diff options
Diffstat (limited to 'arch/arm/mach-imx')
43 files changed, 367 insertions, 1132 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ee9a318cab31..9155b639c9aa 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -64,13 +64,6 @@ config IMX_HAVE_IOMUX_V1 config ARCH_MXC_IOMUX_V3 bool -config SOC_IMX1 - bool - select CPU_ARM920T - select IMX_HAVE_IOMUX_V1 - select MXC_AVIC - select PINCTRL_IMX1 - config SOC_IMX21 bool select CPU_ARM926T @@ -88,7 +81,6 @@ config SOC_IMX31 bool select CPU_V6 select MXC_AVIC - select SMP_ON_UP if SMP config SOC_IMX35 bool @@ -96,35 +88,6 @@ config SOC_IMX35 select HAVE_EPIT select MXC_AVIC select PINCTRL_IMX35 - select SMP_ON_UP if SMP - -if ARCH_MULTI_V4T - -comment "MX1 platforms:" - -config MACH_SCB9328 - bool "Synertronixx scb9328" - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX1 - help - Say Y here if you are using a Synertronixx scb9328 board - -config MACH_APF9328 - bool "APF9328" - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX1 - help - Say Yes here if you are using the Armadeus APF9328 development board - -config MACH_IMX1_DT - bool "Support i.MX1 platforms from device tree" - select SOC_IMX1 - help - Include support for Freescale i.MX1 based platforms - using the device tree for discovery. - -endif if ARCH_MULTI_V5 @@ -461,6 +424,18 @@ endif comment "Device tree only" +if ARCH_MULTI_V4T + +config SOC_IMX1 + bool "i.MX1 support" + select CPU_ARM920T + select MXC_AVIC + select PINCTRL_IMX1 + help + This enables support for Freescale i.MX1 processor + +endif + if ARCH_MULTI_V5 config SOC_IMX25 @@ -523,7 +498,6 @@ config SOC_IMX6Q select ARM_ERRATA_764369 if SMP select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD - select PCI_DOMAINS if PCI select PINCTRL_IMX6Q select SOC_IMX6 @@ -569,7 +543,6 @@ config SOC_LS1021A bool "Freescale LS1021A support" select ARM_GIC select HAVE_ARM_ARCH_TIMER - select PCI_DOMAINS if PCI select ZONE_DMA if ARM_LPAE help This enables support for Freescale LS1021A processor. @@ -585,7 +558,6 @@ config SOC_VF610 select ARM_GIC if ARCH_MULTI_V7 select PINCTRL_VF610 select PL310_ERRATA_769419 if CACHE_L2X0 - select SMP_ON_UP if SMP help This enables support for Freescale Vybrid VF610 processor. diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 9f5fffd62702..737450fe790c 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,6 +1,5 @@ obj-y := cpu.o system.o irq-common.o -obj-$(CONFIG_SOC_IMX1) += mm-imx1.o obj-$(CONFIG_SOC_IMX21) += mm-imx21.o obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o @@ -28,18 +27,13 @@ obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o +obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o endif ifdef CONFIG_SND_IMX_SOC obj-y += ssi-fiq.o -obj-y += ssi-fiq-ksym.o endif -# i.MX1 based machines -obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o -obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o -obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o - # i.MX21 based machines obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o @@ -93,6 +87,7 @@ obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif obj-$(CONFIG_SOC_IMX6) += pm-imx6.o +obj-$(CONFIG_SOC_IMX1) += mach-imx1.o obj-$(CONFIG_SOC_IMX50) += mach-imx50.o obj-$(CONFIG_SOC_IMX51) += mach-imx51.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index a8f469333027..c4436d9c52ff 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -21,29 +21,24 @@ struct device_node; enum mxc_cpu_pwr_mode; struct of_device_id; -void mx1_map_io(void); void mx21_map_io(void); void mx27_map_io(void); void mx31_map_io(void); void mx35_map_io(void); -void imx1_init_early(void); void imx21_init_early(void); void imx27_init_early(void); void imx31_init_early(void); void imx35_init_early(void); void mxc_init_irq(void __iomem *); -void mx1_init_irq(void); void mx21_init_irq(void); void mx27_init_irq(void); void mx31_init_irq(void); void mx35_init_irq(void); -void imx1_soc_init(void); void imx21_soc_init(void); void imx27_soc_init(void); void imx31_soc_init(void); void imx35_soc_init(void); void epit_timer_init(void __iomem *base, int irq); -int mx1_clocks_init(unsigned long fref); int mx21_clocks_init(unsigned long lref, unsigned long fref); int mx27_clocks_init(unsigned long fref); int mx31_clocks_init(unsigned long fref); @@ -109,7 +104,7 @@ void imx_anatop_init(void); void imx_anatop_pre_suspend(void); void imx_anatop_post_resume(void); int imx6_set_lpm(enum mxc_cpu_pwr_mode mode); -void imx6q_set_int_mem_clk_lpm(bool enable); +void imx6_set_int_mem_clk_lpm(bool enable); void imx6sl_set_wait_clk(bool enter); int imx_mmdc_get_ddr_type(void); diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index db0f48c4b17e..bfeb25aaf9a2 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -85,7 +85,7 @@ EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused); int __init imx6q_cpuidle_init(void) { /* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */ - imx6q_set_int_mem_clk_lpm(true); + imx6_set_int_mem_clk_lpm(true); return cpuidle_register(&imx6q_cpuidle_driver, NULL); } diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c index 3c6672b3796b..c5a5c3a70ab1 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sx.c +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -9,6 +9,7 @@ #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/module.h> +#include <asm/cacheflush.h> #include <asm/cpuidle.h> #include <asm/suspend.h> @@ -17,6 +18,15 @@ static int imx6sx_idle_finish(unsigned long val) { + /* + * for Cortex-A7 which has an internal L2 + * cache, need to flush it before powering + * down ARM platform, since flushing L1 cache + * here again has very small overhead, compared + * to adding conditional code for L2 cache type, + * just call flush_cache_all() is fine. + */ + flush_cache_all(); cpu_do_idle(); return 0; @@ -90,6 +100,7 @@ static struct cpuidle_driver imx6sx_cpuidle_driver = { int __init imx6sx_cpuidle_init(void) { + imx6_set_int_mem_clk_lpm(true); imx6_enable_rbc(false); /* * set ARM power up/down timing to the fastest, diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h deleted file mode 100644 index f9b5afc6bcd1..000000000000 --- a/arch/arm/mach-imx/devices-imx1.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include "devices/devices-common.h" - -extern const struct imx_imx_fb_data imx1_imx_fb_data; -#define imx1_add_imx_fb(pdata) \ - imx_add_imx_fb(&imx1_imx_fb_data, pdata) - -extern const struct imx_imx_i2c_data imx1_imx_i2c_data; -#define imx1_add_imx_i2c(pdata) \ - imx_add_imx_i2c(&imx1_imx_i2c_data, pdata) - -extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[]; -#define imx1_add_imx_uart(id, pdata) \ - imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata) -#define imx1_add_imx_uart0(pdata) imx1_add_imx_uart(0, pdata) -#define imx1_add_imx_uart1(pdata) imx1_add_imx_uart(1, pdata) - -extern const struct imx_spi_imx_data imx1_cspi_data[]; -#define imx1_add_cspi(id, pdata) \ - imx_add_spi_imx(&imx1_cspi_data[id], pdata) - -#define imx1_add_spi_imx0(pdata) imx1_add_cspi(0, pdata) -#define imx1_add_spi_imx1(pdata) imx1_add_cspi(1, pdata) diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index e5cf587bc1a0..aa6cee870795 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 09cebd8cef2b..6920e356f4e5 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -154,18 +154,6 @@ struct platform_device *__init imx_add_imx_ssi( const struct imx_ssi_platform_data *pdata); #include <linux/platform_data/serial-imx.h> -struct imx_imx_uart_3irq_data { - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irqrx; - resource_size_t irqtx; - resource_size_t irqrts; -}; -struct platform_device *__init imx_add_imx_uart_3irq( - const struct imx_imx_uart_3irq_data *data, - const struct imxuart_platform_data *pdata); - struct imx_imx_uart_1irq_data { int id; resource_size_t iobase; diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 7df6328306f9..aa00272252e0 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -19,11 +19,6 @@ .irq = soc ## _INT_LCDC, \ } -#ifdef CONFIG_SOC_IMX1 -const struct imx_imx_fb_data imx1_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX1 */ - #ifdef CONFIG_SOC_IMX21 const struct imx_imx_fb_data imx21_imx_fb_data __initconst = imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c index ae9791522fc8..9822bedb5d09 100644 --- a/arch/arm/mach-imx/devices/platform-imx-i2c.c +++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c @@ -21,11 +21,6 @@ #define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \ [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) -#ifdef CONFIG_SOC_IMX1 -const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst = - imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX1 */ - #ifdef CONFIG_SOC_IMX21 const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c index 6962cff4a950..e3c89e9caf93 100644 --- a/arch/arm/mach-imx/devices/platform-imx-uart.c +++ b/arch/arm/mach-imx/devices/platform-imx-uart.c @@ -27,15 +27,6 @@ .irq = soc ## _INT_UART ## _hwid, \ } -#ifdef CONFIG_SOC_IMX1 -const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = { -#define imx1_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0) - imx1_imx_uart_data_entry(0, 1), - imx1_imx_uart_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX1 */ - #ifdef CONFIG_SOC_IMX21 const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { #define imx21_imx_uart_data_entry(_id, _hwid) \ @@ -82,34 +73,6 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX35 */ -struct platform_device *__init imx_add_imx_uart_3irq( - const struct imx_imx_uart_3irq_data *data, - const struct imxuart_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irqrx, - .end = data->irqrx, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irqtx, - .end = data->irqtx, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irqrts, - .end = data->irqrx, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("imx1-uart", data->id, res, - ARRAY_SIZE(res), pdata, sizeof(*pdata)); -} - struct platform_device *__init imx_add_imx_uart_1irq( const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata) diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c index 5e9707b47f92..d93c446c9c02 100644 --- a/arch/arm/mach-imx/devices/platform-spi_imx.c +++ b/arch/arm/mach-imx/devices/platform-spi_imx.c @@ -21,15 +21,6 @@ #define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \ [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size) -#ifdef CONFIG_SOC_IMX1 -const struct imx_spi_imx_data imx1_cspi_data[] __initconst = { -#define imx1_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX1, CSPI, "imx1-cspi", _id, _hwid, SZ_4K) - imx1_cspi_data_entry(0, 1), - imx1_cspi_data_entry(1, 2), -}; -#endif - #ifdef CONFIG_SOC_IMX21 const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { #define imx21_cspi_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index d737f95ebb07..90e10cbd8fd1 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -112,7 +112,6 @@ #include "mx2x.h" #include "mx21.h" #include "mx27.h" -#include "mx1.h" #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ @@ -121,7 +120,7 @@ .type = _type, \ } -/* There's a off-by-one betweem the gpio bank number and the gpiochip */ +/* There's an off-by-one between the gpio bank number and the gpiochip */ /* range e.g. GPIO_1_5 is gpio 5 under linux */ #define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr)) diff --git a/arch/arm/mach-imx/iomux-mx1.h b/arch/arm/mach-imx/iomux-mx1.h deleted file mode 100644 index 95f4681d85d7..000000000000 --- a/arch/arm/mach-imx/iomux-mx1.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ -#ifndef __MACH_IOMUX_MX1_H__ -#define __MACH_IOMUX_MX1_H__ - -#include "iomux-v1.h" - -#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) -#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) -#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1) -#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2) -#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) -#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) -#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) -#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) -#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) -#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) -#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) -#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) -#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) -#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) -#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) -#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) -#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) -#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) -#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) -#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) -#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) -#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) -#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) -#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) -#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) -#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) -#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) -#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) -#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) -#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) -#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) -#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) -#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) -#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) -#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) -#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) -#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) -#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) -#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) -#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) -#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) -#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) -#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) -#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) -#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) -#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) -#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) -#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) -#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) -#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) -#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) -#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16) -#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17) -#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) -#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) -#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) -#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) -#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28) -#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29) -#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30) -#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31) -#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) -#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) -#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) -#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6) -#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) -#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10) -#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) -#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12) -#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) -#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) -#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) -#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24) -#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25) -#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26) -#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27) -#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28) -#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29) -#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) -#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31) -#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6) -#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) -#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7) -#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) -#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) -#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8) -#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) -#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) -#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9) -#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9) -#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10) -#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10) -#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10) -#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11) -#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12) -#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13) -#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14) -#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15) -#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16) -#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) -#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) -#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) -#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) -#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) -#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23) -#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) -#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) -#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) -#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) -#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) -#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) -#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30) -#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) -#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) - -#endif /* ifndef __MACH_IOMUX_MX1_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h index 2e4a0ddca76c..368667b32760 100644 --- a/arch/arm/mach-imx/iomux-mx3.h +++ b/arch/arm/mach-imx/iomux-mx3.h @@ -598,10 +598,7 @@ enum iomux_pins { #define MX31_PIN_CONTRAST__CONTRAST IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) #define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) #define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1) @@ -665,37 +662,6 @@ enum iomux_pins { #define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) #define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) -#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) -#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) -#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO) #define MX31_PIN_SVEN0__GPIO2_0 IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO) #define MX31_PIN_STX0__GPIO2_1 IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO) diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c deleted file mode 100644 index ebbb5ab63529..000000000000 --- a/arch/arm/mach-imx/mach-apf9328.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * linux/arch/arm/mach-imx/mach-apf9328.c - * - * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com> - * - * This work is based on mach-scb9328.c which is: - * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> - * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/dm9000.h> -#include <linux/gpio.h> -#include <linux/i2c.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx1.h" -#include "hardware.h" -#include "iomux-mx1.h" - -static const int apf9328_pins[] __initconst = { - /* UART1 */ - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, - /* UART2 */ - PB28_PF_UART2_CTS, - PB29_PF_UART2_RTS, - PB30_PF_UART2_TXD, - PB31_PF_UART2_RXD, - /* I2C */ - PA15_PF_I2C_SDA, - PA16_PF_I2C_SCL, -}; - -/* - * The APF9328 can have up to 32MB NOR Flash - */ -static struct resource flash_resource = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct physmap_flash_data apf9328_flash_data = { - .width = 2, -}; - -static struct platform_device apf9328_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &apf9328_flash_data, - }, - .resource = &flash_resource, - .num_resources = 1, -}; - -/* - * APF9328 has a DM9000 Ethernet controller - */ -static struct dm9000_plat_data dm9000_setup = { - .flags = DM9000_PLATF_16BITONLY -}; - -static struct resource dm9000_resources[] = { - { - .start = MX1_CS4_PHYS + 0x00C00000, - .end = MX1_CS4_PHYS + 0x00C00001, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_CS4_PHYS + 0x00C00002, - .end = MX1_CS4_PHYS + 0x00C00003, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device dm9000x_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000_resources), - .resource = dm9000_resources, - .dev = { - .platform_data = &dm9000_setup, - } -}; - -static const struct imxuart_platform_data uart1_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data apf9328_i2c_data __initconst = { - .bitrate = 100000, -}; - -static struct platform_device *devices[] __initdata = { - &apf9328_flash_device, - &dm9000x_device, -}; - -static void __init apf9328_init(void) -{ - imx1_soc_init(); - - mxc_gpio_setup_multiple_pins(apf9328_pins, - ARRAY_SIZE(apf9328_pins), - "APF9328"); - - imx1_add_imx_uart0(NULL); - imx1_add_imx_uart1(&uart1_pdata); - - imx1_add_imx_i2c(&apf9328_i2c_data); - - dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14)); - dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14)); - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init apf9328_timer_init(void) -{ - mx1_clocks_init(32768); -} - -MACHINE_START(APF9328, "Armadeus APF9328") - /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */ - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = apf9328_timer_init, - .init_machine = apf9328_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index eaee47a2fcc0..17a97ba2cecf 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -493,24 +493,12 @@ static void __init armadillo5x0_init(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - armadillo5x0_smc911x_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); - armadillo5x0_smc911x_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); - platform_add_devices(devices, ARRAY_SIZE(devices)); - imx_add_gpio_keys(&armadillo5x0_button_data); imx31_add_imx_i2c1(NULL); /* Register UART */ imx31_add_imx_uart0(&uart_pdata); imx31_add_imx_uart1(&uart_pdata); - /* SMSC9118 IRQ pin */ - gpio_direction_input(MX31_PIN_GPIO1_0); - - /* Register SDHC */ - imx31_add_mxc_mmc(0, &sdhc_pdata); - /* Register FB */ imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); @@ -527,21 +515,39 @@ static void __init armadillo5x0_init(void) /* set NAND page size to 2k if not configured via boot mode pins */ imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); +} + +static void __init armadillo5x0_late(void) +{ + armadillo5x0_smc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + armadillo5x0_smc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + platform_add_devices(devices, ARRAY_SIZE(devices)); + + imx_add_gpio_keys(&armadillo5x0_button_data); + + /* SMSC9118 IRQ pin */ + gpio_direction_input(MX31_PIN_GPIO1_0); + + /* Register SDHC */ + imx31_add_mxc_mmc(0, &sdhc_pdata); /* RTC */ /* Get RTC IRQ and register the chip */ - if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0) - armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO); + if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) { + if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO)) + armadillo5x0_i2c_rtc.irq = + gpio_to_irq(ARMADILLO5X0_RTC_GPIO); else gpio_free(ARMADILLO5X0_RTC_GPIO); } + if (armadillo5x0_i2c_rtc.irq == 0) pr_warn("armadillo5x0_init: failed to get RTC IRQ\n"); i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); /* USB */ - usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); if (usbotg_pdata.otg) @@ -565,5 +571,6 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500") .init_irq = mx31_init_irq, .init_time = armadillo5x0_timer_init, .init_machine = armadillo5x0_init, + .init_late = armadillo5x0_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/imx1-dt.c b/arch/arm/mach-imx/mach-imx1.c index 6f915b0961c4..de5ab8d88549 100644 --- a/arch/arm/mach-imx/imx1-dt.c +++ b/arch/arm/mach-imx/mach-imx1.c @@ -9,8 +9,27 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include "common.h" +#include "hardware.h" + +#define MX1_AVIC_ADDR 0x00223000 + +static void __init imx1_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX1); +} + +static void __init imx1_init_irq(void) +{ + void __iomem *avic_addr; + + avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K); + WARN_ON(!avic_addr); + + mxc_init_irq(avic_addr); +} static const char * const imx1_dt_board_compat[] __initconst = { "fsl,imx1", @@ -18,9 +37,9 @@ static const char * const imx1_dt_board_compat[] __initconst = { }; DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)") - .map_io = mx1_map_io, + .map_io = debug_ll_io_init, .init_early = imx1_init_early, - .init_irq = mx1_init_irq, + .init_irq = imx1_init_irq, .dt_compat = imx1_dt_board_compat, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index ede2bdbb5dd5..dd75a4756761 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -540,7 +540,6 @@ static void __init visstrim_m10_revision(void) static void __init visstrim_m10_board_init(void) { int ret; - int mo_version; imx27_soc_init(); visstrim_m10_revision(); @@ -550,11 +549,6 @@ static void __init visstrim_m10_board_init(void) if (ret) pr_err("Failed to setup pins (%d)\n", ret); - ret = gpio_request_array(visstrim_m10_gpios, - ARRAY_SIZE(visstrim_m10_gpios)); - if (ret) - pr_err("Failed to request gpios (%d)\n", ret); - imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); @@ -566,12 +560,26 @@ static void __init visstrim_m10_board_init(void) imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata); imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata); imx27_add_fec(NULL); - imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init visstrim_m10_late_init(void) +{ + int mo_version, ret; + + ret = gpio_request_array(visstrim_m10_gpios, + ARRAY_SIZE(visstrim_m10_gpios)); + if (ret) + pr_err("Failed to request gpios (%d)\n", ret); + + imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); + imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata, sizeof(snd_mx27vis_pdata)); platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, &iclink_tvp5150, sizeof(iclink_tvp5150)); + gpio_led_register_device(0, &visstrim_m10_led_data); /* Use mother board version to decide what video devices we shall use */ @@ -591,6 +599,7 @@ static void __init visstrim_m10_board_init(void) visstrim_deinterlace_init(); visstrim_analog_camera_init(); } + visstrim_coda_init(); } @@ -607,5 +616,6 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .init_irq = mx27_init_irq, .init_time = visstrim_m10_timer_init, .init_machine = visstrim_m10_board_init, + .init_late = visstrim_m10_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index 6bb7d9cf1e38..58a2b88233e6 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -16,6 +16,7 @@ #include <asm/mach/map.h> #include "common.h" +#include "cpuidle.h" static void __init imx6ul_enet_clk_init(void) { @@ -80,6 +81,8 @@ static void __init imx6ul_init_irq(void) static void __init imx6ul_init_late(void) { + imx6sx_cpuidle_init(); + if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); } diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 31df4361996f..ab847e2c822a 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -63,7 +63,7 @@ */ #define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_8250) /* * KZM-ARM11-01 has an external UART on FPGA */ @@ -141,7 +141,7 @@ static inline int kzm_init_ext_uart(void) /* * SMSC LAN9118 */ -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) static struct smsc911x_platform_config kzm_smsc9118_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, @@ -201,7 +201,7 @@ static inline int kzm_init_smsc9118(void) } #endif -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_IMX) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -245,13 +245,17 @@ static void __init kzm_board_init(void) mxc_iomux_setup_multiple_pins(kzm_pins, ARRAY_SIZE(kzm_pins), "kzm"); - kzm_init_ext_uart(); - kzm_init_smsc9118(); kzm_init_imx_uart(); pr_info("Clock input source is 26MHz\n"); } +static void __init kzm_late_init(void) +{ + kzm_init_ext_uart(); + kzm_init_smsc9118(); +} + /* * This structure defines static mappings for the kzm-arm11-01 board. */ @@ -291,5 +295,6 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") .init_irq = mx31_init_irq, .init_time = kzm_timer_init, .init_machine = kzm_board_init, + .init_late = kzm_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 9986f9a697c8..5e366824814f 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -302,12 +302,16 @@ static void __init mx21ads_board_init(void) imx21_add_imx_uart0(&uart_pdata_rts); imx21_add_imx_uart2(&uart_pdata_norts); imx21_add_imx_uart3(&uart_pdata_rts); - imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); imx21_add_mxc_nand(&mx21ads_nand_board_info); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx21_add_imx_fb(&mx21ads_fb_data); +} + +static void __init mx21ads_late_init(void) +{ + imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); mx21ads_cs8900_resources[1].start = gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); @@ -328,6 +332,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS") .init_early = imx21_init_early, .init_irq = mx21_init_irq, .init_time = mx21ads_timer_init, - .init_machine = mx21ads_board_init, + .init_machine = mx21ads_board_init, + .init_late = mx21ads_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 9ef4640f3660..7ba651a9b5b8 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -485,17 +485,32 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { static void __init mx27pdk_init(void) { - int ret; imx27_soc_init(); mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); - mx27_3ds_sdhc1_enable_level_translator(); imx27_add_imx_uart0(&uart_pdata); imx27_add_fec(NULL); imx27_add_imx_keypad(&mx27_3ds_keymap_data); - imx27_add_mxc_mmc(0, &sdhc1_pdata); imx27_add_imx2_wdt(); + + imx27_add_spi_imx1(&spi2_pdata); + imx27_add_spi_imx0(&spi1_pdata); + + imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); + platform_add_devices(devices, ARRAY_SIZE(devices)); + imx27_add_imx_fb(&mx27_3ds_fb_data); + + imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata); +} + +static void __init mx27pdk_late_init(void) +{ + int ret; + + mx27_3ds_sdhc1_enable_level_translator(); + imx27_add_mxc_mmc(0, &sdhc1_pdata); + otg_phy_init(); if (otg_mode_host) { @@ -509,17 +524,12 @@ static void __init mx27pdk_init(void) if (!otg_mode_host) imx27_add_fsl_usb2_udc(&otg_device_pdata); - imx27_add_spi_imx1(&spi2_pdata); - imx27_add_spi_imx0(&spi1_pdata); mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT); spi_register_board_info(mx27_3ds_spi_devs, - ARRAY_SIZE(mx27_3ds_spi_devs)); + ARRAY_SIZE(mx27_3ds_spi_devs)); if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28))) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); - imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); - platform_add_devices(devices, ARRAY_SIZE(devices)); - imx27_add_imx_fb(&mx27_3ds_fb_data); ret = gpio_request_array(mx27_3ds_camera_gpios, ARRAY_SIZE(mx27_3ds_camera_gpios)); @@ -529,7 +539,6 @@ static void __init mx27pdk_init(void) } imx27_add_mx2_camera(&mx27_3ds_cam_pdata); - imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata); imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); } @@ -547,5 +556,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK") .init_irq = mx27_init_irq, .init_time = mx27pdk_timer_init, .init_machine = mx27pdk_init, + .init_late = mx27pdk_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index a4c389eae31a..a04bb094ded1 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -352,14 +352,20 @@ static void __init mx27ads_board_init(void) i2c_register_board_info(1, mx27ads_i2c_devices, ARRAY_SIZE(mx27ads_i2c_devices)); imx27_add_imx_i2c(1, &mx27ads_i2c1_data); - mx27ads_regulator_init(); imx27_add_imx_fb(&mx27ads_fb_data); + + imx27_add_fec(NULL); + imx27_add_mxc_w1(); +} + +static void __init mx27ads_late_init(void) +{ + mx27ads_regulator_init(); + imx27_add_mxc_mmc(0, &sdhc1_pdata); imx27_add_mxc_mmc(1, &sdhc2_pdata); - imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_mxc_w1(); } static void __init mx27ads_timer_init(void) @@ -395,5 +401,6 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") .init_irq = mx27_init_irq, .init_time = mx27ads_timer_init, .init_machine = mx27ads_board_init, + .init_late = mx27ads_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 65a0dc06a97c..12b8a52c9cb4 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -694,8 +694,6 @@ static struct platform_device *devices[] __initdata = { static void __init mx31_3ds_init(void) { - int ret; - imx31_soc_init(); /* Configure SPI1 IOMUX */ @@ -708,14 +706,31 @@ static void __init mx31_3ds_init(void) imx31_add_mxc_nand(&mx31_3ds_nand_board_info); imx31_add_spi_imx1(&spi1_pdata); + + imx31_add_imx_keypad(&mx31_3ds_keymap_data); + + imx31_add_imx2_wdt(); + imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); + + imx31_add_spi_imx0(&spi0_pdata); + imx31_add_ipu_core(); + imx31_add_mx3_sdc_fb(&mx3fb_pdata); + + imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata); + + imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); +} + +static void __init mx31_3ds_late(void) +{ + int ret; + mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(mx31_3ds_spi_devs, - ARRAY_SIZE(mx31_3ds_spi_devs)); + ARRAY_SIZE(mx31_3ds_spi_devs)); platform_add_devices(devices, ARRAY_SIZE(devices)); - imx31_add_imx_keypad(&mx31_3ds_keymap_data); - mx31_3ds_usbotg_init(); if (otg_mode_host) { otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | @@ -733,14 +748,9 @@ static void __init mx31_3ds_init(void) if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1))) printk(KERN_WARNING "Init of the debug board failed, all " - "devices on the debug board are unusable.\n"); - imx31_add_imx2_wdt(); - imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); - imx31_add_mxc_mmc(0, &sdhc1_pdata); + "devices on the debug board are unusable.\n"); - imx31_add_spi_imx0(&spi0_pdata); - imx31_add_ipu_core(); - imx31_add_mx3_sdc_fb(&mx3fb_pdata); + imx31_add_mxc_mmc(0, &sdhc1_pdata); /* CSI */ /* Camera power: default - off */ @@ -752,10 +762,6 @@ static void __init mx31_3ds_init(void) } mx31_3ds_init_camera(); - - imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata); - - imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); } static void __init mx31_3ds_timer_init(void) @@ -778,6 +784,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .init_irq = mx31_init_irq, .init_time = mx31_3ds_timer_init, .init_machine = mx31_3ds_init, + .init_late = mx31_3ds_late, .reserve = mx31_3ds_reserve, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 4f2c56d44ba1..766b8b93fb97 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -554,20 +554,19 @@ static void __init mx31ads_map_io(void) iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc)); } -static void __init mx31ads_init_irq(void) -{ - mx31_init_irq(); - mx31ads_init_expio(); -} - static void __init mx31ads_init(void) { imx31_soc_init(); - mxc_init_extuart(); mxc_init_imx_uart(); - mxc_init_i2c(); mxc_init_audio(); +} + +static void __init mx31ads_late(void) +{ + mx31ads_init_expio(); + mxc_init_extuart(); + mxc_init_i2c(); mxc_init_ext_ethernet(); } @@ -581,8 +580,9 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") .atag_offset = 0x100, .map_io = mx31ads_map_io, .init_early = imx31_init_early, - .init_irq = mx31ads_init_irq, + .init_irq = mx31_init_irq, .init_time = mx31ads_timer_init, .init_machine = mx31ads_init, + .init_late = mx31ads_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index e9549a3c0223..6fd463642954 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -56,6 +56,26 @@ * appropriate baseboard support code. */ +static unsigned int mx31lilly_pins[] __initdata = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + MX31_PIN_CTS2__CTS2, + MX31_PIN_RTS2__RTS2, + MX31_PIN_TXD2__TXD2, + MX31_PIN_RXD2__RXD2, + MX31_PIN_CSPI3_MOSI__RXD3, + MX31_PIN_CSPI3_MISO__TXD3, + MX31_PIN_CSPI3_SCLK__RTS3, + MX31_PIN_CSPI3_SPI_RDY__CTS3, +}; + +/* UART */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + /* SMSC ethernet support */ static struct resource smsc91x_resources[] = { @@ -252,16 +272,12 @@ static void __init mx31lilly_board_init(void) { imx31_soc_init(); - switch (mx31lilly_baseboard) { - case MX31LILLY_NOBOARD: - break; - case MX31LILLY_DB: - mx31lilly_db_init(); - break; - default: - printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n", - mx31lilly_baseboard); - } + mxc_iomux_setup_multiple_pins(mx31lilly_pins, + ARRAY_SIZE(mx31lilly_pins), "mx31lily"); + + imx31_add_imx_uart0(&uart_pdata); + imx31_add_imx_uart1(&uart_pdata); + imx31_add_imx_uart2(&uart_pdata); mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS"); @@ -284,10 +300,17 @@ static void __init mx31lilly_board_init(void) imx31_add_spi_imx0(&spi0_pdata); imx31_add_spi_imx1(&spi1_pdata); - mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); - spi_register_board_info(&mc13783_dev, 1); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); +} + +static void __init mx31lilly_late_init(void) +{ + if (mx31lilly_baseboard == MX31LILLY_DB) + mx31lilly_db_init(); + + mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); + spi_register_board_info(&mc13783_dev, 1); smsc91x_resources[1].start = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); @@ -310,6 +333,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131") .init_early = imx31_init_early, .init_irq = mx31_init_irq, .init_time = mx31lilly_timer_init, - .init_machine = mx31lilly_board_init, + .init_machine = mx31lilly_board_init, + .init_late = mx31lilly_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 4822a1738de4..f033a57d5694 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -52,6 +52,19 @@ */ static unsigned int mx31lite_pins[] = { + /* UART1 */ + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1, + /* SPI 0 */ + MX31_PIN_CSPI1_SCLK__SCLK, + MX31_PIN_CSPI1_MOSI__MOSI, + MX31_PIN_CSPI1_MISO__MISO, + MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI1_SS0__SS0, + MX31_PIN_CSPI1_SS1__SS1, + MX31_PIN_CSPI1_SS2__SS2, /* LAN9117 IRQ pin */ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* SPI 1 */ @@ -64,6 +77,23 @@ static unsigned int mx31lite_pins[] = { MX31_PIN_CSPI2_SS2__SS2, }; +/* UART */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* SPI */ +static int spi0_internal_chipselect[] = { + MXC_SPI_CS(0), + MXC_SPI_CS(1), + MXC_SPI_CS(2), +}; + +static const struct spi_imx_master spi0_pdata __initconst = { + .chipselect = spi0_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi0_internal_chipselect), +}; + static const struct mxc_nand_platform_data mx31lite_nand_board_info __initconst = { .width = 1, @@ -103,13 +133,13 @@ static struct platform_device smsc911x_device = { * The MC13783 is the only hard-wired SPI device on the module. */ -static int spi_internal_chipselect[] = { +static int spi1_internal_chipselect[] = { MXC_SPI_CS(0), }; static const struct spi_imx_master spi1_pdata __initconst = { - .chipselect = spi_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), + .chipselect = spi1_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect), }; static struct mc13xxx_platform_data mc13783_pdata __initdata = { @@ -200,8 +230,6 @@ static struct platform_device physmap_flash_device = { .num_resources = 1, }; - - /* * This structure defines the MX31 memory map. */ @@ -233,29 +261,30 @@ static struct regulator_consumer_supply dummy_supplies[] = { static void __init mx31lite_init(void) { - int ret; - imx31_soc_init(); - switch (mx31lite_baseboard) { - case MX31LITE_NOBOARD: - break; - case MX31LITE_DB: - mx31lite_db_init(); - break; - default: - printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n", - mx31lite_baseboard); - } - mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins), "mx31lite"); + imx31_add_imx_uart0(&uart_pdata); + imx31_add_spi_imx0(&spi0_pdata); + /* NOR and NAND flash */ platform_device_register(&physmap_flash_device); imx31_add_mxc_nand(&mx31lite_nand_board_info); imx31_add_spi_imx1(&spi1_pdata); + + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); +} + +static void __init mx31lite_late(void) +{ + int ret; + + if (mx31lite_baseboard == MX31LITE_DB) + mx31lite_db_init(); + mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(&mc13783_spi_dev, 1); @@ -265,8 +294,6 @@ static void __init mx31lite_init(void) if (usbh2_pdata.otg) imx31_add_mxc_ehci_hs(2, &usbh2_pdata); - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - /* SMSC9117 IRQ pin */ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq"); if (ret) @@ -294,5 +321,6 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") .init_irq = mx31_init_irq, .init_time = mx31lite_timer_init, .init_machine = mx31lite_init, + .init_late = mx31lite_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 4f2d99888afd..cc867682520e 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -526,11 +526,9 @@ static void __init mx31moboard_init(void) "moboard"); platform_add_devices(devices, ARRAY_SIZE(devices)); - gpio_led_register_device(-1, &mx31moboard_led_pdata); imx31_add_imx2_wdt(); - moboard_uart0_init(); imx31_add_imx_uart0(&uart0_pdata); imx31_add_imx_uart4(&uart4_pdata); @@ -540,6 +538,19 @@ static void __init mx31moboard_init(void) imx31_add_spi_imx1(&moboard_spi1_pdata); imx31_add_spi_imx2(&moboard_spi2_pdata); + mx31moboard_init_cam(); + + imx31_add_imx_ssi(0, &moboard_ssi_pdata); + + pm_power_off = mx31moboard_poweroff; +} + +static void __init mx31moboard_late(void) +{ + gpio_led_register_device(-1, &mx31moboard_led_pdata); + + moboard_uart0_init(); + gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); moboard_spi_board_info[0].irq = @@ -549,18 +560,11 @@ static void __init mx31moboard_init(void) imx31_add_mxc_mmc(0, &sdhc1_pdata); - mx31moboard_init_cam(); - usb_xcvr_reset(); - moboard_usbh2_init(); - imx31_add_imx_ssi(0, &moboard_ssi_pdata); - imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); - pm_power_off = mx31moboard_poweroff; - switch (mx31moboard_baseboard) { case MX31NOBOARD: break; @@ -601,5 +605,6 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .init_irq = mx31_init_irq, .init_time = mx31moboard_timer_init, .init_machine = mx31moboard_init, + .init_late = mx31moboard_late, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 7e315f00648d..c8c2e0956048 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -555,8 +555,6 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { */ static void __init mx35_3ds_init(void) { - struct platform_device *imx35_fb_pdev; - imx35_soc_init(); mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); @@ -579,9 +577,6 @@ static void __init mx35_3ds_init(void) imx35_add_mxc_nand(&mx35pdk_nand_board_info); imx35_add_sdhci_esdhc_imx(0, NULL); - if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1))) - pr_warn("Init of the debugboard failed, all " - "devices on the debugboard are unusable.\n"); imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); i2c_register_board_info( @@ -590,6 +585,15 @@ static void __init mx35_3ds_init(void) imx35_add_ipu_core(); platform_device_register(&mx35_3ds_ov2640); imx35_3ds_init_camera(); +} + +static void __init mx35_3ds_late_init(void) +{ + struct platform_device *imx35_fb_pdev; + + if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1))) + pr_warn("Init of the debugboard failed, all " + "devices on the debugboard are unusable.\n"); imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata); mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev; @@ -618,6 +622,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .init_irq = mx35_init_irq, .init_time = mx35pdk_timer_init, .init_machine = mx35_3ds_init, + .init_late = mx35_3ds_late_init, .reserve = mx35_3ds_reserve, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 2d1c50bd8bdf..ed675863655b 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -362,12 +362,8 @@ static void __init pca100_init(void) if (ret) printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); - imx27_add_imx_ssi(0, &pca100_ssi_pdata); - imx27_add_imx_uart0(&uart_pdata); - imx27_add_mxc_mmc(1, &sdhc_pdata); - imx27_add_mxc_nand(&pca100_nand_board_info); /* only the i2c master 1 is used on this CPU card */ @@ -382,6 +378,19 @@ static void __init pca100_init(void) ARRAY_SIZE(pca100_spi_board_info)); imx27_add_spi_imx0(&pca100_spi0_data); + imx27_add_imx_fb(&pca100_fb_data); + + imx27_add_fec(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); +} + +static void __init pca100_late_init(void) +{ + imx27_add_imx_ssi(0, &pca100_ssi_pdata); + + imx27_add_mxc_mmc(1, &sdhc_pdata); + gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); gpio_direction_output(OTG_PHY_CS_GPIO, 1); gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs"); @@ -403,12 +412,6 @@ static void __init pca100_init(void) if (usbh2_pdata.otg) imx27_add_mxc_ehci_hs(2, &usbh2_pdata); - - imx27_add_imx_fb(&pca100_fb_data); - - imx27_add_fec(NULL); - imx27_add_imx2_wdt(); - imx27_add_mxc_w1(); } static void __init pca100_timer_init(void) @@ -421,7 +424,8 @@ MACHINE_START(PCA100, "phyCARD-i.MX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .init_machine = pca100_init, + .init_machine = pca100_init, + .init_late = pca100_late_init, .init_time = pca100_timer_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 6d879417db49..9f0f55b0422c 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -149,7 +149,7 @@ static unsigned int pcm037_pins[] = { MX31_PIN_CONTRAST__CONTRAST, MX31_PIN_D3_SPL__D3_SPL, MX31_PIN_D3_CLS__D3_CLS, - MX31_PIN_LCS0__GPI03_23, + MX31_PIN_LCS0__GPIO3_23, /* CSI */ IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO), MX31_PIN_CSI_D6__CSI_D6, @@ -576,8 +576,6 @@ static struct regulator_consumer_supply dummy_supplies[] = { */ static void __init pcm037_init(void) { - int ret; - imx31_soc_init(); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); @@ -621,20 +619,6 @@ static void __init pcm037_init(void) imx31_add_mxc_w1(); - /* LAN9217 IRQ pin */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); - if (ret) - pr_warn("could not get LAN irq gpio\n"); - else { - gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); - smsc911x_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); - smsc911x_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); - platform_device_register(&pcm037_eth); - } - - /* I2C adapters and devices */ i2c_register_board_info(1, pcm037_i2c_devices, ARRAY_SIZE(pcm037_i2c_devices)); @@ -643,26 +627,9 @@ static void __init pcm037_init(void) imx31_add_imx_i2c2(&pcm037_i2c2_data); imx31_add_mxc_nand(&pcm037_nand_board_info); - imx31_add_mxc_mmc(0, &sdhc_pdata); imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); - /* CSI */ - /* Camera power: default - off */ - ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power"); - if (!ret) - gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); - else - iclink_mt9t031.power = NULL; - - pcm037_init_camera(); - - pcm970_sja1000_resources[1].start = - gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); - pcm970_sja1000_resources[1].end = - gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); - platform_device_register(&pcm970_sja1000); - if (otg_mode_host) { otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); @@ -677,7 +644,6 @@ static void __init pcm037_init(void) if (!otg_mode_host) imx31_add_fsl_usb2_udc(&otg_device_pdata); - } static void __init pcm037_timer_init(void) @@ -694,6 +660,39 @@ static void __init pcm037_reserve(void) static void __init pcm037_init_late(void) { + int ret; + + /* LAN9217 IRQ pin */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq"); + if (!ret) { + gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + platform_device_register(&pcm037_eth); + } else { + pr_warn("could not get LAN irq gpio\n"); + } + + imx31_add_mxc_mmc(0, &sdhc_pdata); + + /* CSI */ + /* Camera power: default - off */ + ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power"); + if (!ret) + gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1); + else + iclink_mt9t031.power = NULL; + + pcm037_init_camera(); + + pcm970_sja1000_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); + pcm970_sja1000_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); + platform_device_register(&pcm970_sja1000); + pcm037_eet_init_devices(); } diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index e447e59c0604..78e2bf8dcd96 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -363,7 +363,6 @@ static void __init pcm043_init(void) imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&pcm037_nand_board_info); - imx35_add_imx_ssi(0, &pcm043_ssi_pdata); imx35_add_imx_uart1(&uart_pdata); @@ -387,6 +386,12 @@ static void __init pcm043_init(void) imx35_add_fsl_usb2_udc(&otg_device_pdata); imx35_add_flexcan1(); +} + +static void __init pcm043_late_init(void) +{ + imx35_add_imx_ssi(0, &pcm043_ssi_pdata); + imx35_add_sdhci_esdhc_imx(0, &sd1_pdata); } @@ -402,6 +407,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043") .init_early = imx35_init_early, .init_irq = mx35_init_irq, .init_time = pcm043_timer_init, - .init_machine = pcm043_init, + .init_machine = pcm043_init, + .init_late = pcm043_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 34df64f133ed..8c2cbd693d21 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -251,7 +251,6 @@ static void __init qong_init(void) mxc_init_imx_uart(); qong_init_nor_mtd(); - qong_init_fpga(); imx31_add_imx2_wdt(); } @@ -268,5 +267,6 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .init_irq = mx31_init_irq, .init_time = qong_timer_init, .init_machine = qong_init, + .init_late = qong_init_fpga, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c deleted file mode 100644 index 1f6bc3f7ae14..000000000000 --- a/arch/arm/mach-imx/mach-scb9328.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * linux/arch/arm/mach-mx1/mach-scb9328.c - * - * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> - * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/interrupt.h> -#include <linux/dm9000.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx1.h" -#include "hardware.h" -#include "iomux-mx1.h" - -/* - * This scb9328 has a 32MiB flash - */ -static struct resource flash_resource = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1, - .flags = IORESOURCE_MEM, -}; - -static struct physmap_flash_data scb_flash_data = { - .width = 2, -}; - -static struct platform_device scb_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &scb_flash_data, - }, - .resource = &flash_resource, - .num_resources = 1, -}; - -/* - * scb9328 has a DM9000 network controller - * connected to CS5, with 16 bit data path - * and interrupt connected to GPIO 3 - */ - -/* - * internal datapath is fixed 16 bit - */ -static struct dm9000_plat_data dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, -}; - -/* - * the DM9000 drivers wants two defined address spaces - * to gain access to address latch registers and the data path. - */ -static struct resource dm9000x_resources[] = { - { - .name = "address area", - .start = MX1_CS5_PHYS, - .end = MX1_CS5_PHYS + 1, - .flags = IORESOURCE_MEM, /* address access */ - }, { - .name = "data area", - .start = MX1_CS5_PHYS + 4, - .end = MX1_CS5_PHYS + 5, - .flags = IORESOURCE_MEM, /* data access */ - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device dm9000x_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000x_resources), - .resource = dm9000x_resources, - .dev = { - .platform_data = &dm9000_platdata, - } -}; - -static const int mxc_uart1_pins[] = { - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct platform_device *devices[] __initdata = { - &scb_flash_device, - &dm9000x_device, -}; - -/* - * scb9328_init - Init the CPU card itself - */ -static void __init scb9328_init(void) -{ - imx1_soc_init(); - - mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); - - imx1_add_imx_uart0(&uart_pdata); - - printk(KERN_INFO"Scb9328: Adding devices\n"); - dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3)); - dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3)); - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init scb9328_timer_init(void) -{ - mx1_clocks_init(32000); -} - -MACHINE_START(SCB9328, "Synertronixx scb9328") - /* Sascha Hauer */ - .atag_offset = 100, - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = scb9328_timer_init, - .init_machine = scb9328_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 27a8f7e3ec08..5ff154c9a086 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -268,6 +268,22 @@ static void __init vpr200_board_init(void) imx35_add_fec(NULL); imx35_add_imx2_wdt(); + + imx35_add_imx_uart0(NULL); + imx35_add_imx_uart2(NULL); + + imx35_add_ipu_core(); + imx35_add_mx3_sdc_fb(&mx3fb_pdata); + + imx35_add_fsl_usb2_udc(&otg_device_pdata); + imx35_add_mxc_ehci_hs(&usb_host_pdata); + + imx35_add_mxc_nand(&vpr200_nand_board_info); + imx35_add_sdhci_esdhc_imx(0, NULL); +} + +static void __init vpr200_late_init(void) +{ imx_add_gpio_keys(&vpr200_gpio_keys_data); platform_add_devices(devices, ARRAY_SIZE(devices)); @@ -282,18 +298,6 @@ static void __init vpr200_board_init(void) else gpio_direction_input(GPIO_PMIC_INT); - imx35_add_imx_uart0(NULL); - imx35_add_imx_uart2(NULL); - - imx35_add_ipu_core(); - imx35_add_mx3_sdc_fb(&mx3fb_pdata); - - imx35_add_fsl_usb2_udc(&otg_device_pdata); - imx35_add_mxc_ehci_hs(&usb_host_pdata); - - imx35_add_mxc_nand(&vpr200_nand_board_info); - imx35_add_sdhci_esdhc_imx(0, NULL); - vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT); i2c_register_board_info(0, vpr200_i2c_devices, ARRAY_SIZE(vpr200_i2c_devices)); @@ -313,5 +317,6 @@ MACHINE_START(VPR200, "VPR200") .init_irq = mx35_init_irq, .init_time = vpr200_timer_init, .init_machine = vpr200_board_init, + .init_late = vpr200_late_init, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c deleted file mode 100644 index 9a42f19be81e..000000000000 --- a/arch/arm/mach-imx/mm-imx1.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX1 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/pinctrl/machine.h> - -#include <asm/mach/map.h> - -#include "common.h" -#include "devices/devices-common.h" -#include "hardware.h" -#include "iomux-v1.h" - -static struct map_desc imx_io_desc[] __initdata = { - imx_map_entry(MX1, IO, MT_DEVICE), -}; - -void __init mx1_map_io(void) -{ - iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); -} - -void __init imx1_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX1); - imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR), - MX1_NUM_GPIO_PORT); -} - -void __init mx1_init_irq(void) -{ - mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); -} - -void __init imx1_soc_init(void) -{ - imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); - mxc_device_init(); - - mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTA, 0); - mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTB, 0); - mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTC, 0); - mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTD, 0); - imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR, - MX1_DMA_INT, MX1_DMA_ERR); - pinctrl_provide_dummies(); -} diff --git a/arch/arm/mach-imx/mx1.h b/arch/arm/mach-imx/mx1.h deleted file mode 100644 index 45bd31cc34d6..000000000000 --- a/arch/arm/mach-imx/mx1.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright (C) 1997,1998 Russell King - * Copyright (C) 1999 ARM Limited - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MX1_H__ -#define __MACH_MX1_H__ - -/* - * Memory map - */ -#define MX1_IO_BASE_ADDR 0x00200000 -#define MX1_IO_SIZE SZ_1M - -#define MX1_CS0_PHYS 0x10000000 -#define MX1_CS0_SIZE 0x02000000 - -#define MX1_CS1_PHYS 0x12000000 -#define MX1_CS1_SIZE 0x01000000 - -#define MX1_CS2_PHYS 0x13000000 -#define MX1_CS2_SIZE 0x01000000 - -#define MX1_CS3_PHYS 0x14000000 -#define MX1_CS3_SIZE 0x01000000 - -#define MX1_CS4_PHYS 0x15000000 -#define MX1_CS4_SIZE 0x01000000 - -#define MX1_CS5_PHYS 0x16000000 -#define MX1_CS5_SIZE 0x01000000 - -/* - * Register BASEs, based on OFFSETs - */ -#define MX1_AIPI1_BASE_ADDR (0x00000 + MX1_IO_BASE_ADDR) -#define MX1_WDT_BASE_ADDR (0x01000 + MX1_IO_BASE_ADDR) -#define MX1_TIM1_BASE_ADDR (0x02000 + MX1_IO_BASE_ADDR) -#define MX1_TIM2_BASE_ADDR (0x03000 + MX1_IO_BASE_ADDR) -#define MX1_RTC_BASE_ADDR (0x04000 + MX1_IO_BASE_ADDR) -#define MX1_LCDC_BASE_ADDR (0x05000 + MX1_IO_BASE_ADDR) -#define MX1_UART1_BASE_ADDR (0x06000 + MX1_IO_BASE_ADDR) -#define MX1_UART2_BASE_ADDR (0x07000 + MX1_IO_BASE_ADDR) -#define MX1_PWM_BASE_ADDR (0x08000 + MX1_IO_BASE_ADDR) -#define MX1_DMA_BASE_ADDR (0x09000 + MX1_IO_BASE_ADDR) -#define MX1_AIPI2_BASE_ADDR (0x10000 + MX1_IO_BASE_ADDR) -#define MX1_SIM_BASE_ADDR (0x11000 + MX1_IO_BASE_ADDR) -#define MX1_USBD_BASE_ADDR (0x12000 + MX1_IO_BASE_ADDR) -#define MX1_CSPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR) -#define MX1_MMC_BASE_ADDR (0x14000 + MX1_IO_BASE_ADDR) -#define MX1_ASP_BASE_ADDR (0x15000 + MX1_IO_BASE_ADDR) -#define MX1_BTA_BASE_ADDR (0x16000 + MX1_IO_BASE_ADDR) -#define MX1_I2C_BASE_ADDR (0x17000 + MX1_IO_BASE_ADDR) -#define MX1_SSI_BASE_ADDR (0x18000 + MX1_IO_BASE_ADDR) -#define MX1_CSPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR) -#define MX1_MSHC_BASE_ADDR (0x1A000 + MX1_IO_BASE_ADDR) -#define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR) -#define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR) -#define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) -#define MX1_GPIO1_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) -#define MX1_GPIO2_BASE_ADDR (0x1C100 + MX1_IO_BASE_ADDR) -#define MX1_GPIO3_BASE_ADDR (0x1C200 + MX1_IO_BASE_ADDR) -#define MX1_GPIO4_BASE_ADDR (0x1C300 + MX1_IO_BASE_ADDR) -#define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR) -#define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR) -#define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR) -#define MX1_AVIC_BASE_ADDR (0x23000 + MX1_IO_BASE_ADDR) -#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR) - -/* macro to get at IO space when running virtually */ -#define MX1_IO_P2V(x) IMX_IO_P2V(x) -#define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x)) - -/* fixed interrput numbers */ -#include <asm/irq.h> -#define MX1_INT_SOFTINT (NR_IRQS_LEGACY + 0) -#define MX1_INT_CSI (NR_IRQS_LEGACY + 6) -#define MX1_DSPA_MAC_INT (NR_IRQS_LEGACY + 7) -#define MX1_DSPA_INT (NR_IRQS_LEGACY + 8) -#define MX1_COMP_INT (NR_IRQS_LEGACY + 9) -#define MX1_MSHC_XINT (NR_IRQS_LEGACY + 10) -#define MX1_GPIO_INT_PORTA (NR_IRQS_LEGACY + 11) -#define MX1_GPIO_INT_PORTB (NR_IRQS_LEGACY + 12) -#define MX1_GPIO_INT_PORTC (NR_IRQS_LEGACY + 13) -#define MX1_INT_LCDC (NR_IRQS_LEGACY + 14) -#define MX1_SIM_INT (NR_IRQS_LEGACY + 15) -#define MX1_SIM_DATA_INT (NR_IRQS_LEGACY + 16) -#define MX1_RTC_INT (NR_IRQS_LEGACY + 17) -#define MX1_RTC_SAMINT (NR_IRQS_LEGACY + 18) -#define MX1_INT_UART2PFERR (NR_IRQS_LEGACY + 19) -#define MX1_INT_UART2RTS (NR_IRQS_LEGACY + 20) -#define MX1_INT_UART2DTR (NR_IRQS_LEGACY + 21) -#define MX1_INT_UART2UARTC (NR_IRQS_LEGACY + 22) -#define MX1_INT_UART2TX (NR_IRQS_LEGACY + 23) -#define MX1_INT_UART2RX (NR_IRQS_LEGACY + 24) -#define MX1_INT_UART1PFERR (NR_IRQS_LEGACY + 25) -#define MX1_INT_UART1RTS (NR_IRQS_LEGACY + 26) -#define MX1_INT_UART1DTR (NR_IRQS_LEGACY + 27) -#define MX1_INT_UART1UARTC (NR_IRQS_LEGACY + 28) -#define MX1_INT_UART1TX (NR_IRQS_LEGACY + 29) -#define MX1_INT_UART1RX (NR_IRQS_LEGACY + 30) -#define MX1_VOICE_DAC_INT (NR_IRQS_LEGACY + 31) -#define MX1_VOICE_ADC_INT (NR_IRQS_LEGACY + 32) -#define MX1_PEN_DATA_INT (NR_IRQS_LEGACY + 33) -#define MX1_PWM_INT (NR_IRQS_LEGACY + 34) -#define MX1_SDHC_INT (NR_IRQS_LEGACY + 35) -#define MX1_INT_I2C (NR_IRQS_LEGACY + 39) -#define MX1_INT_CSPI2 (NR_IRQS_LEGACY + 40) -#define MX1_INT_CSPI1 (NR_IRQS_LEGACY + 41) -#define MX1_SSI_TX_INT (NR_IRQS_LEGACY + 42) -#define MX1_SSI_TX_ERR_INT (NR_IRQS_LEGACY + 43) -#define MX1_SSI_RX_INT (NR_IRQS_LEGACY + 44) -#define MX1_SSI_RX_ERR_INT (NR_IRQS_LEGACY + 45) -#define MX1_TOUCH_INT (NR_IRQS_LEGACY + 46) -#define MX1_INT_USBD0 (NR_IRQS_LEGACY + 47) -#define MX1_INT_USBD1 (NR_IRQS_LEGACY + 48) -#define MX1_INT_USBD2 (NR_IRQS_LEGACY + 49) -#define MX1_INT_USBD3 (NR_IRQS_LEGACY + 50) -#define MX1_INT_USBD4 (NR_IRQS_LEGACY + 51) -#define MX1_INT_USBD5 (NR_IRQS_LEGACY + 52) -#define MX1_INT_USBD6 (NR_IRQS_LEGACY + 53) -#define MX1_BTSYS_INT (NR_IRQS_LEGACY + 55) -#define MX1_BTTIM_INT (NR_IRQS_LEGACY + 56) -#define MX1_BTWUI_INT (NR_IRQS_LEGACY + 57) -#define MX1_TIM2_INT (NR_IRQS_LEGACY + 58) -#define MX1_TIM1_INT (NR_IRQS_LEGACY + 59) -#define MX1_DMA_ERR (NR_IRQS_LEGACY + 60) -#define MX1_DMA_INT (NR_IRQS_LEGACY + 61) -#define MX1_GPIO_INT_PORTD (NR_IRQS_LEGACY + 62) -#define MX1_WDT_INT (NR_IRQS_LEGACY + 63) - -/* DMA */ -#define MX1_DMA_REQ_UART3_T 2 -#define MX1_DMA_REQ_UART3_R 3 -#define MX1_DMA_REQ_SSI2_T 4 -#define MX1_DMA_REQ_SSI2_R 5 -#define MX1_DMA_REQ_CSI_STAT 6 -#define MX1_DMA_REQ_CSI_R 7 -#define MX1_DMA_REQ_MSHC 8 -#define MX1_DMA_REQ_DSPA_DCT_DOUT 9 -#define MX1_DMA_REQ_DSPA_DCT_DIN 10 -#define MX1_DMA_REQ_DSPA_MAC 11 -#define MX1_DMA_REQ_EXT 12 -#define MX1_DMA_REQ_SDHC 13 -#define MX1_DMA_REQ_SPI1_R 14 -#define MX1_DMA_REQ_SPI1_T 15 -#define MX1_DMA_REQ_SSI_T 16 -#define MX1_DMA_REQ_SSI_R 17 -#define MX1_DMA_REQ_ASP_DAC 18 -#define MX1_DMA_REQ_ASP_ADC 19 -#define MX1_DMA_REQ_USP_EP(x) (20 + (x)) -#define MX1_DMA_REQ_SPI2_R 26 -#define MX1_DMA_REQ_SPI2_T 27 -#define MX1_DMA_REQ_UART2_T 28 -#define MX1_DMA_REQ_UART2_R 29 -#define MX1_DMA_REQ_UART1_T 30 -#define MX1_DMA_REQ_UART1_R 31 - -/* - * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS - * to not break drivers/usb/gadget/imx_udc. Should go - * away after this driver uses the new name. - */ -#define USBD_INT0 MX1_INT_USBD0 - -#endif /* ifndef __MACH_MX1_H__ */ diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c index 649fe49ce85e..231f900a1de7 100644 --- a/arch/arm/mach-imx/mx31lilly-db.c +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -43,18 +43,6 @@ */ static unsigned int lilly_db_board_pins[] __initdata = { - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - MX31_PIN_CTS2__CTS2, - MX31_PIN_RTS2__RTS2, - MX31_PIN_TXD2__TXD2, - MX31_PIN_RXD2__RXD2, - MX31_PIN_CSPI3_MOSI__RXD3, - MX31_PIN_CSPI3_MISO__TXD3, - MX31_PIN_CSPI3_SCLK__RTS3, - MX31_PIN_CSPI3_SPI_RDY__CTS3, MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2, MX31_PIN_SD1_DATA1__SD1_DATA1, @@ -86,11 +74,6 @@ static unsigned int lilly_db_board_pins[] __initdata = { MX31_PIN_CONTRAST__CONTRAST, }; -/* UART */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - /* MMC support */ static int mxc_mmc1_get_ro(struct device *dev) @@ -203,9 +186,6 @@ void __init mx31lilly_db_init(void) mxc_iomux_setup_multiple_pins(lilly_db_board_pins, ARRAY_SIZE(lilly_db_board_pins), "development board pins"); - imx31_add_imx_uart0(&uart_pdata); - imx31_add_imx_uart1(&uart_pdata); - imx31_add_imx_uart2(&uart_pdata); imx31_add_mxc_mmc(0, &mmc_pdata); mx31lilly_init_fb(); } diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index 5a160b7e4fce..c66a006bf2fd 100644 --- a/arch/arm/mach-imx/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -45,19 +45,6 @@ */ static unsigned int litekit_db_board_pins[] __initdata = { - /* UART1 */ - MX31_PIN_CTS1__CTS1, - MX31_PIN_RTS1__RTS1, - MX31_PIN_TXD1__TXD1, - MX31_PIN_RXD1__RXD1, - /* SPI 0 */ - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS0__SS0, - MX31_PIN_CSPI1_SS1__SS1, - MX31_PIN_CSPI1_SS2__SS2, /* SDHC1 */ MX31_PIN_SD1_DATA0__SD1_DATA0, MX31_PIN_SD1_DATA1__SD1_DATA1, @@ -67,11 +54,6 @@ static unsigned int litekit_db_board_pins[] __initdata = { MX31_PIN_SD1_CMD__SD1_CMD, }; -/* UART */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - /* MMC */ static int gpio_det, gpio_wp; @@ -146,19 +128,6 @@ static const struct imxmmc_platform_data mmc_pdata __initconst = { .exit = mxc_mmc1_exit, }; -/* SPI */ - -static int spi_internal_chipselect[] = { - MXC_SPI_CS(0), - MXC_SPI_CS(1), - MXC_SPI_CS(2), -}; - -static const struct spi_imx_master spi0_pdata __initconst = { - .chipselect = spi_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi_internal_chipselect), -}; - /* GPIO LEDs */ static const struct gpio_led litekit_leds[] __initconst = { @@ -187,9 +156,7 @@ void __init mx31lite_db_init(void) mxc_iomux_setup_multiple_pins(litekit_db_board_pins, ARRAY_SIZE(litekit_db_board_pins), "development board pins"); - imx31_add_imx_uart0(&uart_pdata); imx31_add_mxc_mmc(0, &mmc_pdata); - imx31_add_spi_imx0(&spi0_pdata); gpio_led_register_device(-1, &litekit_led_platform_data); imx31_add_imx2_wdt(); imx31_add_mxc_rtc(); diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index fe708e26d021..1515e498d348 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -217,7 +217,7 @@ struct imx6_cpu_pm_info { u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */ } __aligned(8); -void imx6q_set_int_mem_clk_lpm(bool enable) +void imx6_set_int_mem_clk_lpm(bool enable) { u32 val = readl_relaxed(ccm_base + CGPR); @@ -367,7 +367,7 @@ static int imx6q_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_STANDBY: imx6_set_lpm(STOP_POWER_ON); - imx6q_set_int_mem_clk_lpm(true); + imx6_set_int_mem_clk_lpm(true); imx_gpc_pre_suspend(false); if (cpu_is_imx6sl()) imx6sl_set_wait_clk(true); @@ -380,7 +380,7 @@ static int imx6q_pm_enter(suspend_state_t state) break; case PM_SUSPEND_MEM: imx6_set_lpm(STOP_POWER_OFF); - imx6q_set_int_mem_clk_lpm(false); + imx6_set_int_mem_clk_lpm(false); imx6q_enable_wb(true); /* * For suspend into ocram, asm code already take care of @@ -398,7 +398,7 @@ static int imx6q_pm_enter(suspend_state_t state) imx_gpc_post_resume(); imx6_enable_rbc(false); imx6q_enable_wb(false); - imx6q_set_int_mem_clk_lpm(true); + imx6_set_int_mem_clk_lpm(true); imx6_set_lpm(WAIT_CLOCKED); break; default: diff --git a/arch/arm/mach-imx/ssi-fiq-ksym.c b/arch/arm/mach-imx/ssi-fiq-ksym.c deleted file mode 100644 index 792090f9a032..000000000000 --- a/arch/arm/mach-imx/ssi-fiq-ksym.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Exported ksyms for the SSI FIQ handler - * - * Copyright (C) 2009, Sascha Hauer <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> - -#include <linux/platform_data/asoc-imx-ssi.h> - -EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer); -EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer); -EXPORT_SYMBOL(imx_ssi_fiq_start); -EXPORT_SYMBOL(imx_ssi_fiq_end); -EXPORT_SYMBOL(imx_ssi_fiq_base); - diff --git a/arch/arm/mach-imx/ssi-fiq.S b/arch/arm/mach-imx/ssi-fiq.S index a8b93c5f29b5..fd7917f1c204 100644 --- a/arch/arm/mach-imx/ssi-fiq.S +++ b/arch/arm/mach-imx/ssi-fiq.S @@ -8,6 +8,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/export.h> /* * r8 = bit 0-15: tx offset, bit 16-31: tx buffer size @@ -144,4 +145,8 @@ imx_ssi_fiq_tx_buffer: .word 0x0 .L_imx_ssi_fiq_end: imx_ssi_fiq_end: - +EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer) +EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer) +EXPORT_SYMBOL(imx_ssi_fiq_start) +EXPORT_SYMBOL(imx_ssi_fiq_end) +EXPORT_SYMBOL(imx_ssi_fiq_base) |