summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/hwmon/ds1621.c51
1 files changed, 19 insertions, 32 deletions
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index d5ac422d73b2..ccf0fe617e5f 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -63,10 +63,7 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low")
#define DS1621_ALARM_TEMP_HIGH 0x40
#define DS1621_ALARM_TEMP_LOW 0x20
-/* Conversions. Rounding and limit checking is only done on the TO_REG
- variants. Note that you should be a bit careful with which arguments
- these macros are called: arguments may be evaluated more than once.
- Fixing this is just not worth it. */
+/* Conversions */
#define ALARMS_FROM_REG(val) ((val) & \
(DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
@@ -101,7 +98,7 @@ static struct i2c_driver ds1621_driver = {
/* All registers are word-sized, except for the configuration register.
DS1621 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
+ the SMBus standard. */
static int ds1621_read_value(struct i2c_client *client, u8 reg)
{
if (reg == DS1621_REG_CONF)
@@ -110,9 +107,6 @@ static int ds1621_read_value(struct i2c_client *client, u8 reg)
return swab16(i2c_smbus_read_word_data(client, reg));
}
-/* All registers are word-sized, except for the configuration register.
- DS1621 uses a high-byte first convention, which is exactly opposite to
- the usual practice. */
static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if (reg == DS1621_REG_CONF)
@@ -204,7 +198,7 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
int kind)
{
int conf, temp;
- struct i2c_client *new_client;
+ struct i2c_client *client;
struct ds1621_data *data;
int err = 0;
@@ -221,55 +215,48 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
goto exit;
}
- new_client = &data->client;
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = &ds1621_driver;
- new_client->flags = 0;
-
+ client = &data->client;
+ i2c_set_clientdata(client, data);
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &ds1621_driver;
/* Now, we do the remaining detection. It is lousy. */
if (kind < 0) {
/* The NVB bit should be low if no EEPROM write has been
requested during the latest 10ms, which is highly
improbable in our case. */
- conf = ds1621_read_value(new_client, DS1621_REG_CONF);
+ conf = ds1621_read_value(client, DS1621_REG_CONF);
if (conf & DS1621_REG_CONFIG_NVB)
goto exit_free;
/* The 7 lowest bits of a temperature should always be 0. */
- temp = ds1621_read_value(new_client, DS1621_REG_TEMP);
+ temp = ds1621_read_value(client, DS1621_REG_TEMP);
if (temp & 0x007f)
goto exit_free;
- temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN);
+ temp = ds1621_read_value(client, DS1621_REG_TEMP_MIN);
if (temp & 0x007f)
goto exit_free;
- temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX);
+ temp = ds1621_read_value(client, DS1621_REG_TEMP_MAX);
if (temp & 0x007f)
goto exit_free;
}
- /* Determine the chip type - only one kind supported! */
- if (kind <= 0)
- kind = ds1621;
-
/* Fill in remaining client fields and put it into the global list */
- strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE);
- data->valid = 0;
+ strlcpy(client->name, "ds1621", I2C_NAME_SIZE);
mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
+ if ((err = i2c_attach_client(client)))
goto exit_free;
/* Initialize the DS1621 chip */
- ds1621_init_client(new_client);
+ ds1621_init_client(client);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &ds1621_group)))
+ if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))
goto exit_detach;
- data->class_dev = hwmon_device_register(&new_client->dev);
+ data->class_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto exit_remove_files;
@@ -278,9 +265,9 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address,
return 0;
exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &ds1621_group);
+ sysfs_remove_group(&client->dev.kobj, &ds1621_group);
exit_detach:
- i2c_detach_client(new_client);
+ i2c_detach_client(client);
exit_free:
kfree(data);
exit: