summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-04-26 11:12:30 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2020-04-26 11:12:30 -0700
commitedf17b283844a21b338b9618107c8817105d0ffa (patch)
tree9a18487e08d6816833fc998f18cd2e35b3b51916
parenta8a0e2a96b7dcf7065f97db915e2deb92bf56634 (diff)
parent664ba5180234593b4b8517530e8198bf2f7359e2 (diff)
Merge tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH: "Here are some small staging and IIO driver fixes for 5.7-rc3 Lots of tiny things for reported issues in staging and IIO drivers, including a counter driver fix as well (the iio drivers seem to be tied to those). Full details of the fixes are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (27 commits) staging: vt6656: Fix calling conditions of vnt_set_bss_mode staging: comedi: Fix comedi_device refcnt leak in comedi_open staging: vt6656: Fix pairwise key entry save. staging: vt6656: Fix drivers TBTT timing counter. staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default. MAINTAINERS: remove Stefan Popa's email iio: adc: ad7192: fix null pointer de-reference crash during probe iio: core: remove extra semi-colon from devm_iio_device_register() macro iio: adc: ti-ads8344: properly byte swap value iio: imu: inv_mpu6050: fix suspend/resume with runtime power iio: st_sensors: rely on odr mask to know if odr can be set iio: xilinx-xadc: Make sure not exceed maximum samplerate iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode iio: xilinx-xadc: Fix clearing interrupt when enabling trigger iio: xilinx-xadc: Fix ADC-B powerdown iio: dac: ad5770r: fix off-by-one check on maximum number of channels iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device iio: core: Fix handling of 'dB' dt-bindings: iio: adc: stm32-adc: fix id relative path counter: 104-quad-8: Add lock guards - generic interface ...
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml2
-rw-r--r--MAINTAINERS15
-rw-r--r--drivers/counter/104-quad-8.c194
-rw-r--r--drivers/iio/adc/ad7192.c63
-rw-r--r--drivers/iio/adc/ad7793.c2
-rw-r--r--drivers/iio/adc/stm32-adc.c31
-rw-r--r--drivers/iio/adc/ti-ads8344.c6
-rw-r--r--drivers/iio/adc/xilinx-xadc-core.c95
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.c2
-rw-r--r--drivers/iio/dac/ad5770r.c2
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_core.c11
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h3
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c23
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c24
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c29
-rw-r--r--drivers/iio/industrialio-core.c7
-rw-r--r--drivers/staging/comedi/comedi_fops.c4
-rw-r--r--drivers/staging/comedi/drivers/dt2815.c3
-rw-r--r--drivers/staging/gasket/gasket_sysfs.c3
-rw-r--r--drivers/staging/gasket/gasket_sysfs.h4
-rw-r--r--drivers/staging/vt6656/key.c14
-rw-r--r--drivers/staging/vt6656/main_usb.c31
-rw-r--r--drivers/staging/vt6656/usbpipe.c3
-rw-r--r--include/linux/iio/iio.h2
24 files changed, 429 insertions, 144 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index 933ba37944d7..dd8eb15aeb63 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/bindings/iio/adc/st,stm32-adc.yaml#"
+$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: STMicroelectronics STM32 ADC bindings
diff --git a/MAINTAINERS b/MAINTAINERS
index 453fe0713e68..26f281d9f32a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -570,7 +570,7 @@ F: Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
F: drivers/input/misc/adxl34x.c
ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <michael.hennerich@analog.com>
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -922,7 +922,7 @@ F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
F: drivers/net/ethernet/amd/xgbe/
ANALOG DEVICES INC AD5686 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-pm@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
@@ -930,7 +930,7 @@ F: drivers/iio/dac/ad5686*
F: drivers/iio/dac/ad5696*
ANALOG DEVICES INC AD5758 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
@@ -946,7 +946,7 @@ F: Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
F: drivers/iio/adc/ad7091r5.c
ANALOG DEVICES INC AD7124 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
@@ -970,7 +970,7 @@ F: Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
F: drivers/iio/adc/ad7292.c
ANALOG DEVICES INC AD7606 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
M: Beniamin Bia <beniamin.bia@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
@@ -979,7 +979,7 @@ F: Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
F: drivers/iio/adc/ad7606.c
ANALOG DEVICES INC AD7768-1 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
@@ -1040,7 +1040,7 @@ F: Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
F: drivers/hwmon/adm1177.c
ANALOG DEVICES INC ADP5061 DRIVER
-M: Stefan Popa <stefan.popa@analog.com>
+M: Michael Hennerich <Michael.Hennerich@analog.com>
L: linux-pm@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
@@ -1109,7 +1109,6 @@ F: drivers/iio/amplifiers/hmc425a.c
ANALOG DEVICES INC IIO DRIVERS
M: Lars-Peter Clausen <lars@metafoo.de>
M: Michael Hennerich <Michael.Hennerich@analog.com>
-M: Stefan Popa <stefan.popa@analog.com>
S: Supported
W: http://wiki.analog.com/
W: http://ez.analog.com/community/linux-device-drivers
diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
index 9dab190c49b0..aa13708c2bc3 100644
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -44,6 +44,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
* @base: base port address of the IIO device
*/
struct quad8_iio {
+ struct mutex lock;
struct counter_device counter;
unsigned int fck_prescaler[QUAD8_NUM_COUNTERS];
unsigned int preset[QUAD8_NUM_COUNTERS];
@@ -123,6 +124,8 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
/* Borrow XOR Carry effectively doubles count range */
*val = (borrow ^ carry) << 24;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
@@ -130,6 +133,8 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
for (i = 0; i < 3; i++)
*val |= (unsigned int)inb(base_offset) << (8 * i);
+ mutex_unlock(&priv->lock);
+
return IIO_VAL_INT;
case IIO_CHAN_INFO_ENABLE:
*val = priv->ab_enable[chan->channel];
@@ -160,6 +165,8 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
if ((unsigned int)val > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
@@ -183,12 +190,16 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
case IIO_CHAN_INFO_ENABLE:
/* only boolean values accepted */
if (val < 0 || val > 1)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
priv->ab_enable[chan->channel] = val;
ior_cfg = val | priv->preset_enable[chan->channel] << 1;
@@ -196,11 +207,18 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
case IIO_CHAN_INFO_SCALE:
+ mutex_lock(&priv->lock);
+
/* Quadrature scaling only available in quadrature mode */
- if (!priv->quadrature_mode[chan->channel] && (val2 || val != 1))
+ if (!priv->quadrature_mode[chan->channel] &&
+ (val2 || val != 1)) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
/* Only three gain states (1, 0.5, 0.25) */
if (val == 1 && !val2)
@@ -214,11 +232,15 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
priv->quadrature_scale[chan->channel] = 2;
break;
default:
+ mutex_unlock(&priv->lock);
return -EINVAL;
}
- else
+ else {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
+ mutex_unlock(&priv->lock);
return 0;
}
@@ -255,6 +277,8 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
if (preset > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
priv->preset[chan->channel] = preset;
/* Reset Byte Pointer */
@@ -264,6 +288,8 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
for (i = 0; i < 3; i++)
outb(preset >> (8 * i), base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -293,6 +319,8 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
+ mutex_lock(&priv->lock);
+
priv->preset_enable[chan->channel] = preset_enable;
ior_cfg = priv->ab_enable[chan->channel] |
@@ -301,6 +329,8 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -358,6 +388,8 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
unsigned int mode_cfg = cnt_mode << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ mutex_lock(&priv->lock);
+
priv->count_mode[chan->channel] = cnt_mode;
/* Add quadrature mode configuration */
@@ -367,6 +399,8 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -394,19 +428,26 @@ static int quad8_set_synchronous_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int synchronous_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- const unsigned int idr_cfg = synchronous_mode |
- priv->index_polarity[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int idr_cfg = synchronous_mode;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->index_polarity[chan->channel] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
- if (synchronous_mode && !priv->quadrature_mode[chan->channel])
+ if (synchronous_mode && !priv->quadrature_mode[chan->channel]) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
priv->synchronous_mode[chan->channel] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -434,8 +475,12 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int quadrature_mode)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- unsigned int mode_cfg = priv->count_mode[chan->channel] << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int mode_cfg;
+
+ mutex_lock(&priv->lock);
+
+ mode_cfg = priv->count_mode[chan->channel] << 1;
if (quadrature_mode)
mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
@@ -453,6 +498,8 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -480,15 +527,20 @@ static int quad8_set_index_polarity(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int index_polarity)
{
struct quad8_iio *const priv = iio_priv(indio_dev);
- const unsigned int idr_cfg = priv->synchronous_mode[chan->channel] |
- index_polarity << 1;
const int base_offset = priv->base + 2 * chan->channel + 1;
+ unsigned int idr_cfg = index_polarity << 1;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->synchronous_mode[chan->channel];
priv->index_polarity[chan->channel] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -589,7 +641,7 @@ static int quad8_signal_read(struct counter_device *counter,
static int quad8_count_read(struct counter_device *counter,
struct counter_count *count, unsigned long *val)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
unsigned int flags;
unsigned int borrow;
@@ -603,6 +655,8 @@ static int quad8_count_read(struct counter_device *counter,
/* Borrow XOR Carry effectively doubles count range */
*val = (unsigned long)(borrow ^ carry) << 24;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer; transfer Counter to Output Latch */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
base_offset + 1);
@@ -610,13 +664,15 @@ static int quad8_count_read(struct counter_device *counter,
for (i = 0; i < 3; i++)
*val |= (unsigned long)inb(base_offset) << (8 * i);
+ mutex_unlock(&priv->lock);
+
return 0;
}
static int quad8_count_write(struct counter_device *counter,
struct counter_count *count, unsigned long val)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int base_offset = priv->base + 2 * count->id;
int i;
@@ -624,6 +680,8 @@ static int quad8_count_write(struct counter_device *counter,
if (val > 0xFFFFFF)
return -EINVAL;
+ mutex_lock(&priv->lock);
+
/* Reset Byte Pointer */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
@@ -647,6 +705,8 @@ static int quad8_count_write(struct counter_device *counter,
/* Reset Error flag */
outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -667,13 +727,13 @@ static enum counter_count_function quad8_count_functions_list[] = {
static int quad8_function_get(struct counter_device *counter,
struct counter_count *count, size_t *function)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
const int id = count->id;
- const unsigned int quadrature_mode = priv->quadrature_mode[id];
- const unsigned int scale = priv->quadrature_scale[id];
- if (quadrature_mode)
- switch (scale) {
+ mutex_lock(&priv->lock);
+
+ if (priv->quadrature_mode[id])
+ switch (priv->quadrature_scale[id]) {
case 0:
*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X1;
break;
@@ -687,6 +747,8 @@ static int quad8_function_get(struct counter_device *counter,
else
*function = QUAD8_COUNT_FUNCTION_PULSE_DIRECTION;
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -697,10 +759,15 @@ static int quad8_function_set(struct counter_device *counter,
const int id = count->id;
unsigned int *const quadrature_mode = priv->quadrature_mode + id;
unsigned int *const scale = priv->quadrature_scale + id;
- unsigned int mode_cfg = priv->count_mode[id] << 1;
unsigned int *const synchronous_mode = priv->synchronous_mode + id;
- const unsigned int idr_cfg = priv->index_polarity[id] << 1;
const int base_offset = priv->base + 2 * id + 1;
+ unsigned int mode_cfg;
+ unsigned int idr_cfg;
+
+ mutex_lock(&priv->lock);
+
+ mode_cfg = priv->count_mode[id] << 1;
+ idr_cfg = priv->index_polarity[id] << 1;
if (function == QUAD8_COUNT_FUNCTION_PULSE_DIRECTION) {
*quadrature_mode = 0;
@@ -736,6 +803,8 @@ static int quad8_function_set(struct counter_device *counter,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -852,15 +921,20 @@ static int quad8_index_polarity_set(struct counter_device *counter,
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
- const unsigned int idr_cfg = priv->synchronous_mode[channel_id] |
- index_polarity << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
+ unsigned int idr_cfg = index_polarity << 1;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->synchronous_mode[channel_id];
priv->index_polarity[channel_id] = index_polarity;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -887,19 +961,26 @@ static int quad8_synchronous_mode_set(struct counter_device *counter,
{
struct quad8_iio *const priv = counter->priv;
const size_t channel_id = signal->id - 16;
- const unsigned int idr_cfg = synchronous_mode |
- priv->index_polarity[channel_id] << 1;
const int base_offset = priv->base + 2 * channel_id + 1;
+ unsigned int idr_cfg = synchronous_mode;
+
+ mutex_lock(&priv->lock);
+
+ idr_cfg |= priv->index_polarity[channel_id] << 1;
/* Index function must be non-synchronous in non-quadrature mode */
- if (synchronous_mode && !priv->quadrature_mode[channel_id])
+ if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
+ mutex_unlock(&priv->lock);
return -EINVAL;
+ }
priv->synchronous_mode[channel_id] = synchronous_mode;
/* Load Index Control configuration to Index Control Register */
outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -964,6 +1045,8 @@ static int quad8_count_mode_set(struct counter_device *counter,
break;
}
+ mutex_lock(&priv->lock);
+
priv->count_mode[count->id] = cnt_mode;
/* Set count mode configuration value */
@@ -976,6 +1059,8 @@ static int quad8_count_mode_set(struct counter_device *counter,
/* Load mode configuration to Counter Mode Register */
outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return 0;
}
@@ -1017,6 +1102,8 @@ static ssize_t quad8_count_enable_write(struct counter_device *counter,
if (err)
return err;
+ mutex_lock(&priv->lock);
+
priv->ab_enable[count->id] = ab_enable;
ior_cfg = ab_enable | priv->preset_enable[count->id] << 1;
@@ -1024,6 +1111,8 @@ static ssize_t quad8_count_enable_write(struct counter_device *counter,
/* Load I/O control configuration */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -1052,14 +1141,28 @@ static ssize_t quad8_count_preset_read(struct counter_device *counter,
return sprintf(buf, "%u\n", priv->preset[count->id]);
}
+static void quad8_preset_register_set(struct quad8_iio *quad8iio, int id,
+ unsigned int preset)
+{
+ const unsigned int base_offset = quad8iio->base + 2 * id;
+ int i;
+
+ quad8iio->preset[id] = preset;
+
+ /* Reset Byte Pointer */
+ outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+
+ /* Set Preset Register */
+ for (i = 0; i < 3; i++)
+ outb(preset >> (8 * i), base_offset);
+}
+
static ssize_t quad8_count_preset_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
- const int base_offset = priv->base + 2 * count->id;
unsigned int preset;
int ret;
- int i;
ret = kstrtouint(buf, 0, &preset);
if (ret)
@@ -1069,14 +1172,11 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
if (preset > 0xFFFFFF)
return -EINVAL;
- priv->preset[count->id] = preset;
+ mutex_lock(&priv->lock);
- /* Reset Byte Pointer */
- outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+ quad8_preset_register_set(priv, count->id, preset);
- /* Set Preset Register */
- for (i = 0; i < 3; i++)
- outb(preset >> (8 * i), base_offset);
+ mutex_unlock(&priv->lock);
return len;
}
@@ -1084,15 +1184,20 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
static ssize_t quad8_count_ceiling_read(struct counter_device *counter,
struct counter_count *count, void *private, char *buf)
{
- const struct quad8_iio *const priv = counter->priv;
+ struct quad8_iio *const priv = counter->priv;
+
+ mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
- return quad8_count_preset_read(counter, count, private, buf);
+ mutex_unlock(&priv->lock);
+ return sprintf(buf, "%u\n", priv->preset[count->id]);
}
+ mutex_unlock(&priv->lock);
+
/* By default 0x1FFFFFF (25 bits unsigned) is maximum count */
return sprintf(buf, "33554431\n");
}
@@ -1101,15 +1206,29 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
struct counter_count *count, void *private, const char *buf, size_t len)
{
struct quad8_iio *const priv = counter->priv;
+ unsigned int ceiling;
+ int ret;
+
+ ret = kstrtouint(buf, 0, &ceiling);
+ if (ret)
+ return ret;
+
+ /* Only 24-bit values are supported */
+ if (ceiling > 0xFFFFFF)
+ return -EINVAL;
+
+ mutex_lock(&priv->lock);
/* Range Limit and Modulo-N count modes use preset value as ceiling */
switch (priv->count_mode[count->id]) {
case 1:
case 3:
- return quad8_count_preset_write(counter, count, private, buf,
- len);
+ quad8_preset_register_set(priv, count->id, ceiling);
+ break;
}
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -1137,6 +1256,8 @@ static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
/* Preset enable is active low in Input/Output Control register */
preset_enable = !preset_enable;
+ mutex_lock(&priv->lock);
+
priv->preset_enable[count->id] = preset_enable;
ior_cfg = priv->ab_enable[count->id] | (unsigned int)preset_enable << 1;
@@ -1144,6 +1265,8 @@ static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
/* Load I/O control configuration to Input / Output Control Register */
outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
+ mutex_unlock(&priv->lock);
+
return len;
}
@@ -1429,6 +1552,9 @@ static int quad8_probe(struct device *dev, unsigned int id)
quad8iio->counter.priv = quad8iio;
quad8iio->base = base[id];
+ /* Initialize mutex */
+ mutex_init(&quad8iio->lock);
+
/* Reset all counters and disable interrupt function */
outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
/* Set initial configuration for all counters */
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index 02981f3d1794..08ba1a8f05eb 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -125,10 +125,10 @@
#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */
/* ID Register Bit Designations (AD7192_REG_ID) */
-#define ID_AD7190 0x4
-#define ID_AD7192 0x0
-#define ID_AD7193 0x2
-#define ID_AD7195 0x6
+#define CHIPID_AD7190 0x4
+#define CHIPID_AD7192 0x0
+#define CHIPID_AD7193 0x2
+#define CHIPID_AD7195 0x6
#define AD7192_ID_MASK 0x0F
/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
@@ -161,7 +161,20 @@ enum {
AD7192_SYSCALIB_FULL_SCALE,
};
+enum {
+ ID_AD7190,
+ ID_AD7192,
+ ID_AD7193,
+ ID_AD7195,
+};
+
+struct ad7192_chip_info {
+ unsigned int chip_id;
+ const char *name;
+};
+
struct ad7192_state {
+ const struct ad7192_chip_info *chip_info;
struct regulator *avdd;
struct regulator *dvdd;
struct clk *mclk;
@@ -172,7 +185,6 @@ struct ad7192_state {
u32 conf;
u32 scale_avail[8][2];
u8 gpocon;
- u8 devid;
u8 clock_sel;
struct mutex lock; /* protect sensor state */
u8 syscalib_mode[8];
@@ -348,7 +360,7 @@ static int ad7192_setup(struct ad7192_state *st, struct device_node *np)
id &= AD7192_ID_MASK;
- if (id != st->devid)
+ if (id != st->chip_info->chip_id)
dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n",
id);
@@ -363,7 +375,7 @@ static int ad7192_setup(struct ad7192_state *st, struct device_node *np)
st->mode |= AD7192_MODE_REJ60;
refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable");
- if (refin2_en && st->devid != ID_AD7195)
+ if (refin2_en && st->chip_info->chip_id != CHIPID_AD7195)
st->conf |= AD7192_CONF_REFSEL;
st->conf &= ~AD7192_CONF_CHOP;
@@ -859,12 +871,31 @@ static const struct iio_chan_spec ad7193_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(14),
};
+static const struct ad7192_chip_info ad7192_chip_info_tbl[] = {
+ [ID_AD7190] = {
+ .chip_id = CHIPID_AD7190,
+ .name = "ad7190",
+ },
+ [ID_AD7192] = {
+ .chip_id = CHIPID_AD7192,
+ .name = "ad7192",
+ },
+ [ID_AD7193] = {
+ .chip_id = CHIPID_AD7193,
+ .name = "ad7193",
+ },
+ [ID_AD7195] = {
+ .chip_id = CHIPID_AD7195,
+ .name = "ad7195",
+ },
+};
+
static int ad7192_channels_config(struct iio_dev *indio_dev)
{
struct ad7192_state *st = iio_priv(indio_dev);
- switch (st->devid) {
- case ID_AD7193:
+ switch (st->chip_info->chip_id) {
+ case CHIPID_AD7193:
indio_dev->channels = ad7193_channels;
indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
break;
@@ -878,10 +909,10 @@ static int ad7192_channels_config(struct iio_dev *indio_dev)
}
static const struct of_device_id ad7192_of_match[] = {
- { .compatible = "adi,ad7190", .data = (void *)ID_AD7190 },
- { .compatible = "adi,ad7192", .data = (void *)ID_AD7192 },
- { .compatible = "adi,ad7193", .data = (void *)ID_AD7193 },
- { .compatible = "adi,ad7195", .data = (void *)ID_AD7195 },
+ { .compatible = "adi,ad7190", .data = &ad7192_chip_info_tbl[ID_AD7190] },
+ { .compatible = "adi,ad7192", .data = &ad7192_chip_info_tbl[ID_AD7192] },
+ { .compatible = "adi,ad7193", .data = &ad7192_chip_info_tbl[ID_AD7193] },
+ { .compatible = "adi,ad7195", .data = &ad7192_chip_info_tbl[ID_AD7195] },
{}
};
MODULE_DEVICE_TABLE(of, ad7192_of_match);
@@ -938,16 +969,16 @@ static int ad7192_probe(struct spi_device *spi)
}
spi_set_drvdata(spi, indio_dev);
- st->devid = (unsigned long)of_device_get_match_data(&spi->dev);
+ st->chip_info = of_device_get_match_data(&spi->dev);
indio_dev->dev.parent = &spi->dev;
- indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->name = st->chip_info->name;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = ad7192_channels_config(indio_dev);
if (ret < 0)
goto error_disable_dvdd;
- if (st->devid == ID_AD7195)
+ if (st->chip_info->chip_id == CHIPID_AD7195)
indio_dev->info = &ad7195_info;
else
indio_dev->info = &ad7192_info;
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index b747db97f78a..e5691e330323 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -542,7 +542,7 @@ static const struct iio_info ad7797_info = {
.read_raw = &ad7793_read_raw,
.write_raw = &ad7793_write_raw,
.write_raw_get_fmt = &ad7793_write_raw_get_fmt,
- .attrs = &ad7793_attribute_group,
+ .attrs = &ad7797_attribute_group,
.validate_trigger = ad_sd_validate_trigger,
};
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 80c3f963527b..ae622ee6d08c 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1418,8 +1418,30 @@ static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
static void stm32_adc_dma_buffer_done(void *data)
{
struct iio_dev *indio_dev = data;
+ struct stm32_adc *adc = iio_priv(indio_dev);
+ int residue = stm32_adc_dma_residue(adc);
+
+ /*
+ * In DMA mode the trigger services of IIO are not used
+ * (e.g. no call to iio_trigger_poll).
+ * Calling irq handler associated to the hardware trigger is not
+ * relevant as the conversions have already been done. Data
+ * transfers are performed directly in DMA callback instead.
+ * This implementation avoids to call trigger irq handler that
+ * may sleep, in an atomic context (DMA irq handler context).
+ */
+ dev_dbg(&indio_dev->dev, "%s bufi=%d\n", __func__, adc->bufi);
- iio_trigger_poll_chained(indio_dev->trig);
+ while (residue >= indio_dev->scan_bytes) {
+ u16 *buffer = (u16 *)&adc->rx_buf[adc->bufi];
+
+ iio_push_to_buffers(indio_dev, buffer);
+
+ residue -= indio_dev->scan_bytes;
+ adc->bufi += indio_dev->scan_bytes;
+ if (adc->bufi >= adc->rx_buf_sz)
+ adc->bufi = 0;
+ }
}
static int stm32_adc_dma_start(struct iio_dev *indio_dev)
@@ -1845,6 +1867,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
struct device *dev = &pdev->dev;
+ irqreturn_t (*handler)(int irq, void *p) = NULL;
struct stm32_adc *adc;
int ret;
@@ -1911,9 +1934,11 @@ static int stm32_adc_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
+ if (!adc->dma_chan)
+ handler = &stm32_adc_trigger_handler;
+
ret = iio_triggered_buffer_setup(indio_dev,
- &iio_pollfunc_store_time,
- &stm32_adc_trigger_handler,
+ &iio_pollfunc_store_time, handler,
&stm32_adc_buffer_setup_ops);
if (ret) {
dev_err(&pdev->dev, "buffer setup failed\n");
diff --git a/drivers/iio/adc/ti-ads8344.c b/drivers/iio/adc/ti-ads8344.c
index 9a460807d46d..abe4b56c847c 100644
--- a/drivers/iio/adc/ti-ads8344.c
+++ b/drivers/iio/adc/ti-ads8344.c
@@ -29,7 +29,7 @@ struct ads8344 {
struct mutex lock;
u8 tx_buf ____cacheline_aligned;
- u16 rx_buf;
+ u8 rx_buf[3];
};
#define ADS8344_VOLTAGE_CHANNEL(chan, si) \
@@ -89,11 +89,11 @@ static int ads8344_adc_conversion(struct ads8344 *adc, int channel,
udelay(9);
- ret = spi_read(spi, &adc->rx_buf, 2);
+ ret = spi_read(spi, adc->rx_buf, sizeof(adc->rx_buf));
if (ret)
return ret;
- return adc->rx_buf;
+ return adc->rx_buf[0] << 9 | adc->rx_buf[1] << 1 | adc->rx_buf[2] >> 7;
}
static int ads8344_read_raw(struct iio_dev *iio,
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index ec227b358cd6..6fd06e4eff73 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -102,6 +102,16 @@ static const unsigned int XADC_ZYNQ_UNMASK_TIMEOUT = 500;
#define XADC_FLAGS_BUFFERED BIT(0)
+/*
+ * The XADC hardware supports a samplerate of up to 1MSPS. Unfortunately it does
+ * not have a hardware FIFO. Which means an interrupt is generated for each
+ * conversion sequence. At 1MSPS sample rate the CPU in ZYNQ7000 is completely
+ * overloaded by the interrupts that it soft-lockups. For this reason the driver
+ * limits the maximum samplerate 150kSPS. At this rate the CPU is fairly busy,
+ * but still responsive.
+ */
+#define XADC_MAX_SAMPLERATE 150000
+
static void xadc_write_reg(struct xadc *xadc, unsigned int reg,
uint32_t val)
{
@@ -674,7 +684,7 @@ static int xadc_trigger_set_state(struct iio_trigger *trigger, bool state)
spin_lock_irqsave(&xadc->lock, flags);
xadc_read_reg(xadc, XADC_AXI_REG_IPIER, &val);
- xadc_write_reg(xadc, XADC_AXI_REG_IPISR, val & XADC_AXI_INT_EOS);
+ xadc_write_reg(xadc, XADC_AXI_REG_IPISR, XADC_AXI_INT_EOS);
if (state)
val |= XADC_AXI_INT_EOS;
else
@@ -722,13 +732,14 @@ static int xadc_power_adc_b(struct xadc *xadc, unsigned int seq_mode)
{
uint16_t val;
+ /* Powerdown the ADC-B when it is not needed. */
switch (seq_mode) {
case XADC_CONF1_SEQ_SIMULTANEOUS:
case XADC_CONF1_SEQ_INDEPENDENT:
- val = XADC_CONF2_PD_ADC_B;
+ val = 0;
break;
default:
- val = 0;
+ val = XADC_CONF2_PD_ADC_B;
break;
}
@@ -797,6 +808,16 @@ static int xadc_preenable(struct iio_dev *indio_dev)
if (ret)
goto err;
+ /*
+ * In simultaneous mode the upper and lower aux channels are samples at
+ * the same time. In this mode the upper 8 bits in the sequencer
+ * register are don't care and the lower 8 bits control two channels
+ * each. As such we must set the bit if either the channel in the lower
+ * group or the upper group is enabled.
+ */
+ if (seq_mode == XADC_CONF1_SEQ_SIMULTANEOUS)
+ scan_mask = ((scan_mask >> 8) | scan_mask) & 0xff0000;
+
ret = xadc_write_adc_reg(xadc, XADC_REG_SEQ(1), scan_mask >> 16);
if (ret)
goto err;
@@ -823,11 +844,27 @@ static const struct iio_buffer_setup_ops xadc_buffer_ops = {
.postdisable = &xadc_postdisable,
};
+static int xadc_read_samplerate(struct xadc *xadc)
+{
+ unsigned int div;
+ uint16_t val16;
+ int ret;
+
+ ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
+ if (ret)
+ return ret;
+
+ div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
+ if (div < 2)
+ div = 2;
+
+ return xadc_get_dclk_rate(xadc) / div / 26;
+}
+
static int xadc_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long info)
{
struct xadc *xadc = iio_priv(indio_dev);
- unsigned int div;
uint16_t val16;
int ret;
@@ -880,41 +917,31 @@ static int xadc_read_raw(struct iio_dev *indio_dev,
*val = -((273150 << 12) / 503975);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
- ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
- if (ret)
+ ret = xadc_read_samplerate(xadc);
+ if (ret < 0)
return ret;
- div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
- if (div < 2)
- div = 2;
-
- *val = xadc_get_dclk_rate(xadc) / div / 26;
-
+ *val = ret;
return IIO_VAL_INT;
default:
return -EINVAL;
}
}
-static int xadc_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan, int val, int val2, long info)
+static int xadc_write_samplerate(struct xadc *xadc, int val)
{
- struct xadc *xadc = iio_priv(indio_dev);
unsigned long clk_rate = xadc_get_dclk_rate(xadc);
unsigned int div;
if (!clk_rate)
return -EINVAL;
- if (info != IIO_CHAN_INFO_SAMP_FREQ)
- return -EINVAL;
-
if (val <= 0)
return -EINVAL;
/* Max. 150 kSPS */
- if (val > 150000)
- val = 150000;
+ if (val > XADC_MAX_SAMPLERATE)
+ val = XADC_MAX_SAMPLERATE;
val *= 26;
@@ -927,7 +954,7 @@ static int xadc_write_raw(struct iio_dev *indio_dev,
* limit.
*/
div = clk_rate / val;
- if (clk_rate / div / 26 > 150000)
+ if (clk_rate / div / 26 > XADC_MAX_SAMPLERATE)
div++;
if (div < 2)
div = 2;
@@ -938,6 +965,17 @@ static int xadc_write_raw(struct iio_dev *indio_dev,
div << XADC_CONF2_DIV_OFFSET);
}
+static int xadc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long info)
+{
+ struct xadc *xadc = iio_priv(indio_dev);
+
+ if (info != IIO_CHAN_INFO_SAMP_FREQ)
+ return -EINVAL;
+
+ return xadc_write_samplerate(xadc, val);
+}
+
static const struct iio_event_spec xadc_temp_events[] = {
{
.type = IIO_EV_TYPE_THRESH,
@@ -1223,6 +1261,21 @@ static int xadc_probe(struct platform_device *pdev)
if (ret)
goto err_free_samplerate_trigger;
+ /*
+ * Make sure not to exceed the maximum samplerate since otherwise the
+ * resulting interrupt storm will soft-lock the system.
+ */
+ if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
+ ret = xadc_read_samplerate(xadc);
+ if (ret < 0)
+ goto err_free_samplerate_trigger;
+ if (ret > XADC_MAX_SAMPLERATE) {
+ ret = xadc_write_samplerate(xadc, XADC_MAX_SAMPLERATE);
+ if (ret < 0)
+ goto err_free_samplerate_trigger;
+ }
+ }
+
ret = request_irq(xadc->irq, xadc->ops->interrupt_handler, 0,
dev_name(&pdev->dev), indio_dev);
if (ret)
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 0e35ff06f9af..13bdfbbf5f71 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -79,7 +79,7 @@ int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
- if (!sdata->sensor_settings->odr.addr)
+ if (!sdata->sensor_settings->odr.mask)
return 0;
err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);
diff --git a/drivers/iio/dac/ad5770r.c b/drivers/iio/dac/ad5770r.c
index a98ea76732e7..2d7623b9b2c0 100644
--- a/drivers/iio/dac/ad5770r.c
+++ b/drivers/iio/dac/ad5770r.c
@@ -525,7 +525,7 @@ static int ad5770r_channel_config(struct ad5770r_state *st)
ret = fwnode_property_read_u32(child, "num", &num);
if (ret)
return ret;
- if (num > AD5770R_MAX_CHANNELS)
+ if (num >= AD5770R_MAX_CHANNELS)
return -EINVAL;
ret = fwnode_property_read_u32_array(child,
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 7cb9ff3d3e94..0b8d2f7a0165 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -1617,6 +1617,10 @@ static int __maybe_unused inv_mpu_resume(struct device *dev)
if (result)
goto out_unlock;
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
result = inv_mpu6050_switch_engine(st, true, st->suspended_sensors);
if (result)
goto out_unlock;
@@ -1638,13 +1642,18 @@ static int __maybe_unused inv_mpu_suspend(struct device *dev)
mutex_lock(&st->lock);
+ st->suspended_sensors = 0;
+ if (pm_runtime_suspended(dev)) {
+ result = 0;
+ goto out_unlock;
+ }
+
if (iio_buffer_enabled(indio_dev)) {
result = inv_mpu6050_prepare_fifo(st, false);
if (result)
goto out_unlock;
}
- st->suspended_sensors = 0;
if (st->chip_config.accl_en)
st->suspended_sensors |= INV_MPU6050_SENSOR_ACCL;
if (st->chip_config.gyro_en)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index f2113a63721a..41cb20cb3809 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -337,6 +337,7 @@ enum st_lsm6dsx_fifo_mode {
* @gain: Configured sensor sensitivity.
* @odr: Output data rate of the sensor [Hz].
* @watermark: Sensor watermark level.
+ * @decimator: Sensor decimation factor.
* @sip: Number of samples in a given pattern.
* @ts_ref: Sensor timestamp reference for hw one.
* @ext_info: Sensor settings if it is connected to i2c controller
@@ -350,11 +351,13 @@ struct st_lsm6dsx_sensor {
u32 odr;
u16 watermark;
+ u8 decimator;
u8 sip;
s64 ts_ref;
struct {
const struct st_lsm6dsx_ext_dev_settings *settings;
+ u32 slv_odr;
u8 addr;
} ext_info;
};
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index bb899345f2bb..afd00daeefb2 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -93,6 +93,7 @@ st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr)
break;
}
+ sensor->decimator = decimator;
return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
}
@@ -337,7 +338,7 @@ static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr,
int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
{
struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor, *ext_sensor = NULL;
- int err, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
+ int err, sip, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
u8 gyro_buff[ST_LSM6DSX_IIO_BUFF_SIZE];
@@ -399,19 +400,20 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
acc_sip = acc_sensor->sip;
ts_sip = hw->ts_sip;
offset = 0;
+ sip = 0;
while (acc_sip > 0 || gyro_sip > 0 || ext_sip > 0) {
- if (gyro_sip > 0) {
+ if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
memcpy(gyro_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
- if (acc_sip > 0) {
+ if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
memcpy(acc_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
- if (ext_sip > 0) {
+ if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
memcpy(ext_buff, &hw->buff[offset],
ST_LSM6DSX_SAMPLE_SIZE);
offset += ST_LSM6DSX_SAMPLE_SIZE;
@@ -441,18 +443,25 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
offset += ST_LSM6DSX_SAMPLE_SIZE;
}
- if (gyro_sip-- > 0)
+ if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_GYRO],
gyro_buff, gyro_sensor->ts_ref + ts);
- if (acc_sip-- > 0)
+ gyro_sip--;
+ }
+ if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_ACC],
acc_buff, acc_sensor->ts_ref + ts);
- if (ext_sip-- > 0)
+ acc_sip--;
+ }
+ if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
iio_push_to_buffers_with_timestamp(
hw->iio_devs[ST_LSM6DSX_ID_EXT0],
ext_buff, ext_sensor->ts_ref + ts);
+ ext_sip--;
+ }
+ sip++;
}
}
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 84d219ae6aee..4426524b59f2 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -2036,11 +2036,21 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
return 0;
}
-static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
+static int st_lsm6dsx_reset_device(struct st_lsm6dsx_hw *hw)
{
const struct st_lsm6dsx_reg *reg;
int err;
+ /*
+ * flush hw FIFO before device reset in order to avoid
+ * possible races on interrupt line 1. If the first interrupt
+ * line is asserted during hw reset the device will work in
+ * I3C-only mode (if it is supported)
+ */
+ err = st_lsm6dsx_flush_fifo(hw);
+ if (err < 0 && err != -ENOTSUPP)
+ return err;
+
/* device sw reset */
reg = &hw->settings->reset;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
@@ -2059,6 +2069,18 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
msleep(50);
+ return 0;
+}
+
+static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
+{
+ const struct st_lsm6dsx_reg *reg;
+ int err;
+
+ err = st_lsm6dsx_reset_device(hw);
+ if (err < 0)
+ return err;
+
/* enable Block Data Update */
reg = &hw->settings->bdu;
err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index 95ddd19d1aa7..64ef07a30726 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -421,7 +421,8 @@ int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable)
settings = sensor->ext_info.settings;
if (enable) {
- err = st_lsm6dsx_shub_set_odr(sensor, sensor->odr);
+ err = st_lsm6dsx_shub_set_odr(sensor,
+ sensor->ext_info.slv_odr);
if (err < 0)
return err;
} else {
@@ -459,7 +460,7 @@ st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor,
if (err < 0)
return err;
- delay = 1000000000 / sensor->odr;
+ delay = 1000000000 / sensor->ext_info.slv_odr;
usleep_range(delay, 2 * delay);
len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3);
@@ -500,8 +501,8 @@ st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
iio_device_release_direct_mode(iio_dev);
break;
case IIO_CHAN_INFO_SAMP_FREQ:
- *val = sensor->odr / 1000;
- *val2 = (sensor->odr % 1000) * 1000;
+ *val = sensor->ext_info.slv_odr / 1000;
+ *val2 = (sensor->ext_info.slv_odr % 1000) * 1000;
ret = IIO_VAL_INT_PLUS_MICRO;
break;
case IIO_CHAN_INFO_SCALE:
@@ -535,8 +536,20 @@ st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
val = val * 1000 + val2 / 1000;
err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data);
- if (!err)
- sensor->odr = val;
+ if (!err) {
+ struct st_lsm6dsx_hw *hw = sensor->hw;
+ struct st_lsm6dsx_sensor *ref_sensor;
+ u8 odr_val;
+ int odr;
+
+ ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+ odr = st_lsm6dsx_check_odr(ref_sensor, val, &odr_val);
+ if (odr < 0)
+ return odr;
+
+ sensor->ext_info.slv_odr = val;
+ sensor->odr = odr;
+ }
break;
}
default:
@@ -613,6 +626,7 @@ st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
const struct st_lsm6dsx_ext_dev_settings *info,
u8 i2c_addr, const char *name)
{
+ enum st_lsm6dsx_sensor_id ref_id = ST_LSM6DSX_ID_ACC;
struct iio_chan_spec *ext_channels;
struct st_lsm6dsx_sensor *sensor;
struct iio_dev *iio_dev;
@@ -628,7 +642,8 @@ st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
sensor = iio_priv(iio_dev);
sensor->id = id;
sensor->hw = hw;
- sensor->odr = info->odr_table.odr_avl[0].milli_hz;
+ sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz;
+ sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz;
sensor->gain = info->fs_table.fs_avl[0].gain;
sensor->ext_info.settings = info;
sensor->ext_info.addr = i2c_addr;
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 2352c426bfb5..24f7bbff4938 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -915,14 +915,11 @@ static ssize_t iio_write_channel_info(struct device *dev,
return -EINVAL;
integer = ch;
} else {
- ret = iio_str_to_fixpoint(buf, fract_mult, &integer, &fract);
+ ret = __iio_str_to_fixpoint(buf, fract_mult, &integer, &fract,
+ scale_db);
if (ret)
return ret;
}
- ret = __iio_str_to_fixpoint(buf, fract_mult, &integer, &fract,
- scale_db);
- if (ret)
- return ret;
ret = indio_dev->info->write_raw(indio_dev, this_attr->c,
integer, fract, this_attr->address);
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index 08d1bbbebf2d..e84b4fb493d6 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -2725,8 +2725,10 @@ static int comedi_open(struct inode *inode, struct file *file)
}
cfp = kzalloc(sizeof(*cfp), GFP_KERNEL);
- if (!cfp)
+ if (!cfp) {
+ comedi_dev_put(dev);
return -ENOMEM;
+ }
cfp->dev = dev;
diff --git a/drivers/staging/comedi/drivers/dt2815.c b/drivers/staging/comedi/drivers/dt2815.c
index 83026ba63d1c..78a7c1b3448a 100644
--- a/drivers/staging/comedi/drivers/dt2815.c
+++ b/drivers/staging/comedi/drivers/dt2815.c
@@ -92,6 +92,7 @@ static int dt2815_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
int ret;
for (i = 0; i < insn->n; i++) {
+ /* FIXME: lo bit 0 chooses voltage output or current output */
lo = ((data[i] & 0x0f) << 4) | (chan << 1) | 0x01;
hi = (data[i] & 0xff0) >> 4;
@@ -105,6 +106,8 @@ static int dt2815_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
if (ret)
return ret;
+ outb(hi, dev->iobase + DT2815_DATA);
+
devpriv->ao_readback[chan] = data[i];
}
return i;
diff --git a/drivers/staging/gasket/gasket_sysfs.c b/drivers/staging/gasket/gasket_sysfs.c
index a2d67c28f530..5f0e089573a2 100644
--- a/drivers/staging/gasket/gasket_sysfs.c
+++ b/drivers/staging/gasket/gasket_sysfs.c
@@ -228,8 +228,7 @@ int gasket_sysfs_create_entries(struct device *device,
}
mutex_lock(&mapping->mutex);
- for (i = 0; strcmp(attrs[i].attr.attr.name, GASKET_ARRAY_END_MARKER);
- i++) {
+ for (i = 0; attrs[i].attr.attr.name != NULL; i++) {
if (mapping->attribute_count == GASKET_SYSFS_MAX_NODES) {
dev_err(device,
"Maximum number of sysfs nodes reached for device\n");
diff --git a/drivers/staging/gasket/gasket_sysfs.h b/drivers/staging/gasket/gasket_sysfs.h
index 1d0eed66a7f4..ab5aa351d555 100644
--- a/drivers/staging/gasket/gasket_sysfs.h
+++ b/drivers/staging/gasket/gasket_sysfs.h
@@ -30,10 +30,6 @@
*/
#define GASKET_SYSFS_MAX_NODES 196
-/* End markers for sysfs struct arrays. */
-#define GASKET_ARRAY_END_TOKEN GASKET_RESERVED_ARRAY_END
-#define GASKET_ARRAY_END_MARKER __stringify(GASKET_ARRAY_END_TOKEN)
-
/*
* Terminator struct for a gasket_sysfs_attr array. Must be at the end of
* all gasket_sysfs_attribute arrays.
diff --git a/drivers/staging/vt6656/key.c b/drivers/staging/vt6656/key.c
index 41b73f9670e2..ac3b188984d0 100644
--- a/drivers/staging/vt6656/key.c
+++ b/drivers/staging/vt6656/key.c
@@ -83,9 +83,6 @@ static int vnt_set_keymode(struct ieee80211_hw *hw, u8 *mac_addr,
case VNT_KEY_PAIRWISE:
key_mode |= mode;
key_inx = 4;
- /* Don't save entry for pairwise key for station mode */
- if (priv->op_mode == NL80211_IFTYPE_STATION)
- clear_bit(entry, &priv->key_entry_inuse);
break;
default:
return -EINVAL;
@@ -109,7 +106,6 @@ static int vnt_set_keymode(struct ieee80211_hw *hw, u8 *mac_addr,
int vnt_set_keys(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
struct ieee80211_vif *vif, struct ieee80211_key_conf *key)
{
- struct ieee80211_bss_conf *conf = &vif->bss_conf;
struct vnt_private *priv = hw->priv;
u8 *mac_addr = NULL;
u8 key_dec_mode = 0;
@@ -154,16 +150,12 @@ int vnt_set_keys(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
return -EOPNOTSUPP;
}
- if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
vnt_set_keymode(hw, mac_addr, key, VNT_KEY_PAIRWISE,
key_dec_mode, true);
- } else {
- vnt_set_keymode(hw, mac_addr, key, VNT_KEY_DEFAULTKEY,
+ else
+ vnt_set_keymode(hw, mac_addr, key, VNT_KEY_GROUP_ADDRESS,
key_dec_mode, true);
- vnt_set_keymode(hw, (u8 *)conf->bssid, key,
- VNT_KEY_GROUP_ADDRESS, key_dec_mode, true);
- }
-
return 0;
}
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index 8e7269c87ea9..5f78cad3b647 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -625,8 +625,6 @@ static int vnt_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
priv->op_mode = vif->type;
- vnt_set_bss_mode(priv);
-
/* LED blink on TX */
vnt_mac_set_led(priv, LEDSTS_STS, LEDSTS_INTER);
@@ -713,7 +711,6 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw,
priv->basic_rates = conf->basic_rates;
vnt_update_top_rates(priv);
- vnt_set_bss_mode(priv);
dev_dbg(&priv->usb->dev, "basic rates %x\n", conf->basic_rates);
}
@@ -742,11 +739,14 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw,
priv->short_slot_time = false;
vnt_set_short_slot_time(priv);
- vnt_update_ifs(priv);
vnt_set_vga_gain_offset(priv, priv->bb_vga[0]);
vnt_update_pre_ed_threshold(priv, false);
}
+ if (changed & (BSS_CHANGED_BASIC_RATES | BSS_CHANGED_ERP_PREAMBLE |
+ BSS_CHANGED_ERP_SLOT))
+ vnt_set_bss_mode(priv);
+
if (changed & BSS_CHANGED_TXPOWER)
vnt_rf_setpower(priv, priv->current_rate,
conf->chandef.chan->hw_value);
@@ -770,12 +770,15 @@ static void vnt_bss_info_changed(struct ieee80211_hw *hw,
vnt_mac_reg_bits_on(priv, MAC_REG_TFTCTL,
TFTCTL_TSFCNTREN);
- vnt_adjust_tsf(priv, conf->beacon_rate->hw_value,
- conf->sync_tsf, priv->current_tsf);
-
vnt_mac_set_beacon_interval(priv, conf->beacon_int);
vnt_reset_next_tbtt(priv, conf->beacon_int);
+
+ vnt_adjust_tsf(priv, conf->beacon_rate->hw_value,
+ conf->sync_tsf, priv->current_tsf);
+
+ vnt_update_next_tbtt(priv,
+ conf->sync_tsf, conf->beacon_int);
} else {
vnt_clear_current_tsf(priv);
@@ -809,15 +812,11 @@ static void vnt_configure(struct ieee80211_hw *hw,
{
struct vnt_private *priv = hw->priv;
u8 rx_mode = 0;
- int rc;
*total_flags &= FIF_ALLMULTI | FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC;
- rc = vnt_control_in(priv, MESSAGE_TYPE_READ, MAC_REG_RCR,
- MESSAGE_REQUEST_MACREG, sizeof(u8), &rx_mode);
-
- if (!rc)
- rx_mode = RCR_MULTICAST | RCR_BROADCAST;
+ vnt_control_in(priv, MESSAGE_TYPE_READ, MAC_REG_RCR,
+ MESSAGE_REQUEST_MACREG, sizeof(u8), &rx_mode);
dev_dbg(&priv->usb->dev, "rx mode in = %x\n", rx_mode);
@@ -856,8 +855,12 @@ static int vnt_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
case SET_KEY:
return vnt_set_keys(hw, sta, vif, key);
case DISABLE_KEY:
- if (test_bit(key->hw_key_idx, &priv->key_entry_inuse))
+ if (test_bit(key->hw_key_idx, &priv->key_entry_inuse)) {
clear_bit(key->hw_key_idx, &priv->key_entry_inuse);
+
+ vnt_mac_disable_keyentry(priv, key->hw_key_idx);
+ }
+
default:
break;
}
diff --git a/drivers/staging/vt6656/usbpipe.c b/drivers/staging/vt6656/usbpipe.c
index eae211e5860f..91b62c3dff7b 100644
--- a/drivers/staging/vt6656/usbpipe.c
+++ b/drivers/staging/vt6656/usbpipe.c
@@ -207,7 +207,8 @@ static void vnt_int_process_data(struct vnt_private *priv)
priv->wake_up_count =
priv->hw->conf.listen_interval;
- --priv->wake_up_count;
+ if (priv->wake_up_count)
+ --priv->wake_up_count;
/* Turn on wake up to listen next beacon */
if (priv->wake_up_count == 1)
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 17f56a070b20..25c87507a1fa 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -600,7 +600,7 @@ void iio_device_unregister(struct iio_dev *indio_dev);
* 0 on success, negative error number on failure.
*/
#define devm_iio_device_register(dev, indio_dev) \
- __devm_iio_device_register((dev), (indio_dev), THIS_MODULE);
+ __devm_iio_device_register((dev), (indio_dev), THIS_MODULE)
int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev,
struct module *this_mod);
void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev);