| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Introduce the `dphy_late_init` callback in `rzg2l_mipi_dsi_hw_info` to
allow additional D-PHY register configurations after enabling data and
clock lanes. This is required for the RZ/V2H(P) SoC but not for the
RZ/G2L SoC.
Modify `rzg2l_mipi_dsi_startup()` to invoke `dphy_late_init` if defined,
ensuring SoC-specific initialization is performed only when necessary.
This change prepares for RZ/V2H(P) SoC support while maintaining
compatibility with existing platforms.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-9-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Introduce the `RZ_MIPI_DSI_FEATURE_16BPP` flag in `rzg2l_mipi_dsi_hw_info`
to indicate support for 16BPP pixel formats. The RZ/V2H(P) SoC supports
16BPP, whereas this feature is missing on the RZ/G2L SoC.
Update the `mipi_dsi_host_attach()` function to check this flag before
allowing 16BPP formats. If the SoC does not support 16BPP, return an error
to prevent incorrect format selection.
This change enables finer-grained format support control for different
SoC variants.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-8-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Pass the HSFREQ in milli-Hz to the `dphy_init()` callback to improve
precision, especially for the RZ/V2H(P) SoC, where PLL dividers require
high accuracy.
These changes prepare the driver for upcoming RZ/V2H(P) SoC support.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-7-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
In preparation for adding support for the Renesas RZ/V2H(P) SoC, make the
"rst" reset control optional in the MIPI DSI driver. The RZ/V2H(P) SoC
does not provide this reset line, and attempting to acquire it using the
mandatory API causes probe failure.
Switching to devm_reset_control_get_optional_exclusive() ensures
compatibility with both SoCs that provide this reset line and those that
do not, such as RZ/V2H(P).
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-6-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
n preparation for adding support for the Renesas RZ/V2H(P) SoC, this patch
introduces a mechanism to pass SoC-specific information via OF data in the
DSI driver. This enables the driver to adapt dynamically to various
SoC-specific requirements without hardcoding configurations.
The MIPI DSI interface on the RZ/V2H(P) SoC is nearly identical to the one
on the RZ/G2L SoC. While the LINK registers are shared between the two
SoCs, the D-PHY registers differ. Also the VCLK range differs on both these
SoCs. To accommodate these differences `struct rzg2l_mipi_dsi_hw_info` is
introduced and as now passed as OF data.
These changes lay the groundwork for the upcoming RZ/V2H(P) SoC support by
allowing SoC-specific data to be passed through OF.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-5-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Update the RZ/G2L MIPI DSI driver to calculate HSFREQ using the actual
VCLK rate instead of the mode clock. The relationship between HSCLK and
VCLK is:
vclk * bpp <= hsclk * 8 * lanes
Retrieve the VCLK rate using `clk_get_rate(dsi->vclk)`, ensuring that
HSFREQ accurately reflects the clock rate set in hardware, leading to
better precision in data transmission.
Additionally, use `DIV_ROUND_CLOSEST_ULL` for a more precise division
when computing `hsfreq`. Also, update unit conversions to use correct
scaling factors for better clarity and correctness.
Since `clk_get_rate()` returns the clock rate in Hz, update the HSFREQ
threshold comparisons to use Hz instead of kHz to ensure correct behavior.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-4-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Simplify the high-speed clock frequency (HSFREQ) calculation by removing
the redundant multiplication and division by 8. The updated equation:
hsfreq = mode->clock * bpp / dsi->lanes;
produces the same result while improving readability and clarity.
Additionally, update the comment to clarify the relationship between HS
clock bit frequency, HS byte clock frequency, and HSFREQ.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-3-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
The VCLK range for Renesas RZ/G2L SoC is 5.803 MHz to 148.5 MHz. Add a
minimum clock check in the mode_valid callback to ensure that the clock
value does not fall below the valid range.
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250609225630.502888-2-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
The thread sanitizer makes the stack usage explode from extra variable
spills in dispc_runtime_resume:
drivers/gpu/drm/omapdrm/dss/dispc.c:4735:27: error: stack frame size (1824) exceeds limit (1280) in 'dispc_runtime_resume' [-Werror,-Wframe-larger-than]
I could not figure out what exactly is going on here, but I see that
whenever dispc_restore_context() is not inlined, that function
and its caller shrink below 900 bytes combined of stack usage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250610092737.2641862-1-arnd@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
This was added by Sima +10 years ago as a solution to avoid exporting
multiple dma-bufs for the same GEM object. I tried to remove it before,
but wasn't 100% sure about all the side effects.
Now Thomas recent modified drm_gem_prime_handle_to_dmabuf() which makes
it obvious that this is a superflous step. We try to look up the DMA-buf
by handle handle and if that fails for some reason (must likely because
the handle is a duplicate) the code just use the DMA-buf from the GEM
object.
Just using the DMA-buf from the GEM object in the first place has the
same effect as far as I can see.
Some more history from Sima:
In d0b2c5334f41 ("drm/prime: Always add exported buffers to the handle
cache") I added this additional lookup. It wasn't part of the bugfix,
but back then the handle list was just a linked list and you could do
lookups in either direction. And I guess I felt like doing a quick lookup
before we grab the next lock makes sense. Premature optimization, I'm
confessing to the crime guilty as charged :-/
Then Chris Wilson in 077675c1e8a1 ("drm: Convert prime dma-buf <-> handle
to rbtree") and added 2 rb trees to support both directions. At that point
that handle2buf lookup really didn't make much sense anymore, but we just
kept it and it's been in the tree confusing people ever since.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250604113234.2520-1-christian.koenig@amd.com
|
|
Add client id to the drm_file_error api, client id
is a unique id for each drm fd and is quite useful
for debugging.
v2: Swapped client id and client name order [Chrisitan]
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250530062929.1954784-1-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
pci_printk() was removed with commit 1c8a0ed2043c ("PCI: Remove unused pci_printk()")
so change to using dev_printk().
Fixes: c11a50b170e7 ("accel/qaic: Add Reliability, Accessibility, Serviceability (RAS)")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20250610124809.1e1ff0cd@canb.auug.org.au/
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Troy Hanson <quic_thanson@quicinc.com>
Link: https://lore.kernel.org/r/20250610175912.2086773-1-jeff.hugo@oss.qualcomm.com
|
|
For the evict fail case, the evict error should be returned.
v2: Consider ENOENT case.
v3: Abort directly when the eviction failed for some reason (except for -ENOENT)
and not wait for the move to finish
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250603091154.3472646-1-Emily.Deng@amd.com
|
|
If the panel is enabled at probe, and we take over the hardware state,
the drm_panel prepared state will be out of sync. We'll need to notify
drm_panel framework about the state at probe, so it can in turn notify
the panel followers.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/a33e4fe5e9970aed9c4aef8c426c00a189149c32.1749199013.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Allocate and register a drm_panel so that drm_panel_followers can find
the panel. Pass the drm_connector::kdev device to drm_panel allocation
for matching. That's only available after drm_sysfs_connector_add(), so
we need to postpone the drm_panel allocation until .late_register()
hook.
The drm_panel framework is moving towards devm_drm_panel_alloc(). It
requires a wrapper struct, and struct intel_panel would be the natural
candidate. However, we can't postpone its allocation until
.late_register(), so we have to use __devm_drm_panel_alloc() directly
for now.
Call the drm_panel_prepare() and drm_panel_unprepare() functions for
ICL+ DSI, so that followers get notified of the panel power state
changes. This can later be expanded to VLV+ DSI and eDP.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/13d15c1414e65ffb21944d66e2820befdab54e98.1749199013.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add panel register/unregister functions, and handle backlight
register/unregister from there. This is in preparation for adding more
panel specific register/unregister functionality.
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/b737d4bc8b91df630cd4db4648f3a3571989cfd8.1749199013.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use firmware node based lookups for panel followers, to make the code
independent of OF and device tree, and make it work also for ACPI with
an appropriate _DSD.
ASL example:
Package (0x02)
{
"panel", \_SB.PCI0.GFX0.LCD0
}
v2:
- Update comments (Doug, Arun)
- s/IS_ERR_OR_NULL/IS_ERR/ (Doug)
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250610094132.3240567-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Map DRM FourCC codes to pixel descriptions with an internal struct
type. Avoid simplefb's struct simplefb_format, which is for parsing
"simple-framebuffer" DT nodes. Drop the unsupported formats with
alpha channel from the list.
The HDLCD drivers uses struct simplefb_format and its default
initializer SIMPLEFB_FORMATS to map DRM_FORMAT_ constants to pixel
descriptions. The simplefb helpers are for parsing "simple-framebuffer"
DT nodes and should be avoided in other context. Therefore replace it
in hdlcd with a custom struct type and pixel descriptions from
PIXEL_FORMAT_ constants.
This change also removes including <linux/platform_data/simplefb.h>,
which includes several unrelated headers, such as <linux/fb.h>.
v2:
- drop unsupported alpha formats (Liviu)
- keep original sorting of formats (Javier)
- use anonymous type for supported_formats
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20250610073027.322944-1-tzimmermann@suse.de
|
|
Backmerging to forward to v6.16-rc1
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Add configuration for the 7" Raspberry Pi 720x1280 DSI panel
based on ili9881.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250608142908.54121-3-marek.vasut+renesas@mailbox.org
|
|
Not all panels use all 4 data lanes, so allow configuration based
on the compatible string.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250608142908.54121-2-marek.vasut+renesas@mailbox.org
|
|
The Winstar wf40eswaa6mnn0 panel is a square 4.0" TFT LCD with a
resolution of 480x480 pixels.
This panel is driven by the Sitronix ST7701 controller and uses a MIPI
DSI interface. The settings are based on the panel's datasheet and the
init sequence provided by Winstar.
It was tested on a Verdin iMX8MP from Toradex with a Carrier Board
providing a MIPI DSI interface.
Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250606114644.105371-2-eichest@gmail.com
|
|
Add support for another variant of the rm69299 panel. This panel is
1080x2160 and is found in the shift-axolotl (SHIFT6mq).
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
[narmstrong: moved to panel_desc]
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250509-topic-misc-shift6-panel-v2-6-c2c2d52abd51@linaro.org
|
|
Switch to devm_regulator_bulk_get_const() to move the supply
data to const.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250509-topic-misc-shift6-panel-v2-4-c2c2d52abd51@linaro.org
|
|
Switch to the DSI _multi variants to simplify error handling.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250509-topic-misc-shift6-panel-v2-3-c2c2d52abd51@linaro.org
|
|
In order to support a panel variant, add plumbing code to pass
init sequence and mode as compatible data.
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250509-topic-misc-shift6-panel-v2-2-c2c2d52abd51@linaro.org
|
|
Add support for sending MIPI DSI command packets from the host to a
peripheral. This is required for panels that need configuration before
they accept video data.
Also for long reads to work properly, set DCS maximum return packet size
to the value of the DMA buffer size.
Based on Renesas Linux kernel v5.10 repos [1].
Link: https://github.com/renesas-rz/rz_linux-cip.git
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250604145306.1170676-2-hugo@hugovil.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the PCI/MSI code:
The conversion to per device MSI domains created a MSI domain with
size 1 instead of sizing it to the maximum possible number of MSI
interrupts for the device. This "worked" as the subsequent allocations
resized the domain, but the recent change to move the prepare() call
into the domain creation path broke this works by chance mechanism.
Size the domain properly at creation time"
* tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Size device MSI domain with the maximum number of vectors
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Adjust the 'make install' operation
- Support SCHED_MC (Multi-core scheduler)
- Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
- Enable HAVE_ARCH_STACKLEAK
- Increase max supported CPUs up to 2048
- Introduce the numa_memblks conversion
- Add PWM controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Unregister generic_sub_drivers on exit
platform/loongarch: laptop: Add backlight power control support
platform/loongarch: laptop: Get brightness setting from EC on probe
LoongArch: dts: Add PWM support to Loongson-2K2000
LoongArch: dts: Add PWM support to Loongson-2K1000
LoongArch: dts: Add PWM support to Loongson-2K0500
LoongArch: vDSO: Correctly use asm parameters in syscall wrappers
LoongArch: Fix panic caused by NULL-PMD in huge_pte_offset()
LoongArch: Preserve firmware configuration when desired
LoongArch: Avoid using $r0/$r1 as "mask" for csrxchg
LoongArch: Introduce the numa_memblks conversion
LoongArch: Increase max supported CPUs up to 2048
LoongArch: Enable HAVE_ARCH_STACKLEAK
LoongArch: Enable ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
LoongArch: Add SCHED_MC (Multi-core scheduler) support
LoongArch: Add some annotations in archhelp
LoongArch: Using generic scripts/install.sh in `make install`
LoongArch: Add a default install.sh
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fix patches for the 6.16-rc1 merge window.
Most of changes are about ASoC, especially lots of AVS driver fixes.
Larger LOCs are seen in TAS571x codec drivers, but the changes are
trivial and safe. The rest are all device-specific small fixes"
* tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ASoC: Intel: avs: boards: Fix rt5663 front end name
ASoC: Intel: avs: Simplify verification of parse_int_array() result
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
ALSA: hda: Ignore unsol events for cards being shut down
ALSA: hda: Add new pci id for AMD GPU display HD audio controller
ALSA: hda: cs35l41: Constify regmap_irq_chip
ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
ASoC: pcm: Do not open FEs with no BEs connected
ASoC: rt1320: fix speaker noise when volume bar is 100%
ASoC: Intel: avs: Include missing string.h
ASoC: Intel: avs: Verify content returned by parse_int_array()
ASoC: Intel: avs: Verify kcalloc() status when setting constraints
ASoC: Intel: avs: Fix paths in MODULE_FIRMWARE hints
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
ASoC: Intel: avs: Fix PPLCxFMT calculation
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
ASoC: codecs: hda: Fix RPM usage count underflow
ASoC: amd: yc: Add support for Lenovo Yoga 7 16ARP8
ASoC: tas571x: fix tas5733 num_controls
...
|
|
Without correct unregisteration, ACPI notify handlers and the platform
drivers installed by generic_subdriver_init() will become dangling
references after removing the loongson_laptop module, triggering various
kernel faults when a hotkey is sent or at kernel shutdown.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
loongson_laptop_turn_{on,off}_backlight() are designed for controlling
the power of the backlight, but they aren't really used in the driver
previously.
Unify these two functions since they only differ in arguments passed to
ACPI method, and wire up loongson_laptop_backlight_update() to update
the power state of the backlight as well. Tested on the TongFang L860-T2
Loongson-3A5000 laptop.
Cc: stable@vger.kernel.org
Fixes: 6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Pull SCSI fixes from James Bottomley:
"Mostly trivial updates and bug fixes (core update is a comment
spelling fix).
The bigger UFS update is the clock scaling and frequency fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Prevent calling phy_exit() before phy_init()
scsi: ufs: qcom: Call ufs_qcom_cfg_timers() in clock scaling path
scsi: ufs: qcom: Map devfreq OPP freq to UniPro Core Clock freq
scsi: ufs: qcom: Check gear against max gear in vop freq_to_gear()
scsi: aacraid: Remove useless code
scsi: core: devinfo: Fix typo in comment
scsi: ufs: core: Don't perform UFS clkscaling during host async scan
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Add missing select CRYPTO_ENGINE to CRYPTO_PAES_S390
- Fix secure storage access exception handling when fault handling is
disabled
* tag 's390-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: Fix in_atomic() handling in do_secure_storage_access()
s390/crypto: Select crypto engine in Kconfig when PAES is chosen
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull more spi updates from Mark Brown:
"A small set of updates that came in during the merge window, we've
got:
- Some small fixes for the Broadcom and spi-pci1xxxx drivers
- A change to the QPIC SNAND driver to flag that the error correction
features are less useful than people might be expecting
- A new device ID for the SOPHGO SG2042
- The addition of Yang Shen as a Huawei maintainer"
* tag 'spi-v6.16-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qpic-snand: document the limited bit error reporting capability
spi: bcm63xx-hsspi: fix shared reset
spi: bcm63xx-spi: fix shared reset
MAINTAINERS: Update HiSilicon SFC driver maintainer
MAINTAINERS: Update HiSilicon SPI Controller driver maintainer
spi: dt-bindings: spi-sg2044-nor: Add SOPHGO SG2042
spi: spi-pci1xxxx: Fix Probe failure with Dual SPI instance with INTx interrupts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A very minor fix that came in during the merge window, checking for
I/O errors in the MAX14577 driver"
* tag 'regulator-fix-v6.16-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max14577: Add error check for max14577_read_reg()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"axi-pwmgen: Fix handling of external clock
The pwm-axi-pwmgen device is backed by an FPGA and can be synthesized
in different ways. Relevant here is that it can use one or two
external clock signals. These fix clock handling for the two clocks
case"
* tag 'pwm/for-6.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: fix missing separate external clock
dt-bindings: pwm: adi,axi-pwmgen: Fix clocks
|
|
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.16-rc1.
A little more churn than normal in this portion of the kernel for this
development cycle, Jiri and Nicholas were busy with cleanups and
reviews and fixes for the vt unicode handling logic which composed
most of the overall work in here.
Major changes are:
- vt unicode changes/reverts/changes from Nicholas. This should help
out a lot with screen readers and others that rely on vt console
support
- lock guard additions to the core tty/serial code to clean up lots
of error handling logic
- 8250 driver updates and fixes
- device tree conversions to yaml
- sh-sci driver updates
- other small cleanups and updates for serial drivers and tty core
portions
All of these have been in linux-next for 2 weeks with no reported issues"
* tag 'tty-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (105 commits)
tty: serial: 8250_omap: fix TX with DMA for am33xx
vt: add VT_GETCONSIZECSRPOS to retrieve console size and cursor position
vt: bracketed paste support
vt: remove VT_RESIZE and VT_RESIZEX from vt_compat_ioctl()
vt: process the full-width ASCII fallback range programmatically
vt: make use of ucs_get_fallback() when glyph is unavailable
vt: add ucs_get_fallback()
vt: create ucs_fallback_table.h_shipped with gen_ucs_fallback_table.py
vt: introduce gen_ucs_fallback_table.py to create ucs_fallback_table.h
vt: move glyph determination to a separate function
vt: make sure displayed double-width characters are remembered as such
vt: ucs.c: fix misappropriate in_range() usage
serial: max3100: Replace open-coded parity calculation with parity8()
dt-bindings: serial: 8250_omap: Drop redundant properties
dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema
dt-bindings: serial: Convert microchip,pic32mzda-uart to DT schema
dt-bindings: serial: Convert arm,sbsa-uart to DT schema
dt-bindings: serial: Convert snps,arc-uart to DT schema
dt-bindings: serial: Convert marvell,armada-3700-uart to DT schema
dt-bindings: serial: Convert lantiq,asc to DT schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the "big" set of staging driver changes for 6.16-rc1. Included
in here are:
- gpib driver cleanups and updates.
This subsystem is _almost_ ready to be merged into the main portion
of the kernel tree. Hopefully should happen in the next kernel
merge cycle if all goes well.
- sm750fb driver cleanups
- rtl8723bs driver cleanups
- other small driver cleanups for coding style issues
All of these have been in for over 2 weeks with no reported issues"
* tag 'staging-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (203 commits)
staging: rtl8723bs: remove unnecessary braces for single statement blocks
staging: rtl8723bs: Removed multiple blank lines of rtw_pwrctrl.c
staging: sm750fb: rename `hw_sm750le_setBLANK`
staging: sm750fb: rename `hw_sm750_setBLANK`
staging: sm750fb: rename `hw_sm750_setColReg`
staging: sm750fb: rename `hw_sm750_crtc_setMode`
staging: sm750fb: rename `hw_sm750_crtc_checkMode`
staging: sm750fb: rename `hw_sm750_output_setMode`
staging: sm750fb: rename `hw_sm750le_deWait`
staging: sm750fb: rename `hw_sm750_deWait`
staging: sm750fb: rename `hw_sm750_initAccel`
staging: gpib: switch to kmalloc(sizeof(*status))
staging: gpib: Fix secondary address restriction
staging: gpib: Fix uapi include header guard name
staging: gpib: Avoid unused variable warning
staging: gpib: Declare driver entry points static
staging: gpib: Fix PCMCIA config identifier
staging: gpib: Avoid unused variable warnings
staging: gpib: Fix lpvo request_system_control
staging: sm750fb: rename sm750_hw_cursor_setData2
...
|
|
Pull more drm fixes from Simona Vetter:
"Another small batch of drm fixes, this time with a different baseline
and hence separate.
Drivers:
- ivpu:
- dma_resv locking
- warning fixes
- reset failure handling
- improve logging
- update fw file names
- fix cmdqueue unregister
- panel-simple: add Evervision VGG644804
Core Changes:
- sysfb: screen_info type check
- video: screen_info for relocated pci fb
- drm/sched: signal fence of killed job
- dummycon: deferred takeover fix"
* tag 'drm-fixes-2025-06-06' of https://gitlab.freedesktop.org/drm/kernel:
sysfb: Fix screen_info type check for VGA
video: screen_info: Relocate framebuffers behind PCI bridges
accel/ivpu: Fix warning in ivpu_gem_bo_free()
accel/ivpu: Trigger device recovery on engine reset/resume failure
accel/ivpu: Use dma_resv_lock() instead of a custom mutex
drm/panel-simple: fix the warnings for the Evervision VGG644804
accel/ivpu: Reorder Doorbell Unregister and Command Queue Destruction
accel/ivpu: Use firmware names from upstream repo
accel/ivpu: Improve buffer object logging
dummycon: Trigger redraw when switching consoles with deferred takeover
drm/scheduler: signal scheduled fence when kill job
|
|
Handles are per-file, not global, so this makes no sense. Plus it's
set only after calling drm_gem_handle_create(), and drivers are not
allowed to further initialize a bo after that function has published it
already.
It is also entirely unused, which helps enormously with removing it
:-)
Since we're still holding a reference to the bo nothing bad can
happen, hence not cc: stable material.
Cc: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Cc: Carl Vanderlip <quic_carlv@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250528091307.1894940-5-simona.vetter@ffwll.ch
|
|
Pull drm fixes from Dave Airlie:
"This is pretty much two weeks worth of fixes, plus one thing that
might be considered next: amdkfd is now able to be enabled on risc-v
platforms.
Otherwise, amdgpu and xe with the majority of fixes, and then a
smattering all over.
panel:
- nt37801: fix IS_ERR
- nt37801: fix KConfig
connector:
- Fix null deref in HDMI audio helper.
bridge:
- analogix_dp: fixup clk-disable removal
nouveau:
- minor typo fix (',' vs ';')
msm:
- mailmap updates
i915:
- Fix the enabling/disabling of DP audio SDP splitting
- Fix PSR register definitions for ALPM
- Fix u32 overflow in SNPS PHY HDMI PLL setup
- Fix GuC pending message underflow when submit fails
- Fix GuC wakeref underflow race during reset
xe:
- Two documentation fixes
- A couple of vm init fixes
- Hwmon fixes
- Drop reduntant conversion to bool
- Fix CONFIG_INTEL_VSEC dependency
- Rework eviction rejection of bound external bos
- Stop re-submitting signalled jobs
- A couple of pxp fixes
- Add back a fix that got lost in a merge
- Create LRC bo without VM
- Fix for the above fix
amdgpu:
- UserQ fixes
- SMU 13.x fixes
- VCN fixes
- JPEG fixes
- Misc cleanups
- runtime pm fix
- DCN 4.0.1 fixes
- Misc display fixes
- ISP fix
- VRAM manager fix
- RAS fixes
- IP discovery fix
- Cleaner shader fix for GC 10.1.x
- OD fix
- Non-OLED panel fix
- Misc display fixes
- Brightness fixes
amdkfd:
- Enable CONFIG_HSA_AMD on RISCV
- SVM fix
- Misc cleanups
- Ref leak fix
- WPTR BO fix
radeon:
- Misc cleanups"
* tag 'drm-next-2025-06-06' of https://gitlab.freedesktop.org/drm/kernel: (105 commits)
drm/nouveau/vfn/r535: Convert comma to semicolon
drm/xe: remove unmatched xe_vm_unlock() from __xe_exec_queue_init()
drm/xe: Create LRC BO without VM
drm/xe/guc_submit: add back fix
drm/xe/pxp: Clarify PXP queue creation behavior if PXP is not ready
drm/xe/pxp: Use the correct define in the set_property_funcs array
drm/xe/sched: stop re-submitting signalled jobs
drm/xe: Rework eviction rejection of bound external bos
drm/xe/vsec: fix CONFIG_INTEL_VSEC dependency
drm/xe: drop redundant conversion to bool
drm/xe/hwmon: Move card reactive critical power under channel card
drm/xe/hwmon: Add support to manage power limits though mailbox
drm/xe/vm: move xe_svm_init() earlier
drm/xe/vm: move rebind_work init earlier
MAINTAINERS: .mailmap: update Rob Clark's email address
mailmap: Update entry for Akhil P Oommen
MAINTAINERS: update my email address
MAINTAINERS: drop myself as maintainer
drm/i915/display: Fix u32 overflow in SNPS PHY HDMI PLL setup
drm/amd/display: Fix default DC and AC levels
...
|
|
Add KUnit tests for the newly introduced devm_drm_bridge_alloc().
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250606-drm-bridge-alloc-doc-test-v9-3-b5bf7b43ed92@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Some users of DRM bridges may need to execute specific code just before
deallocation.
As of now the only known user would be KUnit tests.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250606-drm-bridge-alloc-doc-test-v9-2-b5bf7b43ed92@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
