diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-01-05 11:30:37 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-01-05 11:30:37 -0800 |
| commit | b23b0ea3708c3dec599966fc856836aca48835b9 (patch) | |
| tree | d911a2ae33b7f546e8408e7a2aef845f65a3d881 | |
| parent | 078a5a4faf64fefaf13478a9091782432cad33fa (diff) | |
| parent | 00f8ccd0c95f4e604297057a5bccec86c0903d14 (diff) | |
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull more ARM SoC updates from Olof Johansson:
"A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a
build fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
Vivante GPU, 256MB RAM, Wifi). This includes some acked
platform-specific drivers (serial, etc). This also include DTs for
two boards with this SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
arm64: defconfig: Re-enable bcm2835-thermal driver
MAINTAINERS: Add entry for RDA Micro SoC architecture
tty: serial: Add RDA8810PL UART driver
ARM: dts: rda8810pl: Add interrupt support for UART
dt-bindings: serial: Document RDA Micro UART
ARM: dts: rda8810pl: Add timer support
ARM: dts: Add devicetree for OrangePi i96 board
ARM: dts: Add devicetree for OrangePi 2G IoT board
ARM: dts: Add devicetree for RDA8810PL SoC
ARM: Prepare RDA8810PL SoC
dt-bindings: arm: Document RDA8810PL and reference boards
dt-bindings: Add RDA Micro vendor prefix
ARM: sti: remove pen_release and boot_lock
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
...
37 files changed, 3084 insertions, 124 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index e7b5c49702bb..b799bcf67d7b 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1028,6 +1028,12 @@ specified address. The serial port must already be setup and configured. Options are not yet supported. + rda,<addr> + Start an early, polled-mode console on a serial port + of an RDA Micro SoC, such as RDA8810PL, at the + specified address. The serial port must already be + setup and configured. Options are not yet supported. + smh Use ARM semihosting calls for early console. s3c2410,<addr> diff --git a/Documentation/devicetree/bindings/arm/rda.txt b/Documentation/devicetree/bindings/arm/rda.txt new file mode 100644 index 000000000000..43c80762c428 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/rda.txt @@ -0,0 +1,17 @@ +RDA Micro platforms device tree bindings +---------------------------------------- + +RDA8810PL SoC +============= + +Required root node properties: + + - compatible : must contain "rda,8810pl" + + +Boards: + +Root node property compatible must contain, depending on board: + + - Orange Pi 2G-IoT: "xunlong,orangepi-2g-iot" + - Orange Pi i96: "xunlong,orangepi-i96" diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt new file mode 100644 index 000000000000..d56615fd343a --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt @@ -0,0 +1,47 @@ +Device tree bindings for ARM PL353 static memory controller + +PL353 static memory controller supports two kinds of memory +interfaces.i.e NAND and SRAM/NOR interfaces. +The actual devices are instantiated from the child nodes of pl353 smc node. + +Required properties: +- compatible : Should be "arm,pl353-smc-r2p1", "arm,primecell". +- reg : Controller registers map and length. +- clock-names : List of input clock names - "memclk", "apb_pclk" + (See clock bindings for details). +- clocks : Clock phandles (see clock bindings for details). +- address-cells : Must be 2. +- size-cells : Must be 1. + +Child nodes: + For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are +supported as child nodes. + +for NAND partition information please refer the below file +Documentation/devicetree/bindings/mtd/partition.txt + +Example: + smcc: memory-controller@e000e000 + compatible = "arm,pl353-smc-r2p1", "arm,primecell"; + clock-names = "memclk", "apb_pclk"; + clocks = <&clkc 11>, <&clkc 44>; + reg = <0xe000e000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0xe1000000 0x1000000 //Nand CS Region + 0x1 0x0 0xe2000000 0x2000000 //SRAM/NOR CS Region + 0x2 0x0 0xe4000000 0x2000000>; //SRAM/NOR CS Region + nand_0: flash@e1000000 { + compatible = "arm,pl353-nand-r2p1" + reg = <0 0 0x1000000>; + (...) + }; + nor0: flash@e2000000 { + compatible = "cfi-flash"; + reg = <1 0 0x2000000>; + }; + nor1: flash@e4000000 { + compatible = "cfi-flash"; + reg = <2 0 0x2000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt new file mode 100644 index 000000000000..a08df97a69e6 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt @@ -0,0 +1,17 @@ +RDA Micro UART + +Required properties: +- compatible : "rda,8810pl-uart" for RDA8810PL SoCs. +- reg : Offset and length of the register set for the device. +- interrupts : Should contain UART interrupt. +- clocks : Phandle to the input clock. + + +Example: + + uart2: serial@20a90000 { + compatible = "rda,8810pl-uart"; + reg = <0x20a90000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 3bbe3b87a1ff..389508584f48 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -325,6 +325,7 @@ ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International raspberrypi Raspberry Pi Foundation raydium Raydium Semiconductor Corp. +rda Unisoc Communications, Inc. realtek Realtek Semiconductor Corp. renesas Renesas Electronics Corporation richtek Richtek Technology Corporation diff --git a/MAINTAINERS b/MAINTAINERS index 99113b9fcdd2..58551782e960 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1540,6 +1540,7 @@ F: arch/arm/mach-imx/ F: arch/arm/mach-mxs/ F: arch/arm/boot/dts/imx* F: arch/arm/configs/imx*_defconfig +F: arch/arm64/boot/dts/freescale/imx* F: drivers/clk/imx/ F: drivers/firmware/imx/ F: drivers/soc/imx/ @@ -1967,6 +1968,20 @@ M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +ARM/RDA MICRO ARCHITECTURE +M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-unisoc@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/boot/dts/rda8810pl-* +F: drivers/clocksource/timer-rda.c +F: drivers/irqchip/irq-rda-intc.c +F: drivers/tty/serial/rda-uart.c +F: Documentation/devicetree/bindings/arm/rda.txt +F: Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt +F: Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt +F: Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt + ARM/REALTEK ARCHITECTURE M: Andreas Färber <afaerber@suse.de> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c1227757817b..664e918e2624 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -787,6 +787,8 @@ source "arch/arm/plat-pxa/Kconfig" source "arch/arm/mach-qcom/Kconfig" +source "arch/arm/mach-rda/Kconfig" + source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-rockchip/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 0436002d5091..9db3c584b2cb 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -202,6 +202,7 @@ machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_QCOM) += qcom +machine-$(CONFIG_ARCH_RDA) += rda machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 78551c4375d5..bd40148a15b2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -822,6 +822,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8974-sony-xperia-castor.dtb \ qcom-msm8974-sony-xperia-honami.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb +dtb-$(CONFIG_ARCH_RDA) += \ + rda8810pl-orangepi-2g-iot.dtb \ + rda8810pl-orangepi-i96.dtb dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-pb1176.dtb \ arm-realview-pb11mp.dtb \ diff --git a/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts b/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts new file mode 100644 index 000000000000..98e34248ae80 --- /dev/null +++ b/arch/arm/boot/dts/rda8810pl-orangepi-2g-iot.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas Färber + * Copyright (c) 2018 Manivannan Sadhasivam + */ + +/dts-v1/; + +#include "rda8810pl.dtsi" + +/ { + compatible = "xunlong,orangepi-2g-iot", "rda,8810pl"; + model = "Orange Pi 2G-IoT"; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + }; + + chosen { + stdout-path = "serial2:921600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&uart1 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart2 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart3 { + status = "okay"; + clocks = <&uart_clk>; +}; diff --git a/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts b/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts new file mode 100644 index 000000000000..728f76931b99 --- /dev/null +++ b/arch/arm/boot/dts/rda8810pl-orangepi-i96.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas Färber + * Copyright (c) 2018 Manivannan Sadhasivam + */ + +/dts-v1/; + +#include "rda8810pl.dtsi" + +/ { + compatible = "xunlong,orangepi-i96", "rda,8810pl"; + model = "Orange Pi i96"; + + aliases { + serial0 = &uart2; + serial1 = &uart1; + serial2 = &uart3; + }; + + chosen { + stdout-path = "serial2:921600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-clock"; + clock-frequency = <921600>; + #clock-cells = <0>; + }; +}; + +&uart1 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart2 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart3 { + status = "okay"; + clocks = <&uart_clk>; +}; diff --git a/arch/arm/boot/dts/rda8810pl.dtsi b/arch/arm/boot/dts/rda8810pl.dtsi new file mode 100644 index 000000000000..19cde895bf65 --- /dev/null +++ b/arch/arm/boot/dts/rda8810pl.dtsi @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * RDA8810PL SoC + * + * Copyright (c) 2017 Andreas Färber + * Copyright (c) 2018 Manivannan Sadhasivam + */ + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "rda,8810pl"; + interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0x0>; + }; + }; + + sram@100000 { + compatible = "mmio-sram"; + reg = <0x100000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + + apb@20800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20800000 0x100000>; + + intc: interrupt-controller@0 { + compatible = "rda,8810pl-intc"; + reg = <0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + apb@20900000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20900000 0x100000>; + + timer@10000 { + compatible = "rda,8810pl-timer"; + reg = <0x10000 0x1000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>, + <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hwtimer", "ostimer"; + }; + }; + + apb@20a00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x20a00000 0x100000>; + + uart1: serial@0 { + compatible = "rda,8810pl-uart"; + reg = <0x0 0x1000>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: serial@10000 { + compatible = "rda,8810pl-uart"; + reg = <0x10000 0x1000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart3: serial@90000 { + compatible = "rda,8810pl-uart"; + reg = <0x90000 0x1000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + l2: cache-controller@21100000 { + compatible = "arm,pl310-cache"; + reg = <0x21100000 0x1000>; + cache-unified; + cache-level = <2>; + }; +}; diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index f29f49a9f36c..5bee34a7ff2e 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -867,6 +867,7 @@ CONFIG_STM32_DMA=y CONFIG_STM32_DMAMUX=y CONFIG_STM32_MDMA=y CONFIG_TEGRA20_APB_DMA=y +CONFIG_UNIPHIER_MDMAC=y CONFIG_XILINX_DMA=y CONFIG_QCOM_BAM_DMA=y CONFIG_DW_DMAC=y diff --git a/arch/arm/mach-rda/Kconfig b/arch/arm/mach-rda/Kconfig new file mode 100644 index 000000000000..4df8b8ee1a9d --- /dev/null +++ b/arch/arm/mach-rda/Kconfig @@ -0,0 +1,7 @@ +menuconfig ARCH_RDA + bool "RDA Micro SoCs" + depends on ARCH_MULTI_V7 + select RDA_INTC + select RDA_TIMER + help + This enables support for the RDA Micro 8810PL SoC family. diff --git a/arch/arm/mach-rda/Makefile b/arch/arm/mach-rda/Makefile new file mode 100644 index 000000000000..6bea3d3a2dd7 --- /dev/null +++ b/arch/arm/mach-rda/Makefile @@ -0,0 +1 @@ +obj- += dummy.o diff --git a/arch/arm/mach-sti/Makefile b/arch/arm/mach-sti/Makefile index acb330916333..f85ff059cfba 100644 --- a/arch/arm/mach-sti/Makefile +++ b/arch/arm/mach-sti/Makefile @@ -1,2 +1,2 @@ -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_ARCH_STI) += board-dt.o diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S deleted file mode 100644 index e0ad451700d5..000000000000 --- a/arch/arm/mach-sti/headsmp.S +++ /dev/null @@ -1,43 +0,0 @@ -/* - * arch/arm/mach-sti/headsmp.S - * - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * http://www.st.com - * - * Cloned from linux/arch/arm/mach-vexpress/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> - -/* - * ST specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(sti_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup -ENDPROC(sti_secondary_startup) - -1: .long . - .long pen_release diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c index 231f19e17436..d0272a839ffb 100644 --- a/arch/arm/mach-sti/platsmp.c +++ b/arch/arm/mach-sti/platsmp.c @@ -28,82 +28,33 @@ #include "smp.h" -static void write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - sync_cache_w(&pen_release); -} - -static DEFINE_SPINLOCK(boot_lock); - -static void sti_secondary_init(unsigned int cpu) -{ - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} +static u32 __iomem *cpu_strt_ptr; static int sti_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); + unsigned long entry_pa = __pa_symbol(secondary_startup); /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. + * Secondary CPU is initialised and started by a U-BOOTROM firmware. + * Secondary CPU is spinning and waiting for a write at cpu_strt_ptr. + * Writing secondary_startup address at cpu_strt_ptr makes it to + * jump directly to secondary_startup(). */ - write_pen_release(cpu_logical_map(cpu)); + __raw_writel(entry_pa, cpu_strt_ptr); - /* - * Send the secondary CPU a soft interrupt, thereby causing - * it to jump to the secondary entrypoint. - */ - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); + /* wmb so that data is actually written before cache flush is done */ + smp_wmb(); + sync_cache_w(cpu_strt_ptr); - return pen_release != -1 ? -ENOSYS : 0; + return 0; } static void __init sti_smp_prepare_cpus(unsigned int max_cpus) { struct device_node *np; void __iomem *scu_base; - u32 __iomem *cpu_strt_ptr; u32 release_phys; int cpu; - unsigned long entry_pa = __pa_symbol(sti_secondary_startup); np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); @@ -131,8 +82,8 @@ static void __init sti_smp_prepare_cpus(unsigned int max_cpus) } /* - * holding pen is usually configured in SBC DMEM but can also be - * in RAM. + * cpu-release-addr is usually configured in SBC DMEM but can + * also be in RAM. */ if (!memblock_is_memory(release_phys)) @@ -142,22 +93,11 @@ static void __init sti_smp_prepare_cpus(unsigned int max_cpus) cpu_strt_ptr = (u32 __iomem *)phys_to_virt(release_phys); - __raw_writel(entry_pa, cpu_strt_ptr); - - /* - * wmb so that data is actually written - * before cache flush is done - */ - smp_wmb(); - sync_cache_w(cpu_strt_ptr); - - if (!memblock_is_memory(release_phys)) - iounmap(cpu_strt_ptr); + set_cpu_possible(cpu, true); } } const struct smp_operations sti_smp_ops __initconst = { .smp_prepare_cpus = sti_smp_prepare_cpus, - .smp_secondary_init = sti_secondary_init, .smp_boot_secondary = sti_boot_secondary, }; diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 28f052185eb6..251ecf34cb02 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -142,6 +142,14 @@ config ARCH_MVEBU - Armada 7K SoC Family - Armada 8K SoC Family +config ARCH_MXC + bool "ARMv8 based NXP i.MX SoC family" + select ARM64_ERRATUM_843419 + select ARM64_ERRATUM_845719 + help + This enables support for the ARMv8 based SoCs in the + NXP i.MX family. + config ARCH_QCOM bool "Qualcomm Platforms" select GPIOLIB diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index f3ed4c078ba5..d88e2f0e179a 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -1202,6 +1202,20 @@ status = "okay"; }; +&serial_3 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>; + clocks = <&s2mps13_osc S2MPS11_CLK_BT>; + clock-names = "extclk"; + }; +}; + &spi_1 { cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 84446f95b2eb..e7cd3b67d818 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -544,6 +544,21 @@ power-domains = <&pd_cam1>; }; + cmu_imem: clock-controller@11060000 { + compatible = "samsung,exynos5433-cmu-imem"; + reg = <0x11060000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_imem_sssx_266", + "aclk_imem_266", + "aclk_imem_200"; + clocks = <&xxti>, + <&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>, + <&cmu_top CLK_DIV_ACLK_IMEM_266>, + <&cmu_top CLK_DIV_ACLK_IMEM_200>; + }; + pd_gscl: power-domain@105c4000 { compatible = "samsung,exynos5433-pd"; reg = <0x105c4000 0x20>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 7748e6dfc3c9..f9be2426f83c 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -18,3 +18,5 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb + +dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts new file mode 100644 index 000000000000..64acccc4bfcb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017 NXP + * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de> + */ + +/dts-v1/; + +#include "imx8mq.dtsi" + +/ { + model = "NXP i.MX8MQ EVK"; + compatible = "fsl,imx8mq-evk", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x00000000 0x40000000 0 0xc0000000>; + }; + + reg_usdhc2_vmmc: regulator-vsd-3v3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2>; + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <975000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1675000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1625000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3625000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vqmmc-supply = <&sw4_reg>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_reg_usdhc2: regusdhc2grpgpio { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_wdog: wdog1grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h new file mode 100644 index 000000000000..b94b02080a34 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h @@ -0,0 +1,623 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP + */ + +#ifndef __DTS_IMX8MQ_PINFUNC_H +#define __DTS_IMX8MQ_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ + +#define MX8MQ_IOMUXC_PMIC_STBY_REQ_CCMSRCGPCMIX_PMIC_STBY_REQ 0x014 0x27C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_PMIC_ON_REQ_SNVSMIX_PMIC_ON_REQ 0x018 0x280 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ONOFF_SNVSMIX_ONOFF 0x01C 0x284 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_POR_B_SNVSMIX_POR_B 0x020 0x288 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_RTC_RESET_B_SNVSMIX_RTC_RESET_B 0x024 0x28C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x4C0 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO00_SJC_FAIL 0x028 0x290 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M 0x02C 0x294 0x4BC 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2 0x02C 0x294 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO01_SJC_ACTIVE 0x02C 0x294 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x030 0x298 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x030 0x298 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY 0x030 0x298 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO02_SJC_DE_B 0x030 0x298 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x034 0x29C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x034 0x29C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0 0x034 0x29C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK 0x034 0x29C 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO03_SJC_DONE 0x034 0x29C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x038 0x2A0 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x038 0x2A0 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1 0x038 0x2A0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV 0x038 0x2A0 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO04_USDHC1_TEST_TRIG 0x038 0x2A0 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x03C 0x2A4 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO05_M4_NMI 0x03C 0x2A4 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY 0x03C 0x2A4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT 0x03C 0x2A4 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO05_USDHC2_TEST_TRIG 0x03C 0x2A4 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x040 0x2A8 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO06_ENET1_MDC 0x040 0x2A8 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO06_USDHC1_CD_B 0x040 0x2A8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3 0x040 0x2A8 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO06_ECSPI1_TEST_TRIG 0x040 0x2A8 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x044 0x2AC 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO07_ENET1_MDIO 0x044 0x2AC 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO07_USDHC1_WP 0x044 0x2AC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4 0x044 0x2AC 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO07_ECSPI2_TEST_TRIG 0x044 0x2AC 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x048 0x2B0 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x048 0x2B0 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO08_USDHC2_RESET_B 0x048 0x2B0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT 0x048 0x2B0 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO08_QSPI_TEST_TRIG 0x048 0x2B0 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x04C 0x2B4 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x04C 0x2B4 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0 0x04C 0x2B4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP 0x04C 0x2B4 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO09_RAWNAND_TEST_TRIG 0x04C 0x2B4 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x050 0x2B8 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x050 0x2B8 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO10_OCOTP_CTRL_WRAPPER_FUSE_LATCHED 0x050 0x2B8 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x054 0x2BC 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO11_USB2_OTG_ID 0x054 0x2BC 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY 0x054 0x2BC 0x4BC 0x5 0x1 +#define MX8MQ_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0 0x054 0x2BC 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO11_CAAM_WRAPPER_RNG_OSC_OBS 0x054 0x2BC 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x058 0x2C0 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x058 0x2C0 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1 0x058 0x2C0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1 0x058 0x2C0 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO12_CSU_CSU_ALARM_AUT0 0x058 0x2C0 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x05C 0x2C4 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x05C 0x2C4 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x05C 0x2C4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2 0x05C 0x2C4 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO13_CSU_CSU_ALARM_AUT1 0x05C 0x2C4 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x060 0x2C8 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO14_USB2_OTG_PWR 0x060 0x2C8 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT 0x060 0x2C8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x060 0x2C8 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO14_CSU_CSU_ALARM_AUT2 0x060 0x2C8 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x064 0x2CC 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x064 0x2CC 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO15_PWM4_OUT 0x064 0x2CC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x064 0x2CC 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_GPIO1_IO15_CSU_CSU_INT_DEB 0x064 0x2CC 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x068 0x2D0 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16 0x068 0x2D0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x06C 0x2D4 0x4C0 0x0 0x1 +#define MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17 0x06C 0x2D4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x070 0x2D8 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_TD3_GPIO1_IO18 0x070 0x2D8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x074 0x2DC 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x074 0x2DC 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_ENET_TD2_GPIO1_IO19 0x074 0x2DC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x078 0x2E0 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20 0x078 0x2E0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x07C 0x2E4 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_TD0_GPIO1_IO21 0x07C 0x2E4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x080 0x2E8 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x080 0x2E8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x084 0x2EC 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_TXC_ENET1_TX_ER 0x084 0x2EC 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_ENET_TXC_GPIO1_IO23 0x084 0x2EC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x088 0x2F0 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x088 0x2F0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x08C 0x2F4 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_RXC_ENET1_RX_ER 0x08C 0x2F4 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25 0x08C 0x2F4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x090 0x2F8 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_RD0_GPIO1_IO26 0x090 0x2F8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x094 0x2FC 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27 0x094 0x2FC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x098 0x300 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28 0x098 0x300 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x09C 0x304 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x09C 0x304 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x0A0 0x308 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_CLK_GPIO2_IO0 0x0A0 0x308 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0x0A4 0x30C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_CMD_GPIO2_IO1 0x0A4 0x30C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0A8 0x310 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2 0x0A8 0x31 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0AC 0x314 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_DATA1_GPIO2_IO3 0x0AC 0x314 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0B0 0x318 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_DATA2_GPIO2_IO4 0x0B0 0x318 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0B4 0x31C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_DATA3_GPIO2_IO5 0x0B4 0x31C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0B8 0x320 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0B8 0x320 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0BC 0x324 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_DATA5_GPIO2_IO7 0x0BC 0x324 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0C0 0x328 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_DATA6_GPIO2_IO8 0x0C0 0x328 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0C4 0x32C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_DATA7_GPIO2_IO9 0x0C4 0x32C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x0C8 0x330 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x0C8 0x330 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x0CC 0x334 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD1_STROBE_GPIO2_IO11 0x0CC 0x334 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0D0 0x338 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0D0 0x338 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x0D4 0x33C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD2_CLK_GPIO2_IO13 0x0D4 0x33C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0 0x0D4 0x33C 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SD2_CLK_OBSERVE_MUX_OUT0 0x0D4 0x33C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0x0D8 0x340 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD2_CMD_GPIO2_IO14 0x0D8 0x340 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1 0x0D8 0x340 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SD2_CMD_OBSERVE_MUX_OUT1 0x0D8 0x340 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0DC 0x344 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD2_DATA0_GPIO2_IO15 0x0DC 0x344 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2 0x0DC 0x344 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SD2_DATA0_OBSERVE_MUX_OUT2 0x0DC 0x344 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0E0 0x348 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD2_DATA1_GPIO2_IO16 0x0E0 0x348 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT 0x0E0 0x348 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SD2_DATA1_OBSERVE_MUX_OUT3 0x0E0 0x348 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0E4 0x34C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD2_DATA2_GPIO2_IO17 0x0E4 0x34C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP 0x0E4 0x34C 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SD2_DATA2_OBSERVE_MUX_OUT4 0x0E4 0x34C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0E8 0x350 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD2_DATA3_GPIO2_IO18 0x0E8 0x350 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET 0x0E8 0x350 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x0EC 0x354 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x0EC 0x354 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET 0x0EC 0x354 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SD2_WP_USDHC2_WP 0x0F0 0x358 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x0F0 0x358 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SD2_WP_SIM_M_HMASTLOCK 0x0F0 0x358 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_ALE_RAWNAND_ALE 0x0F4 0x35C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x0F4 0x35C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x0F4 0x35C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_ALE_SIM_M_HPROT0 0x0F4 0x35C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x0F8 0x360 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x0F8 0x360 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x0F8 0x360 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_CE0_B_SIM_M_HPROT1 0x0F8 0x360 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B 0x0FC 0x364 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x0FC 0x364 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x0FC 0x364 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_CE1_B_SIM_M_HPROT2 0x0FC 0x364 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B 0x100 0x368 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B 0x100 0x368 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x100 0x368 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_CE2_B_SIM_M_HPROT3 0x100 0x368 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B 0x104 0x36C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B 0x104 0x36C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x104 0x36C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_CE3_B_SIM_M_HADDR0 0x104 0x36C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_CLE_RAWNAND_CLE 0x108 0x370 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_CLE_QSPI_B_SCLK 0x108 0x370 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x108 0x370 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_CLE_SIM_M_HADDR1 0x108 0x370 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x10C 0x374 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x10C 0x374 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_DATA00_GPIO3_IO6 0x10C 0x374 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_DATA00_SIM_M_HADDR2 0x10C 0x374 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x110 0x378 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x110 0x378 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x110 0x378 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_DATA01_SIM_M_HADDR3 0x110 0x378 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x114 0x37C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x114 0x37C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x114 0x37C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_DATA02_SIM_M_HADDR4 0x114 0x37C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x118 0x380 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x118 0x380 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x118 0x380 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_DATA03_SIM_M_HADDR5 0x118 0x380 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x11C 0x384 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_DATA04_QSPI_B_DATA0 0x11C 0x384 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x11C 0x384 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_DATA04_SIM_M_HADDR6 0x11C 0x384 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x120 0x388 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_DATA05_QSPI_B_DATA1 0x120 0x388 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x120 0x388 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_DATA05_SIM_M_HADDR7 0x120 0x388 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x124 0x38C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_DATA06_QSPI_B_DATA2 0x124 0x38C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x124 0x38C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_DATA06_SIM_M_HADDR8 0x124 0x38C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x128 0x390 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_DATA07_QSPI_B_DATA3 0x128 0x390 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13 0x128 0x390 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_DATA07_SIM_M_HADDR9 0x128 0x390 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_DQS_RAWNAND_DQS 0x12C 0x394 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_DQS_QSPI_A_DQS 0x12C 0x394 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x12C 0x394 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_DQS_SIM_M_HADDR10 0x12C 0x394 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x130 0x398 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_RE_B_QSPI_B_DQS 0x130 0x398 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x130 0x398 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_RE_B_SIM_M_HADDR11 0x130 0x398 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x134 0x39C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x134 0x39C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_READY_B_SIM_M_HADDR12 0x134 0x39C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x138 0x3A0 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x138 0x3A0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_WE_B_SIM_M_HADDR13 0x138 0x3A0 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x13C 0x3A4 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x13C 0x3A4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_NAND_WP_B_SIM_M_HADDR14 0x13C 0x3A4 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0x140 0x3A8 0x4E4 0x0 0x0 +#define MX8MQ_IOMUXC_SAI5_RXFS_SAI1_TX_DATA0 0x140 0x3A8 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x140 0x3A8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI5_RXC_SAI5_RX_BCLK 0x144 0x3AC 0x4D0 0x0 0x0 +#define MX8MQ_IOMUXC_SAI5_RXC_SAI1_TX_DATA1 0x144 0x3AC 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x144 0x3AC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x148 0x3B0 0x4D4 0x0 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD0_SAI1_TX_DATA2 0x148 0x3B0 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x148 0x3B0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1 0x14C 0x3B4 0x4D8 0x0 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD1_SAI1_TX_DATA3 0x14C 0x3B4 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD1_SAI1_TX_SYNC 0x14C 0x3B4 0x4CC 0x2 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x14C 0x3B4 0x4EC 0x3 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x14C 0x3B4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2 0x150 0x3B8 0x4DC 0x0 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4 0x150 0x3B8 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC 0x150 0x3B8 0x4CC 0x2 0x1 +#define MX8MQ_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x150 0x3B8 0x4E8 0x3 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x150 0x3B8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3 0x154 0x3BC 0x4E0 0x0 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5 0x154 0x3BC 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD3_SAI1_TX_SYNC 0x154 0x3BC 0x4CC 0x2 0x2 +#define MX8MQ_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x154 0x3BC 0x000 0x3 0x0 +#define MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x154 0x3BC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x158 0x3C0 0x52C 0x0 0x0 +#define MX8MQ_IOMUXC_SAI5_MCLK_SAI1_TX_BCLK 0x158 0x3C0 0x4C8 0x1 0x0 +#define MX8MQ_IOMUXC_SAI5_MCLK_SAI4_MCLK 0x158 0x3C0 0x000 0x2 0x0 +#define MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x158 0x3C0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI5_MCLK_CCMSRCGPCMIX_TESTER_ACK 0x158 0x3C0 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_RXFS_SAI1_RX_SYNC 0x15C 0x3C4 0x4C4 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_RXFS_SAI5_RX_SYNC 0x15C 0x3C4 0x4E4 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_RXFS_CORESIGHT_TRACE_CLK 0x15C 0x3C4 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x15C 0x3C4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_RXFS_SIM_M_HADDR15 0x15C 0x3C4 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_RXC_SAI1_RX_BCLK 0x160 0x3C8 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_RXC_SAI5_RX_BCLK 0x160 0x3C8 0x4D0 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_RXC_CORESIGHT_TRACE_CTL 0x160 0x3C8 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1 0x160 0x3C8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_RXC_SIM_M_HADDR16 0x160 0x3C8 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0 0x164 0x3CC 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD0_SAI5_RX_DATA0 0x164 0x3CC 0x4D4 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_RXD0_CORESIGHT_TRACE0 0x164 0x3CC 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x164 0x3CC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD0_CCMSRCGPCMIX_BOOT_CFG0 0x164 0x3CC 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD0_SIM_M_HADDR17 0x164 0x3CC 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1 0x168 0x3D0 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD1_SAI5_RX_DATA1 0x168 0x3D0 0x4D8 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_RXD1_CORESIGHT_TRACE1 0x168 0x3D0 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x168 0x3D0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD1_CCMSRCGPCMIX_BOOT_CFG1 0x168 0x3D0 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD1_SIM_M_HADDR18 0x168 0x3D0 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD2_SAI1_RX_DATA2 0x16C 0x3D4 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD2_SAI5_RX_DATA2 0x16C 0x3D4 0x4DC 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_RXD2_CORESIGHT_TRACE2 0x16C 0x3D4 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x16C 0x3D4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD2_CCMSRCGPCMIX_BOOT_CFG2 0x16C 0x3D4 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD2_SIM_M_HADDR19 0x16C 0x3D4 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD3_SAI1_RX_DATA3 0x170 0x3D8 0x4E0 0x0 0x1 +#define MX8MQ_IOMUXC_SAI1_RXD3_SAI5_RX_DATA3 0x170 0x3D8 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD3_CORESIGHT_TRACE3 0x170 0x3D8 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x170 0x3D8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD3_CCMSRCGPCMIX_BOOT_CFG3 0x170 0x3D8 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD3_SIM_M_HADDR20 0x170 0x3D8 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD4_SAI1_RX_DATA4 0x174 0x3DC 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK 0x174 0x3DC 0x51C 0x1 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD4_SAI6_RX_BCLK 0x174 0x3DC 0x510 0x2 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD4_CORESIGHT_TRACE4 0x174 0x3DC 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x174 0x3DC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD4_CCMSRCGPCMIX_BOOT_CFG4 0x174 0x3DC 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD4_SIM_M_HADDR21 0x174 0x3DC 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD5_SAI1_RX_DATA5 0x178 0x3E0 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0 0x178 0x3E0 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0x178 0x3E0 0x514 0x2 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD5_SAI1_RX_SYNC 0x178 0x3E0 0x4C4 0x3 0x1 +#define MX8MQ_IOMUXC_SAI1_RXD5_CORESIGHT_TRACE5 0x178 0x3E0 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x178 0x3E0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD5_CCMSRCGPCMIX_BOOT_CFG5 0x178 0x3E0 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD5_SIM_M_HADDR22 0x178 0x3E0 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD6_SAI1_RX_DATA6 0x17C 0x3E4 0x520 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC 0x17C 0x3E4 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0x17C 0x3E4 0x518 0x2 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD6_CORESIGHT_TRACE6 0x17C 0x3E4 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x17C 0x3E4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD6_CCMSRCGPCMIX_BOOT_CFG6 0x17C 0x3E4 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD6_SIM_M_HADDR23 0x17C 0x3E4 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_RX_DATA7 0x180 0x3E8 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD7_SAI6_MCLK 0x180 0x3E8 0x530 0x1 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_TX_SYNC 0x180 0x3E8 0x4CC 0x2 0x4 +#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_TX_DATA4 0x180 0x3E8 0x000 0x3 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD7_CORESIGHT_TRACE7 0x180 0x3E8 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x180 0x3E8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD7_CCMSRCGPCMIX_BOOT_CFG7 0x180 0x3E8 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_RXD7_SIM_M_HADDR24 0x180 0x3E8 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0x184 0x3EC 0x4CC 0x0 0x3 +#define MX8MQ_IOMUXC_SAI1_TXFS_SAI5_TX_SYNC 0x184 0x3EC 0x4EC 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_TXFS_CORESIGHT_EVENTO 0x184 0x3EC 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x184 0x3EC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_TXFS_SIM_M_HADDR25 0x184 0x3EC 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0x188 0x3F0 0x4C8 0x0 0x1 +#define MX8MQ_IOMUXC_SAI1_TXC_SAI5_TX_BCLK 0x188 0x3F0 0x4E8 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_TXC_CORESIGHT_EVENTI 0x188 0x3F0 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_TXC_GPIO4_IO11 0x188 0x3F0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_TXC_SIM_M_HADDR26 0x188 0x3F0 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0x18C 0x3F4 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD0_SAI5_TX_DATA0 0x18C 0x3F4 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD0_CORESIGHT_TRACE8 0x18C 0x3F4 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x18C 0x3F4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD0_CCMSRCGPCMIX_BOOT_CFG8 0x18C 0x3F4 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD0_SIM_M_HADDR27 0x18C 0x3F4 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1 0x190 0x3F8 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD1_SAI5_TX_DATA1 0x190 0x3F8 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD1_CORESIGHT_TRACE9 0x190 0x3F8 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x190 0x3F8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD1_CCMSRCGPCMIX_BOOT_CFG9 0x190 0x3F8 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD1_SIM_M_HADDR28 0x190 0x3F8 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2 0x194 0x3FC 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD2_SAI5_TX_DATA2 0x194 0x3FC 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD2_CORESIGHT_TRACE10 0x194 0x3FC 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x194 0x3FC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD2_CCMSRCGPCMIX_BOOT_CFG10 0x194 0x3FC 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD2_SIM_M_HADDR29 0x194 0x3FC 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3 0x198 0x400 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD3_SAI5_TX_DATA3 0x198 0x400 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD3_CORESIGHT_TRACE11 0x198 0x400 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x198 0x400 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD3_CCMSRCGPCMIX_BOOT_CFG11 0x198 0x400 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD3_SIM_M_HADDR30 0x198 0x400 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4 0x19C 0x404 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0x19C 0x404 0x510 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_TXD4_SAI6_TX_BCLK 0x19C 0x404 0x51C 0x2 0x1 +#define MX8MQ_IOMUXC_SAI1_TXD4_CORESIGHT_TRACE12 0x19C 0x404 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x19C 0x404 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD4_CCMSRCGPCMIX_BOOT_CFG12 0x19C 0x404 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD4_SIM_M_HADDR31 0x19C 0x404 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5 0x1A0 0x408 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0 0x1A0 0x408 0x514 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0x1A0 0x408 0x000 0x2 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD5_CORESIGHT_TRACE13 0x1A0 0x408 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x1A0 0x408 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD5_CCMSRCGPCMIX_BOOT_CFG13 0x1A0 0x408 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD5_SIM_M_HBURST0 0x1A0 0x408 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6 0x1A4 0x40C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD6_SAI6_RX_SYNC 0x1A4 0x40C 0x518 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_TXD6_SAI6_TX_SYNC 0x1A4 0x40C 0x520 0x2 0x1 +#define MX8MQ_IOMUXC_SAI1_TXD6_CORESIGHT_TRACE14 0x1A4 0x40C 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1A4 0x40C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD6_CCMSRCGPCMIX_BOOT_CFG14 0x1A4 0x40C 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD6_SIM_M_HBURST1 0x1A4 0x40C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7 0x1A8 0x410 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD7_SAI6_MCLK 0x1A8 0x410 0x530 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_TXD7_CORESIGHT_TRACE15 0x1A8 0x410 0x000 0x4 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x1A8 0x410 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD7_CCMSRCGPCMIX_BOOT_CFG15 0x1A8 0x410 0x000 0x6 0x0 +#define MX8MQ_IOMUXC_SAI1_TXD7_SIM_M_HBURST2 0x1A8 0x410 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI1_MCLK_SAI1_MCLK 0x1AC 0x414 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI1_MCLK_SAI5_MCLK 0x1AC 0x414 0x52C 0x1 0x1 +#define MX8MQ_IOMUXC_SAI1_MCLK_SAI1_TX_BCLK 0x1AC 0x414 0x4C8 0x2 0x2 +#define MX8MQ_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1AC 0x414 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI1_MCLK_SIM_M_HRESP 0x1AC 0x414 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0x1B0 0x418 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC 0x1B0 0x418 0x4EC 0x1 0x2 +#define MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x1B0 0x418 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0 0x1B0 0x418 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0x1B4 0x41C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI2_RXC_SAI5_TX_BCLK 0x1B4 0x41C 0x4E8 0x1 0x2 +#define MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1B4 0x41C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI2_RXC_SIM_M_HSIZE1 0x1B4 0x41C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x1B8 0x420 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0 0x1B8 0x420 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x1B8 0x420 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2 0x1B8 0x420 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x1BC 0x424 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1 0x1BC 0x424 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x1BC 0x424 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI2_TXFS_SIM_M_HWRITE 0x1BC 0x424 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x1C0 0x428 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI2_TXC_SAI5_TX_DATA2 0x1C0 0x428 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI2_TXC_GPIO4_IO25 0x1C0 0x428 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI2_TXC_SIM_M_HREADYOUT 0x1C0 0x428 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0x1C4 0x42C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3 0x1C4 0x42C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x1C4 0x42C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI2_TXD0_TPSMP_CLK 0x1C4 0x42C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0x1C8 0x430 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI2_MCLK_SAI5_MCLK 0x1C8 0x430 0x52C 0x1 0x2 +#define MX8MQ_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1C8 0x430 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI2_MCLK_TPSMP_HDATA_DIR 0x1C8 0x430 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x1CC 0x434 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1 0x1CC 0x434 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC 0x1CC 0x434 0x4E4 0x2 0x2 +#define MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0 0x1CC 0x434 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI3_RXC_GPT1_CAPTURE2 0x1D0 0x438 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 +#define MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x1D4 0x43C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI3_RXD_GPT1_COMPARE1 0x1D4 0x43C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI3_RXD_SAI5_RX_DATA0 0x1D4 0x43C 0x4D4 0x2 0x2 +#define MX8MQ_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI3_TXFS_GPT1_CLK 0x1D8 0x440 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 +#define MX8MQ_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x1DC 0x444 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x2 +#define MX8MQ_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI3_TXC_TPSMP_HDATA2 0x1DC 0x444 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI3_TXD_GPT1_COMPARE3 0x1E0 0x448 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI3_TXD_SAI5_RX_DATA3 0x1E0 0x448 0x4E0 0x2 0x2 +#define MX8MQ_IOMUXC_SAI3_TXD_GPIO5_IO1 0x1E0 0x448 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI3_TXD_TPSMP_HDATA3 0x1E0 0x448 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x1E4 0x44C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT 0x1E4 0x44C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SAI3_MCLK_SAI5_MCLK 0x1E4 0x44C 0x52C 0x2 0x3 +#define MX8MQ_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1E4 0x44C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SAI3_MCLK_TPSMP_HDATA4 0x1E4 0x44C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0x1E8 0x450 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT 0x1E8 0x450 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1E8 0x450 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SPDIF_TX_TPSMP_HDATA5 0x1E8 0x450 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN 0x1EC 0x454 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SPDIF_RX_PWM2_OUT 0x1EC 0x454 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0x1EC 0x454 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SPDIF_RX_TPSMP_HDATA6 0x1EC 0x454 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK 0x1F0 0x458 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x1F0 0x458 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x1F0 0x458 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_TPSMP_HDATA7 0x1F0 0x458 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x1F4 0x45C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1F4 0x45C 0x504 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX 0x1F4 0x45C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6 0x1F4 0x45C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ECSPI1_SCLK_TPSMP_HDATA8 0x1F4 0x45C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x1F8 0x460 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1F8 0x460 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX 0x1F8 0x460 0x504 0x1 0x1 +#define MX8MQ_IOMUXC_ECSPI1_MOSI_GPIO5_IO7 0x1F8 0x460 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ECSPI1_MOSI_TPSMP_HDATA9 0x1F8 0x460 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1FC 0x464 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1FC 0x464 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B 0x1FC 0x464 0x500 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x1FC 0x464 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ECSPI1_MISO_TPSMP_HDATA10 0x1FC 0x464 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_ECSPI1_SS0_ECSPI1_SS0 0x200 0x468 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x200 0x468 0x500 0x1 0x1 +#define MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B 0x200 0x468 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x200 0x468 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ECSPI1_SS0_TPSMP_HDATA11 0x200 0x468 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x204 0x46C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x204 0x46C 0x50C 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX 0x204 0x46C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x204 0x46C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ECSPI2_SCLK_TPSMP_HDATA12 0x204 0x46C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x208 0x470 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x208 0x470 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX 0x208 0x470 0x50C 0x1 0x1 +#define MX8MQ_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x208 0x470 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ECSPI2_MOSI_TPSMP_HDATA13 0x208 0x470 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x20C 0x474 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x20C 0x474 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B 0x20C 0x474 0x508 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x20C 0x474 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ECSPI2_MISO_TPSMP_HDATA14 0x20C 0x474 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x210 0x478 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x210 0x478 0x508 0x1 0x1 +#define MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B 0x210 0x478 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x210 0x478 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_ECSPI2_SS0_TPSMP_HDATA15 0x210 0x478 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x214 0x47C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_I2C1_SCL_ENET1_MDC 0x214 0x47C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14 0x214 0x47C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_I2C1_SCL_TPSMP_HDATA16 0x214 0x47C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x218 0x480 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_I2C1_SDA_ENET1_MDIO 0x218 0x480 0x4C0 0x1 0x2 +#define MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15 0x218 0x480 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_I2C1_SDA_TPSMP_HDATA17 0x218 0x480 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x21C 0x484 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN 0x21C 0x484 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_I2C2_SCL_GPIO5_IO16 0x21C 0x484 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_I2C2_SCL_TPSMP_HDATA18 0x21C 0x484 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x220 0x488 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT 0x220 0x488 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_I2C2_SDA_GPIO5_IO17 0x220 0x488 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_I2C2_SDA_TPSMP_HDATA19 0x220 0x488 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x224 0x48C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_I2C3_SCL_PWM4_OUT 0x224 0x48C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_I2C3_SCL_GPT2_CLK 0x224 0x48C 0x000 0x2 0x0 +#define MX8MQ_IOMUXC_I2C3_SCL_GPIO5_IO18 0x224 0x48C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_I2C3_SCL_TPSMP_HDATA20 0x224 0x48C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x228 0x490 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_I2C3_SDA_PWM3_OUT 0x228 0x490 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_I2C3_SDA_GPT3_CLK 0x228 0x490 0x000 0x2 0x0 +#define MX8MQ_IOMUXC_I2C3_SDA_GPIO5_IO19 0x228 0x490 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_I2C3_SDA_TPSMP_HDATA21 0x228 0x490 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x22C 0x494 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_I2C4_SCL_PWM2_OUT 0x22C 0x494 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x22C 0x494 0x524 0x2 0x0 +#define MX8MQ_IOMUXC_I2C4_SCL_GPIO5_IO20 0x22C 0x494 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_I2C4_SCL_TPSMP_HDATA22 0x22C 0x494 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x230 0x498 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_I2C4_SDA_PWM1_OUT 0x230 0x498 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B 0x230 0x498 0x528 0x2 0x0 +#define MX8MQ_IOMUXC_I2C4_SDA_GPIO5_IO21 0x230 0x498 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_I2C4_SDA_TPSMP_HDATA23 0x230 0x498 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x234 0x49C 0x4F4 0x0 0x0 +#define MX8MQ_IOMUXC_UART1_RXD_UART1_DTE_TX 0x234 0x49C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x234 0x49C 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_UART1_RXD_GPIO5_IO22 0x234 0x49C 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_UART1_RXD_TPSMP_HDATA24 0x234 0x49C 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x238 0x4A0 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x0 +#define MX8MQ_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x238 0x4A0 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_UART1_TXD_GPIO5_IO23 0x238 0x4A0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_UART1_TXD_TPSMP_HDATA25 0x238 0x4A0 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x23C 0x4A4 0x4FC 0x0 0x0 +#define MX8MQ_IOMUXC_UART2_RXD_UART2_DTE_TX 0x23C 0x4A4 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_UART2_RXD_ECSPI3_MISO 0x23C 0x4A4 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_UART2_RXD_GPIO5_IO24 0x23C 0x4A4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_UART2_RXD_TPSMP_HDATA26 0x23C 0x4A4 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x240 0x4A8 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_UART2_TXD_UART2_DTE_RX 0x240 0x4A8 0x4FC 0x0 0x1 +#define MX8MQ_IOMUXC_UART2_TXD_ECSPI3_SS0 0x240 0x4A8 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_UART2_TXD_GPIO5_IO25 0x240 0x4A8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_UART2_TXD_TPSMP_HDATA27 0x240 0x4A8 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x244 0x4AC 0x504 0x0 0x2 +#define MX8MQ_IOMUXC_UART3_RXD_UART3_DTE_TX 0x244 0x4AC 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x244 0x4AC 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x244 0x4AC 0x4F0 0x1 0x0 +#define MX8MQ_IOMUXC_UART3_RXD_GPIO5_IO26 0x244 0x4AC 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_UART3_RXD_TPSMP_HDATA28 0x244 0x4AC 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x248 0x4B0 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_UART3_TXD_UART3_DTE_RX 0x248 0x4B0 0x504 0x0 0x3 +#define MX8MQ_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x248 0x4B0 0x4F0 0x1 0x1 +#define MX8MQ_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x248 0x4B0 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_UART3_TXD_GPIO5_IO27 0x248 0x4B0 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_UART3_TXD_TPSMP_HDATA29 0x248 0x4B0 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX 0x24C 0x4B4 0x50C 0x0 0x2 +#define MX8MQ_IOMUXC_UART4_RXD_UART4_DTE_TX 0x24C 0x4B4 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x24C 0x4B4 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_UART4_RXD_UART2_DTE_RTS_B 0x24C 0x4B4 0x4F8 0x1 0x0 +#define MX8MQ_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B 0x24C 0x4B4 0x524 0x2 0x1 +#define MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28 0x24C 0x4B4 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_UART4_RXD_TPSMP_HDATA30 0x24C 0x4B4 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX 0x250 0x4B8 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_UART4_TXD_UART4_DTE_RX 0x250 0x4B8 0x50C 0x0 0x3 +#define MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x250 0x4B8 0x4F8 0x1 0x1 +#define MX8MQ_IOMUXC_UART4_TXD_UART2_DTE_CTS_B 0x250 0x4B8 0x000 0x1 0x0 +#define MX8MQ_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B 0x250 0x4B8 0x528 0x2 0x1 +#define MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x250 0x4B8 0x000 0x5 0x0 +#define MX8MQ_IOMUXC_UART4_TXD_TPSMP_HDATA31 0x250 0x4B8 0x000 0x7 0x0 +#define MX8MQ_IOMUXC_TEST_MODE 0x000 0x254 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_BOOT_MODE0 0x000 0x258 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_BOOT_MODE1 0x000 0x25C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_JTAG_MOD 0x000 0x260 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_JTAG_TRST_B 0x000 0x264 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_JTAG_TDI 0x000 0x268 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_JTAG_TMS 0x000 0x26C 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_JTAG_TCK 0x000 0x270 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_JTAG_TDO 0x000 0x274 0x000 0x0 0x0 +#define MX8MQ_IOMUXC_RTC 0x000 0x278 0x000 0x0 0x0 + +#endif /* __DTS_IMX8MQ_PINFUNC_H */ diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi new file mode 100644 index 000000000000..8e9d6d5ed7b2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -0,0 +1,416 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2017 NXP + * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de> + */ + +#include <dt-bindings/clock/imx8mq-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx8mq-pinfunc.h" + +/ { + /* This should really be the GPC, but we need a driver for this first */ + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + }; + + ckil: clock-ckil { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc_25m: clock-osc-25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "osc_25m"; + }; + + osc_27m: clock-osc-27m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "osc_27m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock-ext2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock-ext3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock-ext4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ + interrupt-parent = <&gic>; + arm,no-tick-in-suspend; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x3e000000>; + + bus@30000000 { /* AIPS1 */ + compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x30000000 0x30000000 0x400000>; + + gpio1: gpio@30200000 { + compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + iomuxc: iomuxc@30330000 { + compatible = "fsl,imx8mq-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + iomuxc_gpr: syscon@30340000 { + compatible = "fsl,imx8mq-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + anatop: syscon@30360000 { + compatible = "fsl,imx8mq-anatop", "syscon"; + reg = <0x30360000 0x10000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + }; + + clk: clock-controller@30380000 { + compatible = "fsl,imx8mq-ccm"; + reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc_25m>, <&osc_27m>, + <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "ckil", "osc_25m", "osc_27m", + "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + + wdog1: watchdog@30280000 { + compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>; + status = "disabled"; + }; + + wdog2: watchdog@30290000 { + compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>; + status = "disabled"; + }; + }; + + bus@30400000 { /* AIPS2 */ + compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x30400000 0x30400000 0x400000>; + }; + + bus@30800000 { /* AIPS3 */ + compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x30800000 0x30800000 0x400000>; + + uart1: serial@30860000 { + compatible = "fsl,imx8mq-uart", + "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_UART1_ROOT>, + <&clk IMX8MQ_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx8mq-uart", + "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_UART3_ROOT>, + <&clk IMX8MQ_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx8mq-uart", + "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_UART2_ROOT>, + <&clk IMX8MQ_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx8mq-uart", + "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_UART4_ROOT>, + <&clk IMX8MQ_CLK_UART4_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + usdhc1: mmc@30b40000 { + compatible = "fsl,imx8mq-usdhc", + "fsl,imx7d-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_DUMMY>, + <&clk IMX8MQ_CLK_NAND_USDHC_BUS>, + <&clk IMX8MQ_CLK_USDHC1_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step = <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc@30b50000 { + compatible = "fsl,imx8mq-usdhc", + "fsl,imx7d-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_DUMMY>, + <&clk IMX8MQ_CLK_NAND_USDHC_BUS>, + <&clk IMX8MQ_CLK_USDHC2_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step = <2>; + bus-width = <4>; + status = "disabled"; + }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>, + <&clk IMX8MQ_CLK_ENET1_ROOT>, + <&clk IMX8MQ_CLK_ENET_TIMER>, + <&clk IMX8MQ_CLK_ENET_REF>, + <&clk IMX8MQ_CLK_ENET_PHY_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + status = "disabled"; + }; + }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x38800000 0x10000>, /* GIC Dist */ + <0x38880000 0xc0000>, /* GICR */ + <0x31000000 0x2000>, /* GICC */ + <0x31010000 0x2000>, /* GICV */ + <0x31020000 0x2000>; /* GICH */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + }; + }; +}; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index d0724d4e0546..3ef443cfbab6 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -403,6 +403,7 @@ CONFIG_THERMAL_EMULATION=y CONFIG_ROCKCHIP_THERMAL=m CONFIG_RCAR_GEN3_THERMAL=y CONFIG_ARMADA_THERMAL=y +CONFIG_BCM2835_THERMAL=m CONFIG_BRCMSTB_THERMAL=m CONFIG_EXYNOS_THERMAL=y CONFIG_TEGRA_BPMP_THERMAL=m diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 63389f075f1d..2d91b00e3591 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -145,6 +145,15 @@ config DA8XX_DDRCTL Texas Instruments da8xx SoCs. It's used to tweak various memory controller configuration options. +config PL353_SMC + tristate "ARM PL35X Static Memory Controller(SMC) driver" + default y + depends on ARM + depends on ARM_AMBA + help + This driver is for the ARM PL351/PL353 Static Memory + Controller(SMC) module. + source "drivers/memory/samsung/Kconfig" source "drivers/memory/tegra/Kconfig" diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile index a01ab3e22f94..90161dec6fa5 100644 --- a/drivers/memory/Makefile +++ b/drivers/memory/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o obj-$(CONFIG_JZ4780_NEMC) += jz4780-nemc.o obj-$(CONFIG_MTK_SMI) += mtk-smi.o obj-$(CONFIG_DA8XX_DDRCTL) += da8xx-ddrctl.o +obj-$(CONFIG_PL353_SMC) += pl353-smc.o obj-$(CONFIG_SAMSUNG_MC) += samsung/ obj-$(CONFIG_TEGRA_MC) += tegra/ diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c new file mode 100644 index 000000000000..73bd3023202f --- /dev/null +++ b/drivers/memory/pl353-smc.c @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM PL353 SMC driver + * + * Copyright (C) 2012 - 2018 Xilinx, Inc + * Author: Punnaiah Choudary Kalluri <punnaiah@xilinx.com> + * Author: Naga Sureshkumar Relli <nagasure@xilinx.com> + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/pl353-smc.h> +#include <linux/amba/bus.h> + +/* Register definitions */ +#define PL353_SMC_MEMC_STATUS_OFFS 0 /* Controller status reg, RO */ +#define PL353_SMC_CFG_CLR_OFFS 0xC /* Clear config reg, WO */ +#define PL353_SMC_DIRECT_CMD_OFFS 0x10 /* Direct command reg, WO */ +#define PL353_SMC_SET_CYCLES_OFFS 0x14 /* Set cycles register, WO */ +#define PL353_SMC_SET_OPMODE_OFFS 0x18 /* Set opmode register, WO */ +#define PL353_SMC_ECC_STATUS_OFFS 0x400 /* ECC status register */ +#define PL353_SMC_ECC_MEMCFG_OFFS 0x404 /* ECC mem config reg */ +#define PL353_SMC_ECC_MEMCMD1_OFFS 0x408 /* ECC mem cmd1 reg */ +#define PL353_SMC_ECC_MEMCMD2_OFFS 0x40C /* ECC mem cmd2 reg */ +#define PL353_SMC_ECC_VALUE0_OFFS 0x418 /* ECC value 0 reg */ + +/* Controller status register specific constants */ +#define PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT 6 + +/* Clear configuration register specific constants */ +#define PL353_SMC_CFG_CLR_INT_CLR_1 0x10 +#define PL353_SMC_CFG_CLR_ECC_INT_DIS_1 0x40 +#define PL353_SMC_CFG_CLR_INT_DIS_1 0x2 +#define PL353_SMC_CFG_CLR_DEFAULT_MASK (PL353_SMC_CFG_CLR_INT_CLR_1 | \ + PL353_SMC_CFG_CLR_ECC_INT_DIS_1 | \ + PL353_SMC_CFG_CLR_INT_DIS_1) + +/* Set cycles register specific constants */ +#define PL353_SMC_SET_CYCLES_T0_MASK 0xF +#define PL353_SMC_SET_CYCLES_T0_SHIFT 0 +#define PL353_SMC_SET_CYCLES_T1_MASK 0xF +#define PL353_SMC_SET_CYCLES_T1_SHIFT 4 +#define PL353_SMC_SET_CYCLES_T2_MASK 0x7 +#define PL353_SMC_SET_CYCLES_T2_SHIFT 8 +#define PL353_SMC_SET_CYCLES_T3_MASK 0x7 +#define PL353_SMC_SET_CYCLES_T3_SHIFT 11 +#define PL353_SMC_SET_CYCLES_T4_MASK 0x7 +#define PL353_SMC_SET_CYCLES_T4_SHIFT 14 +#define PL353_SMC_SET_CYCLES_T5_MASK 0x7 +#define PL353_SMC_SET_CYCLES_T5_SHIFT 17 +#define PL353_SMC_SET_CYCLES_T6_MASK 0xF +#define PL353_SMC_SET_CYCLES_T6_SHIFT 20 + +/* ECC status register specific constants */ +#define PL353_SMC_ECC_STATUS_BUSY BIT(6) +#define PL353_SMC_ECC_REG_SIZE_OFFS 4 + +/* ECC memory config register specific constants */ +#define PL353_SMC_ECC_MEMCFG_MODE_MASK 0xC +#define PL353_SMC_ECC_MEMCFG_MODE_SHIFT 2 +#define PL353_SMC_ECC_MEMCFG_PGSIZE_MASK 0xC + +#define PL353_SMC_DC_UPT_NAND_REGS ((4 << 23) | /* CS: NAND chip */ \ + (2 << 21)) /* UpdateRegs operation */ + +#define PL353_NAND_ECC_CMD1 ((0x80) | /* Write command */ \ + (0 << 8) | /* Read command */ \ + (0x30 << 16) | /* Read End command */ \ + (1 << 24)) /* Read End command calid */ + +#define PL353_NAND_ECC_CMD2 ((0x85) | /* Write col change cmd */ \ + (5 << 8) | /* Read col change cmd */ \ + (0xE0 << 16) | /* Read col change end cmd */ \ + (1 << 24)) /* Read col change end cmd valid */ +#define PL353_NAND_ECC_BUSY_TIMEOUT (1 * HZ) +/** + * struct pl353_smc_data - Private smc driver structure + * @memclk: Pointer to the peripheral clock + * @aclk: Pointer to the APER clock + */ +struct pl353_smc_data { + struct clk *memclk; + struct clk *aclk; +}; + +/* SMC virtual register base */ +static void __iomem *pl353_smc_base; + +/** + * pl353_smc_set_buswidth - Set memory buswidth + * @bw: Memory buswidth (8 | 16) + * Return: 0 on success or negative errno. + */ +int pl353_smc_set_buswidth(unsigned int bw) +{ + if (bw != PL353_SMC_MEM_WIDTH_8 && bw != PL353_SMC_MEM_WIDTH_16) + return -EINVAL; + + writel(bw, pl353_smc_base + PL353_SMC_SET_OPMODE_OFFS); + writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base + + PL353_SMC_DIRECT_CMD_OFFS); + + return 0; +} +EXPORT_SYMBOL_GPL(pl353_smc_set_buswidth); + +/** + * pl353_smc_set_cycles - Set memory timing parameters + * @timings: NAND controller timing parameters + * + * Sets NAND chip specific timing parameters. + */ +void pl353_smc_set_cycles(u32 timings[]) +{ + /* + * Set write pulse timing. This one is easy to extract: + * + * NWE_PULSE = tWP + */ + timings[0] &= PL353_SMC_SET_CYCLES_T0_MASK; + timings[1] = (timings[1] & PL353_SMC_SET_CYCLES_T1_MASK) << + PL353_SMC_SET_CYCLES_T1_SHIFT; + timings[2] = (timings[2] & PL353_SMC_SET_CYCLES_T2_MASK) << + PL353_SMC_SET_CYCLES_T2_SHIFT; + timings[3] = (timings[3] & PL353_SMC_SET_CYCLES_T3_MASK) << + PL353_SMC_SET_CYCLES_T3_SHIFT; + timings[4] = (timings[4] & PL353_SMC_SET_CYCLES_T4_MASK) << + PL353_SMC_SET_CYCLES_T4_SHIFT; + timings[5] = (timings[5] & PL353_SMC_SET_CYCLES_T5_MASK) << + PL353_SMC_SET_CYCLES_T5_SHIFT; + timings[6] = (timings[6] & PL353_SMC_SET_CYCLES_T6_MASK) << + PL353_SMC_SET_CYCLES_T6_SHIFT; + timings[0] |= timings[1] | timings[2] | timings[3] | + timings[4] | timings[5] | timings[6]; + + writel(timings[0], pl353_smc_base + PL353_SMC_SET_CYCLES_OFFS); + writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base + + PL353_SMC_DIRECT_CMD_OFFS); +} +EXPORT_SYMBOL_GPL(pl353_smc_set_cycles); + +/** + * pl353_smc_ecc_is_busy - Read ecc busy flag + * Return: the ecc_status bit from the ecc_status register. 1 = busy, 0 = idle + */ +bool pl353_smc_ecc_is_busy(void) +{ + return ((readl(pl353_smc_base + PL353_SMC_ECC_STATUS_OFFS) & + PL353_SMC_ECC_STATUS_BUSY) == PL353_SMC_ECC_STATUS_BUSY); +} +EXPORT_SYMBOL_GPL(pl353_smc_ecc_is_busy); + +/** + * pl353_smc_get_ecc_val - Read ecc_valueN registers + * @ecc_reg: Index of the ecc_value reg (0..3) + * Return: the content of the requested ecc_value register. + * + * There are four valid ecc_value registers. The argument is truncated to stay + * within this valid boundary. + */ +u32 pl353_smc_get_ecc_val(int ecc_reg) +{ + u32 addr, reg; + + addr = PL353_SMC_ECC_VALUE0_OFFS + + (ecc_reg * PL353_SMC_ECC_REG_SIZE_OFFS); + reg = readl(pl353_smc_base + addr); + + return reg; +} +EXPORT_SYMBOL_GPL(pl353_smc_get_ecc_val); + +/** + * pl353_smc_get_nand_int_status_raw - Get NAND interrupt status bit + * Return: the raw_int_status1 bit from the memc_status register + */ +int pl353_smc_get_nand_int_status_raw(void) +{ + u32 reg; + + reg = readl(pl353_smc_base + PL353_SMC_MEMC_STATUS_OFFS); + reg >>= PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT; + reg &= 1; + + return reg; +} +EXPORT_SYMBOL_GPL(pl353_smc_get_nand_int_status_raw); + +/** + * pl353_smc_clr_nand_int - Clear NAND interrupt + */ +void pl353_smc_clr_nand_int(void) +{ + writel(PL353_SMC_CFG_CLR_INT_CLR_1, + pl353_smc_base + PL353_SMC_CFG_CLR_OFFS); +} +EXPORT_SYMBOL_GPL(pl353_smc_clr_nand_int); + +/** + * pl353_smc_set_ecc_mode - Set SMC ECC mode + * @mode: ECC mode (BYPASS, APB, MEM) + * Return: 0 on success or negative errno. + */ +int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode) +{ + u32 reg; + int ret = 0; + + switch (mode) { + case PL353_SMC_ECCMODE_BYPASS: + case PL353_SMC_ECCMODE_APB: + case PL353_SMC_ECCMODE_MEM: + + reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); + reg &= ~PL353_SMC_ECC_MEMCFG_MODE_MASK; + reg |= mode << PL353_SMC_ECC_MEMCFG_MODE_SHIFT; + writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); + + break; + default: + ret = -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_mode); + +/** + * pl353_smc_set_ecc_pg_size - Set SMC ECC page size + * @pg_sz: ECC page size + * Return: 0 on success or negative errno. + */ +int pl353_smc_set_ecc_pg_size(unsigned int pg_sz) +{ + u32 reg, sz; + + switch (pg_sz) { + case 0: + sz = 0; + break; + case SZ_512: + sz = 1; + break; + case SZ_1K: + sz = 2; + break; + case SZ_2K: + sz = 3; + break; + default: + return -EINVAL; + } + + reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); + reg &= ~PL353_SMC_ECC_MEMCFG_PGSIZE_MASK; + reg |= sz; + writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS); + + return 0; +} +EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_pg_size); + +static int __maybe_unused pl353_smc_suspend(struct device *dev) +{ + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev); + + clk_disable(pl353_smc->memclk); + clk_disable(pl353_smc->aclk); + + return 0; +} + +static int __maybe_unused pl353_smc_resume(struct device *dev) +{ + int ret; + struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev); + + ret = clk_enable(pl353_smc->aclk); + if (ret) { + dev_err(dev, "Cannot enable axi domain clock.\n"); + return ret; + } + + ret = clk_enable(pl353_smc->memclk); + if (ret) { + dev_err(dev, "Cannot enable memory clock.\n"); + clk_disable(pl353_smc->aclk); + return ret; + } + + return ret; +} + +static struct amba_driver pl353_smc_driver; + +static SIMPLE_DEV_PM_OPS(pl353_smc_dev_pm_ops, pl353_smc_suspend, + pl353_smc_resume); + +/** + * pl353_smc_init_nand_interface - Initialize the NAND interface + * @adev: Pointer to the amba_device struct + * @nand_node: Pointer to the pl353_nand device_node struct + */ +static void pl353_smc_init_nand_interface(struct amba_device *adev, + struct device_node *nand_node) +{ + unsigned long timeout; + + pl353_smc_set_buswidth(PL353_SMC_MEM_WIDTH_8); + writel(PL353_SMC_CFG_CLR_INT_CLR_1, + pl353_smc_base + PL353_SMC_CFG_CLR_OFFS); + writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base + + PL353_SMC_DIRECT_CMD_OFFS); + + timeout = jiffies + PL353_NAND_ECC_BUSY_TIMEOUT; + /* Wait till the ECC operation is complete */ + do { + if (pl353_smc_ecc_is_busy()) + cpu_relax(); + else + break; + } while (!time_after_eq(jiffies, timeout)); + + if (time_after_eq(jiffies, timeout)) + return; + + writel(PL353_NAND_ECC_CMD1, + pl353_smc_base + PL353_SMC_ECC_MEMCMD1_OFFS); + writel(PL353_NAND_ECC_CMD2, + pl353_smc_base + PL353_SMC_ECC_MEMCMD2_OFFS); +} + +static const struct of_device_id pl353_smc_supported_children[] = { + { + .compatible = "cfi-flash" + }, + { + .compatible = "arm,pl353-nand-r2p1", + .data = pl353_smc_init_nand_interface + }, + {} +}; + +static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id) +{ + struct pl353_smc_data *pl353_smc; + struct device_node *child; + struct resource *res; + int err; + struct device_node *of_node = adev->dev.of_node; + static void (*init)(struct amba_device *adev, + struct device_node *nand_node); + const struct of_device_id *match = NULL; + + pl353_smc = devm_kzalloc(&adev->dev, sizeof(*pl353_smc), GFP_KERNEL); + if (!pl353_smc) + return -ENOMEM; + + /* Get the NAND controller virtual address */ + res = &adev->res; + pl353_smc_base = devm_ioremap_resource(&adev->dev, res); + if (IS_ERR(pl353_smc_base)) + return PTR_ERR(pl353_smc_base); + + pl353_smc->aclk = devm_clk_get(&adev->dev, "apb_pclk"); + if (IS_ERR(pl353_smc->aclk)) { + dev_err(&adev->dev, "aclk clock not found.\n"); + return PTR_ERR(pl353_smc->aclk); + } + + pl353_smc->memclk = devm_clk_get(&adev->dev, "memclk"); + if (IS_ERR(pl353_smc->memclk)) { + dev_err(&adev->dev, "memclk clock not found.\n"); + return PTR_ERR(pl353_smc->memclk); + } + + err = clk_prepare_enable(pl353_smc->aclk); + if (err) { + dev_err(&adev->dev, "Unable to enable AXI clock.\n"); + return err; + } + + err = clk_prepare_enable(pl353_smc->memclk); + if (err) { + dev_err(&adev->dev, "Unable to enable memory clock.\n"); + goto out_clk_dis_aper; + } + + amba_set_drvdata(adev, pl353_smc); + + /* clear interrupts */ + writel(PL353_SMC_CFG_CLR_DEFAULT_MASK, + pl353_smc_base + PL353_SMC_CFG_CLR_OFFS); + + /* Find compatible children. Only a single child is supported */ + for_each_available_child_of_node(of_node, child) { + match = of_match_node(pl353_smc_supported_children, child); + if (!match) { + dev_warn(&adev->dev, "unsupported child node\n"); + continue; + } + break; + } + if (!match) { + dev_err(&adev->dev, "no matching children\n"); + goto out_clk_disable; + } + + init = match->data; + if (init) + init(adev, child); + of_platform_device_create(child, NULL, &adev->dev); + + return 0; + +out_clk_disable: + clk_disable_unprepare(pl353_smc->memclk); +out_clk_dis_aper: + clk_disable_unprepare(pl353_smc->aclk); + + return err; +} + +static int pl353_smc_remove(struct amba_device *adev) +{ + struct pl353_smc_data *pl353_smc = amba_get_drvdata(adev); + + clk_disable_unprepare(pl353_smc->memclk); + clk_disable_unprepare(pl353_smc->aclk); + + return 0; +} + +static const struct amba_id pl353_ids[] = { + { + .id = 0x00041353, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; +MODULE_DEVICE_TABLE(amba, pl353_ids); + +static struct amba_driver pl353_smc_driver = { + .drv = { + .owner = THIS_MODULE, + .name = "pl353-smc", + .pm = &pl353_smc_dev_pm_ops, + }, + .id_table = pl353_ids, + .probe = pl353_smc_probe, + .remove = pl353_smc_remove, +}; + +module_amba_driver(pl353_smc_driver); + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("ARM PL353 SMC Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c index 34dce850067b..e5efce3c08e2 100644 --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -631,6 +631,9 @@ static struct optee *optee_probe(struct device_node *np) optee_enable_shm_cache(optee); + if (optee->sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM) + pr_info("dynamic shared memory is enabled\n"); + pr_info("initialized driver\n"); return optee; err: diff --git a/drivers/tee/optee/supp.c b/drivers/tee/optee/supp.c index df35fc01fd3e..43626e15703a 100644 --- a/drivers/tee/optee/supp.c +++ b/drivers/tee/optee/supp.c @@ -19,7 +19,7 @@ struct optee_supp_req { struct list_head link; - bool busy; + bool in_queue; u32 func; u32 ret; size_t num_params; @@ -54,7 +54,6 @@ void optee_supp_release(struct optee_supp *supp) /* Abort all request retrieved by supplicant */ idr_for_each_entry(&supp->idr, req, id) { - req->busy = false; idr_remove(&supp->idr, id); req->ret = TEEC_ERROR_COMMUNICATION; complete(&req->c); @@ -63,6 +62,7 @@ void optee_supp_release(struct optee_supp *supp) /* Abort all queued requests */ list_for_each_entry_safe(req, req_tmp, &supp->reqs, link) { list_del(&req->link); + req->in_queue = false; req->ret = TEEC_ERROR_COMMUNICATION; complete(&req->c); } @@ -103,6 +103,7 @@ u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params, /* Insert the request in the request list */ mutex_lock(&supp->mutex); list_add_tail(&req->link, &supp->reqs); + req->in_queue = true; mutex_unlock(&supp->mutex); /* Tell an eventual waiter there's a new request */ @@ -130,9 +131,10 @@ u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params, * will serve all requests in a timely manner and * interrupting then wouldn't make sense. */ - interruptable = !req->busy; - if (!req->busy) + if (req->in_queue) { list_del(&req->link); + req->in_queue = false; + } } mutex_unlock(&supp->mutex); @@ -176,7 +178,7 @@ static struct optee_supp_req *supp_pop_entry(struct optee_supp *supp, return ERR_PTR(-ENOMEM); list_del(&req->link); - req->busy = true; + req->in_queue = false; return req; } @@ -318,7 +320,6 @@ static struct optee_supp_req *supp_pop_req(struct optee_supp *supp, if ((num_params - nm) != req->num_params) return ERR_PTR(-EINVAL); - req->busy = false; idr_remove(&supp->idr, id); supp->req_id = -1; *num_meta = nm; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 32886c304641..67b9bf3b500e 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1529,6 +1529,25 @@ config SERIAL_OWL_CONSOLE Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART as the system console. +config SERIAL_RDA + bool "RDA Micro serial port support" + depends on ARCH_RDA || COMPILE_TEST + select SERIAL_CORE + help + This driver is for RDA8810PL SoC's UART. + Say 'Y' here if you wish to use the on-board serial port. + Otherwise, say 'N'. + +config SERIAL_RDA_CONSOLE + bool "Console on RDA Micro serial port" + depends on SERIAL_RDA=y + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + default y + help + Say 'Y' here if you wish to use the RDA8810PL UART as the system + console. Only earlycon is implemented currently. + endmenu config SERIAL_MCTRL_GPIO diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index daac675612df..8c303736b7e8 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -89,6 +89,7 @@ obj-$(CONFIG_SERIAL_MVEBU_UART) += mvebu-uart.o obj-$(CONFIG_SERIAL_PIC32) += pic32_uart.o obj-$(CONFIG_SERIAL_MPS2_UART) += mps2-uart.o obj-$(CONFIG_SERIAL_OWL) += owl-uart.o +obj-$(CONFIG_SERIAL_RDA) += rda-uart.o # GPIOLIB helpers for modem control lines obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c new file mode 100644 index 000000000000..284623eefaeb --- /dev/null +++ b/drivers/tty/serial/rda-uart.c @@ -0,0 +1,831 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * RDA8810PL serial device driver + * + * Copyright RDA Microelectronics Company Limited + * Copyright (c) 2017 Andreas Färber + * Copyright (c) 2018 Manivannan Sadhasivam + */ + +#include <linux/clk.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> + +#define RDA_UART_PORT_NUM 3 +#define RDA_UART_DEV_NAME "ttyRDA" + +#define RDA_UART_CTRL 0x00 +#define RDA_UART_STATUS 0x04 +#define RDA_UART_RXTX_BUFFER 0x08 +#define RDA_UART_IRQ_MASK 0x0c +#define RDA_UART_IRQ_CAUSE 0x10 +#define RDA_UART_IRQ_TRIGGERS 0x14 +#define RDA_UART_CMD_SET 0x18 +#define RDA_UART_CMD_CLR 0x1c + +/* UART_CTRL Bits */ +#define RDA_UART_ENABLE BIT(0) +#define RDA_UART_DBITS_8 BIT(1) +#define RDA_UART_TX_SBITS_2 BIT(2) +#define RDA_UART_PARITY_EN BIT(3) +#define RDA_UART_PARITY(x) (((x) & 0x3) << 4) +#define RDA_UART_PARITY_ODD RDA_UART_PARITY(0) +#define RDA_UART_PARITY_EVEN RDA_UART_PARITY(1) +#define RDA_UART_PARITY_SPACE RDA_UART_PARITY(2) +#define RDA_UART_PARITY_MARK RDA_UART_PARITY(3) +#define RDA_UART_DIV_MODE BIT(20) +#define RDA_UART_IRDA_EN BIT(21) +#define RDA_UART_DMA_EN BIT(22) +#define RDA_UART_FLOW_CNT_EN BIT(23) +#define RDA_UART_LOOP_BACK_EN BIT(24) +#define RDA_UART_RX_LOCK_ERR BIT(25) +#define RDA_UART_RX_BREAK_LEN(x) (((x) & 0xf) << 28) + +/* UART_STATUS Bits */ +#define RDA_UART_RX_FIFO(x) (((x) & 0x7f) << 0) +#define RDA_UART_RX_FIFO_MASK (0x7f << 0) +#define RDA_UART_TX_FIFO(x) (((x) & 0x1f) << 8) +#define RDA_UART_TX_FIFO_MASK (0x1f << 8) +#define RDA_UART_TX_ACTIVE BIT(14) +#define RDA_UART_RX_ACTIVE BIT(15) +#define RDA_UART_RX_OVERFLOW_ERR BIT(16) +#define RDA_UART_TX_OVERFLOW_ERR BIT(17) +#define RDA_UART_RX_PARITY_ERR BIT(18) +#define RDA_UART_RX_FRAMING_ERR BIT(19) +#define RDA_UART_RX_BREAK_INT BIT(20) +#define RDA_UART_DCTS BIT(24) +#define RDA_UART_CTS BIT(25) +#define RDA_UART_DTR BIT(28) +#define RDA_UART_CLK_ENABLED BIT(31) + +/* UART_RXTX_BUFFER Bits */ +#define RDA_UART_RX_DATA(x) (((x) & 0xff) << 0) +#define RDA_UART_TX_DATA(x) (((x) & 0xff) << 0) + +/* UART_IRQ_MASK Bits */ +#define RDA_UART_TX_MODEM_STATUS BIT(0) +#define RDA_UART_RX_DATA_AVAILABLE BIT(1) +#define RDA_UART_TX_DATA_NEEDED BIT(2) +#define RDA_UART_RX_TIMEOUT BIT(3) +#define RDA_UART_RX_LINE_ERR BIT(4) +#define RDA_UART_TX_DMA_DONE BIT(5) +#define RDA_UART_RX_DMA_DONE BIT(6) +#define RDA_UART_RX_DMA_TIMEOUT BIT(7) +#define RDA_UART_DTR_RISE BIT(8) +#define RDA_UART_DTR_FALL BIT(9) + +/* UART_IRQ_CAUSE Bits */ +#define RDA_UART_TX_MODEM_STATUS_U BIT(16) +#define RDA_UART_RX_DATA_AVAILABLE_U BIT(17) +#define RDA_UART_TX_DATA_NEEDED_U BIT(18) +#define RDA_UART_RX_TIMEOUT_U BIT(19) +#define RDA_UART_RX_LINE_ERR_U BIT(20) +#define RDA_UART_TX_DMA_DONE_U BIT(21) +#define RDA_UART_RX_DMA_DONE_U BIT(22) +#define RDA_UART_RX_DMA_TIMEOUT_U BIT(23) +#define RDA_UART_DTR_RISE_U BIT(24) +#define RDA_UART_DTR_FALL_U BIT(25) + +/* UART_TRIGGERS Bits */ +#define RDA_UART_RX_TRIGGER(x) (((x) & 0x1f) << 0) +#define RDA_UART_TX_TRIGGER(x) (((x) & 0xf) << 8) +#define RDA_UART_AFC_LEVEL(x) (((x) & 0x1f) << 16) + +/* UART_CMD_SET Bits */ +#define RDA_UART_RI BIT(0) +#define RDA_UART_DCD BIT(1) +#define RDA_UART_DSR BIT(2) +#define RDA_UART_TX_BREAK_CONTROL BIT(3) +#define RDA_UART_TX_FINISH_N_WAIT BIT(4) +#define RDA_UART_RTS BIT(5) +#define RDA_UART_RX_FIFO_RESET BIT(6) +#define RDA_UART_TX_FIFO_RESET BIT(7) + +#define RDA_UART_TX_FIFO_SIZE 16 + +static struct uart_driver rda_uart_driver; + +struct rda_uart_port { + struct uart_port port; + struct clk *clk; +}; + +#define to_rda_uart_port(port) container_of(port, struct rda_uart_port, port) + +static struct rda_uart_port *rda_uart_ports[RDA_UART_PORT_NUM]; + +static inline void rda_uart_write(struct uart_port *port, u32 val, + unsigned int off) +{ + writel(val, port->membase + off); +} + +static inline u32 rda_uart_read(struct uart_port *port, unsigned int off) +{ + return readl(port->membase + off); +} + +static unsigned int rda_uart_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned int ret; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + + val = rda_uart_read(port, RDA_UART_STATUS); + ret = (val & RDA_UART_TX_FIFO_MASK) ? TIOCSER_TEMT : 0; + + spin_unlock_irqrestore(&port->lock, flags); + + return ret; +} + +static unsigned int rda_uart_get_mctrl(struct uart_port *port) +{ + unsigned int mctrl = 0; + u32 cmd_set, status; + + cmd_set = rda_uart_read(port, RDA_UART_CMD_SET); + status = rda_uart_read(port, RDA_UART_STATUS); + if (cmd_set & RDA_UART_RTS) + mctrl |= TIOCM_RTS; + if (!(status & RDA_UART_CTS)) + mctrl |= TIOCM_CTS; + + return mctrl; +} + +static void rda_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 val; + + if (mctrl & TIOCM_RTS) { + val = rda_uart_read(port, RDA_UART_CMD_SET); + rda_uart_write(port, (val | RDA_UART_RTS), RDA_UART_CMD_SET); + } else { + /* Clear RTS to stop to receive. */ + val = rda_uart_read(port, RDA_UART_CMD_CLR); + rda_uart_write(port, (val | RDA_UART_RTS), RDA_UART_CMD_CLR); + } + + val = rda_uart_read(port, RDA_UART_CTRL); + + if (mctrl & TIOCM_LOOP) + val |= RDA_UART_LOOP_BACK_EN; + else + val &= ~RDA_UART_LOOP_BACK_EN; + + rda_uart_write(port, val, RDA_UART_CTRL); +} + +static void rda_uart_stop_tx(struct uart_port *port) +{ + u32 val; + + val = rda_uart_read(port, RDA_UART_IRQ_MASK); + val &= ~RDA_UART_TX_DATA_NEEDED; + rda_uart_write(port, val, RDA_UART_IRQ_MASK); + + val = rda_uart_read(port, RDA_UART_CMD_SET); + val |= RDA_UART_TX_FIFO_RESET; + rda_uart_write(port, val, RDA_UART_CMD_SET); +} + +static void rda_uart_stop_rx(struct uart_port *port) +{ + u32 val; + + val = rda_uart_read(port, RDA_UART_IRQ_MASK); + val &= ~(RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT); + rda_uart_write(port, val, RDA_UART_IRQ_MASK); + + /* Read Rx buffer before reset to avoid Rx timeout interrupt */ + val = rda_uart_read(port, RDA_UART_RXTX_BUFFER); + + val = rda_uart_read(port, RDA_UART_CMD_SET); + val |= RDA_UART_RX_FIFO_RESET; + rda_uart_write(port, val, RDA_UART_CMD_SET); +} + +static void rda_uart_start_tx(struct uart_port *port) +{ + u32 val; + + if (uart_tx_stopped(port)) { + rda_uart_stop_tx(port); + return; + } + + val = rda_uart_read(port, RDA_UART_IRQ_MASK); + val |= RDA_UART_TX_DATA_NEEDED; + rda_uart_write(port, val, RDA_UART_IRQ_MASK); +} + +static void rda_uart_change_baudrate(struct rda_uart_port *rda_port, + unsigned long baud) +{ + clk_set_rate(rda_port->clk, baud * 8); +} + +static void rda_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct rda_uart_port *rda_port = to_rda_uart_port(port); + unsigned long flags; + unsigned int ctrl, cmd_set, cmd_clr, triggers; + unsigned int baud; + u32 irq_mask; + + spin_lock_irqsave(&port->lock, flags); + + baud = uart_get_baud_rate(port, termios, old, 9600, port->uartclk / 4); + rda_uart_change_baudrate(rda_port, baud); + + ctrl = rda_uart_read(port, RDA_UART_CTRL); + cmd_set = rda_uart_read(port, RDA_UART_CMD_SET); + cmd_clr = rda_uart_read(port, RDA_UART_CMD_CLR); + + switch (termios->c_cflag & CSIZE) { + case CS5: + case CS6: + dev_warn(port->dev, "bit size not supported, using 7 bits\n"); + /* Fall through */ + case CS7: + ctrl &= ~RDA_UART_DBITS_8; + break; + default: + ctrl |= RDA_UART_DBITS_8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + ctrl |= RDA_UART_TX_SBITS_2; + else + ctrl &= ~RDA_UART_TX_SBITS_2; + + /* parity check */ + if (termios->c_cflag & PARENB) { + ctrl |= RDA_UART_PARITY_EN; + + /* Mark or Space parity */ + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + ctrl |= RDA_UART_PARITY_MARK; + else + ctrl |= RDA_UART_PARITY_SPACE; + } else if (termios->c_cflag & PARODD) { + ctrl |= RDA_UART_PARITY_ODD; + } else { + ctrl |= RDA_UART_PARITY_EVEN; + } + } else { + ctrl &= ~RDA_UART_PARITY_EN; + } + + /* Hardware handshake (RTS/CTS) */ + if (termios->c_cflag & CRTSCTS) { + ctrl |= RDA_UART_FLOW_CNT_EN; + cmd_set |= RDA_UART_RTS; + } else { + ctrl &= ~RDA_UART_FLOW_CNT_EN; + cmd_clr |= RDA_UART_RTS; + } + + ctrl |= RDA_UART_ENABLE; + ctrl &= ~RDA_UART_DMA_EN; + + triggers = (RDA_UART_AFC_LEVEL(20) | RDA_UART_RX_TRIGGER(16)); + irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK); + rda_uart_write(port, 0, RDA_UART_IRQ_MASK); + + rda_uart_write(port, triggers, RDA_UART_IRQ_TRIGGERS); + rda_uart_write(port, ctrl, RDA_UART_CTRL); + rda_uart_write(port, cmd_set, RDA_UART_CMD_SET); + rda_uart_write(port, cmd_clr, RDA_UART_CMD_CLR); + + rda_uart_write(port, irq_mask, RDA_UART_IRQ_MASK); + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void rda_uart_send_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int ch; + u32 val; + + if (uart_tx_stopped(port)) + return; + + if (port->x_char) { + while (!(rda_uart_read(port, RDA_UART_STATUS) & + RDA_UART_TX_FIFO_MASK)) + cpu_relax(); + + rda_uart_write(port, port->x_char, RDA_UART_RXTX_BUFFER); + port->icount.tx++; + port->x_char = 0; + } + + while (rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK) { + if (uart_circ_empty(xmit)) + break; + + ch = xmit->buf[xmit->tail]; + rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER); + xmit->tail = (xmit->tail + 1) & (SERIAL_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (!uart_circ_empty(xmit)) { + /* Re-enable Tx FIFO interrupt */ + val = rda_uart_read(port, RDA_UART_IRQ_MASK); + val |= RDA_UART_TX_DATA_NEEDED; + rda_uart_write(port, val, RDA_UART_IRQ_MASK); + } +} + +static void rda_uart_receive_chars(struct uart_port *port) +{ + u32 status, val; + + status = rda_uart_read(port, RDA_UART_STATUS); + while ((status & RDA_UART_RX_FIFO_MASK)) { + char flag = TTY_NORMAL; + + if (status & RDA_UART_RX_PARITY_ERR) { + port->icount.parity++; + flag = TTY_PARITY; + } + + if (status & RDA_UART_RX_FRAMING_ERR) { + port->icount.frame++; + flag = TTY_FRAME; + } + + if (status & RDA_UART_RX_OVERFLOW_ERR) { + port->icount.overrun++; + flag = TTY_OVERRUN; + } + + val = rda_uart_read(port, RDA_UART_RXTX_BUFFER); + val &= 0xff; + + port->icount.rx++; + tty_insert_flip_char(&port->state->port, val, flag); + + status = rda_uart_read(port, RDA_UART_STATUS); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(&port->state->port); + spin_lock(&port->lock); +} + +static irqreturn_t rda_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long flags; + u32 val, irq_mask; + + spin_lock_irqsave(&port->lock, flags); + + /* Clear IRQ cause */ + val = rda_uart_read(port, RDA_UART_IRQ_CAUSE); + rda_uart_write(port, val, RDA_UART_IRQ_CAUSE); + + if (val & (RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT)) + rda_uart_receive_chars(port); + + if (val & (RDA_UART_TX_DATA_NEEDED)) { + irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK); + irq_mask &= ~RDA_UART_TX_DATA_NEEDED; + rda_uart_write(port, irq_mask, RDA_UART_IRQ_MASK); + + rda_uart_send_chars(port); + } + + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static int rda_uart_startup(struct uart_port *port) +{ + unsigned long flags; + int ret; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + rda_uart_write(port, 0, RDA_UART_IRQ_MASK); + spin_unlock_irqrestore(&port->lock, flags); + + ret = request_irq(port->irq, rda_interrupt, IRQF_NO_SUSPEND, + "rda-uart", port); + if (ret) + return ret; + + spin_lock_irqsave(&port->lock, flags); + + val = rda_uart_read(port, RDA_UART_CTRL); + val |= RDA_UART_ENABLE; + rda_uart_write(port, val, RDA_UART_CTRL); + + /* enable rx interrupt */ + val = rda_uart_read(port, RDA_UART_IRQ_MASK); + val |= (RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT); + rda_uart_write(port, val, RDA_UART_IRQ_MASK); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void rda_uart_shutdown(struct uart_port *port) +{ + unsigned long flags; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + + rda_uart_stop_tx(port); + rda_uart_stop_rx(port); + + val = rda_uart_read(port, RDA_UART_CTRL); + val &= ~RDA_UART_ENABLE; + rda_uart_write(port, val, RDA_UART_CTRL); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *rda_uart_type(struct uart_port *port) +{ + return (port->type == PORT_RDA) ? "rda-uart" : NULL; +} + +static int rda_uart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + if (!devm_request_mem_region(port->dev, port->mapbase, + resource_size(res), dev_name(port->dev))) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = devm_ioremap_nocache(port->dev, port->mapbase, + resource_size(res)); + if (!port->membase) + return -EBUSY; + } + + return 0; +} + +static void rda_uart_config_port(struct uart_port *port, int flags) +{ + unsigned long irq_flags; + + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_RDA; + rda_uart_request_port(port); + } + + spin_lock_irqsave(&port->lock, irq_flags); + + /* Clear mask, so no surprise interrupts. */ + rda_uart_write(port, 0, RDA_UART_IRQ_MASK); + + /* Clear status register */ + rda_uart_write(port, 0, RDA_UART_STATUS); + + spin_unlock_irqrestore(&port->lock, irq_flags); +} + +static void rda_uart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return; + + if (port->flags & UPF_IOREMAP) { + devm_release_mem_region(port->dev, port->mapbase, + resource_size(res)); + devm_iounmap(port->dev, port->membase); + port->membase = NULL; + } +} + +static int rda_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (port->type != PORT_RDA) + return -EINVAL; + + if (port->irq != ser->irq) + return -EINVAL; + + return 0; +} + +static const struct uart_ops rda_uart_ops = { + .tx_empty = rda_uart_tx_empty, + .get_mctrl = rda_uart_get_mctrl, + .set_mctrl = rda_uart_set_mctrl, + .start_tx = rda_uart_start_tx, + .stop_tx = rda_uart_stop_tx, + .stop_rx = rda_uart_stop_rx, + .startup = rda_uart_startup, + .shutdown = rda_uart_shutdown, + .set_termios = rda_uart_set_termios, + .type = rda_uart_type, + .request_port = rda_uart_request_port, + .release_port = rda_uart_release_port, + .config_port = rda_uart_config_port, + .verify_port = rda_uart_verify_port, +}; + +#ifdef CONFIG_SERIAL_RDA_CONSOLE + +static void rda_console_putchar(struct uart_port *port, int ch) +{ + if (!port->membase) + return; + + while (!(rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK)) + cpu_relax(); + + rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER); +} + +static void rda_uart_port_write(struct uart_port *port, const char *s, + u_int count) +{ + u32 old_irq_mask; + unsigned long flags; + int locked; + + local_irq_save(flags); + + if (port->sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else { + spin_lock(&port->lock); + locked = 1; + } + + old_irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK); + rda_uart_write(port, 0, RDA_UART_IRQ_MASK); + + uart_console_write(port, s, count, rda_console_putchar); + + /* wait until all contents have been sent out */ + while (!(rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK)) + cpu_relax(); + + rda_uart_write(port, old_irq_mask, RDA_UART_IRQ_MASK); + + if (locked) + spin_unlock(&port->lock); + + local_irq_restore(flags); +} + +static void rda_uart_console_write(struct console *co, const char *s, + u_int count) +{ + struct rda_uart_port *rda_port; + + rda_port = rda_uart_ports[co->index]; + if (!rda_port) + return; + + rda_uart_port_write(&rda_port->port, s, count); +} + +static int rda_uart_console_setup(struct console *co, char *options) +{ + struct rda_uart_port *rda_port; + int baud = 921600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= RDA_UART_PORT_NUM) + return -EINVAL; + + rda_port = rda_uart_ports[co->index]; + if (!rda_port || !rda_port->port.membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&rda_port->port, co, baud, parity, bits, flow); +} + +static struct console rda_uart_console = { + .name = RDA_UART_DEV_NAME, + .write = rda_uart_console_write, + .device = uart_console_device, + .setup = rda_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &rda_uart_driver, +}; + +static int __init rda_uart_console_init(void) +{ + register_console(&rda_uart_console); + + return 0; +} +console_initcall(rda_uart_console_init); + +static void rda_uart_early_console_write(struct console *co, + const char *s, + u_int count) +{ + struct earlycon_device *dev = co->data; + + rda_uart_port_write(&dev->port, s, count); +} + +static int __init +rda_uart_early_console_setup(struct earlycon_device *device, const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = rda_uart_early_console_write; + + return 0; +} + +OF_EARLYCON_DECLARE(rda, "rda,8810pl-uart", + rda_uart_early_console_setup); + +#define RDA_UART_CONSOLE (&rda_uart_console) +#else +#define RDA_UART_CONSOLE NULL +#endif /* CONFIG_SERIAL_RDA_CONSOLE */ + +static struct uart_driver rda_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "rda-uart", + .dev_name = RDA_UART_DEV_NAME, + .nr = RDA_UART_PORT_NUM, + .cons = RDA_UART_CONSOLE, +}; + +static const struct of_device_id rda_uart_dt_matches[] = { + { .compatible = "rda,8810pl-uart" }, + { } +}; +MODULE_DEVICE_TABLE(of, rda_uart_dt_matches); + +static int rda_uart_probe(struct platform_device *pdev) +{ + struct resource *res_mem; + struct rda_uart_port *rda_port; + int ret, irq; + + if (pdev->dev.of_node) + pdev->id = of_alias_get_id(pdev->dev.of_node, "serial"); + + if (pdev->id < 0 || pdev->id >= RDA_UART_PORT_NUM) { + dev_err(&pdev->dev, "id %d out of range\n", pdev->id); + return -EINVAL; + } + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) { + dev_err(&pdev->dev, "could not get mem\n"); + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "could not get irq\n"); + return irq; + } + + if (rda_uart_ports[pdev->id]) { + dev_err(&pdev->dev, "port %d already allocated\n", pdev->id); + return -EBUSY; + } + + rda_port = devm_kzalloc(&pdev->dev, sizeof(*rda_port), GFP_KERNEL); + if (!rda_port) + return -ENOMEM; + + rda_port->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(rda_port->clk)) { + dev_err(&pdev->dev, "could not get clk\n"); + return PTR_ERR(rda_port->clk); + } + + rda_port->port.dev = &pdev->dev; + rda_port->port.regshift = 0; + rda_port->port.line = pdev->id; + rda_port->port.type = PORT_RDA; + rda_port->port.iotype = UPIO_MEM; + rda_port->port.mapbase = res_mem->start; + rda_port->port.irq = irq; + rda_port->port.uartclk = clk_get_rate(rda_port->clk); + if (rda_port->port.uartclk == 0) { + dev_err(&pdev->dev, "clock rate is zero\n"); + return -EINVAL; + } + rda_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | + UPF_LOW_LATENCY; + rda_port->port.x_char = 0; + rda_port->port.fifosize = RDA_UART_TX_FIFO_SIZE; + rda_port->port.ops = &rda_uart_ops; + + rda_uart_ports[pdev->id] = rda_port; + platform_set_drvdata(pdev, rda_port); + + ret = uart_add_one_port(&rda_uart_driver, &rda_port->port); + if (ret) + rda_uart_ports[pdev->id] = NULL; + + return ret; +} + +static int rda_uart_remove(struct platform_device *pdev) +{ + struct rda_uart_port *rda_port = platform_get_drvdata(pdev); + + uart_remove_one_port(&rda_uart_driver, &rda_port->port); + rda_uart_ports[pdev->id] = NULL; + + return 0; +} + +static struct platform_driver rda_uart_platform_driver = { + .probe = rda_uart_probe, + .remove = rda_uart_remove, + .driver = { + .name = "rda-uart", + .of_match_table = rda_uart_dt_matches, + }, +}; + +static int __init rda_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&rda_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&rda_uart_platform_driver); + if (ret) + uart_unregister_driver(&rda_uart_driver); + + return ret; +} + +static void __init rda_uart_exit(void) +{ + platform_driver_unregister(&rda_uart_platform_driver); + uart_unregister_driver(&rda_uart_driver); +} + +module_init(rda_uart_init); +module_exit(rda_uart_exit); + +MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); +MODULE_DESCRIPTION("RDA8810PL serial device driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/pl353-smc.h b/include/linux/pl353-smc.h new file mode 100644 index 000000000000..0e0d3df9bf72 --- /dev/null +++ b/include/linux/pl353-smc.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ARM PL353 SMC Driver Header + * + * Copyright (C) 2012 - 2018 Xilinx, Inc + */ + +#ifndef __LINUX_PL353_SMC_H +#define __LINUX_PL353_SMC_H + +enum pl353_smc_ecc_mode { + PL353_SMC_ECCMODE_BYPASS = 0, + PL353_SMC_ECCMODE_APB = 1, + PL353_SMC_ECCMODE_MEM = 2 +}; + +enum pl353_smc_mem_width { + PL353_SMC_MEM_WIDTH_8 = 0, + PL353_SMC_MEM_WIDTH_16 = 1 +}; + +u32 pl353_smc_get_ecc_val(int ecc_reg); +bool pl353_smc_ecc_is_busy(void); +int pl353_smc_get_nand_int_status_raw(void); +void pl353_smc_clr_nand_int(void); +int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode); +int pl353_smc_set_ecc_pg_size(unsigned int pg_sz); +int pl353_smc_set_buswidth(unsigned int bw); +void pl353_smc_set_cycles(u32 timings[]); +#endif diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h index 06996ad4f2bc..1637385bcc17 100644 --- a/include/linux/qcom_scm.h +++ b/include/linux/qcom_scm.h @@ -67,6 +67,9 @@ extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare); extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val); extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val); #else + +#include <linux/errno.h> + static inline int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) { diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index dce5f9dae121..df4a7534e239 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -281,4 +281,7 @@ /* MediaTek BTIF */ #define PORT_MTK_BTIF 117 +/* RDA UART */ +#define PORT_RDA 118 + #endif /* _UAPILINUX_SERIAL_CORE_H */ |