diff options
| -rw-r--r-- | drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 23 | ||||
| -rw-r--r-- | drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c | 1 | ||||
| -rw-r--r-- | drivers/gpu/drm/rcar-du/rcar_du_plane.c | 18 | ||||
| -rw-r--r-- | drivers/gpu/drm/rcar-du/rcar_du_regs.h | 1 | ||||
| -rw-r--r-- | drivers/gpu/drm/rcar-du/rcar_du_vgacon.c | 1 |
5 files changed, 33 insertions, 11 deletions
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 86766cc6360a..25c7a998fc2c 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -155,12 +155,15 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc) mode->hsync_start - 1); rcar_du_crtc_write(rcrtc, HCR, mode->htotal - 1); - rcar_du_crtc_write(rcrtc, VDSR, mode->vtotal - mode->vsync_end - 2); - rcar_du_crtc_write(rcrtc, VDER, mode->vtotal - mode->vsync_end + - mode->vdisplay - 2); - rcar_du_crtc_write(rcrtc, VSPR, mode->vtotal - mode->vsync_end + - mode->vsync_start - 1); - rcar_du_crtc_write(rcrtc, VCR, mode->vtotal - 1); + rcar_du_crtc_write(rcrtc, VDSR, mode->crtc_vtotal - + mode->crtc_vsync_end - 2); + rcar_du_crtc_write(rcrtc, VDER, mode->crtc_vtotal - + mode->crtc_vsync_end + + mode->crtc_vdisplay - 2); + rcar_du_crtc_write(rcrtc, VSPR, mode->crtc_vtotal - + mode->crtc_vsync_end + + mode->crtc_vsync_start - 1); + rcar_du_crtc_write(rcrtc, VCR, mode->crtc_vtotal - 1); rcar_du_crtc_write(rcrtc, DESR, mode->htotal - mode->hsync_start); rcar_du_crtc_write(rcrtc, DEWR, mode->hdisplay); @@ -256,6 +259,7 @@ void rcar_du_crtc_update_planes(struct drm_crtc *crtc) static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc) { struct drm_crtc *crtc = &rcrtc->crtc; + bool interlaced; unsigned int i; if (rcrtc->started) @@ -291,7 +295,10 @@ static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc) * sync mode (with the HSYNC and VSYNC signals configured as outputs and * actively driven). */ - rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK, DSYSR_TVM_MASTER); + interlaced = rcrtc->crtc.mode.flags & DRM_MODE_FLAG_INTERLACE; + rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK | DSYSR_SCM_MASK, + (interlaced ? DSYSR_SCM_INT_VIDEO : 0) | + DSYSR_TVM_MASTER); rcar_du_group_start_stop(rcrtc->group, true); @@ -528,7 +535,7 @@ static irqreturn_t rcar_du_crtc_irq(int irq, void *arg) status = rcar_du_crtc_read(rcrtc, DSSR); rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK); - if (status & DSSR_VBK) { + if (status & DSSR_FRM) { drm_handle_vblank(rcrtc->crtc.dev, rcrtc->index); rcar_du_crtc_finish_page_flip(rcrtc); ret = IRQ_HANDLED; diff --git a/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c b/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c index 322b7208171a..ca94b029ac80 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c @@ -95,6 +95,7 @@ int rcar_du_hdmi_connector_init(struct rcar_du_device *rcdu, connector = &rcon->connector; connector->display_info.width_mm = 0; connector->display_info.height_mm = 0; + connector->interlace_allowed = true; connector->polled = DRM_CONNECTOR_POLL_HPD; ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs, diff --git a/drivers/gpu/drm/rcar-du/rcar_du_plane.c b/drivers/gpu/drm/rcar-du/rcar_du_plane.c index fb3ea4f95d4a..50f2f2b20d39 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c @@ -104,14 +104,22 @@ void rcar_du_plane_update_base(struct rcar_du_plane *plane) { struct rcar_du_group *rgrp = plane->group; unsigned int index = plane->hwindex; + bool interlaced; u32 mwr; - /* Memory pitch (expressed in pixels) */ + interlaced = plane->crtc->mode.flags & DRM_MODE_FLAG_INTERLACE; + + /* Memory pitch (expressed in pixels). Must be doubled for interlaced + * operation with 32bpp formats. + */ if (plane->format->planes == 2) mwr = plane->pitch; else mwr = plane->pitch * 8 / plane->format->bpp; + if (interlaced && plane->format->bpp == 32) + mwr *= 2; + rcar_du_plane_write(rgrp, index, PnMWR, mwr); /* The Y position is expressed in raster line units and must be doubled @@ -119,12 +127,16 @@ void rcar_du_plane_update_base(struct rcar_du_plane *plane) * doubling the Y position is found in the R8A7779 datasheet, but the * rule seems to apply there as well. * + * Despite not being documented, doubling seem not to be needed when + * operating in interlaced mode. + * * Similarly, for the second plane, NV12 and NV21 formats seem to - * require a halved Y position value. + * require a halved Y position value, in both progressive and interlaced + * modes. */ rcar_du_plane_write(rgrp, index, PnSPXR, plane->src_x); rcar_du_plane_write(rgrp, index, PnSPYR, plane->src_y * - (plane->format->bpp == 32 ? 2 : 1)); + (!interlaced && plane->format->bpp == 32 ? 2 : 1)); rcar_du_plane_write(rgrp, index, PnDSA0R, plane->dma[0]); if (plane->format->planes == 2) { diff --git a/drivers/gpu/drm/rcar-du/rcar_du_regs.h b/drivers/gpu/drm/rcar-du/rcar_du_regs.h index c3639d1db28b..70fcbc471ebd 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_regs.h +++ b/drivers/gpu/drm/rcar-du/rcar_du_regs.h @@ -34,6 +34,7 @@ #define DSYSR_SCM_INT_NONE (0 << 4) #define DSYSR_SCM_INT_SYNC (2 << 4) #define DSYSR_SCM_INT_VIDEO (3 << 4) +#define DSYSR_SCM_MASK (3 << 4) #define DSMR 0x00004 #define DSMR_VSPM (1 << 28) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c b/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c index 752747a5e920..9d4879921cc7 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c @@ -64,6 +64,7 @@ int rcar_du_vga_connector_init(struct rcar_du_device *rcdu, connector = &rcon->connector; connector->display_info.width_mm = 0; connector->display_info.height_mm = 0; + connector->interlace_allowed = true; ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs, DRM_MODE_CONNECTOR_VGA); |