summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/display/bridge/sii9234.txt
blob: 88041ba23d56c9f8972078b35c59c9d6c68553f9 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
Silicon Image SiI9234 HDMI/MHL bridge bindings

Required properties:
	- compatible : "sil,sii9234".
	- reg : I2C address for TPI interface, use 0x39
	- avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
	- iovcc18-supply : I/O Supply Voltage (1.8V)
	- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
	- cvcc12-supply : Digital Core Supply Voltage (1.2V)
	- interrupts, interrupt-parent: interrupt specifier of INT pin
	- reset-gpios: gpio specifier of RESET pin (active low)
	- video interfaces: Device node can contain two video interface port
			    nodes for HDMI encoder and connector according to [1].
			    - port@0 - MHL to HDMI
			    - port@1 - MHL to connector

[1]: Documentation/devicetree/bindings/media/video-interfaces.txt


Example:
	sii9234@39 {
		compatible = "sil,sii9234";
		reg = <0x39>;
		avcc33-supply = <&vcc33mhl>;
		iovcc18-supply = <&vcc18mhl>;
		avcc12-supply = <&vsil12>;
		cvcc12-supply = <&vsil12>;
		reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
		interrupt-parent = <&gpf3>;
		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				mhl_to_hdmi: endpoint {
					remote-endpoint = <&hdmi_to_mhl>;
				};
			};
			port@1 {
				reg = <1>;
				mhl_to_connector: endpoint {
					remote-endpoint = <&connector_to_mhl>;
				};
			};
		};
	};