diff options
| author | Vladimir Zapolskiy <vz@mleia.com> | 2019-01-29 21:20:49 +0200 |
|---|---|---|
| committer | Vladimir Zapolskiy <vz@mleia.com> | 2019-02-03 21:40:41 +0200 |
| commit | 49bb0b964c1f067aeb282e85e42123cc36b7b147 (patch) | |
| tree | 6de5da2e5b0cb213a68a8b4e8e2015dd8b26a34e /arch/arm/mach-lpc32xx | |
| parent | 3e742d0d95eae29a833f4518b0543bd61b369b65 (diff) | |
ARM: lpc32xx: remove platform data of ARM PL111 LCD controller
The auxilary platform data added for the LCD controller is not needed
anymore, because the controller and a connected panel are properly
described in Phytec phyCORE-LPC3250 board dts file.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Diffstat (limited to 'arch/arm/mach-lpc32xx')
| -rw-r--r-- | arch/arm/mach-lpc32xx/phy3250.c | 77 |
1 files changed, 0 insertions, 77 deletions
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 568589e918c2..b3be60a8e467 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -45,73 +45,6 @@ #include <mach/board.h> #include "common.h" -/* - * AMBA LCD controller - */ -static struct clcd_panel conn_lcd_panel = { - .mode = { - .name = "QVGA portrait", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 191828, - .left_margin = 22, - .right_margin = 11, - .upper_margin = 2, - .lower_margin = 1, - .hsync_len = 5, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = (TIM2_IVS | TIM2_IHS), - .cntl = (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) | - CNTL_LCDBPP16_565), - .bpp = 16, -}; -#define PANEL_SIZE (3 * SZ_64K) - -static int lpc32xx_clcd_setup(struct clcd_fb *fb) -{ - dma_addr_t dma; - - fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma, - GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = PANEL_SIZE; - fb->panel = &conn_lcd_panel; - - return 0; -} - -static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, - fb->fb.fix.smem_start, fb->fb.fix.smem_len); -} - -static void lpc32xx_clcd_remove(struct clcd_fb *fb) -{ - dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, - fb->fb.fix.smem_start); -} - -static struct clcd_board lpc32xx_clcd_data = { - .name = "Phytec LCD", - .check = clcdfb_check, - .decode = clcdfb_decode, - .setup = lpc32xx_clcd_setup, - .mmap = lpc32xx_clcd_mmap, - .remove = lpc32xx_clcd_remove, -}; - static struct pl08x_channel_data pl08x_slave_channels[] = { { .bus_id = "nand-slc", @@ -159,7 +92,6 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = { static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL), OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL), - OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data), OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd), OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash", &lpc32xx_slc_data), @@ -170,15 +102,6 @@ static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = { static void __init lpc3250_machine_init(void) { - u32 tmp; - - /* Setup LCD muxing to RGB565 */ - tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) & - ~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK | - LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK); - tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16; - __raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL); - lpc32xx_serial_init(); /* Test clock needed for UDA1380 initial init */ |