diff options
Diffstat (limited to 'drivers/hwtracing/coresight/coresight-etm4x.c')
-rw-r--r-- | drivers/hwtracing/coresight/coresight-etm4x.c | 419 |
1 files changed, 319 insertions, 100 deletions
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index 1a5e0d14c1dd..4db8d6a4d0cb 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -33,7 +33,6 @@ #include <linux/uaccess.h> #include <linux/perf_event.h> #include <linux/pm_runtime.h> -#include <linux/perf_event.h> #include <asm/sections.h> #include <asm/local.h> @@ -46,7 +45,9 @@ module_param_named(boot_enable, boot_enable, int, S_IRUGO); /* The number of ETMv4 currently registered */ static int etm4_count; static struct etmv4_drvdata *etmdrvdata[NR_CPUS]; -static void etm4_set_default(struct etmv4_config *config); +static void etm4_set_default_config(struct etmv4_config *config); +static int etm4_set_event_filters(struct etmv4_drvdata *drvdata, + struct perf_event *event); static enum cpuhp_state hp_online; @@ -79,22 +80,8 @@ static int etm4_cpu_id(struct coresight_device *csdev) static int etm4_trace_id(struct coresight_device *csdev) { struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); - unsigned long flags; - int trace_id = -1; - - if (!local_read(&drvdata->mode)) - return drvdata->trcid; - - spin_lock_irqsave(&drvdata->spinlock, flags); - - CS_UNLOCK(drvdata->base); - trace_id = readl_relaxed(drvdata->base + TRCTRACEIDR); - trace_id &= ETM_TRACEID_MASK; - CS_LOCK(drvdata->base); - spin_unlock_irqrestore(&drvdata->spinlock, flags); - - return trace_id; + return drvdata->trcid; } static void etm4_enable_hw(void *info) @@ -113,8 +100,7 @@ static void etm4_enable_hw(void *info) /* wait for TRCSTATR.IDLE to go up */ if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 1)) dev_err(drvdata->dev, - "timeout observed when probing at offset %#x\n", - TRCSTATR); + "timeout while waiting for Idle Trace Status\n"); writel_relaxed(config->pe_sel, drvdata->base + TRCPROCSELR); writel_relaxed(config->cfg, drvdata->base + TRCCONFIGR); @@ -180,14 +166,20 @@ static void etm4_enable_hw(void *info) writel_relaxed(config->vmid_mask0, drvdata->base + TRCVMIDCCTLR0); writel_relaxed(config->vmid_mask1, drvdata->base + TRCVMIDCCTLR1); + /* + * Request to keep the trace unit powered and also + * emulation of powerdown + */ + writel_relaxed(readl_relaxed(drvdata->base + TRCPDCR) | TRCPDCR_PU, + drvdata->base + TRCPDCR); + /* Enable the trace unit */ writel_relaxed(1, drvdata->base + TRCPRGCTLR); /* wait for TRCSTATR.IDLE to go back down to '0' */ if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 0)) dev_err(drvdata->dev, - "timeout observed when probing at offset %#x\n", - TRCSTATR); + "timeout while waiting for Idle Trace Status\n"); CS_LOCK(drvdata->base); @@ -195,12 +187,16 @@ static void etm4_enable_hw(void *info) } static int etm4_parse_event_config(struct etmv4_drvdata *drvdata, - struct perf_event_attr *attr) + struct perf_event *event) { + int ret = 0; struct etmv4_config *config = &drvdata->config; + struct perf_event_attr *attr = &event->attr; - if (!attr) - return -EINVAL; + if (!attr) { + ret = -EINVAL; + goto out; + } /* Clear configuration from previous run */ memset(config, 0, sizeof(struct etmv4_config)); @@ -212,14 +208,12 @@ static int etm4_parse_event_config(struct etmv4_drvdata *drvdata, config->mode = ETM_MODE_EXCL_USER; /* Always start from the default config */ - etm4_set_default(config); + etm4_set_default_config(config); - /* - * By default the tracers are configured to trace the whole address - * range. Narrow the field only if requested by user space. - */ - if (config->mode) - etm4_config_trace_mode(config); + /* Configure filters specified on the perf cmd line, if any. */ + ret = etm4_set_event_filters(drvdata, event); + if (ret) + goto out; /* Go from generic option to ETMv4 specifics */ if (attr->config & BIT(ETM_OPT_CYCACC)) @@ -227,23 +221,30 @@ static int etm4_parse_event_config(struct etmv4_drvdata *drvdata, if (attr->config & BIT(ETM_OPT_TS)) config->cfg |= ETMv4_MODE_TIMESTAMP; - return 0; +out: + return ret; } static int etm4_enable_perf(struct coresight_device *csdev, - struct perf_event_attr *attr) + struct perf_event *event) { + int ret = 0; struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); - if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id())) - return -EINVAL; + if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id())) { + ret = -EINVAL; + goto out; + } /* Configure the tracer based on the session's specifics */ - etm4_parse_event_config(drvdata, attr); + ret = etm4_parse_event_config(drvdata, event); + if (ret) + goto out; /* And enable it */ etm4_enable_hw(drvdata); - return 0; +out: + return ret; } static int etm4_enable_sysfs(struct coresight_device *csdev) @@ -274,7 +275,7 @@ err: } static int etm4_enable(struct coresight_device *csdev, - struct perf_event_attr *attr, u32 mode) + struct perf_event *event, u32 mode) { int ret; u32 val; @@ -291,7 +292,7 @@ static int etm4_enable(struct coresight_device *csdev, ret = etm4_enable_sysfs(csdev); break; case CS_MODE_PERF: - ret = etm4_enable_perf(csdev, attr); + ret = etm4_enable_perf(csdev, event); break; default: ret = -EINVAL; @@ -311,6 +312,11 @@ static void etm4_disable_hw(void *info) CS_UNLOCK(drvdata->base); + /* power can be removed from the trace unit now */ + control = readl_relaxed(drvdata->base + TRCPDCR); + control &= ~TRCPDCR_PU; + writel_relaxed(control, drvdata->base + TRCPDCR); + control = readl_relaxed(drvdata->base + TRCPRGCTLR); /* EN, bit[0] Trace unit enable bit */ @@ -326,14 +332,28 @@ static void etm4_disable_hw(void *info) dev_dbg(drvdata->dev, "cpu: %d disable smp call done\n", drvdata->cpu); } -static int etm4_disable_perf(struct coresight_device *csdev) +static int etm4_disable_perf(struct coresight_device *csdev, + struct perf_event *event) { + u32 control; + struct etm_filters *filters = event->hw.addr_filters; struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id())) return -EINVAL; etm4_disable_hw(drvdata); + + /* + * Check if the start/stop logic was active when the unit was stopped. + * That way we can re-enable the start/stop logic when the process is + * scheduled again. Configuration of the start/stop logic happens in + * function etm4_set_event_filters(). + */ + control = readl_relaxed(drvdata->base + TRCVICTLR); + /* TRCVICTLR::SSSTATUS, bit[9] */ + filters->ssstatus = (control & BIT(9)); + return 0; } @@ -362,7 +382,8 @@ static void etm4_disable_sysfs(struct coresight_device *csdev) dev_info(drvdata->dev, "ETM tracing disabled\n"); } -static void etm4_disable(struct coresight_device *csdev) +static void etm4_disable(struct coresight_device *csdev, + struct perf_event *event) { u32 mode; struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); @@ -381,7 +402,7 @@ static void etm4_disable(struct coresight_device *csdev) etm4_disable_sysfs(csdev); break; case CS_MODE_PERF: - etm4_disable_perf(csdev); + etm4_disable_perf(csdev, event); break; } @@ -564,21 +585,8 @@ static void etm4_init_arch_data(void *info) CS_LOCK(drvdata->base); } -static void etm4_set_default(struct etmv4_config *config) +static void etm4_set_default_config(struct etmv4_config *config) { - if (WARN_ON_ONCE(!config)) - return; - - /* - * Make default initialisation trace everything - * - * Select the "always true" resource selector on the - * "Enablign Event" line and configure address range comparator - * '0' to trace all the possible address range. From there - * configure the "include/exclude" engine to include address - * range comparator '0'. - */ - /* disable all events tracing */ config->eventctrl0 = 0x0; config->eventctrl1 = 0x0; @@ -594,6 +602,108 @@ static void etm4_set_default(struct etmv4_config *config) /* TRCVICTLR::EVENT = 0x01, select the always on logic */ config->vinst_ctrl |= BIT(0); +} + +static u64 etm4_get_access_type(struct etmv4_config *config) +{ + u64 access_type = 0; + + /* + * EXLEVEL_NS, bits[15:12] + * The Exception levels are: + * Bit[12] Exception level 0 - Application + * Bit[13] Exception level 1 - OS + * Bit[14] Exception level 2 - Hypervisor + * Bit[15] Never implemented + * + * Always stay away from hypervisor mode. + */ + access_type = ETM_EXLEVEL_NS_HYP; + + if (config->mode & ETM_MODE_EXCL_KERN) + access_type |= ETM_EXLEVEL_NS_OS; + + if (config->mode & ETM_MODE_EXCL_USER) + access_type |= ETM_EXLEVEL_NS_APP; + + /* + * EXLEVEL_S, bits[11:8], don't trace anything happening + * in secure state. + */ + access_type |= (ETM_EXLEVEL_S_APP | + ETM_EXLEVEL_S_OS | + ETM_EXLEVEL_S_HYP); + + return access_type; +} + +static void etm4_set_comparator_filter(struct etmv4_config *config, + u64 start, u64 stop, int comparator) +{ + u64 access_type = etm4_get_access_type(config); + + /* First half of default address comparator */ + config->addr_val[comparator] = start; + config->addr_acc[comparator] = access_type; + config->addr_type[comparator] = ETM_ADDR_TYPE_RANGE; + + /* Second half of default address comparator */ + config->addr_val[comparator + 1] = stop; + config->addr_acc[comparator + 1] = access_type; + config->addr_type[comparator + 1] = ETM_ADDR_TYPE_RANGE; + + /* + * Configure the ViewInst function to include this address range + * comparator. + * + * @comparator is divided by two since it is the index in the + * etmv4_config::addr_val array but register TRCVIIECTLR deals with + * address range comparator _pairs_. + * + * Therefore: + * index 0 -> compatator pair 0 + * index 2 -> comparator pair 1 + * index 4 -> comparator pair 2 + * ... + * index 14 -> comparator pair 7 + */ + config->viiectlr |= BIT(comparator / 2); +} + +static void etm4_set_start_stop_filter(struct etmv4_config *config, + u64 address, int comparator, + enum etm_addr_type type) +{ + int shift; + u64 access_type = etm4_get_access_type(config); + + /* Configure the comparator */ + config->addr_val[comparator] = address; + config->addr_acc[comparator] = access_type; + config->addr_type[comparator] = type; + + /* + * Configure ViewInst Start-Stop control register. + * Addresses configured to start tracing go from bit 0 to n-1, + * while those configured to stop tracing from 16 to 16 + n-1. + */ + shift = (type == ETM_ADDR_TYPE_START ? 0 : 16); + config->vissctlr |= BIT(shift + comparator); +} + +static void etm4_set_default_filter(struct etmv4_config *config) +{ + u64 start, stop; + + /* + * Configure address range comparator '0' to encompass all + * possible addresses. + */ + start = 0x0; + stop = ~0x0; + + etm4_set_comparator_filter(config, start, stop, + ETM_DEFAULT_ADDR_COMP); /* * TRCVICTLR::SSSTATUS == 1, the start-stop logic is @@ -601,43 +711,156 @@ static void etm4_set_default(struct etmv4_config *config) */ config->vinst_ctrl |= BIT(9); + /* No start-stop filtering for ViewInst */ + config->vissctlr = 0x0; +} + +static void etm4_set_default(struct etmv4_config *config) +{ + if (WARN_ON_ONCE(!config)) + return; + /* - * Configure address range comparator '0' to encompass all - * possible addresses. + * Make default initialisation trace everything + * + * Select the "always true" resource selector on the + * "Enablign Event" line and configure address range comparator + * '0' to trace all the possible address range. From there + * configure the "include/exclude" engine to include address + * range comparator '0'. */ + etm4_set_default_config(config); + etm4_set_default_filter(config); +} - /* First half of default address comparator: start at address 0 */ - config->addr_val[ETM_DEFAULT_ADDR_COMP] = 0x0; - /* trace instruction addresses */ - config->addr_acc[ETM_DEFAULT_ADDR_COMP] &= ~(BIT(0) | BIT(1)); - /* EXLEVEL_NS, bits[12:15], only trace application and kernel space */ - config->addr_acc[ETM_DEFAULT_ADDR_COMP] |= ETM_EXLEVEL_NS_HYP; - /* EXLEVEL_S, bits[11:8], don't trace anything in secure state */ - config->addr_acc[ETM_DEFAULT_ADDR_COMP] |= (ETM_EXLEVEL_S_APP | - ETM_EXLEVEL_S_OS | - ETM_EXLEVEL_S_HYP); - config->addr_type[ETM_DEFAULT_ADDR_COMP] = ETM_ADDR_TYPE_RANGE; +static int etm4_get_next_comparator(struct etmv4_drvdata *drvdata, u32 type) +{ + int nr_comparator, index = 0; + struct etmv4_config *config = &drvdata->config; /* - * Second half of default address comparator: go all - * the way to the top. - */ - config->addr_val[ETM_DEFAULT_ADDR_COMP + 1] = ~0x0; - /* trace instruction addresses */ - config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] &= ~(BIT(0) | BIT(1)); - /* Address comparator type must be equal for both halves */ - config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] = - config->addr_acc[ETM_DEFAULT_ADDR_COMP]; - config->addr_type[ETM_DEFAULT_ADDR_COMP + 1] = ETM_ADDR_TYPE_RANGE; + * nr_addr_cmp holds the number of comparator _pair_, so time 2 + * for the total number of comparators. + */ + nr_comparator = drvdata->nr_addr_cmp * 2; + + /* Go through the tally of comparators looking for a free one. */ + while (index < nr_comparator) { + switch (type) { + case ETM_ADDR_TYPE_RANGE: + if (config->addr_type[index] == ETM_ADDR_TYPE_NONE && + config->addr_type[index + 1] == ETM_ADDR_TYPE_NONE) + return index; + + /* Address range comparators go in pairs */ + index += 2; + break; + case ETM_ADDR_TYPE_START: + case ETM_ADDR_TYPE_STOP: + if (config->addr_type[index] == ETM_ADDR_TYPE_NONE) + return index; + + /* Start/stop address can have odd indexes */ + index += 1; + break; + default: + return -EINVAL; + } + } + + /* If we are here all the comparators have been used. */ + return -ENOSPC; +} + +static int etm4_set_event_filters(struct etmv4_drvdata *drvdata, + struct perf_event *event) +{ + int i, comparator, ret = 0; + u64 address; + struct etmv4_config *config = &drvdata->config; + struct etm_filters *filters = event->hw.addr_filters; + + if (!filters) + goto default_filter; + + /* Sync events with what Perf got */ + perf_event_addr_filters_sync(event); /* - * Configure the ViewInst function to filter on address range - * comparator '0'. + * If there are no filters to deal with simply go ahead with + * the default filter, i.e the entire address range. */ - config->viiectlr = BIT(0); + if (!filters->nr_filters) + goto default_filter; + + for (i = 0; i < filters->nr_filters; i++) { + struct etm_filter *filter = &filters->etm_filter[i]; + enum etm_addr_type type = filter->type; + + /* See if a comparator is free. */ + comparator = etm4_get_next_comparator(drvdata, type); + if (comparator < 0) { + ret = comparator; + goto out; + } + + switch (type) { + case ETM_ADDR_TYPE_RANGE: + etm4_set_comparator_filter(config, + filter->start_addr, + filter->stop_addr, + comparator); + /* + * TRCVICTLR::SSSTATUS == 1, the start-stop logic is + * in the started state + */ + config->vinst_ctrl |= BIT(9); + + /* No start-stop filtering for ViewInst */ + config->vissctlr = 0x0; + break; + case ETM_ADDR_TYPE_START: + case ETM_ADDR_TYPE_STOP: + /* Get the right start or stop address */ + address = (type == ETM_ADDR_TYPE_START ? + filter->start_addr : + filter->stop_addr); + + /* Configure comparator */ + etm4_set_start_stop_filter(config, address, + comparator, type); + + /* + * If filters::ssstatus == 1, trace acquisition was + * started but the process was yanked away before the + * the stop address was hit. As such the start/stop + * logic needs to be re-started so that tracing can + * resume where it left. + * + * The start/stop logic status when a process is + * scheduled out is checked in function + * etm4_disable_perf(). + */ + if (filters->ssstatus) + config->vinst_ctrl |= BIT(9); + + /* No include/exclude filtering for ViewInst */ + config->viiectlr = 0x0; + break; + default: + ret = -EINVAL; + goto out; + } + } - /* no start-stop filtering for ViewInst */ - config->vissctlr = 0x0; + goto out; + + +default_filter: + etm4_set_default_filter(config); + +out: + return ret; } void etm4_config_trace_mode(struct etmv4_config *config) @@ -727,13 +950,9 @@ static int etm4_probe(struct amba_device *adev, const struct amba_id *id) struct coresight_platform_data *pdata = NULL; struct etmv4_drvdata *drvdata; struct resource *res = &adev->res; - struct coresight_desc *desc; + struct coresight_desc desc = { 0 }; struct device_node *np = adev->dev.of_node; - desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL); - if (!desc) - return -ENOMEM; - drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); if (!drvdata) return -ENOMEM; @@ -788,13 +1007,13 @@ static int etm4_probe(struct amba_device *adev, const struct amba_id *id) etm4_init_trace_id(drvdata); etm4_set_default(&drvdata->config); - desc->type = CORESIGHT_DEV_TYPE_SOURCE; - desc->subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_PROC; - desc->ops = &etm4_cs_ops; - desc->pdata = pdata; - desc->dev = dev; - desc->groups = coresight_etmv4_groups; - drvdata->csdev = coresight_register(desc); + desc.type = CORESIGHT_DEV_TYPE_SOURCE; + desc.subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_PROC; + desc.ops = &etm4_cs_ops; + desc.pdata = pdata; + desc.dev = dev; + desc.groups = coresight_etmv4_groups; + drvdata->csdev = coresight_register(&desc); if (IS_ERR(drvdata->csdev)) { ret = PTR_ERR(drvdata->csdev); goto err_arch_supported; @@ -826,12 +1045,12 @@ err_arch_supported: } static struct amba_id etm4_ids[] = { - { /* ETM 4.0 - Qualcomm */ - .id = 0x0003b95d, - .mask = 0x0003ffff, + { /* ETM 4.0 - Cortex-A53 */ + .id = 0x000bb95d, + .mask = 0x000fffff, .data = "ETM 4.0", }, - { /* ETM 4.0 - Juno board */ + { /* ETM 4.0 - Cortex-A57 */ .id = 0x000bb95e, .mask = 0x000fffff, .data = "ETM 4.0", |