Merge tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
  patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual

Noralf needs this for his tinydrm pull request.

* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
  drm/vc4: Remove vc4_debugfs_cleanup()
  dma/fence: Export enable-signaling tracepoint for emission by drivers
  drm/tilcdc: Remove tilcdc_debugfs_cleanup()
  drm/tegra: Remove tegra_debugfs_cleanup()
  drm/sti: Remove drm_debugfs_remove_files() calls
  drm/radeon: Remove drm_debugfs_remove_files() call
  drm/omap: Remove omap_debugfs_cleanup()
  drm/hdlcd: Remove hdlcd_debugfs_cleanup()
  drm/etnaviv: Remove etnaviv_debugfs_cleanup()
  drm/etnaviv: allow build with COMPILE_TEST
  drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
  drm/prime: Clarify DMA-BUF/GEM Object lifetime
  drm/ttm: Make sure BOs being swapped out are cacheable
  drm/atomic: Remove drm_atomic_debugfs_cleanup()
  drm: drm_minor_register(): Clean up debugfs on failure
  drm: debugfs: Remove all files automatically on cleanup
  drm/fourcc: add vivante tiled layout format modifiers
  drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
  drm/edid: Set AVI infoframe Q even when QS=0
  drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
  ...

25 files changed, 283 insertions, 228 deletions

diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index e5882d5a68e5..21a3a666a2fd 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -790,21 +790,6 @@ extern void drm_sysfs_hotplug_event(struct drm_device *dev);
 
 /*@}*/
 
-/* PCI section */
-static __inline__ int drm_pci_device_is_agp(struct drm_device *dev)
-{
-	if (dev->driver->device_is_agp != NULL) {
-		int err = (*dev->driver->device_is_agp) (dev);
-
-		if (err != 2) {
-			return err;
-		}
-	}
-
-	return pci_find_capability(dev->pdev, PCI_CAP_ID_AGP);
-}
-void drm_pci_agp_destroy(struct drm_device *dev);
-
 extern int drm_pci_init(struct drm_driver *driver, struct pci_driver *pdriver);
 extern void drm_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver);
 #ifdef CONFIG_PCI
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
index f96220ed4004..2e28fdca9c3d 100644
--- a/include/drm/drm_atomic.h
+++ b/include/drm/drm_atomic.h
@@ -123,7 +123,8 @@ struct drm_crtc_commit {
 	/**
 	 * @commit_entry:
 	 *
-	 * Entry on the per-CRTC commit_list. Protected by crtc->commit_lock.
+	 * Entry on the per-CRTC &drm_crtc.commit_list. Protected by
+	 * $drm_crtc.commit_lock.
 	 */
 	struct list_head commit_entry;
 
@@ -429,7 +430,8 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  *
  * For example if the CRTC mode has changed, and the hardware is able to enact
  * the requested mode change without going through a full modeset, the driver
- * should clear mode_changed during its ->atomic_check.
+ * should clear mode_changed in its &drm_mode_config_funcs.atomic_check
+ * implementation.
  */
 static inline bool
 drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state)
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index 9afcd3810785..d066e9491ae3 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -177,7 +177,8 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  *
  * This iterates over the current state, useful (for example) when applying
  * atomic state after it has been checked and swapped.  To iterate over the
- * planes which *will* be attached (for ->atomic_check()) see
+ * planes which *will* be attached (more useful in code called from
+ * &drm_mode_config_funcs.atomic_check) see
  * drm_atomic_crtc_state_for_each_plane().
  */
 #define drm_atomic_crtc_for_each_plane(plane, crtc) \
@@ -189,8 +190,9 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  * @crtc_state: the incoming crtc-state
  *
  * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
- * attached if the specified state is applied.  Useful during (for example)
- * ->atomic_check() operations, to validate the incoming state.
+ * attached if the specified state is applied.  Useful during for example
+ * in code called from &drm_mode_config_funcs.atomic_check operations, to
+ * validate the incoming state.
  */
 #define drm_atomic_crtc_state_for_each_plane(plane, crtc_state) \
 	drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask)
@@ -202,8 +204,9 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  * @crtc_state: the incoming crtc-state
  *
  * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
- * attached if the specified state is applied.  Useful during (for example)
- * ->atomic_check() operations, to validate the incoming state.
+ * attached if the specified state is applied.  Useful during for example
+ * in code called from &drm_mode_config_funcs.atomic_check operations, to
+ * validate the incoming state.
  *
  * Compared to just drm_atomic_crtc_state_for_each_plane() this also fills in a
  * const plane_state. This is useful when a driver just wants to peek at other
diff --git a/include/drm/drm_auth.h b/include/drm/drm_auth.h
index eecbc2f43f55..1eb4a52cad8d 100644
--- a/include/drm/drm_auth.h
+++ b/include/drm/drm_auth.h
@@ -43,18 +43,18 @@ struct drm_master {
 	struct kref refcount;
 	struct drm_device *dev;
 	/**
-	 * @unique: Unique identifier: e.g. busid. Protected by struct
-	 * &drm_device master_mutex.
+	 * @unique: Unique identifier: e.g. busid. Protected by
+	 * &drm_device.master_mutex.
 	 */
 	char *unique;
 	/**
-	 * @unique_len: Length of unique field. Protected by &struct drm_device
-	 * master_mutex.
+	 * @unique_len: Length of unique field. Protected by
+	 * &drm_device.master_mutex.
 	 */
 	int unique_len;
 	/**
-	 * @magic_map: Map of used authentication tokens. Protected by struct
-	 * &drm_device master_mutex.
+	 * @magic_map: Map of used authentication tokens. Protected by
+	 * &drm_device.master_mutex.
 	 */
 	struct idr magic_map;
 	struct drm_lock_data lock;
diff --git a/include/drm/drm_color_mgmt.h b/include/drm/drm_color_mgmt.h
index c767238ac9d5..d9c2f680f5ae 100644
--- a/include/drm/drm_color_mgmt.h
+++ b/include/drm/drm_color_mgmt.h
@@ -34,7 +34,7 @@ int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
 				 int gamma_size);
 
 /**
- * drm_color_lut_extract - clamp&round LUT entries
+ * drm_color_lut_extract - clamp and round LUT entries
  * @user_input: input value
  * @bit_precision: number of bits the hw LUT supports
  *
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index d489cc003b7e..e5e1eddd19fb 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -331,15 +331,15 @@ struct drm_connector_funcs {
 	 *
 	 * Entry point for output detection and basic mode validation. The
 	 * driver should reprobe the output if needed (e.g. when hotplug
-	 * handling is unreliable), add all detected modes to connector->modes
+	 * handling is unreliable), add all detected modes to &drm_connector.modes
 	 * and filter out any the device can't support in any configuration. It
 	 * also needs to filter out any modes wider or higher than the
 	 * parameters max_width and max_height indicate.
 	 *
 	 * The drivers must also prune any modes no longer valid from
-	 * connector->modes. Furthermore it must update connector->status and
-	 * connector->edid.  If no EDID has been received for this output
-	 * connector->edid must be NULL.
+	 * &drm_connector.modes. Furthermore it must update
+	 * &drm_connector.status and &drm_connector.edid.  If no EDID has been
+	 * received for this output connector->edid must be NULL.
 	 *
 	 * Drivers using the probe helpers should use
 	 * drm_helper_probe_single_connector_modes() or
@@ -348,7 +348,7 @@ struct drm_connector_funcs {
 	 *
 	 * RETURNS:
 	 *
-	 * The number of modes detected and filled into connector->modes.
+	 * The number of modes detected and filled into &drm_connector.modes.
 	 */
 	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
 
@@ -381,7 +381,7 @@ struct drm_connector_funcs {
 	 * core drm connector interfaces. Everything added from this callback
 	 * should be unregistered in the early_unregister callback.
 	 *
-	 * This is called while holding drm_connector->mutex.
+	 * This is called while holding &drm_connector.mutex.
 	 *
 	 * Returns:
 	 *
@@ -398,7 +398,7 @@ struct drm_connector_funcs {
 	 * early in the driver unload sequence to disable userspace access
 	 * before data structures are torndown.
 	 *
-	 * This is called while holding drm_connector->mutex.
+	 * This is called while holding &drm_connector.mutex.
 	 */
 	void (*early_unregister)(struct drm_connector *connector);
 
@@ -418,9 +418,9 @@ struct drm_connector_funcs {
 	 * Duplicate the current atomic state for this connector and return it.
 	 * The core and helpers guarantee that any atomic state duplicated with
 	 * this hook and still owned by the caller (i.e. not transferred to the
-	 * driver by calling ->atomic_commit() from struct
-	 * &drm_mode_config_funcs) will be cleaned up by calling the
-	 * @atomic_destroy_state hook in this structure.
+	 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
+	 * cleaned up by calling the @atomic_destroy_state hook in this
+	 * structure.
 	 *
 	 * Atomic drivers which don't subclass &struct drm_connector_state should use
 	 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
@@ -428,7 +428,7 @@ struct drm_connector_funcs {
 	 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
 	 * duplicated in a consistent fashion across drivers.
 	 *
-	 * It is an error to call this hook before connector->state has been
+	 * It is an error to call this hook before &drm_connector.state has been
 	 * initialized correctly.
 	 *
 	 * NOTE:
@@ -609,8 +609,8 @@ struct drm_connector {
 
 	/**
 	 * @mutex: Lock for general connector state, but currently only protects
-	 * @registered. Most of the connector state is still protected by the
-	 * mutex in &drm_mode_config.
+	 * @registered. Most of the connector state is still protected by
+	 * &drm_mode_config.mutex.
 	 */
 	struct mutex mutex;
 
@@ -636,22 +636,22 @@ struct drm_connector {
 	/**
 	 * @modes:
 	 * Modes available on this connector (from fill_modes() + user).
-	 * Protected by dev->mode_config.mutex.
+	 * Protected by &drm_mode_config.mutex.
 	 */
-	struct list_head modes; /* list of modes on this connector */
+	struct list_head modes;
 
 	/**
 	 * @status:
 	 * One of the drm_connector_status enums (connected, not, or unknown).
-	 * Protected by dev->mode_config.mutex.
+	 * Protected by &drm_mode_config.mutex.
 	 */
 	enum drm_connector_status status;
 
 	/**
 	 * @probed_modes:
 	 * These are modes added by probing with DDC or the BIOS, before
-	 * filtering is applied. Used by the probe helpers.Protected by
-	 * dev->mode_config.mutex.
+	 * filtering is applied. Used by the probe helpers. Protected by
+	 * &drm_mode_config.mutex.
 	 */
 	struct list_head probed_modes;
 
@@ -659,10 +659,10 @@ struct drm_connector {
 	 * @display_info: Display information is filled from EDID information
 	 * when a display is detected. For non hot-pluggable displays such as
 	 * flat panels in embedded systems, the driver should initialize the
-	 * display_info.width_mm and display_info.height_mm fields with the
-	 * physical size of the display.
+	 * &drm_display_info.width_mm and &drm_display_info.height_mm fields
+	 * with the physical size of the display.
 	 *
-	 * Protected by dev->mode_config.mutex.
+	 * Protected by &drm_mode_config.mutex.
 	 */
 	struct drm_display_info display_info;
 	const struct drm_connector_funcs *funcs;
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 06c943d1e04c..8f0b195e4a59 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -81,8 +81,8 @@ struct drm_plane_helper_funcs;
  * @enable: whether the CRTC should be enabled, gates all other state
  * @active: whether the CRTC is actively displaying (used for DPMS)
  * @planes_changed: planes on this crtc are updated
- * @mode_changed: crtc_state->mode or crtc_state->enable has been changed
- * @active_changed: crtc_state->active has been toggled.
+ * @mode_changed: @mode or @enable has been changed
+ * @active_changed: @active has been toggled.
  * @connectors_changed: connectors to this crtc have been updated
  * @zpos_changed: zpos values of planes on this crtc have been updated
  * @color_mgmt_changed: color management properties have changed (degamma or
@@ -102,9 +102,10 @@ struct drm_plane_helper_funcs;
  *
  * Note that the distinction between @enable and @active is rather subtile:
  * Flipping @active while @enable is set without changing anything else may
- * never return in a failure from the ->atomic_check callback. Userspace assumes
- * that a DPMS On will always succeed. In other words: @enable controls resource
- * assignment, @active controls the actual hardware state.
+ * never return in a failure from the &drm_mode_config_funcs.atomic_check
+ * callback. Userspace assumes that a DPMS On will always succeed. In other
+ * words: @enable controls resource assignment, @active controls the actual
+ * hardware state.
  *
  * The three booleans active_changed, connectors_changed and mode_changed are
  * intended to indicate whether a full modeset is needed, rather than strictly
@@ -346,8 +347,8 @@ struct drm_crtc_funcs {
 	 * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application
 	 * requests a page flip the DRM core verifies that the new frame buffer
 	 * is large enough to be scanned out by the CRTC in the currently
-	 * configured mode and then calls the CRTC ->page_flip() operation with a
-	 * pointer to the new frame buffer.
+	 * configured mode and then calls this hook with a pointer to the new
+	 * frame buffer.
 	 *
 	 * The driver must wait for any pending rendering to the new framebuffer
 	 * to complete before executing the flip. It should also wait for any
@@ -382,7 +383,7 @@ struct drm_crtc_funcs {
 	 * RETURNS:
 	 *
 	 * 0 on success or a negative error code on failure. Note that if a
-	 * ->page_flip() operation is already pending the callback should return
+	 * page flip operation is already pending the callback should return
 	 * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode
 	 * or just runtime disabled through DPMS respectively the new atomic
 	 * "ACTIVE" state) should result in an -EINVAL error code. Note that
@@ -434,19 +435,19 @@ struct drm_crtc_funcs {
 	 * @atomic_duplicate_state:
 	 *
 	 * Duplicate the current atomic state for this CRTC and return it.
-	 * The core and helpers gurantee that any atomic state duplicated with
+	 * The core and helpers guarantee that any atomic state duplicated with
 	 * this hook and still owned by the caller (i.e. not transferred to the
-	 * driver by calling ->atomic_commit() from struct
-	 * &drm_mode_config_funcs) will be cleaned up by calling the
-	 * @atomic_destroy_state hook in this structure.
+	 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
+	 * cleaned up by calling the @atomic_destroy_state hook in this
+	 * structure.
 	 *
-	 * Atomic drivers which don't subclass &struct drm_crtc should use
+	 * Atomic drivers which don't subclass &struct drm_crtc_state should use
 	 * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the
 	 * state structure to extend it with driver-private state should use
 	 * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is
 	 * duplicated in a consistent fashion across drivers.
 	 *
-	 * It is an error to call this hook before crtc->state has been
+	 * It is an error to call this hook before &drm_crtc.state has been
 	 * initialized correctly.
 	 *
 	 * NOTE:
@@ -559,7 +560,7 @@ struct drm_crtc_funcs {
 	 *
 	 * This optional hook should be used to unregister the additional
 	 * userspace interfaces attached to the crtc from
-	 * late_unregister(). It is called from drm_dev_unregister(),
+	 * @late_register. It is called from drm_dev_unregister(),
 	 * early in the driver unload sequence to disable userspace access
 	 * before data structures are torndown.
 	 */
@@ -640,8 +641,8 @@ struct drm_crtc {
 	 *
 	 * This provides a read lock for the overall crtc state (mode, dpms
 	 * state, ...) and a write lock for everything which can be update
-	 * without a full modeset (fb, cursor data, crtc properties ...). Full
-	 * modeset also need to grab dev->mode_config.connection_mutex.
+	 * without a full modeset (fb, cursor data, crtc properties ...). A full
+	 * modeset also need to grab &drm_mode_config.connection_mutex.
 	 */
 	struct drm_modeset_lock mutex;
 
@@ -773,10 +774,8 @@ struct drm_crtc {
  * @connectors: array of connectors to drive with this CRTC if possible
  * @num_connectors: size of @connectors array
  *
- * Represents a single crtc the connectors that it drives with what mode
- * and from which framebuffer it scans out from.
- *
- * This is used to set modes.
+ * This represents a modeset configuration for the legacy SETCRTC ioctl and is
+ * also used internally. Atomic drivers instead use &drm_atomic_state.
  */
 struct drm_mode_set {
 	struct drm_framebuffer *fb;
@@ -825,15 +824,21 @@ static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc)
 	return 1 << drm_crtc_index(crtc);
 }
 
-void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
-			    int *hdisplay, int *vdisplay);
 int drm_crtc_force_disable(struct drm_crtc *crtc);
 int drm_crtc_force_disable_all(struct drm_device *dev);
 
 int drm_mode_set_config_internal(struct drm_mode_set *set);
 struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx);
 
-/* Helpers */
+/**
+ * drm_crtc_find - look up a CRTC object from its ID
+ * @dev: DRM device
+ * @id: &drm_mode_object ID
+ *
+ * This can be used to look up a CRTC from its userspace ID. Only used by
+ * drivers for legacy IOCTLs and interface, nowadays extensions to the KMS
+ * userspace interface should be done using &drm_property.
+ */
 static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
 	uint32_t id)
 {
@@ -842,6 +847,13 @@ static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
 	return mo ? obj_to_crtc(mo) : NULL;
 }
 
+/**
+ * drm_for_each_crtc - iterate over all CRTCs
+ * @crtc: a &struct drm_crtc as the loop cursor
+ * @dev: the &struct drm_device
+ *
+ * Iterate over all CRTCs of @dev.
+ */
 #define drm_for_each_crtc(crtc, dev) \
 	list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
 
diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index 003207670597..f4b4d154b98e 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -414,7 +414,7 @@ struct drm_dp_mst_topology_mgr {
 	/**
 	 * @dev: device pointer for adding i2c devices etc.
 	 */
-	struct device *dev;
+	struct drm_device *dev;
 	/**
 	 * @cbs: callbacks for connector addition and destruction.
 	 */
@@ -493,8 +493,8 @@ struct drm_dp_mst_topology_mgr {
 	int total_pbn;
 
 	/**
-	 * @qlock: protects @tx_msg_downq, the tx_slots in struct
-	 * &drm_dp_mst_branch and txmsg->state once they are queued
+	 * @qlock: protects @tx_msg_downq, the &drm_dp_mst_branch.txslost and
+	 * &drm_dp_sideband_msg_tx.state once they are queued
 	 */
 	struct mutex qlock;
 	/**
@@ -508,8 +508,7 @@ struct drm_dp_mst_topology_mgr {
 	struct mutex payload_lock;
 	/**
 	 * @proposed_vcpis: Array of pointers for the new VCPI allocation. The
-	 * VCPI structure itself is embedded into the corresponding
-	 * &drm_dp_mst_port structure.
+	 * VCPI structure itself is &drm_dp_mst_port.vcpi.
 	 */
 	struct drm_dp_vcpi **proposed_vcpis;
 	/**
@@ -556,7 +555,10 @@ struct drm_dp_mst_topology_mgr {
 	struct work_struct destroy_connector_work;
 };
 
-int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr, struct device *dev, struct drm_dp_aux *aux, int max_dpcd_transaction_bytes, int max_payloads, int conn_base_id);
+int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr,
+				 struct drm_device *dev, struct drm_dp_aux *aux,
+				 int max_dpcd_transaction_bytes,
+				 int max_payloads, int conn_base_id);
 
 void drm_dp_mst_topology_mgr_destroy(struct drm_dp_mst_topology_mgr *mgr);
 
diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h
index 34ece393c639..732e85652d1e 100644
--- a/include/drm/drm_drv.h
+++ b/include/drm/drm_drv.h
@@ -81,7 +81,6 @@ struct drm_driver {
 	 * Zero on success, non-zero value on failure.
 	 */
 	int (*load) (struct drm_device *, unsigned long flags);
-	int (*firstopen) (struct drm_device *);
 	int (*open) (struct drm_device *, struct drm_file *);
 	void (*preclose) (struct drm_device *, struct drm_file *file_priv);
 	void (*postclose) (struct drm_device *, struct drm_file *);
@@ -103,9 +102,6 @@ struct drm_driver {
 	 *
 	 */
 	void (*unload) (struct drm_device *);
-	int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv);
-	int (*dma_quiescent) (struct drm_device *);
-	int (*context_dtor) (struct drm_device *dev, int context);
 	int (*set_busid)(struct drm_device *dev, struct drm_master *master);
 
 	/**
@@ -151,20 +147,6 @@ struct drm_driver {
 	void (*disable_vblank) (struct drm_device *dev, unsigned int pipe);
 
 	/**
-	 * @device_is_agp:
-	 *
-	 * Called by drm_device_is_agp().  Typically used to determine if a card
-	 * is really attached to AGP or not.
-	 *
-	 * Returns:
-	 *
-	 * One of three values is returned depending on whether or not the
-	 * card is absolutely not AGP (return of 0), absolutely is AGP
-	 * (return of 1), or may or may not be AGP (return of 2).
-	 */
-	int (*device_is_agp) (struct drm_device *dev);
-
-	/**
 	 * @get_scanout_position:
 	 *
 	 * Called by vblank timestamping code.
@@ -314,7 +296,7 @@ struct drm_driver {
 	/**
 	 * @gem_free_object_unlocked: deconstructor for drm_gem_objects
 	 *
-	 * This is for drivers which are not encumbered with dev->struct_mutex
+	 * This is for drivers which are not encumbered with &drm_device.struct_mutex
 	 * legacy locking schemes. Use this hook instead of @gem_free_object.
 	 */
 	void (*gem_free_object_unlocked) (struct drm_gem_object *obj);
@@ -359,9 +341,6 @@ struct drm_driver {
 	int (*gem_prime_mmap)(struct drm_gem_object *obj,
 				struct vm_area_struct *vma);
 
-	/* vga arb irq handler */
-	void (*vgaarb_irq)(struct drm_device *dev, bool state);
-
 	/**
 	 * @dumb_create:
 	 *
@@ -430,13 +409,20 @@ struct drm_driver {
 	char *date;
 
 	u32 driver_features;
-	int dev_priv_size;
 	const struct drm_ioctl_desc *ioctls;
 	int num_ioctls;
 	const struct file_operations *fops;
 
+	/* Everything below here is for legacy driver, never use! */
+	/* private: */
+
 	/* List of devices hanging off this driver with stealth attach. */
 	struct list_head legacy_dev_list;
+	int (*firstopen) (struct drm_device *);
+	int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv);
+	int (*dma_quiescent) (struct drm_device *);
+	int (*context_dtor) (struct drm_device *dev, int context);
+	int dev_priv_size;
 };
 
 extern __printf(6, 7)
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index 38eabf65f19d..43fb0ac5eb9c 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -24,6 +24,7 @@
 #define __DRM_EDID_H__
 
 #include <linux/types.h>
+#include <linux/hdmi.h>
 
 struct drm_device;
 struct i2c_adapter;
@@ -322,8 +323,6 @@ struct cea_sad {
 struct drm_encoder;
 struct drm_connector;
 struct drm_display_mode;
-struct hdmi_avi_infoframe;
-struct hdmi_vendor_infoframe;
 
 void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid);
 int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads);
@@ -346,6 +345,11 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
 int
 drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
 					    const struct drm_display_mode *mode);
+void
+drm_hdmi_avi_infoframe_quant_range(struct hdmi_avi_infoframe *frame,
+				   const struct drm_display_mode *mode,
+				   enum hdmi_quantization_range rgb_quant_range,
+				   bool rgb_quant_range_selectable);
 
 /**
  * drm_eld_mnl - Get ELD monitor name length in bytes.
@@ -442,6 +446,8 @@ enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code);
 bool drm_detect_hdmi_monitor(struct edid *edid);
 bool drm_detect_monitor_audio(struct edid *edid);
 bool drm_rgb_quant_range_selectable(struct edid *edid);
+enum hdmi_quantization_range
+drm_default_rgb_quant_range(const struct drm_display_mode *mode);
 int drm_add_modes_noedid(struct drm_connector *connector,
 			 int hdisplay, int vdisplay);
 void drm_set_preferred_mode(struct drm_connector *connector,
diff --git a/include/drm/drm_encoder.h b/include/drm/drm_encoder.h
index 5f58f65344e0..8d8245ec0181 100644
--- a/include/drm/drm_encoder.h
+++ b/include/drm/drm_encoder.h
@@ -75,7 +75,7 @@ struct drm_encoder_funcs {
 	 *
 	 * This optional hook should be used to unregister the additional
 	 * userspace interfaces attached to the encoder from
-	 * late_unregister(). It is called from drm_dev_unregister(),
+	 * @late_register. It is called from drm_dev_unregister(),
 	 * early in the driver unload sequence to disable userspace access
 	 * before data structures are torndown.
 	 */
diff --git a/include/drm/drm_fb_cma_helper.h b/include/drm/drm_fb_cma_helper.h
index 9f4e34ea99fd..8dd6e5585e51 100644
--- a/include/drm/drm_fb_cma_helper.h
+++ b/include/drm/drm_fb_cma_helper.h
@@ -26,6 +26,8 @@ void drm_fbdev_cma_fini(struct drm_fbdev_cma *fbdev_cma);
 void drm_fbdev_cma_restore_mode(struct drm_fbdev_cma *fbdev_cma);
 void drm_fbdev_cma_hotplug_event(struct drm_fbdev_cma *fbdev_cma);
 void drm_fbdev_cma_set_suspend(struct drm_fbdev_cma *fbdev_cma, int state);
+void drm_fbdev_cma_set_suspend_unlocked(struct drm_fbdev_cma *fbdev_cma,
+					int state);
 
 void drm_fb_cma_destroy(struct drm_framebuffer *fb);
 int drm_fb_cma_create_handle(struct drm_framebuffer *fb,
diff --git a/include/drm/drm_flip_work.h b/include/drm/drm_flip_work.h
index d387cf06ae05..21c3d512d25c 100644
--- a/include/drm/drm_flip_work.h
+++ b/include/drm/drm_flip_work.h
@@ -54,7 +54,7 @@ typedef void (*drm_flip_func_t)(struct drm_flip_work *work, void *val);
 /**
  * struct drm_flip_task - flip work task
  * @node: list entry element
- * @data: data to pass to work->func
+ * @data: data to pass to &drm_flip_work.func
  */
 struct drm_flip_task {
 	struct list_head node;
diff --git a/include/drm/drm_framebuffer.h b/include/drm/drm_framebuffer.h
index 046c35e54099..04c77eee9c20 100644
--- a/include/drm/drm_framebuffer.h
+++ b/include/drm/drm_framebuffer.h
@@ -40,8 +40,8 @@ struct drm_framebuffer_funcs {
 	 *
 	 * Clean up framebuffer resources, specifically also unreference the
 	 * backing storage. The core guarantees to call this function for every
-	 * framebuffer successfully created by ->fb_create() in
-	 * &drm_mode_config_funcs. Drivers must also call
+	 * framebuffer successfully created by calling
+	 * &drm_mode_config_funcs.fb_create. Drivers must also call
 	 * drm_framebuffer_cleanup() to release DRM core resources for this
 	 * framebuffer.
 	 */
@@ -112,8 +112,8 @@ struct drm_framebuffer {
 	 */
 	struct drm_device *dev;
 	/**
-	 * @head: Place on the dev->mode_config.fb_list, access protected by
-	 * dev->mode_config.fb_lock.
+	 * @head: Place on the &drm_mode_config.fb_list, access protected by
+	 * &drm_mode_config.fb_lock.
 	 */
 	struct list_head head;
 
@@ -187,8 +187,7 @@ struct drm_framebuffer {
 	 */
 	int hot_y;
 	/**
-	 * @filp_head: Placed on &struct drm_file fbs list_head, protected by
-	 * fbs_lock in the same structure.
+	 * @filp_head: Placed on &drm_file.fbs, protected by &drm_file.fbs_lock.
 	 */
 	struct list_head filp_head;
 };
@@ -260,8 +259,8 @@ static inline void drm_framebuffer_assign(struct drm_framebuffer **p,
  * @fb: the loop cursor
  * @dev: the DRM device
  *
- * Iterate over all framebuffers of @dev. User must hold the fb_lock from
- * &drm_mode_config.
+ * Iterate over all framebuffers of @dev. User must hold
+ * &drm_mode_config.fb_lock.
  */
 #define drm_for_each_fb(fb, dev) \
 	for (WARN_ON(!mutex_is_locked(&(dev)->mode_config.fb_lock)),		\
diff --git a/include/drm/drm_gem.h b/include/drm/drm_gem.h
index 9f63736e6163..449a41b56ffc 100644
--- a/include/drm/drm_gem.h
+++ b/include/drm/drm_gem.h
@@ -63,7 +63,7 @@ struct drm_gem_object {
 	 * drops to 0 any global names (e.g. the id in the flink namespace) will
 	 * be cleared.
 	 *
-	 * Protected by dev->object_name_lock.
+	 * Protected by &drm_device.object_name_lock.
 	 */
 	unsigned handle_count;
 
@@ -106,8 +106,8 @@ struct drm_gem_object {
 	 * @name:
 	 *
 	 * Global name for this object, starts at 1. 0 means unnamed.
-	 * Access is covered by dev->object_name_lock. This is used by the GEM_FLINK
-	 * and GEM_OPEN ioctls.
+	 * Access is covered by &drm_device.object_name_lock. This is used by
+	 * the GEM_FLINK and GEM_OPEN ioctls.
 	 */
 	int name;
 
@@ -150,7 +150,7 @@ struct drm_gem_object {
 	 * through importing or exporting). We break the resulting reference
 	 * loop when the last gem handle for this object is released.
 	 *
-	 * Protected by obj->object_name_lock.
+	 * Protected by &drm_device.object_name_lock.
 	 */
 	struct dma_buf *dma_buf;
 
@@ -163,7 +163,7 @@ struct drm_gem_object {
 	 * attachment point for the device. This is invariant over the lifetime
 	 * of a gem object.
 	 *
-	 * The driver's ->gem_free_object callback is responsible for cleaning
+	 * The &drm_driver.gem_free_object callback is responsible for cleaning
 	 * up the dma_buf attachment and references acquired at import time.
 	 *
 	 * Note that the drm gem/prime core does not depend upon drivers setting
@@ -204,7 +204,7 @@ drm_gem_object_reference(struct drm_gem_object *obj)
  * @obj: GEM buffer object
  *
  * This function is meant to be used by drivers which are not encumbered with
- * dev->struct_mutex legacy locking and which are using the
+ * &drm_device.struct_mutex legacy locking and which are using the
  * gem_free_object_unlocked callback. It avoids all the locking checks and
  * locking overhead of drm_gem_object_unreference() and
  * drm_gem_object_unreference_unlocked().
@@ -212,8 +212,8 @@ drm_gem_object_reference(struct drm_gem_object *obj)
  * Drivers should never call this directly in their code. Instead they should
  * wrap it up into a ``driver_gem_object_unreference(struct driver_gem_object
  * *obj)`` wrapper function, and use that. Shared code should never call this, to
- * avoid breaking drivers by accident which still depend upon dev->struct_mutex
- * locking.
+ * avoid breaking drivers by accident which still depend upon
+ * &drm_device.struct_mutex locking.
  */
 static inline void
 __drm_gem_object_unreference(struct drm_gem_object *obj)
diff --git a/include/drm/drm_irq.h b/include/drm/drm_irq.h
index 18cfd11307e1..2fb880462a57 100644
--- a/include/drm/drm_irq.h
+++ b/include/drm/drm_irq.h
@@ -67,7 +67,7 @@ struct drm_vblank_crtc {
 	 * @disable_timer: Disable timer for the delayed vblank disabling
 	 * hysteresis logic. Vblank disabling is controlled through the
 	 * drm_vblank_offdelay module option and the setting of the
-	 * max_vblank_count value in the &drm_device structure.
+	 * &drm_device.max_vblank_count value.
 	 */
 	struct timer_list disable_timer;
 
@@ -92,7 +92,7 @@ struct drm_vblank_crtc {
 	 */
 	atomic_t refcount;		/* number of users of vblank interruptsper crtc */
 	/**
-	 * @last: Protected by dev->vbl_lock, used for wraparound handling.
+	 * @last: Protected by &drm_device.vbl_lock, used for wraparound handling.
 	 */
 	u32 last;
 	/**
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 17942c0f32a8..5a29978062d3 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -132,8 +132,8 @@ struct drm_mode_config_funcs {
 	 *    that before calling this hook.
 	 *
 	 * See the documentation of @atomic_commit for an exhaustive list of
-	 * error conditions which don't have to be checked at the
-	 * ->atomic_check() stage?
+	 * error conditions which don't have to be checked at the in this
+	 * callback.
 	 *
 	 * See the documentation for &struct drm_atomic_state for how exactly
 	 * an atomic modeset update is described.
@@ -198,10 +198,10 @@ struct drm_mode_config_funcs {
 	 * completed. These events are per-CRTC and can be distinguished by the
 	 * CRTC index supplied in &drm_event to userspace.
 	 *
-	 * The drm core will supply a &struct drm_event in the event
-	 * member of each CRTC's &drm_crtc_state structure. See the
-	 * documentation for &drm_crtc_state for more details about the precise
-	 * semantics of this event.
+	 * The drm core will supply a &struct drm_event in each CRTC's
+	 * &drm_crtc_state.event. See the documentation for
+	 * &drm_crtc_state.event for more details about the precise semantics of
+	 * this event.
 	 *
 	 * NOTE:
 	 *
diff --git a/include/drm/drm_mode_object.h b/include/drm/drm_mode_object.h
index 43460b21d112..2c017adf6d74 100644
--- a/include/drm/drm_mode_object.h
+++ b/include/drm/drm_mode_object.h
@@ -86,10 +86,15 @@ struct drm_object_properties {
 	 *
 	 * Note that atomic drivers do not store mutable properties in this
 	 * array, but only the decoded values in the corresponding state
-	 * structure. The decoding is done using the ->atomic_get_property and
-	 * ->atomic_set_property hooks of the corresponding object. Hence atomic
-	 * drivers should not use drm_object_property_set_value() and
-	 * drm_object_property_get_value() on mutable objects, i.e. those
+	 * structure. The decoding is done using the &drm_crtc.atomic_get_property and
+	 * &drm_crtc.atomic_set_property hooks for &struct drm_crtc. For
+	 * &struct drm_plane the hooks are &drm_plane_funcs.atomic_get_property and
+	 * &drm_plane_funcs.atomic_set_property. And for &struct drm_connector
+	 * the hooks are &drm_connector_funcs.atomic_get_property and
+	 * &drm_connector_funcs.atomic_set_property .
+	 *
+	 * Hence atomic drivers should not use drm_object_property_set_value()
+	 * and drm_object_property_get_value() on mutable objects, i.e. those
 	 * without the DRM_MODE_PROP_IMMUTABLE flag set.
 	 */
 	uint64_t values[DRM_OBJECT_MAX_PROPERTY];
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index 9934d91619c1..6dd34280e892 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -459,6 +459,8 @@ int of_get_drm_display_mode(struct device_node *np,
 void drm_mode_set_name(struct drm_display_mode *mode);
 int drm_mode_hsync(const struct drm_display_mode *mode);
 int drm_mode_vrefresh(const struct drm_display_mode *mode);
+void drm_mode_get_hv_timing(const struct drm_display_mode *mode,
+			    int *hdisplay, int *vdisplay);
 
 void drm_mode_set_crtcinfo(struct drm_display_mode *p,
 			   int adjust_flags);
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index 46f5b349f059..091c42205667 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -111,9 +111,9 @@ struct drm_crtc_helper_funcs {
 	 * This callback is used to validate a mode. The parameter mode is the
 	 * display mode that userspace requested, adjusted_mode is the mode the
 	 * encoders need to be fed with. Note that this is the inverse semantics
-	 * of the meaning for the &drm_encoder and &drm_bridge
-	 * ->mode_fixup() functions. If the CRTC cannot support the requested
-	 * conversion from mode to adjusted_mode it should reject the modeset.
+	 * of the meaning for the &drm_encoder and &drm_bridge_funcs.mode_fixup
+	 * vfunc. If the CRTC cannot support the requested conversion from mode
+	 * to adjusted_mode it should reject the modeset.
 	 *
 	 * This function is used by both legacy CRTC helpers and atomic helpers.
 	 * With atomic helpers it is optional.
@@ -134,17 +134,18 @@ struct drm_crtc_helper_funcs {
 	 *
 	 * Also beware that neither core nor helpers filter modes before
 	 * passing them to the driver: While the list of modes that is
-	 * advertised to userspace is filtered using the connector's
-	 * ->mode_valid() callback, neither the core nor the helpers do any
-	 * filtering on modes passed in from userspace when setting a mode. It
-	 * is therefore possible for userspace to pass in a mode that was
-	 * previously filtered out using ->mode_valid() or add a custom mode
-	 * that wasn't probed from EDID or similar to begin with.  Even though
-	 * this is an advanced feature and rarely used nowadays, some users rely
-	 * on being able to specify modes manually so drivers must be prepared
-	 * to deal with it. Specifically this means that all drivers need not
-	 * only validate modes in ->mode_valid() but also in ->mode_fixup() to
-	 * make sure invalid modes passed in from userspace are rejected.
+	 * advertised to userspace is filtered using the
+	 * &drm_connector.mode_valid callback, neither the core nor the helpers
+	 * do any filtering on modes passed in from userspace when setting a
+	 * mode. It is therefore possible for userspace to pass in a mode that
+	 * was previously filtered out using &drm_connector.mode_valid or add a
+	 * custom mode that wasn't probed from EDID or similar to begin with.
+	 * Even though this is an advanced feature and rarely used nowadays,
+	 * some users rely on being able to specify modes manually so drivers
+	 * must be prepared to deal with it. Specifically this means that all
+	 * drivers need not only validate modes in &drm_connector.mode_valid but
+	 * also in this or in the &drm_encoder_helper_funcs.mode_fixup callback
+	 * to make sure invalid modes passed in from userspace are rejected.
 	 *
 	 * RETURNS:
 	 *
@@ -205,7 +206,7 @@ struct drm_crtc_helper_funcs {
 	 * optimized fast-path instead of a full mode set operation with all the
 	 * resulting flickering. If it is not present
 	 * drm_crtc_helper_set_config() will fall back to a full modeset, using
-	 * the ->mode_set() callback. Since it can't update other planes it's
+	 * the @mode_set callback. Since it can't update other planes it's
 	 * incompatible with atomic modeset support.
 	 *
 	 * This callback is only used by the CRTC helpers and deprecated.
@@ -238,8 +239,7 @@ struct drm_crtc_helper_funcs {
 	/**
 	 * @load_lut:
 	 *
-	 * Load a LUT prepared with the @gamma_set functions from
-	 * &drm_fb_helper_funcs.
+	 * Load a LUT prepared with the &drm_fb_helper_funcs.gamma_set vfunc.
 	 *
 	 * This callback is optional and is only used by the fbdev emulation
 	 * helpers.
@@ -257,10 +257,11 @@ struct drm_crtc_helper_funcs {
 	 *
 	 * This callback should be used to disable the CRTC. With the atomic
 	 * drivers it is called after all encoders connected to this CRTC have
-	 * been shut off already using their own ->disable hook. If that
-	 * sequence is too simple drivers can just add their own hooks and call
-	 * it from this CRTC callback here by looping over all encoders
-	 * connected to it using for_each_encoder_on_crtc().
+	 * been shut off already using their own
+	 * &drm_encoder_helper_funcs.disable hook. If that sequence is too
+	 * simple drivers can just add their own hooks and call it from this
+	 * CRTC callback here by looping over all encoders connected to it using
+	 * for_each_encoder_on_crtc().
 	 *
 	 * This hook is used both by legacy CRTC helpers and atomic helpers.
 	 * Atomic drivers don't need to implement it if there's no need to
@@ -289,10 +290,10 @@ struct drm_crtc_helper_funcs {
 	 *
 	 * This callback should be used to enable the CRTC. With the atomic
 	 * drivers it is called before all encoders connected to this CRTC are
-	 * enabled through the encoder's own ->enable hook.  If that sequence is
-	 * too simple drivers can just add their own hooks and call it from this
-	 * CRTC callback here by looping over all encoders connected to it using
-	 * for_each_encoder_on_crtc().
+	 * enabled through the encoder's own &drm_encoder_helper_funcs.enable
+	 * hook.  If that sequence is too simple drivers can just add their own
+	 * hooks and call it from this CRTC callback here by looping over all
+	 * encoders connected to it using for_each_encoder_on_crtc().
 	 *
 	 * This hook is used only by atomic helpers, for symmetry with @disable.
 	 * Atomic drivers don't need to implement it if there's no need to
@@ -316,16 +317,16 @@ struct drm_crtc_helper_funcs {
 	 * beforehand. This is calling order used by the default helper
 	 * implementation in drm_atomic_helper_check().
 	 *
-	 * When using drm_atomic_helper_check_planes() CRTCs' ->atomic_check()
-	 * hooks are called after the ones for planes, which allows drivers to
-	 * assign shared resources requested by planes in the CRTC callback
-	 * here. For more complicated dependencies the driver can call the provided
-	 * check helpers multiple times until the computed state has a final
-	 * configuration and everything has been checked.
+	 * When using drm_atomic_helper_check_planes() this hook is called
+	 * after the &drm_plane_helper_funcs.atomc_check hook for planes, which
+	 * allows drivers to assign shared resources requested by planes in this
+	 * callback here. For more complicated dependencies the driver can call
+	 * the provided check helpers multiple times until the computed state
+	 * has a final configuration and everything has been checked.
 	 *
 	 * This function is also allowed to inspect any other object's state and
 	 * can add more state objects to the atomic commit if needed. Care must
-	 * be taken though to ensure that state check&compute functions for
+	 * be taken though to ensure that state check and compute functions for
 	 * these added states are all called, and derived state in other objects
 	 * all updated. Again the recommendation is to just call check helpers
 	 * until a maximal configuration is reached.
@@ -400,10 +401,11 @@ struct drm_crtc_helper_funcs {
 	 *
 	 * This callback should be used to disable the CRTC. With the atomic
 	 * drivers it is called after all encoders connected to this CRTC have
-	 * been shut off already using their own ->disable hook. If that
-	 * sequence is too simple drivers can just add their own hooks and call
-	 * it from this CRTC callback here by looping over all encoders
-	 * connected to it using for_each_encoder_on_crtc().
+	 * been shut off already using their own
+	 * &drm_encoder_helper_funcs.disable hook. If that sequence is too
+	 * simple drivers can just add their own hooks and call it from this
+	 * CRTC callback here by looping over all encoders connected to it using
+	 * for_each_encoder_on_crtc().
 	 *
 	 * This hook is used only by atomic helpers. Atomic drivers don't
 	 * need to implement it if there's no need to disable anything at the
@@ -483,16 +485,18 @@ struct drm_encoder_helper_funcs {
 	 * Also beware that neither core nor helpers filter modes before
 	 * passing them to the driver: While the list of modes that is
 	 * advertised to userspace is filtered using the connector's
-	 * ->mode_valid() callback, neither the core nor the helpers do any
-	 * filtering on modes passed in from userspace when setting a mode. It
-	 * is therefore possible for userspace to pass in a mode that was
-	 * previously filtered out using ->mode_valid() or add a custom mode
-	 * that wasn't probed from EDID or similar to begin with.  Even though
-	 * this is an advanced feature and rarely used nowadays, some users rely
-	 * on being able to specify modes manually so drivers must be prepared
-	 * to deal with it. Specifically this means that all drivers need not
-	 * only validate modes in ->mode_valid() but also in ->mode_fixup() to
-	 * make sure invalid modes passed in from userspace are rejected.
+	 * &drm_connector_helper_funcs.mode_valid callback, neither the core nor
+	 * the helpers do any filtering on modes passed in from userspace when
+	 * setting a mode. It is therefore possible for userspace to pass in a
+	 * mode that was previously filtered out using
+	 * &drm_connector_helper_funcs.mode_valid or add a custom mode that
+	 * wasn't probed from EDID or similar to begin with.  Even though this
+	 * is an advanced feature and rarely used nowadays, some users rely on
+	 * being able to specify modes manually so drivers must be prepared to
+	 * deal with it. Specifically this means that all drivers need not only
+	 * validate modes in &drm_connector.mode_valid but also in this or in
+	 * the &drm_crtc_helper_funcs.mode_fixup callback to make sure
+	 * invalid modes passed in from userspace are rejected.
 	 *
 	 * RETURNS:
 	 *
@@ -544,7 +548,7 @@ struct drm_encoder_helper_funcs {
 	 * use this hook, because the helper library calls it only once and not
 	 * every time the display pipeline is suspend using either DPMS or the
 	 * new "ACTIVE" property. Such drivers should instead move all their
-	 * encoder setup into the ->enable() callback.
+	 * encoder setup into the @enable callback.
 	 *
 	 * This callback is used both by the legacy CRTC helpers and the atomic
 	 * modeset helpers. It is optional in the atomic helpers.
@@ -570,7 +574,7 @@ struct drm_encoder_helper_funcs {
 	 * use this hook, because the helper library calls it only once and not
 	 * every time the display pipeline is suspended using either DPMS or the
 	 * new "ACTIVE" property. Such drivers should instead move all their
-	 * encoder setup into the ->enable() callback.
+	 * encoder setup into the @enable callback.
 	 *
 	 * This callback is used by the atomic modeset helpers in place of the
 	 * @mode_set callback, if set by the driver. It is optional and should
@@ -621,10 +625,10 @@ struct drm_encoder_helper_funcs {
 	 *
 	 * This callback should be used to disable the encoder. With the atomic
 	 * drivers it is called before this encoder's CRTC has been shut off
-	 * using the CRTC's own ->disable hook.  If that sequence is too simple
-	 * drivers can just add their own driver private encoder hooks and call
-	 * them from CRTC's callback by looping over all encoders connected to
-	 * it using for_each_encoder_on_crtc().
+	 * using their own &drm_crtc_helper_funcs.disable hook.  If that
+	 * sequence is too simple drivers can just add their own driver private
+	 * encoder hooks and call them from CRTC's callback by looping over all
+	 * encoders connected to it using for_each_encoder_on_crtc().
 	 *
 	 * This hook is used both by legacy CRTC helpers and atomic helpers.
 	 * Atomic drivers don't need to implement it if there's no need to
@@ -651,10 +655,10 @@ struct drm_encoder_helper_funcs {
 	 *
 	 * This callback should be used to enable the encoder. With the atomic
 	 * drivers it is called after this encoder's CRTC has been enabled using
-	 * the CRTC's own ->enable hook.  If that sequence is too simple drivers
-	 * can just add their own driver private encoder hooks and call them
-	 * from CRTC's callback by looping over all encoders connected to it
-	 * using for_each_encoder_on_crtc().
+	 * their own &drm_crtc_helper_funcs.enable hook.  If that sequence is
+	 * too simple drivers can just add their own driver private encoder
+	 * hooks and call them from CRTC's callback by looping over all encoders
+	 * connected to it using for_each_encoder_on_crtc().
 	 *
 	 * This hook is used only by atomic helpers, for symmetry with @disable.
 	 * Atomic drivers don't need to implement it if there's no need to
@@ -716,7 +720,7 @@ struct drm_connector_helper_funcs {
 	 * @get_modes:
 	 *
 	 * This function should fill in all modes currently valid for the sink
-	 * into the connector->probed_modes list. It should also update the
+	 * into the &drm_connector.probed_modes list. It should also update the
 	 * EDID property by calling drm_mode_connector_update_edid_property().
 	 *
 	 * The usual way to implement this is to cache the EDID retrieved in the
@@ -725,8 +729,9 @@ struct drm_connector_helper_funcs {
 	 * them by calling drm_add_edid_modes(). But connectors that driver a
 	 * fixed panel can also manually add specific modes using
 	 * drm_mode_probed_add(). Drivers which manually add modes should also
-	 * make sure that the @display_info, @width_mm and @height_mm fields of the
-	 * &struct drm_connector are filled in.
+	 * make sure that the &drm_connector.display_info,
+	 * &drm_connector.width_mm and &drm_connector.height_mm fields are
+	 * filled in.
 	 *
 	 * Virtual drivers that just want some standard VESA mode with a given
 	 * resolution can call drm_add_modes_noedid(), and mark the preferred
@@ -735,7 +740,7 @@ struct drm_connector_helper_funcs {
 	 * Finally drivers that support audio probably want to update the ELD
 	 * data, too, using drm_edid_to_eld().
 	 *
-	 * This function is only called after the ->detect() hook has indicated
+	 * This function is only called after the @detect hook has indicated
 	 * that a sink is connected and when the EDID isn't overridden through
 	 * sysfs or the kernel commandline.
 	 *
@@ -768,8 +773,8 @@ struct drm_connector_helper_funcs {
 	 *
 	 * RETURNS:
 	 *
-	 * Either MODE_OK or one of the failure reasons in enum
-	 * &drm_mode_status.
+	 * Either &drm_mode_status.MODE_OK or one of the failure reasons in &enum
+	 * drm_mode_status.
 	 */
 	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
 					   struct drm_display_mode *mode);
@@ -875,7 +880,7 @@ struct drm_plane_helper_funcs {
 	 * RETURNS:
 	 *
 	 * 0 on success or one of the following negative error codes allowed by
-	 * the atomic_commit hook in &drm_mode_config_funcs. When using helpers
+	 * the &drm_mode_config_funcs.atomic_commit vfunc. When using helpers
 	 * this callback is the only one which can fail an atomic commit,
 	 * everything else must complete successfully.
 	 */
@@ -898,7 +903,7 @@ struct drm_plane_helper_funcs {
 	 *
 	 * Drivers should check plane specific constraints in this hook.
 	 *
-	 * When using drm_atomic_helper_check_planes() plane's ->atomic_check()
+	 * When using drm_atomic_helper_check_planes() plane's @atomic_check
 	 * hooks are called before the ones for CRTCs, which allows drivers to
 	 * request shared resources that the CRTC controls here. For more
 	 * complicated dependencies the driver can call the provided check helpers
@@ -907,7 +912,7 @@ struct drm_plane_helper_funcs {
 	 *
 	 * This function is also allowed to inspect any other object's state and
 	 * can add more state objects to the atomic commit if needed. Care must
-	 * be taken though to ensure that state check&compute functions for
+	 * be taken though to ensure that state check and compute functions for
 	 * these added states are all called, and derived state in other objects
 	 * all updated. Again the recommendation is to just call check helpers
 	 * until a maximal configuration is reached.
@@ -936,8 +941,8 @@ struct drm_plane_helper_funcs {
 	 * @atomic_update:
 	 *
 	 * Drivers should use this function to update the plane state.  This
-	 * hook is called in-between the ->atomic_begin() and
-	 * ->atomic_flush() of &drm_crtc_helper_funcs.
+	 * hook is called in-between the &drm_crtc_helper_funcs.atomic_begin and
+	 * drm_crtc_helper_funcs.atomic_flush callbacks.
 	 *
 	 * Note that the power state of the display pipe when this function is
 	 * called depends upon the exact helpers and calling sequence the driver
@@ -953,14 +958,15 @@ struct drm_plane_helper_funcs {
 	 * @atomic_disable:
 	 *
 	 * Drivers should use this function to unconditionally disable a plane.
-	 * This hook is called in-between the ->atomic_begin() and
-	 * ->atomic_flush() of &drm_crtc_helper_funcs. It is an alternative to
+	 * This hook is called in-between the
+	 * &drm_crtc_helper_funcs.atomic_begin and
+	 * drm_crtc_helper_funcs.atomic_flush callbacks. It is an alternative to
 	 * @atomic_update, which will be called for disabling planes, too, if
 	 * the @atomic_disable hook isn't implemented.
 	 *
 	 * This hook is also useful to disable planes in preparation of a modeset,
 	 * by calling drm_atomic_helper_disable_planes_on_crtc() from the
-	 * ->disable() hook in &drm_crtc_helper_funcs.
+	 * &drm_crtc_helper_funcs.disable hook.
 	 *
 	 * Note that the power state of the display pipe when this function is
 	 * called depends upon the exact helpers and calling sequence the driver
diff --git a/include/drm/drm_modeset_lock.h b/include/drm/drm_modeset_lock.h
index d918ce45ec2c..96d39fbd12ca 100644
--- a/include/drm/drm_modeset_lock.h
+++ b/include/drm/drm_modeset_lock.h
@@ -64,7 +64,7 @@ struct drm_modeset_acquire_ctx {
 /**
  * struct drm_modeset_lock - used for locking modeset resources.
  * @mutex: resource locking
- * @head: used to hold it's place on state->locked list when
+ * @head: used to hold it's place on &drm_atomi_state.locked list when
  *    part of an atomic update
  *
  * Used for locking CRTCs and other modeset resources.
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
index e049bc52fb07..20867b4371ab 100644
--- a/include/drm/drm_plane.h
+++ b/include/drm/drm_plane.h
@@ -247,11 +247,11 @@ struct drm_plane_funcs {
 	 * @atomic_duplicate_state:
 	 *
 	 * Duplicate the current atomic state for this plane and return it.
-	 * The core and helpers gurantee that any atomic state duplicated with
+	 * The core and helpers guarantee that any atomic state duplicated with
 	 * this hook and still owned by the caller (i.e. not transferred to the
-	 * driver by calling ->atomic_commit() from struct
-	 * &drm_mode_config_funcs) will be cleaned up by calling the
-	 * @atomic_destroy_state hook in this structure.
+	 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
+	 * cleaned up by calling the @atomic_destroy_state hook in this
+	 * structure.
 	 *
 	 * Atomic drivers which don't subclass &struct drm_plane_state should use
 	 * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
@@ -259,7 +259,7 @@ struct drm_plane_funcs {
 	 * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
 	 * duplicated in a consistent fashion across drivers.
 	 *
-	 * It is an error to call this hook before plane->state has been
+	 * It is an error to call this hook before &drm_plane.state has been
 	 * initialized correctly.
 	 *
 	 * NOTE:
@@ -372,7 +372,7 @@ struct drm_plane_funcs {
 	 *
 	 * This optional hook should be used to unregister the additional
 	 * userspace interfaces attached to the plane from
-	 * late_unregister(). It is called from drm_dev_unregister(),
+	 * @late_register. It is called from drm_dev_unregister(),
 	 * early in the driver unload sequence to disable userspace access
 	 * before data structures are torndown.
 	 */
@@ -423,8 +423,8 @@ enum drm_plane_type {
 	 *
 	 * Primary planes represent a "main" plane for a CRTC.  Primary planes
 	 * are the planes operated upon by CRTC modesetting and flipping
-	 * operations described in the page_flip and set_config hooks in struct
-	 * &drm_crtc_funcs.
+	 * operations described in the &drm_crtc_funcs.page_flip and
+	 * &drm_crtc_funcs.set_config hooks.
 	 */
 	DRM_PLANE_TYPE_PRIMARY,
 
@@ -470,9 +470,9 @@ struct drm_plane {
 	/**
 	 * @mutex:
 	 *
-	 * Protects modeset plane state, together with the mutex of &drm_crtc
-	 * this plane is linked to (when active, getting actived or getting
-	 * disabled).
+	 * Protects modeset plane state, together with the &drm_crtc.mutex of
+	 * CRTC this plane is linked to (when active, getting activated or
+	 * getting disabled).
 	 */
 	struct drm_modeset_lock mutex;
 
@@ -580,7 +580,7 @@ static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
  *
  * Iterate over all legacy planes of @dev, excluding primary and cursor planes.
  * This is useful for implementing userspace apis when userspace is not
- * universal plane aware. See also enum &drm_plane_type.
+ * universal plane aware. See also &enum drm_plane_type.
  */
 #define drm_for_each_legacy_plane(plane, dev) \
 	list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
diff --git a/include/drm/drm_property.h b/include/drm/drm_property.h
index 43c4b6a2046d..f66fdb47551c 100644
--- a/include/drm/drm_property.h
+++ b/include/drm/drm_property.h
@@ -30,7 +30,7 @@
 /**
  * struct drm_property_enum - symbolic values for enumerations
  * @value: numeric property value for this enum entry
- * @head: list of enum values, linked to enum_list in &drm_property
+ * @head: list of enum values, linked to &drm_property.enum_list
  * @name: symbolic name for the enum
  *
  * For enumeration and bitmask properties this structure stores the symbolic
@@ -191,9 +191,9 @@ struct drm_property {
  * struct drm_property_blob - Blob data for &drm_property
  * @base: base KMS object
  * @dev: DRM device
- * @head_global: entry on the global blob list in &drm_mode_config
- *	property_blob_list.
- * @head_file: entry on the per-file blob list in &drm_file blobs list.
+ * @head_global: entry on the global blob list in
+ * 	&drm_mode_config.property_blob_list.
+ * @head_file: entry on the per-file blob list in &drm_file.blobs list.
  * @length: size of the blob in bytes, invariant over the lifetime of the object
  * @data: actual data, embedded at the end of this structure
  *
diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h
index fe8c4ba905ac..fffbb95a0915 100644
--- a/include/drm/drm_simple_kms_helper.h
+++ b/include/drm/drm_simple_kms_helper.h
@@ -10,6 +10,10 @@
 #ifndef __LINUX_DRM_SIMPLE_KMS_HELPER_H
 #define __LINUX_DRM_SIMPLE_KMS_HELPER_H
 
+#include <drm/drm_crtc.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_plane.h>
+
 struct drm_simple_display_pipe;
 
 /**
@@ -73,9 +77,9 @@ struct drm_simple_display_pipe_funcs {
 	/**
 	 * @prepare_fb:
 	 *
-	 * Optional, called by &struct drm_plane_helper_funcs ->prepare_fb .
-	 * Please read the documentation for the ->prepare_fb hook in
-	 * &struct drm_plane_helper_funcs for more details.
+	 * Optional, called by &drm_plane_helper_funcs.prepare_fb.  Please read
+	 * the documentation for the &drm_plane_helper_funcs.prepare_fb hook for
+	 * more details.
 	 */
 	int (*prepare_fb)(struct drm_simple_display_pipe *pipe,
 			  struct drm_plane_state *plane_state);
@@ -83,9 +87,9 @@ struct drm_simple_display_pipe_funcs {
 	/**
 	 * @cleanup_fb:
 	 *
-	 * Optional, called by &struct drm_plane_helper_funcs ->cleanup_fb .
-	 * Please read the documentation for the ->cleanup_fb hook in
-	 * &struct drm_plane_helper_funcs for more details.
+	 * Optional, called by &drm_plane_helper_funcs.cleanup_fb.  Please read
+	 * the documentation for the &drm_plane_helper_funcs.cleanup_fb hook for
+	 * more details.
 	 */
 	void (*cleanup_fb)(struct drm_simple_display_pipe *pipe,
 			   struct drm_plane_state *plane_state);
diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
index 1596d53c9ccf..ef20abb8119b 100644
--- a/include/uapi/drm/drm_fourcc.h
+++ b/include/uapi/drm/drm_fourcc.h
@@ -167,6 +167,7 @@ extern "C" {
 #define DRM_FORMAT_MOD_VENDOR_NV      0x03
 #define DRM_FORMAT_MOD_VENDOR_SAMSUNG 0x04
 #define DRM_FORMAT_MOD_VENDOR_QCOM    0x05
+#define DRM_FORMAT_MOD_VENDOR_VIVANTE 0x06
 /* add more to the end as needed */
 
 #define fourcc_mod_code(vendor, val) \
@@ -251,6 +252,46 @@ extern "C" {
  */
 #define DRM_FORMAT_MOD_SAMSUNG_64_32_TILE	fourcc_mod_code(SAMSUNG, 1)
 
+/* Vivante framebuffer modifiers */
+
+/*
+ * Vivante 4x4 tiling layout
+ *
+ * This is a simple tiled layout using tiles of 4x4 pixels in a row-major
+ * layout.
+ */
+#define DRM_FORMAT_MOD_VIVANTE_TILED		fourcc_mod_code(VIVANTE, 1)
+
+/*
+ * Vivante 64x64 super-tiling layout
+ *
+ * This is a tiled layout using 64x64 pixel super-tiles, where each super-tile
+ * contains 8x4 groups of 2x4 tiles of 4x4 pixels (like above) each, all in row-
+ * major layout.
+ *
+ * For more information: see
+ * https://github.com/etnaviv/etna_viv/blob/master/doc/hardware.md#texture-tiling
+ */
+#define DRM_FORMAT_MOD_VIVANTE_SUPER_TILED	fourcc_mod_code(VIVANTE, 2)
+
+/*
+ * Vivante 4x4 tiling layout for dual-pipe
+ *
+ * Same as the 4x4 tiling layout, except every second 4x4 pixel tile starts at a
+ * different base address. Offsets from the base addresses are therefore halved
+ * compared to the non-split tiled layout.
+ */
+#define DRM_FORMAT_MOD_VIVANTE_SPLIT_TILED	fourcc_mod_code(VIVANTE, 3)
+
+/*
+ * Vivante 64x64 super-tiling layout for dual-pipe
+ *
+ * Same as the 64x64 super-tiling layout, except every second 4x4 pixel tile
+ * starts at a different base address. Offsets from the base addresses are
+ * therefore halved compared to the non-split super-tiled layout.
+ */
+#define DRM_FORMAT_MOD_VIVANTE_SPLIT_SUPER_TILED fourcc_mod_code(VIVANTE, 4)
+
 #if defined(__cplusplus)
 }
 #endif