->last_role == USB_ROLE_HOST && info->vbus)
regulator_disable(info->vbus);
usb_role_switch_put(info->role_sw);
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index dfacc478a8fc..351ede4b5de2 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -32,6 +32,20 @@ config USB_DEFAULT_PERSIST
If you have any questions about this, say Y here, only say N
if you know exactly what you are doing.
+config USB_FEW_INIT_RETRIES
+ bool "Limit USB device initialization to only a few retries"
+ help
+ When a new USB device is detected, the kernel tries very hard
+ to initialize and enumerate it, with lots of nested retry loops.
+ This almost always works, but when it fails it can take a long time.
+ This option tells the kernel to make only a few retry attempts,
+ so that the total time required for a failed initialization is
+ no more than 30 seconds (as required by the USB OTG spec).
+
+ Say N here unless you require new-device enumeration failure to
+ occur within 30 seconds (as might be needed in an embedded
+ application).
+
config USB_DYNAMIC_MINORS
bool "Dynamic USB minor allocation"
help
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 696b2b692b83..1ef2de6e375a 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -39,7 +39,6 @@
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/gfp.h>
-#include <linux/poll.h>
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
#include <linux/usb/hcd.h>
@@ -97,22 +96,6 @@ static const char format_endpt[] =
/* E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */
"E: Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%d%cs\n";
-/*
- * Wait for an connect/disconnect event to happen. We initialize
- * the event counter with an odd number, and each event will increment
- * the event counter by two, so it will always _stay_ odd. That means
- * that it will never be zero, so "event 0" will never match a current
- * event, and thus 'poll' will always trigger as readable for the first
- * time it gets called.
- */
-static struct device_connect_event {
- atomic_t count;
- wait_queue_head_t wait;
-} device_event = {
- .count = ATOMIC_INIT(1),
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER(device_event.wait)
-};
-
struct class_info {
int class;
char *class_name;
@@ -146,12 +129,6 @@ static const struct class_info clas_info[] = {
/*****************************************************************/
-void usbfs_conn_disc_event(void)
-{
- atomic_add(2, &device_event.count);
- wake_up(&device_event.wait);
-}
-
static const char *class_decode(const int class)
{
int ix;
@@ -623,25 +600,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf,
return total_written;
}
-/* Kernel lock for "lastev" protection */
-static __poll_t usb_device_poll(struct file *file,
- struct poll_table_struct *wait)
-{
- unsigned int event_count;
-
- poll_wait(file, &device_event.wait, wait);
-
- event_count = atomic_read(&device_event.count);
- if (file->f_version != event_count) {
- file->f_version = event_count;
- return EPOLLIN | EPOLLRDNORM;
- }
-
- return 0;
-}
-
const struct file_operations usbfs_devices_fops = {
.llseek = no_seek_end_llseek,
.read = usb_device_read,
- .poll = usb_device_poll,
};
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index b351962279e4..98b7449c11f3 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -991,8 +991,7 @@ int usb_register_device_driver(struct usb_device_driver *new_udriver,
bus_for_each_dev(&usb_bus_type, NULL, new_udriver,
__usb_bus_reprobe_drivers);
} else {
- printk(KERN_ERR "%s: error %d registering device "
- " driver %s\n",
+ pr_err("%s: error %d registering device driver %s\n",
usbcore_name, retval, new_udriver->name);
}
@@ -1068,9 +1067,8 @@ out:
out_newid:
driver_unregister(&new_driver->drvwrap.driver);
- printk(KERN_ERR "%s: error %d registering interface "
- " driver %s\n",
- usbcore_name, retval, new_driver->name);
+ pr_err("%s: error %d registering interface driver %s\n",
+ usbcore_name, retval, new_driver->name);
goto out;
}
EXPORT_SYMBOL_GPL(usb_register_driver);
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index 2b2f1ab6e36a..22c887f5c497 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -195,7 +195,7 @@ int usb_choose_configuration(struct usb_device *udev)
}
EXPORT_SYMBOL_GPL(usb_choose_configuration);
-static int __check_usb_generic(struct device_driver *drv, void *data)
+static int __check_for_non_generic_match(struct device_driver *drv, void *data)
{
struct usb_device *udev = data;
struct usb_device_driver *udrv;
@@ -219,7 +219,7 @@ static bool usb_generic_driver_match(struct usb_device *udev)
* If any other driver wants the device, leave the device to this other
* driver.
*/
- if (bus_for_each_drv(&usb_bus_type, NULL, udev, __check_usb_generic))
+ if (bus_for_each_drv(&usb_bus_type, NULL, udev, __check_for_non_generic_match))
return false;
return true;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index a33b849e8beb..2c6b9578a7d3 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1657,9 +1657,9 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
usb_put_urb(urb);
}
-static void usb_giveback_urb_bh(unsigned long param)
+static void usb_giveback_urb_bh(struct tasklet_struct *t)
{
- struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param;
+ struct giveback_urb_bh *bh = from_tasklet(bh, t, bh);
struct list_head local_list;
spin_lock_irq(&bh->lock);
@@ -2403,7 +2403,7 @@ static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
spin_lock_init(&bh->lock);
INIT_LIST_HEAD(&bh->head);
- tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh);
+ tasklet_setup(&bh->bh, usb_giveback_urb_bh);
}
struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 5b768b80d1ee..17202b2ee063 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2705,11 +2705,20 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
}
+#ifdef CONFIG_USB_FEW_INIT_RETRIES
+#define PORT_RESET_TRIES 2
+#define SET_ADDRESS_TRIES 1
+#define GET_DESCRIPTOR_TRIES 1
+#define GET_MAXPACKET0_TRIES 1
+#define PORT_INIT_TRIES 4
+
+#else
#define PORT_RESET_TRIES 5
#define SET_ADDRESS_TRIES 2
#define GET_DESCRIPTOR_TRIES 2
-#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1))
-#define USE_NEW_SCHEME(i, scheme) ((i) / 2 == (int)(scheme))
+#define GET_MAXPACKET0_TRIES 3
+#define PORT_INIT_TRIES 4
+#endif /* CONFIG_USB_FEW_INIT_RETRIES */
#define HUB_ROOT_RESET_TIME 60 /* times are in msec */
#define HUB_SHORT_RESET_TIME 10
@@ -2717,23 +2726,31 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
#define HUB_LONG_RESET_TIME 200
#define HUB_RESET_TIMEOUT 800
-/*
- * "New scheme" enumeration causes an extra state transition to be
- * exposed to an xhci host and causes USB3 devices to receive control
- * commands in the default state. This has been seen to cause
- * enumeration failures, so disable this enumeration scheme for USB3
- * devices.
- */
static bool use_new_scheme(struct usb_device *udev, int retry,
struct usb_port *port_dev)
{
int old_scheme_first_port =
- port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME;
+ (port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME) ||
+ old_scheme_first;
+ /*
+ * "New scheme" enumeration causes an extra state transition to be
+ * exposed to an xhci host and causes USB3 devices to receive control
+ * commands in the default state. This has been seen to cause
+ * enumeration failures, so disable this enumeration scheme for USB3
+ * devices.
+ */
if (udev->speed >= USB_SPEED_SUPER)
return false;
- return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first);
+ /*
+ * If use_both_schemes is set, use the first scheme (whichever
+ * it is) for the larger half of the retries, then use the other
+ * scheme. Otherwise, use the first scheme for all the retries.
+ */
+ if (use_both_schemes && retry >= (PORT_INIT_TRIES + 1) / 2)
+ return old_scheme_first_port; /* Second half */
+ return !old_scheme_first_port; /* First half or all */
}
/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
@@ -4545,6 +4562,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
const char *speed;
int devnum = udev->devnum;
const char *driver_name;
+ bool do_new_scheme;
/* root hub ports have a slightly longer reset period
* (from USB 2.0 spec, section 7.1.7.5)
@@ -4657,14 +4675,13 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
* first 8 bytes of the device descriptor to get the ep0 maxpacket
* value.
*/
- for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) {
- bool did_new_scheme = false;
+ do_new_scheme = use_new_scheme(udev, retry_counter, port_dev);
- if (use_new_scheme(udev, retry_counter, port_dev)) {
+ for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) {
+ if (do_new_scheme) {
struct usb_device_descriptor *buf;
int r = 0;
- did_new_scheme = true;
retval = hub_enable_device(udev);
if (retval < 0) {
dev_err(&udev->dev,
@@ -4684,7 +4701,8 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
* 255 is for WUSB devices, we actually need to use
* 512 (WUSB1.0[4.8.1]).
*/
- for (operations = 0; operations < 3; ++operations) {
+ for (operations = 0; operations < GET_MAXPACKET0_TRIES;
+ ++operations) {
buf->bMaxPacketSize0 = 0;
r = usb_control_msg(udev, usb_rcvaddr0pipe(),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
@@ -4773,11 +4791,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
* - read ep0 maxpacket even for high and low speed,
*/
msleep(10);
- /* use_new_scheme() checks the speed which may have
- * changed since the initial look so we cache the result
- * in did_new_scheme
- */
- if (did_new_scheme)
+ if (do_new_scheme)
break;
}
@@ -5106,7 +5120,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
unit_load = 100;
status = 0;
- for (i = 0; i < SET_CONFIG_TRIES; i++) {
+ for (i = 0; i < PORT_INIT_TRIES; i++) {
/* reallocate for each attempt, since references
* to the previous one can escape in various ways
@@ -5239,7 +5253,7 @@ loop:
break;
/* When halfway through our retry count, power-cycle the port */
- if (i == (SET_CONFIG_TRIES / 2) - 1) {
+ if (i == (PORT_INIT_TRIES - 1) / 2) {
dev_info(&port_dev->dev, "attempt power cycle\n");
usb_hub_set_port_power(hdev, hub, port1, false);
msleep(2 * hub_power_on_good_delay(hub));
@@ -5770,7 +5784,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
bos = udev->bos;
udev->bos = NULL;
- for (i = 0; i < SET_CONFIG_TRIES; ++i) {
+ for (i = 0; i < PORT_INIT_TRIES; ++i) {
/* ep0 maxpacket size may change; let the HCD know about it.
* Other endpoints will be handled by re-enumeration. */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index ae1de9cc4b09..f4107b9e8c38 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -163,6 +163,143 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
EXPORT_SYMBOL_GPL(usb_control_msg);
/**
+ * usb_control_msg_send - Builds a control "send" message, sends it off and waits for completion
+ * @dev: pointer to the usb device to send the message to
+ * @endpoint: endpoint to send the message to
+ * @request: USB message request value
+ * @requesttype: USB message request type value
+ * @value: USB message value
+ * @index: USB message index value
+ * @driver_data: pointer to the data to send
+ * @size: length in bytes of the data to send
+ * @timeout: time in msecs to wait for the message to complete before timing
+ * out (if 0 the wait is forever)
+ * @memflags: the flags for memory allocation for buffers
+ *
+ * Context: !in_interrupt ()
+ *
+ * This function sends a control message to a specified endpoint that is not
+ * expected to fill in a response (i.e. a "send message") and waits for the
+ * message to complete, or timeout.
+ *
+ * Do not use this function from within an interrupt context. If you need
+ * an asynchronous message, or need to send a message from within interrupt
+ * context, use usb_submit_urb(). If a thread in your driver uses this call,
+ * make sure your disconnect() method can wait for it to complete. Since you
+ * don't have a handle on the URB used, you can't cancel the request.
+ *
+ * The data pointer can be made to a reference on the stack, or anywhere else,
+ * as it will not be modified at all. This does not have the restriction that
+ * usb_control_msg() has where the data pointer must be to dynamically allocated
+ * memory (i.e. memory that can be successfully DMAed to a device).
+ *
+ * Return: If successful, 0 is returned, Otherwise, a negative error number.
+ */
+int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request,
+ __u8 requesttype, __u16 value, __u16 index,
+ const void *driver_data, __u16 size, int timeout,
+ gfp_t memflags)
+{
+ unsigned int pipe = usb_sndctrlpipe(dev, endpoint);
+ int ret;
+ u8 *data = NULL;
+
+ if (usb_pipe_type_check(dev, pipe))
+ return -EINVAL;
+
+ if (size) {
+ data = kmemdup(driver_data, size, memflags);
+ if (!data)
+ return -ENOMEM;
+ }
+
+ ret = usb_control_msg(dev, pipe, request, requesttype, value, index,
+ data, size, timeout);
+ kfree(data);
+
+ if (ret < 0)
+ return ret;
+ if (ret == size)
+ return 0;
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(usb_control_msg_send);
+
+/**
+ * usb_control_msg_recv - Builds a control "receive" message, sends it off and waits for completion
+ * @dev: pointer to the usb device to send the message to
+ * @endpoint: endpoint to send the message to
+ * @request: USB message request value
+ * @requesttype: USB message request type value
+ * @value: USB message value
+ * @index: USB message index value
+ * @driver_data: pointer to the data to be filled in by the message
+ * @size: length in bytes of the data to be received
+ * @timeout: time in msecs to wait for the message to complete before timing
+ * out (if 0 the wait is forever)
+ * @memflags: the flags for memory allocation for buffers
+ *
+ * Context: !in_interrupt ()
+ *
+ * This function sends a control message to a specified endpoint that is
+ * expected to fill in a response (i.e. a "receive message") and waits for the
+ * message to complete, or timeout.
+ *
+ * Do not use this function from within an interrupt context. If you need
+ * an asynchronous message, or need to send a message from within interrupt
+ * context, use usb_submit_urb(). If a thread in your driver uses this call,
+ * make sure your disconnect() method can wait for it to complete. Since you
+ * don't have a handle on the URB used, you can't cancel the request.
+ *
+ * The data pointer can be made to a reference on the stack, or anywhere else
+ * that can be successfully written to. This function does not have the
+ * restriction that usb_control_msg() has where the data pointer must be to
+ * dynamically allocated memory (i.e. memory that can be successfully DMAed to a
+ * device).
+ *
+ * The "whole" message must be properly received from the device in order for
+ * this function to be successful. If a device returns less than the expected
+ * amount of data, then the function will fail. Do not use this for messages
+ * where a variable amount of data might be returned.
+ *
+ * Return: If successful, 0 is returned, Otherwise, a negative error number.
+ */
+int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request,
+ __u8 requesttype, __u16 value, __u16 index,
+ void *driver_data, __u16 size, int timeout,
+ gfp_t memflags)
+{
+ unsigned int pipe = usb_rcvctrlpipe(dev, endpoint);
+ int ret;
+ u8 *data;
+
+ if (!size || !driver_data || usb_pipe_type_check(dev, pipe))
+ return -EINVAL;
+
+ data = kmalloc(size, memflags);
+ if (!data)
+ return -ENOMEM;
+
+ ret = usb_control_msg(dev, pipe, request, requesttype, value, index,
+ data, size, timeout);
+
+ if (ret < 0)
+ goto exit;
+
+ if (ret == size) {
+ memcpy(driver_data, data, size);
+ ret = 0;
+ } else {
+ ret = -EINVAL;
+ }
+
+exit:
+ kfree(data);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(usb_control_msg_recv);
+
+/**
* usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion
* @usb_dev: pointer to the usb device to send the message to
* @pipe: endpoint "pipe" to send the message to
@@ -948,11 +1085,12 @@ int usb_set_isoch_delay(struct usb_device *dev)
if (dev->speed < USB_SPEED_SUPER)
return 0;
- return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ return usb_control_msg_send(dev, 0,
USB_REQ_SET_ISOCH_DELAY,
USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
dev->hub_delay, 0, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
+ USB_CTRL_SET_TIMEOUT,
+ GFP_NOIO);
}
/**
@@ -1070,13 +1208,13 @@ int usb_clear_halt(struct usb_device *dev, int pipe)
* (like some ibmcam model 1 units) seem to expect hosts to make
* this request for iso endpoints, which can't halt!
*/
- result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
- USB_ENDPOINT_HALT, endp, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
+ result = usb_control_msg_send(dev, 0,
+ USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
+ USB_ENDPOINT_HALT, endp, NULL, 0,
+ USB_CTRL_SET_TIMEOUT, GFP_NOIO);
/* don't un-halt or force to DATA0 except on success */
- if (result < 0)
+ if (result)
return result;
/* NOTE: seems like Microsoft and Apple don't bother verifying
@@ -1438,9 +1576,11 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
if (dev->quirks & USB_QUIRK_NO_SET_INTF)
ret = -EPIPE;
else
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE,
- alternate, interface, NULL, 0, 5000);
+ ret = usb_control_msg_send(dev, 0,
+ USB_REQ_SET_INTERFACE,
+ USB_RECIP_INTERFACE, alternate,
+ interface, NULL, 0, 5000,
+ GFP_NOIO);
/* 9.4.10 says devices don't need this and are free to STALL the
* request if the interface only has one alternate setting.
@@ -1450,7 +1590,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
"manual set_interface for iface %d, alt %d\n",
interface, alternate);
manual = 1;
- } else if (ret < 0) {
+ } else if (ret) {
/* Re-instate the old alt setting */
usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting);
usb_enable_lpm(dev);
@@ -1574,11 +1714,11 @@ int usb_reset_configuration(struct usb_device *dev)
mutex_unlock(hcd->bandwidth_mutex);
return retval;
}
- retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- USB_REQ_SET_CONFIGURATION, 0,
- config->desc.bConfigurationValue, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (retval < 0) {
+ retval = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0,
+ config->desc.bConfigurationValue, 0,
+ NULL, 0, USB_CTRL_SET_TIMEOUT,
+ GFP_NOIO);
+ if (retval) {
usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
usb_enable_lpm(dev);
mutex_unlock(hcd->bandwidth_mutex);
@@ -1963,10 +2103,10 @@ free_interfaces:
}
kfree(new_interfaces);
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (ret < 0 && cp) {
+ ret = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0,
+ configuration, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT, GFP_NOIO);
+ if (ret && cp) {
/*
* All the old state is gone, so what else can we do?
* The device is probably useless now anyway.
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 7bc23469f4e4..357b149b20d3 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -192,24 +192,39 @@ static const int pipetypes[4] = {
};
/**
- * usb_urb_ep_type_check - sanity check of endpoint in the given urb
- * @urb: urb to be checked
+ * usb_pipe_type_check - sanity check of a specific pipe for a usb device
+ * @dev: struct usb_device to be checked
+ * @pipe: pipe to check
*
* This performs a light-weight sanity check for the endpoint in the
- * given urb. It returns 0 if the urb contains a valid endpoint, otherwise
- * a negative error code.
+ * given usb device. It returns 0 if the pipe is valid for the specific usb
+ * device, otherwise a negative error code.
*/
-int usb_urb_ep_type_check(const struct urb *urb)
+int usb_pipe_type_check(struct usb_device *dev, unsigned int pipe)
{
const struct usb_host_endpoint *ep;
- ep = usb_pipe_endpoint(urb->dev, urb->pipe);
+ ep = usb_pipe_endpoint(dev, pipe);
if (!ep)
return -EINVAL;
- if (usb_pipetype(urb->pipe) != pipetypes[usb_endpoint_type(&ep->desc)])
+ if (usb_pipetype(pipe) != pipetypes[usb_endpoint_type(&ep->desc)])
return -EINVAL;
return 0;
}
+EXPORT_SYMBOL_GPL(usb_pipe_type_check);
+
+/**
+ * usb_urb_ep_type_check - sanity check of endpoint in the given urb
+ * @urb: urb to be checked
+ *
+ * This performs a light-weight sanity check for the endpoint in the
+ * given urb. It returns 0 if the urb contains a valid endpoint, otherwise
+ * a negative error code.
+ */
+int usb_urb_ep_type_check(const struct urb *urb)
+{
+ return usb_pipe_type_check(urb->dev, urb->pipe);
+}
EXPORT_SYMBOL_GPL(usb_urb_ep_type_check);
/**
@@ -474,7 +489,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
*/
/* Check that the pipe's type matches the endpoint's type */
- if (usb_urb_ep_type_check(urb))
+ if (usb_pipe_type_check(urb->dev, urb->pipe))
dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
usb_pipetype(urb->pipe), pipetypes[xfertype]);
@@ -772,11 +787,12 @@ void usb_block_urb(struct urb *urb)
EXPORT_SYMBOL_GPL(usb_block_urb);
/**
- * usb_kill_anchored_urbs - cancel transfer requests en masse
+ * usb_kill_anchored_urbs - kill all URBs associated with an anchor
* @anchor: anchor the requests are bound to
*
- * this allows all outstanding URBs to be killed starting
- * from the back of the queue
+ * This kills all outstanding URBs starting from the back of the queue,
+ * with guarantee that no completer callbacks will take place from the
+ * anchor after this function returns.
*
* This routine should not be called by a driver after its disconnect
* method has returned.
@@ -784,20 +800,26 @@ EXPORT_SYMBOL_GPL(usb_block_urb);
void usb_kill_anchored_urbs(struct usb_anchor *anchor)
{
struct urb *victim;
+ int surely_empty;
- spin_lock_irq(&anchor->lock);
- while (!list_empty(&anchor->urb_list)) {
- victim = list_entry(anchor->urb_list.prev, struct urb,
- anchor_list);
- /* we must make sure the URB isn't freed before we kill it*/
- usb_get_urb(victim);
- spin_unlock_irq(&anchor->lock);
- /* this will unanchor the URB */
- usb_kill_urb(victim);
- usb_put_urb(victim);
+ do {
spin_lock_irq(&anchor->lock);
- }
- spin_unlock_irq(&anchor->lock);
+ while (!list_empty(&anchor->urb_list)) {
+ victim = list_entry(anchor->urb_list.prev,
+ struct urb, anchor_list);
+ /* make sure the URB isn't freed before we kill it */
+ usb_get_urb(victim);
+ spin_unlock_irq(&anchor->lock);
+ /* this will unanchor the URB */
+ usb_kill_urb(victim);
+ usb_put_urb(victim);
+ spin_lock_irq(&anchor->lock);
+ }
+ surely_empty = usb_anchor_check_wakeup(anchor);
+
+ spin_unlock_irq(&anchor->lock);
+ cpu_relax();
+ } while (!surely_empty);
}
EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
@@ -816,21 +838,27 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
void usb_poison_anchored_urbs(struct usb_anchor *anchor)
{
struct urb *victim;
+ int surely_empty;
- spin_lock_irq(&anchor->lock);
- anchor->poisoned = 1;
- while (!list_empty(&anchor->urb_list)) {
- victim = list_entry(anchor->urb_list.prev, struct urb,
- anchor_list);
- /* we must make sure the URB isn't freed before we kill it*/
- usb_get_urb(victim);
- spin_unlock_irq(&anchor->lock);
- /* this will unanchor the URB */
- usb_poison_urb(victim);
- usb_put_urb(victim);
+ do {
spin_lock_irq(&anchor->lock);
- }
- spin_unlock_irq(&anchor->lock);
+ anchor->poisoned = 1;
+ while (!list_empty(&anchor->urb_list)) {
+ victim = list_entry(anchor->urb_list.prev,
+ struct urb, anchor_list);
+ /* make sure the URB isn't freed before we kill it */
+ usb_get_urb(victim);
+ spin_unlock_irq(&anchor->lock);
+ /* this will unanchor the URB */
+ usb_poison_urb(victim);
+ usb_put_urb(victim);
+ spin_lock_irq(&anchor->lock);
+ }
+ surely_empty = usb_anchor_check_wakeup(anchor);
+
+ spin_unlock_irq(&anchor->lock);
+ cpu_relax();
+ } while (!surely_empty);
}
EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);
@@ -970,14 +998,20 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor)
{
struct urb *victim;
unsigned long flags;
+ int surely_empty;
+
+ do {
+ spin_lock_irqsave(&anchor->lock, flags);
+ while (!list_empty(&anchor->urb_list)) {
+ victim = list_entry(anchor->urb_list.prev,
+ struct urb, anchor_list);
+ __usb_unanchor_urb(victim, anchor);
+ }
+ surely_empty = usb_anchor_check_wakeup(anchor);
- spin_lock_irqsave(&anchor->lock, flags);
- while (!list_empty(&anchor->urb_list)) {
- victim = list_entry(anchor->urb_list.prev, struct urb,
- anchor_list);
- __usb_unanchor_urb(victim, anchor);
- }
- spin_unlock_irqrestore(&anchor->lock, flags);
+ spin_unlock_irqrestore(&anchor->lock, flags);
+ cpu_relax();
+ } while (!surely_empty);
}
EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 98e7d1ee63dc..c893f54a3420 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -191,7 +191,6 @@ extern const struct attribute_group *usb_interface_groups[];
extern struct usb_driver usbfs_driver;
extern const struct file_operations usbfs_devices_fops;
extern const struct file_operations usbdev_file_operations;
-extern void usbfs_conn_disc_event(void);
extern int usb_devio_init(void);
extern void usb_devio_cleanup(void);
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
index 16e1aa304edc..c131719367ec 100644
--- a/drivers/usb/dwc2/Kconfig
+++ b/drivers/usb/dwc2/Kconfig
@@ -5,6 +5,7 @@ config USB_DWC2
depends on HAS_DMA
depends on USB || USB_GADGET
depends on HAS_IOMEM
+ select USB_ROLE_SWITCH
help
Say Y here if your system has a Dual Role Hi-Speed USB
controller based on the DesignWare HSOTG IP Core.
diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile
index 440320cc20a4..2bcd6945df46 100644
--- a/drivers/usb/dwc2/Makefile
+++ b/drivers/usb/dwc2/Makefile
@@ -3,7 +3,7 @@ ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG
ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG
obj-$(CONFIG_USB_DWC2) += dwc2.o
-dwc2-y := core.o core_intr.o platform.o
+dwc2-y := core.o core_intr.o platform.o drd.o
dwc2-y += params.o
ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 9deff0400a92..7161344c6522 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -860,6 +860,7 @@ struct dwc2_hregs_backup {
* - USB_DR_MODE_PERIPHERAL
* - USB_DR_MODE_HOST
* - USB_DR_MODE_OTG
+ * @role_sw: usb_role_switch handle
* @hcd_enabled: Host mode sub-driver initialization indicator.
* @gadget_enabled: Peripheral mode sub-driver initialization indicator.
* @ll_hw_enabled: Status of low-level hardware resources.
@@ -1054,6 +1055,7 @@ struct dwc2_hsotg {
struct dwc2_core_params params;
enum usb_otg_state op_state;
enum usb_dr_mode dr_mode;
+ struct usb_role_switch *role_sw;
unsigned int hcd_enabled:1;
unsigned int gadget_enabled:1;
unsigned int ll_hw_enabled:1;
@@ -1376,6 +1378,11 @@ static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
return (dwc2_readl(hsotg, GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
}
+int dwc2_drd_init(struct dwc2_hsotg *hsotg);
+void dwc2_drd_suspend(struct dwc2_hsotg *hsotg);
+void dwc2_drd_resume(struct dwc2_hsotg *hsotg);
+void dwc2_drd_exit(struct dwc2_hsotg *hsotg);
+
/*
* Dump core registers and SPRAM
*/
@@ -1392,6 +1399,7 @@ int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2);
int dwc2_gadget_init(struct dwc2_hsotg *hsotg);
void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
bool reset);
+void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg);
void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg);
void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2);
int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
@@ -1417,6 +1425,7 @@ static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg)
{ return 0; }
static inline void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
bool reset) {}
+static inline void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) {}
static inline void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg) {}
static inline void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2) {}
static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,
diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c
new file mode 100644
index 000000000000..2d4176f5788e
--- /dev/null
+++ b/drivers/usb/dwc2/drd.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drd.c - DesignWare USB2 DRD Controller Dual-role support
+ *
+ * Copyright (C) 2020 STMicroelectronics
+ *
+ * Author(s): Amelie Delaunay <amelie.delaunay@st.com>
+ */
+
+#include <linux/iopoll.h>
+#include <linux/platform_device.h>
+#include <linux/usb/role.h>
+#include "core.h"
+
+static void dwc2_ovr_init(struct dwc2_hsotg *hsotg)
+{
+ unsigned long flags;
+ u32 gotgctl;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ gotgctl = dwc2_readl(hsotg, GOTGCTL);
+ gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | GOTGCTL_VBVALOEN;
+ gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
+ gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
+ dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+ dwc2_force_mode(hsotg, false);
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
+static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
+{
+ u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+ /* Check if A-Session is already in the right state */
+ if ((valid && (gotgctl & GOTGCTL_ASESVLD)) ||
+ (!valid && !(gotgctl & GOTGCTL_ASESVLD)))
+ return -EALREADY;
+
+ if (valid)
+ gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL;
+ else
+ gotgctl &= ~(GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
+ dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+ return 0;
+}
+
+static int dwc2_ovr_bvalid(struct dwc2_hsotg *hsotg, bool valid)
+{
+ u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+ /* Check if B-Session is already in the right state */
+ if ((valid && (gotgctl & GOTGCTL_BSESVLD)) ||
+ (!valid && !(gotgctl & GOTGCTL_BSESVLD)))
+ return -EALREADY;
+
+ if (valid)
+ gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL;
+ else
+ gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL);
+ dwc2_writel(hsotg, gotgctl, GOTGCTL);
+
+ return 0;
+}
+
+static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
+{
+ struct dwc2_hsotg *hsotg = usb_role_switch_get_drvdata(sw);
+ unsigned long flags;
+ int already = 0;
+
+ /* Skip session not in line with dr_mode */
+ if ((role == USB_ROLE_DEVICE && hsotg->dr_mode == USB_DR_MODE_HOST) ||
+ (role == USB_ROLE_HOST && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
+ return -EINVAL;
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+ IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+ /* Skip session if core is in test mode */
+ if (role == USB_ROLE_NONE && hsotg->test_mode) {
+ dev_dbg(hsotg->dev, "Core is in test mode\n");
+ return -EBUSY;
+ }
+#endif
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ if (role == USB_ROLE_HOST) {
+ already = dwc2_ovr_avalid(hsotg, true);
+ } else if (role == USB_ROLE_DEVICE) {
+ already = dwc2_ovr_bvalid(hsotg, true);
+ /* This clear DCTL.SFTDISCON bit */
+ dwc2_hsotg_core_connect(hsotg);
+ } else {
+ if (dwc2_is_device_mode(hsotg)) {
+ if (!dwc2_ovr_bvalid(hsotg, false))
+ /* This set DCTL.SFTDISCON bit */
+ dwc2_hsotg_core_disconnect(hsotg);
+ } else {
+ dwc2_ovr_avalid(hsotg, false);
+ }
+ }
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ if (!already && hsotg->dr_mode == USB_DR_MODE_OTG)
+ /* This will raise a Connector ID Status Change Interrupt */
+ dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
+
+ dev_dbg(hsotg->dev, "%s-session valid\n",
+ role == USB_ROLE_NONE ? "No" :
+ role == USB_ROLE_HOST ? "A" : "B");
+
+ return 0;
+}
+
+int dwc2_drd_init(struct dwc2_hsotg *hsotg)
+{
+ struct usb_role_switch_desc role_sw_desc = {0};
+ struct usb_role_switch *role_sw;
+ int ret;
+
+ if (!device_property_read_bool(hsotg->dev, "usb-role-switch"))
+ return 0;
+
+ role_sw_desc.driver_data = hsotg;
+ role_sw_desc.fwnode = dev_fwnode(hsotg->dev);
+ role_sw_desc.set = dwc2_drd_role_sw_set;
+ role_sw_desc.allow_userspace_control = true;
+
+ role_sw = usb_role_switch_register(hsotg->dev, &role_sw_desc);
+ if (IS_ERR(role_sw)) {
+ ret = PTR_ERR(role_sw);
+ dev_err(hsotg->dev,
+ "failed to register role switch: %d\n", ret);
+ return ret;
+ }
+
+ hsotg->role_sw = role_sw;
+
+ /* Enable override and initialize values */
+ dwc2_ovr_init(hsotg);
+
+ return 0;
+}
+
+void dwc2_drd_suspend(struct dwc2_hsotg *hsotg)
+{
+ u32 gintsts, gintmsk;
+
+ if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
+ gintmsk = dwc2_readl(hsotg, GINTMSK);
+ gintmsk &= ~GINTSTS_CONIDSTSCHNG;
+ dwc2_writel(hsotg, gintmsk, GINTMSK);
+ gintsts = dwc2_readl(hsotg, GINTSTS);
+ dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
+ }
+}
+
+void dwc2_drd_resume(struct dwc2_hsotg *hsotg)
+{
+ u32 gintsts, gintmsk;
+
+ if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
+ gintsts = dwc2_readl(hsotg, GINTSTS);
+ dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
+ gintmsk = dwc2_readl(hsotg, GINTMSK);
+ gintmsk |= GINTSTS_CONIDSTSCHNG;
+ dwc2_writel(hsotg, gintmsk, GINTMSK);
+ }
+}
+
+void dwc2_drd_exit(struct dwc2_hsotg *hsotg)
+{
+ if (hsotg->role_sw)
+ usb_role_switch_unregister(hsotg->role_sw);
+}
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 5b9d23991c99..0a0d11151cfb 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -713,8 +713,11 @@ static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
*/
static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
{
+ const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
int is_isoc = hs_ep->isochronous;
unsigned int maxsize;
+ u32 mps = hs_ep->ep.maxpacket;
+ int dir_in = hs_ep->dir_in;
if (is_isoc)
maxsize = (hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :
@@ -723,6 +726,11 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
else
maxsize = DEV_DMA_NBYTES_LIMIT * MAX_DMA_DESC_NUM_GENERIC;
+ /* Interrupt OUT EP with mps not multiple of 4 */
+ if (hs_ep->index)
+ if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
+ maxsize = mps * MAX_DMA_DESC_NUM_GENERIC;
+
return maxsize;
}
@@ -738,11 +746,14 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
* Isochronous - descriptor rx/tx bytes bitfield limit,
* Control In/Bulk/Interrupt - multiple of mps. This will allow to not
* have concatenations from various descriptors within one packet.
+ * Interrupt OUT - if mps not multiple of 4 then a single packet corresponds
+ * to a single descriptor.
*
* Selects corresponding mask for RX/TX bytes as well.
*/
static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
{
+ const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
u32 mps = hs_ep->ep.maxpacket;
int dir_in = hs_ep->dir_in;
u32 desc_size = 0;
@@ -766,6 +777,13 @@ static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
desc_size -= desc_size % mps;
}
+ /* Interrupt OUT EP with mps not multiple of 4 */
+ if (hs_ep->index)
+ if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) {
+ desc_size = mps;
+ *mask = DEV_DMA_NBYTES_MASK;
+ }
+
return desc_size;
}
@@ -1123,13 +1141,7 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
length += (mps - (length % mps));
}
- /*
- * If more data to send, adjust DMA for EP0 out data stage.
- * ureq->dma stays unchanged, hence increment it by already
- * passed passed data count before starting new transaction.
- */
- if (!index && hsotg->ep0_state == DWC2_EP0_DATA_OUT &&
- continuing)
+ if (continuing)
offset = ureq->actual;
/* Fill DDMA chain entries */
@@ -2320,22 +2332,36 @@ static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg,
*/
static unsigned int dwc2_gadget_get_xfersize_ddma(struct dwc2_hsotg_ep *hs_ep)
{
+ const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
struct dwc2_hsotg *hsotg = hs_ep->parent;
unsigned int bytes_rem = 0;
+ unsigned int bytes_rem_correction = 0;
struct dwc2_dma_desc *desc = hs_ep->desc_list;
int i;
u32 status;
+ u32 mps = hs_ep->ep.maxpacket;
+ int dir_in = hs_ep->dir_in;
if (!desc)
return -EINVAL;
+ /* Interrupt OUT EP with mps not multiple of 4 */
+ if (hs_ep->index)
+ if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
+ bytes_rem_correction = 4 - (mps % 4);
+
for (i = 0; i < hs_ep->desc_count; ++i) {
status = desc->status;
bytes_rem += status & DEV_DMA_NBYTES_MASK;
+ bytes_rem -= bytes_rem_correction;
if (status & DEV_DMA_STS_MASK)
dev_err(hsotg->dev, "descriptor %d closed with %x\n",
i, status & DEV_DMA_STS_MASK);
+
+ if (status & DEV_DMA_L)
+ break;
+
desc++;
}
@@ -3530,7 +3556,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
dwc2_readl(hsotg, DOEPCTL0));
}
-static void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
+void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
{
/* set the soft-disconnect bit */
dwc2_set_bit(hsotg, DCTL, DCTL_SFTDISCON);
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 8f9d061c4d5f..267543c3dc38 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -185,7 +185,7 @@ static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
struct dwc2_core_params *p = &hsotg->params;
p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
- p->activate_stm_id_vb_detection = true;
+ p->activate_stm_id_vb_detection = !device_property_read_bool(hsotg->dev, "usb-role-switch");
p->host_rx_fifo_size = 440;
p->host_nperio_tx_fifo_size = 256;
p->host_perio_tx_fifo_size = 256;
@@ -210,6 +210,7 @@ const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "amlogic,meson-g12a-usb",
.data = dwc2_set_amlogic_g12a_params },
{ .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params },
+ { .compatible = "apm,apm82181-dwc-otg", .data = dwc2_set_amcc_params },
{ .compatible = "st,stm32f4x9-fsotg",
.data = dwc2_set_stm32f4x9_fsotg_params },
{ .compatible = "st,stm32f4x9-hsotg" },
@@ -860,7 +861,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
int dwc2_init_params(struct dwc2_hsotg *hsotg)
{
const struct of_device_id *match;
- void (*set_params)(void *data);
+ void (*set_params)(struct dwc2_hsotg *data);
dwc2_set_default_params(hsotg);
dwc2_get_device_properties(hsotg);
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index db9fd4bd1a38..e2820676beb1 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -121,6 +121,13 @@ static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
return 0;
}
+static void __dwc2_disable_regulators(void *data)
+{
+ struct dwc2_hsotg *hsotg = data;
+
+ regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+}
+
static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
@@ -131,6 +138,11 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
if (ret)
return ret;
+ ret = devm_add_action_or_reset(&pdev->dev,
+ __dwc2_disable_regulators, hsotg);
+ if (ret)
+ return ret;
+
if (hsotg->clk) {
ret = clk_prepare_enable(hsotg->clk);
if (ret)
@@ -186,10 +198,7 @@ static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
if (hsotg->clk)
clk_disable_unprepare(hsotg->clk);
- ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
- hsotg->supplies);
-
- return ret;
+ return 0;
}
/**
@@ -314,6 +323,8 @@ static int dwc2_driver_remove(struct platform_device *dev)
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
+ dwc2_drd_exit(hsotg);
+
if (hsotg->params.activate_stm_id_vb_detection)
regulator_disable(hsotg->usb33d);
@@ -533,10 +544,17 @@ static int dwc2_driver_probe(struct platform_device *dev)
dwc2_writel(hsotg, ggpio, GGPIO);
}
+ retval = dwc2_drd_init(hsotg);
+ if (retval) {
+ if (retval != -EPROBE_DEFER)
+ dev_err(hsotg->dev, "failed to initialize dual-role\n");
+ goto error_init;
+ }
+
if (hsotg->dr_mode != USB_DR_MODE_HOST) {
retval = dwc2_gadget_init(hsotg);
if (retval)
- goto error_init;
+ goto error_drd;
hsotg->gadget_enabled = 1;
}
@@ -562,7 +580,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
if (retval) {
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
- goto error_init;
+ goto error_drd;
}
hsotg->hcd_enabled = 1;
}
@@ -584,12 +602,19 @@ static int dwc2_driver_probe(struct platform_device *dev)
if (retval) {
hsotg->gadget.udc = NULL;
dwc2_hsotg_remove(hsotg);
- goto error_init;
+ goto error_debugfs;
}
}
#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
return 0;
+error_debugfs:
+ dwc2_debugfs_exit(hsotg);
+ if (hsotg->hcd_enabled)
+ dwc2_hcd_remove(hsotg);
+error_drd:
+ dwc2_drd_exit(hsotg);
+
error_init:
if (hsotg->params.activate_stm_id_vb_detection)
regulator_disable(hsotg->usb33d);
@@ -608,6 +633,8 @@ static int __maybe_unused dwc2_suspend(struct device *dev)
if (is_device_mode)
dwc2_hsotg_suspend(dwc2);
+ dwc2_drd_suspend(dwc2);
+
if (dwc2->params.activate_stm_id_vb_detection) {
unsigned long flags;
u32 ggpio, gotgctl;
@@ -688,6 +715,8 @@ static int __maybe_unused dwc2_resume(struct device *dev)
/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
dwc2_force_dr_mode(dwc2);
+ dwc2_drd_resume(dwc2);
+
if (dwc2_is_device_mode(dwc2))
ret = dwc2_hsotg_resume(dwc2);
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 2eb34c8b4065..bdf0925da6b6 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -119,9 +119,7 @@ static void __dwc3_set_mode(struct work_struct *work)
struct dwc3 *dwc = work_to_dwc(work);
unsigned long flags;
int ret;
-
- if (dwc->dr_mode != USB_DR_MODE_OTG)
- return;
+ u32 reg;
pm_runtime_get_sync(dwc->dev);
@@ -172,6 +170,11 @@ static void __dwc3_set_mode(struct work_struct *work)
otg_set_vbus(dwc->usb2_phy->otg, true);
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+ if (dwc->dis_split_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
}
break;
case DWC3_GCTL_PRTCAP_DEVICE:
@@ -203,6 +206,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
{
unsigned long flags;
+ if (dwc->dr_mode != USB_DR_MODE_OTG)
+ return;
+
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode;
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -929,13 +935,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
*/
dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
- /* Handle USB2.0-only core configuration */
- if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
- DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
- if (dwc->maximum_speed == USB_SPEED_SUPER)
- dwc->maximum_speed = USB_SPEED_HIGH;
- }
-
ret = dwc3_phy_setup(dwc);
if (ret)
goto err0;
@@ -1356,6 +1355,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->dis_metastability_quirk = device_property_read_bool(dev,
"snps,dis_metastability_quirk");
+ dwc->dis_split_quirk = device_property_read_bool(dev,
+ "snps,dis-split-quirk");
+
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@@ -1381,6 +1383,8 @@ bool dwc3_has_imod(struct dwc3 *dwc)
static void dwc3_check_params(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
+ unsigned int hwparam_gen =
+ DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3);
/* Check for proper value of imod_interval */
if (dwc->imod_interval && !dwc3_has_imod(dwc)) {
@@ -1404,25 +1408,40 @@ static void dwc3_check_params(struct dwc3 *dwc)
case USB_SPEED_LOW:
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
+ break;
case USB_SPEED_SUPER:
+ if (hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS)
+ dev_warn(dev, "UDC doesn't support Gen 1\n");
+ break;
case USB_SPEED_SUPER_PLUS:
+ if ((DWC3_IP_IS(DWC32) &&
+ hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS) ||
+ (!DWC3_IP_IS(DWC32) &&
+ hwparam_gen != DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+ dev_warn(dev, "UDC doesn't support SSP\n");
break;
default:
dev_err(dev, "invalid maximum_speed parameter %d\n",
dwc->maximum_speed);
fallthrough;
case USB_SPEED_UNKNOWN:
- /* default to superspeed */
- dwc->maximum_speed = USB_SPEED_SUPER;
-
- /*
- * default to superspeed plus if we are capable.
- */
- if ((DWC3_IP_IS(DWC31) || DWC3_IP_IS(DWC32)) &&
- (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
- DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+ switch (hwparam_gen) {
+ case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2:
dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
-
+ break;
+ case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1:
+ if (DWC3_IP_IS(DWC32))
+ dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+ else
+ dwc->maximum_speed = USB_SPEED_SUPER;
+ break;
+ case DWC3_GHWPARAMS3_SSPHY_IFC_DIS:
+ dwc->maximum_speed = USB_SPEED_HIGH;
+ break;
+ default:
+ dwc->maximum_speed = USB_SPEED_SUPER;
+ break;
+ }
break;
}
}
@@ -1554,6 +1573,17 @@ static int dwc3_probe(struct platform_device *pdev)
err5:
dwc3_event_buffers_cleanup(dwc);
+
+ usb_phy_shutdown(dwc->usb2_phy);
+ usb_phy_shutdown(dwc->usb3_phy);
+ phy_exit(dwc->usb2_generic_phy);
+ phy_exit(dwc->usb3_generic_phy);
+
+ usb_phy_set_suspend(dwc->usb2_phy, 1);
+ usb_phy_set_suspend(dwc->usb3_phy, 1);
+ phy_power_off(dwc->usb2_generic_phy);
+ phy_power_off(dwc->usb3_generic_phy);
+
dwc3_ulpi_exit(dwc);
err4:
@@ -1589,9 +1619,9 @@ static int dwc3_remove(struct platform_device *pdev)
dwc3_core_exit(dwc);
dwc3_ulpi_exit(dwc);
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_allow(&pdev->dev);
pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
dwc3_free_event_buffers(dwc);
dwc3_free_scratch_buffers(dwc);
@@ -1865,10 +1895,26 @@ static int dwc3_resume(struct device *dev)
return 0;
}
+
+static void dwc3_complete(struct device *dev)
+{
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+ u32 reg;
+
+ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
+ dwc->dis_split_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
+ reg |= DWC3_GUCTL3_SPLITDISABLE;
+ dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
+ }
+}
+#else
+#define dwc3_complete NULL
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops dwc3_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+ .complete = dwc3_complete,
SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
dwc3_runtime_idle)
};
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 2f04b3e42bf1..74323b10a64a 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -138,6 +138,7 @@
#define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10))
#define DWC3_GHWPARAMS8 0xc600
+#define DWC3_GUCTL3 0xc60c
#define DWC3_GFLADJ 0xc630
/* Device Registers */
@@ -380,6 +381,9 @@
/* Global User Control Register 2 */
#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE BIT(14)
+
/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
@@ -634,7 +638,7 @@ struct dwc3_trb;
struct dwc3_event_buffer {
void *buf;
void *cache;
- unsigned length;
+ unsigned int length;
unsigned int lpos;
unsigned int count;
unsigned int flags;
@@ -694,7 +698,7 @@ struct dwc3_ep {
struct dwc3 *dwc;
u32 saved_state;
- unsigned flags;
+ unsigned int flags;
#define DWC3_EP_ENABLED BIT(0)
#define DWC3_EP_STALL BIT(1)
#define DWC3_EP_WEDGE BIT(2)
@@ -706,6 +710,7 @@ struct dwc3_ep {
#define DWC3_EP_IGNORE_NEXT_NOSTREAM BIT(8)
#define DWC3_EP_FORCE_RESTART_STREAM BIT(9)
#define DWC3_EP_FIRST_STREAM_PRIMED BIT(10)
+#define DWC3_EP_PENDING_CLEAR_STALL BIT(11)
/* This last one is specific to EP0 */
#define DWC3_EP0_DIR_IN BIT(31)
@@ -893,9 +898,9 @@ struct dwc3_request {
struct scatterlist *sg;
struct scatterlist *start_sg;
- unsigned num_pending_sgs;
+ unsigned int num_pending_sgs;
unsigned int num_queued_sgs;
- unsigned remaining;
+ unsigned int remaining;
unsigned int status;
#define DWC3_REQUEST_STATUS_QUEUED 0
@@ -908,11 +913,11 @@ struct dwc3_request {
struct dwc3_trb *trb;
dma_addr_t trb_dma;
- unsigned num_trbs;
+ unsigned int num_trbs;
- unsigned needs_extra_trb:1;
- unsigned direction:1;
- unsigned mapped:1;
+ unsigned int needs_extra_trb:1;
+ unsigned int direction:1;
+ unsigned int mapped:1;
};
/*
@@ -1010,8 +1015,8 @@ struct dwc3_scratchpad_array {
* @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
* there's now way for software to detect this in runtime.
* @is_utmi_l1_suspend: the core asserts output signal
- * 0 - utmi_sleep_n
- * 1 - utmi_l1_suspend_n
+ * 0 - utmi_sleep_n
+ * 1 - utmi_l1_suspend_n
* @is_fpga: true when we are using the FPGA board
* @pending_events: true when we have pending IRQs to be handled
* @pullups_connected: true when Run/Stop bit is set
@@ -1047,13 +1052,14 @@ struct dwc3_scratchpad_array {
* instances in park mode.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
- * 0 - -6dB de-emphasis
- * 1 - -3.5dB de-emphasis
- * 2 - No de-emphasis
- * 3 - Reserved
+ * 0 - -6dB de-emphasis
+ * 1 - -3.5dB de-emphasis
+ * 2 - No de-emphasis
+ * 3 - Reserved
* @dis_metastability_quirk: set to disable metastability quirk.
+ * @dis_split_quirk: set to disable split boundary.
* @imod_interval: set the interrupt moderation interval in 250ns
- * increments or 0 to disable.
+ * increments or 0 to disable.
*/
struct dwc3 {
struct work_struct drd_work;
@@ -1079,7 +1085,7 @@ struct dwc3 {
struct dwc3_event_buffer *ev_buf;
struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
- struct usb_gadget gadget;
+ struct usb_gadget *gadget;
struct usb_gadget_driver *gadget_driver;
struct clk_bulk_data *clks;
@@ -1245,6 +1251,8 @@ struct dwc3 {
unsigned dis_metastability_quirk:1;
+ unsigned dis_split_quirk:1;
+
u16 imod_interval;
};
@@ -1456,9 +1464,10 @@ void dwc3_gadget_exit(struct dwc3 *dwc);
int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
int dwc3_gadget_get_link_state(struct dwc3 *dwc);
int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
-int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
struct dwc3_gadget_ep_cmd_params *params);
-int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param);
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
+ u32 param);
#else
static inline int dwc3_gadget_init(struct dwc3 *dwc)
{ return 0; }
@@ -1472,7 +1481,7 @@ static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc,
enum dwc3_link_state state)
{ return 0; }
-static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
struct dwc3_gadget_ep_cmd_params *params)
{ return 0; }
static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index 3d16dac4e5cc..8ab394942360 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -371,7 +371,9 @@ static inline const char *dwc3_gadget_event_type_string(u8 event)
static inline const char *dwc3_decode_event(char *str, size_t size, u32 event,
u32 ep0state)
{
- const union dwc3_event evt = (union dwc3_event) event;
+ union dwc3_event evt;
+
+ memcpy(&evt, &event, sizeof(event));
if (evt.type.is_devspec)
return dwc3_gadget_event_string(str, size, &evt.devt);
@@ -411,8 +413,8 @@ static inline const char *dwc3_gadget_generic_cmd_status_string(int status)
#ifdef CONFIG_DEBUG_FS
-extern void dwc3_debugfs_init(struct dwc3 *);
-extern void dwc3_debugfs_exit(struct dwc3 *);
+extern void dwc3_debugfs_init(struct dwc3 *d);
+extern void dwc3_debugfs_exit(struct dwc3 *d);
#else
static inline void dwc3_debugfs_init(struct dwc3 *d)
{ }
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 2c7b6dd79cdf..5da4f6082d93 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -397,13 +397,13 @@ static int dwc3_mode_show(struct seq_file *s, void *unused)
switch (DWC3_GCTL_PRTCAP(reg)) {
case DWC3_GCTL_PRTCAP_HOST:
- seq_printf(s, "host\n");
+ seq_puts(s, "host\n");
break;
case DWC3_GCTL_PRTCAP_DEVICE:
- seq_printf(s, "device\n");
+ seq_puts(s, "device\n");
break;
case DWC3_GCTL_PRTCAP_OTG:
- seq_printf(s, "otg\n");
+ seq_puts(s, "otg\n");
break;
default:
seq_printf(s, "UNKNOWN %08x\n", DWC3_GCTL_PRTCAP(reg));
@@ -428,6 +428,9 @@ static ssize_t dwc3_mode_write(struct file *file,
if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
+ if (dwc->dr_mode != USB_DR_MODE_OTG)
+ return count;
+
if (!strncmp(buf, "host", 4))
mode = DWC3_GCTL_PRTCAP_HOST;
@@ -464,22 +467,22 @@ static int dwc3_testmode_show(struct seq_file *s, void *unused)
switch (reg) {
case 0:
- seq_printf(s, "no test\n");
+ seq_puts(s, "no test\n");
break;
case USB_TEST_J:
- seq_printf(s, "test_j\n");
+ seq_puts(s, "test_j\n");
break;
case USB_TEST_K:
- seq_printf(s, "test_k\n");
+ seq_puts(s, "test_k\n");
break;
case USB_TEST_SE0_NAK:
- seq_printf(s, "test_se0_nak\n");
+ seq_puts(s, "test_se0_nak\n");
break;
case USB_TEST_PACKET:
- seq_printf(s, "test_packet\n");
+ seq_puts(s, "test_packet\n");
break;
case USB_TEST_FORCE_ENABLE:
- seq_printf(s, "test_force_enable\n");
+ seq_puts(s, "test_force_enable\n");
break;
default:
seq_printf(s, "UNKNOWN %d\n", reg);
@@ -760,27 +763,26 @@ static int dwc3_transfer_type_show(struct seq_file *s, void *unused)
unsigned long flags;
spin_lock_irqsave(&dwc->lock, flags);
- if (!(dep->flags & DWC3_EP_ENABLED) ||
- !dep->endpoint.desc) {
- seq_printf(s, "--\n");
+ if (!(dep->flags & DWC3_EP_ENABLED) || !dep->endpoint.desc) {
+ seq_puts(s, "--\n");
goto out;
}
switch (usb_endpoint_type(dep->endpoint.desc)) {
case USB_ENDPOINT_XFER_CONTROL:
- seq_printf(s, "control\n");
+ seq_puts(s, "control\n");
break;
case USB_ENDPOINT_XFER_ISOC:
- seq_printf(s, "isochronous\n");
+ seq_puts(s, "isochronous\n");
break;
case USB_ENDPOINT_XFER_BULK:
- seq_printf(s, "bulk\n");
+ seq_puts(s, "bulk\n");
break;
case USB_ENDPOINT_XFER_INT:
- seq_printf(s, "interrupt\n");
+ seq_puts(s, "interrupt\n");
break;
default:
- seq_printf(s, "--\n");
+ seq_puts(s, "--\n");
}
out:
@@ -798,11 +800,11 @@ static int dwc3_trb_ring_show(struct seq_file *s, void *unused)
spin_lock_irqsave(&dwc->lock, flags);
if (dep->number <= 1) {
- seq_printf(s, "--\n");
+ seq_puts(s, "--\n");
goto out;
}
- seq_printf(s, "buffer_addr,size,type,ioc,isp_imi,csp,chn,lst,hwo\n");
+ seq_puts(s, "buffer_addr,size,type,ioc,isp_imi,csp,chn,lst,hwo\n");
for (i = 0; i < DWC3_TRB_NUM; i++) {
struct dwc3_trb *trb = &dep->trb_pool[i];
@@ -884,7 +886,7 @@ static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep,
const struct file_operations *fops = dwc3_ep_file_map[i].fops;
const char *name = dwc3_ep_file_map[i].name;
- debugfs_create_file(name, S_IRUGO, parent, dep, fops);
+ debugfs_create_file(name, 0444, parent, dep, fops);
}
}
@@ -929,21 +931,18 @@ void dwc3_debugfs_init(struct dwc3 *dwc)
root = debugfs_create_dir(dev_name(dwc->dev), usb_debug_root);
dwc->root = root;
- debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset);
-
- debugfs_create_file("lsp_dump", S_IRUGO | S_IWUSR, root, dwc,
- &dwc3_lsp_fops);
+ debugfs_create_regset32("regdump", 0444, root, dwc->regset);
+ debugfs_create_file("lsp_dump", 0644, root, dwc, &dwc3_lsp_fops);
- if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) {
- debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, dwc,
+ if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE))
+ debugfs_create_file("mode", 0644, root, dwc,
&dwc3_mode_fops);
- }
if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) ||
IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
- debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, dwc,
- &dwc3_testmode_fops);
- debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root, dwc,
+ debugfs_create_file("testmode", 0644, root, dwc,
+ &dwc3_testmode_fops);
+ debugfs_create_file("link_state", 0644, root, dwc,
&dwc3_link_state_fops);
dwc3_debugfs_create_endpoint_dirs(dwc, root);
}
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 1f7f4d88ed9d..417e05381b5d 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -116,23 +116,24 @@ static struct clk_bulk_data meson_a1_clocks[] = {
{ .id = "xtal_usb_ctrl" },
};
-static const char *meson_gxm_phy_names[] = {
+static const char * const meson_gxm_phy_names[] = {
"usb2-phy0", "usb2-phy1", "usb2-phy2",
};
-static const char *meson_g12a_phy_names[] = {
+static const char * const meson_g12a_phy_names[] = {
"usb2-phy0", "usb2-phy1", "usb3-phy0",
};
/*
* Amlogic A1 has a single physical PHY, in slot 1, but still has the
* two U2 PHY controls register blocks like G12A.
+ * AXG has the similar scheme, thus needs the same tweak.
* Handling the first PHY on slot 1 would need a large amount of code
* changes, and the current management is generic enough to handle it
* correctly when only the "usb2-phy1" phy is specified on-par with the
* DT bindings.
*/
-static const char *meson_a1_phy_names[] = {
+static const char * const meson_a1_phy_names[] = {
"usb2-phy0", "usb2-phy1"
};
@@ -143,7 +144,7 @@ struct dwc3_meson_g12a_drvdata {
bool otg_phy_host_port_disable;
struct clk_bulk_data *clks;
int num_clks;
- const char **phy_names;
+ const char * const *phy_names;
int num_phys;
int (*setup_regmaps)(struct dwc3_meson_g12a *priv, void __iomem *base);
int (*usb2_init_phy)(struct dwc3_meson_g12a *priv, int i,
@@ -215,6 +216,19 @@ static struct dwc3_meson_g12a_drvdata gxm_drvdata = {
.usb_post_init = dwc3_meson_gxl_usb_post_init,
};
+static struct dwc3_meson_g12a_drvdata axg_drvdata = {
+ .otg_switch_supported = true,
+ .clks = meson_gxl_clocks,
+ .num_clks = ARRAY_SIZE(meson_gxl_clocks),
+ .phy_names = meson_a1_phy_names,
+ .num_phys = ARRAY_SIZE(meson_a1_phy_names),
+ .setup_regmaps = dwc3_meson_gxl_setup_regmaps,
+ .usb2_init_phy = dwc3_meson_gxl_usb2_init_phy,
+ .set_phy_mode = dwc3_meson_gxl_set_phy_mode,
+ .usb_init = dwc3_meson_g12a_usb_init,
+ .usb_post_init = dwc3_meson_gxl_usb_post_init,
+};
+
static struct dwc3_meson_g12a_drvdata g12a_drvdata = {
.otg_switch_supported = true,
.clks = meson_g12a_clocks,
@@ -520,11 +534,7 @@ static int dwc3_meson_g12a_role_set(struct usb_role_switch *sw,
return 0;
if (priv->drvdata->otg_phy_host_port_disable)
- dev_warn_once(priv->dev, "Manual OTG switch is broken on this "\
- "SoC, when manual switching from "\
- "Host to device, DWC3 controller "\
- "will need to be resetted in order "\
- "to recover usage of the Host port");
+ dev_warn_once(priv->dev, "Broken manual OTG switch\n");
return dwc3_meson_g12a_otg_mode_set(priv, mode);
}
@@ -626,10 +636,7 @@ static int dwc3_meson_gxl_setup_regmaps(struct dwc3_meson_g12a *priv,
/* GXL controls the PHY mode in the PHY registers unlike G12A */
priv->usb_glue_regmap = devm_regmap_init_mmio(priv->dev, base,
&phy_meson_g12a_usb_glue_regmap_conf);
- if (IS_ERR(priv->usb_glue_regmap))
- return PTR_ERR(priv->usb_glue_regmap);
-
- return 0;
+ return PTR_ERR_OR_ZERO(priv->usb_glue_regmap);
}
static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
@@ -906,8 +913,8 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
return ret;
}
- if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
- ret = regulator_enable(priv->vbus);
+ if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+ ret = regulator_enable(priv->vbus);
if (ret)
return ret;
}
@@ -931,6 +938,10 @@ static const struct of_device_id dwc3_meson_g12a_match[] = {
.data = &gxm_drvdata,
},
{
+ .compatible = "amlogic,meson-axg-usb-ctrl",
+ .data = &axg_drvdata,
+ },
+ {
.compatible = "amlogic,meson-g12a-usb-ctrl",
.data = &g12a_drvdata,
},
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 7df115012935..e62ecd22b3ed 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -176,6 +176,8 @@ static const struct of_device_id of_dwc3_simple_match[] = {
{ .compatible = "cavium,octeon-7130-usb-uctl" },
{ .compatible = "sprd,sc9860-dwc3" },
{ .compatible = "allwinner,sun50i-h6-dwc3" },
+ { .compatible = "hisilicon,hi3670-dwc3" },
+ { .compatible = "intel,keembay-dwc3" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index f5a61f57c74f..242b6210380a 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -147,7 +147,8 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
if (pdev->device == PCI_DEVICE_ID_INTEL_BXT ||
- pdev->device == PCI_DEVICE_ID_INTEL_BXT_M) {
+ pdev->device == PCI_DEVICE_ID_INTEL_BXT_M ||
+ pdev->device == PCI_DEVICE_ID_INTEL_EHLLP) {
guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid);
dwc->has_dsm_for_pm = true;
}
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index e1e78e9824b1..c703d552bbcf 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/extcon.h>
+#include <linux/interconnect.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
@@ -43,6 +44,14 @@
#define SDM845_QSCRATCH_SIZE 0x400
#define SDM845_DWC3_CORE_SIZE 0xcd00
+/* Interconnect path bandwidths in MBps */
+#define USB_MEMORY_AVG_HS_BW MBps_to_icc(240)
+#define USB_MEMORY_PEAK_HS_BW MBps_to_icc(700)
+#define USB_MEMORY_AVG_SS_BW MBps_to_icc(1000)
+#define USB_MEMORY_PEAK_SS_BW MBps_to_icc(2500)
+#define APPS_USB_AVG_BW 0
+#define APPS_USB_PEAK_BW MBps_to_icc(40)
+
struct dwc3_acpi_pdata {
u32 qscratch_base_offset;
u32 qscratch_base_size;
@@ -76,6 +85,8 @@ struct dwc3_qcom {
enum usb_dr_mode mode;
bool is_suspended;
bool pm_suspended;
+ struct icc_path *icc_path_ddr;
+ struct icc_path *icc_path_apps;
};
static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
@@ -190,6 +201,96 @@ static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom)
return 0;
}
+static int dwc3_qcom_interconnect_enable(struct dwc3_qcom *qcom)
+{
+ int ret;
+
+ ret = icc_enable(qcom->icc_path_ddr);
+ if (ret)
+ return ret;
+
+ ret = icc_enable(qcom->icc_path_apps);
+ if (ret)
+ icc_disable(qcom->icc_path_ddr);
+
+ return ret;
+}
+
+static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom)
+{
+ int ret;
+
+ ret = icc_disable(qcom->icc_path_ddr);
+ if (ret)
+ return ret;
+
+ ret = icc_disable(qcom->icc_path_apps);
+ if (ret)
+ icc_enable(qcom->icc_path_ddr);
+
+ return ret;
+}
+
+/**
+ * dwc3_qcom_interconnect_init() - Get interconnect path handles
+ * and set bandwidhth.
+ * @qcom: Pointer to the concerned usb core.
+ *
+ */
+static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
+{
+ struct device *dev = qcom->dev;
+ int ret;
+
+ qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
+ if (IS_ERR(qcom->icc_path_ddr)) {
+ dev_err(dev, "failed to get usb-ddr path: %ld\n",
+ PTR_ERR(qcom->icc_path_ddr));
+ return PTR_ERR(qcom->icc_path_ddr);
+ }
+
+ qcom->icc_path_apps = of_icc_get(dev, "apps-usb");
+ if (IS_ERR(qcom->icc_path_apps)) {
+ dev_err(dev, "failed to get apps-usb path: %ld\n",
+ PTR_ERR(qcom->icc_path_apps));
+ return PTR_ERR(qcom->icc_path_apps);
+ }
+
+ if (usb_get_maximum_speed(&qcom->dwc3->dev) >= USB_SPEED_SUPER ||
+ usb_get_maximum_speed(&qcom->dwc3->dev) == USB_SPEED_UNKNOWN)
+ ret = icc_set_bw(qcom->icc_path_ddr,
+ USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
+ else
+ ret = icc_set_bw(qcom->icc_path_ddr,
+ USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
+
+ if (ret) {
+ dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret);
+ return ret;
+ }
+
+ ret = icc_set_bw(qcom->icc_path_apps,
+ APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
+ if (ret) {
+ dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * dwc3_qcom_interconnect_exit() - Release interconnect path handles
+ * @qcom: Pointer to the concerned usb core.
+ *
+ * This function is used to release interconnect path handle.
+ */
+static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
+{
+ icc_put(qcom->icc_path_ddr);
+ icc_put(qcom->icc_path_apps);
+}
+
static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
{
if (qcom->hs_phy_irq) {
@@ -239,7 +340,7 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
{
u32 val;
- int i;
+ int i, ret;
if (qcom->is_suspended)
return 0;
@@ -251,6 +352,10 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
for (i = qcom->num_clocks - 1; i >= 0; i--)
clk_disable_unprepare(qcom->clks[i]);
+ ret = dwc3_qcom_interconnect_disable(qcom);
+ if (ret)
+ dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret);
+
qcom->is_suspended = true;
dwc3_qcom_enable_interrupts(qcom);
@@ -276,6 +381,10 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
}
}
+ ret = dwc3_qcom_interconnect_enable(qcom);
+ if (ret)
+ dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
+
/* Clear existing events from PHY related to L2 in/out */
dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
@@ -335,7 +444,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
- int irq, ret;
+ int irq;
+ int ret;
+
irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq",
pdata ? pdata->hs_phy_irq_index : -1);
if (irq > 0) {
@@ -454,7 +565,7 @@ static const struct property_entry dwc3_qcom_acpi_properties[] = {
static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
{
- struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+ struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
struct resource *res, *child_res = NULL;
int irq;
@@ -514,7 +625,7 @@ out:
static int dwc3_qcom_of_register_core(struct platform_device *pdev)
{
- struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+ struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
struct device_node *np = pdev->dev.of_node, *dwc3_np;
struct device *dev = &pdev->dev;
int ret;
@@ -638,6 +749,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
goto depopulate;
}
+ ret = dwc3_qcom_interconnect_init(qcom);
+ if (ret)
+ goto depopulate;
+
qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
/* enable vbus override for device mode */
@@ -647,7 +762,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
/* register extcon to override sw_vbus on Vbus change later */
ret = dwc3_qcom_register_extcon(qcom);
if (ret)
- goto depopulate;
+ goto interconnect_exit;
device_init_wakeup(&pdev->dev, 1);
qcom->is_suspended = false;
@@ -657,6 +772,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
return 0;
+interconnect_exit:
+ dwc3_qcom_interconnect_exit(qcom);
depopulate:
if (np)
of_platform_depopulate(&pdev->dev);
@@ -687,6 +804,7 @@ static int dwc3_qcom_remove(struct platform_device *pdev)
}
qcom->num_clocks = 0;
+ dwc3_qcom_interconnect_exit(qcom);
reset_control_assert(qcom->resets);
pm_runtime_allow(dev);
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 59f2e8c31bd1..7be3903cb842 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -105,7 +105,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
* IRQ we were waiting for is long gone.
*/
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
- unsigned direction;
+ unsigned int direction;
direction = !!(dep->flags & DWC3_EP0_DIR_IN);
@@ -127,11 +127,11 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
* handle it here.
*/
if (dwc->delayed_status) {
- unsigned direction;
+ unsigned int direction;
direction = !dwc->ep0_expect_in;
dwc->delayed_status = false;
- usb_gadget_set_state(&dwc->gadget, USB_STATE_CONFIGURED);
+ usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED);
if (dwc->ep0state == EP0_STATUS_PHASE)
__dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
@@ -172,7 +172,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
* XferNotReady(STATUS).
*/
if (dwc->three_stage_setup) {
- unsigned direction;
+ unsigned int direction;
direction = dwc->ep0_expect_in;
dwc->ep0state = EP0_DATA_PHASE;
@@ -197,7 +197,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
int ret;
spin_lock_irqsave(&dwc->lock, flags);
- if (!dep->endpoint.desc) {
+ if (!dep->endpoint.desc || !dwc->pullups_connected) {
dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
dep->name);
ret = -ESHUTDOWN;
@@ -325,7 +325,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
/*
* LTM will be set once we know how to set this in HW.
*/
- usb_status |= dwc->gadget.is_selfpowered;
+ usb_status |= dwc->gadget->is_selfpowered;
if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
(dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
@@ -450,7 +450,7 @@ static int dwc3_ep0_handle_device(struct dwc3 *dwc,
wValue = le16_to_cpu(ctrl->wValue);
wIndex = le16_to_cpu(ctrl->wIndex);
- state = dwc->gadget.state;
+ state = dwc->gadget->state;
switch (wValue) {
case USB_DEVICE_REMOTE_WAKEUP:
@@ -524,6 +524,11 @@ static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc,
ret = __dwc3_gadget_ep_set_halt(dep, set, true);
if (ret)
return -EINVAL;
+
+ /* ClearFeature(Halt) may need delayed status */
+ if (!set && (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
+ return USB_GADGET_DELAYED_STATUS;
+
break;
default:
return -EINVAL;
@@ -559,7 +564,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
- enum usb_device_state state = dwc->gadget.state;
+ enum usb_device_state state = dwc->gadget->state;
u32 addr;
u32 reg;
@@ -580,9 +585,9 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
if (addr)
- usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS);
+ usb_gadget_set_state(dwc->gadget, USB_STATE_ADDRESS);
else
- usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT);
+ usb_gadget_set_state(dwc->gadget, USB_STATE_DEFAULT);
return 0;
}
@@ -592,14 +597,14 @@ static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
int ret;
spin_unlock(&dwc->lock);
- ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
+ ret = dwc->gadget_driver->setup(dwc->gadget, ctrl);
spin_lock(&dwc->lock);
return ret;
}
static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
- enum usb_device_state state = dwc->gadget.state;
+ enum usb_device_state state = dwc->gadget->state;
u32 cfg;
int ret;
u32 reg;
@@ -622,7 +627,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
* to change the state on the next usb_ep_queue()
*/
if (ret == 0)
- usb_gadget_set_state(&dwc->gadget,
+ usb_gadget_set_state(dwc->gadget,
USB_STATE_CONFIGURED);
/*
@@ -641,7 +646,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
case USB_STATE_CONFIGURED:
ret = dwc3_ep0_delegate_req(dwc, ctrl);
if (!cfg && !ret)
- usb_gadget_set_state(&dwc->gadget,
+ usb_gadget_set_state(dwc->gadget,
USB_STATE_ADDRESS);
break;
default:
@@ -697,7 +702,7 @@ static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
struct dwc3_ep *dep;
- enum usb_device_state state = dwc->gadget.state;
+ enum usb_device_state state = dwc->gadget->state;
u16 wLength;
if (state == USB_STATE_DEFAULT)
@@ -741,7 +746,7 @@ static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ct
if (wIndex || wLength)
return -EINVAL;
- dwc->gadget.isoch_delay = wValue;
+ dwc->gadget->isoch_delay = wValue;
return 0;
}
@@ -942,12 +947,16 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
struct dwc3_ep *dep, struct dwc3_request *req)
{
+ unsigned int trb_length = 0;
int ret;
req->direction = !!dep->number;
if (req->request.length == 0) {
- dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0,
+ if (!req->direction)
+ trb_length = dep->endpoint.maxpacket;
+
+ dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, trb_length,
DWC3_TRBCTL_CONTROL_DATA, false);
ret = dwc3_ep0_start_trans(dep);
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
@@ -994,9 +1003,12 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
+ if (!req->direction)
+ trb_length = dep->endpoint.maxpacket;
+
/* Now prepare one extra TRB to align transfer size */
dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
- 0, DWC3_TRBCTL_CONTROL_DATA,
+ trb_length, DWC3_TRBCTL_CONTROL_DATA,
false);
ret = dwc3_ep0_start_trans(dep);
} else {
@@ -1042,6 +1054,17 @@ static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
__dwc3_ep0_do_control_status(dwc, dep);
}
+void dwc3_ep0_send_delayed_status(struct dwc3 *dwc)
+{
+ unsigned int direction = !dwc->ep0_expect_in;
+
+ if (dwc->ep0state != EP0_STATUS_PHASE)
+ return;
+
+ dwc->delayed_status = false;
+ __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
+}
+
static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_gadget_ep_cmd_params params;
@@ -1102,7 +1125,7 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
*/
if (!list_empty(&dep->pending_list)) {
dwc->delayed_status = false;
- usb_gadget_set_state(&dwc->gadget,
+ usb_gadget_set_state(dwc->gadget,
USB_STATE_CONFIGURED);
dwc3_ep0_do_control_status(dwc, event);
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c2a0f64f8d1e..78cb4db8a6e4 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -227,7 +227,8 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
* Caller should take care of locking. Issue @cmd with a given @param to @dwc
* and wait for its completion.
*/
-int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
+ u32 param)
{
u32 timeout = 500;
int status = 0;
@@ -268,7 +269,7 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc);
* Caller should handle locking. This function will issue @cmd with given
* @params to @dep and wait for its completion.
*/
-int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
struct dwc3_gadget_ep_cmd_params *params)
{
const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
@@ -290,7 +291,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
*
* DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2
*/
- if (dwc->gadget.speed <= USB_SPEED_HIGH) {
+ if (dwc->gadget->speed <= USB_SPEED_HIGH) {
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
saved_config |= DWC3_GUSB2PHYCFG_SUSPHY;
@@ -422,7 +423,7 @@ static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep)
*/
if (dep->direction &&
!DWC3_VER_IS_PRIOR(DWC3, 260A) &&
- (dwc->gadget.speed >= USB_SPEED_SUPER))
+ (dwc->gadget->speed >= USB_SPEED_SUPER))
cmd |= DWC3_DEPCMD_CLEARPENDIN;
memset(&params, 0, sizeof(params));
@@ -562,8 +563,9 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action)
| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
/* Burst size is only needed in SuperSpeed mode */
- if (dwc->gadget.speed >= USB_SPEED_SUPER) {
+ if (dwc->gadget->speed >= USB_SPEED_SUPER) {
u32 burst = dep->endpoint.maxburst;
+
params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1);
}
@@ -942,12 +944,13 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
}
static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
- dma_addr_t dma, unsigned length, unsigned chain, unsigned node,
- unsigned stream_id, unsigned short_not_ok,
- unsigned no_interrupt, unsigned is_last)
+ dma_addr_t dma, unsigned int length, unsigned int chain,
+ unsigned int node, unsigned int stream_id,
+ unsigned int short_not_ok, unsigned int no_interrupt,
+ unsigned int is_last, bool must_interrupt)
{
struct dwc3 *dwc = dep->dwc;
- struct usb_gadget *gadget = &dwc->gadget;
+ struct usb_gadget *gadget = dwc->gadget;
enum usb_device_speed speed = gadget->speed;
trb->size = DWC3_TRB_SIZE_LENGTH(length);
@@ -1031,8 +1034,7 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
}
- if ((!no_interrupt && !chain) ||
- (dwc3_calc_trbs_left(dep) == 1))
+ if ((!no_interrupt && !chain) || must_interrupt)
trb->ctrl |= DWC3_TRB_CTRL_IOC;
if (chain)
@@ -1057,19 +1059,24 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
* @trb_length: buffer size of the TRB
* @chain: should this TRB be chained to the next?
* @node: only for isochronous endpoints. First TRB needs different type.
+ * @use_bounce_buffer: set to use bounce buffer
+ * @must_interrupt: set to interrupt on TRB completion
*/
static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
struct dwc3_request *req, unsigned int trb_length,
- unsigned chain, unsigned node)
+ unsigned int chain, unsigned int node, bool use_bounce_buffer,
+ bool must_interrupt)
{
struct dwc3_trb *trb;
dma_addr_t dma;
- unsigned stream_id = req->request.stream_id;
- unsigned short_not_ok = req->request.short_not_ok;
- unsigned no_interrupt = req->request.no_interrupt;
- unsigned is_last = req->request.is_last;
-
- if (req->request.num_sgs > 0)
+ unsigned int stream_id = req->request.stream_id;
+ unsigned int short_not_ok = req->request.short_not_ok;
+ unsigned int no_interrupt = req->request.no_interrupt;
+ unsigned int is_last = req->request.is_last;
+
+ if (use_bounce_buffer)
+ dma = dep->dwc->bounce_addr;
+ else if (req->request.num_sgs > 0)
dma = sg_dma_address(req->start_sg);
else
dma = req->request.dma;
@@ -1085,10 +1092,63 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
req->num_trbs++;
__dwc3_prepare_one_trb(dep, trb, dma, trb_length, chain, node,
- stream_id, short_not_ok, no_interrupt, is_last);
+ stream_id, short_not_ok, no_interrupt, is_last,
+ must_interrupt);
}
-static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
+static bool dwc3_needs_extra_trb(struct dwc3_ep *dep, struct dwc3_request *req)
+{
+ unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+ unsigned int rem = req->request.length % maxp;
+
+ if ((req->request.length && req->request.zero && !rem &&
+ !usb_endpoint_xfer_isoc(dep->endpoint.desc)) ||
+ (!req->direction && rem))
+ return true;
+
+ return false;
+}
+
+/**
+ * dwc3_prepare_last_sg - prepare TRBs for the last SG entry
+ * @dep: The endpoint that the request belongs to
+ * @req: The request to prepare
+ * @entry_length: The last SG entry size
+ * @node: Indicates whether this is not the first entry (for isoc only)
+ *
+ * Return the number of TRBs prepared.
+ */
+static int dwc3_prepare_last_sg(struct dwc3_ep *dep,
+ struct dwc3_request *req, unsigned int entry_length,
+ unsigned int node)
+{
+ unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+ unsigned int rem = req->request.length % maxp;
+ unsigned int num_trbs = 1;
+
+ if (dwc3_needs_extra_trb(dep, req))
+ num_trbs++;
+
+ if (dwc3_calc_trbs_left(dep) < num_trbs)
+ return 0;
+
+ req->needs_extra_trb = num_trbs > 1;
+
+ /* Prepare a normal TRB */
+ if (req->direction || req->request.length)
+ dwc3_prepare_one_trb(dep, req, entry_length,
+ req->needs_extra_trb, node, false, false);
+
+ /* Prepare extra TRBs for ZLP and MPS OUT transfer alignment */
+ if ((!req->direction && !req->request.length) || req->needs_extra_trb)
+ dwc3_prepare_one_trb(dep, req,
+ req->direction ? 0 : maxp - rem,
+ false, 1, true, false);
+
+ return num_trbs;
+}
+
+static int dwc3_prepare_trbs_sg(struct dwc3_ep *dep,
struct dwc3_request *req)
{
struct scatterlist *sg = req->start_sg;
@@ -1097,6 +1157,8 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
unsigned int length = req->request.length;
unsigned int remaining = req->request.num_mapped_sgs
- req->num_queued_sgs;
+ unsigned int num_trbs = req->num_trbs;
+ bool needs_extra_trb = dwc3_needs_extra_trb(dep, req);
/*
* If we resume preparing the request, then get the remaining length of
@@ -1106,10 +1168,10 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
length -= sg_dma_len(s);
for_each_sg(sg, s, remaining, i) {
- unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
- unsigned int rem = length % maxp;
+ unsigned int num_trbs_left = dwc3_calc_trbs_left(dep);
unsigned int trb_length;
- unsigned chain = true;
+ bool must_interrupt = false;
+ bool last_sg = false;
trb_length = min_t(unsigned int, length, sg_dma_len(s));
@@ -1123,59 +1185,28 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
* mapped sg.
*/
if ((i == remaining - 1) || !length)
- chain = false;
-
- if (rem && usb_endpoint_dir_out(dep->endpoint.desc) && !chain) {
- struct dwc3 *dwc = dep->dwc;
- struct dwc3_trb *trb;
-
- req->needs_extra_trb = true;
-
- /* prepare normal TRB */
- dwc3_prepare_one_trb(dep, req, trb_length, true, i);
-
- /* Now prepare one extra TRB to align transfer size */
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr,
- maxp - rem, false, 1,
- req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
- } else if (req->request.zero && req->request.length &&
- !usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- !rem && !chain) {
- struct dwc3 *dwc = dep->dwc;
- struct dwc3_trb *trb;
-
- req->needs_extra_trb = true;
-
- /* Prepare normal TRB */
- dwc3_prepare_one_trb(dep, req, trb_length, true, i);
-
- /* Prepare one extra TRB to handle ZLP */
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0,
- !req->direction, 1,
- req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
-
- /* Prepare one more TRB to handle MPS alignment */
- if (!req->direction) {
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp,
- false, 1, req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
- }
+ last_sg = true;
+
+ if (!num_trbs_left)
+ break;
+
+ if (last_sg) {
+ if (!dwc3_prepare_last_sg(dep, req, trb_length, i))
+ break;
} else {
- dwc3_prepare_one_trb(dep, req, trb_length, chain, i);
+ /*
+ * Look ahead to check if we have enough TRBs for the
+ * next SG entry. If not, set interrupt on this TRB to
+ * resume preparing the next SG entry when more TRBs are
+ * free.
+ */
+ if (num_trbs_left == 1 || (needs_extra_trb &&
+ num_trbs_left <= 2 &&
+ sg_dma_len(sg_next(s)) >= length))
+ must_interrupt = true;
+
+ dwc3_prepare_one_trb(dep, req, trb_length, 1, i, false,
+ must_interrupt);
}
/*
@@ -1185,7 +1216,7 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
* we have free trbs we can continue queuing from where we
* previously stopped
*/
- if (chain)
+ if (!last_sg)
req->start_sg = sg_next(s);
req->num_queued_sgs++;
@@ -1200,68 +1231,17 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
break;
}
- if (!dwc3_calc_trbs_left(dep))
+ if (must_interrupt)
break;
}
+
+ return req->num_trbs - num_trbs;
}
-static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
+static int dwc3_prepare_trbs_linear(struct dwc3_ep *dep,
struct dwc3_request *req)
{
- unsigned int length = req->request.length;
- unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
- unsigned int rem = length % maxp;
-
- if ((!length || rem) && usb_endpoint_dir_out(dep->endpoint.desc)) {
- struct dwc3 *dwc = dep->dwc;
- struct dwc3_trb *trb;
-
- req->needs_extra_trb = true;
-
- /* prepare normal TRB */
- dwc3_prepare_one_trb(dep, req, length, true, 0);
-
- /* Now prepare one extra TRB to align transfer size */
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem,
- false, 1, req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
- } else if (req->request.zero && req->request.length &&
- !usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- (IS_ALIGNED(req->request.length, maxp))) {
- struct dwc3 *dwc = dep->dwc;
- struct dwc3_trb *trb;
-
- req->needs_extra_trb = true;
-
- /* prepare normal TRB */
- dwc3_prepare_one_trb(dep, req, length, true, 0);
-
- /* Prepare one extra TRB to handle ZLP */
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0,
- !req->direction, 1, req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
-
- /* Prepare one more TRB to handle MPS alignment for OUT */
- if (!req->direction) {
- trb = &dep->trb_pool[dep->trb_enqueue];
- req->num_trbs++;
- __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp,
- false, 1, req->request.stream_id,
- req->request.short_not_ok,
- req->request.no_interrupt,
- req->request.is_last);
- }
- } else {
- dwc3_prepare_one_trb(dep, req, length, false, 0);
- }
+ return dwc3_prepare_last_sg(dep, req, req->request.length, 0);
}
/*
@@ -1271,10 +1251,13 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
* The function goes through the requests list and sets up TRBs for the
* transfers. The function returns once there are no more TRBs available or
* it runs out of requests.
+ *
+ * Returns the number of TRBs prepared or negative errno.
*/
-static void dwc3_prepare_trbs(struct dwc3_ep *dep)
+static int dwc3_prepare_trbs(struct dwc3_ep *dep)
{
struct dwc3_request *req, *n;
+ int ret = 0;
BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
@@ -1289,11 +1272,14 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)
* break things.
*/
list_for_each_entry(req, &dep->started_list, list) {
- if (req->num_pending_sgs > 0)
- dwc3_prepare_one_trb_sg(dep, req);
+ if (req->num_pending_sgs > 0) {
+ ret = dwc3_prepare_trbs_sg(dep, req);
+ if (!ret || req->num_pending_sgs)
+ return ret;
+ }
if (!dwc3_calc_trbs_left(dep))
- return;
+ return ret;
/*
* Don't prepare beyond a transfer. In DWC_usb32, its transfer
@@ -1301,30 +1287,32 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)
* active transfer instead of stopping.
*/
if (dep->stream_capable && req->request.is_last)
- return;
+ return ret;
}
list_for_each_entry_safe(req, n, &dep->pending_list, list) {
struct dwc3 *dwc = dep->dwc;
- int ret;
ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request,
dep->direction);
if (ret)
- return;
+ return ret;
req->sg = req->request.sg;
req->start_sg = req->sg;
req->num_queued_sgs = 0;
req->num_pending_sgs = req->request.num_mapped_sgs;
- if (req->num_pending_sgs > 0)
- dwc3_prepare_one_trb_sg(dep, req);
- else
- dwc3_prepare_one_trb_linear(dep, req);
+ if (req->num_pending_sgs > 0) {
+ ret = dwc3_prepare_trbs_sg(dep, req);
+ if (req->num_pending_sgs)
+ return ret;
+ } else {
+ ret = dwc3_prepare_trbs_linear(dep, req);
+ }
- if (!dwc3_calc_trbs_left(dep))
- return;
+ if (!ret || !dwc3_calc_trbs_left(dep))
+ return ret;
/*
* Don't prepare beyond a transfer. In DWC_usb32, its transfer
@@ -1332,8 +1320,10 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep)
* active transfer instead of stopping.
*/
if (dep->stream_capable && req->request.is_last)
- return;
+ return ret;
}
+
+ return ret;
}
static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep);
@@ -1346,12 +1336,24 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep)
int ret;
u32 cmd;
- if (!dwc3_calc_trbs_left(dep))
- return 0;
+ /*
+ * Note that it's normal to have no new TRBs prepared (i.e. ret == 0).
+ * This happens when we need to stop and restart a transfer such as in
+ * the case of reinitiating a stream or retrying an isoc transfer.
+ */
+ ret = dwc3_prepare_trbs(dep);
+ if (ret < 0)
+ return ret;
starting = !(dep->flags & DWC3_EP_TRANSFER_STARTED);
- dwc3_prepare_trbs(dep);
+ /*
+ * If there's no new TRB prepared and we don't need to restart a
+ * transfer, there's no need to update the transfer.
+ */
+ if (!ret && !starting)
+ return ret;
+
req = next_request(&dep->started_list);
if (!req) {
dep->flags |= DWC3_EP_PENDING_REQUEST;
@@ -1539,12 +1541,12 @@ static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep)
if (!dwc->dis_start_transfer_quirk &&
(DWC3_VER_IS_PRIOR(DWC31, 170A) ||
DWC3_VER_TYPE_IS_WITHIN(DWC31, 170A, EA01, EA06))) {
- if (dwc->gadget.speed <= USB_SPEED_HIGH && dep->direction)
+ if (dwc->gadget->speed <= USB_SPEED_HIGH && dep->direction)
return dwc3_gadget_start_isoc_quirk(dep);
}
if (desc->bInterval <= 14 &&
- dwc->gadget.speed >= USB_SPEED_HIGH) {
+ dwc->gadget->speed >= USB_SPEED_HIGH) {
u32 frame = __dwc3_gadget_get_frame(dwc);
bool rollover = frame <
(dep->frame_number & DWC3_FRNUMBER_MASK);
@@ -1600,7 +1602,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
{
struct dwc3 *dwc = dep->dwc;
- if (!dep->endpoint.desc) {
+ if (!dep->endpoint.desc || !dwc->pullups_connected) {
dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
dep->name);
return -ESHUTDOWN;
@@ -1628,8 +1630,13 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
if (dep->flags & DWC3_EP_WAIT_TRANSFER_COMPLETE)
return 0;
- /* Start the transfer only after the END_TRANSFER is completed */
- if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) {
+ /*
+ * Start the transfer only after the END_TRANSFER is completed
+ * and endpoint STALL is cleared.
+ */
+ if ((dep->flags & DWC3_EP_END_TRANSFER_PENDING) ||
+ (dep->flags & DWC3_EP_WEDGE) ||
+ (dep->flags & DWC3_EP_STALL)) {
dep->flags |= DWC3_EP_DELAY_START;
return 0;
}
@@ -1648,9 +1655,8 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
return 0;
if ((dep->flags & DWC3_EP_PENDING_REQUEST)) {
- if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) {
+ if (!(dep->flags & DWC3_EP_TRANSFER_STARTED))
return __dwc3_gadget_start_isoc(dep);
- }
}
}
@@ -1788,8 +1794,8 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
if (value) {
struct dwc3_trb *trb;
- unsigned transfer_in_flight;
- unsigned started;
+ unsigned int transfer_in_flight;
+ unsigned int started;
if (dep->number > 1)
trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
@@ -1822,6 +1828,18 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
return 0;
}
+ dwc3_stop_active_transfer(dep, true, true);
+
+ list_for_each_entry_safe(req, tmp, &dep->started_list, list)
+ dwc3_gadget_move_cancelled_request(req);
+
+ if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) {
+ dep->flags |= DWC3_EP_PENDING_CLEAR_STALL;
+ return 0;
+ }
+
+ dwc3_gadget_ep_cleanup_cancelled_requests(dep);
+
ret = dwc3_send_clear_stall_ep_cmd(dep);
if (ret) {
dev_err(dwc->dev, "failed to clear STALL on %s\n",
@@ -1831,18 +1849,11 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
- dwc3_stop_active_transfer(dep, true, true);
-
- list_for_each_entry_safe(req, tmp, &dep->started_list, list)
- dwc3_gadget_move_cancelled_request(req);
-
- list_for_each_entry_safe(req, tmp, &dep->pending_list, list)
- dwc3_gadget_move_cancelled_request(req);
+ if ((dep->flags & DWC3_EP_DELAY_START) &&
+ !usb_endpoint_xfer_isoc(dep->endpoint.desc))
+ __dwc3_gadget_kick_transfer(dep);
- if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) {
- dep->flags &= ~DWC3_EP_DELAY_START;
- dwc3_gadget_ep_cleanup_cancelled_requests(dep);
- }
+ dep->flags &= ~DWC3_EP_DELAY_START;
}
return ret;
@@ -2010,6 +2021,21 @@ static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
return 0;
}
+static void dwc3_stop_active_transfers(struct dwc3 *dwc)
+{
+ u32 epnum;
+
+ for (epnum = 2; epnum < dwc->num_eps; epnum++) {
+ struct dwc3_ep *dep;
+
+ dep = dwc->eps[epnum];
+ if (!dep)
+ continue;
+
+ dwc3_remove_requests(dwc, dep);
+ }
+}
+
static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
{
u32 reg;
@@ -2055,6 +2081,9 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
return 0;
}
+static void dwc3_gadget_disable_irq(struct dwc3 *dwc);
+static void __dwc3_gadget_stop(struct dwc3 *dwc);
+
static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
{
struct dwc3 *dwc = gadget_to_dwc(g);
@@ -2078,7 +2107,46 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
}
}
+ /*
+ * Synchronize any pending event handling before executing the controller
+ * halt routine.
+ */
+ if (!is_on) {
+ dwc3_gadget_disable_irq(dwc);
+ synchronize_irq(dwc->irq_gadget);
+ }
+
spin_lock_irqsave(&dwc->lock, flags);
+
+ if (!is_on) {
+ u32 count;
+
+ /*
+ * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a
+ * Section 4.1.8 Table 4-7, it states that for a device-initiated
+ * disconnect, the SW needs to ensure that it sends "a DEPENDXFER
+ * command for any active transfers" before clearing the RunStop
+ * bit.
+ */
+ dwc3_stop_active_transfers(dwc);
+ __dwc3_gadget_stop(dwc);
+
+ /*
+ * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a
+ * Section 1.3.4, it mentions that for the DEVCTRLHLT bit, the
+ * "software needs to acknowledge the events that are generated
+ * (by writing to GEVNTCOUNTn) while it is waiting for this bit
+ * to be set to '1'."
+ */
+ count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
+ count &= DWC3_GEVNTCOUNT_MASK;
+ if (count > 0) {
+ dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count);
+ dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) %
+ dwc->ev_buf->length;
+ }
+ }
+
ret = dwc3_gadget_run_stop(dwc, is_on, false);
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -2244,7 +2312,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
spin_lock_irqsave(&dwc->lock, flags);
if (dwc->gadget_driver) {
dev_err(dwc->dev, "%s is already bound to %s\n",
- dwc->gadget.name,
+ dwc->gadget->name,
dwc->gadget_driver->driver.name);
ret = -EBUSY;
goto err1;
@@ -2416,7 +2484,7 @@ static int dwc3_gadget_init_control_endpoint(struct dwc3_ep *dep)
dep->endpoint.maxburst = 1;
dep->endpoint.ops = &dwc3_gadget_ep0_ops;
if (!dep->direction)
- dwc->gadget.ep0 = &dep->endpoint;
+ dwc->gadget->ep0 = &dep->endpoint;
dep->endpoint.caps.type_control = true;
@@ -2459,10 +2527,10 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
usb_ep_set_maxpacket_limit(&dep->endpoint, size);
- dep->endpoint.max_streams = 15;
+ dep->endpoint.max_streams = 16;
dep->endpoint.ops = &dwc3_gadget_ep_ops;
list_add_tail(&dep->endpoint.ep_list,
- &dwc->gadget.ep_list);
+ &dwc->gadget->ep_list);
dep->endpoint.caps.type_iso = true;
dep->endpoint.caps.type_bulk = true;
dep->endpoint.caps.type_int = true;
@@ -2508,10 +2576,10 @@ static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep)
size /= 3;
usb_ep_set_maxpacket_limit(&dep->endpoint, size);
- dep->endpoint.max_streams = 15;
+ dep->endpoint.max_streams = 16;
dep->endpoint.ops = &dwc3_gadget_ep_ops;
list_add_tail(&dep->endpoint.ep_list,
- &dwc->gadget.ep_list);
+ &dwc->gadget->ep_list);
dep->endpoint.caps.type_iso = true;
dep->endpoint.caps.type_bulk = true;
dep->endpoint.caps.type_int = true;
@@ -2572,7 +2640,7 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc, u8 total)
{
u8 epnum;
- INIT_LIST_HEAD(&dwc->gadget.ep_list);
+ INIT_LIST_HEAD(&dwc->gadget->ep_list);
for (epnum = 0; epnum < total; epnum++) {
int ret;
@@ -2652,12 +2720,12 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
}
/*
- * If we're dealing with unaligned size OUT transfer, we will be left
- * with one TRB pending in the ring. We need to manually clear HWO bit
- * from that TRB.
+ * We use bounce buffer for requests that needs extra TRB or OUT ZLP. If
+ * this TRB points to the bounce buffer address, it's a MPS alignment
+ * TRB. Don't add it to req->remaining calculation.
*/
-
- if (req->needs_extra_trb && !(trb->ctrl & DWC3_TRB_CTRL_CHN)) {
+ if (trb->bpl == lower_32_bits(dep->dwc->bounce_addr) &&
+ trb->bph == upper_32_bits(dep->dwc->bounce_addr)) {
trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
return 1;
}
@@ -2732,26 +2800,17 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event,
status);
- if (req->needs_extra_trb) {
- unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+ req->request.actual = req->request.length - req->remaining;
+
+ if (!dwc3_gadget_ep_request_completed(req))
+ goto out;
+ if (req->needs_extra_trb) {
ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event,
status);
-
- /* Reclaim MPS padding TRB for ZLP */
- if (!req->direction && req->request.zero && req->request.length &&
- !usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- (IS_ALIGNED(req->request.length, maxp)))
- ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status);
-
req->needs_extra_trb = false;
}
- req->request.actual = req->request.length - req->remaining;
-
- if (!dwc3_gadget_ep_request_completed(req))
- goto out;
-
dwc3_gadget_giveback(dep, req, status);
out:
@@ -2896,6 +2955,43 @@ static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep,
(void) __dwc3_gadget_start_isoc(dep);
}
+static void dwc3_gadget_endpoint_command_complete(struct dwc3_ep *dep,
+ const struct dwc3_event_depevt *event)
+{
+ u8 cmd = DEPEVT_PARAMETER_CMD(event->parameters);
+
+ if (cmd != DWC3_DEPCMD_ENDTRANSFER)
+ return;
+
+ dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
+ dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
+ dwc3_gadget_ep_cleanup_cancelled_requests(dep);
+
+ if (dep->flags & DWC3_EP_PENDING_CLEAR_STALL) {
+ struct dwc3 *dwc = dep->dwc;
+
+ dep->flags &= ~DWC3_EP_PENDING_CLEAR_STALL;
+ if (dwc3_send_clear_stall_ep_cmd(dep)) {
+ struct usb_ep *ep0 = &dwc->eps[0]->endpoint;
+
+ dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name);
+ if (dwc->delayed_status)
+ __dwc3_gadget_ep0_set_halt(ep0, 1);
+ return;
+ }
+
+ dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
+ if (dwc->delayed_status)
+ dwc3_ep0_send_delayed_status(dwc);
+ }
+
+ if ((dep->flags & DWC3_EP_DELAY_START) &&
+ !usb_endpoint_xfer_isoc(dep->endpoint.desc))
+ __dwc3_gadget_kick_transfer(dep);
+
+ dep->flags &= ~DWC3_EP_DELAY_START;
+}
+
static void dwc3_gadget_endpoint_stream_event(struct dwc3_ep *dep,
const struct dwc3_event_depevt *event)
{
@@ -2965,7 +3061,6 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
{
struct dwc3_ep *dep;
u8 epnum = event->endpoint_number;
- u8 cmd;
dep = dwc->eps[epnum];
@@ -2991,18 +3086,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
dwc3_gadget_endpoint_transfer_not_ready(dep, event);
break;
case DWC3_DEPEVT_EPCMDCMPLT:
- cmd = DEPEVT_PARAMETER_CMD(event->parameters);
-
- if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
- dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
- dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
- dwc3_gadget_ep_cleanup_cancelled_requests(dep);
- if ((dep->flags & DWC3_EP_DELAY_START) &&
- !usb_endpoint_xfer_isoc(dep->endpoint.desc))
- __dwc3_gadget_kick_transfer(dep);
-
- dep->flags &= ~DWC3_EP_DELAY_START;
- }
+ dwc3_gadget_endpoint_command_complete(dep, event);
break;
case DWC3_DEPEVT_XFERCOMPLETE:
dwc3_gadget_endpoint_transfer_complete(dep, event);
@@ -3019,7 +3103,7 @@ static void dwc3_disconnect_gadget(struct dwc3 *dwc)
{
if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
spin_unlock(&dwc->lock);
- dwc->gadget_driver->disconnect(&dwc->gadget);
+ dwc->gadget_driver->disconnect(dwc->gadget);
spin_lock(&dwc->lock);
}
}
@@ -3028,7 +3112,7 @@ static void dwc3_suspend_gadget(struct dwc3 *dwc)
{
if (dwc->gadget_driver && dwc->gadget_driver->suspend) {
spin_unlock(&dwc->lock);
- dwc->gadget_driver->suspend(&dwc->gadget);
+ dwc->gadget_driver->suspend(dwc->gadget);
spin_lock(&dwc->lock);
}
}
@@ -3037,7 +3121,7 @@ static void dwc3_resume_gadget(struct dwc3 *dwc)
{
if (dwc->gadget_driver && dwc->gadget_driver->resume) {
spin_unlock(&dwc->lock);
- dwc->gadget_driver->resume(&dwc->gadget);
+ dwc->gadget_driver->resume(dwc->gadget);
spin_lock(&dwc->lock);
}
}
@@ -3047,9 +3131,9 @@ static void dwc3_reset_gadget(struct dwc3 *dwc)
if (!dwc->gadget_driver)
return;
- if (dwc->gadget.speed != USB_SPEED_UNKNOWN) {
+ if (dwc->gadget->speed != USB_SPEED_UNKNOWN) {
spin_unlock(&dwc->lock);
- usb_gadget_udc_reset(&dwc->gadget, dwc->gadget_driver);
+ usb_gadget_udc_reset(dwc->gadget, dwc->gadget_driver);
spin_lock(&dwc->lock);
}
}
@@ -3150,9 +3234,9 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
dwc3_disconnect_gadget(dwc);
- dwc->gadget.speed = USB_SPEED_UNKNOWN;
+ dwc->gadget->speed = USB_SPEED_UNKNOWN;
dwc->setup_packet_pending = false;
- usb_gadget_set_state(&dwc->gadget, USB_STATE_NOTATTACHED);
+ usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED);
dwc->connected = false;
}
@@ -3195,6 +3279,13 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
}
dwc3_reset_gadget(dwc);
+ /*
+ * In the Synopsis DesignWare Cores USB3 Databook Rev. 3.30a
+ * Section 4.1.2 Table 4-2, it states that during a USB reset, the SW
+ * needs to ensure that it sends "a DEPENDXFER command for any active
+ * transfers."
+ */
+ dwc3_stop_active_transfers(dwc);
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg &= ~DWC3_DCTL_TSTCTRL_MASK;
@@ -3231,8 +3322,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
switch (speed) {
case DWC3_DSTS_SUPERSPEED_PLUS:
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
- dwc->gadget.ep0->maxpacket = 512;
- dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
+ dwc->gadget->ep0->maxpacket = 512;
+ dwc->gadget->speed = USB_SPEED_SUPER_PLUS;
break;
case DWC3_DSTS_SUPERSPEED:
/*
@@ -3252,27 +3343,27 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
dwc3_gadget_reset_interrupt(dwc);
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
- dwc->gadget.ep0->maxpacket = 512;
- dwc->gadget.speed = USB_SPEED_SUPER;
+ dwc->gadget->ep0->maxpacket = 512;
+ dwc->gadget->speed = USB_SPEED_SUPER;
break;
case DWC3_DSTS_HIGHSPEED:
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
- dwc->gadget.ep0->maxpacket = 64;
- dwc->gadget.speed = USB_SPEED_HIGH;
+ dwc->gadget->ep0->maxpacket = 64;
+ dwc->gadget->speed = USB_SPEED_HIGH;
break;
case DWC3_DSTS_FULLSPEED:
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
- dwc->gadget.ep0->maxpacket = 64;
- dwc->gadget.speed = USB_SPEED_FULL;
+ dwc->gadget->ep0->maxpacket = 64;
+ dwc->gadget->speed = USB_SPEED_FULL;
break;
case DWC3_DSTS_LOWSPEED:
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
- dwc->gadget.ep0->maxpacket = 8;
- dwc->gadget.speed = USB_SPEED_LOW;
+ dwc->gadget->ep0->maxpacket = 8;
+ dwc->gadget->speed = USB_SPEED_LOW;
break;
}
- dwc->eps[1]->endpoint.maxpacket = dwc->gadget.ep0->maxpacket;
+ dwc->eps[1]->endpoint.maxpacket = dwc->gadget->ep0->maxpacket;
/* Enable USB2 LPM Capability */
@@ -3340,7 +3431,7 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
if (dwc->gadget_driver && dwc->gadget_driver->resume) {
spin_unlock(&dwc->lock);
- dwc->gadget_driver->resume(&dwc->gadget);
+ dwc->gadget_driver->resume(dwc->gadget);
spin_lock(&dwc->lock);
}
}
@@ -3511,7 +3602,7 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
* Ignore suspend event until the gadget enters into
* USB_STATE_CONFIGURED state.
*/
- if (dwc->gadget.state >= USB_STATE_CONFIGURED)
+ if (dwc->gadget->state >= USB_STATE_CONFIGURED)
dwc3_gadget_suspend_interrupt(dwc,
event->event_info);
}
@@ -3686,6 +3777,13 @@ out:
return irq;
}
+static void dwc_gadget_release(struct device *dev)
+{
+ struct usb_gadget *gadget = container_of(dev, struct usb_gadget, dev);
+
+ kfree(gadget);
+}
+
/**
* dwc3_gadget_init - initializes gadget related registers
* @dwc: pointer to our controller context structure
@@ -3696,6 +3794,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
{
int ret;
int irq;
+ struct device *dev;
irq = dwc3_gadget_get_irq(dwc);
if (irq < 0) {
@@ -3728,12 +3827,21 @@ int dwc3_gadget_init(struct dwc3 *dwc)
}
init_completion(&dwc->ep0_in_setup);
+ dwc->gadget = kzalloc(sizeof(struct usb_gadget), GFP_KERNEL);
+ if (!dwc->gadget) {
+ ret = -ENOMEM;
+ goto err3;
+ }
- dwc->gadget.ops = &dwc3_gadget_ops;
- dwc->gadget.speed = USB_SPEED_UNKNOWN;
- dwc->gadget.sg_supported = true;
- dwc->gadget.name = "dwc3-gadget";
- dwc->gadget.lpm_capable = true;
+
+ usb_initialize_gadget(dwc->dev, dwc->gadget, dwc_gadget_release);
+ dev = &dwc->gadget->dev;
+ dev->platform_data = dwc;
+ dwc->gadget->ops = &dwc3_gadget_ops;
+ dwc->gadget->speed = USB_SPEED_UNKNOWN;
+ dwc->gadget->sg_supported = true;
+ dwc->gadget->name = "dwc3-gadget";
+ dwc->gadget->lpm_capable = true;
/*
* FIXME We might be setting max_speed to <SUPER, however versions
@@ -3756,7 +3864,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
dev_info(dwc->dev, "changing max_speed on rev %08x\n",
dwc->revision);
- dwc->gadget.max_speed = dwc->maximum_speed;
+ dwc->gadget->max_speed = dwc->maximum_speed;
/*
* REVISIT: Here we should clear all pending IRQs to be
@@ -3765,21 +3873,22 @@ int dwc3_gadget_init(struct dwc3 *dwc)
ret = dwc3_gadget_init_endpoints(dwc, dwc->num_eps);
if (ret)
- goto err3;
+ goto err4;
- ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
+ ret = usb_add_gadget(dwc->gadget);
if (ret) {
- dev_err(dwc->dev, "failed to register udc\n");
- goto err4;
+ dev_err(dwc->dev, "failed to add gadget\n");
+ goto err5;
}
- dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
+ dwc3_gadget_set_speed(dwc->gadget, dwc->maximum_speed);
return 0;
-err4:
+err5:
dwc3_gadget_free_endpoints(dwc);
-
+err4:
+ usb_put_gadget(dwc->gadget);
err3:
dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
dwc->bounce_addr);
@@ -3799,7 +3908,7 @@ err0:
void dwc3_gadget_exit(struct dwc3 *dwc)
{
- usb_del_gadget_udc(&dwc->gadget);
+ usb_del_gadget_udc(dwc->gadget);
dwc3_gadget_free_endpoints(dwc);
dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
dwc->bounce_addr);
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index bd85eb7fa9ef..0cd281949970 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -17,7 +17,7 @@
struct dwc3;
#define to_dwc3_ep(ep) (container_of(ep, struct dwc3_ep, endpoint))
-#define gadget_to_dwc(g) (container_of(g, struct dwc3, gadget))
+#define gadget_to_dwc(g) (dev_get_platdata(&g->dev))
/* DEPCFG parameter 1 */
#define DWC3_DEPCFG_INT_NUM(n) (((n) & 0x1f) << 0)
@@ -113,6 +113,7 @@ int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
gfp_t gfp_flags);
int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
+void dwc3_ep0_send_delayed_status(struct dwc3 *dwc);
/**
* dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h
index da1be01637c8..97f4f1125a41 100644
--- a/drivers/usb/dwc3/trace.h
+++ b/drivers/usb/dwc3/trace.h
@@ -104,8 +104,8 @@ DECLARE_EVENT_CLASS(dwc3_log_request,
TP_STRUCT__entry(
__string(name, req->dep->name)
__field(struct dwc3_request *, req)
- __field(unsigned, actual)
- __field(unsigned, length)
+ __field(unsigned int, actual)
+ __field(unsigned int, length)
__field(int, status)
__field(int, zero)
__field(int, short_not_ok)
@@ -246,6 +246,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
__entry->dequeue, __entry->bph, __entry->bpl,
({char *s;
int pcm = ((__entry->size >> 24) & 3) + 1;
+
switch (__entry->type) {
case USB_ENDPOINT_XFER_INT:
case USB_ENDPOINT_XFER_ISOC:
@@ -291,12 +292,12 @@ DECLARE_EVENT_CLASS(dwc3_log_ep,
TP_ARGS(dep),
TP_STRUCT__entry(
__string(name, dep->name)
- __field(unsigned, maxpacket)
- __field(unsigned, maxpacket_limit)
- __field(unsigned, max_streams)
- __field(unsigned, maxburst)
- __field(unsigned, flags)
- __field(unsigned, direction)
+ __field(unsigned int, maxpacket)
+ __field(unsigned int, maxpacket_limit)
+ __field(unsigned int, max_streams)
+ __field(unsigned int, maxburst)
+ __field(unsigned int, flags)
+ __field(unsigned int, direction)
__field(u8, trb_enqueue)
__field(u8, trb_dequeue)
),
diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c
index e6e6176386a4..aa213c9815f6 100644
--- a/drivers/usb/dwc3/ulpi.c
+++ b/drivers/usb/dwc3/ulpi.c
@@ -19,7 +19,7 @@
static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
{
- unsigned count = 1000;
+ unsigned int count = 1000;
u32 reg;
while (count--) {
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index b075dbfad730..45b42d8f6453 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -15,6 +15,7 @@
#include <linux/console.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/iopoll.h>
#include <linux/pci_regs.h>
#include <linux/pci_ids.h>
#include <linux/usb/ch9.h>
@@ -161,17 +162,11 @@ static inline u32 dbgp_pid_read_update(u32 x, u32 tok)
static int dbgp_wait_until_complete(void)
{
u32 ctrl;
- int loop = DBGP_TIMEOUT;
-
- do {
- ctrl = readl(&ehci_debug->control);
- /* Stop when the transaction is finished */
- if (ctrl & DBGP_DONE)
- break;
- udelay(1);
- } while (--loop > 0);
+ int ret;
- if (!loop)
+ ret = readl_poll_timeout_atomic(&ehci_debug->control, ctrl,
+ (ctrl & DBGP_DONE), 1, DBGP_TIMEOUT);
+ if (ret)
return -DBGP_TIMEOUT;
/*
diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index c0507767a8e3..be4ecbabdd58 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -14,6 +14,7 @@
#include <linux/pci_ids.h>
#include <linux/memblock.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <asm/pci-direct.h>
#include <asm/fixmap.h>
#include <linux/bcd.h>
@@ -135,16 +136,9 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, int wait, int delay)
{
u32 result;
- do {
- result = readl(ptr);
- result &= mask;
- if (result == done)
- return 0;
- udelay(delay);
- wait -= delay;
- } while (wait > 0);
-
- return -ETIMEDOUT;
+ return readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done),
+ delay, wait);
}
static void __init xdbc_bios_handoff(void)
diff --git a/drivers/usb/gadget/function/f_acm.c b/drivers/usb/gadget/function/f_acm.c
index 200596ea9557..46647bfac2ef 100644
--- a/drivers/usb/gadget/function/f_acm.c
+++ b/drivers/usb/gadget/function/f_acm.c
@@ -425,9 +425,11 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
/* we know alt == 0, so this is an activation or a reset */
if (intf == acm->ctrl_id) {
- dev_vdbg(&cdev->gadget->dev,
- "reset acm control interface %d\n", intf);
- usb_ep_disable(acm->notify);
+ if (acm->notify->enabled) {
+ dev_vdbg(&cdev->gadget->dev,
+ "reset acm control interface %d\n", intf);
+ usb_ep_disable(acm->notify);
+ }
if (!acm->notify->desc)
if (config_ep_by_speed(cdev->gadget, f, acm->notify))
diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
index 46af0aa07e2e..85cb15734aa8 100644
--- a/drivers/usb/gadget/function/f_midi.c
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -698,9 +698,9 @@ drop_out:
f_midi_drop_out_substreams(midi);
}
-static void f_midi_in_tasklet(unsigned long data)
+static void f_midi_in_tasklet(struct tasklet_struct *t)
{
- struct f_midi *midi = (struct f_midi *) data;
+ struct f_midi *midi = from_tasklet(midi, t, tasklet);
f_midi_transmit(midi);
}
@@ -875,7 +875,7 @@ static int f_midi_bind(struct usb_configuration *c, struct usb_function *f)
int status, n, jack = 1, i = 0, endpoint_descriptor_index = 0;
midi->gadget = cdev->gadget;
- tasklet_init(&midi->tasklet, f_midi_in_tasklet, (unsigned long) midi);
+ tasklet_setup(&midi->tasklet, f_midi_in_tasklet);
status = f_midi_register_card(midi);
if (status < 0)
goto fail_register;
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index 1f638759a953..019bea8e09cc 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -85,8 +85,10 @@ static inline struct f_ncm *func_to_ncm(struct usb_function *f)
/* peak (theoretical) bulk transfer rate in bits-per-second */
static inline unsigned ncm_bitrate(struct usb_gadget *g)
{
- if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
- return 13 * 1024 * 8 * 1000 * 8;
+ if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER_PLUS)
+ return 4250000000U;
+ else if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+ return 3750000000U;
else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
return 13 * 512 * 8 * 1000 * 8;
else
@@ -376,7 +378,7 @@ static struct usb_ss_ep_comp_descriptor ss_ncm_bulk_comp_desc = {
.bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
/* the following 2 values can be tweaked if necessary */
- /* .bMaxBurst = 0, */
+ .bMaxBurst = 15,
/* .bmAttributes = 0, */
};
@@ -1534,7 +1536,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
fs_ncm_notify_desc.bEndpointAddress;
status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function,
- ncm_ss_function, NULL);
+ ncm_ss_function, ncm_ss_function);
if (status)
goto fail;
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 68697f596066..64a4112068fc 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -31,6 +31,7 @@
#include <linux/types.h>
#include <linux/ctype.h>
#include <linux/cdev.h>
+#include <linux/kref.h>
#include <asm/byteorder.h>
#include <linux/io.h>
@@ -64,7 +65,7 @@ struct printer_dev {
struct usb_gadget *gadget;
s8 interface;
struct usb_ep *in_ep, *out_ep;
-
+ struct kref kref;
struct list_head rx_reqs; /* List of free RX structs */
struct list_head rx_reqs_active; /* List of Active RX xfers */
struct list_head rx_buffers; /* List of completed xfers */
@@ -218,6 +219,13 @@ static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
/*-------------------------------------------------------------------------*/
+static void printer_dev_free(struct kref *kref)
+{
+ struct printer_dev *dev = container_of(kref, struct printer_dev, kref);
+
+ kfree(dev);
+}
+
static struct usb_request *
printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
{
@@ -353,6 +361,7 @@ printer_open(struct inode *inode, struct file *fd)
spin_unlock_irqrestore(&dev->lock, flags);
+ kref_get(&dev->kref);
DBG(dev, "printer_open returned %x\n", ret);
return ret;
}
@@ -370,6 +379,7 @@ printer_close(struct inode *inode, struct file *fd)
dev->printer_status &= ~PRINTER_SELECTED;
spin_unlock_irqrestore(&dev->lock, flags);
+ kref_put(&dev->kref, printer_dev_free);
DBG(dev, "printer_close\n");
return 0;
@@ -1386,7 +1396,8 @@ static void gprinter_free(struct usb_function *f)
struct f_printer_opts *opts;
opts = container_of(f->fi, struct f_printer_opts, func_inst);
- kfree(dev);
+
+ kref_put(&dev->kref, printer_dev_free);
mutex_lock(&opts->lock);
--opts->refcnt;
mutex_unlock(&opts->lock);
@@ -1455,6 +1466,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
return ERR_PTR(-ENOMEM);
}
+ kref_init(&dev->kref);
++opts->refcnt;
dev->minor = opts->minor;
dev->pnp_string = opts->pnp_string;
diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c
index 184165e27908..410fa89eae8f 100644
--- a/drivers/usb/gadget/function/f_tcm.c
+++ b/drivers/usb/gadget/function/f_tcm.c
@@ -392,12 +392,12 @@ static void bot_set_alt(struct f_uas *fu)
fu->flags = USBG_IS_BOT;
- config_ep_by_speed(gadget, f, fu->ep_in);
+ config_ep_by_speed_and_alt(gadget, f, fu->ep_in, USB_G_ALT_INT_BBB);
ret = usb_ep_enable(fu->ep_in);
if (ret)
goto err_b_in;
- config_ep_by_speed(gadget, f, fu->ep_out);
+ config_ep_by_speed_and_alt(gadget, f, fu->ep_out, USB_G_ALT_INT_BBB);
ret = usb_ep_enable(fu->ep_out);
if (ret)
goto err_b_out;
@@ -852,21 +852,21 @@ static void uasp_set_alt(struct f_uas *fu)
if (gadget->speed >= USB_SPEED_SUPER)
fu->flags |= USBG_USE_STREAMS;
- config_ep_by_speed(gadget, f, fu->ep_in);
+ config_ep_by_speed_and_alt(gadget, f, fu->ep_in, USB_G_ALT_INT_UAS);
ret = usb_ep_enable(fu->ep_in);
if (ret)
goto err_b_in;
- config_ep_by_speed(gadget, f, fu->ep_out);
+ config_ep_by_speed_and_alt(gadget, f, fu->ep_out, USB_G_ALT_INT_UAS);
ret = usb_ep_enable(fu->ep_out);
if (ret)
goto err_b_out;
- config_ep_by_speed(gadget, f, fu->ep_cmd);
+ config_ep_by_speed_and_alt(gadget, f, fu->ep_cmd, USB_G_ALT_INT_UAS);
ret = usb_ep_enable(fu->ep_cmd);
if (ret)
goto err_cmd;
- config_ep_by_speed(gadget, f, fu->ep_status);
+ config_ep_by_speed_and_alt(gadget, f, fu->ep_status, USB_G_ALT_INT_UAS);
ret = usb_ep_enable(fu->ep_status);
if (ret)
goto err_status;
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index 0b9712616455..44b4352a2676 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -740,20 +740,20 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
/* Initialise video. */
ret = uvcg_video_init(&uvc->video, uvc);
if (ret < 0)
- goto error;
+ goto v4l2_error;
/* Register a V4L2 device. */
ret = uvc_register_video(uvc);
if (ret < 0) {
uvcg_err(f, "failed to register video device\n");
- goto error;
+ goto v4l2_error;
}
return 0;
-error:
+v4l2_error:
v4l2_device_unregister(&uvc->v4l2_dev);
-
+error:
if (uvc->control_req)
usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
kfree(uvc->control_buf);
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index c3cc6bd14e61..31ea76adcc0d 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -93,7 +93,7 @@ struct eth_dev {
static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
{
if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
- gadget->speed == USB_SPEED_SUPER))
+ gadget->speed >= USB_SPEED_SUPER))
return qmult * DEFAULT_QLEN;
else
return DEFAULT_QLEN;
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 127ecc2b4317..2caccbb6e014 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -1391,6 +1391,7 @@ void gserial_disconnect(struct gserial *gser)
if (port->port.tty)
tty_hangup(port->port.tty);
}
+ port->suspended = false;
spin_unlock_irqrestore(&port->port_lock, flags);
/* disable endpoints, aborting down any active I/O */
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
index cdf96911e4b1..be7bb64e3594 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
@@ -135,13 +135,9 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
/* Handle device interrupts */
if (istat & vhub->port_irq_mask) {
- unsigned long bitmap = istat;
- int offset = VHUB_IRQ_DEV1_BIT;
- int size = VHUB_IRQ_DEV1_BIT + vhub->max_ports;
-
- for_each_set_bit_from(offset, &bitmap, size) {
- i = offset - VHUB_IRQ_DEV1_BIT;
- ast_vhub_dev_irq(&vhub->ports[i].dev);
+ for (i = 0; i < vhub->max_ports; i++) {
+ if (istat & VHUB_DEV_IRQ(i))
+ ast_vhub_dev_irq(&vhub->ports[i].dev);
}
}
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
index 2e5a1ef14a75..87a5dea12d3c 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
+++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
@@ -67,6 +67,9 @@
#define VHUB_IRQ_HUB_EP0_SETUP (1 << 0)
#define VHUB_IRQ_ACK_ALL 0x1ff
+/* Downstream device IRQ mask. */
+#define VHUB_DEV_IRQ(n) (VHUB_IRQ_DEVICE1 << (n))
+
/* SW reset reg */
#define VHUB_SW_RESET_EP_POOL (1 << 9)
#define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index a6426dd1cfef..2b893bceea45 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1056,16 +1056,19 @@ found_ep:
switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
+ ep->nr_banks = 1;
break;
case USB_ENDPOINT_XFER_ISOC:
ep->fifo_size = 1024;
- ep->nr_banks = 2;
+ if (ep->udc->ep_prealloc)
+ ep->nr_banks = 2;
break;
case USB_ENDPOINT_XFER_BULK:
ep->fifo_size = 512;
- ep->nr_banks = 1;
+ if (ep->udc->ep_prealloc)
+ ep->nr_banks = 1;
break;
case USB_ENDPOINT_XFER_INT:
@@ -1075,7 +1078,8 @@ found_ep:
else
ep->fifo_size =
roundup_pow_of_two(le16_to_cpu(desc->wMaxPacketSize));
- ep->nr_banks = 1;
+ if (ep->udc->ep_prealloc)
+ ep->nr_banks = 1;
break;
}
@@ -1091,8 +1095,6 @@ found_ep:
USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3);
ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks);
-
- ep->udc->configured_ep++;
}
return _ep;
@@ -1786,7 +1788,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
if (status & USBA_END_OF_RESET) {
struct usba_ep *ep0, *ep;
- int i, n;
+ int i;
usba_writel(udc, INT_CLR,
USBA_END_OF_RESET|USBA_END_OF_RESUME
@@ -1834,13 +1836,14 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
"ODD: EP0 configuration is invalid!\n");
/* Preallocate other endpoints */
- n = fifo_mode ? udc->num_ep : udc->configured_ep;
- for (i = 1; i < n; i++) {
+ for (i = 1; i < udc->num_ep; i++) {
ep = &udc->usba_ep[i];
- usba_ep_writel(ep, CFG, ep->ept_cfg);
- if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED))
- dev_err(&udc->pdev->dev,
- "ODD: EP%d configuration is invalid!\n", i);
+ if (ep->ep.claimed) {
+ usba_ep_writel(ep, CFG, ep->ept_cfg);
+ if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED))
+ dev_err(&udc->pdev->dev,
+ "ODD: EP%d configuration is invalid!\n", i);
+ }
}
}
@@ -2025,9 +2028,6 @@ static int atmel_usba_stop(struct usb_gadget *gadget)
if (udc->vbus_pin)
disable_irq(gpiod_to_irq(udc->vbus_pin));
- if (fifo_mode == 0)
- udc->configured_ep = 1;
-
udc->suspended = false;
usba_stop(udc);
@@ -2090,33 +2090,51 @@ static const struct usba_udc_config udc_at91sam9rl_cfg = {
.errata = &at91sam9rl_errata,
.config = ep_config_sam9,
.num_ep = ARRAY_SIZE(ep_config_sam9),
+ .ep_prealloc = true,
};
static const struct usba_udc_config udc_at91sam9g45_cfg = {
.errata = &at91sam9g45_errata,
.config = ep_config_sam9,
.num_ep = ARRAY_SIZE(ep_config_sam9),
+ .ep_prealloc = true,
};
static const struct usba_udc_config udc_sama5d3_cfg = {
.config = ep_config_sama5,
.num_ep = ARRAY_SIZE(ep_config_sama5),
+ .ep_prealloc = true,
+};
+
+static const struct usba_udc_config udc_sam9x60_cfg = {
+ .num_ep = ARRAY_SIZE(ep_config_sam9),
+ .config = ep_config_sam9,
+ .ep_prealloc = false,
};
static const struct of_device_id atmel_udc_dt_ids[] = {
{ .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg },
{ .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg },
{ .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg },
+ { .compatible = "microchip,sam9x60-udc", .data = &udc_sam9x60_cfg },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids);
+static const struct of_device_id atmel_pmc_dt_ids[] = {
+ { .compatible = "atmel,at91sam9g45-pmc" },
+ { .compatible = "atmel,at91sam9rl-pmc" },
+ { .compatible = "atmel,at91sam9x5-pmc" },
+ { /* sentinel */ }
+};
+
static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
struct usba_udc *udc)
{
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *match;
+ struct device_node *pp;
int i, ret;
struct usba_ep *eps, *ep;
const struct usba_udc_config *udc_config;
@@ -2126,14 +2144,19 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
return ERR_PTR(-EINVAL);
udc_config = match->data;
+ udc->ep_prealloc = udc_config->ep_prealloc;
udc->errata = udc_config->errata;
- udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc");
- if (IS_ERR(udc->pmc))
- udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9rl-pmc");
- if (IS_ERR(udc->pmc))
- udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9x5-pmc");
- if (udc->errata && IS_ERR(udc->pmc))
- return ERR_CAST(udc->pmc);
+ if (udc->errata) {
+ pp = of_find_matching_node_and_match(NULL, atmel_pmc_dt_ids,
+ NULL);
+ if (!pp)
+ return ERR_PTR(-ENODEV);
+
+ udc->pmc = syscon_node_to_regmap(pp);
+ of_node_put(pp);
+ if (IS_ERR(udc->pmc))
+ return ERR_CAST(udc->pmc);
+ }
udc->num_ep = 0;
@@ -2142,7 +2165,6 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
if (fifo_mode == 0) {
udc->num_ep = udc_config->num_ep;
- udc->configured_ep = 1;
} else {
udc->num_ep = usba_config_fifo_table(udc);
}
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h
index 48e332439ed5..620472f218bc 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.h
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.h
@@ -317,6 +317,7 @@ struct usba_udc_config {
const struct usba_udc_errata *errata;
const struct usba_ep_config *config;
const int num_ep;
+ const bool ep_prealloc;
};
struct usba_udc {
@@ -336,7 +337,6 @@ struct usba_udc {
int irq;
struct gpio_desc *vbus_pin;
int num_ep;
- int configured_ep;
struct usba_fifo_cfg *fifo_cfg;
struct clk *pclk;
struct clk *hclk;
@@ -344,6 +344,7 @@ struct usba_udc {
bool bias_pulse_needed;
bool clocked;
bool suspended;
+ bool ep_prealloc;
u16 devstatus;
diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c
index feaec00a3c16..9cd4a70ccdd6 100644
--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
@@ -26,6 +26,7 @@
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/timer.h>
+#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/workqueue.h>
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 5ff36525044e..0bef6b3f049b 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -484,7 +484,7 @@ static void bdc_phy_exit(struct bdc *bdc)
static int bdc_probe(struct platform_device *pdev)
{
struct bdc *bdc;
- int ret = -ENOMEM;
+ int ret;
int irq;
u32 temp;
struct device *dev = &pdev->dev;
@@ -510,10 +510,9 @@ static int bdc_probe(struct platform_device *pdev)
bdc->clk = clk;
bdc->regs = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(bdc->regs)) {
- dev_err(dev, "ioremap error\n");
- return -ENOMEM;
- }
+ if (IS_ERR(bdc->regs))
+ return PTR_ERR(bdc->regs);
+
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 4f82bcd31fd3..debf54205d22 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -715,6 +715,9 @@ int usb_gadget_disconnect(struct usb_gadget *gadget)
goto out;
}
+ if (!gadget->connected)
+ goto out;
+
if (gadget->deactivated) {
/*
* If gadget is deactivated we only save new state.
@@ -1164,21 +1167,18 @@ static int check_pending_gadget_drivers(struct usb_udc *udc)
}
/**
- * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
+ * usb_initialize_gadget - initialize a gadget and its embedded struct device
* @parent: the parent device to this udc. Usually the controller driver's
* device.
- * @gadget: the gadget to be added to the list.
+ * @gadget: the gadget to be initialized.
* @release: a gadget release function.
*
* Returns zero on success, negative errno otherwise.
* Calls the gadget release function in the latter case.
*/
-int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
+void usb_initialize_gadget(struct device *parent, struct usb_gadget *gadget,
void (*release)(struct device *dev))
{
- struct usb_udc *udc;
- int ret = -ENOMEM;
-
dev_set_name(&gadget->dev, "gadget");
INIT_WORK(&gadget->work, usb_gadget_state_work);
gadget->dev.parent = parent;
@@ -1189,17 +1189,32 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
gadget->dev.release = usb_udc_nop_release;
device_initialize(&gadget->dev);
+}
+EXPORT_SYMBOL_GPL(usb_initialize_gadget);
+
+/**
+ * usb_add_gadget - adds a new gadget to the udc class driver list
+ * @gadget: the gadget to be added to the list.
+ *
+ * Returns zero on success, negative errno otherwise.
+ * Does not do a final usb_put_gadget() if an error occurs.
+ */
+int usb_add_gadget(struct usb_gadget *gadget)
+{
+ struct usb_udc *udc;
+ int ret = -ENOMEM;
udc = kzalloc(sizeof(*udc), GFP_KERNEL);
if (!udc)
- goto err_put_gadget;
+ goto error;
device_initialize(&udc->dev);
udc->dev.release = usb_udc_release;
udc->dev.class = udc_class;
udc->dev.groups = usb_udc_attr_groups;
- udc->dev.parent = parent;
- ret = dev_set_name(&udc->dev, "%s", kobject_name(&parent->kobj));
+ udc->dev.parent = gadget->dev.parent;
+ ret = dev_set_name(&udc->dev, "%s",
+ kobject_name(&gadget->dev.parent->kobj));
if (ret)
goto err_put_udc;
@@ -1242,8 +1257,30 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
err_put_udc:
put_device(&udc->dev);
- err_put_gadget:
- put_device(&gadget->dev);
+ error:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(usb_add_gadget);
+
+/**
+ * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller driver's
+ * device.
+ * @gadget: the gadget to be added to the list.
+ * @release: a gadget release function.
+ *
+ * Returns zero on success, negative errno otherwise.
+ * Calls the gadget release function in the latter case.
+ */
+int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
+ void (*release)(struct device *dev))
+{
+ int ret;
+
+ usb_initialize_gadget(parent, gadget, release);
+ ret = usb_add_gadget(gadget);
+ if (ret)
+ usb_put_gadget(gadget);
return ret;
}
EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
@@ -1311,13 +1348,14 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
}
/**
- * usb_del_gadget_udc - deletes @udc from udc_list
+ * usb_del_gadget - deletes @udc from udc_list
* @gadget: the gadget to be removed.
*
- * This, will call usb_gadget_unregister_driver() if
+ * This will call usb_gadget_unregister_driver() if
* the @udc is still busy.
+ * It will not do a final usb_put_gadget().
*/
-void usb_del_gadget_udc(struct usb_gadget *gadget)
+void usb_del_gadget(struct usb_gadget *gadget)
{
struct usb_udc *udc = gadget->udc;
@@ -1340,8 +1378,20 @@ void usb_del_gadget_udc(struct usb_gadget *gadget)
kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE);
flush_work(&gadget->work);
device_unregister(&udc->dev);
- device_unregister(&gadget->dev);
- memset(&gadget->dev, 0x00, sizeof(gadget->dev));
+ device_del(&gadget->dev);
+}
+EXPORT_SYMBOL_GPL(usb_del_gadget);
+
+/**
+ * usb_del_gadget_udc - deletes @udc from udc_list
+ * @gadget: the gadget to be removed.
+ *
+ * Calls usb_del_gadget() and does a final usb_put_gadget().
+ */
+void usb_del_gadget_udc(struct usb_gadget *gadget)
+{
+ usb_del_gadget(gadget);
+ usb_put_gadget(gadget);
}
EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c
index 2707be628298..fa66449b3907 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.c
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.c
@@ -923,9 +923,9 @@ static int qe_ep_rxframe_handle(struct qe_ep *ep)
return 0;
}
-static void ep_rx_tasklet(unsigned long data)
+static void ep_rx_tasklet(struct tasklet_struct *t)
{
- struct qe_udc *udc = (struct qe_udc *)data;
+ struct qe_udc *udc = from_tasklet(udc, t, rx_tasklet);
struct qe_ep *ep;
struct qe_frame *pframe;
struct qe_bd __iomem *bd;
@@ -2553,8 +2553,7 @@ static int qe_udc_probe(struct platform_device *ofdev)
DMA_TO_DEVICE);
}
- tasklet_init(&udc->rx_tasklet, ep_rx_tasklet,
- (unsigned long)udc);
+ tasklet_setup(&udc->rx_tasklet, ep_rx_tasklet);
/* request irq and disable DR */
udc->usb_irq = irq_of_parse_and_map(np, 0);
if (!udc->usb_irq) {
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index a6f7b2594c09..de528e3b0662 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -2061,7 +2061,7 @@ static int fsl_proc_read(struct seq_file *m, void *v)
"Sleep Enable: %d SOF Received Enable: %d "
"Reset Enable: %d\n"
"System Error Enable: %d "
- "Port Change Dectected Enable: %d\n"
+ "Port Change Detected Enable: %d\n"
"USB Error Intr Enable: %d USB Intr Enable: %d\n\n",
(tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0,
(tmp_reg & USB_INTR_SOF_EN) ? 1 : 0,
@@ -2439,11 +2439,12 @@ static int fsl_udc_probe(struct platform_device *pdev)
/* DEN is bidirectional ep number, max_ep doubles the number */
udc_controller->max_ep = (dccparams & DCCPARAMS_DEN_MASK) * 2;
- udc_controller->irq = platform_get_irq(pdev, 0);
- if (udc_controller->irq <= 0) {
- ret = udc_controller->irq ? : -ENODEV;
+ ret = platform_get_irq(pdev, 0);
+ if (ret <= 0) {
+ ret = ret ? : -ENODEV;
goto err_iounmap;
}
+ udc_controller->irq = ret;
ret = request_irq(udc_controller->irq, fsl_udc_irq, IRQF_SHARED,
driver_name, udc_controller);
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index e8a4637a9a17..3f1c62adce4b 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -495,7 +495,7 @@ static void proc_ep_show(struct seq_file *s, struct lpc32xx_ep *ep)
}
}
-static int proc_udc_show(struct seq_file *s, void *unused)
+static int udc_show(struct seq_file *s, void *unused)
{
struct lpc32xx_udc *udc = s->private;
struct lpc32xx_ep *ep;
@@ -524,22 +524,11 @@ static int proc_udc_show(struct seq_file *s, void *unused)
return 0;
}
-static int proc_udc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, proc_udc_show, PDE_DATA(inode));
-}
-
-static const struct file_operations proc_ops = {
- .owner = THIS_MODULE,
- .open = proc_udc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(udc);
static void create_debug_file(struct lpc32xx_udc *udc)
{
- udc->pde = debugfs_create_file(debug_filename, 0, NULL, udc, &proc_ops);
+ udc->pde = debugfs_create_file(debug_filename, 0, NULL, udc, &udc_fops);
}
static void remove_debug_file(struct lpc32xx_udc *udc)
diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index 44d1ea2307bb..23a735641c3d 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -9,7 +9,6 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
-#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -2196,7 +2195,8 @@ static int net2272_present(struct net2272 *dev)
static void
net2272_gadget_release(struct device *_dev)
{
- struct net2272 *dev = dev_get_drvdata(_dev);
+ struct net2272 *dev = container_of(_dev, struct net2272, gadget.dev);
+
kfree(dev);
}
@@ -2205,7 +2205,8 @@ net2272_gadget_release(struct device *_dev)
static void
net2272_remove(struct net2272 *dev)
{
- usb_del_gadget_udc(&dev->gadget);
+ if (dev->added)
+ usb_del_gadget(&dev->gadget);
free_irq(dev->irq, dev);
iounmap(dev->base_addr);
device_remove_file(dev->dev, &dev_attr_registers);
@@ -2235,6 +2236,7 @@ static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq)
/* the "gadget" abstracts/virtualizes the controller */
ret->gadget.name = driver_name;
+ usb_initialize_gadget(dev, &ret->gadget, net2272_gadget_release);
return ret;
}
@@ -2273,10 +2275,10 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
if (ret)
goto err_irq;
- ret = usb_add_gadget_udc_release(dev->dev, &dev->gadget,
- net2272_gadget_release);
+ ret = usb_add_gadget(&dev->gadget);
if (ret)
goto err_add_udc;
+ dev->added = 1;
return 0;
@@ -2451,7 +2453,7 @@ net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (pci_enable_device(pdev) < 0) {
ret = -ENODEV;
- goto err_free;
+ goto err_put;
}
pci_set_master(pdev);
@@ -2474,8 +2476,8 @@ net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
err_pci:
pci_disable_device(pdev);
- err_free:
- kfree(dev);
+ err_put:
+ usb_put_gadget(&dev->gadget);
return ret;
}
@@ -2536,7 +2538,7 @@ net2272_pci_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
- kfree(dev);
+ usb_put_gadget(&dev->gadget);
}
/* Table of matching PCI IDs */
@@ -2649,7 +2651,7 @@ net2272_plat_probe(struct platform_device *pdev)
err_req:
release_mem_region(base, len);
err:
- kfree(dev);
+ usb_put_gadget(&dev->gadget);
return ret;
}
@@ -2664,7 +2666,7 @@ net2272_plat_remove(struct platform_device *pdev)
release_mem_region(pdev->resource[0].start,
resource_size(&pdev->resource[0]));
- kfree(dev);
+ usb_put_gadget(&dev->gadget);
return 0;
}
diff --git a/drivers/usb/gadget/udc/net2272.h b/drivers/usb/gadget/udc/net2272.h
index 87d0ab9ffeeb..c669308111c2 100644
--- a/drivers/usb/gadget/udc/net2272.h
+++ b/drivers/usb/gadget/udc/net2272.h
@@ -441,6 +441,7 @@ struct net2272 {
unsigned protocol_stall:1,
softconnect:1,
wakeup:1,
+ added:1,
dma_eot_polarity:1,
dma_dack_polarity:1,
dma_dreq_polarity:1,
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 7530bd9a08c4..fc9f99fe7f37 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -52,6 +52,7 @@
#include <linux/usb/gadget.h>
#include <linux/prefetch.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
@@ -360,18 +361,16 @@ print_err:
static int handshake(u32 __iomem *ptr, u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = readl(ptr);
- if (result == ~(u32)0) /* "device unplugged" */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX),
+ 1, usec);
+ if (result == U32_MAX) /* device unplugged */
+ return -ENODEV;
+
+ return ret;
}
static const struct usb_ep_ops net2280_ep_ops;
@@ -3561,7 +3560,7 @@ static irqreturn_t net2280_irq(int irq, void *_dev)
static void gadget_release(struct device *_dev)
{
- struct net2280 *dev = dev_get_drvdata(_dev);
+ struct net2280 *dev = container_of(_dev, struct net2280, gadget.dev);
kfree(dev);
}
@@ -3572,7 +3571,8 @@ static void net2280_remove(struct pci_dev *pdev)
{
struct net2280 *dev = pci_get_drvdata(pdev);
- usb_del_gadget_udc(&dev->gadget);
+ if (dev->added)
+ usb_del_gadget(&dev->gadget);
BUG_ON(dev->driver);
@@ -3603,6 +3603,7 @@ static void net2280_remove(struct pci_dev *pdev)
device_remove_file(&pdev->dev, &dev_attr_registers);
ep_info(dev, "unbind\n");
+ usb_put_gadget(&dev->gadget);
}
/* wrap this driver around the specified device, but
@@ -3624,6 +3625,7 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
pci_set_drvdata(pdev, dev);
+ usb_initialize_gadget(&pdev->dev, &dev->gadget, gadget_release);
spin_lock_init(&dev->lock);
dev->quirks = id->driver_data;
dev->pdev = pdev;
@@ -3774,10 +3776,10 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (retval)
goto done;
- retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget,
- gadget_release);
+ retval = usb_add_gadget(&dev->gadget);
if (retval)
goto done;
+ dev->added = 1;
return 0;
done:
diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h
index 85d3ca1698ba..7da3dc1e9729 100644
--- a/drivers/usb/gadget/udc/net2280.h
+++ b/drivers/usb/gadget/udc/net2280.h
@@ -156,6 +156,7 @@ struct net2280 {
softconnect : 1,
got_irq : 1,
region:1,
+ added:1,
u1_enable:1,
u2_enable:1,
ltm_enable:1,
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 8afc31d94b0e..a3c1fc924268 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -12,12 +12,9 @@
#include <linux/interrupt.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/irq.h>
-/* GPIO port for VBUS detecting */
-static int vbus_gpio_port = -1; /* GPIO port number (-1:Not used) */
-
#define PCH_VBUS_PERIOD 3000 /* VBUS polling period (msec) */
#define PCH_VBUS_INTERVAL 10 /* VBUS polling interval (msec) */
@@ -301,13 +298,13 @@ struct pch_udc_ep {
/**
* struct pch_vbus_gpio_data - Structure holding GPIO informaton
* for detecting VBUS
- * @port: gpio port number
+ * @port: gpio descriptor for the VBUS GPIO
* @intr: gpio interrupt number
* @irq_work_fall: Structure for WorkQueue
* @irq_work_rise: Structure for WorkQueue
*/
struct pch_vbus_gpio_data {
- int port;
+ struct gpio_desc *port;
int intr;
struct work_struct irq_work_fall;
struct work_struct irq_work_rise;
@@ -1254,7 +1251,7 @@ static int pch_vbus_gpio_get_value(struct pch_udc_dev *dev)
int vbus = 0;
if (dev->vbus_gpio.port)
- vbus = gpio_get_value(dev->vbus_gpio.port) ? 1 : 0;
+ vbus = gpiod_get_value(dev->vbus_gpio.port) ? 1 : 0;
else
vbus = -1;
@@ -1356,42 +1353,30 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
/**
* pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS.
* @dev: Reference to the driver structure
- * @vbus_gpio_port: Number of GPIO port to detect gpio
*
* Return codes:
* 0: Success
* -EINVAL: GPIO port is invalid or can't be initialized.
*/
-static int pch_vbus_gpio_init(struct pch_udc_dev *dev, int vbus_gpio_port)
+static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
{
int err;
int irq_num = 0;
+ struct gpio_desc *gpiod;
- dev->vbus_gpio.port = 0;
+ dev->vbus_gpio.port = NULL;
dev->vbus_gpio.intr = 0;
- if (vbus_gpio_port <= -1)
- return -EINVAL;
-
- err = gpio_is_valid(vbus_gpio_port);
- if (!err) {
- pr_err("%s: gpio port %d is invalid\n",
- __func__, vbus_gpio_port);
- return -EINVAL;
- }
-
- err = gpio_request(vbus_gpio_port, "pch_vbus");
- if (err) {
- pr_err("%s: can't request gpio port %d, err: %d\n",
- __func__, vbus_gpio_port, err);
- return -EINVAL;
- }
+ /* Retrieve the GPIO line from the USB gadget device */
+ gpiod = devm_gpiod_get(dev->gadget.dev.parent, NULL, GPIOD_IN);
+ if (IS_ERR(gpiod))
+ return PTR_ERR(gpiod);
+ gpiod_set_consumer_name(gpiod, "pch_vbus");
- dev->vbus_gpio.port = vbus_gpio_port;
- gpio_direction_input(vbus_gpio_port);
+ dev->vbus_gpio.port = gpiod;
INIT_WORK(&dev->vbus_gpio.irq_work_fall, pch_vbus_gpio_work_fall);
- irq_num = gpio_to_irq(vbus_gpio_port);
+ irq_num = gpiod_to_irq(gpiod);
if (irq_num > 0) {
irq_set_irq_type(irq_num, IRQ_TYPE_EDGE_BOTH);
err = request_irq(irq_num, pch_vbus_gpio_irq, 0,
@@ -1417,9 +1402,6 @@ static void pch_vbus_gpio_free(struct pch_udc_dev *dev)
{
if (dev->vbus_gpio.intr)
free_irq(dev->vbus_gpio.intr, dev);
-
- if (dev->vbus_gpio.port)
- gpio_free(dev->vbus_gpio.port);
}
/**
@@ -2894,7 +2876,7 @@ static int pch_udc_pcd_init(struct pch_udc_dev *dev)
{
pch_udc_init(dev);
pch_udc_pcd_reinit(dev);
- pch_vbus_gpio_init(dev, vbus_gpio_port);
+ pch_vbus_gpio_init(dev);
return 0;
}
@@ -3096,6 +3078,13 @@ static int pch_udc_probe(struct pci_dev *pdev,
dev->base_addr = pcim_iomap_table(pdev)[bar];
+ /*
+ * FIXME: add a GPIO descriptor table to pdev.dev using
+ * gpiod_add_descriptor_table() from <linux/gpio/machine.h> based on
+ * the PCI subsystem ID. The system-dependent GPIO is necessary for
+ * VBUS operation.
+ */
+
/* initialize the hardware */
if (pch_udc_pcd_init(dev))
return -ENODEV;
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index bc2e8eb737c3..e875a0b967c0 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -1270,7 +1270,6 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
struct s3c2410_ep *ep = to_s3c2410_ep(_ep);
- struct s3c2410_udc *udc;
int retval = -EINVAL;
unsigned long flags;
struct s3c2410_request *req = NULL;
@@ -1283,8 +1282,6 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
if (!_ep || !_req)
return retval;
- udc = to_s3c2410_udc(ep->gadget);
-
local_irq_save(flags);
list_for_each_entry(req, &ep->queue, queue) {
diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index d6ff68c06911..580bef8eb4cb 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -705,11 +705,11 @@ static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc)
err = phy_power_on(xudc->curr_utmi_phy);
if (err < 0)
- dev_err(xudc->dev, "utmi power on failed %d\n", err);
+ dev_err(xudc->dev, "UTMI power on failed: %d\n", err);
err = phy_power_on(xudc->curr_usb3_phy);
if (err < 0)
- dev_err(xudc->dev, "usb3 phy power on failed %d\n", err);
+ dev_err(xudc->dev, "USB3 PHY power on failed: %d\n", err);
dev_dbg(xudc->dev, "device mode on\n");
@@ -759,11 +759,11 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc)
err = phy_power_off(xudc->curr_utmi_phy);
if (err < 0)
- dev_err(xudc->dev, "utmi_phy power off failed %d\n", err);
+ dev_err(xudc->dev, "UTMI PHY power off failed: %d\n", err);
err = phy_power_off(xudc->curr_usb3_phy);
if (err < 0)
- dev_err(xudc->dev, "usb3_phy power off failed %d\n", err);
+ dev_err(xudc->dev, "USB3 PHY power off failed: %d\n", err);
pm_runtime_put(xudc->dev);
}
@@ -1539,7 +1539,7 @@ static int __tegra_xudc_ep_set_halt(struct tegra_xudc_ep *ep, bool halt)
return -EINVAL;
if (usb_endpoint_xfer_isoc(ep->desc)) {
- dev_err(xudc->dev, "can't halt isoc EP\n");
+ dev_err(xudc->dev, "can't halt isochronous EP\n");
return -ENOTSUPP;
}
@@ -1788,7 +1788,7 @@ static int __tegra_xudc_ep_enable(struct tegra_xudc_ep *ep,
if (usb_endpoint_xfer_isoc(desc)) {
if (xudc->nr_isoch_eps > XUDC_MAX_ISOCH_EPS) {
- dev_err(xudc->dev, "too many isoch endpoints\n");
+ dev_err(xudc->dev, "too many isochronous endpoints\n");
return -EBUSY;
}
xudc->nr_isoch_eps++;
@@ -3509,7 +3509,7 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
if (IS_ERR(xudc->utmi_phy[i])) {
err = PTR_ERR(xudc->utmi_phy[i]);
if (err != -EPROBE_DEFER)
- dev_err(xudc->dev, "failed to get usb2-%d phy: %d\n",
+ dev_err(xudc->dev, "failed to get usb2-%d PHY: %d\n",
i, err);
goto clean_up;
@@ -3539,12 +3539,12 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
if (IS_ERR(xudc->usb3_phy[i])) {
err = PTR_ERR(xudc->usb3_phy[i]);
if (err != -EPROBE_DEFER)
- dev_err(xudc->dev, "failed to get usb3-%d phy: %d\n",
+ dev_err(xudc->dev, "failed to get usb3-%d PHY: %d\n",
usb3, err);
goto clean_up;
} else if (xudc->usb3_phy[i])
- dev_dbg(xudc->dev, "usb3_phy-%d registered", usb3);
+ dev_dbg(xudc->dev, "usb3-%d PHY registered", usb3);
}
return err;
@@ -3577,13 +3577,13 @@ static int tegra_xudc_phy_init(struct tegra_xudc *xudc)
for (i = 0; i < xudc->soc->num_phys; i++) {
err = phy_init(xudc->utmi_phy[i]);
if (err < 0) {
- dev_err(xudc->dev, "utmi phy init failed: %d\n", err);
+ dev_err(xudc->dev, "UTMI PHY #%u initialization failed: %d\n", i, err);
goto exit_phy;
}
err = phy_init(xudc->usb3_phy[i]);
if (err < 0) {
- dev_err(xudc->dev, "usb3 phy init failed: %d\n", err);
+ dev_err(xudc->dev, "USB3 PHY #%u initialization failed: %d\n", i, err);
goto exit_phy;
}
}
@@ -3692,34 +3692,33 @@ static int tegra_xudc_powerdomain_init(struct tegra_xudc *xudc)
struct device *dev = xudc->dev;
int err;
- xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev,
- "dev");
+ xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev, "dev");
if (IS_ERR(xudc->genpd_dev_device)) {
err = PTR_ERR(xudc->genpd_dev_device);
- dev_err(dev, "failed to get dev pm-domain: %d\n", err);
+ dev_err(dev, "failed to get device power domain: %d\n", err);
return err;
}
xudc->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "ss");
if (IS_ERR(xudc->genpd_dev_ss)) {
err = PTR_ERR(xudc->genpd_dev_ss);
- dev_err(dev, "failed to get superspeed pm-domain: %d\n", err);
+ dev_err(dev, "failed to get SuperSpeed power domain: %d\n", err);
return err;
}
xudc->genpd_dl_device = device_link_add(dev, xudc->genpd_dev_device,
- DL_FLAG_PM_RUNTIME |
- DL_FLAG_STATELESS);
+ DL_FLAG_PM_RUNTIME |
+ DL_FLAG_STATELESS);
if (!xudc->genpd_dl_device) {
- dev_err(dev, "adding usb device device link failed!\n");
+ dev_err(dev, "failed to add USB device link\n");
return -ENODEV;
}
xudc->genpd_dl_ss = device_link_add(dev, xudc->genpd_dev_ss,
- DL_FLAG_PM_RUNTIME |
- DL_FLAG_STATELESS);
+ DL_FLAG_PM_RUNTIME |
+ DL_FLAG_STATELESS);
if (!xudc->genpd_dl_ss) {
- dev_err(dev, "adding superspeed device link failed!\n");
+ dev_err(dev, "failed to add SuperSpeed device link\n");
return -ENODEV;
}
@@ -3733,7 +3732,7 @@ static int tegra_xudc_probe(struct platform_device *pdev)
unsigned int i;
int err;
- xudc = devm_kzalloc(&pdev->dev, sizeof(*xudc), GFP_ATOMIC);
+ xudc = devm_kzalloc(&pdev->dev, sizeof(*xudc), GFP_KERNEL);
if (!xudc)
return -ENOMEM;
@@ -3772,18 +3771,19 @@ static int tegra_xudc_probe(struct platform_device *pdev)
return err;
}
- xudc->clks = devm_kcalloc(&pdev->dev, xudc->soc->num_clks,
- sizeof(*xudc->clks), GFP_KERNEL);
+ xudc->clks = devm_kcalloc(&pdev->dev, xudc->soc->num_clks, sizeof(*xudc->clks),
+ GFP_KERNEL);
if (!xudc->clks)
return -ENOMEM;
for (i = 0; i < xudc->soc->num_clks; i++)
xudc->clks[i].id = xudc->soc->clock_names[i];
- err = devm_clk_bulk_get(&pdev->dev, xudc->soc->num_clks,
- xudc->clks);
+ err = devm_clk_bulk_get(&pdev->dev, xudc->soc->num_clks, xudc->clks);
if (err) {
- dev_err(xudc->dev, "failed to request clks %d\n", err);
+ if (err != -EPROBE_DEFER)
+ dev_err(xudc->dev, "failed to request clocks: %d\n", err);
+
return err;
}
@@ -3798,7 +3798,9 @@ static int tegra_xudc_probe(struct platform_device *pdev)
err = devm_regulator_bulk_get(&pdev->dev, xudc->soc->num_supplies,
xudc->supplies);
if (err) {
- dev_err(xudc->dev, "failed to request regulators %d\n", err);
+ if (err != -EPROBE_DEFER)
+ dev_err(xudc->dev, "failed to request regulators: %d\n", err);
+
return err;
}
@@ -3808,7 +3810,7 @@ static int tegra_xudc_probe(struct platform_device *pdev)
err = regulator_bulk_enable(xudc->soc->num_supplies, xudc->supplies);
if (err) {
- dev_err(xudc->dev, "failed to enable regulators %d\n", err);
+ dev_err(xudc->dev, "failed to enable regulators: %d\n", err);
goto put_padctl;
}
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
index b1b777f33521..337b425dd4b0 100644
--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -498,15 +498,4 @@ static struct bcma_driver bcma_hcd_driver = {
.suspend = bcma_hcd_suspend,
.resume = bcma_hcd_resume,
};
-
-static int __init bcma_hcd_init(void)
-{
- return bcma_driver_register(&bcma_hcd_driver);
-}
-module_init(bcma_hcd_init);
-
-static void __exit bcma_hcd_exit(void)
-{
- bcma_driver_unregister(&bcma_hcd_driver);
-}
-module_exit(bcma_hcd_exit);
+module_bcma_driver(bcma_hcd_driver);
diff --git a/drivers/usb/host/ehci-npcm7xx.c b/drivers/usb/host/ehci-npcm7xx.c
index adaf8fb4b459..6b5a7a873e01 100644
--- a/drivers/usb/host/ehci-npcm7xx.c
+++ b/drivers/usb/host/ehci-npcm7xx.c
@@ -37,8 +37,7 @@ static const char hcd_name[] = "npcm7xx-ehci";
static struct hc_driver __read_mostly ehci_npcm7xx_hc_driver;
-#ifdef CONFIG_PM_SLEEP
-static int ehci_npcm7xx_drv_suspend(struct device *dev)
+static int __maybe_unused ehci_npcm7xx_drv_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
bool do_wakeup = device_may_wakeup(dev);
@@ -46,14 +45,13 @@ static int ehci_npcm7xx_drv_suspend(struct device *dev)
return ehci_suspend(hcd, do_wakeup);
}
-static int ehci_npcm7xx_drv_resume(struct device *dev)
+static int __maybe_unused ehci_npcm7xx_drv_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
ehci_resume(hcd, false);
return 0;
}
-#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(ehci_npcm7xx_pm_ops, ehci_npcm7xx_drv_suspend,
ehci_npcm7xx_drv_resume);
@@ -183,7 +181,7 @@ static struct platform_driver npcm7xx_ehci_hcd_driver = {
.driver = {
.name = "npcm7xx-ehci",
.bus = &platform_bus_type,
- .pm = &ehci_npcm7xx_pm_ops,
+ .pm = pm_ptr(&ehci_npcm7xx_pm_ops),
.of_match_table = npcm7xx_ehci_id_table,
}
};
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 006c4f6188a5..a48dd3fac153 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -42,6 +42,9 @@
#define EHCI_MAX_CLKS 4
#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
+#define BCM_USB_FIFO_THRESHOLD 0x00800040
+#define bcm_iproc_insnreg01 hostpc[0]
+
struct ehci_platform_priv {
struct clk *clks[EHCI_MAX_CLKS];
struct reset_control *rsts;
@@ -75,6 +78,11 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
if (pdata->no_io_watchdog)
ehci->need_io_watchdog = 0;
+
+ if (of_device_is_compatible(pdev->dev.of_node, "brcm,xgs-iproc-ehci"))
+ ehci_writel(ehci, BCM_USB_FIFO_THRESHOLD,
+ &ehci->regs->bcm_iproc_insnreg01);
+
return 0;
}
@@ -410,8 +418,7 @@ static int ehci_platform_remove(struct platform_device *dev)
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int ehci_platform_suspend(struct device *dev)
+static int __maybe_unused ehci_platform_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
@@ -433,7 +440,7 @@ static int ehci_platform_suspend(struct device *dev)
return ret;
}
-static int ehci_platform_resume(struct device *dev)
+static int __maybe_unused ehci_platform_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
@@ -464,7 +471,6 @@ static int ehci_platform_resume(struct device *dev)
return 0;
}
-#endif /* CONFIG_PM_SLEEP */
static const struct of_device_id vt8500_ehci_ids[] = {
{ .compatible = "via,vt8500-ehci", },
@@ -499,7 +505,7 @@ static struct platform_driver ehci_platform_driver = {
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "ehci-platform",
- .pm = &ehci_platform_pm_ops,
+ .pm = pm_ptr(&ehci_platform_pm_ops),
.of_match_table = vt8500_ehci_ids,
.acpi_match_table = ACPI_PTR(ehci_acpi_match),
}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 847979f265b1..6dfb242f9a4b 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -307,26 +307,6 @@ static int __maybe_unused same_tt(struct usb_device *dev1,
#ifdef CONFIG_USB_EHCI_TT_NEWSCHED
-/* Which uframe does the low/fullspeed transfer start in?
- *
- * The parameter is the mask of ssplits in "H-frame" terms
- * and this returns the transfer start uframe in "B-frame" terms,
- * which allows both to match, e.g. a ssplit in "H-frame" uframe 0
- * will cause a transfer in "B-frame" uframe 0. "B-frames" lag
- * "H-frames" by 1 uframe. See the EHCI spec sec 4.5 and figure 4.7.
- */
-static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
-{
- unsigned char smask = hc32_to_cpu(ehci, mask) & QH_SMASK;
-
- if (!smask) {
- ehci_err(ehci, "invalid empty smask!\n");
- /* uframe 7 can't have bw so this will indicate failure */
- return 7;
- }
- return ffs(smask) - 1;
-}
-
static const unsigned char
max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index add796c78561..3694e450a11a 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -34,8 +34,7 @@ struct spear_ehci {
static struct hc_driver __read_mostly ehci_spear_hc_driver;
-#ifdef CONFIG_PM_SLEEP
-static int ehci_spear_drv_suspend(struct device *dev)
+static int __maybe_unused ehci_spear_drv_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
bool do_wakeup = device_may_wakeup(dev);
@@ -43,14 +42,13 @@ static int ehci_spear_drv_suspend(struct device *dev)
return ehci_suspend(hcd, do_wakeup);
}
-static int ehci_spear_drv_resume(struct device *dev)
+static int __maybe_unused ehci_spear_drv_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
ehci_resume(hcd, false);
return 0;
}
-#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend,
ehci_spear_drv_resume);
@@ -155,7 +153,7 @@ static struct platform_driver spear_ehci_hcd_driver = {
.driver = {
.name = "spear-ehci",
.bus = &platform_bus_type,
- .pm = &ehci_spear_pm_ops,
+ .pm = pm_ptr(&ehci_spear_pm_ops),
.of_match_table = spear_ehci_id_table,
}
};
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 194df8282471..1d94fcfac2c2 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -32,6 +32,7 @@
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/clk.h>
#include <asm/byteorder.h>
@@ -883,18 +884,15 @@ static int handshake(struct fotg210_hcd *fotg210, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = fotg210_readl(fotg210, ptr);
- if (result == ~(u32)0) /* card removed */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX), 1, usec);
+ if (result == U32_MAX) /* card removed */
+ return -ENODEV;
+
+ return ret;
}
/* Force HC to halt state from unknown (EHCI spec section 2.3).
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index dd37e77dae00..73e13e7c2b46 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -102,7 +102,7 @@ static void io_watchdog_func(struct timer_list *t);
/* Some boards misreport power switching/overcurrent */
-static bool distrust_firmware = true;
+static bool distrust_firmware;
module_param (distrust_firmware, bool, 0);
MODULE_PARM_DESC (distrust_firmware,
"true to distrust firmware power/overcurrent setup");
@@ -673,20 +673,24 @@ retry:
/* handle root hub init quirks ... */
val = roothub_a (ohci);
- val &= ~(RH_A_PSM | RH_A_OCPM);
+ /* Configure for per-port over-current protection by default */
+ val &= ~RH_A_NOCP;
+ val |= RH_A_OCPM;
if (ohci->flags & OHCI_QUIRK_SUPERIO) {
- /* NSC 87560 and maybe others */
+ /* NSC 87560 and maybe others.
+ * Ganged power switching, no over-current protection.
+ */
val |= RH_A_NOCP;
- val &= ~(RH_A_POTPGT | RH_A_NPS);
- ohci_writel (ohci, val, &ohci->regs->roothub.a);
+ val &= ~(RH_A_POTPGT | RH_A_NPS | RH_A_PSM | RH_A_OCPM);
} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
/* hub power always on; required for AMD-756 and some
- * Mac platforms. ganged overcurrent reporting, if any.
+ * Mac platforms.
*/
val |= RH_A_NPS;
- ohci_writel (ohci, val, &ohci->regs->roothub.a);
}
+ ohci_writel(ohci, val, &ohci->regs->roothub.a);
+
ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
&ohci->regs->roothub.b);
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index cfa7dd2cc7d3..27dbbe1b28b1 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -24,6 +24,7 @@
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
@@ -748,18 +749,16 @@ static int handshake(struct oxu_hcd *oxu, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
- do {
- result = readl(ptr);
- if (result == ~(u32)0) /* card removed */
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ ret = readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done ||
+ result == U32_MAX),
+ 1, usec);
+ if (result == U32_MAX) /* card removed */
+ return -ENODEV;
+
+ return ret;
}
/* Force HC to halt state from unknown (EHCI spec section 2.3) */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 8c1bbac6d136..ef08d68b9714 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -16,8 +16,8 @@
#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
-
-#include <soc/bcm2835/raspberrypi-firmware.h>
+#include <linux/of.h>
+#include <linux/iopoll.h>
#include "pci-quirks.h"
#include "xhci-ext-caps.h"
@@ -1013,15 +1013,9 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done,
{
u32 result;
- do {
- result = readl(ptr);
- result &= mask;
- if (result == done)
- return 0;
- udelay(delay_usec);
- wait_usec -= delay_usec;
- } while (wait_usec > 0);
- return -ETIMEDOUT;
+ return readl_poll_timeout_atomic(ptr, result,
+ ((result & mask) == done),
+ delay_usec, wait_usec);
}
/*
@@ -1247,7 +1241,8 @@ iounmap:
static void quirk_usb_early_handoff(struct pci_dev *pdev)
{
- int ret;
+ struct device_node *parent;
+ bool is_rpi;
/* Skip Netlogic mips SoC's internal PCI USB controller.
* This device does not need/support EHCI/OHCI handoff
@@ -1255,14 +1250,16 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev)
if (pdev->vendor == 0x184e) /* vendor Netlogic */
return;
+ /*
+ * Bypass the Raspberry Pi 4 controller xHCI controller, things are
+ * taken care of by the board's co-processor.
+ */
if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
- ret = rpi_firmware_init_vl805(pdev);
- if (ret) {
- /* Firmware might be outdated, or something failed */
- dev_warn(&pdev->dev,
- "Failed to load VL805's firmware: %d. Will continue to attempt to work, but bad things might happen. You should fix this...\n",
- ret);
- }
+ parent = of_get_parent(pdev->bus->dev.of_node);
+ is_rpi = of_device_is_compatible(parent, "brcm,bcm2711-pcie");
+ of_node_put(parent);
+ if (is_rpi)
+ return;
}
if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c
index b8918f73a432..ae4e4ab638b5 100644
--- a/drivers/usb/host/xhci-dbgtty.c
+++ b/drivers/usb/host/xhci-dbgtty.c
@@ -288,14 +288,14 @@ static const struct tty_operations dbc_tty_ops = {
.unthrottle = dbc_tty_unthrottle,
};
-static void dbc_rx_push(unsigned long _port)
+static void dbc_rx_push(struct tasklet_struct *t)
{
struct dbc_request *req;
struct tty_struct *tty;
unsigned long flags;
bool do_push = false;
bool disconnect = false;
- struct dbc_port *port = (void *)_port;
+ struct dbc_port *port = from_tasklet(port, t, push);
struct list_head *queue = &port->read_queue;
spin_lock_irqsave(&port->port_lock, flags);
@@ -382,7 +382,7 @@ xhci_dbc_tty_init_port(struct xhci_dbc *dbc, struct dbc_port *port)
{
tty_port_init(&port->port);
spin_lock_init(&port->port_lock);
- tasklet_init(&port->push, dbc_rx_push, (unsigned long)port);
+ tasklet_setup(&port->push, dbc_rx_push);
INIT_LIST_HEAD(&port->read_pool);
INIT_LIST_HEAD(&port->read_queue);
INIT_LIST_HEAD(&port->write_pool);
diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c
index c88bffd68742..2c0fda57869e 100644
--- a/drivers/usb/host/xhci-debugfs.c
+++ b/drivers/usb/host/xhci-debugfs.c
@@ -451,9 +451,11 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,
if (!epriv)
return;
+ epriv->show_ring = dev->eps[ep_index].ring;
+
snprintf(epriv->name, sizeof(epriv->name), "ep%02d", ep_index);
epriv->root = xhci_debugfs_create_ring_dir(xhci,
- &dev->eps[ep_index].ring,
+ &epriv->show_ring,
epriv->name,
spriv->root);
spriv->eps[ep_index] = epriv;
@@ -475,6 +477,111 @@ void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
kfree(epriv);
}
+static int xhci_stream_id_show(struct seq_file *s, void *unused)
+{
+ struct xhci_ep_priv *epriv = s->private;
+
+ if (!epriv->stream_info)
+ return -EPERM;
+
+ seq_printf(s, "Show stream ID %d trb ring, supported [1 - %d]\n",
+ epriv->stream_id, epriv->stream_info->num_streams - 1);
+
+ return 0;
+}
+
+static int xhci_stream_id_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, xhci_stream_id_show, inode->i_private);
+}
+
+static ssize_t xhci_stream_id_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct xhci_ep_priv *epriv = s->private;
+ int ret;
+ u16 stream_id; /* MaxPStreams + 1 <= 16 */
+
+ if (!epriv->stream_info)
+ return -EPERM;
+
+ /* Decimal number */
+ ret = kstrtou16_from_user(ubuf, count, 10, &stream_id);
+ if (ret)
+ return ret;
+
+ if (stream_id == 0 || stream_id >= epriv->stream_info->num_streams)
+ return -EINVAL;
+
+ epriv->stream_id = stream_id;
+ epriv->show_ring = epriv->stream_info->stream_rings[stream_id];
+
+ return count;
+}
+
+static const struct file_operations stream_id_fops = {
+ .open = xhci_stream_id_open,
+ .write = xhci_stream_id_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int xhci_stream_context_array_show(struct seq_file *s, void *unused)
+{
+ struct xhci_ep_priv *epriv = s->private;
+ struct xhci_stream_ctx *stream_ctx;
+ dma_addr_t dma;
+ int id;
+
+ if (!epriv->stream_info)
+ return -EPERM;
+
+ seq_printf(s, "Allocated %d streams and %d stream context array entries\n",
+ epriv->stream_info->num_streams,
+ epriv->stream_info->num_stream_ctxs);
+
+ for (id = 0; id < epriv->stream_info->num_stream_ctxs; id++) {
+ stream_ctx = epriv->stream_info->stream_ctx_array + id;
+ dma = epriv->stream_info->ctx_array_dma + id * 16;
+ if (id < epriv->stream_info->num_streams)
+ seq_printf(s, "%pad stream id %d deq %016llx\n", &dma,
+ id, le64_to_cpu(stream_ctx->stream_ring));
+ else
+ seq_printf(s, "%pad stream context entry not used deq %016llx\n",
+ &dma, le64_to_cpu(stream_ctx->stream_ring));
+ }
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(xhci_stream_context_array);
+
+void xhci_debugfs_create_stream_files(struct xhci_hcd *xhci,
+ struct xhci_virt_device *dev,
+ int ep_index)
+{
+ struct xhci_slot_priv *spriv = dev->debugfs_private;
+ struct xhci_ep_priv *epriv;
+
+ if (!spriv || !spriv->eps[ep_index] ||
+ !dev->eps[ep_index].stream_info)
+ return;
+
+ epriv = spriv->eps[ep_index];
+ epriv->stream_info = dev->eps[ep_index].stream_info;
+
+ /* Show trb ring of stream ID 1 by default */
+ epriv->stream_id = 1;
+ epriv->show_ring = epriv->stream_info->stream_rings[1];
+ debugfs_create_file("stream_id", 0644,
+ epriv->root, epriv,
+ &stream_id_fops);
+ debugfs_create_file("stream_context_array", 0444,
+ epriv->root, epriv,
+ &xhci_stream_context_array_fops);
+}
+
void xhci_debugfs_create_slot(struct xhci_hcd *xhci, int slot_id)
{
struct xhci_slot_priv *priv;
diff --git a/drivers/usb/host/xhci-debugfs.h b/drivers/usb/host/xhci-debugfs.h
index 56db635fcd6e..7c074b4be819 100644
--- a/drivers/usb/host/xhci-debugfs.h
+++ b/drivers/usb/host/xhci-debugfs.h
@@ -91,6 +91,9 @@ struct xhci_file_map {
struct xhci_ep_priv {
char name[DEBUGFS_NAMELEN];
struct dentry *root;
+ struct xhci_stream_info *stream_info;
+ struct xhci_ring *show_ring;
+ unsigned int stream_id;
};
struct xhci_slot_priv {
@@ -113,6 +116,9 @@ void xhci_debugfs_create_endpoint(struct xhci_hcd *xhci,
void xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
int ep_index);
+void xhci_debugfs_create_stream_files(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ int ep_index);
#else
static inline void xhci_debugfs_init(struct xhci_hcd *xhci) { }
static inline void xhci_debugfs_exit(struct xhci_hcd *xhci) { }
@@ -128,6 +134,10 @@ static inline void
xhci_debugfs_remove_endpoint(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
int ep_index) { }
+static inline void
+xhci_debugfs_create_stream_files(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ int ep_index) { }
#endif /* CONFIG_DEBUG_FS */
#endif /* __LINUX_XHCI_DEBUGFS_H */
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 4311d4c9b68d..8f321f39ab96 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -77,7 +77,7 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
{
struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
u32 value, check_val;
- int u3_ports_disabed = 0;
+ int u3_ports_disabled = 0;
int ret;
int i;
@@ -92,7 +92,7 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
/* power on and enable u3 ports except skipped ones */
for (i = 0; i < mtk->num_u3_ports; i++) {
if ((0x1 << i) & mtk->u3p_dis_msk) {
- u3_ports_disabed++;
+ u3_ports_disabled++;
continue;
}
@@ -117,7 +117,7 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
STS1_SYS125_RST | STS1_XHCI_RST;
- if (mtk->num_u3_ports > u3_ports_disabed)
+ if (mtk->num_u3_ports > u3_ports_disabled)
check_val |= STS1_U3_MAC_RST;
ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 3feaafebfe58..c26c06e5c88c 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/acpi.h>
+#include <linux/reset.h>
#include "xhci.h"
#include "xhci-trace.h"
@@ -346,6 +347,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
struct xhci_hcd *xhci;
struct usb_hcd *hcd;
struct xhci_driver_data *driver_data;
+ struct reset_control *reset;
driver_data = (struct xhci_driver_data *)id->driver_data;
if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
@@ -354,6 +356,11 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
return retval;
}
+ reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL);
+ if (IS_ERR(reset))
+ return PTR_ERR(reset);
+ reset_control_reset(reset);
+
/* Prevent runtime suspending between USB-2 and USB-3 initialization */
pm_runtime_get_noresume(&dev->dev);
@@ -371,6 +378,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* USB 2.0 roothub is stored in the PCI device now. */
hcd = dev_get_drvdata(&dev->dev);
xhci = hcd_to_xhci(hcd);
+ xhci->reset = reset;
xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev,
pci_name(dev), hcd);
if (!xhci->shared_hcd) {
@@ -522,6 +530,8 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
int retval = 0;
+ reset_control_reset(xhci->reset);
+
/* The BIOS on systems with the Intel Panther Point chipset may or may
* not support xHCI natively. That means that during system resume, it
* may switch the ports back to EHCI so that users can use their
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 3057cfc76d6a..aa2d35f98200 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -54,6 +54,16 @@ static int xhci_priv_init_quirk(struct usb_hcd *hcd)
return priv->init_quirk(hcd);
}
+static int xhci_priv_suspend_quirk(struct usb_hcd *hcd)
+{
+ struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+ if (!priv->suspend_quirk)
+ return 0;
+
+ return priv->suspend_quirk(hcd);
+}
+
static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
{
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
@@ -173,6 +183,8 @@ static int xhci_plat_probe(struct platform_device *pdev)
struct usb_hcd *hcd;
int ret;
int irq;
+ struct xhci_plat_priv *priv = NULL;
+
if (usb_disabled())
return -ENODEV;
@@ -264,16 +276,18 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (ret)
goto disable_reg_clk;
- priv_match = of_device_get_match_data(&pdev->dev);
- if (priv_match) {
- struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+ if (pdev->dev.of_node)
+ priv_match = of_device_get_match_data(&pdev->dev);
+ else
+ priv_match = dev_get_platdata(&pdev->dev);
+ if (priv_match) {
+ priv = hcd_to_xhci_priv(hcd);
/* Just copy data for now */
- if (priv_match)
- *priv = *priv_match;
+ *priv = *priv_match;
}
- device_wakeup_enable(hcd->self.controller);
+ device_set_wakeup_capable(&pdev->dev, true);
xhci->main_hcd = hcd;
xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev,
@@ -316,6 +330,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
xhci->shared_hcd->tpl_support = hcd->tpl_support;
+ if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
+ hcd->skip_phy_initialization = 1;
+
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto disable_usb_phy;
@@ -397,14 +414,14 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int ret;
+ ret = xhci_priv_suspend_quirk(hcd);
+ if (ret)
+ return ret;
/*
* xhci_suspend() needs `do_wakeup` to know whether host is allowed
- * to do wakeup during suspend. Since xhci_plat_suspend is currently
- * only designed for system suspend, device_may_wakeup() is enough
- * to dertermine whether host is allowed to do wakeup. Need to
- * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
- * also applies to runtime suspend.
+ * to do wakeup during suspend.
*/
return xhci_suspend(xhci, device_may_wakeup(dev));
}
@@ -434,6 +451,11 @@ static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ int ret;
+
+ ret = xhci_priv_suspend_quirk(hcd);
+ if (ret)
+ return ret;
return xhci_suspend(xhci, true);
}
diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
index b49f6447bd3a..1fb149d1fbce 100644
--- a/drivers/usb/host/xhci-plat.h
+++ b/drivers/usb/host/xhci-plat.h
@@ -15,6 +15,7 @@ struct xhci_plat_priv {
unsigned long long quirks;
void (*plat_start)(struct usb_hcd *);
int (*init_quirk)(struct usb_hcd *);
+ int (*suspend_quirk)(struct usb_hcd *);
int (*resume_quirk)(struct usb_hcd *);
};
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index c1025d321a41..1bc4fe7b8c75 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -6,6 +6,7 @@
*/
#include <linux/firmware.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
@@ -127,8 +128,7 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
void __iomem *regs = hcd->regs;
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
const struct firmware *fw;
- int retval, index, j, time;
- int timeout = 10000;
+ int retval, index, j;
u32 data, val, temp;
u32 quirks = 0;
const struct soc_device_attribute *attr;
@@ -166,32 +166,19 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
writel(temp, regs + RCAR_USB3_DL_CTRL);
- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0)
- break;
- udelay(1);
- }
- if (time == timeout) {
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL,
+ val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0),
+ 1, 10000);
+ if (retval < 0)
break;
- }
}
temp = readl(regs + RCAR_USB3_DL_CTRL);
temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
writel(temp, regs + RCAR_USB3_DL_CTRL);
- for (time = 0; time < timeout; time++) {
- val = readl(regs + RCAR_USB3_DL_CTRL);
- if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) {
- retval = 0;
- break;
- }
- udelay(1);
- }
- if (time == timeout)
- retval = -ETIMEDOUT;
+ retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL),
+ val, val & RCAR_USB3_DL_CTRL_FW_SUCCESS, 1, 10000);
release_firmware(fw);
@@ -200,18 +187,12 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
{
- int timeout = 1000;
+ int retval;
u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK;
- while (timeout > 0) {
- val = readl(hcd->regs + RCAR_USB3_AXH_STA);
- if ((val & mask) == mask)
- return true;
- udelay(1);
- timeout--;
- }
-
- return false;
+ retval = readl_poll_timeout_atomic(hcd->regs + RCAR_USB3_AXH_STA,
+ val, (val & mask) == mask, 1, 1000);
+ return !retval;
}
/* This function needs to initialize a "phy" of usb before */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a741a38a4c69..167dae117f73 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3736,6 +3736,24 @@ static int xhci_get_isoc_frame_id(struct xhci_hcd *xhci,
return start_frame;
}
+/* Check if we should generate event interrupt for a TD in an isoc URB */
+static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i)
+{
+ if (xhci->hci_version < 0x100)
+ return false;
+ /* always generate an event interrupt for the last TD */
+ if (i == num_tds - 1)
+ return false;
+ /*
+ * If AVOID_BEI is set the host handles full event rings poorly,
+ * generate an event at least every 8th TD to clear the event ring
+ */
+ if (i && xhci->quirks & XHCI_AVOID_BEI)
+ return !!(i % 8);
+
+ return true;
+}
+
/* This is for isoc transfer */
static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index)
@@ -3843,10 +3861,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
more_trbs_coming = false;
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
- /* set BEI, except for the last TD */
- if (xhci->hci_version >= 0x100 &&
- !(xhci->quirks & XHCI_AVOID_BEI) &&
- i < num_tds - 1)
+ if (trb_block_event_intr(xhci, num_tds, i))
field |= TRB_BEI;
}
/* Calculate TRB length */
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 190923d8b246..934be1686352 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1866,7 +1866,6 @@ static const struct tegra_xusb_phy_type tegra124_phy_types[] = {
static const unsigned int tegra124_xusb_context_ipfs[] = {
IPFS_XUSB_HOST_MSI_BAR_SZ_0,
- IPFS_XUSB_HOST_MSI_BAR_SZ_0,
IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0,
IPFS_XUSB_HOST_MSI_FPCI_BAR_ST_0,
IPFS_XUSB_HOST_MSI_VEC0_0,
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f4cedcaee14b..482fe8c5e3b4 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -982,12 +982,15 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
xhci->shared_hcd->state != HC_STATE_SUSPENDED)
return -EINVAL;
- xhci_dbc_suspend(xhci);
-
/* Clear root port wake on bits if wakeup not allowed. */
if (!do_wakeup)
xhci_disable_port_wake_on_bits(xhci);
+ if (!HCD_HW_ACCESSIBLE(hcd))
+ return 0;
+
+ xhci_dbc_suspend(xhci);
+
/* Don't poll the roothubs on bus suspend. */
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
@@ -1915,8 +1918,6 @@ static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
trace_xhci_add_endpoint(ep_ctx);
- xhci_debugfs_create_endpoint(xhci, virt_dev, ep_index);
-
xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
(unsigned int) ep->desc.bEndpointAddress,
udev->slot_id,
@@ -2949,6 +2950,7 @@ static int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
virt_dev->eps[i].new_ring = NULL;
+ xhci_debugfs_create_endpoint(xhci, virt_dev, i);
}
command_cleanup:
kfree(command->completion);
@@ -3531,6 +3533,7 @@ static int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n",
udev->slot_id, ep_index);
vdev->eps[ep_index].ep_state |= EP_HAS_STREAMS;
+ xhci_debugfs_create_stream_files(xhci, vdev, ep_index);
}
xhci_free_command(xhci, config_cmd);
spin_unlock_irqrestore(&xhci->lock, flags);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ea1754f185a2..8be88379c0fb 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1770,6 +1770,8 @@ struct xhci_hcd {
/* optional clocks */
struct clk *clk;
struct clk *reg_clk;
+ /* optional reset controller */
+ struct reset_control *reset;
/* data structures */
struct xhci_device_context_array *dcbaa;
struct xhci_ring *cmd_ring;
@@ -1874,6 +1876,7 @@ struct xhci_hcd {
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)
+#define XHCI_SKIP_PHY_INIT BIT_ULL(37)
unsigned int num_active_eps;
unsigned int limit_active_eps;
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 360416680e82..59b02a539963 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -389,7 +389,7 @@ void mts_int_submit_urb (struct urb* transfer,
res = usb_submit_urb( transfer, GFP_ATOMIC );
if ( unlikely(res) ) {
MTS_INT_ERROR( "could not submit URB! Error was %d\n",(int)res );
- context->srb->result = DID_ERROR << 16;
+ set_host_byte(context->srb, DID_ERROR);
mts_transfer_cleanup(transfer);
}
}
@@ -438,7 +438,7 @@ static void mts_data_done( struct urb* transfer )
scsi_set_resid(context->srb, context->data_length -
transfer->actual_length);
} else if ( unlikely(status) ) {
- context->srb->result = (status == -ENOENT ? DID_ABORT : DID_ERROR)<<16;
+ set_host_byte(context->srb, (status == -ENOENT ? DID_ABORT : DID_ERROR));
}
mts_get_status(transfer);
@@ -455,12 +455,12 @@ static void mts_command_done( struct urb *transfer )
if (status == -ENOENT) {
/* We are being killed */
MTS_DEBUG_GOT_HERE();
- context->srb->result = DID_ABORT<<16;
+ set_host_byte(context->srb, DID_ABORT);
} else {
/* A genuine error has occurred */
MTS_DEBUG_GOT_HERE();
- context->srb->result = DID_ERROR<<16;
+ set_host_byte(context->srb, DID_ERROR);
}
mts_transfer_cleanup(transfer);
@@ -495,7 +495,7 @@ static void mts_do_sg (struct urb* transfer)
scsi_sg_count(context->srb));
if (unlikely(status)) {
- context->srb->result = (status == -ENOENT ? DID_ABORT : DID_ERROR)<<16;
+ set_host_byte(context->srb, (status == -ENOENT ? DID_ABORT : DID_ERROR));
mts_transfer_cleanup(transfer);
}
@@ -578,7 +578,7 @@ mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback
MTS_DEBUG("this device doesn't exist\n");
- srb->result = DID_BAD_TARGET << 16;
+ set_host_byte(srb, DID_BAD_TARGET);
if(likely(callback != NULL))
callback(srb);
@@ -605,7 +605,7 @@ mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback
if(unlikely(res)){
MTS_ERROR("error %d submitting URB\n",(int)res);
- srb->result = DID_ERROR << 16;
+ set_host_byte(srb, DID_ERROR);
if(likely(callback != NULL))
callback(srb);
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index dd74ab7a2f9c..33ae656c4b68 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -22,6 +22,7 @@
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/mm.h>
#include <linux/timer.h>
#include <asm/unaligned.h>
@@ -380,18 +381,15 @@ static int handshake(struct usb_hcd *hcd, u32 reg,
u32 mask, u32 done, int usec)
{
u32 result;
+ int ret;
+
+ ret = readl_poll_timeout_atomic(hcd->regs + reg, result,
+ ((result & mask) == done ||
+ result == U32_MAX), 1, usec);
+ if (result == U32_MAX)
+ return -ENODEV;
- do {
- result = reg_read32(hcd->regs, reg);
- if (result == ~0)
- return -ENODEV;
- result &= mask;
- if (result == done)
- return 0;
- udelay(1);
- usec--;
- } while (usec > 0);
- return -ETIMEDOUT;
+ return ret;
}
/* reset a non-running (STS_HALT == 1) controller */
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index a7eefe11f31a..45a387979935 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -209,6 +209,7 @@ static void adu_interrupt_out_callback(struct urb *urb)
if (status != 0) {
if ((status != -ENOENT) &&
+ (status != -ESHUTDOWN) &&
(status != -ECONNRESET)) {
dev_dbg(&dev->udev->dev,
"%s :nonzero status received: %d\n", __func__,
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 36fed1a09666..c8098e9b432e 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -342,20 +342,8 @@ static struct usb_driver appledisplay_driver = {
.disconnect = appledisplay_disconnect,
.id_table = appledisplay_table,
};
-
-static int __init appledisplay_init(void)
-{
- return usb_register(&appledisplay_driver);
-}
-
-static void __exit appledisplay_exit(void)
-{
- usb_deregister(&appledisplay_driver);
-}
+module_usb_driver(appledisplay_driver);
MODULE_AUTHOR("Michael Hanselmann");
MODULE_DESCRIPTION("Apple Cinema Display driver");
MODULE_LICENSE("GPL");
-
-module_init(appledisplay_init);
-module_exit(appledisplay_exit);
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index f922544056de..ba655b4af4fc 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -308,15 +308,9 @@ static int tower_open(struct inode *inode, struct file *file)
int subminor;
int retval = 0;
struct usb_interface *interface;
- struct tower_reset_reply *reset_reply;
+ struct tower_reset_reply reset_reply;
int result;
- reset_reply = kmalloc(sizeof(*reset_reply), GFP_KERNEL);
- if (!reset_reply) {
- retval = -ENOMEM;
- goto exit;
- }
-
nonseekable_open(inode, file);
subminor = iminor(inode);
@@ -347,15 +341,12 @@ static int tower_open(struct inode *inode, struct file *file)
}
/* reset the tower */
- result = usb_control_msg(dev->udev,
- usb_rcvctrlpipe(dev->udev, 0),
- LEGO_USB_TOWER_REQUEST_RESET,
- USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
- 0,
- 0,
- reset_reply,
- sizeof(*reset_reply),
- 1000);
+ result = usb_control_msg_recv(dev->udev, 0,
+ LEGO_USB_TOWER_REQUEST_RESET,
+ USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
+ 0, 0,
+ &reset_reply, sizeof(reset_reply), 1000,
+ GFP_KERNEL);
if (result < 0) {
dev_err(&dev->udev->dev,
"LEGO USB Tower reset control request failed\n");
@@ -394,7 +385,6 @@ unlock_exit:
mutex_unlock(&dev->lock);
exit:
- kfree(reset_reply);
return retval;
}
@@ -753,7 +743,7 @@ static int tower_probe(struct usb_interface *interface, const struct usb_device_
struct device *idev = &interface->dev;
struct usb_device *udev = interface_to_usbdev(interface);
struct lego_usb_tower *dev;
- struct tower_get_version_reply *get_version_reply = NULL;
+ struct tower_get_version_reply get_version_reply;
int retval = -ENOMEM;
int result;
@@ -798,34 +788,25 @@ static int tower_probe(struct usb_interface *interface, const struct usb_device_
dev->interrupt_in_interval = interrupt_in_interval ? interrupt_in_interval : dev->interrupt_in_endpoint->bInterval;
dev->interrupt_out_interval = interrupt_out_interval ? interrupt_out_interval : dev->interrupt_out_endpoint->bInterval;
- get_version_reply = kmalloc(sizeof(*get_version_reply), GFP_KERNEL);
- if (!get_version_reply) {
- retval = -ENOMEM;
- goto error;
- }
-
/* get the firmware version and log it */
- result = usb_control_msg(udev,
- usb_rcvctrlpipe(udev, 0),
- LEGO_USB_TOWER_REQUEST_GET_VERSION,
- USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
- 0,
- 0,
- get_version_reply,
- sizeof(*get_version_reply),
- 1000);
- if (result != sizeof(*get_version_reply)) {
- if (result >= 0)
- result = -EIO;
+ result = usb_control_msg_recv(udev, 0,
+ LEGO_USB_TOWER_REQUEST_GET_VERSION,
+ USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
+ 0,
+ 0,
+ &get_version_reply,
+ sizeof(get_version_reply),
+ 1000, GFP_KERNEL);
+ if (!result) {
dev_err(idev, "get version request failed: %d\n", result);
retval = result;
goto error;
}
dev_info(&interface->dev,
"LEGO USB Tower firmware version is %d.%d build %d\n",
- get_version_reply->major,
- get_version_reply->minor,
- le16_to_cpu(get_version_reply->build_no));
+ get_version_reply.major,
+ get_version_reply.minor,
+ le16_to_cpu(get_version_reply.build_no));
/* we can register the device now, as it is ready */
usb_set_intfdata(interface, dev);
@@ -844,11 +825,9 @@ static int tower_probe(struct usb_interface *interface, const struct usb_device_
USB_MAJOR, dev->minor);
exit:
- kfree(get_version_reply);
return retval;
error:
- kfree(get_version_reply);
tower_delete(dev);
return retval;
}
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index 116bd789e568..48099c6bf04c 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -322,8 +322,7 @@ static int usb3503_platform_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int usb3503_suspend(struct usb3503 *hub)
+static int __maybe_unused usb3503_suspend(struct usb3503 *hub)
{
usb3503_switch_mode(hub, USB3503_MODE_STANDBY);
clk_disable_unprepare(hub->clk);
@@ -331,7 +330,7 @@ static int usb3503_suspend(struct usb3503 *hub)
return 0;
}
-static int usb3503_resume(struct usb3503 *hub)
+static int __maybe_unused usb3503_resume(struct usb3503 *hub)
{
clk_prepare_enable(hub->clk);
usb3503_switch_mode(hub, hub->mode);
@@ -339,30 +338,29 @@ static int usb3503_resume(struct usb3503 *hub)
return 0;
}
-static int usb3503_i2c_suspend(struct device *dev)
+static int __maybe_unused usb3503_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
return usb3503_suspend(i2c_get_clientdata(client));
}
-static int usb3503_i2c_resume(struct device *dev)
+static int __maybe_unused usb3503_i2c_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
return usb3503_resume(i2c_get_clientdata(client));
}
-static int usb3503_platform_suspend(struct device *dev)
+static int __maybe_unused usb3503_platform_suspend(struct device *dev)
{
return usb3503_suspend(dev_get_drvdata(dev));
}
-static int usb3503_platform_resume(struct device *dev)
+static int __maybe_unused usb3503_platform_resume(struct device *dev)
{
return usb3503_resume(dev_get_drvdata(dev));
}
-#endif
static SIMPLE_DEV_PM_OPS(usb3503_i2c_pm_ops, usb3503_i2c_suspend,
usb3503_i2c_resume);
@@ -388,7 +386,7 @@ MODULE_DEVICE_TABLE(of, usb3503_of_match);
static struct i2c_driver usb3503_i2c_driver = {
.driver = {
.name = USB3503_I2C_NAME,
- .pm = &usb3503_i2c_pm_ops,
+ .pm = pm_ptr(&usb3503_i2c_pm_ops),
.of_match_table = of_match_ptr(usb3503_of_match),
},
.probe = usb3503_i2c_probe,
@@ -400,7 +398,7 @@ static struct platform_driver usb3503_platform_driver = {
.driver = {
.name = USB3503_I2C_NAME,
.of_match_table = of_match_ptr(usb3503_of_match),
- .pm = &usb3503_platform_pm_ops,
+ .pm = pm_ptr(&usb3503_platform_pm_ops),
},
.probe = usb3503_platform_probe,
.remove = usb3503_platform_remove,
diff --git a/drivers/usb/misc/usb4604.c b/drivers/usb/misc/usb4604.c
index 1b4de651e697..2142af9bbdec 100644
--- a/drivers/usb/misc/usb4604.c
+++ b/drivers/usb/misc/usb4604.c
@@ -112,8 +112,7 @@ static int usb4604_i2c_probe(struct i2c_client *i2c,
return usb4604_probe(hub);
}
-#ifdef CONFIG_PM_SLEEP
-static int usb4604_i2c_suspend(struct device *dev)
+static int __maybe_unused usb4604_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct usb4604 *hub = i2c_get_clientdata(client);
@@ -123,7 +122,7 @@ static int usb4604_i2c_suspend(struct device *dev)
return 0;
}
-static int usb4604_i2c_resume(struct device *dev)
+static int __maybe_unused usb4604_i2c_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct usb4604 *hub = i2c_get_clientdata(client);
@@ -132,7 +131,6 @@ static int usb4604_i2c_resume(struct device *dev)
return 0;
}
-#endif
static SIMPLE_DEV_PM_OPS(usb4604_i2c_pm_ops, usb4604_i2c_suspend,
usb4604_i2c_resume);
@@ -154,7 +152,7 @@ MODULE_DEVICE_TABLE(of, usb4604_of_match);
static struct i2c_driver usb4604_i2c_driver = {
.driver = {
.name = "usb4604",
- .pm = &usb4604_i2c_pm_ops,
+ .pm = pm_ptr(&usb4604_i2c_pm_ops),
.of_match_table = of_match_ptr(usb4604_of_match),
},
.probe = usb4604_i2c_probe,
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 61e9e987fe4a..bb546f624a45 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -187,7 +187,6 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
break;
default:
return -ENOTTY;
- break;
}
return 0;
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index b2e09883c7e2..e3165d79b5f6 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -96,15 +96,13 @@ static void yurex_delete(struct kref *kref)
if (dev->cntl_urb) {
usb_kill_urb(dev->cntl_urb);
kfree(dev->cntl_req);
- if (dev->cntl_buffer)
- usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
+ usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
dev->cntl_buffer, dev->cntl_urb->transfer_dma);
usb_free_urb(dev->cntl_urb);
}
if (dev->urb) {
usb_kill_urb(dev->urb);
- if (dev->int_buffer)
- usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
+ usb_free_coherent(dev->udev, YUREX_BUF_SIZE,
dev->int_buffer, dev->urb->transfer_dma);
usb_free_urb(dev->urb);
}
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index 71f4f02c05c6..aef0a0bba25a 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -370,12 +370,6 @@ static inline struct mtu3 *gadget_to_mtu3(struct usb_gadget *g)
return container_of(g, struct mtu3, g);
}
-static inline int is_first_entry(const struct list_head *list,
- const struct list_head *head)
-{
- return list_is_last(head, list);
-}
-
static inline struct mtu3_request *to_mtu3_request(struct usb_request *req)
{
return req ? container_of(req, struct mtu3_request, request) : NULL;
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 44d3cb02fa76..6d7336727388 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -1024,7 +1024,7 @@ static int musb_g_ep0_halt(struct usb_ep *e, int value)
case MUSB_EP0_STAGE_ACKWAIT: /* STALL for zero-length data */
case MUSB_EP0_STAGE_RX: /* control-OUT data */
csr = musb_readw(regs, MUSB_CSR0);
- /* FALLTHROUGH */
+ fallthrough;
/* It's also OK to issue stalls during callbacks when a non-empty
* DATA stage buffer has been read (or even written).
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index aa4a3140394b..4c52ba96f17e 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -518,7 +518,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
* 3. Enable AB regulators
* 4. Enable USB phy
* 5. Reset the musb controller
- * 6. Switch the ULPI GPIO pins to fucntion mode
+ * 6. Switch the ULPI GPIO pins to function mode
* 7. Enable the musb Peripheral5 clock
* 8. Restore MUSB context
*/
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index ce767ecc0636..576d925af77c 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -8,6 +8,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/uaccess.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
@@ -135,8 +136,8 @@ static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id,
static int mv_otg_reset(struct mv_otg *mvotg)
{
- unsigned int loops;
u32 tmp;
+ int ret;
/* Stop the controller */
tmp = readl(&mvotg->op_regs->usbcmd);
@@ -146,15 +147,12 @@ static int mv_otg_reset(struct mv_otg *mvotg)
/* Reset the controller to get default values */
writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd);
- loops = 500;
- while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) {
- if (loops == 0) {
- dev_err(&mvotg->pdev->dev,
- "Wait for RESET completed TIMEOUT\n");
- return -ETIMEDOUT;
- }
- loops--;
- udelay(20);
+ ret = readl_poll_timeout_atomic(&mvotg->op_regs->usbcmd, tmp,
+ (tmp & USBCMD_CTRL_RESET), 10, 10000);
+ if (ret < 0) {
+ dev_err(&mvotg->pdev->dev,
+ "Wait for RESET completed TIMEOUT\n");
+ return ret;
}
writel(0x0, &mvotg->op_regs->usbintr);
diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c
index 7a14e0e3b635..0f61e328eaef 100644
--- a/drivers/usb/phy/phy-ulpi-viewport.c
+++ b/drivers/usb/phy/phy-ulpi-viewport.c
@@ -7,6 +7,7 @@
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -20,16 +21,9 @@
static int ulpi_viewport_wait(void __iomem *view, u32 mask)
{
- unsigned long usec = 2000;
+ u32 val;
- while (usec--) {
- if (!(readl(view) & mask))
- return 0;
-
- udelay(1);
- }
-
- return -ETIMEDOUT;
+ return readl_poll_timeout_atomic(view, val, !(val & mask), 1, 2000);
}
static int ulpi_viewport_read(struct usb_phy *otg, u32 reg)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 9823bb424abd..e0f4c3d9649c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1037,6 +1037,11 @@ static const struct usb_device_id id_table_combined[] = {
/* U-Blox devices */
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
+ /* FreeCalypso USB adapters */
+ { USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ } /* Terminating entry */
};
@@ -1566,7 +1571,8 @@ static void ftdi_determine_type(struct usb_serial_port *port)
dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__,
version, interfaces);
if (interfaces > 1) {
- int inter;
+ struct usb_interface *intf = serial->interface;
+ int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
/* Multiple interfaces.*/
if (version == 0x0800) {
@@ -1581,16 +1587,15 @@ static void ftdi_determine_type(struct usb_serial_port *port)
priv->chip_type = FT2232C;
/* Determine interface code. */
- inter = serial->interface->altsetting->desc.bInterfaceNumber;
- if (inter == 0) {
+ if (ifnum == 0)
priv->interface = INTERFACE_A;
- } else if (inter == 1) {
+ else if (ifnum == 1)
priv->interface = INTERFACE_B;
- } else if (inter == 2) {
+ else if (ifnum == 2)
priv->interface = INTERFACE_C;
- } else if (inter == 3) {
+ else if (ifnum == 3)
priv->interface = INTERFACE_D;
- }
+
/* BM-type devices have a bug where bcdDevice gets set
* to 0x200 when iSerialNumber is 0. */
if (version < 0x500) {
@@ -2330,12 +2335,11 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial)
*/
static int ftdi_jtag_probe(struct usb_serial *serial)
{
- struct usb_device *udev = serial->dev;
- struct usb_interface *interface = serial->interface;
+ struct usb_interface *intf = serial->interface;
+ int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
- if (interface == udev->actconfig->interface[0]) {
- dev_info(&udev->dev,
- "Ignoring serial port reserved for JTAG\n");
+ if (ifnum == 0) {
+ dev_info(&intf->dev, "Ignoring interface reserved for JTAG\n");
return -ENODEV;
}
@@ -2367,12 +2371,11 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
*/
static int ftdi_stmclite_probe(struct usb_serial *serial)
{
- struct usb_device *udev = serial->dev;
- struct usb_interface *interface = serial->interface;
+ struct usb_interface *intf = serial->interface;
+ int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
- if (interface == udev->actconfig->interface[0] ||
- interface == udev->actconfig->interface[1]) {
- dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+ if (ifnum < 2) {
+ dev_info(&intf->dev, "Ignoring interface reserved for JTAG\n");
return -ENODEV;
}
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index b5ca17a5967a..3d47c6d72256 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -39,6 +39,13 @@
#define FTDI_LUMEL_PD12_PID 0x6002
+/*
+ * Custom USB adapters made by Falconia Partners LLC
+ * for FreeCalypso project, ID codes allocated to Falconia by FTDI.
+ */
+#define FTDI_FALCONIA_JTAG_BUF_PID 0x7150
+#define FTDI_FALCONIA_JTAG_UNBUF_PID 0x7151
+
/* Sienna Serial Interface by Secyourit GmbH */
#define FTDI_SIENNA_PID 0x8348
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 2ec4eeacebc7..5eed1078fac8 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -282,11 +282,12 @@ static void destroy_urbtracker(struct kref *kref)
* port callback had to be deferred because the disconnect mutex could not be
* obtained at the time.
*/
-static void send_deferred_urbs(unsigned long _mos_parport)
+static void send_deferred_urbs(struct tasklet_struct *t)
{
int ret_val;
unsigned long flags;
- struct mos7715_parport *mos_parport = (void *)_mos_parport;
+ struct mos7715_parport *mos_parport = from_tasklet(mos_parport, t,
+ urb_tasklet);
struct urbtracker *urbtrack, *tmp;
struct list_head *cursor, *next;
struct device *dev;
@@ -716,8 +717,7 @@ static int mos7715_parport_init(struct usb_serial *serial)
INIT_LIST_HEAD(&mos_parport->deferred_urbs);
usb_set_serial_data(serial, mos_parport); /* hijack private pointer */
mos_parport->serial = serial;
- tasklet_init(&mos_parport->urb_tasklet, send_deferred_urbs,
- (unsigned long) mos_parport);
+ tasklet_setup(&mos_parport->urb_tasklet, send_deferred_urbs);
init_completion(&mos_parport->syncmsg_compl);
/* cycle parallel port reset bit */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 0c6f160a214a..2a3bfd6f867e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -528,6 +528,7 @@ static void option_instat_callback(struct urb *urb);
/* Cellient products */
#define CELLIENT_VENDOR_ID 0x2692
#define CELLIENT_PRODUCT_MEN200 0x9005
+#define CELLIENT_PRODUCT_MPL200 0x9025
/* Hyundai Petatel Inc. products */
#define PETATEL_VENDOR_ID 0x1ff4
@@ -1186,6 +1187,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = NCTRL(2) | RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1053, 0xff), /* Telit FN980 (ECM) */
.driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1054, 0xff), /* Telit FT980-KS */
+ .driver_info = NCTRL(2) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
@@ -1982,6 +1985,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
+ { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MPL200),
+ .driver_info = RSVD(1) | RSVD(4) },
{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) },
{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
{ USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, TPLINK_PRODUCT_LTE, 0xff, 0x00, 0x00) }, /* TP-Link LTE Module */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 048452d8a4a4..be8067017eaa 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -100,6 +100,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD381_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD381GC_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 7d3090ee7e0c..0f681ddbfd28 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -127,6 +127,7 @@
/* Hewlett-Packard POS Pole Displays */
#define HP_VENDOR_ID 0x03f0
+#define HP_LD381GC_PRODUCT_ID 0x0183
#define HP_LM920_PRODUCT_ID 0x026b
#define HP_TD620_PRODUCT_ID 0x0956
#define HP_LD960_PRODUCT_ID 0x0b39
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index c8d1ea0e6e6f..83da8236e3c8 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -243,11 +243,11 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
/* QDL mode */
/* Gobi 2000 has a single altsetting, older ones have two */
if (serial->interface->num_altsetting == 2)
- intf = &serial->interface->altsetting[1];
+ intf = usb_altnum_to_altsetting(serial->interface, 1);
else if (serial->interface->num_altsetting > 2)
goto done;
- if (intf->desc.bNumEndpoints == 2 &&
+ if (intf && intf->desc.bNumEndpoints == 2 &&
usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
dev_dbg(dev, "QDL port found\n");
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 89f5e33a6e6d..3c76336e43bb 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1383,7 +1383,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us,
ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
isd200_srb_set_bufflen(srb, 0);
} else {
- usb_stor_dbg(us, " Not removeable media, just report okay\n");
+ usb_stor_dbg(us, " Not removable media, just report okay\n");
srb->result = SAM_STAT_GOOD;
sendToTransport = 0;
}
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index e5a971b83e3f..560efd1479ba 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -92,7 +92,7 @@ static int slave_alloc (struct scsi_device *sdev)
static int slave_configure(struct scsi_device *sdev)
{
struct us_data *us = host_to_us(sdev->host);
- struct device *dev = us->pusb_dev->bus->sysdev;
+ struct device *dev = sdev->host->dma_dev;
/*
* Many devices have trouble transferring more than 32KB at a time,
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 8183504e3abb..c8a577309e8f 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -279,17 +279,17 @@ static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *
switch (response_code) {
case RC_INCORRECT_LUN:
- cmnd->result = DID_BAD_TARGET << 16;
+ set_host_byte(cmnd, DID_BAD_TARGET);
break;
case RC_TMF_SUCCEEDED:
- cmnd->result = DID_OK << 16;
+ set_host_byte(cmnd, DID_OK);
break;
case RC_TMF_NOT_SUPPORTED:
- cmnd->result = DID_TARGET_FAILURE << 16;
+ set_host_byte(cmnd, DID_TARGET_FAILURE);
break;
default:
uas_log_cmd_state(cmnd, "response iu", response_code);
- cmnd->result = DID_ERROR << 16;
+ set_host_byte(cmnd, DID_ERROR);
break;
}
@@ -660,7 +660,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
spin_lock_irqsave(&devinfo->lock, flags);
if (devinfo->resetting) {
- cmnd->result = DID_ERROR << 16;
+ set_host_byte(cmnd, DID_ERROR);
cmnd->scsi_done(cmnd);
goto zombie;
}
@@ -704,7 +704,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
* of queueing, no matter how fatal the error
*/
if (err == -ENODEV) {
- cmnd->result = DID_ERROR << 16;
+ set_host_byte(cmnd, DID_ERROR);
cmnd->scsi_done(cmnd);
goto zombie;
}
@@ -837,17 +837,24 @@ static int uas_slave_alloc(struct scsi_device *sdev)
*/
blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
- if (devinfo->flags & US_FL_MAX_SECTORS_64)
- blk_queue_max_hw_sectors(sdev->request_queue, 64);
- else if (devinfo->flags & US_FL_MAX_SECTORS_240)
- blk_queue_max_hw_sectors(sdev->request_queue, 240);
-
return 0;
}
static int uas_slave_configure(struct scsi_device *sdev)
{
struct uas_dev_info *devinfo = sdev->hostdata;
+ struct device *dev = sdev->host->dma_dev;
+
+ if (devinfo->flags & US_FL_MAX_SECTORS_64)
+ blk_queue_max_hw_sectors(sdev->request_queue, 64);
+ else if (devinfo->flags & US_FL_MAX_SECTORS_240)
+ blk_queue_max_hw_sectors(sdev->request_queue, 240);
+ else if (devinfo->udev->speed >= USB_SPEED_SUPER)
+ blk_queue_max_hw_sectors(sdev->request_queue, 2048);
+
+ blk_queue_max_hw_sectors(sdev->request_queue,
+ min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
+ dma_max_mapping_size(dev) >> SECTOR_SHIFT));
if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
sdev->no_report_opcodes = 1;
@@ -1033,7 +1040,7 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
shost->can_queue = devinfo->qdepth - 2;
usb_set_intfdata(intf, shost);
- result = scsi_add_host(shost, &intf->dev);
+ result = scsi_add_host_with_dma(shost, &intf->dev, udev->bus->sysdev);
if (result)
goto free_streams;
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 94a64729dc27..c2ef367cf257 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -1049,8 +1049,9 @@ int usb_stor_probe2(struct us_data *us)
goto BadDevice;
usb_autopm_get_interface_no_resume(us->pusb_intf);
snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
- dev_name(&us->pusb_intf->dev));
- result = scsi_add_host(us_to_host(us), dev);
+ dev_name(dev));
+ result = scsi_add_host_with_dma(us_to_host(us), dev,
+ us->pusb_dev->bus->sysdev);
if (result) {
dev_warn(dev,
"Unable to add the scsi host\n");
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 559dd06117e7..6c5908a37ee8 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -73,6 +73,30 @@ config TYPEC_TPS6598X
If you choose to build this driver as a dynamically linked module, the
module will be called tps6598x.ko.
+config TYPEC_STUSB160X
+ tristate "STMicroelectronics STUSB160x Type-C controller driver"
+ depends on I2C
+ depends on REGMAP_I2C
+ depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
+ help
+ Say Y or M here if your system has STMicroelectronics STUSB160x
+ Type-C port controller.
+
+ If you choose to build this driver as a dynamically linked module, the
+ module will be called stusb160x.ko.
+
+config TYPEC_QCOM_PMIC
+ tristate "Qualcomm PMIC USB Type-C driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ Driver for supporting role switch over the Qualcomm PMIC. This will
+ handle the USB Type-C role and orientation detection reported by the
+ QCOM PMIC if the PMIC has the capability to handle USB Type-C
+ detection.
+
+ It will also enable the VBUS output to connected devices when a
+ DFP connection is made.
+
source "drivers/usb/typec/mux/Kconfig"
source "drivers/usb/typec/altmodes/Kconfig"
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
index 7753a5c3cd46..d03b48c4b864 100644
--- a/drivers/usb/typec/Makefile
+++ b/drivers/usb/typec/Makefile
@@ -6,4 +6,6 @@ obj-$(CONFIG_TYPEC_TCPM) += tcpm/
obj-$(CONFIG_TYPEC_UCSI) += ucsi/
obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o
+obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o
+obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o
obj-$(CONFIG_TYPEC) += mux/
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index 7b20073d7fc0..e62e5e3da01e 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -190,7 +190,7 @@ static void dp_altmode_work(struct work_struct *work)
switch (dp->state) {
case DP_STATE_ENTER:
ret = typec_altmode_enter(dp->alt, NULL);
- if (ret)
+ if (ret && ret != -EBUSY)
dev_err(&dp->alt->dev, "failed to enter mode\n");
break;
case DP_STATE_UPDATE:
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index 02655694f200..35eec707cb51 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1449,6 +1449,21 @@ void typec_set_pwr_opmode(struct typec_port *port,
EXPORT_SYMBOL_GPL(typec_set_pwr_opmode);
/**
+ * typec_find_pwr_opmode - Get the typec power operation mode capability
+ * @name: power operation mode string
+ *
+ * This routine is used to find the typec_pwr_opmode by its string @name.
+ *
+ * Returns typec_pwr_opmode if success, otherwise negative error code.
+ */
+int typec_find_pwr_opmode(const char *name)
+{
+ return match_string(typec_pwr_opmodes,
+ ARRAY_SIZE(typec_pwr_opmodes), name);
+}
+EXPORT_SYMBOL_GPL(typec_find_pwr_opmode);
+
+/**
* typec_find_orientation - Convert orientation string to enum typec_orientation
* @name: Orientation string
*
diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c
index 323dfa8160ab..f633ec15b1a1 100644
--- a/drivers/usb/typec/hd3ss3220.c
+++ b/drivers/usb/typec/hd3ss3220.c
@@ -155,7 +155,7 @@ static int hd3ss3220_probe(struct i2c_client *client,
{
struct typec_capability typec_cap = { };
struct hd3ss3220 *hd3ss3220;
- struct fwnode_handle *connector;
+ struct fwnode_handle *connector, *ep;
int ret;
unsigned int data;
@@ -173,11 +173,21 @@ static int hd3ss3220_probe(struct i2c_client *client,
hd3ss3220_set_source_pref(hd3ss3220,
HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT);
+ /* For backward compatibility check the connector child node first */
connector = device_get_named_child_node(hd3ss3220->dev, "connector");
- if (!connector)
- return -ENODEV;
+ if (connector) {
+ hd3ss3220->role_sw = fwnode_usb_role_switch_get(connector);
+ } else {
+ ep = fwnode_graph_get_next_endpoint(dev_fwnode(hd3ss3220->dev), NULL);
+ if (!ep)
+ return -ENODEV;
+ connector = fwnode_graph_get_remote_port_parent(ep);
+ fwnode_handle_put(ep);
+ if (!connector)
+ return -ENODEV;
+ hd3ss3220->role_sw = usb_role_switch_get(hd3ss3220->dev);
+ }
- hd3ss3220->role_sw = fwnode_usb_role_switch_get(connector);
if (IS_ERR(hd3ss3220->role_sw)) {
ret = PTR_ERR(hd3ss3220->role_sw);
goto err_put_fwnode;
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index a4dbd11f8ee2..edead555835e 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -11,6 +11,7 @@ config TYPEC_MUX_PI3USB30532
config TYPEC_MUX_INTEL_PMC
tristate "Intel PMC mux control"
+ depends on ACPI
depends on INTEL_SCU_IPC
select USB_ROLE_SWITCH
help
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index 676b525c2a66..d7f63b74c6b1 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -80,10 +80,48 @@ enum {
#define PMC_USB_DP_HPD_LVL BIT(4)
#define PMC_USB_DP_HPD_IRQ BIT(5)
+/*
+ * Input Output Manager (IOM) PORT STATUS
+ */
+#define IOM_PORT_STATUS_OFFSET 0x560
+
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_MASK GENMASK(9, 6)
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_SHIFT 6
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_USB 0x03
+/* activity type: Safe Mode */
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_SAFE_MODE 0x04
+/* activity type: Display Port */
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_DP 0x05
+/* activity type: Display Port Multi Function Device */
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_DP_MFD 0x06
+/* activity type: Thunderbolt */
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_TBT 0x07
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_ALT_MODE_USB 0x0c
+#define IOM_PORT_STATUS_ACTIVITY_TYPE_ALT_MODE_TBT_USB 0x0d
+/* Upstream Facing Port Information */
+#define IOM_PORT_STATUS_UFP BIT(10)
+/* Display Port Hot Plug Detect status */
+#define IOM_PORT_STATUS_DHPD_HPD_STATUS_MASK GENMASK(13, 12)
+#define IOM_PORT_STATUS_DHPD_HPD_STATUS_SHIFT 12
+#define IOM_PORT_STATUS_DHPD_HPD_STATUS_ASSERT 0x01
+#define IOM_PORT_STATUS_DHPD_HPD_SOURCE_TBT BIT(14)
+#define IOM_PORT_STATUS_CONNECTED BIT(31)
+
+#define IOM_PORT_ACTIVITY_IS(_status_, _type_) \
+ ((((_status_) & IOM_PORT_STATUS_ACTIVITY_TYPE_MASK) >> \
+ IOM_PORT_STATUS_ACTIVITY_TYPE_SHIFT) == \
+ (IOM_PORT_STATUS_ACTIVITY_TYPE_##_type_))
+
+#define IOM_PORT_HPD_ASSERTED(_status_) \
+ ((((_status_) & IOM_PORT_STATUS_DHPD_HPD_STATUS_MASK) >> \
+ IOM_PORT_STATUS_DHPD_HPD_STATUS_SHIFT) & \
+ IOM_PORT_STATUS_DHPD_HPD_STATUS_ASSERT)
+
struct pmc_usb;
struct pmc_usb_port {
int num;
+ u32 iom_status;
struct pmc_usb *pmc;
struct typec_mux *typec_mux;
struct typec_switch *typec_sw;
@@ -104,8 +142,21 @@ struct pmc_usb {
struct device *dev;
struct intel_scu_ipc_dev *ipc;
struct pmc_usb_port *port;
+ struct acpi_device *iom_adev;
+ void __iomem *iom_base;
};
+static void update_port_status(struct pmc_usb_port *port)
+{
+ u8 port_num;
+
+ /* SoC expects the USB Type-C port numbers to start with 0 */
+ port_num = port->usb3_port - 1;
+
+ port->iom_status = readl(port->pmc->iom_base + IOM_PORT_STATUS_OFFSET +
+ port_num * sizeof(u32));
+}
+
static int sbu_orientation(struct pmc_usb_port *port)
{
if (port->sbu_orientation)
@@ -148,18 +199,17 @@ static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
}
static int
-pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_mux_state *state)
+pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_displayport_data *dp)
{
- struct typec_displayport_data *data = state->data;
u8 msg[2] = { };
msg[0] = PMC_USB_DP_HPD;
msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
- if (data->status & DP_STATUS_IRQ_HPD)
+ if (dp->status & DP_STATUS_IRQ_HPD)
msg[1] = PMC_USB_DP_HPD_IRQ;
- if (data->status & DP_STATUS_HPD_STATE)
+ if (dp->status & DP_STATUS_HPD_STATE)
msg[1] |= PMC_USB_DP_HPD_LVL;
return pmc_usb_command(port, msg, sizeof(msg));
@@ -172,8 +222,15 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
struct altmode_req req = { };
int ret;
- if (data->status & DP_STATUS_IRQ_HPD)
- return pmc_usb_mux_dp_hpd(port, state);
+ if (IOM_PORT_ACTIVITY_IS(port->iom_status, DP) ||
+ IOM_PORT_ACTIVITY_IS(port->iom_status, DP_MFD)) {
+ if (IOM_PORT_HPD_ASSERTED(port->iom_status) &&
+ (!(data->status & DP_STATUS_IRQ_HPD) &&
+ data->status & DP_STATUS_HPD_STATE))
+ return 0;
+
+ return pmc_usb_mux_dp_hpd(port, state->data);
+ }
req.usage = PMC_USB_ALT_MODE;
req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
@@ -189,8 +246,8 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
if (ret)
return ret;
- if (data->status & DP_STATUS_HPD_STATE)
- return pmc_usb_mux_dp_hpd(port, state);
+ if (data->status & (DP_STATUS_IRQ_HPD | DP_STATUS_HPD_STATE))
+ return pmc_usb_mux_dp_hpd(port, state->data);
return 0;
}
@@ -202,6 +259,10 @@ pmc_usb_mux_tbt(struct pmc_usb_port *port, struct typec_mux_state *state)
u8 cable_speed = TBT_CABLE_SPEED(data->cable_mode);
struct altmode_req req = { };
+ if (IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) ||
+ IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB))
+ return 0;
+
req.usage = PMC_USB_ALT_MODE;
req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
req.mode_type = PMC_USB_MODE_TYPE_TBT << PMC_USB_MODE_TYPE_SHIFT;
@@ -233,6 +294,10 @@ pmc_usb_mux_usb4(struct pmc_usb_port *port, struct typec_mux_state *state)
struct altmode_req req = { };
u8 cable_speed;
+ if (IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) ||
+ IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB))
+ return 0;
+
req.usage = PMC_USB_ALT_MODE;
req.usage |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
req.mode_type = PMC_USB_MODE_TYPE_TBT << PMC_USB_MODE_TYPE_SHIFT;
@@ -267,34 +332,61 @@ static int pmc_usb_mux_safe_state(struct pmc_usb_port *port)
{
u8 msg;
+ if (IOM_PORT_ACTIVITY_IS(port->iom_status, SAFE_MODE))
+ return 0;
+
msg = PMC_USB_SAFE_MODE;
msg |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
return pmc_usb_command(port, &msg, sizeof(msg));
}
-static int pmc_usb_connect(struct pmc_usb_port *port)
+static int pmc_usb_disconnect(struct pmc_usb_port *port)
{
+ struct typec_displayport_data data = { };
u8 msg[2];
- msg[0] = PMC_USB_CONNECT;
+ if (!(port->iom_status & IOM_PORT_STATUS_CONNECTED))
+ return 0;
+
+ /* Clear DisplayPort HPD if it's still asserted. */
+ if (IOM_PORT_HPD_ASSERTED(port->iom_status))
+ pmc_usb_mux_dp_hpd(port, &data);
+
+ msg[0] = PMC_USB_DISCONNECT;
msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
msg[1] = port->usb2_port << PMC_USB_MSG_USB2_PORT_SHIFT;
- msg[1] |= hsl_orientation(port) << PMC_USB_MSG_ORI_HSL_SHIFT;
- msg[1] |= sbu_orientation(port) << PMC_USB_MSG_ORI_AUX_SHIFT;
return pmc_usb_command(port, msg, sizeof(msg));
}
-static int pmc_usb_disconnect(struct pmc_usb_port *port)
+static int pmc_usb_connect(struct pmc_usb_port *port, enum usb_role role)
{
+ u8 ufp = role == USB_ROLE_DEVICE ? 1 : 0;
u8 msg[2];
+ int ret;
- msg[0] = PMC_USB_DISCONNECT;
+ if (port->orientation == TYPEC_ORIENTATION_NONE)
+ return -EINVAL;
+
+ if (port->iom_status & IOM_PORT_STATUS_CONNECTED) {
+ if (port->role == role || port->role == USB_ROLE_NONE)
+ return 0;
+
+ /* Role swap */
+ ret = pmc_usb_disconnect(port);
+ if (ret)
+ return ret;
+ }
+
+ msg[0] = PMC_USB_CONNECT;
msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
msg[1] = port->usb2_port << PMC_USB_MSG_USB2_PORT_SHIFT;
+ msg[1] |= ufp << PMC_USB_MSG_UFP_SHIFT;
+ msg[1] |= hsl_orientation(port) << PMC_USB_MSG_ORI_HSL_SHIFT;
+ msg[1] |= sbu_orientation(port) << PMC_USB_MSG_ORI_AUX_SHIFT;
return pmc_usb_command(port, msg, sizeof(msg));
}
@@ -304,13 +396,15 @@ pmc_usb_mux_set(struct typec_mux *mux, struct typec_mux_state *state)
{
struct pmc_usb_port *port = typec_mux_get_drvdata(mux);
+ update_port_status(port);
+
if (port->orientation == TYPEC_ORIENTATION_NONE || port->role == USB_ROLE_NONE)
return 0;
if (state->mode == TYPEC_STATE_SAFE)
return pmc_usb_mux_safe_state(port);
if (state->mode == TYPEC_STATE_USB)
- return pmc_usb_connect(port);
+ return pmc_usb_connect(port, port->role);
if (state->alt) {
switch (state->alt->svid) {
@@ -325,7 +419,7 @@ pmc_usb_mux_set(struct typec_mux *mux, struct typec_mux_state *state)
/* REVISIT: Try with usb3_port set to 0? */
break;
case TYPEC_MODE_USB3:
- return pmc_usb_connect(port);
+ return pmc_usb_connect(port, port->role);
case TYPEC_MODE_USB4:
return pmc_usb_mux_usb4(port, state);
}
@@ -339,38 +433,28 @@ static int pmc_usb_set_orientation(struct typec_switch *sw,
{
struct pmc_usb_port *port = typec_switch_get_drvdata(sw);
- if (port->orientation == orientation)
- return 0;
+ update_port_status(port);
port->orientation = orientation;
- if (port->role) {
- if (orientation == TYPEC_ORIENTATION_NONE)
- return pmc_usb_disconnect(port);
- else
- return pmc_usb_connect(port);
- }
-
return 0;
}
static int pmc_usb_set_role(struct usb_role_switch *sw, enum usb_role role)
{
struct pmc_usb_port *port = usb_role_switch_get_drvdata(sw);
+ int ret;
- if (port->role == role)
- return 0;
+ update_port_status(port);
- port->role = role;
+ if (role == USB_ROLE_NONE)
+ ret = pmc_usb_disconnect(port);
+ else
+ ret = pmc_usb_connect(port, role);
- if (port->orientation) {
- if (role == USB_ROLE_NONE)
- return pmc_usb_disconnect(port);
- else
- return pmc_usb_connect(port);
- }
+ port->role = role;
- return 0;
+ return ret;
}
static int pmc_usb_register_port(struct pmc_usb *pmc, int index,
@@ -444,6 +528,45 @@ err_unregister_switch:
return ret;
}
+static int is_memory(struct acpi_resource *res, void *data)
+{
+ struct resource r;
+
+ return !acpi_dev_resource_memory(res, &r);
+}
+
+static int pmc_usb_probe_iom(struct pmc_usb *pmc)
+{
+ struct list_head resource_list;
+ struct resource_entry *rentry;
+ struct acpi_device *adev;
+ int ret;
+
+ adev = acpi_dev_get_first_match_dev("INTC1072", NULL, -1);
+ if (!adev)
+ return -ENODEV;
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
+ if (ret < 0)
+ return ret;
+
+ rentry = list_first_entry_or_null(&resource_list, struct resource_entry, node);
+ if (rentry)
+ pmc->iom_base = devm_ioremap_resource(pmc->dev, rentry->res);
+
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (!pmc->iom_base) {
+ put_device(&adev->dev);
+ return -ENOMEM;
+ }
+
+ pmc->iom_adev = adev;
+
+ return 0;
+}
+
static int pmc_usb_probe(struct platform_device *pdev)
{
struct fwnode_handle *fwnode = NULL;
@@ -458,6 +581,12 @@ static int pmc_usb_probe(struct platform_device *pdev)
device_for_each_child_node(&pdev->dev, fwnode)
pmc->num_ports++;
+ /* The IOM microcontroller has a limitation of max 4 ports. */
+ if (pmc->num_ports > 4) {
+ dev_err(&pdev->dev, "driver limited to 4 ports\n");
+ return -ERANGE;
+ }
+
pmc->port = devm_kcalloc(&pdev->dev, pmc->num_ports,
sizeof(struct pmc_usb_port), GFP_KERNEL);
if (!pmc->port)
@@ -469,6 +598,10 @@ static int pmc_usb_probe(struct platform_device *pdev)
pmc->dev = &pdev->dev;
+ ret = pmc_usb_probe_iom(pmc);
+ if (ret)
+ return ret;
+
/*
* For every physical USB connector (USB2 and USB3 combo) there is a
* child ACPI device node under the PMC mux ACPI device object.
@@ -494,6 +627,8 @@ err_remove_ports:
usb_role_switch_unregister(pmc->port[i].usb_sw);
}
+ put_device(&pmc->iom_adev->dev);
+
return ret;
}
@@ -508,6 +643,8 @@ static int pmc_usb_remove(struct platform_device *pdev)
usb_role_switch_unregister(pmc->port[i].usb_sw);
}
+ put_device(&pmc->iom_adev->dev);
+
return 0;
}
diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c
new file mode 100644
index 000000000000..a0454a80c4a2
--- /dev/null
+++ b/drivers/usb/typec/qcom-pmic-typec.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/usb/role.h>
+#include <linux/usb/typec_mux.h>
+
+#define TYPEC_MISC_STATUS 0xb
+#define CC_ATTACHED BIT(0)
+#define CC_ORIENTATION BIT(1)
+#define SNK_SRC_MODE BIT(6)
+#define TYPEC_MODE_CFG 0x44
+#define TYPEC_DISABLE_CMD BIT(0)
+#define EN_SNK_ONLY BIT(1)
+#define EN_SRC_ONLY BIT(2)
+#define TYPEC_VCONN_CONTROL 0x46
+#define VCONN_EN_SRC BIT(0)
+#define VCONN_EN_VAL BIT(1)
+#define TYPEC_EXIT_STATE_CFG 0x50
+#define SEL_SRC_UPPER_REF BIT(2)
+#define TYPEC_INTR_EN_CFG_1 0x5e
+#define TYPEC_INTR_EN_CFG_1_MASK GENMASK(7, 0)
+
+struct qcom_pmic_typec {
+ struct device *dev;
+ struct regmap *regmap;
+ u32 base;
+
+ struct typec_port *port;
+ struct usb_role_switch *role_sw;
+
+ struct regulator *vbus_reg;
+ bool vbus_enabled;
+};
+
+static void qcom_pmic_typec_enable_vbus_regulator(struct qcom_pmic_typec
+ *qcom_usb, bool enable)
+{
+ int ret;
+
+ if (enable == qcom_usb->vbus_enabled)
+ return;
+
+ if (enable) {
+ ret = regulator_enable(qcom_usb->vbus_reg);
+ if (ret)
+ return;
+ } else {
+ ret = regulator_disable(qcom_usb->vbus_reg);
+ if (ret)
+ return;
+ }
+ qcom_usb->vbus_enabled = enable;
+}
+
+static void qcom_pmic_typec_check_connection(struct qcom_pmic_typec *qcom_usb)
+{
+ enum typec_orientation orientation;
+ enum usb_role role;
+ unsigned int stat;
+ bool enable_vbus;
+
+ regmap_read(qcom_usb->regmap, qcom_usb->base + TYPEC_MISC_STATUS,
+ &stat);
+
+ if (stat & CC_ATTACHED) {
+ orientation = (stat & CC_ORIENTATION) ?
+ TYPEC_ORIENTATION_REVERSE :
+ TYPEC_ORIENTATION_NORMAL;
+ typec_set_orientation(qcom_usb->port, orientation);
+
+ role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE;
+ if (role == USB_ROLE_HOST)
+ enable_vbus = true;
+ else
+ enable_vbus = false;
+ } else {
+ role = USB_ROLE_NONE;
+ enable_vbus = false;
+ }
+
+ qcom_pmic_typec_enable_vbus_regulator(qcom_usb, enable_vbus);
+ usb_role_switch_set_role(qcom_usb->role_sw, role);
+}
+
+static irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb)
+{
+ struct qcom_pmic_typec *qcom_usb = _qcom_usb;
+
+ qcom_pmic_typec_check_connection(qcom_usb);
+ return IRQ_HANDLED;
+}
+
+static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb,
+ enum typec_port_type type)
+{
+ u8 mode = 0;
+
+ regmap_update_bits(qcom_usb->regmap,
+ qcom_usb->base + TYPEC_INTR_EN_CFG_1,
+ TYPEC_INTR_EN_CFG_1_MASK, 0);
+
+ if (type == TYPEC_PORT_SRC)
+ mode = EN_SRC_ONLY;
+ else if (type == TYPEC_PORT_SNK)
+ mode = EN_SNK_ONLY;
+
+ regmap_update_bits(qcom_usb->regmap, qcom_usb->base + TYPEC_MODE_CFG,
+ EN_SNK_ONLY | EN_SRC_ONLY, mode);
+
+ regmap_update_bits(qcom_usb->regmap,
+ qcom_usb->base + TYPEC_VCONN_CONTROL,
+ VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC);
+ regmap_update_bits(qcom_usb->regmap,
+ qcom_usb->base + TYPEC_EXIT_STATE_CFG,
+ SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF);
+}
+
+static int qcom_pmic_typec_probe(struct platform_device *pdev)
+{
+ struct qcom_pmic_typec *qcom_usb;
+ struct device *dev = &pdev->dev;
+ struct fwnode_handle *fwnode;
+ struct typec_capability cap;
+ const char *buf;
+ int ret, irq, role;
+ u32 reg;
+
+ ret = device_property_read_u32(dev, "reg", &reg);
+ if (ret < 0) {
+ dev_err(dev, "missing base address\n");
+ return ret;
+ }
+
+ qcom_usb = devm_kzalloc(dev, sizeof(*qcom_usb), GFP_KERNEL);
+ if (!qcom_usb)
+ return -ENOMEM;
+
+ qcom_usb->dev = dev;
+ qcom_usb->base = reg;
+
+ qcom_usb->regmap = dev_get_regmap(dev->parent, NULL);
+ if (!qcom_usb->regmap) {
+ dev_err(dev, "Failed to get regmap\n");
+ return -EINVAL;
+ }
+
+ qcom_usb->vbus_reg = devm_regulator_get(qcom_usb->dev, "usb_vbus");
+ if (IS_ERR(qcom_usb->vbus_reg))
+ return PTR_ERR(qcom_usb->vbus_reg);
+
+ fwnode = device_get_named_child_node(dev, "connector");
+ if (!fwnode)
+ return -EINVAL;
+
+ ret = fwnode_property_read_string(fwnode, "power-role", &buf);
+ if (!ret) {
+ role = typec_find_port_power_role(buf);
+ if (role < 0)
+ role = TYPEC_PORT_SNK;
+ } else {
+ role = TYPEC_PORT_SNK;
+ }
+ cap.type = role;
+
+ ret = fwnode_property_read_string(fwnode, "data-role", &buf);
+ if (!ret) {
+ role = typec_find_port_data_role(buf);
+ if (role < 0)
+ role = TYPEC_PORT_UFP;
+ } else {
+ role = TYPEC_PORT_UFP;
+ }
+ cap.data = role;
+
+ cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+ cap.fwnode = fwnode;
+ qcom_usb->port = typec_register_port(dev, &cap);
+ if (IS_ERR(qcom_usb->port)) {
+ ret = PTR_ERR(qcom_usb->port);
+ dev_err(dev, "Failed to register type c port %d\n", ret);
+ goto err_put_node;
+ }
+ fwnode_handle_put(fwnode);
+
+ qcom_usb->role_sw = fwnode_usb_role_switch_get(dev_fwnode(qcom_usb->dev));
+ if (IS_ERR(qcom_usb->role_sw)) {
+ if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER)
+ dev_err(dev, "failed to get role switch\n");
+ ret = PTR_ERR(qcom_usb->role_sw);
+ goto err_typec_port;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ goto err_usb_role_sw;
+
+ ret = devm_request_threaded_irq(qcom_usb->dev, irq, NULL,
+ qcom_pmic_typec_interrupt, IRQF_ONESHOT,
+ "qcom-pmic-typec", qcom_usb);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not request IRQ\n");
+ goto err_usb_role_sw;
+ }
+
+ platform_set_drvdata(pdev, qcom_usb);
+ qcom_pmic_typec_typec_hw_init(qcom_usb, cap.type);
+ qcom_pmic_typec_check_connection(qcom_usb);
+
+ return 0;
+
+err_usb_role_sw:
+ usb_role_switch_put(qcom_usb->role_sw);
+err_typec_port:
+ typec_unregister_port(qcom_usb->port);
+err_put_node:
+ fwnode_handle_put(fwnode);
+
+ return ret;
+}
+
+static int qcom_pmic_typec_remove(struct platform_device *pdev)
+{
+ struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev);
+
+ usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE);
+ qcom_pmic_typec_enable_vbus_regulator(qcom_usb, 0);
+
+ typec_unregister_port(qcom_usb->port);
+ usb_role_switch_put(qcom_usb->role_sw);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_pmic_typec_table[] = {
+ { .compatible = "qcom,pm8150b-usb-typec" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
+
+static struct platform_driver qcom_pmic_typec = {
+ .driver = {
+ .name = "qcom,pmic-typec",
+ .of_match_table = qcom_pmic_typec_table,
+ },
+ .probe = qcom_pmic_typec_probe,
+ .remove = qcom_pmic_typec_remove,
+};
+module_platform_driver(qcom_pmic_typec);
+
+MODULE_DESCRIPTION("QCOM PMIC USB type C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c
new file mode 100644
index 000000000000..ce0bd7b3ad88
--- /dev/null
+++ b/drivers/usb/typec/stusb160x.c
@@ -0,0 +1,875 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * STMicroelectronics STUSB160x Type-C controller family driver
+ *
+ * Copyright (C) 2020, STMicroelectronics
+ * Author(s): Amelie Delaunay <amelie.delaunay@st.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/role.h>
+#include <linux/usb/typec.h>
+
+#define STUSB160X_ALERT_STATUS 0x0B /* RC */
+#define STUSB160X_ALERT_STATUS_MASK_CTRL 0x0C /* RW */
+#define STUSB160X_CC_CONNECTION_STATUS_TRANS 0x0D /* RC */
+#define STUSB160X_CC_CONNECTION_STATUS 0x0E /* RO */
+#define STUSB160X_MONITORING_STATUS_TRANS 0x0F /* RC */
+#define STUSB160X_MONITORING_STATUS 0x10 /* RO */
+#define STUSB160X_CC_OPERATION_STATUS 0x11 /* RO */
+#define STUSB160X_HW_FAULT_STATUS_TRANS 0x12 /* RC */
+#define STUSB160X_HW_FAULT_STATUS 0x13 /* RO */
+#define STUSB160X_CC_CAPABILITY_CTRL 0x18 /* RW */
+#define STUSB160X_CC_VCONN_SWITCH_CTRL 0x1E /* RW */
+#define STUSB160X_VCONN_MONITORING_CTRL 0x20 /* RW */
+#define STUSB160X_VBUS_MONITORING_RANGE_CTRL 0x22 /* RW */
+#define STUSB160X_RESET_CTRL 0x23 /* RW */
+#define STUSB160X_VBUS_DISCHARGE_TIME_CTRL 0x25 /* RW */
+#define STUSB160X_VBUS_DISCHARGE_STATUS 0x26 /* RO */
+#define STUSB160X_VBUS_ENABLE_STATUS 0x27 /* RO */
+#define STUSB160X_CC_POWER_MODE_CTRL 0x28 /* RW */
+#define STUSB160X_VBUS_MONITORING_CTRL 0x2E /* RW */
+#define STUSB1600_REG_MAX 0x2F /* RO - Reserved */
+
+/* STUSB160X_ALERT_STATUS/STUSB160X_ALERT_STATUS_MASK_CTRL bitfields */
+#define STUSB160X_HW_FAULT BIT(4)
+#define STUSB160X_MONITORING BIT(5)
+#define STUSB160X_CC_CONNECTION BIT(6)
+#define STUSB160X_ALL_ALERTS GENMASK(6, 4)
+
+/* STUSB160X_CC_CONNECTION_STATUS_TRANS bitfields */
+#define STUSB160X_CC_ATTACH_TRANS BIT(0)
+
+/* STUSB160X_CC_CONNECTION_STATUS bitfields */
+#define STUSB160X_CC_ATTACH BIT(0)
+#define STUSB160X_CC_VCONN_SUPPLY BIT(1)
+#define STUSB160X_CC_DATA_ROLE(s) (!!((s) & BIT(2)))
+#define STUSB160X_CC_POWER_ROLE(s) (!!((s) & BIT(3)))
+#define STUSB160X_CC_ATTACHED_MODE GENMASK(7, 5)
+
+/* STUSB160X_MONITORING_STATUS_TRANS bitfields */
+#define STUSB160X_VCONN_PRESENCE_TRANS BIT(0)
+#define STUSB160X_VBUS_PRESENCE_TRANS BIT(1)
+#define STUSB160X_VBUS_VSAFE0V_TRANS BIT(2)
+#define STUSB160X_VBUS_VALID_TRANS BIT(3)
+
+/* STUSB160X_MONITORING_STATUS bitfields */
+#define STUSB160X_VCONN_PRESENCE BIT(0)
+#define STUSB160X_VBUS_PRESENCE BIT(1)
+#define STUSB160X_VBUS_VSAFE0V BIT(2)
+#define STUSB160X_VBUS_VALID BIT(3)
+
+/* STUSB160X_CC_OPERATION_STATUS bitfields */
+#define STUSB160X_TYPEC_FSM_STATE GENMASK(4, 0)
+#define STUSB160X_SINK_POWER_STATE GENMASK(6, 5)
+#define STUSB160X_CC_ATTACHED BIT(7)
+
+/* STUSB160X_HW_FAULT_STATUS_TRANS bitfields */
+#define STUSB160X_VCONN_SW_OVP_FAULT_TRANS BIT(0)
+#define STUSB160X_VCONN_SW_OCP_FAULT_TRANS BIT(1)
+#define STUSB160X_VCONN_SW_RVP_FAULT_TRANS BIT(2)
+#define STUSB160X_VPU_VALID_TRANS BIT(4)
+#define STUSB160X_VPU_OVP_FAULT_TRANS BIT(5)
+#define STUSB160X_THERMAL_FAULT BIT(7)
+
+/* STUSB160X_HW_FAULT_STATUS bitfields */
+#define STUSB160X_VCONN_SW_OVP_FAULT_CC2 BIT(0)
+#define STUSB160X_VCONN_SW_OVP_FAULT_CC1 BIT(1)
+#define STUSB160X_VCONN_SW_OCP_FAULT_CC2 BIT(2)
+#define STUSB160X_VCONN_SW_OCP_FAULT_CC1 BIT(3)
+#define STUSB160X_VCONN_SW_RVP_FAULT_CC2 BIT(4)
+#define STUSB160X_VCONN_SW_RVP_FAULT_CC1 BIT(5)
+#define STUSB160X_VPU_VALID BIT(6)
+#define STUSB160X_VPU_OVP_FAULT BIT(7)
+
+/* STUSB160X_CC_CAPABILITY_CTRL bitfields */
+#define STUSB160X_CC_VCONN_SUPPLY_EN BIT(0)
+#define STUSB160X_CC_VCONN_DISCHARGE_EN BIT(4)
+#define STUSB160X_CC_CURRENT_ADVERTISED GENMASK(7, 6)
+
+/* STUSB160X_VCONN_SWITCH_CTRL bitfields */
+#define STUSB160X_CC_VCONN_SWITCH_ILIM GENMASK(3, 0)
+
+/* STUSB160X_VCONN_MONITORING_CTRL bitfields */
+#define STUSB160X_VCONN_UVLO_THRESHOLD BIT(6)
+#define STUSB160X_VCONN_MONITORING_EN BIT(7)
+
+/* STUSB160X_VBUS_MONITORING_RANGE_CTRL bitfields */
+#define STUSB160X_SHIFT_LOW_VBUS_LIMIT GENMASK(3, 0)
+#define STUSB160X_SHIFT_HIGH_VBUS_LIMIT GENMASK(7, 4)
+
+/* STUSB160X_RESET_CTRL bitfields */
+#define STUSB160X_SW_RESET_EN BIT(0)
+
+/* STUSB160X_VBUS_DISCHARGE_TIME_CTRL bitfields */
+#define STUSBXX02_VBUS_DISCHARGE_TIME_TO_PDO GENMASK(3, 0)
+#define STUSB160X_VBUS_DISCHARGE_TIME_TO_0V GENMASK(7, 4)
+
+/* STUSB160X_VBUS_DISCHARGE_STATUS bitfields */
+#define STUSB160X_VBUS_DISCHARGE_EN BIT(7)
+
+/* STUSB160X_VBUS_ENABLE_STATUS bitfields */
+#define STUSB160X_VBUS_SOURCE_EN BIT(0)
+#define STUSB160X_VBUS_SINK_EN BIT(1)
+
+/* STUSB160X_CC_POWER_MODE_CTRL bitfields */
+#define STUSB160X_CC_POWER_MODE GENMASK(2, 0)
+
+/* STUSB160X_VBUS_MONITORING_CTRL bitfields */
+#define STUSB160X_VDD_UVLO_DISABLE BIT(0)
+#define STUSB160X_VBUS_VSAFE0V_THRESHOLD GENMASK(2, 1)
+#define STUSB160X_VBUS_RANGE_DISABLE BIT(4)
+#define STUSB160X_VDD_OVLO_DISABLE BIT(6)
+
+enum stusb160x_pwr_mode {
+ SOURCE_WITH_ACCESSORY,
+ SINK_WITH_ACCESSORY,
+ SINK_WITHOUT_ACCESSORY,
+ DUAL_WITH_ACCESSORY,
+ DUAL_WITH_ACCESSORY_AND_TRY_SRC,
+ DUAL_WITH_ACCESSORY_AND_TRY_SNK,
+};
+
+enum stusb160x_attached_mode {
+ NO_DEVICE_ATTACHED,
+ SINK_ATTACHED,
+ SOURCE_ATTACHED,
+ DEBUG_ACCESSORY_ATTACHED,
+ AUDIO_ACCESSORY_ATTACHED,
+};
+
+struct stusb160x {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regulator *vdd_supply;
+ struct regulator *vsys_supply;
+ struct regulator *vconn_supply;
+ struct regulator *main_supply;
+
+ struct typec_port *port;
+ struct typec_capability capability;
+ struct typec_partner *partner;
+
+ enum typec_port_type port_type;
+ enum typec_pwr_opmode pwr_opmode;
+ bool vbus_on;
+
+ struct usb_role_switch *role_sw;
+};
+
+static bool stusb160x_reg_writeable(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case STUSB160X_ALERT_STATUS_MASK_CTRL:
+ case STUSB160X_CC_CAPABILITY_CTRL:
+ case STUSB160X_CC_VCONN_SWITCH_CTRL:
+ case STUSB160X_VCONN_MONITORING_CTRL:
+ case STUSB160X_VBUS_MONITORING_RANGE_CTRL:
+ case STUSB160X_RESET_CTRL:
+ case STUSB160X_VBUS_DISCHARGE_TIME_CTRL:
+ case STUSB160X_CC_POWER_MODE_CTRL:
+ case STUSB160X_VBUS_MONITORING_CTRL:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool stusb160x_reg_readable(struct device *dev, unsigned int reg)
+{
+ if (reg <= 0x0A ||
+ (reg >= 0x14 && reg <= 0x17) ||
+ (reg >= 0x19 && reg <= 0x1D) ||
+ (reg >= 0x29 && reg <= 0x2D) ||
+ (reg == 0x1F || reg == 0x21 || reg == 0x24 || reg == 0x2F))
+ return false;
+ else
+ return true;
+}
+
+static bool stusb160x_reg_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case STUSB160X_ALERT_STATUS:
+ case STUSB160X_CC_CONNECTION_STATUS_TRANS:
+ case STUSB160X_CC_CONNECTION_STATUS:
+ case STUSB160X_MONITORING_STATUS_TRANS:
+ case STUSB160X_MONITORING_STATUS:
+ case STUSB160X_CC_OPERATION_STATUS:
+ case STUSB160X_HW_FAULT_STATUS_TRANS:
+ case STUSB160X_HW_FAULT_STATUS:
+ case STUSB160X_VBUS_DISCHARGE_STATUS:
+ case STUSB160X_VBUS_ENABLE_STATUS:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool stusb160x_reg_precious(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case STUSB160X_ALERT_STATUS:
+ case STUSB160X_CC_CONNECTION_STATUS_TRANS:
+ case STUSB160X_MONITORING_STATUS_TRANS:
+ case STUSB160X_HW_FAULT_STATUS_TRANS:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config stusb1600_regmap_config = {
+ .reg_bits = 8,
+ .reg_stride = 1,
+ .val_bits = 8,
+ .max_register = STUSB1600_REG_MAX,
+ .writeable_reg = stusb160x_reg_writeable,
+ .readable_reg = stusb160x_reg_readable,
+ .volatile_reg = stusb160x_reg_volatile,
+ .precious_reg = stusb160x_reg_precious,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static bool stusb160x_get_vconn(struct stusb160x *chip)
+{
+ u32 val;
+ int ret;
+
+ ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val);
+ if (ret) {
+ dev_err(chip->dev, "Unable to get Vconn status: %d\n", ret);
+ return false;
+ }
+
+ return !!FIELD_GET(STUSB160X_CC_VCONN_SUPPLY_EN, val);
+}
+
+static int stusb160x_set_vconn(struct stusb160x *chip, bool on)
+{
+ int ret;
+
+ /* Manage VCONN input supply */
+ if (chip->vconn_supply) {
+ if (on) {
+ ret = regulator_enable(chip->vconn_supply);
+ if (ret) {
+ dev_err(chip->dev,
+ "failed to enable vconn supply: %d\n",
+ ret);
+ return ret;
+ }
+ } else {
+ regulator_disable(chip->vconn_supply);
+ }
+ }
+
+ /* Manage VCONN monitoring and power path */
+ ret = regmap_update_bits(chip->regmap, STUSB160X_VCONN_MONITORING_CTRL,
+ STUSB160X_VCONN_MONITORING_EN,
+ on ? STUSB160X_VCONN_MONITORING_EN : 0);
+ if (ret)
+ goto vconn_reg_disable;
+
+ return 0;
+
+vconn_reg_disable:
+ if (chip->vconn_supply && on)
+ regulator_disable(chip->vconn_supply);
+
+ return ret;
+}
+
+static enum typec_pwr_opmode stusb160x_get_pwr_opmode(struct stusb160x *chip)
+{
+ u32 val;
+ int ret;
+
+ ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val);
+ if (ret) {
+ dev_err(chip->dev, "Unable to get pwr opmode: %d\n", ret);
+ return TYPEC_PWR_MODE_USB;
+ }
+
+ return FIELD_GET(STUSB160X_CC_CURRENT_ADVERTISED, val);
+}
+
+static enum typec_accessory stusb160x_get_accessory(u32 status)
+{
+ enum stusb160x_attached_mode mode;
+
+ mode = FIELD_GET(STUSB160X_CC_ATTACHED_MODE, status);
+
+ switch (mode) {
+ case DEBUG_ACCESSORY_ATTACHED:
+ return TYPEC_ACCESSORY_DEBUG;
+ case AUDIO_ACCESSORY_ATTACHED:
+ return TYPEC_ACCESSORY_AUDIO;
+ default:
+ return TYPEC_ACCESSORY_NONE;
+ }
+}
+
+static enum typec_role stusb160x_get_vconn_role(u32 status)
+{
+ if (FIELD_GET(STUSB160X_CC_VCONN_SUPPLY, status))
+ return TYPEC_SOURCE;
+
+ return TYPEC_SINK;
+}
+
+static void stusb160x_set_data_role(struct stusb160x *chip,
+ enum typec_data_role data_role,
+ bool attached)
+{
+ enum usb_role usb_role = USB_ROLE_NONE;
+
+ if (attached) {
+ if (data_role == TYPEC_HOST)
+ usb_role = USB_ROLE_HOST;
+ else
+ usb_role = USB_ROLE_DEVICE;
+ }
+
+ usb_role_switch_set_role(chip->role_sw, usb_role);
+ typec_set_data_role(chip->port, data_role);
+}
+
+static int stusb160x_attach(struct stusb160x *chip, u32 status)
+{
+ struct typec_partner_desc desc;
+ int ret;
+
+ if ((STUSB160X_CC_POWER_ROLE(status) == TYPEC_SOURCE) &&
+ chip->vdd_supply) {
+ ret = regulator_enable(chip->vdd_supply);
+ if (ret) {
+ dev_err(chip->dev,
+ "Failed to enable Vbus supply: %d\n", ret);
+ return ret;
+ }
+ chip->vbus_on = true;
+ }
+
+ desc.usb_pd = false;
+ desc.accessory = stusb160x_get_accessory(status);
+ desc.identity = NULL;
+
+ chip->partner = typec_register_partner(chip->port, &desc);
+ if (IS_ERR(chip->partner)) {
+ ret = PTR_ERR(chip->partner);
+ goto vbus_disable;
+ }
+
+ typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status));
+ typec_set_pwr_opmode(chip->port, stusb160x_get_pwr_opmode(chip));
+ typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status));
+ stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), true);
+
+ return 0;
+
+vbus_disable:
+ if (chip->vbus_on) {
+ regulator_disable(chip->vdd_supply);
+ chip->vbus_on = false;
+ }
+
+ return ret;
+}
+
+static void stusb160x_detach(struct stusb160x *chip, u32 status)
+{
+ typec_unregister_partner(chip->partner);
+ chip->partner = NULL;
+
+ typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status));
+ typec_set_pwr_opmode(chip->port, TYPEC_PWR_MODE_USB);
+ typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status));
+ stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), false);
+
+ if (chip->vbus_on) {
+ regulator_disable(chip->vdd_supply);
+ chip->vbus_on = false;
+ }
+}
+
+static irqreturn_t stusb160x_irq_handler(int irq, void *data)
+{
+ struct stusb160x *chip = data;
+ u32 pending, trans, status;
+ int ret;
+
+ ret = regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &pending);
+ if (ret)
+ goto err;
+
+ if (pending & STUSB160X_CC_CONNECTION) {
+ ret = regmap_read(chip->regmap,
+ STUSB160X_CC_CONNECTION_STATUS_TRANS, &trans);
+ if (ret)
+ goto err;
+ ret = regmap_read(chip->regmap,
+ STUSB160X_CC_CONNECTION_STATUS, &status);
+ if (ret)
+ goto err;
+
+ if (trans & STUSB160X_CC_ATTACH_TRANS) {
+ if (status & STUSB160X_CC_ATTACH) {
+ ret = stusb160x_attach(chip, status);
+ if (ret)
+ goto err;
+ } else {
+ stusb160x_detach(chip, status);
+ }
+ }
+ }
+err:
+ return IRQ_HANDLED;
+}
+
+static int stusb160x_irq_init(struct stusb160x *chip, int irq)
+{
+ u32 status;
+ int ret;
+
+ ret = regmap_read(chip->regmap,
+ STUSB160X_CC_CONNECTION_STATUS, &status);
+ if (ret)
+ return ret;
+
+ if (status & STUSB160X_CC_ATTACH) {
+ ret = stusb160x_attach(chip, status);
+ if (ret)
+ dev_err(chip->dev, "attach failed: %d\n", ret);
+ }
+
+ ret = devm_request_threaded_irq(chip->dev, irq, NULL,
+ stusb160x_irq_handler, IRQF_ONESHOT,
+ dev_name(chip->dev), chip);
+ if (ret)
+ goto partner_unregister;
+
+ /* Unmask CC_CONNECTION events */
+ ret = regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL,
+ STUSB160X_CC_CONNECTION, 0);
+ if (ret)
+ goto partner_unregister;
+
+ return 0;
+
+partner_unregister:
+ if (chip->partner) {
+ typec_unregister_partner(chip->partner);
+ chip->partner = NULL;
+ }
+
+ return ret;
+}
+
+static int stusb160x_chip_init(struct stusb160x *chip)
+{
+ u32 val;
+ int ret;
+
+ /* Change the default Type-C power mode */
+ if (chip->port_type == TYPEC_PORT_SRC)
+ ret = regmap_update_bits(chip->regmap,
+ STUSB160X_CC_POWER_MODE_CTRL,
+ STUSB160X_CC_POWER_MODE,
+ SOURCE_WITH_ACCESSORY);
+ else if (chip->port_type == TYPEC_PORT_SNK)
+ ret = regmap_update_bits(chip->regmap,
+ STUSB160X_CC_POWER_MODE_CTRL,
+ STUSB160X_CC_POWER_MODE,
+ SINK_WITH_ACCESSORY);
+ else /* (chip->port_type == TYPEC_PORT_DRP) */
+ ret = regmap_update_bits(chip->regmap,
+ STUSB160X_CC_POWER_MODE_CTRL,
+ STUSB160X_CC_POWER_MODE,
+ DUAL_WITH_ACCESSORY);
+ if (ret)
+ return ret;
+
+ if (chip->port_type == TYPEC_PORT_SNK)
+ goto skip_src;
+
+ /* Change the default Type-C Source power operation mode capability */
+ ret = regmap_update_bits(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL,
+ STUSB160X_CC_CURRENT_ADVERTISED,
+ FIELD_PREP(STUSB160X_CC_CURRENT_ADVERTISED,
+ chip->pwr_opmode));
+ if (ret)
+ return ret;
+
+ /* Manage Type-C Source Vconn supply */
+ if (stusb160x_get_vconn(chip)) {
+ ret = stusb160x_set_vconn(chip, true);
+ if (ret)
+ return ret;
+ }
+
+skip_src:
+ /* Mask all events interrupts - to be unmasked with interrupt support */
+ ret = regmap_update_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL,
+ STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS);
+ if (ret)
+ return ret;
+
+ /* Read status at least once to clear any stale interrupts */
+ regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &val);
+ regmap_read(chip->regmap, STUSB160X_CC_CONNECTION_STATUS_TRANS, &val);
+ regmap_read(chip->regmap, STUSB160X_MONITORING_STATUS_TRANS, &val);
+ regmap_read(chip->regmap, STUSB160X_HW_FAULT_STATUS_TRANS, &val);
+
+ return 0;
+}
+
+static int stusb160x_get_fw_caps(struct stusb160x *chip,
+ struct fwnode_handle *fwnode)
+{
+ const char *cap_str;
+ int ret;
+
+ chip->capability.fwnode = fwnode;
+
+ /*
+ * Supported port type can be configured through device tree
+ * else it is read from chip registers in stusb160x_get_caps.
+ */
+ ret = fwnode_property_read_string(fwnode, "power-role", &cap_str);
+ if (!ret) {
+ chip->port_type = typec_find_port_power_role(cap_str);
+ if (chip->port_type < 0) {
+ ret = chip->port_type;
+ return ret;
+ }
+ }
+ chip->capability.type = chip->port_type;
+
+ /* Skip DRP/Source capabilities in case of Sink only */
+ if (chip->port_type == TYPEC_PORT_SNK)
+ return 0;
+
+ if (chip->port_type == TYPEC_PORT_DRP)
+ chip->capability.prefer_role = TYPEC_SINK;
+
+ /*
+ * Supported power operation mode can be configured through device tree
+ * else it is read from chip registers in stusb160x_get_caps.
+ */
+ ret = fwnode_property_read_string(fwnode, "power-opmode", &cap_str);
+ if (!ret) {
+ chip->pwr_opmode = typec_find_pwr_opmode(cap_str);
+ /* Power delivery not yet supported */
+ if (chip->pwr_opmode < 0 ||
+ chip->pwr_opmode == TYPEC_PWR_MODE_PD) {
+ ret = chip->pwr_opmode < 0 ? chip->pwr_opmode : -EINVAL;
+ dev_err(chip->dev, "bad power operation mode: %d\n",
+ chip->pwr_opmode);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int stusb160x_get_caps(struct stusb160x *chip)
+{
+ enum typec_port_type *type = &chip->capability.type;
+ enum typec_port_data *data = &chip->capability.data;
+ enum typec_accessory *accessory = chip->capability.accessory;
+ u32 val;
+ int ret;
+
+ chip->capability.revision = USB_TYPEC_REV_1_2;
+
+ ret = regmap_read(chip->regmap, STUSB160X_CC_POWER_MODE_CTRL, &val);
+ if (ret)
+ return ret;
+
+ switch (FIELD_GET(STUSB160X_CC_POWER_MODE, val)) {
+ case SOURCE_WITH_ACCESSORY:
+ *type = TYPEC_PORT_SRC;
+ *data = TYPEC_PORT_DFP;
+ *accessory++ = TYPEC_ACCESSORY_AUDIO;
+ *accessory++ = TYPEC_ACCESSORY_DEBUG;
+ break;
+ case SINK_WITH_ACCESSORY:
+ *type = TYPEC_PORT_SNK;
+ *data = TYPEC_PORT_UFP;
+ *accessory++ = TYPEC_ACCESSORY_AUDIO;
+ *accessory++ = TYPEC_ACCESSORY_DEBUG;
+ break;
+ case SINK_WITHOUT_ACCESSORY:
+ *type = TYPEC_PORT_SNK;
+ *data = TYPEC_PORT_UFP;
+ break;
+ case DUAL_WITH_ACCESSORY:
+ case DUAL_WITH_ACCESSORY_AND_TRY_SRC:
+ case DUAL_WITH_ACCESSORY_AND_TRY_SNK:
+ *type = TYPEC_PORT_DRP;
+ *data = TYPEC_PORT_DRD;
+ *accessory++ = TYPEC_ACCESSORY_AUDIO;
+ *accessory++ = TYPEC_ACCESSORY_DEBUG;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ chip->port_type = *type;
+ chip->pwr_opmode = stusb160x_get_pwr_opmode(chip);
+
+ return 0;
+}
+
+static const struct of_device_id stusb160x_of_match[] = {
+ { .compatible = "st,stusb1600", .data = &stusb1600_regmap_config},
+ {},
+};
+
+static int stusb160x_probe(struct i2c_client *client)
+{
+ struct stusb160x *chip;
+ const struct of_device_id *match;
+ struct regmap_config *regmap_config;
+ struct fwnode_handle *fwnode;
+ int ret;
+
+ chip = devm_kzalloc(&client->dev, sizeof(struct stusb160x), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, chip);
+
+ match = i2c_of_match_device(stusb160x_of_match, client);
+ regmap_config = (struct regmap_config *)match->data;
+ chip->regmap = devm_regmap_init_i2c(client, regmap_config);
+ if (IS_ERR(chip->regmap)) {
+ ret = PTR_ERR(chip->regmap);
+ dev_err(&client->dev,
+ "Failed to allocate register map:%d\n", ret);
+ return ret;
+ }
+
+ chip->dev = &client->dev;
+
+ chip->vsys_supply = devm_regulator_get_optional(chip->dev, "vsys");
+ if (IS_ERR(chip->vsys_supply)) {
+ ret = PTR_ERR(chip->vsys_supply);
+ if (ret != -ENODEV)
+ return ret;
+ chip->vsys_supply = NULL;
+ }
+
+ chip->vdd_supply = devm_regulator_get_optional(chip->dev, "vdd");
+ if (IS_ERR(chip->vdd_supply)) {
+ ret = PTR_ERR(chip->vdd_supply);
+ if (ret != -ENODEV)
+ return ret;
+ chip->vdd_supply = NULL;
+ }
+
+ chip->vconn_supply = devm_regulator_get_optional(chip->dev, "vconn");
+ if (IS_ERR(chip->vconn_supply)) {
+ ret = PTR_ERR(chip->vconn_supply);
+ if (ret != -ENODEV)
+ return ret;
+ chip->vconn_supply = NULL;
+ }
+
+ fwnode = device_get_named_child_node(chip->dev, "connector");
+ if (IS_ERR(fwnode))
+ return PTR_ERR(fwnode);
+
+ /*
+ * When both VDD and VSYS power supplies are present, the low power
+ * supply VSYS is selected when VSYS voltage is above 3.1 V.
+ * Otherwise VDD is selected.
+ */
+ if (chip->vdd_supply &&
+ (!chip->vsys_supply ||
+ (regulator_get_voltage(chip->vsys_supply) <= 3100000)))
+ chip->main_supply = chip->vdd_supply;
+ else
+ chip->main_supply = chip->vsys_supply;
+
+ if (chip->main_supply) {
+ ret = regulator_enable(chip->main_supply);
+ if (ret) {
+ dev_err(chip->dev,
+ "Failed to enable main supply: %d\n", ret);
+ goto fwnode_put;
+ }
+ }
+
+ /* Get configuration from chip */
+ ret = stusb160x_get_caps(chip);
+ if (ret) {
+ dev_err(chip->dev, "Failed to get port caps: %d\n", ret);
+ goto main_reg_disable;
+ }
+
+ /* Get optional re-configuration from device tree */
+ ret = stusb160x_get_fw_caps(chip, fwnode);
+ if (ret) {
+ dev_err(chip->dev, "Failed to get connector caps: %d\n", ret);
+ goto main_reg_disable;
+ }
+
+ ret = stusb160x_chip_init(chip);
+ if (ret) {
+ dev_err(chip->dev, "Failed to init port: %d\n", ret);
+ goto main_reg_disable;
+ }
+
+ chip->port = typec_register_port(chip->dev, &chip->capability);
+ if (!chip->port) {
+ ret = -ENODEV;
+ goto all_reg_disable;
+ }
+
+ /*
+ * Default power operation mode initialization: will be updated upon
+ * attach/detach interrupt
+ */
+ typec_set_pwr_opmode(chip->port, chip->pwr_opmode);
+
+ if (client->irq) {
+ ret = stusb160x_irq_init(chip, client->irq);
+ if (ret)
+ goto port_unregister;
+
+ chip->role_sw = fwnode_usb_role_switch_get(fwnode);
+ if (IS_ERR(chip->role_sw)) {
+ ret = PTR_ERR(chip->role_sw);
+ if (ret != -EPROBE_DEFER)
+ dev_err(chip->dev,
+ "Failed to get usb role switch: %d\n",
+ ret);
+ goto port_unregister;
+ }
+ } else {
+ /*
+ * If Source or Dual power role, need to enable VDD supply
+ * providing Vbus if present. In case of interrupt support,
+ * VDD supply will be dynamically managed upon attach/detach
+ * interrupt.
+ */
+ if (chip->port_type != TYPEC_PORT_SNK && chip->vdd_supply) {
+ ret = regulator_enable(chip->vdd_supply);
+ if (ret) {
+ dev_err(chip->dev,
+ "Failed to enable VDD supply: %d\n",
+ ret);
+ goto port_unregister;
+ }
+ chip->vbus_on = true;
+ }
+ }
+
+ fwnode_handle_put(fwnode);
+
+ return 0;
+
+port_unregister:
+ typec_unregister_port(chip->port);
+all_reg_disable:
+ if (stusb160x_get_vconn(chip))
+ stusb160x_set_vconn(chip, false);
+main_reg_disable:
+ if (chip->main_supply)
+ regulator_disable(chip->main_supply);
+fwnode_put:
+ fwnode_handle_put(fwnode);
+
+ return ret;
+}
+
+static int stusb160x_remove(struct i2c_client *client)
+{
+ struct stusb160x *chip = i2c_get_clientdata(client);
+
+ if (chip->partner) {
+ typec_unregister_partner(chip->partner);
+ chip->partner = NULL;
+ }
+
+ if (chip->vbus_on)
+ regulator_disable(chip->vdd_supply);
+
+ if (chip->role_sw)
+ usb_role_switch_put(chip->role_sw);
+
+ typec_unregister_port(chip->port);
+
+ if (stusb160x_get_vconn(chip))
+ stusb160x_set_vconn(chip, false);
+
+ if (chip->main_supply)
+ regulator_disable(chip->main_supply);
+
+ return 0;
+}
+
+static int __maybe_unused stusb160x_suspend(struct device *dev)
+{
+ struct stusb160x *chip = dev_get_drvdata(dev);
+
+ /* Mask interrupts */
+ return regmap_update_bits(chip->regmap,
+ STUSB160X_ALERT_STATUS_MASK_CTRL,
+ STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS);
+}
+
+static int __maybe_unused stusb160x_resume(struct device *dev)
+{
+ struct stusb160x *chip = dev_get_drvdata(dev);
+ u32 status;
+ int ret;
+
+ ret = regcache_sync(chip->regmap);
+ if (ret)
+ return ret;
+
+ /* Check if attach/detach occurred during low power */
+ ret = regmap_read(chip->regmap,
+ STUSB160X_CC_CONNECTION_STATUS, &status);
+ if (ret)
+ return ret;
+
+ if (chip->partner && !(status & STUSB160X_CC_ATTACH))
+ stusb160x_detach(chip, status);
+
+ if (!chip->partner && (status & STUSB160X_CC_ATTACH)) {
+ ret = stusb160x_attach(chip, status);
+ if (ret)
+ dev_err(chip->dev, "attach failed: %d\n", ret);
+ }
+
+ /* Unmask interrupts */
+ return regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL,
+ STUSB160X_CC_CONNECTION, 0);
+}
+
+static SIMPLE_DEV_PM_OPS(stusb160x_pm_ops, stusb160x_suspend, stusb160x_resume);
+
+static struct i2c_driver stusb160x_driver = {
+ .driver = {
+ .name = "stusb160x",
+ .pm = &stusb160x_pm_ops,
+ .of_match_table = stusb160x_of_match,
+ },
+ .probe_new = stusb160x_probe,
+ .remove = stusb160x_remove,
+};
+module_i2c_driver(stusb160x_driver);
+
+MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STUSB160x Type-C controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index fa3f39336246..557f392fe24d 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -27,6 +27,20 @@ config TYPEC_RT1711H
Type-C Port Controller Manager to provide USB PD and USB
Type-C functionalities.
+config TYPEC_MT6360
+ tristate "Mediatek MT6360 Type-C driver"
+ depends on MFD_MT6360
+ help
+ Mediatek MT6360 is a multi-functional IC that includes
+ USB Type-C. It works with Type-C Port Controller Manager
+ to provide USB PD and USB Type-C functionalities.
+
+config TYPEC_TCPCI_MAXIM
+ tristate "Maxim TCPCI based Type-C chip driver"
+ help
+ MAXIM TCPCI based Type-C/PD chip driver. Works with
+ with Type-C Port Controller Manager.
+
endif # TYPEC_TCPCI
config TYPEC_FUSB302
diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile
index a5ff6c8eb892..7d499f3569fd 100644
--- a/drivers/usb/typec/tcpm/Makefile
+++ b/drivers/usb/typec/tcpm/Makefile
@@ -1,7 +1,9 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_TYPEC_TCPM) += tcpm.o
-obj-$(CONFIG_TYPEC_FUSB302) += fusb302.o
-obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o
-typec_wcove-y := wcove.o
-obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o
-obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o
+obj-$(CONFIG_TYPEC_TCPM) += tcpm.o
+obj-$(CONFIG_TYPEC_FUSB302) += fusb302.o
+obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o
+typec_wcove-y := wcove.o
+obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o
+obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o
+obj-$(CONFIG_TYPEC_MT6360) += tcpci_mt6360.o
+obj-$(CONFIG_TYPEC_TCPCI_MAXIM) += tcpci_maxim.o
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index bd80e03b2b6f..f9f0af64da5f 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -38,6 +38,12 @@ struct tcpci_chip {
struct tcpci_data data;
};
+struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci)
+{
+ return tcpci->port;
+}
+EXPORT_SYMBOL_GPL(tcpci_get_tcpm_port);
+
static inline struct tcpci *tcpc_to_tcpci(struct tcpc_dev *tcpc)
{
return container_of(tcpc, struct tcpci, tcpc);
@@ -191,12 +197,47 @@ static int tcpci_set_polarity(struct tcpc_dev *tcpc,
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
unsigned int reg;
int ret;
+ enum typec_cc_status cc1, cc2;
- /* Keep the disconnect cc line open */
+ /* Obtain Rp setting from role control */
ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, &reg);
if (ret < 0)
return ret;
+ ret = tcpci_get_cc(tcpc, &cc1, &cc2);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * When port has drp toggling enabled, ROLE_CONTROL would only have the initial
+ * terminations for the toggling and does not indicate the final cc
+ * terminations when ConnectionResult is 0 i.e. drp toggling stops and
+ * the connection is resolbed. Infer port role from TCPC_CC_STATUS based on the
+ * terminations seen. The port role is then used to set the cc terminations.
+ */
+ if (reg & TCPC_ROLE_CTRL_DRP) {
+ /* Disable DRP for the OPEN setting to take effect */
+ reg = reg & ~TCPC_ROLE_CTRL_DRP;
+
+ if (polarity == TYPEC_POLARITY_CC2) {
+ reg &= ~(TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT);
+ /* Local port is source */
+ if (cc2 == TYPEC_CC_RD)
+ /* Role control would have the Rp setting when DRP was enabled */
+ reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT;
+ else
+ reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT;
+ } else {
+ reg &= ~(TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT);
+ /* Local port is source */
+ if (cc1 == TYPEC_CC_RD)
+ /* Role control would have the Rp setting when DRP was enabled */
+ reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT;
+ else
+ reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT;
+ }
+ }
+
if (polarity == TYPEC_POLARITY_CC2)
reg |= TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT;
else
@@ -227,6 +268,22 @@ static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable)
enable ? TCPC_POWER_CTRL_VCONN_ENABLE : 0);
}
+static int tcpci_enable_frs(struct tcpc_dev *dev, bool enable)
+{
+ struct tcpci *tcpci = tcpc_to_tcpci(dev);
+ int ret;
+
+ /* To prevent disconnect during FRS, set disconnect threshold to 3.5V */
+ ret = tcpci_write16(tcpci, TCPC_VBUS_SINK_DISCONNECT_THRESH, enable ? 0 : 0x8c);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_FAST_ROLE_SWAP_EN, enable ?
+ TCPC_FAST_ROLE_SWAP_EN : 0);
+
+ return ret;
+}
+
static int tcpci_set_bist_data(struct tcpc_dev *tcpc, bool enable)
{
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
@@ -287,6 +344,13 @@ static int tcpci_set_vbus(struct tcpc_dev *tcpc, bool source, bool sink)
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
int ret;
+ if (tcpci->data->set_vbus) {
+ ret = tcpci->data->set_vbus(tcpci, tcpci->data, source, sink);
+ /* Bypass when ret > 0 */
+ if (ret != 0)
+ return ret < 0 ? ret : 0;
+ }
+
/* Disable both source and sink first before enabling anything */
if (!source) {
@@ -330,23 +394,47 @@ static int tcpci_pd_transmit(struct tcpc_dev *tcpc,
int ret;
cnt = msg ? pd_header_cnt(header) * 4 : 0;
- ret = regmap_write(tcpci->regmap, TCPC_TX_BYTE_CNT, cnt + 2);
- if (ret < 0)
- return ret;
+ /**
+ * TCPCI spec forbids direct access of TCPC_TX_DATA.
+ * But, since some of the chipsets offer this capability,
+ * it's fair to support both.
+ */
+ if (tcpci->data->TX_BUF_BYTE_x_hidden) {
+ u8 buf[TCPC_TRANSMIT_BUFFER_MAX_LEN] = {0,};
+ u8 pos = 0;
- ret = tcpci_write16(tcpci, TCPC_TX_HDR, header);
- if (ret < 0)
- return ret;
+ /* Payload + header + TCPC_TX_BYTE_CNT */
+ buf[pos++] = cnt + 2;
+
+ if (msg)
+ memcpy(&buf[pos], &msg->header, sizeof(msg->header));
- if (cnt > 0) {
- ret = regmap_raw_write(tcpci->regmap, TCPC_TX_DATA,
- &msg->payload, cnt);
+ pos += sizeof(header);
+
+ if (cnt > 0)
+ memcpy(&buf[pos], msg->payload, cnt);
+
+ pos += cnt;
+ ret = regmap_raw_write(tcpci->regmap, TCPC_TX_BYTE_CNT, buf, pos);
+ if (ret < 0)
+ return ret;
+ } else {
+ ret = regmap_write(tcpci->regmap, TCPC_TX_BYTE_CNT, cnt + 2);
if (ret < 0)
return ret;
+
+ ret = tcpci_write16(tcpci, TCPC_TX_HDR, header);
+ if (ret < 0)
+ return ret;
+
+ if (cnt > 0) {
+ ret = regmap_raw_write(tcpci->regmap, TCPC_TX_DATA, &msg->payload, cnt);
+ if (ret < 0)
+ return ret;
+ }
}
- reg = (PD_RETRY_COUNT << TCPC_TRANSMIT_RETRY_SHIFT) |
- (type << TCPC_TRANSMIT_TYPE_SHIFT);
+ reg = (PD_RETRY_COUNT << TCPC_TRANSMIT_RETRY_SHIFT) | (type << TCPC_TRANSMIT_TYPE_SHIFT);
ret = regmap_write(tcpci->regmap, TCPC_TRANSMIT, reg);
if (ret < 0)
return ret;
@@ -539,6 +627,7 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
tcpci->tcpc.set_roles = tcpci_set_roles;
tcpci->tcpc.pd_transmit = tcpci_pd_transmit;
tcpci->tcpc.set_bist_data = tcpci_set_bist_data;
+ tcpci->tcpc.enable_frs = tcpci_enable_frs;
err = tcpci_parse_config(tcpci);
if (err < 0)
diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h
index 11c36d086c86..5ef07a56d67a 100644
--- a/drivers/usb/typec/tcpm/tcpci.h
+++ b/drivers/usb/typec/tcpm/tcpci.h
@@ -16,6 +16,8 @@
#define TCPC_PD_INT_REV 0xa
#define TCPC_ALERT 0x10
+#define TCPC_ALERT_EXTND BIT(14)
+#define TCPC_ALERT_EXTENDED_STATUS BIT(13)
#define TCPC_ALERT_VBUS_DISCNCT BIT(11)
#define TCPC_ALERT_RX_BUF_OVF BIT(10)
#define TCPC_ALERT_FAULT BIT(9)
@@ -32,6 +34,13 @@
#define TCPC_ALERT_MASK 0x12
#define TCPC_POWER_STATUS_MASK 0x14
#define TCPC_FAULT_STATUS_MASK 0x15
+
+#define TCPC_EXTENDED_STATUS_MASK 0x16
+#define TCPC_EXTENDED_STATUS_MASK_VSAFE0V BIT(0)
+
+#define TCPC_ALERT_EXTENDED_MASK 0x17
+#define TCPC_SINK_FAST_ROLE_SWAP BIT(0)
+
#define TCPC_CONFIG_STD_OUTPUT 0x18
#define TCPC_TCPC_CTRL 0x19
@@ -58,6 +67,7 @@
#define TCPC_POWER_CTRL 0x1c
#define TCPC_POWER_CTRL_VCONN_ENABLE BIT(0)
+#define TCPC_FAST_ROLE_SWAP_EN BIT(7)
#define TCPC_CC_STATUS 0x1d
#define TCPC_CC_STATUS_TOGGLING BIT(5)
@@ -69,11 +79,14 @@
#define TCPC_POWER_STATUS 0x1e
#define TCPC_POWER_STATUS_UNINIT BIT(6)
+#define TCPC_POWER_STATUS_SOURCING_VBUS BIT(4)
#define TCPC_POWER_STATUS_VBUS_DET BIT(3)
#define TCPC_POWER_STATUS_VBUS_PRES BIT(2)
#define TCPC_FAULT_STATUS 0x1f
+#define TCPC_ALERT_EXTENDED 0x21
+
#define TCPC_COMMAND 0x23
#define TCPC_CMD_WAKE_I2C 0x11
#define TCPC_CMD_DISABLE_VBUS_DETECT 0x22
@@ -104,6 +117,7 @@
#define TCPC_RX_BYTE_CNT 0x30
#define TCPC_RX_BUF_FRAME_TYPE 0x31
+#define TCPC_RX_BUF_FRAME_TYPE_SOP 0
#define TCPC_RX_HDR 0x32
#define TCPC_RX_DATA 0x34 /* through 0x4f */
@@ -123,18 +137,29 @@
#define TCPC_VBUS_VOLTAGE_ALARM_HI_CFG 0x76
#define TCPC_VBUS_VOLTAGE_ALARM_LO_CFG 0x78
+/* I2C_WRITE_BYTE_COUNT + 1 when TX_BUF_BYTE_x is only accessible I2C_WRITE_BYTE_COUNT */
+#define TCPC_TRANSMIT_BUFFER_MAX_LEN 31
+
+/*
+ * @TX_BUF_BYTE_x_hidden
+ * optional; Set when TX_BUF_BYTE_x can only be accessed through I2C_WRITE_BYTE_COUNT.
+ */
struct tcpci;
struct tcpci_data {
struct regmap *regmap;
+ unsigned char TX_BUF_BYTE_x_hidden:1;
int (*init)(struct tcpci *tcpci, struct tcpci_data *data);
int (*set_vconn)(struct tcpci *tcpci, struct tcpci_data *data,
bool enable);
int (*start_drp_toggling)(struct tcpci *tcpci, struct tcpci_data *data,
enum typec_cc_status cc);
+ int (*set_vbus)(struct tcpci *tcpci, struct tcpci_data *data, bool source, bool sink);
};
struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data);
void tcpci_unregister_port(struct tcpci *tcpci);
irqreturn_t tcpci_irq(struct tcpci *tcpci);
+struct tcpm_port;
+struct tcpm_port *tcpci_get_tcpm_port(struct tcpci *tcpci);
#endif /* __LINUX_USB_TCPCI_H */
diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c
new file mode 100644
index 000000000000..723d7dd38f75
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpci_maxim.c
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020, Google LLC
+ *
+ * MAXIM TCPCI based TCPC driver
+ */
+
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/tcpm.h>
+#include <linux/usb/typec.h>
+
+#include "tcpci.h"
+
+#define PD_ACTIVITY_TIMEOUT_MS 10000
+
+#define TCPC_VENDOR_ALERT 0x80
+
+#define TCPC_RECEIVE_BUFFER_COUNT_OFFSET 0
+#define TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET 1
+#define TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET 2
+
+/*
+ * LongMessage not supported, hence 32 bytes for buf to be read from RECEIVE_BUFFER.
+ * DEVICE_CAPABILITIES_2.LongMessage = 0, the value in READABLE_BYTE_COUNT reg shall be
+ * less than or equal to 31. Since, RECEIVE_BUFFER len = 31 + 1(READABLE_BYTE_COUNT).
+ */
+#define TCPC_RECEIVE_BUFFER_LEN 32
+
+#define MAX_BUCK_BOOST_SID 0x69
+#define MAX_BUCK_BOOST_OP 0xb9
+#define MAX_BUCK_BOOST_OFF 0
+#define MAX_BUCK_BOOST_SOURCE 0xa
+#define MAX_BUCK_BOOST_SINK 0x5
+
+struct max_tcpci_chip {
+ struct tcpci_data data;
+ struct tcpci *tcpci;
+ struct device *dev;
+ struct i2c_client *client;
+ struct tcpm_port *port;
+};
+
+static const struct regmap_range max_tcpci_tcpci_range[] = {
+ regmap_reg_range(0x00, 0x95)
+};
+
+const struct regmap_access_table max_tcpci_tcpci_write_table = {
+ .yes_ranges = max_tcpci_tcpci_range,
+ .n_yes_ranges = ARRAY_SIZE(max_tcpci_tcpci_range),
+};
+
+static const struct regmap_config max_tcpci_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x95,
+ .wr_table = &max_tcpci_tcpci_write_table,
+};
+
+static struct max_tcpci_chip *tdata_to_max_tcpci(struct tcpci_data *tdata)
+{
+ return container_of(tdata, struct max_tcpci_chip, data);
+}
+
+static int max_tcpci_read16(struct max_tcpci_chip *chip, unsigned int reg, u16 *val)
+{
+ return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u16));
+}
+
+static int max_tcpci_write16(struct max_tcpci_chip *chip, unsigned int reg, u16 val)
+{
+ return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u16));
+}
+
+static int max_tcpci_read8(struct max_tcpci_chip *chip, unsigned int reg, u8 *val)
+{
+ return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u8));
+}
+
+static int max_tcpci_write8(struct max_tcpci_chip *chip, unsigned int reg, u8 val)
+{
+ return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u8));
+}
+
+static void max_tcpci_init_regs(struct max_tcpci_chip *chip)
+{
+ u16 alert_mask = 0;
+ int ret;
+
+ ret = max_tcpci_write16(chip, TCPC_ALERT, 0xffff);
+ if (ret < 0) {
+ dev_err(chip->dev, "Error writing to TCPC_ALERT ret:%d\n", ret);
+ return;
+ }
+
+ ret = max_tcpci_write16(chip, TCPC_VENDOR_ALERT, 0xffff);
+ if (ret < 0) {
+ dev_err(chip->dev, "Error writing to TCPC_VENDOR_ALERT ret:%d\n", ret);
+ return;
+ }
+
+ ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED, 0xff);
+ if (ret < 0) {
+ dev_err(chip->dev, "Unable to clear TCPC_ALERT_EXTENDED ret:%d\n", ret);
+ return;
+ }
+
+ alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED |
+ TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS |
+ TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS |
+ /* Enable Extended alert for detecting Fast Role Swap Signal */
+ TCPC_ALERT_EXTND;
+
+ ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask);
+ if (ret < 0) {
+ dev_err(chip->dev,
+ "Error enabling TCPC_ALERT: TCPC_ALERT_MASK write failed ret:%d\n", ret);
+ return;
+ }
+
+ /* Enable vbus voltage monitoring and voltage alerts */
+ ret = max_tcpci_write8(chip, TCPC_POWER_CTRL, 0);
+ if (ret < 0) {
+ dev_err(chip->dev, "Error writing to TCPC_POWER_CTRL ret:%d\n", ret);
+ return;
+ }
+
+ ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED_MASK, TCPC_SINK_FAST_ROLE_SWAP);
+ if (ret < 0)
+ return;
+}
+
+static void process_rx(struct max_tcpci_chip *chip, u16 status)
+{
+ struct pd_message msg;
+ u8 count, frame_type, rx_buf[TCPC_RECEIVE_BUFFER_LEN];
+ int ret, payload_index;
+ u8 *rx_buf_ptr;
+
+ /*
+ * READABLE_BYTE_COUNT: Indicates the number of bytes in the RX_BUF_BYTE_x registers
+ * plus one (for the RX_BUF_FRAME_TYPE) Table 4-36.
+ * Read the count and frame type.
+ */
+ ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, 2);
+ if (ret < 0) {
+ dev_err(chip->dev, "TCPC_RX_BYTE_CNT read failed ret:%d", ret);
+ return;
+ }
+
+ count = rx_buf[TCPC_RECEIVE_BUFFER_COUNT_OFFSET];
+ frame_type = rx_buf[TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET];
+
+ if (count == 0 || frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP) {
+ max_tcpci_write16(chip, TCPC_ALERT, TCPC_ALERT_RX_STATUS);
+ dev_err(chip->dev, "%s", count == 0 ? "error: count is 0" :
+ "error frame_type is not SOP");
+ return;
+ }
+
+ if (count > sizeof(struct pd_message) || count + 1 > TCPC_RECEIVE_BUFFER_LEN) {
+ dev_err(chip->dev, "Invalid TCPC_RX_BYTE_CNT %d", count);
+ return;
+ }
+
+ /*
+ * Read count + 1 as RX_BUF_BYTE_x is hidden and can only be read through
+ * TCPC_RX_BYTE_CNT
+ */
+ count += 1;
+ ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, count);
+ if (ret < 0) {
+ dev_err(chip->dev, "Error: TCPC_RX_BYTE_CNT read failed: %d", ret);
+ return;
+ }
+
+ rx_buf_ptr = rx_buf + TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET;
+ msg.header = cpu_to_le16(*(u16 *)rx_buf_ptr);
+ rx_buf_ptr = rx_buf_ptr + sizeof(msg.header);
+ for (payload_index = 0; payload_index < pd_header_cnt_le(msg.header); payload_index++,
+ rx_buf_ptr += sizeof(msg.payload[0]))
+ msg.payload[payload_index] = cpu_to_le32(*(u32 *)rx_buf_ptr);
+
+ /*
+ * Read complete, clear RX status alert bit.
+ * Clear overflow as well if set.
+ */
+ ret = max_tcpci_write16(chip, TCPC_ALERT, status & TCPC_ALERT_RX_BUF_OVF ?
+ TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF :
+ TCPC_ALERT_RX_STATUS);
+ if (ret < 0)
+ return;
+
+ tcpm_pd_receive(chip->port, &msg);
+}
+
+static int max_tcpci_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, bool source, bool sink)
+{
+ struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata);
+ u8 buffer_source[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SOURCE};
+ u8 buffer_sink[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SINK};
+ u8 buffer_none[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_OFF};
+ struct i2c_client *i2c = chip->client;
+ int ret;
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = MAX_BUCK_BOOST_SID,
+ .flags = i2c->flags & I2C_M_TEN,
+ .len = 2,
+ .buf = source ? buffer_source : sink ? buffer_sink : buffer_none,
+ },
+ };
+
+ if (source && sink) {
+ dev_err(chip->dev, "Both source and sink set\n");
+ return -EINVAL;
+ }
+
+ ret = i2c_transfer(i2c->adapter, msgs, 1);
+
+ return ret < 0 ? ret : 1;
+}
+
+static void process_power_status(struct max_tcpci_chip *chip)
+{
+ u8 pwr_status;
+ int ret;
+
+ ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &pwr_status);
+ if (ret < 0)
+ return;
+
+ if (pwr_status == 0xff) {
+ max_tcpci_init_regs(chip);
+ } else if (pwr_status & TCPC_POWER_STATUS_SOURCING_VBUS) {
+ tcpm_sourcing_vbus(chip->port);
+ /*
+ * Alawys re-enable boost here.
+ * In normal case, when say an headset is attached, TCPM would
+ * have instructed to TCPC to enable boost, so the call is a
+ * no-op.
+ * But for Fast Role Swap case, Boost turns on autonomously without
+ * AP intervention, but, needs AP to enable source mode explicitly
+ * for AP to regain control.
+ */
+ max_tcpci_set_vbus(chip->tcpci, &chip->data, true, false);
+ } else {
+ tcpm_vbus_change(chip->port);
+ }
+}
+
+static void process_tx(struct max_tcpci_chip *chip, u16 status)
+{
+ if (status & TCPC_ALERT_TX_SUCCESS)
+ tcpm_pd_transmit_complete(chip->port, TCPC_TX_SUCCESS);
+ else if (status & TCPC_ALERT_TX_DISCARDED)
+ tcpm_pd_transmit_complete(chip->port, TCPC_TX_DISCARDED);
+ else if (status & TCPC_ALERT_TX_FAILED)
+ tcpm_pd_transmit_complete(chip->port, TCPC_TX_FAILED);
+
+ /* Reinit regs as Hard reset sets them to default value */
+ if ((status & TCPC_ALERT_TX_SUCCESS) && (status & TCPC_ALERT_TX_FAILED))
+ max_tcpci_init_regs(chip);
+}
+
+static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
+{
+ u16 mask;
+ int ret;
+ u8 reg_status;
+
+ /*
+ * Clear alert status for everything except RX_STATUS, which shouldn't
+ * be cleared until we have successfully retrieved message.
+ */
+ if (status & ~TCPC_ALERT_RX_STATUS) {
+ mask = status & TCPC_ALERT_RX_BUF_OVF ?
+ status & ~(TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF) :
+ status & ~TCPC_ALERT_RX_STATUS;
+ ret = max_tcpci_write16(chip, TCPC_ALERT, mask);
+ if (ret < 0) {
+ dev_err(chip->dev, "ALERT clear failed\n");
+ return ret;
+ }
+ }
+
+ if (status & TCPC_ALERT_RX_BUF_OVF && !(status & TCPC_ALERT_RX_STATUS)) {
+ ret = max_tcpci_write16(chip, TCPC_ALERT, (TCPC_ALERT_RX_STATUS |
+ TCPC_ALERT_RX_BUF_OVF));
+ if (ret < 0) {
+ dev_err(chip->dev, "ALERT clear failed\n");
+ return ret;
+ }
+ }
+
+ if (status & TCPC_ALERT_EXTND) {
+ ret = max_tcpci_read8(chip, TCPC_ALERT_EXTENDED, &reg_status);
+ if (ret < 0)
+ return ret;
+
+ ret = max_tcpci_write8(chip, TCPC_ALERT_EXTENDED, reg_status);
+ if (ret < 0)
+ return ret;
+
+ if (reg_status & TCPC_SINK_FAST_ROLE_SWAP) {
+ dev_info(chip->dev, "FRS Signal");
+ tcpm_sink_frs(chip->port);
+ }
+ }
+
+ if (status & TCPC_ALERT_RX_STATUS)
+ process_rx(chip, status);
+
+ if (status & TCPC_ALERT_VBUS_DISCNCT)
+ tcpm_vbus_change(chip->port);
+
+ if (status & TCPC_ALERT_CC_STATUS)
+ tcpm_cc_change(chip->port);
+
+ if (status & TCPC_ALERT_POWER_STATUS)
+ process_power_status(chip);
+
+ if (status & TCPC_ALERT_RX_HARD_RST) {
+ tcpm_pd_hard_reset(chip->port);
+ max_tcpci_init_regs(chip);
+ }
+
+ if (status & TCPC_ALERT_TX_SUCCESS || status & TCPC_ALERT_TX_DISCARDED || status &
+ TCPC_ALERT_TX_FAILED)
+ process_tx(chip, status);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max_tcpci_irq(int irq, void *dev_id)
+{
+ struct max_tcpci_chip *chip = dev_id;
+ u16 status;
+ irqreturn_t irq_return;
+ int ret;
+
+ if (!chip->port)
+ return IRQ_HANDLED;
+
+ ret = max_tcpci_read16(chip, TCPC_ALERT, &status);
+ if (ret < 0) {
+ dev_err(chip->dev, "ALERT read failed\n");
+ return ret;
+ }
+ while (status) {
+ irq_return = _max_tcpci_irq(chip, status);
+ /* Do not return if the ALERT is already set. */
+ ret = max_tcpci_read16(chip, TCPC_ALERT, &status);
+ if (ret < 0)
+ break;
+ }
+
+ return irq_return;
+}
+
+static irqreturn_t max_tcpci_isr(int irq, void *dev_id)
+{
+ struct max_tcpci_chip *chip = dev_id;
+
+ pm_wakeup_event(chip->dev, PD_ACTIVITY_TIMEOUT_MS);
+
+ if (!chip->port)
+ return IRQ_HANDLED;
+
+ return IRQ_WAKE_THREAD;
+}
+
+static int max_tcpci_init_alert(struct max_tcpci_chip *chip, struct i2c_client *client)
+{
+ int ret;
+
+ ret = devm_request_threaded_irq(chip->dev, client->irq, max_tcpci_isr, max_tcpci_irq,
+ (IRQF_TRIGGER_LOW | IRQF_ONESHOT), dev_name(chip->dev),
+ chip);
+
+ if (ret < 0)
+ return ret;
+
+ enable_irq_wake(client->irq);
+ return 0;
+}
+
+static int max_tcpci_start_toggling(struct tcpci *tcpci, struct tcpci_data *tdata,
+ enum typec_cc_status cc)
+{
+ struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata);
+
+ max_tcpci_init_regs(chip);
+
+ return 0;
+}
+
+static int tcpci_init(struct tcpci *tcpci, struct tcpci_data *data)
+{
+ /*
+ * Generic TCPCI overwrites the regs once this driver initializes
+ * them. Prevent this by returning -1.
+ */
+ return -1;
+}
+
+static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id)
+{
+ int ret;
+ struct max_tcpci_chip *chip;
+ u8 power_status;
+
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->client = client;
+ chip->data.regmap = devm_regmap_init_i2c(client, &max_tcpci_regmap_config);
+ if (IS_ERR(chip->data.regmap)) {
+ dev_err(&client->dev, "Regmap init failed\n");
+ return PTR_ERR(chip->data.regmap);
+ }
+
+ chip->dev = &client->dev;
+ i2c_set_clientdata(client, chip);
+
+ ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &power_status);
+ if (ret < 0)
+ return ret;
+
+ /* Chip level tcpci callbacks */
+ chip->data.set_vbus = max_tcpci_set_vbus;
+ chip->data.start_drp_toggling = max_tcpci_start_toggling;
+ chip->data.TX_BUF_BYTE_x_hidden = true;
+ chip->data.init = tcpci_init;
+
+ max_tcpci_init_regs(chip);
+ chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
+ if (IS_ERR_OR_NULL(chip->tcpci)) {
+ dev_err(&client->dev, "TCPCI port registration failed");
+ ret = PTR_ERR(chip->tcpci);
+ return PTR_ERR(chip->tcpci);
+ }
+ chip->port = tcpci_get_tcpm_port(chip->tcpci);
+ ret = max_tcpci_init_alert(chip, client);
+ if (ret < 0)
+ goto unreg_port;
+
+ device_init_wakeup(chip->dev, true);
+ return 0;
+
+unreg_port:
+ tcpci_unregister_port(chip->tcpci);
+
+ return ret;
+}
+
+static int max_tcpci_remove(struct i2c_client *client)
+{
+ struct max_tcpci_chip *chip = i2c_get_clientdata(client);
+
+ if (!IS_ERR_OR_NULL(chip->tcpci))
+ tcpci_unregister_port(chip->tcpci);
+
+ return 0;
+}
+
+static const struct i2c_device_id max_tcpci_id[] = {
+ { "maxtcpc", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max_tcpci_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id max_tcpci_of_match[] = {
+ { .compatible = "maxim,tcpc", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, max_tcpci_of_match);
+#endif
+
+static struct i2c_driver max_tcpci_i2c_driver = {
+ .driver = {
+ .name = "maxtcpc",
+ .of_match_table = of_match_ptr(max_tcpci_of_match),
+ },
+ .probe = max_tcpci_probe,
+ .remove = max_tcpci_remove,
+ .id_table = max_tcpci_id,
+};
+module_i2c_driver(max_tcpci_i2c_driver);
+
+MODULE_AUTHOR("Badhri Jagan Sridharan <badhri@google.com>");
+MODULE_DESCRIPTION("Maxim TCPCI based USB Type-C Port Controller Interface Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c
new file mode 100644
index 000000000000..f1bd9e09bc87
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: ChiYuan Huang <cy_huang@richtek.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/usb/tcpm.h>
+
+#include "tcpci.h"
+
+#define MT6360_REG_VCONNCTRL1 0x8C
+#define MT6360_REG_MODECTRL2 0x8F
+#define MT6360_REG_SWRESET 0xA0
+#define MT6360_REG_DEBCTRL1 0xA1
+#define MT6360_REG_DRPCTRL1 0xA2
+#define MT6360_REG_DRPCTRL2 0xA3
+#define MT6360_REG_I2CTORST 0xBF
+#define MT6360_REG_RXCTRL2 0xCF
+#define MT6360_REG_CTDCTRL2 0xEC
+
+/* MT6360_REG_VCONNCTRL1 */
+#define MT6360_VCONNCL_ENABLE BIT(0)
+/* MT6360_REG_RXCTRL2 */
+#define MT6360_OPEN40M_ENABLE BIT(7)
+/* MT6360_REG_CTDCTRL2 */
+#define MT6360_RPONESHOT_ENABLE BIT(6)
+
+struct mt6360_tcpc_info {
+ struct tcpci_data tdata;
+ struct tcpci *tcpci;
+ struct device *dev;
+ int irq;
+};
+
+static inline int mt6360_tcpc_read16(struct regmap *regmap,
+ unsigned int reg, u16 *val)
+{
+ return regmap_raw_read(regmap, reg, val, sizeof(u16));
+}
+
+static inline int mt6360_tcpc_write16(struct regmap *regmap,
+ unsigned int reg, u16 val)
+{
+ return regmap_raw_write(regmap, reg, &val, sizeof(u16));
+}
+
+static int mt6360_tcpc_init(struct tcpci *tcpci, struct tcpci_data *tdata)
+{
+ struct regmap *regmap = tdata->regmap;
+ int ret;
+
+ ret = regmap_write(regmap, MT6360_REG_SWRESET, 0x01);
+ if (ret)
+ return ret;
+
+ /* after reset command, wait 1~2ms to wait IC action */
+ usleep_range(1000, 2000);
+
+ /* write all alert to masked */
+ ret = mt6360_tcpc_write16(regmap, TCPC_ALERT_MASK, 0);
+ if (ret)
+ return ret;
+
+ /* config I2C timeout reset enable , and timeout to 200ms */
+ ret = regmap_write(regmap, MT6360_REG_I2CTORST, 0x8F);
+ if (ret)
+ return ret;
+
+ /* config CC Detect Debounce : 26.7*val us */
+ ret = regmap_write(regmap, MT6360_REG_DEBCTRL1, 0x10);
+ if (ret)
+ return ret;
+
+ /* DRP Toggle Cycle : 51.2 + 6.4*val ms */
+ ret = regmap_write(regmap, MT6360_REG_DRPCTRL1, 4);
+ if (ret)
+ return ret;
+
+ /* DRP Duyt Ctrl : dcSRC: /1024 */
+ ret = mt6360_tcpc_write16(regmap, MT6360_REG_DRPCTRL2, 330);
+ if (ret)
+ return ret;
+
+ /* Enable VCONN Current Limit function */
+ ret = regmap_update_bits(regmap, MT6360_REG_VCONNCTRL1, MT6360_VCONNCL_ENABLE,
+ MT6360_VCONNCL_ENABLE);
+ if (ret)
+ return ret;
+
+ /* Enable cc open 40ms when pmic send vsysuv signal */
+ ret = regmap_update_bits(regmap, MT6360_REG_RXCTRL2, MT6360_OPEN40M_ENABLE,
+ MT6360_OPEN40M_ENABLE);
+ if (ret)
+ return ret;
+
+ /* Enable Rpdet oneshot detection */
+ ret = regmap_update_bits(regmap, MT6360_REG_CTDCTRL2, MT6360_RPONESHOT_ENABLE,
+ MT6360_RPONESHOT_ENABLE);
+ if (ret)
+ return ret;
+
+ /* Set shipping mode off, AUTOIDLE on */
+ return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A);
+}
+
+static irqreturn_t mt6360_irq(int irq, void *dev_id)
+{
+ struct mt6360_tcpc_info *mti = dev_id;
+
+ return tcpci_irq(mti->tcpci);
+}
+
+static int mt6360_tcpc_probe(struct platform_device *pdev)
+{
+ struct mt6360_tcpc_info *mti;
+ int ret;
+
+ mti = devm_kzalloc(&pdev->dev, sizeof(*mti), GFP_KERNEL);
+ if (!mti)
+ return -ENOMEM;
+
+ mti->dev = &pdev->dev;
+
+ mti->tdata.regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!mti->tdata.regmap) {
+ dev_err(&pdev->dev, "Failed to get parent regmap\n");
+ return -ENODEV;
+ }
+
+ mti->irq = platform_get_irq_byname(pdev, "PD_IRQB");
+ if (mti->irq < 0)
+ return mti->irq;
+
+ mti->tdata.init = mt6360_tcpc_init;
+ mti->tcpci = tcpci_register_port(&pdev->dev, &mti->tdata);
+ if (IS_ERR(mti->tcpci)) {
+ dev_err(&pdev->dev, "Failed to register tcpci port\n");
+ return PTR_ERR(mti->tcpci);
+ }
+
+ ret = devm_request_threaded_irq(mti->dev, mti->irq, NULL, mt6360_irq, IRQF_ONESHOT,
+ dev_name(&pdev->dev), mti);
+ if (ret) {
+ dev_err(mti->dev, "Failed to register irq\n");
+ tcpci_unregister_port(mti->tcpci);
+ return ret;
+ }
+
+ device_init_wakeup(&pdev->dev, true);
+ platform_set_drvdata(pdev, mti);
+
+ return 0;
+}
+
+static int mt6360_tcpc_remove(struct platform_device *pdev)
+{
+ struct mt6360_tcpc_info *mti = platform_get_drvdata(pdev);
+
+ disable_irq(mti->irq);
+ tcpci_unregister_port(mti->tcpci);
+ return 0;
+}
+
+static int __maybe_unused mt6360_tcpc_suspend(struct device *dev)
+{
+ struct mt6360_tcpc_info *mti = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(mti->irq);
+
+ return 0;
+}
+
+static int __maybe_unused mt6360_tcpc_resume(struct device *dev)
+{
+ struct mt6360_tcpc_info *mti = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(mti->irq);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mt6360_tcpc_pm_ops, mt6360_tcpc_suspend, mt6360_tcpc_resume);
+
+static const struct of_device_id __maybe_unused mt6360_tcpc_of_id[] = {
+ { .compatible = "mediatek,mt6360-tcpc", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt6360_tcpc_of_id);
+
+static struct platform_driver mt6360_tcpc_driver = {
+ .driver = {
+ .name = "mt6360-tcpc",
+ .pm = &mt6360_tcpc_pm_ops,
+ .of_match_table = mt6360_tcpc_of_id,
+ },
+ .probe = mt6360_tcpc_probe,
+ .remove = mt6360_tcpc_remove,
+};
+module_platform_driver(mt6360_tcpc_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("MT6360 USB Type-C Port Controller Interface Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index a48e3f90d196..55535c4f66bf 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -8,8 +8,10 @@
#include <linux/completion.h>
#include <linux/debugfs.h>
#include <linux/device.h>
+#include <linux/hrtimer.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
+#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/power_supply.h>
@@ -28,7 +30,8 @@
#include <linux/usb/role.h>
#include <linux/usb/tcpm.h>
#include <linux/usb/typec_altmode.h>
-#include <linux/workqueue.h>
+
+#include <uapi/linux/sched/types.h>
#define FOREACH_STATE(S) \
S(INVALID_STATE), \
@@ -103,6 +106,13 @@
S(VCONN_SWAP_TURN_ON_VCONN), \
S(VCONN_SWAP_TURN_OFF_VCONN), \
\
+ S(FR_SWAP_SEND), \
+ S(FR_SWAP_SEND_TIMEOUT), \
+ S(FR_SWAP_SNK_SRC_TRANSITION_TO_OFF), \
+ S(FR_SWAP_SNK_SRC_NEW_SINK_READY), \
+ S(FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED), \
+ S(FR_SWAP_CANCEL), \
+ \
S(SNK_TRY), \
S(SNK_TRY_WAIT), \
S(SNK_TRY_WAIT_DEBOUNCE), \
@@ -124,6 +134,9 @@
S(GET_PPS_STATUS_SEND), \
S(GET_PPS_STATUS_SEND_TIMEOUT), \
\
+ S(GET_SINK_CAP), \
+ S(GET_SINK_CAP_TIMEOUT), \
+ \
S(ERROR_RECOVERY), \
S(PORT_RESET), \
S(PORT_RESET_WAIT_OFF)
@@ -167,11 +180,25 @@ enum adev_actions {
ADEV_ATTENTION,
};
+/*
+ * Initial current capability of the new source when vSafe5V is applied during PD3.0 Fast Role Swap.
+ * Based on "Table 6-14 Fixed Supply PDO - Sink" of "USB Power Delivery Specification Revision 3.0,
+ * Version 1.2"
+ */
+enum frs_typec_current {
+ FRS_NOT_SUPPORTED,
+ FRS_DEFAULT_POWER,
+ FRS_5V_1P5A,
+ FRS_5V_3A,
+};
+
/* Events from low level driver */
#define TCPM_CC_EVENT BIT(0)
#define TCPM_VBUS_EVENT BIT(1)
#define TCPM_RESET_EVENT BIT(2)
+#define TCPM_FRS_EVENT BIT(3)
+#define TCPM_SOURCING_VBUS BIT(4)
#define LOG_BUFFER_ENTRIES 1024
#define LOG_BUFFER_ENTRY_SIZE 128
@@ -181,6 +208,8 @@ enum adev_actions {
#define SVID_DISCOVERY_MAX 16
#define ALTMODE_DISCOVERY_MAX (SVID_DISCOVERY_MAX * MODE_DISCOVERY_MAX)
+#define GET_SINK_CAP_RETRY_MS 100
+
struct pd_mode_data {
int svid_index; /* current SVID index */
int nsvids;
@@ -203,7 +232,7 @@ struct tcpm_port {
struct device *dev;
struct mutex lock; /* tcpm state machine lock */
- struct workqueue_struct *wq;
+ struct kthread_worker *wq;
struct typec_capability typec_caps;
struct typec_port *typec_port;
@@ -247,15 +276,19 @@ struct tcpm_port {
enum tcpm_state prev_state;
enum tcpm_state state;
enum tcpm_state delayed_state;
- unsigned long delayed_runtime;
+ ktime_t delayed_runtime;
unsigned long delay_ms;
spinlock_t pd_event_lock;
u32 pd_events;
- struct work_struct event_work;
- struct delayed_work state_machine;
- struct delayed_work vdm_state_machine;
+ struct kthread_work event_work;
+ struct hrtimer state_machine_timer;
+ struct kthread_work state_machine;
+ struct hrtimer vdm_state_machine_timer;
+ struct kthread_work vdm_state_machine;
+ struct hrtimer enable_frs_timer;
+ struct kthread_work enable_frs;
bool state_machine_running;
struct completion tx_complete;
@@ -330,6 +363,12 @@ struct tcpm_port {
/* port belongs to a self powered device */
bool self_powered;
+ /* FRS */
+ enum frs_typec_current frs_current;
+
+ /* Sink caps have been queried */
+ bool sink_cap_done;
+
#ifdef CONFIG_DEBUG_FS
struct dentry *dentry;
struct mutex logbuffer_lock; /* log buffer access lock */
@@ -340,7 +379,7 @@ struct tcpm_port {
};
struct pd_rx_event {
- struct work_struct work;
+ struct kthread_work work;
struct tcpm_port *port;
struct pd_message msg;
};
@@ -914,6 +953,37 @@ static int tcpm_pd_send_sink_caps(struct tcpm_port *port)
return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg);
}
+static void mod_tcpm_delayed_work(struct tcpm_port *port, unsigned int delay_ms)
+{
+ if (delay_ms) {
+ hrtimer_start(&port->state_machine_timer, ms_to_ktime(delay_ms), HRTIMER_MODE_REL);
+ } else {
+ hrtimer_cancel(&port->state_machine_timer);
+ kthread_queue_work(port->wq, &port->state_machine);
+ }
+}
+
+static void mod_vdm_delayed_work(struct tcpm_port *port, unsigned int delay_ms)
+{
+ if (delay_ms) {
+ hrtimer_start(&port->vdm_state_machine_timer, ms_to_ktime(delay_ms),
+ HRTIMER_MODE_REL);
+ } else {
+ hrtimer_cancel(&port->vdm_state_machine_timer);
+ kthread_queue_work(port->wq, &port->vdm_state_machine);
+ }
+}
+
+static void mod_enable_frs_delayed_work(struct tcpm_port *port, unsigned int delay_ms)
+{
+ if (delay_ms) {
+ hrtimer_start(&port->enable_frs_timer, ms_to_ktime(delay_ms), HRTIMER_MODE_REL);
+ } else {
+ hrtimer_cancel(&port->enable_frs_timer);
+ kthread_queue_work(port->wq, &port->enable_frs);
+ }
+}
+
static void tcpm_set_state(struct tcpm_port *port, enum tcpm_state state,
unsigned int delay_ms)
{
@@ -922,9 +992,8 @@ static void tcpm_set_state(struct tcpm_port *port, enum tcpm_state state,
tcpm_states[port->state], tcpm_states[state],
delay_ms);
port->delayed_state = state;
- mod_delayed_work(port->wq, &port->state_machine,
- msecs_to_jiffies(delay_ms));
- port->delayed_runtime = jiffies + msecs_to_jiffies(delay_ms);
+ mod_tcpm_delayed_work(port, delay_ms);
+ port->delayed_runtime = ktime_add(ktime_get(), ms_to_ktime(delay_ms));
port->delay_ms = delay_ms;
} else {
tcpm_log(port, "state change %s -> %s",
@@ -939,7 +1008,7 @@ static void tcpm_set_state(struct tcpm_port *port, enum tcpm_state state,
* machine.
*/
if (!port->state_machine_running)
- mod_delayed_work(port->wq, &port->state_machine, 0);
+ mod_tcpm_delayed_work(port, 0);
}
}
@@ -960,7 +1029,7 @@ static void tcpm_queue_message(struct tcpm_port *port,
enum pd_msg_request message)
{
port->queued_message = message;
- mod_delayed_work(port->wq, &port->state_machine, 0);
+ mod_tcpm_delayed_work(port, 0);
}
/*
@@ -981,7 +1050,7 @@ static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header,
port->vdm_retries = 0;
port->vdm_state = VDM_STATE_READY;
- mod_delayed_work(port->wq, &port->vdm_state_machine, 0);
+ mod_vdm_delayed_work(port, 0);
}
static void tcpm_queue_vdm_unlocked(struct tcpm_port *port, const u32 header,
@@ -1244,8 +1313,7 @@ static void tcpm_handle_vdm_request(struct tcpm_port *port,
port->vdm_state = VDM_STATE_WAIT_RSP_BUSY;
port->vdo_retry = (p[0] & ~VDO_CMDT_MASK) |
CMDT_INIT;
- mod_delayed_work(port->wq, &port->vdm_state_machine,
- msecs_to_jiffies(PD_T_VDM_BUSY));
+ mod_vdm_delayed_work(port, PD_T_VDM_BUSY);
return;
}
port->vdm_state = VDM_STATE_DONE;
@@ -1390,8 +1458,7 @@ static void vdm_run_state_machine(struct tcpm_port *port)
port->vdm_retries = 0;
port->vdm_state = VDM_STATE_BUSY;
timeout = vdm_ready_timeout(port->vdo_data[0]);
- mod_delayed_work(port->wq, &port->vdm_state_machine,
- timeout);
+ mod_vdm_delayed_work(port, timeout);
}
break;
case VDM_STATE_WAIT_RSP_BUSY:
@@ -1420,10 +1487,9 @@ static void vdm_run_state_machine(struct tcpm_port *port)
}
}
-static void vdm_state_machine_work(struct work_struct *work)
+static void vdm_state_machine_work(struct kthread_work *work)
{
- struct tcpm_port *port = container_of(work, struct tcpm_port,
- vdm_state_machine.work);
+ struct tcpm_port *port = container_of(work, struct tcpm_port, vdm_state_machine);
enum vdm_states prev_state;
mutex_lock(&port->lock);
@@ -1591,6 +1657,7 @@ static int tcpm_altmode_vdm(struct typec_altmode *altmode,
struct tcpm_port *port = typec_altmode_get_drvdata(altmode);
tcpm_queue_vdm_unlocked(port, header, data, count - 1);
+
return 0;
}
@@ -1646,6 +1713,9 @@ static void tcpm_pd_data_request(struct tcpm_port *port,
unsigned int cnt = pd_header_cnt_le(msg->header);
unsigned int rev = pd_header_rev_le(msg->header);
unsigned int i;
+ enum frs_typec_current frs_current;
+ bool frs_enable;
+ int ret;
switch (type) {
case PD_DATA_SOURCE_CAP:
@@ -1715,7 +1785,21 @@ static void tcpm_pd_data_request(struct tcpm_port *port,
/* We don't do anything with this at the moment... */
for (i = 0; i < cnt; i++)
port->sink_caps[i] = le32_to_cpu(msg->payload[i]);
+
+ frs_current = (port->sink_caps[0] & PDO_FIXED_FRS_CURR_MASK) >>
+ PDO_FIXED_FRS_CURR_SHIFT;
+ frs_enable = frs_current && (frs_current <= port->frs_current);
+ tcpm_log(port,
+ "Port partner FRS capable partner_frs_current:%u port_frs_current:%u enable:%c",
+ frs_current, port->frs_current, frs_enable ? 'y' : 'n');
+ if (frs_enable) {
+ ret = port->tcpc->enable_frs(port->tcpc, true);
+ tcpm_log(port, "Enable FRS %s, ret:%d\n", ret ? "fail" : "success", ret);
+ }
+
port->nr_sink_caps = cnt;
+ port->sink_cap_done = true;
+ tcpm_set_state(port, SNK_READY, 0);
break;
case PD_DATA_VENDOR_DEF:
tcpm_handle_vdm_request(port, msg->payload, cnt);
@@ -1810,6 +1894,9 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
case VCONN_SWAP_WAIT_FOR_VCONN:
tcpm_set_state(port, VCONN_SWAP_TURN_OFF_VCONN, 0);
break;
+ case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF:
+ tcpm_set_state(port, FR_SWAP_SNK_SRC_NEW_SINK_READY, 0);
+ break;
default:
break;
}
@@ -1849,6 +1936,13 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
-EAGAIN : -EOPNOTSUPP);
tcpm_set_state(port, VCONN_SWAP_CANCEL, 0);
break;
+ case FR_SWAP_SEND:
+ tcpm_set_state(port, FR_SWAP_CANCEL, 0);
+ break;
+ case GET_SINK_CAP:
+ port->sink_cap_done = true;
+ tcpm_set_state(port, ready_state(port), 0);
+ break;
default:
break;
}
@@ -1883,6 +1977,9 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
case VCONN_SWAP_SEND:
tcpm_set_state(port, VCONN_SWAP_START, 0);
break;
+ case FR_SWAP_SEND:
+ tcpm_set_state(port, FR_SWAP_SNK_SRC_TRANSITION_TO_OFF, 0);
+ break;
default:
break;
}
@@ -2005,7 +2102,7 @@ static void tcpm_pd_ext_msg_request(struct tcpm_port *port,
}
}
-static void tcpm_pd_rx_handler(struct work_struct *work)
+static void tcpm_pd_rx_handler(struct kthread_work *work)
{
struct pd_rx_event *event = container_of(work,
struct pd_rx_event, work);
@@ -2067,10 +2164,10 @@ void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg)
if (!event)
return;
- INIT_WORK(&event->work, tcpm_pd_rx_handler);
+ kthread_init_work(&event->work, tcpm_pd_rx_handler);
event->port = port;
memcpy(&event->msg, msg, sizeof(*msg));
- queue_work(port->wq, &event->work);
+ kthread_queue_work(port->wq, &event->work);
}
EXPORT_SYMBOL_GPL(tcpm_pd_receive);
@@ -2123,9 +2220,9 @@ static bool tcpm_send_queued_message(struct tcpm_port *port)
} while (port->queued_message != PD_MSG_NONE);
if (port->delayed_state != INVALID_STATE) {
- if (time_is_after_jiffies(port->delayed_runtime)) {
- mod_delayed_work(port->wq, &port->state_machine,
- port->delayed_runtime - jiffies);
+ if (ktime_after(port->delayed_runtime, ktime_get())) {
+ mod_tcpm_delayed_work(port, ktime_to_ms(ktime_sub(port->delayed_runtime,
+ ktime_get())));
return true;
}
port->delayed_state = INVALID_STATE;
@@ -2783,6 +2880,10 @@ static void tcpm_reset_port(struct tcpm_port *port)
port->try_src_count = 0;
port->try_snk_count = 0;
port->usb_type = POWER_SUPPLY_USB_TYPE_C;
+ port->nr_sink_caps = 0;
+ port->sink_cap_done = false;
+ if (port->tcpc->enable_frs)
+ port->tcpc->enable_frs(port->tcpc, false);
power_supply_changed(port->psy);
}
@@ -3258,10 +3359,9 @@ static void run_state_machine(struct tcpm_port *port)
case SNK_DISCOVERY_DEBOUNCE_DONE:
if (!tcpm_port_is_disconnected(port) &&
tcpm_port_is_sink(port) &&
- time_is_after_jiffies(port->delayed_runtime)) {
+ ktime_after(port->delayed_runtime, ktime_get())) {
tcpm_set_state(port, SNK_DISCOVERY,
- jiffies_to_msecs(port->delayed_runtime -
- jiffies));
+ ktime_to_ms(ktime_sub(port->delayed_runtime, ktime_get())));
break;
}
tcpm_set_state(port, unattached_state(port), 0);
@@ -3334,10 +3434,9 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_swap_complete(port, 0);
tcpm_typec_connect(port);
tcpm_check_send_discover(port);
+ mod_enable_frs_delayed_work(port, 0);
tcpm_pps_complete(port, port->pps_status);
-
power_supply_changed(port->psy);
-
break;
/* Accessory states */
@@ -3361,9 +3460,13 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_set_state(port, HARD_RESET_START, 0);
break;
case HARD_RESET_START:
+ port->sink_cap_done = false;
+ if (port->tcpc->enable_frs)
+ port->tcpc->enable_frs(port->tcpc, false);
port->hard_reset_count++;
port->tcpc->set_pd_rx(port->tcpc, false);
tcpm_unregister_altmodes(port);
+ port->nr_sink_caps = 0;
port->send_discover = true;
if (port->pwr_role == TYPEC_SOURCE)
tcpm_set_state(port, SRC_HARD_RESET_VBUS_OFF,
@@ -3495,6 +3598,35 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_set_state(port, ready_state(port), 0);
break;
+ case FR_SWAP_SEND:
+ if (tcpm_pd_send_control(port, PD_CTRL_FR_SWAP)) {
+ tcpm_set_state(port, ERROR_RECOVERY, 0);
+ break;
+ }
+ tcpm_set_state_cond(port, FR_SWAP_SEND_TIMEOUT, PD_T_SENDER_RESPONSE);
+ break;
+ case FR_SWAP_SEND_TIMEOUT:
+ tcpm_set_state(port, ERROR_RECOVERY, 0);
+ break;
+ case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF:
+ tcpm_set_state(port, ERROR_RECOVERY, PD_T_PS_SOURCE_OFF);
+ break;
+ case FR_SWAP_SNK_SRC_NEW_SINK_READY:
+ if (port->vbus_source)
+ tcpm_set_state(port, FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED, 0);
+ else
+ tcpm_set_state(port, ERROR_RECOVERY, PD_T_RECEIVER_RESPONSE);
+ break;
+ case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED:
+ tcpm_set_pwr_role(port, TYPEC_SOURCE);
+ if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) {
+ tcpm_set_state(port, ERROR_RECOVERY, 0);
+ break;
+ }
+ tcpm_set_cc(port, tcpm_rp_cc(port));
+ tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START);
+ break;
+
/* PR_Swap states */
case PR_SWAP_ACCEPT:
tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
@@ -3573,7 +3705,7 @@ static void run_state_machine(struct tcpm_port *port)
*/
tcpm_set_pwr_role(port, TYPEC_SOURCE);
tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
- tcpm_set_state(port, SRC_STARTUP, 0);
+ tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START);
break;
case VCONN_SWAP_ACCEPT:
@@ -3618,6 +3750,12 @@ static void run_state_machine(struct tcpm_port *port)
else
tcpm_set_state(port, SNK_READY, 0);
break;
+ case FR_SWAP_CANCEL:
+ if (port->pwr_role == TYPEC_SOURCE)
+ tcpm_set_state(port, SRC_READY, 0);
+ else
+ tcpm_set_state(port, SNK_READY, 0);
+ break;
case BIST_RX:
switch (BDO_MODE_MASK(port->bist_request)) {
@@ -3652,6 +3790,14 @@ static void run_state_machine(struct tcpm_port *port)
case GET_PPS_STATUS_SEND_TIMEOUT:
tcpm_set_state(port, ready_state(port), 0);
break;
+ case GET_SINK_CAP:
+ tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP);
+ tcpm_set_state(port, GET_SINK_CAP_TIMEOUT, PD_T_SENDER_RESPONSE);
+ break;
+ case GET_SINK_CAP_TIMEOUT:
+ port->sink_cap_done = true;
+ tcpm_set_state(port, ready_state(port), 0);
+ break;
case ERROR_RECOVERY:
tcpm_swap_complete(port, -EPROTO);
tcpm_pps_complete(port, -EPROTO);
@@ -3674,10 +3820,9 @@ static void run_state_machine(struct tcpm_port *port)
}
}
-static void tcpm_state_machine_work(struct work_struct *work)
+static void tcpm_state_machine_work(struct kthread_work *work)
{
- struct tcpm_port *port = container_of(work, struct tcpm_port,
- state_machine.work);
+ struct tcpm_port *port = container_of(work, struct tcpm_port, state_machine);
enum tcpm_state prev_state;
mutex_lock(&port->lock);
@@ -3868,6 +4013,13 @@ static void _tcpm_cc_change(struct tcpm_port *port, enum typec_cc_status cc1,
* Ignore it.
*/
break;
+ case FR_SWAP_SEND:
+ case FR_SWAP_SEND_TIMEOUT:
+ case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF:
+ case FR_SWAP_SNK_SRC_NEW_SINK_READY:
+ case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED:
+ /* Do nothing, CC change expected */
+ break;
case PORT_RESET:
case PORT_RESET_WAIT_OFF:
@@ -3938,6 +4090,9 @@ static void _tcpm_pd_vbus_on(struct tcpm_port *port)
case SRC_TRY_DEBOUNCE:
/* Do nothing, waiting for sink detection */
break;
+ case FR_SWAP_SNK_SRC_NEW_SINK_READY:
+ tcpm_set_state(port, FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED, 0);
+ break;
case PORT_RESET:
case PORT_RESET_WAIT_OFF:
@@ -4017,6 +4172,14 @@ static void _tcpm_pd_vbus_off(struct tcpm_port *port)
*/
break;
+ case FR_SWAP_SEND:
+ case FR_SWAP_SEND_TIMEOUT:
+ case FR_SWAP_SNK_SRC_TRANSITION_TO_OFF:
+ case FR_SWAP_SNK_SRC_NEW_SINK_READY:
+ case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED:
+ /* Do nothing, vbus drop expected */
+ break;
+
default:
if (port->pwr_role == TYPEC_SINK &&
port->attached)
@@ -4041,7 +4204,7 @@ static void _tcpm_pd_hard_reset(struct tcpm_port *port)
0);
}
-static void tcpm_pd_event_handler(struct work_struct *work)
+static void tcpm_pd_event_handler(struct kthread_work *work)
{
struct tcpm_port *port = container_of(work, struct tcpm_port,
event_work);
@@ -4071,6 +4234,25 @@ static void tcpm_pd_event_handler(struct work_struct *work)
if (port->tcpc->get_cc(port->tcpc, &cc1, &cc2) == 0)
_tcpm_cc_change(port, cc1, cc2);
}
+ if (events & TCPM_FRS_EVENT) {
+ if (port->state == SNK_READY)
+ tcpm_set_state(port, FR_SWAP_SEND, 0);
+ else
+ tcpm_log(port, "Discarding FRS_SIGNAL! Not in sink ready");
+ }
+ if (events & TCPM_SOURCING_VBUS) {
+ tcpm_log(port, "sourcing vbus");
+ /*
+ * In fast role swap case TCPC autonomously sources vbus. Set vbus_source
+ * true as TCPM wouldn't have called tcpm_set_vbus.
+ *
+ * When vbus is sourced on the command on TCPM i.e. TCPM called
+ * tcpm_set_vbus to source vbus, vbus_source would already be true.
+ */
+ port->vbus_source = true;
+ _tcpm_pd_vbus_on(port);
+ }
+
spin_lock(&port->pd_event_lock);
}
spin_unlock(&port->pd_event_lock);
@@ -4082,7 +4264,7 @@ void tcpm_cc_change(struct tcpm_port *port)
spin_lock(&port->pd_event_lock);
port->pd_events |= TCPM_CC_EVENT;
spin_unlock(&port->pd_event_lock);
- queue_work(port->wq, &port->event_work);
+ kthread_queue_work(port->wq, &port->event_work);
}
EXPORT_SYMBOL_GPL(tcpm_cc_change);
@@ -4091,7 +4273,7 @@ void tcpm_vbus_change(struct tcpm_port *port)
spin_lock(&port->pd_event_lock);
port->pd_events |= TCPM_VBUS_EVENT;
spin_unlock(&port->pd_event_lock);
- queue_work(port->wq, &port->event_work);
+ kthread_queue_work(port->wq, &port->event_work);
}
EXPORT_SYMBOL_GPL(tcpm_vbus_change);
@@ -4100,10 +4282,54 @@ void tcpm_pd_hard_reset(struct tcpm_port *port)
spin_lock(&port->pd_event_lock);
port->pd_events = TCPM_RESET_EVENT;
spin_unlock(&port->pd_event_lock);
- queue_work(port->wq, &port->event_work);
+ kthread_queue_work(port->wq, &port->event_work);
}
EXPORT_SYMBOL_GPL(tcpm_pd_hard_reset);
+void tcpm_sink_frs(struct tcpm_port *port)
+{
+ spin_lock(&port->pd_event_lock);
+ port->pd_events = TCPM_FRS_EVENT;
+ spin_unlock(&port->pd_event_lock);
+ kthread_queue_work(port->wq, &port->event_work);
+}
+EXPORT_SYMBOL_GPL(tcpm_sink_frs);
+
+void tcpm_sourcing_vbus(struct tcpm_port *port)
+{
+ spin_lock(&port->pd_event_lock);
+ port->pd_events = TCPM_SOURCING_VBUS;
+ spin_unlock(&port->pd_event_lock);
+ kthread_queue_work(port->wq, &port->event_work);
+}
+EXPORT_SYMBOL_GPL(tcpm_sourcing_vbus);
+
+static void tcpm_enable_frs_work(struct kthread_work *work)
+{
+ struct tcpm_port *port = container_of(work, struct tcpm_port, enable_frs);
+
+ mutex_lock(&port->lock);
+ /* Not FRS capable */
+ if (!port->connected || port->port_type != TYPEC_PORT_DRP ||
+ port->pwr_opmode != TYPEC_PWR_MODE_PD ||
+ !port->tcpc->enable_frs ||
+ /* Sink caps queried */
+ port->sink_cap_done || port->negotiated_rev < PD_REV30)
+ goto unlock;
+
+ /* Send when the state machine is idle */
+ if (port->state != SNK_READY || port->vdm_state != VDM_STATE_DONE || port->send_discover)
+ goto resched;
+
+ tcpm_set_state(port, GET_SINK_CAP, 0);
+ port->sink_cap_done = true;
+
+resched:
+ mod_enable_frs_delayed_work(port, GET_SINK_CAP_RETRY_MS);
+unlock:
+ mutex_unlock(&port->lock);
+}
+
static int tcpm_dr_set(struct typec_port *p, enum typec_data_role data)
{
struct tcpm_port *port = typec_get_drvdata(p);
@@ -4511,7 +4737,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port,
{
const char *cap_str;
int ret;
- u32 mw;
+ u32 mw, frs_current;
if (!fwnode)
return -EINVAL;
@@ -4580,6 +4806,13 @@ sink:
port->self_powered = fwnode_property_read_bool(fwnode, "self-powered");
+ /* FRS can only be supported byb DRP ports */
+ if (port->port_type == TYPEC_PORT_DRP) {
+ ret = fwnode_property_read_u32(fwnode, "frs-typec-current", &frs_current);
+ if (ret >= 0 && frs_current <= FRS_5V_3A)
+ port->frs_current = frs_current;
+ }
+
return 0;
}
@@ -4808,6 +5041,30 @@ static int devm_tcpm_psy_register(struct tcpm_port *port)
return PTR_ERR_OR_ZERO(port->psy);
}
+static enum hrtimer_restart state_machine_timer_handler(struct hrtimer *timer)
+{
+ struct tcpm_port *port = container_of(timer, struct tcpm_port, state_machine_timer);
+
+ kthread_queue_work(port->wq, &port->state_machine);
+ return HRTIMER_NORESTART;
+}
+
+static enum hrtimer_restart vdm_state_machine_timer_handler(struct hrtimer *timer)
+{
+ struct tcpm_port *port = container_of(timer, struct tcpm_port, vdm_state_machine_timer);
+
+ kthread_queue_work(port->wq, &port->vdm_state_machine);
+ return HRTIMER_NORESTART;
+}
+
+static enum hrtimer_restart enable_frs_timer_handler(struct hrtimer *timer)
+{
+ struct tcpm_port *port = container_of(timer, struct tcpm_port, enable_frs_timer);
+
+ kthread_queue_work(port->wq, &port->enable_frs);
+ return HRTIMER_NORESTART;
+}
+
struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc)
{
struct tcpm_port *port;
@@ -4829,12 +5086,21 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc)
mutex_init(&port->lock);
mutex_init(&port->swap_lock);
- port->wq = create_singlethread_workqueue(dev_name(dev));
- if (!port->wq)
- return ERR_PTR(-ENOMEM);
- INIT_DELAYED_WORK(&port->state_machine, tcpm_state_machine_work);
- INIT_DELAYED_WORK(&port->vdm_state_machine, vdm_state_machine_work);
- INIT_WORK(&port->event_work, tcpm_pd_event_handler);
+ port->wq = kthread_create_worker(0, dev_name(dev));
+ if (IS_ERR(port->wq))
+ return ERR_CAST(port->wq);
+ sched_set_fifo(port->wq->task);
+
+ kthread_init_work(&port->state_machine, tcpm_state_machine_work);
+ kthread_init_work(&port->vdm_state_machine, vdm_state_machine_work);
+ kthread_init_work(&port->event_work, tcpm_pd_event_handler);
+ kthread_init_work(&port->enable_frs, tcpm_enable_frs_work);
+ hrtimer_init(&port->state_machine_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ port->state_machine_timer.function = state_machine_timer_handler;
+ hrtimer_init(&port->vdm_state_machine_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ port->vdm_state_machine_timer.function = vdm_state_machine_timer_handler;
+ hrtimer_init(&port->enable_frs_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ port->enable_frs_timer.function = enable_frs_timer_handler;
spin_lock_init(&port->pd_event_lock);
@@ -4886,7 +5152,7 @@ out_role_sw_put:
usb_role_switch_put(port->role_sw);
out_destroy_wq:
tcpm_debugfs_exit(port);
- destroy_workqueue(port->wq);
+ kthread_destroy_worker(port->wq);
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(tcpm_register_port);
@@ -4901,7 +5167,7 @@ void tcpm_unregister_port(struct tcpm_port *port)
typec_unregister_port(port->typec_port);
usb_role_switch_put(port->role_sw);
tcpm_debugfs_exit(port);
- destroy_workqueue(port->wq);
+ kthread_destroy_worker(port->wq);
}
EXPORT_SYMBOL_GPL(tcpm_unregister_port);
diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c
index e4b96674c405..4ce6c6a45eb1 100644
--- a/drivers/usb/usbip/usbip_common.c
+++ b/drivers/usb/usbip/usbip_common.c
@@ -755,13 +755,7 @@ EXPORT_SYMBOL_GPL(usbip_recv_xbuff);
static int __init usbip_core_init(void)
{
- int ret;
-
- ret = usbip_init_eh();
- if (ret)
- return ret;
-
- return 0;
+ return usbip_init_eh();
}
static void __exit usbip_core_exit(void)
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 1b598db5d8b9..66cde5e5f796 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -797,8 +797,14 @@ no_need_xmit:
usb_hcd_unlink_urb_from_ep(hcd, urb);
no_need_unlink:
spin_unlock_irqrestore(&vhci->lock, flags);
- if (!ret)
+ if (!ret) {
+ /* usb_hcd_giveback_urb() should be called with
+ * irqs disabled
+ */
+ local_irq_disable();
usb_hcd_giveback_urb(hcd, urb, urb->status);
+ local_irq_enable();
+ }
return ret;
}
diff --git a/include/dt-bindings/phy/phy-cadence-torrent.h b/include/dt-bindings/phy/phy-cadence-torrent.h
new file mode 100644
index 000000000000..e387b6a95741
--- /dev/null
+++ b/include/dt-bindings/phy/phy-cadence-torrent.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for Cadence Torrent SERDES.
+ */
+
+#ifndef _DT_BINDINGS_TORRENT_SERDES_H
+#define _DT_BINDINGS_TORRENT_SERDES_H
+
+#define TORRENT_SERDES_NO_SSC 0
+#define TORRENT_SERDES_EXTERNAL_SSC 1
+#define TORRENT_SERDES_INTERNAL_SSC 2
+
+#endif /* _DT_BINDINGS_TORRENT_SERDES_H */
diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h
index 36e8c241cf48..887a31b250a8 100644
--- a/include/dt-bindings/phy/phy.h
+++ b/include/dt-bindings/phy/phy.h
@@ -19,5 +19,6 @@
#define PHY_TYPE_DP 6
#define PHY_TYPE_XPCS 7
#define PHY_TYPE_SGMII 8
+#define PHY_TYPE_QSGMII 9
#endif /* _DT_BINDINGS_PHY */
diff --git a/include/dt-bindings/reset/raspberrypi,firmware-reset.h b/include/dt-bindings/reset/raspberrypi,firmware-reset.h
new file mode 100644
index 000000000000..1a4f4c792723
--- /dev/null
+++ b/include/dt-bindings/reset/raspberrypi,firmware-reset.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Nicolas Saenz Julienne
+ * Author: Nicolas Saenz Julienne <nsaenzjulienne@suse.com>
+ */
+
+#ifndef _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H
+#define _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H
+
+#define RASPBERRYPI_FIRMWARE_RESET_ID_USB 0
+#define RASPBERRYPI_FIRMWARE_RESET_NUM_IDS 1
+
+#endif
diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h
index bc89ac625f26..2c8860e406bd 100644
--- a/include/linux/iopoll.h
+++ b/include/linux/iopoll.h
@@ -60,8 +60,7 @@
/**
* read_poll_timeout_atomic - Periodically poll an address until a condition is
* met or a timeout occurs
- * @op: accessor function (takes @addr as its only argument)
- * @addr: Address to poll
+ * @op: accessor function (takes @args as its arguments)
* @val: Variable to read the value into
* @cond: Break condition (usually involving @val)
* @delay_us: Time to udelay between reads in us (0 tight-loops). Should
@@ -69,6 +68,7 @@
* Documentation/timers/timers-howto.rst).
* @timeout_us: Timeout in us, 0 means never timeout
* @delay_before_read: if it is true, delay @delay_us before read.
+ * @args: arguments for @op poll
*
* Returns 0 on success and -ETIMEDOUT upon a timeout. In either
* case, the last read value at @args is stored in @val.
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index bcee8eba62b3..e435bdb0bab3 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -115,10 +115,12 @@ struct phy_ops {
/**
* struct phy_attrs - represents phy attributes
* @bus_width: Data path width implemented by PHY
+ * @max_link_rate: Maximum link rate supported by PHY (in Mbps)
* @mode: PHY mode
*/
struct phy_attrs {
u32 bus_width;
+ u32 max_link_rate;
enum phy_mode mode;
};
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 20c555db4621..7d72c4e0713c 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1764,6 +1764,7 @@ static inline int usb_urb_dir_out(struct urb *urb)
return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT;
}
+int usb_pipe_type_check(struct usb_device *dev, unsigned int pipe);
int usb_urb_ep_type_check(const struct urb *urb);
void *usb_alloc_coherent(struct usb_device *dev, size_t size,
@@ -1801,6 +1802,14 @@ extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
int timeout);
/* wrappers around usb_control_msg() for the most common standard requests */
+int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request,
+ __u8 requesttype, __u16 value, __u16 index,
+ const void *data, __u16 size, int timeout,
+ gfp_t memflags);
+int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request,
+ __u8 requesttype, __u16 value, __u16 index,
+ void *data, __u16 size, int timeout,
+ gfp_t memflags);
extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype,
unsigned char descindex, void *buf, int size);
extern int usb_get_status(struct usb_device *dev,
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 52ce1f6b8f83..e7351d64f11f 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -436,6 +436,7 @@ struct usb_gadget {
};
#define work_to_gadget(w) (container_of((w), struct usb_gadget, work))
+/* Interface to the device model */
static inline void set_gadget_data(struct usb_gadget *gadget, void *data)
{ dev_set_drvdata(&gadget->dev, data); }
static inline void *get_gadget_data(struct usb_gadget *gadget)
@@ -444,6 +445,26 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
{
return container_of(dev, struct usb_gadget, dev);
}
+static inline struct usb_gadget *usb_get_gadget(struct usb_gadget *gadget)
+{
+ get_device(&gadget->dev);
+ return gadget;
+}
+static inline void usb_put_gadget(struct usb_gadget *gadget)
+{
+ put_device(&gadget->dev);
+}
+extern void usb_initialize_gadget(struct device *parent,
+ struct usb_gadget *gadget, void (*release)(struct device *dev));
+extern int usb_add_gadget(struct usb_gadget *gadget);
+extern void usb_del_gadget(struct usb_gadget *gadget);
+
+/* Legacy device-model interface */
+extern int usb_add_gadget_udc_release(struct device *parent,
+ struct usb_gadget *gadget, void (*release)(struct device *dev));
+extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
+extern void usb_del_gadget_udc(struct usb_gadget *gadget);
+extern char *usb_get_gadget_udc_name(void);
/* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */
#define gadget_for_each_ep(tmp, gadget) \
@@ -735,12 +756,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver);
*/
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);
-extern int usb_add_gadget_udc_release(struct device *parent,
- struct usb_gadget *gadget, void (*release)(struct device *dev));
-extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
-extern void usb_del_gadget_udc(struct usb_gadget *gadget);
-extern char *usb_get_gadget_udc_name(void);
-
/*-------------------------------------------------------------------------*/
/* utility to simplify dealing with string descriptors */
diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h
index b6c233e79bd4..3a805e2ecbc9 100644
--- a/include/linux/usb/pd.h
+++ b/include/linux/usb/pd.h
@@ -219,14 +219,16 @@ enum pd_pdo_type {
#define PDO_CURR_MASK 0x3ff
#define PDO_PWR_MASK 0x3ff
-#define PDO_FIXED_DUAL_ROLE BIT(29) /* Power role swap supported */
-#define PDO_FIXED_SUSPEND BIT(28) /* USB Suspend supported (Source) */
-#define PDO_FIXED_HIGHER_CAP BIT(28) /* Requires more than vSafe5V (Sink) */
-#define PDO_FIXED_EXTPOWER BIT(27) /* Externally powered */
-#define PDO_FIXED_USB_COMM BIT(26) /* USB communications capable */
-#define PDO_FIXED_DATA_SWAP BIT(25) /* Data role swap supported */
-#define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */
-#define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */
+#define PDO_FIXED_DUAL_ROLE BIT(29) /* Power role swap supported */
+#define PDO_FIXED_SUSPEND BIT(28) /* USB Suspend supported (Source) */
+#define PDO_FIXED_HIGHER_CAP BIT(28) /* Requires more than vSafe5V (Sink) */
+#define PDO_FIXED_EXTPOWER BIT(27) /* Externally powered */
+#define PDO_FIXED_USB_COMM BIT(26) /* USB communications capable */
+#define PDO_FIXED_DATA_SWAP BIT(25) /* Data role swap supported */
+#define PDO_FIXED_FRS_CURR_MASK (BIT(24) | BIT(23)) /* FR_Swap Current (Sink) */
+#define PDO_FIXED_FRS_CURR_SHIFT 23
+#define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */
+#define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */
#define PDO_FIXED_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT)
#define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT)
@@ -454,6 +456,7 @@ static inline unsigned int rdo_max_power(u32 rdo)
#define PD_T_DB_DETECT 10000 /* 10 - 15 seconds */
#define PD_T_SEND_SOURCE_CAP 150 /* 100 - 200 ms */
#define PD_T_SENDER_RESPONSE 60 /* 24 - 30 ms, relaxed */
+#define PD_T_RECEIVER_RESPONSE 15 /* 15ms max */
#define PD_T_SOURCE_ACTIVITY 45
#define PD_T_SINK_ACTIVITY 135
#define PD_T_SINK_WAIT_CAP 240
@@ -471,8 +474,10 @@ static inline unsigned int rdo_max_power(u32 rdo)
#define PD_T_VCONN_SOURCE_ON 100
#define PD_T_SINK_REQUEST 100 /* 100 ms minimum */
#define PD_T_ERROR_RECOVERY 100 /* minimum 25 is insufficient */
-#define PD_T_SRCSWAPSTDBY 625 /* Maximum of 650ms */
-#define PD_T_NEWSRC 250 /* Maximum of 275ms */
+#define PD_T_SRCSWAPSTDBY 625 /* Maximum of 650ms */
+#define PD_T_NEWSRC 250 /* Maximum of 275ms */
+#define PD_T_SWAP_SRC_START 20 /* Minimum of 20ms */
+#define PD_T_BIST_CONT_MODE 50 /* 30 - 60 ms */
#define PD_T_DRP_TRY 100 /* 75 - 150 ms */
#define PD_T_DRP_TRYWAIT 600 /* 400 - 800 ms */
@@ -483,5 +488,4 @@ static inline unsigned int rdo_max_power(u32 rdo)
#define PD_N_CAPS_COUNT (PD_T_NO_RESPONSE / PD_T_SEND_SOURCE_CAP)
#define PD_N_HARD_RESET_COUNT 2
-#define PD_T_BIST_CONT_MODE 50 /* 30 - 60 ms */
#endif /* __LINUX_USB_PD_H */
diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h
index 89f58760cf48..09762d26fa0c 100644
--- a/include/linux/usb/tcpm.h
+++ b/include/linux/usb/tcpm.h
@@ -78,8 +78,11 @@ enum tcpm_transmit_type {
* automatically if a connection is established.
* @try_role: Optional; called to set a preferred role
* @pd_transmit:Called to transmit PD message
- * @mux: Pointer to multiplexer data
* @set_bist_data: Turn on/off bist data mode for compliance testing
+ * @enable_frs:
+ * Optional; Called to enable/disable PD 3.0 fast role swap.
+ * Enabling frs is accessory dependent as not all PD3.0
+ * accessories support fast role swap.
*/
struct tcpc_dev {
struct fwnode_handle *fwnode;
@@ -105,6 +108,7 @@ struct tcpc_dev {
int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type,
const struct pd_message *msg);
int (*set_bist_data)(struct tcpc_dev *dev, bool on);
+ int (*enable_frs)(struct tcpc_dev *dev, bool enable);
};
struct tcpm_port;
@@ -114,6 +118,8 @@ void tcpm_unregister_port(struct tcpm_port *port);
void tcpm_vbus_change(struct tcpm_port *port);
void tcpm_cc_change(struct tcpm_port *port);
+void tcpm_sink_frs(struct tcpm_port *port);
+void tcpm_sourcing_vbus(struct tcpm_port *port);
void tcpm_pd_receive(struct tcpm_port *port,
const struct pd_message *msg);
void tcpm_pd_transmit_complete(struct tcpm_port *port,
diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
index 9cb1bec94b71..6be558045942 100644
--- a/include/linux/usb/typec.h
+++ b/include/linux/usb/typec.h
@@ -268,6 +268,7 @@ int typec_set_mode(struct typec_port *port, int mode);
void *typec_get_drvdata(struct typec_port *port);
+int typec_find_pwr_opmode(const char *name);
int typec_find_orientation(const char *name);
int typec_find_port_power_role(const char *name);
int typec_find_power_role(const char *name);
diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index 3025aca3c358..cc9cdbc66403 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -10,7 +10,6 @@
#include <linux/of_device.h>
struct rpi_firmware;
-struct pci_dev;
enum rpi_firmware_property_status {
RPI_FIRMWARE_STATUS_REQUEST = 0,
@@ -142,7 +141,6 @@ int rpi_firmware_property(struct rpi_firmware *fw,
int rpi_firmware_property_list(struct rpi_firmware *fw,
void *data, size_t tag_size);
struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node);
-int rpi_firmware_init_vl805(struct pci_dev *pdev);
#else
static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag,
void *data, size_t len)
@@ -160,11 +158,6 @@ static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware
{
return NULL;
}
-
-static inline int rpi_firmware_init_vl805(struct pci_dev *pdev)
-{
- return 0;
-}
#endif
#endif /* __SOC_RASPBERRY_FIRMWARE_H__ */
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
index 69137c14d0dc..8981e61f2da4 100644
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -158,29 +158,17 @@ static int usb6fire_fw_ihex_init(const struct firmware *fw,
static int usb6fire_fw_ezusb_write(struct usb_device *device,
int type, int value, char *data, int len)
{
- int ret;
-
- ret = usb_control_msg(device, usb_sndctrlpipe(device, 0), type,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, 0, data, len, HZ);
- if (ret < 0)
- return ret;
- else if (ret != len)
- return -EIO;
- return 0;
+ return usb_control_msg_send(device, 0, type,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, 0, data, len, HZ, GFP_KERNEL);
}
static int usb6fire_fw_ezusb_read(struct usb_device *device,
int type, int value, char *data, int len)
{
- int ret = usb_control_msg(device, usb_rcvctrlpipe(device, 0), type,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value,
- 0, data, len, HZ);
- if (ret < 0)
- return ret;
- else if (ret != len)
- return -EIO;
- return 0;
+ return usb_control_msg_recv(device, 0, type,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, 0, data, len, HZ, GFP_KERNEL);
}
static int usb6fire_fw_fpga_write(struct usb_device *device,
@@ -230,7 +218,7 @@ static int usb6fire_fw_ezusb_upload(
/* upload firmware image */
data = 0x01; /* stop ezusb cpu */
ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1);
- if (ret < 0) {
+ if (ret) {
kfree(rec);
release_firmware(fw);
dev_err(&intf->dev,
@@ -242,7 +230,7 @@ static int usb6fire_fw_ezusb_upload(
while (usb6fire_fw_ihex_next_record(rec)) { /* write firmware */
ret = usb6fire_fw_ezusb_write(device, 0xa0, rec->address,
rec->data, rec->len);
- if (ret < 0) {
+ if (ret) {
kfree(rec);
release_firmware(fw);
dev_err(&intf->dev,
@@ -257,7 +245,7 @@ static int usb6fire_fw_ezusb_upload(
if (postdata) { /* write data after firmware has been uploaded */
ret = usb6fire_fw_ezusb_write(device, 0xa0, postaddr,
postdata, postlen);
- if (ret < 0) {
+ if (ret) {
dev_err(&intf->dev,
"unable to upload ezusb firmware %s: post urb.\n",
fwname);
@@ -267,7 +255,7 @@ static int usb6fire_fw_ezusb_upload(
data = 0x00; /* resume ezusb cpu */
ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1);
- if (ret < 0) {
+ if (ret) {
dev_err(&intf->dev,
"unable to upload ezusb firmware %s: end message.\n",
fwname);
@@ -302,7 +290,7 @@ static int usb6fire_fw_fpga_upload(
end = fw->data + fw->size;
ret = usb6fire_fw_ezusb_write(device, 8, 0, NULL, 0);
- if (ret < 0) {
+ if (ret) {
kfree(buffer);
release_firmware(fw);
dev_err(&intf->dev,
@@ -327,7 +315,7 @@ static int usb6fire_fw_fpga_upload(
kfree(buffer);
ret = usb6fire_fw_ezusb_write(device, 9, 0, NULL, 0);
- if (ret < 0) {
+ if (ret) {
dev_err(&intf->dev,
"unable to upload fpga firmware: end urb.\n");
return ret;
@@ -363,7 +351,7 @@ int usb6fire_fw_init(struct usb_interface *intf)
u8 buffer[12];
ret = usb6fire_fw_ezusb_read(device, 1, 0, buffer, 8);
- if (ret < 0) {
+ if (ret) {
dev_err(&intf->dev,
"unable to receive device firmware state.\n");
return ret;
diff --git a/sound/usb/helper.c b/sound/usb/helper.c
index 4c12cc5b53fd..cf92d7110773 100644
--- a/sound/usb/helper.c
+++ b/sound/usb/helper.c
@@ -63,20 +63,6 @@ void *snd_usb_find_csint_desc(void *buffer, int buflen, void *after, u8 dsubtype
return NULL;
}
-/* check the validity of pipe and EP types */
-int snd_usb_pipe_sanity_check(struct usb_device *dev, unsigned int pipe)
-{
- static const int pipetypes[4] = {
- PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
- };
- struct usb_host_endpoint *ep;
-
- ep = usb_pipe_endpoint(dev, pipe);
- if (!ep || usb_pipetype(pipe) != pipetypes[usb_endpoint_type(&ep->desc)])
- return -EINVAL;
- return 0;
-}
-
/*
* Wrapper for usb_control_msg().
* Allocates a temp buffer to prevent dmaing from/to the stack.
@@ -89,7 +75,7 @@ int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe, __u8 request,
void *buf = NULL;
int timeout;
- if (snd_usb_pipe_sanity_check(dev, pipe))
+ if (usb_pipe_type_check(dev, pipe))
return -EINVAL;
if (size > 0) {
diff --git a/sound/usb/helper.h b/sound/usb/helper.h
index 5e8a18b4e7b9..f5b4c6647e4d 100644
--- a/sound/usb/helper.h
+++ b/sound/usb/helper.h
@@ -7,7 +7,6 @@ unsigned int snd_usb_combine_bytes(unsigned char *bytes, int size);
void *snd_usb_find_desc(void *descstart, int desclen, void *after, u8 dtype);
void *snd_usb_find_csint_desc(void *descstart, int desclen, void *after, u8 dsubtype);
-int snd_usb_pipe_sanity_check(struct usb_device *dev, unsigned int pipe);
int snd_usb_ctl_msg(struct usb_device *dev, unsigned int pipe,
__u8 request, __u8 requesttype, __u16 value, __u16 index,
void *data, __u16 size);
diff --git a/sound/usb/hiface/pcm.c b/sound/usb/hiface/pcm.c
index a148caa5f48e..d942179ca095 100644
--- a/sound/usb/hiface/pcm.c
+++ b/sound/usb/hiface/pcm.c
@@ -156,16 +156,14 @@ static int hiface_pcm_set_rate(struct pcm_runtime *rt, unsigned int rate)
* This control message doesn't have any ack from the
* other side
*/
- ret = usb_control_msg(device, usb_sndctrlpipe(device, 0),
- HIFACE_SET_RATE_REQUEST,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
- rate_value, 0, NULL, 0, 100);
- if (ret < 0) {
+ ret = usb_control_msg_send(device, 0,
+ HIFACE_SET_RATE_REQUEST,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+ rate_value, 0, NULL, 0, 100, GFP_KERNEL);
+ if (ret)
dev_err(&device->dev, "Error setting samplerate %d.\n", rate);
- return ret;
- }
- return 0;
+ return ret;
}
static struct pcm_substream *hiface_pcm_get_substream(struct snd_pcm_substream
diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
index 60674ce4879b..a030dd65eb28 100644
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -337,23 +337,18 @@ int line6_read_data(struct usb_line6 *line6, unsigned address, void *data,
{
struct usb_device *usbdev = line6->usbdev;
int ret;
- unsigned char *len;
+ u8 len;
unsigned count;
if (address > 0xffff || datalen > 0xff)
return -EINVAL;
- len = kmalloc(1, GFP_KERNEL);
- if (!len)
- return -ENOMEM;
-
/* query the serial number: */
- ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- (datalen << 8) | 0x21, address,
- NULL, 0, LINE6_TIMEOUT * HZ);
-
- if (ret < 0) {
+ ret = usb_control_msg_send(usbdev, 0, 0x67,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+ (datalen << 8) | 0x21, address, NULL, 0,
+ LINE6_TIMEOUT * HZ, GFP_KERNEL);
+ if (ret) {
dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
goto exit;
}
@@ -362,45 +357,42 @@ int line6_read_data(struct usb_line6 *line6, unsigned address, void *data,
for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
mdelay(LINE6_READ_WRITE_STATUS_DELAY);
- ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE |
- USB_DIR_IN,
- 0x0012, 0x0000, len, 1,
- LINE6_TIMEOUT * HZ);
- if (ret < 0) {
+ ret = usb_control_msg_recv(usbdev, 0, 0x67,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x0012, 0x0000, &len, 1,
+ LINE6_TIMEOUT * HZ, GFP_KERNEL);
+ if (ret) {
dev_err(line6->ifcdev,
"receive length failed (error %d)\n", ret);
goto exit;
}
- if (*len != 0xff)
+ if (len != 0xff)
break;
}
ret = -EIO;
- if (*len == 0xff) {
+ if (len == 0xff) {
dev_err(line6->ifcdev, "read failed after %d retries\n",
count);
goto exit;
- } else if (*len != datalen) {
+ } else if (len != datalen) {
/* should be equal or something went wrong */
dev_err(line6->ifcdev,
"length mismatch (expected %d, got %d)\n",
- (int)datalen, (int)*len);
+ (int)datalen, len);
goto exit;
}
/* receive the result: */
- ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
- 0x0013, 0x0000, data, datalen,
- LINE6_TIMEOUT * HZ);
-
- if (ret < 0)
+ ret = usb_control_msg_recv(usbdev, 0, 0x67,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x0013, 0x0000, data, datalen, LINE6_TIMEOUT * HZ,
+ GFP_KERNEL);
+ if (ret)
dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
exit:
- kfree(len);
return ret;
}
EXPORT_SYMBOL_GPL(line6_read_data);
@@ -423,12 +415,11 @@ int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
if (!status)
return -ENOMEM;
- ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- 0x0022, address, data, datalen,
- LINE6_TIMEOUT * HZ);
-
- if (ret < 0) {
+ ret = usb_control_msg_send(usbdev, 0, 0x67,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+ 0x0022, address, data, datalen, LINE6_TIMEOUT * HZ,
+ GFP_KERNEL);
+ if (ret) {
dev_err(line6->ifcdev,
"write request failed (error %d)\n", ret);
goto exit;
@@ -437,14 +428,11 @@ int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
mdelay(LINE6_READ_WRITE_STATUS_DELAY);
- ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
- 0x67,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE |
- USB_DIR_IN,
- 0x0012, 0x0000,
- status, 1, LINE6_TIMEOUT * HZ);
-
- if (ret < 0) {
+ ret = usb_control_msg_recv(usbdev, 0, 0x67,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ 0x0012, 0x0000, status, 1, LINE6_TIMEOUT * HZ,
+ GFP_KERNEL);
+ if (ret) {
dev_err(line6->ifcdev,
"receiving status failed (error %d)\n", ret);
goto exit;
diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c
index eef45f7fef0d..28794a35949d 100644
--- a/sound/usb/line6/podhd.c
+++ b/sound/usb/line6/podhd.c
@@ -183,29 +183,25 @@ static const struct attribute_group podhd_dev_attr_group = {
static int podhd_dev_start(struct usb_line6_podhd *pod)
{
int ret;
- u8 *init_bytes;
+ u8 init_bytes[8];
int i;
struct usb_device *usbdev = pod->line6.usbdev;
- init_bytes = kmalloc(8, GFP_KERNEL);
- if (!init_bytes)
- return -ENOMEM;
-
- ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0),
+ ret = usb_control_msg_send(usbdev, 0,
0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
0x11, 0,
- NULL, 0, LINE6_TIMEOUT * HZ);
- if (ret < 0) {
+ NULL, 0, LINE6_TIMEOUT * HZ, GFP_KERNEL);
+ if (ret) {
dev_err(pod->line6.ifcdev, "read request failed (error %d)\n", ret);
goto exit;
}
/* NOTE: looks like some kind of ping message */
- ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
+ ret = usb_control_msg_recv(usbdev, 0, 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x11, 0x0,
- init_bytes, 3, LINE6_TIMEOUT * HZ);
- if (ret < 0) {
+ init_bytes, 3, LINE6_TIMEOUT * HZ, GFP_KERNEL);
+ if (ret) {
dev_err(pod->line6.ifcdev,
"receive length failed (error %d)\n", ret);
goto exit;
@@ -220,13 +216,12 @@ static int podhd_dev_start(struct usb_line6_podhd *pod)
goto exit;
}
- ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0),
+ ret = usb_control_msg_send(usbdev, 0,
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE | USB_DIR_OUT,
1, 0,
- NULL, 0, LINE6_TIMEOUT * HZ);
+ NULL, 0, LINE6_TIMEOUT * HZ, GFP_KERNEL);
exit:
- kfree(init_bytes);
return ret;
}
diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c
index 94dd5e7ab2e6..4e5693c97aa4 100644
--- a/sound/usb/line6/toneport.c
+++ b/sound/usb/line6/toneport.c
@@ -126,11 +126,12 @@ static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
{
int ret;
- ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
- USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ);
+ ret = usb_control_msg_send(usbdev, 0, 0x67,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+ cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ,
+ GFP_KERNEL);
- if (ret < 0) {
+ if (ret) {
dev_err(&usbdev->dev, "send failed (error %d)\n", ret);
return ret;
}
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index 0ffff7640892..9609c6d9655c 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -1978,7 +1978,7 @@ static int scarlett2_mixer_status_create(struct usb_mixer_interface *mixer)
return 0;
}
- if (snd_usb_pipe_sanity_check(dev, pipe))
+ if (usb_pipe_type_check(dev, pipe))
return -EINVAL;
mixer->urb = usb_alloc_urb(0, GFP_KERNEL);
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 892296df131d..b4fa80ef730d 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -856,7 +856,7 @@ static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev)
static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 };
void *buf;
- if (snd_usb_pipe_sanity_check(dev, usb_sndintpipe(dev, 0x05)))
+ if (usb_pipe_type_check(dev, usb_sndintpipe(dev, 0x05)))
return -EINVAL;
buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL);
if (!buf)
@@ -885,8 +885,6 @@ static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
{
int ret;
- if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0)))
- return -EINVAL;
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 0, NULL, 0, 1000);
@@ -994,8 +992,6 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev)
dev_dbg(&dev->dev, "Waiting for Axe-Fx III to boot up...\n");
- if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0)))
- return -EINVAL;
/* If the Axe-Fx III has not fully booted, it will timeout when trying
* to enable the audio streaming interface. A more generous timeout is
* used here to detect when the Axe-Fx III has finished booting as the
@@ -1028,7 +1024,7 @@ static int snd_usb_motu_microbookii_communicate(struct usb_device *dev, u8 *buf,
{
int err, actual_length;
- if (snd_usb_pipe_sanity_check(dev, usb_sndintpipe(dev, 0x01)))
+ if (usb_pipe_type_check(dev, usb_sndintpipe(dev, 0x01)))
return -EINVAL;
err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x01), buf, *length,
&actual_length, 1000);
@@ -1040,7 +1036,7 @@ static int snd_usb_motu_microbookii_communicate(struct usb_device *dev, u8 *buf,
memset(buf, 0, buf_size);
- if (snd_usb_pipe_sanity_check(dev, usb_rcvintpipe(dev, 0x82)))
+ if (usb_pipe_type_check(dev, usb_rcvintpipe(dev, 0x82)))
return -EINVAL;
err = usb_interrupt_msg(dev, usb_rcvintpipe(dev, 0x82), buf, buf_size,
&actual_length, 1000);
@@ -1127,8 +1123,6 @@ static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev)
{
int ret;
- if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0)))
- return -EINVAL;
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x0, 0, NULL, 0, 1000);
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index f86f7a61fb36..6e1bfe894dd5 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -82,40 +82,13 @@ static int us144_create_usbmidi(struct snd_card *card)
&US122L(card)->midi_list, &quirk);
}
-/*
- * Wrapper for usb_control_msg().
- * Allocates a temp buffer to prevent dmaing from/to the stack.
- */
-static int us122l_ctl_msg(struct usb_device *dev, unsigned int pipe,
- __u8 request, __u8 requesttype,
- __u16 value, __u16 index, void *data,
- __u16 size, int timeout)
-{
- int err;
- void *buf = NULL;
-
- if (size > 0) {
- buf = kmemdup(data, size, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- }
- err = usb_control_msg(dev, pipe, request, requesttype,
- value, index, buf, size, timeout);
- if (size > 0) {
- memcpy(data, buf, size);
- kfree(buf);
- }
- return err;
-}
-
static void pt_info_set(struct usb_device *dev, u8 v)
{
int ret;
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
- 'I',
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- v, 0, NULL, 0, 1000);
+ ret = usb_control_msg_send(dev, 0, 'I',
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ v, 0, NULL, 0, 1000, GFP_NOIO);
snd_printdd(KERN_DEBUG "%i\n", ret);
}
@@ -305,10 +278,11 @@ static int us122l_set_sample_rate(struct usb_device *dev, int rate)
data[0] = rate;
data[1] = rate >> 8;
data[2] = rate >> 16;
- err = us122l_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
- USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
- UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, data, 3, 1000);
- if (err < 0)
+ err = usb_control_msg_send(dev, 0, UAC_SET_CUR,
+ USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+ UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep, data, 3,
+ 1000, GFP_NOIO);
+ if (err)
snd_printk(KERN_ERR "%d: cannot set freq %d to ep 0x%x\n",
dev->devnum, rate, ep);
return err;