summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/tidss/tidss_plane.c
diff options
context:
space:
mode:
authorJyri Sarha <jsarha@ti.com>2019-11-08 09:45:28 +0200
committerJyri Sarha <jsarha@ti.com>2020-01-27 19:27:30 +0200
commit32a1795f57eecc3974901760400618571c9d357f (patch)
tree86d87677d4269bb9120268d5c3de91cc4b4938ec /drivers/gpu/drm/tidss/tidss_plane.c
parent6057317cb76c9a94ba3f00562598e4f77442133b (diff)
drm/tidss: New driver for TI Keystone platform Display SubSystem
This patch adds a new DRM driver for Texas Instruments DSS IPs used on Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is a major change to the older DSS IP versions, which are supported by the omapdrm driver. While on higher level the Keystone DSS resembles the older DSS versions, the registers are completely different and the internal pipelines differ a lot. DSS IP found on K2G is an "ultra-light" version, and has only a single plane and a single output. The K3 DSS IPs are found on AM65x and J721E SoCs. AM65x DSS has two video ports, one full video plane, and another "lite" plane without scaling support. J721E has 4 video ports, 2 video planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS) output. Version history: v2: - rebased on top of drm-next-2019-11-27 - sort all include lines in all files - remove all include <drm/drmP.h> - remove select "select VIDEOMODE_HELPERS" - call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no to call it in new modeset case as it is also called in vp_enable()) - change probe sequence and drm_device allocation (follow example in drm_drv.c) - use __maybe_unused instead of #ifdef for pm functions - remove "struct drm_fbdev_cma *fbdev;" from driver data - check panel connector type before connecting it v3: no change v4: no change v5: - remove fifo underflow irq handling, it is not an error and it should be used for debug purposes only - memory tuning, prefetch plane fifo up to high-threshold value to minimize possibility of underflows. v6: - Check CTM and gamma support from dispc_features when creating crtc - Implement CTM support for k2g and fix k3 CTM implementation - Remove gamma property persistence and always write color properties in a new modeset v7: - Fix checkpatch.pl --strict issues - Rebase on top of drm-misc-next-2020-01-10 v8: - Remove idle debug prints from dispc_init() - Add Reviewed-by: Benoit Parrot <bparrot@ti.com> v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid conflict exported omapfb function with same name - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com
Diffstat (limited to 'drivers/gpu/drm/tidss/tidss_plane.c')
-rw-r--r--drivers/gpu/drm/tidss/tidss_plane.c217
1 files changed, 217 insertions, 0 deletions
diff --git a/drivers/gpu/drm/tidss/tidss_plane.c b/drivers/gpu/drm/tidss/tidss_plane.c
new file mode 100644
index 000000000000..ff99b2dd4a17
--- /dev/null
+++ b/drivers/gpu/drm/tidss/tidss_plane.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_fb_cma_helper.h>
+
+#include "tidss_crtc.h"
+#include "tidss_dispc.h"
+#include "tidss_drv.h"
+#include "tidss_plane.h"
+
+/* drm_plane_helper_funcs */
+
+static int tidss_plane_atomic_check(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ struct drm_device *ddev = plane->dev;
+ struct tidss_device *tidss = ddev->dev_private;
+ struct tidss_plane *tplane = to_tidss_plane(plane);
+ const struct drm_format_info *finfo;
+ struct drm_crtc_state *crtc_state;
+ u32 hw_plane = tplane->hw_plane_id;
+ u32 hw_videoport;
+ int ret;
+
+ dev_dbg(ddev->dev, "%s\n", __func__);
+
+ if (!state->crtc) {
+ /*
+ * The visible field is not reset by the DRM core but only
+ * updated by drm_plane_helper_check_state(), set it manually.
+ */
+ state->visible = false;
+ return 0;
+ }
+
+ crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+
+ ret = drm_atomic_helper_check_plane_state(state, crtc_state, 0,
+ INT_MAX, true, true);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The HW is only able to start drawing at subpixel boundary
+ * (the two first checks bellow). At the end of a row the HW
+ * can only jump integer number of subpixels forward to the
+ * beginning of the next row. So we can only show picture with
+ * integer subpixel width (the third check). However, after
+ * reaching the end of the drawn picture the drawing starts
+ * again at the absolute memory address where top left corner
+ * position of the drawn picture is (so there is no need to
+ * check for odd height).
+ */
+
+ finfo = drm_format_info(state->fb->format->format);
+
+ if ((state->src_x >> 16) % finfo->hsub != 0) {
+ dev_dbg(ddev->dev,
+ "%s: x-position %u not divisible subpixel size %u\n",
+ __func__, (state->src_x >> 16), finfo->hsub);
+ return -EINVAL;
+ }
+
+ if ((state->src_y >> 16) % finfo->vsub != 0) {
+ dev_dbg(ddev->dev,
+ "%s: y-position %u not divisible subpixel size %u\n",
+ __func__, (state->src_y >> 16), finfo->vsub);
+ return -EINVAL;
+ }
+
+ if ((state->src_w >> 16) % finfo->hsub != 0) {
+ dev_dbg(ddev->dev,
+ "%s: src width %u not divisible by subpixel size %u\n",
+ __func__, (state->src_w >> 16), finfo->hsub);
+ return -EINVAL;
+ }
+
+ if (!state->visible)
+ return 0;
+
+ hw_videoport = to_tidss_crtc(state->crtc)->hw_videoport;
+
+ ret = dispc_plane_check(tidss->dispc, hw_plane, state, hw_videoport);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void tidss_plane_atomic_update(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ struct drm_device *ddev = plane->dev;
+ struct tidss_device *tidss = ddev->dev_private;
+ struct tidss_plane *tplane = to_tidss_plane(plane);
+ struct drm_plane_state *state = plane->state;
+ u32 hw_videoport;
+ int ret;
+
+ dev_dbg(ddev->dev, "%s\n", __func__);
+
+ if (!state->visible) {
+ dispc_plane_enable(tidss->dispc, tplane->hw_plane_id, false);
+ return;
+ }
+
+ hw_videoport = to_tidss_crtc(state->crtc)->hw_videoport;
+
+ ret = dispc_plane_setup(tidss->dispc, tplane->hw_plane_id,
+ state, hw_videoport);
+
+ if (ret) {
+ dev_err(plane->dev->dev, "%s: Failed to setup plane %d\n",
+ __func__, tplane->hw_plane_id);
+ dispc_plane_enable(tidss->dispc, tplane->hw_plane_id, false);
+ return;
+ }
+
+ dispc_plane_enable(tidss->dispc, tplane->hw_plane_id, true);
+}
+
+static void tidss_plane_atomic_disable(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ struct drm_device *ddev = plane->dev;
+ struct tidss_device *tidss = ddev->dev_private;
+ struct tidss_plane *tplane = to_tidss_plane(plane);
+
+ dev_dbg(ddev->dev, "%s\n", __func__);
+
+ dispc_plane_enable(tidss->dispc, tplane->hw_plane_id, false);
+}
+
+static const struct drm_plane_helper_funcs tidss_plane_helper_funcs = {
+ .atomic_check = tidss_plane_atomic_check,
+ .atomic_update = tidss_plane_atomic_update,
+ .atomic_disable = tidss_plane_atomic_disable,
+};
+
+static const struct drm_plane_funcs tidss_plane_funcs = {
+ .update_plane = drm_atomic_helper_update_plane,
+ .disable_plane = drm_atomic_helper_disable_plane,
+ .reset = drm_atomic_helper_plane_reset,
+ .destroy = drm_plane_cleanup,
+ .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+};
+
+struct tidss_plane *tidss_plane_create(struct tidss_device *tidss,
+ u32 hw_plane_id, u32 plane_type,
+ u32 crtc_mask, const u32 *formats,
+ u32 num_formats)
+{
+ struct tidss_plane *tplane;
+ enum drm_plane_type type;
+ u32 possible_crtcs;
+ u32 num_planes = tidss->feat->num_planes;
+ u32 color_encodings = (BIT(DRM_COLOR_YCBCR_BT601) |
+ BIT(DRM_COLOR_YCBCR_BT709));
+ u32 color_ranges = (BIT(DRM_COLOR_YCBCR_FULL_RANGE) |
+ BIT(DRM_COLOR_YCBCR_LIMITED_RANGE));
+ u32 default_encoding = DRM_COLOR_YCBCR_BT601;
+ u32 default_range = DRM_COLOR_YCBCR_FULL_RANGE;
+ u32 blend_modes = (BIT(DRM_MODE_BLEND_PREMULTI) |
+ BIT(DRM_MODE_BLEND_COVERAGE));
+ int ret;
+
+ tplane = devm_kzalloc(tidss->dev, sizeof(*tplane), GFP_KERNEL);
+ if (!tplane)
+ return ERR_PTR(-ENOMEM);
+
+ tplane->hw_plane_id = hw_plane_id;
+
+ possible_crtcs = crtc_mask;
+ type = plane_type;
+
+ ret = drm_universal_plane_init(&tidss->ddev, &tplane->plane,
+ possible_crtcs,
+ &tidss_plane_funcs,
+ formats, num_formats,
+ NULL, type, NULL);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ drm_plane_helper_add(&tplane->plane, &tidss_plane_helper_funcs);
+
+ drm_plane_create_zpos_property(&tplane->plane, hw_plane_id, 0,
+ num_planes - 1);
+
+ ret = drm_plane_create_color_properties(&tplane->plane,
+ color_encodings,
+ color_ranges,
+ default_encoding,
+ default_range);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ret = drm_plane_create_alpha_property(&tplane->plane);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ret = drm_plane_create_blend_mode_property(&tplane->plane, blend_modes);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return tplane;
+}