drm/amd/powerplay: revise the way to retrieve the board parameters

It can support different NV1x ASIC better. And this can guard
no member got missing.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1 files changed, 102 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h
index 70146518174c..a6f6e6bf5992 100644
--- a/drivers/gpu/drm/amd/include/atomfirmware.h
+++ b/drivers/gpu/drm/amd/include/atomfirmware.h
@@ -1876,6 +1876,108 @@ struct atom_smc_dpm_info_v4_6
   uint32_t   boardreserved[10];
 };
 
+struct atom_smc_dpm_info_v4_7
+{
+  struct   atom_common_table_header  table_header;
+    // SECTION: BOARD PARAMETERS
+    // I2C Control
+  struct smudpm_i2c_controller_config_v2  I2cControllers[8];
+
+  // SVI2 Board Parameters
+  uint16_t     MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
+  uint16_t     MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
+
+  uint8_t      VddGfxVrMapping;   // Use VR_MAPPING* bitfields
+  uint8_t      VddSocVrMapping;   // Use VR_MAPPING* bitfields
+  uint8_t      VddMem0VrMapping;  // Use VR_MAPPING* bitfields
+  uint8_t      VddMem1VrMapping;  // Use VR_MAPPING* bitfields
+
+  uint8_t      GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
+  uint8_t      SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
+  uint8_t      ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN)
+  uint8_t      Padding8_V;
+
+  // Telemetry Settings
+  uint16_t     GfxMaxCurrent;   // in Amps
+  uint8_t      GfxOffset;       // in Amps
+  uint8_t      Padding_TelemetryGfx;
+  uint16_t     SocMaxCurrent;   // in Amps
+  uint8_t      SocOffset;       // in Amps
+  uint8_t      Padding_TelemetrySoc;
+
+  uint16_t     Mem0MaxCurrent;   // in Amps
+  uint8_t      Mem0Offset;       // in Amps
+  uint8_t      Padding_TelemetryMem0;
+
+  uint16_t     Mem1MaxCurrent;   // in Amps
+  uint8_t      Mem1Offset;       // in Amps
+  uint8_t      Padding_TelemetryMem1;
+
+  // GPIO Settings
+  uint8_t      AcDcGpio;        // GPIO pin configured for AC/DC switching
+  uint8_t      AcDcPolarity;    // GPIO polarity for AC/DC switching
+  uint8_t      VR0HotGpio;      // GPIO pin configured for VR0 HOT event
+  uint8_t      VR0HotPolarity;  // GPIO polarity for VR0 HOT event
+
+  uint8_t      VR1HotGpio;      // GPIO pin configured for VR1 HOT event
+  uint8_t      VR1HotPolarity;  // GPIO polarity for VR1 HOT event
+  uint8_t      GthrGpio;        // GPIO pin configured for GTHR Event
+  uint8_t      GthrPolarity;    // replace GPIO polarity for GTHR
+
+  // LED Display Settings
+  uint8_t      LedPin0;         // GPIO number for LedPin[0]
+  uint8_t      LedPin1;         // GPIO number for LedPin[1]
+  uint8_t      LedPin2;         // GPIO number for LedPin[2]
+  uint8_t      padding8_4;
+
+  // GFXCLK PLL Spread Spectrum
+  uint8_t      PllGfxclkSpreadEnabled;   // on or off
+  uint8_t      PllGfxclkSpreadPercent;   // Q4.4
+  uint16_t     PllGfxclkSpreadFreq;      // kHz
+
+  // GFXCLK DFLL Spread Spectrum
+  uint8_t      DfllGfxclkSpreadEnabled;   // on or off
+  uint8_t      DfllGfxclkSpreadPercent;   // Q4.4
+  uint16_t     DfllGfxclkSpreadFreq;      // kHz
+
+  // UCLK Spread Spectrum
+  uint8_t      UclkSpreadEnabled;   // on or off
+  uint8_t      UclkSpreadPercent;   // Q4.4
+  uint16_t     UclkSpreadFreq;      // kHz
+
+  // SOCCLK Spread Spectrum
+  uint8_t      SoclkSpreadEnabled;   // on or off
+  uint8_t      SocclkSpreadPercent;   // Q4.4
+  uint16_t     SocclkSpreadFreq;      // kHz
+
+  // Total board power
+  uint16_t     TotalBoardPower;     //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power
+  uint16_t     BoardPadding;
+
+  // Mvdd Svi2 Div Ratio Setting
+  uint32_t     MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16)
+
+  // GPIO pins for I2C communications with 2nd controller for Input Telemetry Sequence
+  uint8_t      GpioI2cScl;          // Serial Clock
+  uint8_t      GpioI2cSda;          // Serial Data
+  uint16_t     GpioPadding;
+
+  // Additional LED Display Settings
+  uint8_t      LedPin3;         // GPIO number for LedPin[3] - PCIE GEN Speed
+  uint8_t      LedPin4;         // GPIO number for LedPin[4] - PMFW Error Status
+  uint16_t     LedEnableMask;
+
+  // Power Limit Scalars
+  uint8_t      PowerLimitScalar[4];    //[PPT_THROTTLER_COUNT]
+
+  uint8_t      MvddUlvPhaseSheddingMask;
+  uint8_t      VddciUlvPhaseSheddingMask;
+  uint8_t      Padding8_Psi1;
+  uint8_t      Padding8_Psi2;
+
+  uint32_t     BoardReserved[5];
+};
+
 /* 
   ***************************************************************************
     Data Table asic_profiling_info  structure