summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDave Airlie <airlied@redhat.com>2018-11-16 08:52:14 +1000
committerDave Airlie <airlied@redhat.com>2018-11-16 08:52:14 +1000
commit20325e8a614377967644cf63050095c9f2ea8ab9 (patch)
tree978f172d1d3cf2cb3ed51f2a29ac16518be22a68
parent9826b1138e497dfb48f5cc64a82c219b4d0932da (diff)
parent6e8adf6f4a4fa57dd3bef6b70de96e2b7b311204 (diff)
Merge tag 'drm-intel-fixes-2018-11-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixesdrm-fixes-2018-11-16
- Fix Bugzilla #108712: Fix incorrect EU count report from kernel - Fix to account for scale factor when calculating initial phase on scaled output - Avoid too trigger-happy HPD storm detection and fix a race and an OOPS for MST systems. - Relocation race fix for Gen4/5 - A couple ICL fixes and dependencies for above Fixes:. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181115164709.GA13430@jlahtine-desk.ger.corp.intel.com
-rw-r--r--drivers/gpu/drm/i915/intel_device_info.c2
-rw-r--r--drivers/gpu/drm/i915/intel_display.c45
-rw-r--r--drivers/gpu/drm/i915/intel_dp_mst.c8
-rw-r--r--drivers/gpu/drm/i915/intel_drv.h2
-rw-r--r--drivers/gpu/drm/i915/intel_hotplug.c70
-rw-r--r--drivers/gpu/drm/i915/intel_lrc.c14
-rw-r--r--drivers/gpu/drm/i915/intel_ringbuffer.c38
-rw-r--r--drivers/gpu/drm/i915/intel_runtime_pm.c16
-rw-r--r--drivers/gpu/drm/i915/intel_sprite.c93
9 files changed, 208 insertions, 80 deletions
diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c
index 0ef0c6448d53..01fa98299bae 100644
--- a/drivers/gpu/drm/i915/intel_device_info.c
+++ b/drivers/gpu/drm/i915/intel_device_info.c
@@ -474,7 +474,7 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv)
u8 eu_disabled_mask;
u32 n_disabled;
- if (!(sseu->subslice_mask[ss] & BIT(ss)))
+ if (!(sseu->subslice_mask[s] & BIT(ss)))
/* skip disabled subslice */
continue;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 23d8008a93bb..a54843fdeb2f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4850,8 +4850,31 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
* chroma samples for both of the luma samples, and thus we don't
* actually get the expected MPEG2 chroma siting convention :(
* The same behaviour is observed on pre-SKL platforms as well.
+ *
+ * Theory behind the formula (note that we ignore sub-pixel
+ * source coordinates):
+ * s = source sample position
+ * d = destination sample position
+ *
+ * Downscaling 4:1:
+ * -0.5
+ * | 0.0
+ * | | 1.5 (initial phase)
+ * | | |
+ * v v v
+ * | s | s | s | s |
+ * | d |
+ *
+ * Upscaling 1:4:
+ * -0.5
+ * | -0.375 (initial phase)
+ * | | 0.0
+ * | | |
+ * v v v
+ * | s |
+ * | d | d | d | d |
*/
-u16 skl_scaler_calc_phase(int sub, bool chroma_cosited)
+u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_cosited)
{
int phase = -0x8000;
u16 trip = 0;
@@ -4859,6 +4882,15 @@ u16 skl_scaler_calc_phase(int sub, bool chroma_cosited)
if (chroma_cosited)
phase += (sub - 1) * 0x8000 / sub;
+ phase += scale / (2 * sub);
+
+ /*
+ * Hardware initial phase limited to [-0.5:1.5].
+ * Since the max hardware scale factor is 3.0, we
+ * should never actually excdeed 1.0 here.
+ */
+ WARN_ON(phase < -0x8000 || phase > 0x18000);
+
if (phase < 0)
phase = 0x10000 + phase;
else
@@ -5067,13 +5099,20 @@ static void skylake_pfit_enable(struct intel_crtc *crtc)
if (crtc->config->pch_pfit.enabled) {
u16 uv_rgb_hphase, uv_rgb_vphase;
+ int pfit_w, pfit_h, hscale, vscale;
int id;
if (WARN_ON(crtc->config->scaler_state.scaler_id < 0))
return;
- uv_rgb_hphase = skl_scaler_calc_phase(1, false);
- uv_rgb_vphase = skl_scaler_calc_phase(1, false);
+ pfit_w = (crtc->config->pch_pfit.size >> 16) & 0xFFFF;
+ pfit_h = crtc->config->pch_pfit.size & 0xFFFF;
+
+ hscale = (crtc->config->pipe_src_w << 16) / pfit_w;
+ vscale = (crtc->config->pipe_src_h << 16) / pfit_h;
+
+ uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false);
+ uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false);
id = scaler_state->scaler_id;
I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index 1b00f8ea145b..a911691dbd0f 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -452,6 +452,10 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
if (!intel_connector)
return NULL;
+ intel_connector->get_hw_state = intel_dp_mst_get_hw_state;
+ intel_connector->mst_port = intel_dp;
+ intel_connector->port = port;
+
connector = &intel_connector->base;
ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs,
DRM_MODE_CONNECTOR_DisplayPort);
@@ -462,10 +466,6 @@ static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs);
- intel_connector->get_hw_state = intel_dp_mst_get_hw_state;
- intel_connector->mst_port = intel_dp;
- intel_connector->port = port;
-
for_each_pipe(dev_priv, pipe) {
struct drm_encoder *enc =
&intel_dp->mst_encoders[pipe]->base.base;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index f8dc84b2d2d3..8b298e5f012d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1646,7 +1646,7 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state);
-u16 skl_scaler_calc_phase(int sub, bool chroma_center);
+u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_center);
int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
int skl_max_scale(const struct intel_crtc_state *crtc_state,
u32 pixel_format);
diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c
index 648a13c6043c..9a8018130237 100644
--- a/drivers/gpu/drm/i915/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/intel_hotplug.c
@@ -228,7 +228,9 @@ static void intel_hpd_irq_storm_reenable_work(struct work_struct *work)
drm_for_each_connector_iter(connector, &conn_iter) {
struct intel_connector *intel_connector = to_intel_connector(connector);
- if (intel_connector->encoder->hpd_pin == pin) {
+ /* Don't check MST ports, they don't have pins */
+ if (!intel_connector->mst_port &&
+ intel_connector->encoder->hpd_pin == pin) {
if (connector->polled != intel_connector->polled)
DRM_DEBUG_DRIVER("Reenabling HPD on connector %s\n",
connector->name);
@@ -395,37 +397,54 @@ void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
struct intel_encoder *encoder;
bool storm_detected = false;
bool queue_dig = false, queue_hp = false;
+ u32 long_hpd_pulse_mask = 0;
+ u32 short_hpd_pulse_mask = 0;
+ enum hpd_pin pin;
if (!pin_mask)
return;
spin_lock(&dev_priv->irq_lock);
+
+ /*
+ * Determine whether ->hpd_pulse() exists for each pin, and
+ * whether we have a short or a long pulse. This is needed
+ * as each pin may have up to two encoders (HDMI and DP) and
+ * only the one of them (DP) will have ->hpd_pulse().
+ */
for_each_intel_encoder(&dev_priv->drm, encoder) {
- enum hpd_pin pin = encoder->hpd_pin;
bool has_hpd_pulse = intel_encoder_has_hpd_pulse(encoder);
+ enum port port = encoder->port;
+ bool long_hpd;
+ pin = encoder->hpd_pin;
if (!(BIT(pin) & pin_mask))
continue;
- if (has_hpd_pulse) {
- bool long_hpd = long_mask & BIT(pin);
- enum port port = encoder->port;
+ if (!has_hpd_pulse)
+ continue;
- DRM_DEBUG_DRIVER("digital hpd port %c - %s\n", port_name(port),
- long_hpd ? "long" : "short");
- /*
- * For long HPD pulses we want to have the digital queue happen,
- * but we still want HPD storm detection to function.
- */
- queue_dig = true;
- if (long_hpd) {
- dev_priv->hotplug.long_port_mask |= (1 << port);
- } else {
- /* for short HPD just trigger the digital queue */
- dev_priv->hotplug.short_port_mask |= (1 << port);
- continue;
- }
+ long_hpd = long_mask & BIT(pin);
+
+ DRM_DEBUG_DRIVER("digital hpd port %c - %s\n", port_name(port),
+ long_hpd ? "long" : "short");
+ queue_dig = true;
+
+ if (long_hpd) {
+ long_hpd_pulse_mask |= BIT(pin);
+ dev_priv->hotplug.long_port_mask |= BIT(port);
+ } else {
+ short_hpd_pulse_mask |= BIT(pin);
+ dev_priv->hotplug.short_port_mask |= BIT(port);
}
+ }
+
+ /* Now process each pin just once */
+ for_each_hpd_pin(pin) {
+ bool long_hpd;
+
+ if (!(BIT(pin) & pin_mask))
+ continue;
if (dev_priv->hotplug.stats[pin].state == HPD_DISABLED) {
/*
@@ -442,11 +461,22 @@ void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
if (dev_priv->hotplug.stats[pin].state != HPD_ENABLED)
continue;
- if (!has_hpd_pulse) {
+ /*
+ * Delegate to ->hpd_pulse() if one of the encoders for this
+ * pin has it, otherwise let the hotplug_work deal with this
+ * pin directly.
+ */
+ if (((short_hpd_pulse_mask | long_hpd_pulse_mask) & BIT(pin))) {
+ long_hpd = long_hpd_pulse_mask & BIT(pin);
+ } else {
dev_priv->hotplug.event_bits |= BIT(pin);
+ long_hpd = true;
queue_hp = true;
}
+ if (!long_hpd)
+ continue;
+
if (intel_hpd_irq_storm_detect(dev_priv, pin)) {
dev_priv->hotplug.event_bits &= ~BIT(pin);
storm_detected = true;
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 43957bb37a42..37c94a54efcb 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -424,7 +424,8 @@ static u64 execlists_update_context(struct i915_request *rq)
reg_state[CTX_RING_TAIL+1] = intel_ring_set_tail(rq->ring, rq->tail);
- /* True 32b PPGTT with dynamic page allocation: update PDP
+ /*
+ * True 32b PPGTT with dynamic page allocation: update PDP
* registers and point the unallocated PDPs to scratch page.
* PML4 is allocated during ppgtt init, so this is not needed
* in 48-bit mode.
@@ -432,6 +433,17 @@ static u64 execlists_update_context(struct i915_request *rq)
if (ppgtt && !i915_vm_is_48bit(&ppgtt->vm))
execlists_update_context_pdps(ppgtt, reg_state);
+ /*
+ * Make sure the context image is complete before we submit it to HW.
+ *
+ * Ostensibly, writes (including the WCB) should be flushed prior to
+ * an uncached write such as our mmio register access, the empirical
+ * evidence (esp. on Braswell) suggests that the WC write into memory
+ * may not be visible to the HW prior to the completion of the UC
+ * register write and that we may begin execution from the context
+ * before its image is complete leading to invalid PD chasing.
+ */
+ wmb();
return ce->lrc_desc;
}
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index d0ef50bf930a..187bb0ceb4ac 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -91,6 +91,7 @@ static int
gen4_render_ring_flush(struct i915_request *rq, u32 mode)
{
u32 cmd, *cs;
+ int i;
/*
* read/write caches:
@@ -127,12 +128,45 @@ gen4_render_ring_flush(struct i915_request *rq, u32 mode)
cmd |= MI_INVALIDATE_ISP;
}
- cs = intel_ring_begin(rq, 2);
+ i = 2;
+ if (mode & EMIT_INVALIDATE)
+ i += 20;
+
+ cs = intel_ring_begin(rq, i);
if (IS_ERR(cs))
return PTR_ERR(cs);
*cs++ = cmd;
- *cs++ = MI_NOOP;
+
+ /*
+ * A random delay to let the CS invalidate take effect? Without this
+ * delay, the GPU relocation path fails as the CS does not see
+ * the updated contents. Just as important, if we apply the flushes
+ * to the EMIT_FLUSH branch (i.e. immediately after the relocation
+ * write and before the invalidate on the next batch), the relocations
+ * still fail. This implies that is a delay following invalidation
+ * that is required to reset the caches as opposed to a delay to
+ * ensure the memory is written.
+ */
+ if (mode & EMIT_INVALIDATE) {
+ *cs++ = GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE;
+ *cs++ = i915_ggtt_offset(rq->engine->scratch) |
+ PIPE_CONTROL_GLOBAL_GTT;
+ *cs++ = 0;
+ *cs++ = 0;
+
+ for (i = 0; i < 12; i++)
+ *cs++ = MI_FLUSH;
+
+ *cs++ = GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE;
+ *cs++ = i915_ggtt_offset(rq->engine->scratch) |
+ PIPE_CONTROL_GLOBAL_GTT;
+ *cs++ = 0;
+ *cs++ = 0;
+ }
+
+ *cs++ = cmd;
+
intel_ring_advance(rq, cs);
return 0;
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 0fdabce647ab..44e4491a4918 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -2749,6 +2749,12 @@ static const struct i915_power_well_desc icl_power_wells[] = {
},
},
{
+ .name = "DC off",
+ .domains = ICL_DISPLAY_DC_OFF_POWER_DOMAINS,
+ .ops = &gen9_dc_off_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ },
+ {
.name = "power well 2",
.domains = ICL_PW_2_POWER_DOMAINS,
.ops = &hsw_power_well_ops,
@@ -2760,12 +2766,6 @@ static const struct i915_power_well_desc icl_power_wells[] = {
},
},
{
- .name = "DC off",
- .domains = ICL_DISPLAY_DC_OFF_POWER_DOMAINS,
- .ops = &gen9_dc_off_power_well_ops,
- .id = DISP_PW_ID_NONE,
- },
- {
.name = "power well 3",
.domains = ICL_PW_3_POWER_DOMAINS,
.ops = &hsw_power_well_ops,
@@ -3176,8 +3176,7 @@ static u8 intel_dbuf_max_slices(struct drm_i915_private *dev_priv)
void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
u8 req_slices)
{
- u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices;
- u32 val;
+ const u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices;
bool ret;
if (req_slices > intel_dbuf_max_slices(dev_priv)) {
@@ -3188,7 +3187,6 @@ void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
if (req_slices == hw_enabled_slices || req_slices == 0)
return;
- val = I915_READ(DBUF_CTL_S2);
if (req_slices > hw_enabled_slices)
ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, true);
else
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 5fd2f7bf3927..d3090a7537bb 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -302,13 +302,65 @@ skl_plane_max_stride(struct intel_plane *plane,
return min(8192 * cpp, 32768);
}
+static void
+skl_program_scaler(struct intel_plane *plane,
+ const struct intel_crtc_state *crtc_state,
+ const struct intel_plane_state *plane_state)
+{
+ struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
+ enum pipe pipe = plane->pipe;
+ int scaler_id = plane_state->scaler_id;
+ const struct intel_scaler *scaler =
+ &crtc_state->scaler_state.scalers[scaler_id];
+ int crtc_x = plane_state->base.dst.x1;
+ int crtc_y = plane_state->base.dst.y1;
+ uint32_t crtc_w = drm_rect_width(&plane_state->base.dst);
+ uint32_t crtc_h = drm_rect_height(&plane_state->base.dst);
+ u16 y_hphase, uv_rgb_hphase;
+ u16 y_vphase, uv_rgb_vphase;
+ int hscale, vscale;
+
+ hscale = drm_rect_calc_hscale(&plane_state->base.src,
+ &plane_state->base.dst,
+ 0, INT_MAX);
+ vscale = drm_rect_calc_vscale(&plane_state->base.src,
+ &plane_state->base.dst,
+ 0, INT_MAX);
+
+ /* TODO: handle sub-pixel coordinates */
+ if (plane_state->base.fb->format->format == DRM_FORMAT_NV12) {
+ y_hphase = skl_scaler_calc_phase(1, hscale, false);
+ y_vphase = skl_scaler_calc_phase(1, vscale, false);
+
+ /* MPEG2 chroma siting convention */
+ uv_rgb_hphase = skl_scaler_calc_phase(2, hscale, true);
+ uv_rgb_vphase = skl_scaler_calc_phase(2, vscale, false);
+ } else {
+ /* not used */
+ y_hphase = 0;
+ y_vphase = 0;
+
+ uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false);
+ uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false);
+ }
+
+ I915_WRITE_FW(SKL_PS_CTRL(pipe, scaler_id),
+ PS_SCALER_EN | PS_PLANE_SEL(plane->id) | scaler->mode);
+ I915_WRITE_FW(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
+ I915_WRITE_FW(SKL_PS_VPHASE(pipe, scaler_id),
+ PS_Y_PHASE(y_vphase) | PS_UV_RGB_PHASE(uv_rgb_vphase));
+ I915_WRITE_FW(SKL_PS_HPHASE(pipe, scaler_id),
+ PS_Y_PHASE(y_hphase) | PS_UV_RGB_PHASE(uv_rgb_hphase));
+ I915_WRITE_FW(SKL_PS_WIN_POS(pipe, scaler_id), (crtc_x << 16) | crtc_y);
+ I915_WRITE_FW(SKL_PS_WIN_SZ(pipe, scaler_id), (crtc_w << 16) | crtc_h);
+}
+
void
skl_update_plane(struct intel_plane *plane,
const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state)
{
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
- const struct drm_framebuffer *fb = plane_state->base.fb;
enum plane_id plane_id = plane->id;
enum pipe pipe = plane->pipe;
u32 plane_ctl = plane_state->ctl;
@@ -318,8 +370,6 @@ skl_update_plane(struct intel_plane *plane,
u32 aux_stride = skl_plane_stride(plane_state, 1);
int crtc_x = plane_state->base.dst.x1;
int crtc_y = plane_state->base.dst.y1;
- uint32_t crtc_w = drm_rect_width(&plane_state->base.dst);
- uint32_t crtc_h = drm_rect_height(&plane_state->base.dst);
uint32_t x = plane_state->color_plane[0].x;
uint32_t y = plane_state->color_plane[0].y;
uint32_t src_w = drm_rect_width(&plane_state->base.src) >> 16;
@@ -329,8 +379,6 @@ skl_update_plane(struct intel_plane *plane,
/* Sizes are 0 based */
src_w--;
src_h--;
- crtc_w--;
- crtc_h--;
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
@@ -353,41 +401,8 @@ skl_update_plane(struct intel_plane *plane,
(plane_state->color_plane[1].y << 16) |
plane_state->color_plane[1].x);
- /* program plane scaler */
if (plane_state->scaler_id >= 0) {
- int scaler_id = plane_state->scaler_id;
- const struct intel_scaler *scaler =
- &crtc_state->scaler_state.scalers[scaler_id];
- u16 y_hphase, uv_rgb_hphase;
- u16 y_vphase, uv_rgb_vphase;
-
- /* TODO: handle sub-pixel coordinates */
- if (fb->format->format == DRM_FORMAT_NV12) {
- y_hphase = skl_scaler_calc_phase(1, false);
- y_vphase = skl_scaler_calc_phase(1, false);
-
- /* MPEG2 chroma siting convention */
- uv_rgb_hphase = skl_scaler_calc_phase(2, true);
- uv_rgb_vphase = skl_scaler_calc_phase(2, false);
- } else {
- /* not used */
- y_hphase = 0;
- y_vphase = 0;
-
- uv_rgb_hphase = skl_scaler_calc_phase(1, false);
- uv_rgb_vphase = skl_scaler_calc_phase(1, false);
- }
-
- I915_WRITE_FW(SKL_PS_CTRL(pipe, scaler_id),
- PS_SCALER_EN | PS_PLANE_SEL(plane_id) | scaler->mode);
- I915_WRITE_FW(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
- I915_WRITE_FW(SKL_PS_VPHASE(pipe, scaler_id),
- PS_Y_PHASE(y_vphase) | PS_UV_RGB_PHASE(uv_rgb_vphase));
- I915_WRITE_FW(SKL_PS_HPHASE(pipe, scaler_id),
- PS_Y_PHASE(y_hphase) | PS_UV_RGB_PHASE(uv_rgb_hphase));
- I915_WRITE_FW(SKL_PS_WIN_POS(pipe, scaler_id), (crtc_x << 16) | crtc_y);
- I915_WRITE_FW(SKL_PS_WIN_SZ(pipe, scaler_id),
- ((crtc_w + 1) << 16)|(crtc_h + 1));
+ skl_program_scaler(plane, crtc_state, plane_state);
I915_WRITE_FW(PLANE_POS(pipe, plane_id), 0);
} else {