summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt58
-rw-r--r--Documentation/devicetree/bindings/display/connector/dvi-connector.txt1
-rw-r--r--Documentation/devicetree/bindings/display/msm/dsi.txt26
-rw-r--r--Documentation/devicetree/bindings/display/renesas,du.txt35
-rw-r--r--Documentation/devicetree/overlay-notes.txt4
-rw-r--r--Documentation/gpu/todo.rst7
6 files changed, 103 insertions, 28 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
new file mode 100644
index 000000000000..4f0ab3ed3b6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
@@ -0,0 +1,58 @@
+Renesas R-Car LVDS Encoder
+==========================
+
+These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
+Gen2, R-Car Gen3 and RZ/G SoCs.
+
+Required properties:
+
+- compatible : Shall contain one of
+ - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders
+ - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders
+ - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders
+ - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders
+ - "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders
+ - "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders
+ - "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders
+ - "renesas,r8a77995-lvds" for R8A77995 (R-Car D3) compatible LVDS encoders
+
+- reg: Base address and length for the memory-mapped registers
+- clocks: A phandle + clock-specifier pair for the functional clock
+- resets: A phandle + reset specifier for the module reset
+
+Required nodes:
+
+The LVDS encoder has two video ports. Their connections are modelled using the
+OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 corresponds to the parallel RGB input
+- Video port 1 corresponds to the LVDS output
+
+Each port shall have a single endpoint.
+
+
+Example:
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7790-lvds";
+ reg = <0 0xfeb90000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 726>;
+ resets = <&cpg 726>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
index fc53f7c60bc6..207e42e9eba0 100644
--- a/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
+++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
@@ -10,6 +10,7 @@ Optional properties:
- analog: the connector has DVI analog pins
- digital: the connector has DVI digital pins
- dual-link: the connector has pins for DVI dual-link
+- hpd-gpios: HPD GPIO number
Required nodes:
- Video port for DVI input
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index a6671bd2c85a..518e9cdf0d4b 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -7,8 +7,6 @@ Required properties:
- reg: Physical base address and length of the registers of controller
- reg-names: The names of register regions. The following regions are required:
* "dsi_ctrl"
-- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
- be 0 or 1, since we have 2 DSI controllers at most for now.
- interrupts: The interrupt signal from the DSI block.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks.
@@ -22,6 +20,8 @@ Required properties:
* "core"
For DSIv2, we need an additional clock:
* "src"
+ For DSI6G v2.0 onwards, we need also need the clock:
+ * "byte_intf"
- assigned-clocks: Parents of "byte" and "pixel" for the given platform.
- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
by a DSI PHY block. See [1] for details on clock bindings.
@@ -88,21 +88,35 @@ Required properties:
* "qcom,dsi-phy-28nm-lp"
* "qcom,dsi-phy-20nm"
* "qcom,dsi-phy-28nm-8960"
-- reg: Physical base address and length of the registers of PLL, PHY and PHY
- regulator
+ * "qcom,dsi-phy-14nm"
+ * "qcom,dsi-phy-10nm"
+- reg: Physical base address and length of the registers of PLL, PHY. Some
+ revisions require the PHY regulator base address, whereas others require the
+ PHY lane base address. See below for each PHY revision.
- reg-names: The names of register regions. The following regions are required:
+ For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY:
* "dsi_pll"
* "dsi_phy"
* "dsi_phy_regulator"
+ For DSI 14nm and 10nm PHYs:
+ * "dsi_pll"
+ * "dsi_phy"
+ * "dsi_phy_lane"
- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
2 clocks: A byte clock (index 0), and a pixel clock (index 1).
-- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should
- be 0 or 1, since we have 2 DSI PHYs at most for now.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks. See [1] for details on clock bindings.
- clock-names: the following clocks are required:
* "iface"
+ For 28nm HPM/LP, 28nm 8960 PHYs:
+- vddio-supply: phandle to vdd-io regulator device node
+ For 20nm PHY:
- vddio-supply: phandle to vdd-io regulator device node
+- vcca-supply: phandle to vcca regulator device node
+ For 14nm PHY:
+- vcca-supply: phandle to vcca regulator device node
+ For 10nm PHY:
+- vdds-supply: phandle to vdds regulator device node
Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index cd48aba3bc8c..c9cd17f99702 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -13,13 +13,10 @@ Required Properties:
- "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
- "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
- "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
+ - "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
+ - "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU
- - reg: A list of base address and length of each memory resource, one for
- each entry in the reg-names property.
- - reg-names: Name of the memory resources. The DU requires one memory
- resource for the DU core (named "du") and one memory resource for each
- LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
- index).
+ - reg: the memory-mapped I/O registers base address and length
- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifiers for the DU interrupts.
@@ -29,14 +26,13 @@ Required Properties:
- clock-names: Name of the clocks. This property is model-dependent.
- R8A7779 uses a single functional clock. The clock doesn't need to be
named.
- - All other DU instances use one functional clock per channel and one
- clock per LVDS encoder (if available). The functional clocks must be
- named "du.x" with "x" being the channel numerical index. The LVDS clocks
- must be named "lvds.x" with "x" being the LVDS encoder numerical index.
- - In addition to the functional and encoder clocks, all DU versions also
- support externally supplied pixel clocks. Those clocks are optional.
- When supplied they must be named "dclkin.x" with "x" being the input
- clock numerical index.
+ - All other DU instances use one functional clock per channel The
+ functional clocks must be named "du.x" with "x" being the channel
+ numerical index.
+ - In addition to the functional clocks, all DU versions also support
+ externally supplied pixel clocks. Those clocks are optional. When
+ supplied they must be named "dclkin.x" with "x" being the input clock
+ numerical index.
- vsps: A list of phandle and channel index tuples to the VSPs that handle
the memory interfaces for the DU channels. The phandle identifies the VSP
@@ -63,15 +59,15 @@ corresponding to each DU output.
R8A7794 (R-Car E2) DPAD 0 DPAD 1 - -
R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0
R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 -
+ R8A77970 (R-Car V3M) DPAD 0 LVDS 0 - -
+ R8A77995 (R-Car D3) DPAD 0 LVDS 0 LVDS 1 -
Example: R8A7795 (R-Car H3) ES2.0 DU
du: display@feb00000 {
compatible = "renesas,du-r8a7795";
- reg = <0 0xfeb00000 0 0x80000>,
- <0 0xfeb90000 0 0x14>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x80000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
@@ -79,9 +75,8 @@ Example: R8A7795 (R-Car H3) ES2.0 DU
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+ <&cpg CPG_MOD 721>;
+ clock-names = "du.0", "du.1", "du.2", "du.3";
vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
ports {
diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt
index c4aa0adf13ec..5175a24d387e 100644
--- a/Documentation/devicetree/overlay-notes.txt
+++ b/Documentation/devicetree/overlay-notes.txt
@@ -87,8 +87,8 @@ Overlay in-kernel API
The API is quite easy to use.
-1. Call of_overlay_apply() to create and apply an overlay changeset. The return
-value is an error or a cookie identifying this overlay.
+1. Call of_overlay_fdt_apply() to create and apply an overlay changeset. The
+return value is an error or a cookie identifying this overlay.
2. Call of_overlay_remove() to remove and cleanup the overlay changeset
previously created via the call to of_overlay_apply(). Removal of an overlay
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 1a0a413eeced..f4d0b3476d9c 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -450,5 +450,12 @@ See drivers/gpu/drm/amd/display/TODO for tasks.
Contact: Harry Wentland, Alex Deucher
+i915
+----
+
+- Our early/late pm callbacks could be removed in favour of using
+ device_link_add to model the dependency between i915 and snd_had. See
+ https://dri.freedesktop.org/docs/drm/driver-api/device_link.html
+
Outside DRM
===========