serial: 8250_pci: Add support for Sunix serial boards

Add support to Sunix serial boards with up to 16 ports.

Sunix board need its own setup callback instead of using Timedia's, to
properly support more than 4 ports.

Cc: Morris Ku <morris_ku@sunix.com>
Cc: Debbie Liu <debbie_liu@sunix.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20190809190130.30773-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 84 insertions, 17 deletions

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index d0be326a17e5..c0d10a35bf70 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1803,6 +1803,30 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 	return pci_default_setup(priv, board, port, idx);
 }
 
+static int
+pci_sunix_setup(struct serial_private *priv,
+		const struct pciserial_board *board,
+		struct uart_8250_port *port, int idx)
+{
+	int bar;
+	int offset;
+
+	port->port.flags |= UPF_FIXED_TYPE;
+	port->port.type = PORT_SUNIX;
+
+	if (idx < 4) {
+		bar = 0;
+		offset = idx * board->uart_offset;
+	} else {
+		bar = 1;
+		idx -= 4;
+		idx = div_s64_rem(idx, 4, &offset);
+		offset = idx * 64 + offset * board->uart_offset;
+	}
+
+	return setup_port(priv, port, bar, offset, 0);
+}
+
 #define PCI_VENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_SUBVENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_DEVICE_ID_OCTPRO		0x0001
@@ -2490,21 +2514,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.setup		= pci_timedia_setup,
 	},
 	/*
-	 * SUNIX (Timedia) cards
-	 * Do not "probe" for these cards as there is at least one combination
-	 * card that should be handled by parport_pc that doesn't match the
-	 * rule in pci_timedia_probe.
-	 * It is part number is MIO5079A but its subdevice ID is 0x0102.
-	 * There are some boards with part number SER5037AL that report
-	 * subdevice ID 0x0002.
+	 * Sunix PCI serial boards
 	 */
 	{
 		.vendor		= PCI_VENDOR_ID_SUNIX,
 		.device		= PCI_DEVICE_ID_SUNIX_1999,
 		.subvendor	= PCI_VENDOR_ID_SUNIX,
 		.subdevice	= PCI_ANY_ID,
-		.init		= pci_timedia_init,
-		.setup		= pci_timedia_setup,
+		.setup		= pci_sunix_setup,
 	},
 	/*
 	 * Xircom cards
@@ -2965,6 +2982,11 @@ enum pci_board_num_t {
 	pbn_pericom_PI7C9X7952,
 	pbn_pericom_PI7C9X7954,
 	pbn_pericom_PI7C9X7958,
+	pbn_sunix_pci_1s,
+	pbn_sunix_pci_2s,
+	pbn_sunix_pci_4s,
+	pbn_sunix_pci_8s,
+	pbn_sunix_pci_16s,
 };
 
 /*
@@ -3751,6 +3773,31 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud      = 921600,
 		.uart_offset	= 0x8,
 	},
+	[pbn_sunix_pci_1s] = {
+		.num_ports	= 1,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_2s] = {
+		.num_ports	= 2,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_4s] = {
+		.num_ports	= 4,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_8s] = {
+		.num_ports	= 8,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_16s] = {
+		.num_ports	= 16,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
 };
 
 static const struct pci_device_id blacklist[] = {
@@ -4788,17 +4835,29 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		pbn_b0_bt_1_921600 },
 
 	/*
-	 * SUNIX (TIMEDIA)
+	 * Sunix PCI serial boards
 	 */
 	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
-		PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
-		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00,
-		pbn_b0_bt_1_921600 },
-
+		PCI_VENDOR_ID_SUNIX, 0x0001, 0, 0,
+		pbn_sunix_pci_1s },
 	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
-		PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
-		PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
-		pbn_b0_bt_1_921600 },
+		PCI_VENDOR_ID_SUNIX, 0x0002, 0, 0,
+		pbn_sunix_pci_2s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0004, 0, 0,
+		pbn_sunix_pci_4s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0084, 0, 0,
+		pbn_sunix_pci_4s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0008, 0, 0,
+		pbn_sunix_pci_8s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0088, 0, 0,
+		pbn_sunix_pci_8s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0010, 0, 0,
+		pbn_sunix_pci_16s },
 
 	/*
 	 * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 706645f89132..8407166610ce 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -301,6 +301,14 @@ static const struct serial8250_config uart_config[] = {
 		.rxtrig_bytes	= {1, 4, 8, 14},
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_SUNIX] = {
+		.name		= "Sunix",
+		.fifo_size	= 128,
+		.tx_loadsz	= 128,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.rxtrig_bytes	= {1, 32, 64, 112},
+		.flags		= UART_CAP_FIFO | UART_CAP_SLEEP,
+	},
 };
 
 /* Uart divisor latch read */