summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
diff options
context:
space:
mode:
authorArchit Taneja <architt@codeaurora.org>2017-01-03 19:45:43 +0530
committerRob Clark <robdclark@gmail.com>2017-02-06 11:28:45 -0500
commitf079f6d999cbf857f899732de680f2b62f245b8c (patch)
tree99ac7442d8e7a8533e347948943f5159d56ed1d6 /drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
parenta4df68fa232e979fb74b2efe6997d0f38cbfc626 (diff)
drm/msm/dsi: Add PHY/PLL for 8x96
Extend the DSI PHY/PLL drivers to support the DSI 14nm PHY/PLL found on 8x96. These are picked up from the downstream driver. The PHY part is similar to the other DSI PHYs. The PLL driver requires some trickery so that one DSI PLL can drive both the DSIs (i.e, dual DSI mode). In the case of dual DSI mode. One DSI instance becomes the clock master, and other the clock slave. The master PLL's output (Byte and Pixel clock) is fed to both the DSI hosts/PHYs. When the DSIs are configured in dual DSI mode, the PHY driver communicates to the PLL driver using msm_dsi_pll_set_usecase() which instance is the master and which one is the slave. When setting rate, the master PLL also configures some of the slave PLL/PHY registers which need to be identical to the master's for correct dual DSI behaviour. There are 2 PLL post dividers that should have ideally been modelled as generic clk_divider clocks, but require some customization for dual DSI. In particular, when the master PLL's post-diviers are set, the slave PLL's post-dividers need to be set too. The clk_ops for these use clk_divider's helper ops and flags internally to prevent redundant code. Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Diffstat (limited to 'drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c')
-rw-r--r--drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c169
1 files changed, 169 insertions, 0 deletions
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
new file mode 100644
index 000000000000..513f4234adc1
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+#define PHY_14NM_CKLN_IDX 4
+
+static void dsi_14nm_dphy_set_timing(struct msm_dsi_phy *phy,
+ struct msm_dsi_dphy_timing *timing,
+ int lane_idx)
+{
+ void __iomem *base = phy->lane_base;
+ bool clk_ln = (lane_idx == PHY_14NM_CKLN_IDX);
+ u32 zero = clk_ln ? timing->clk_zero : timing->hs_zero;
+ u32 prepare = clk_ln ? timing->clk_prepare : timing->hs_prepare;
+ u32 trail = clk_ln ? timing->clk_trail : timing->hs_trail;
+ u32 rqst = clk_ln ? timing->hs_rqst_ckln : timing->hs_rqst;
+ u32 prep_dly = clk_ln ? timing->hs_prep_dly_ckln : timing->hs_prep_dly;
+ u32 halfbyte_en = clk_ln ? timing->hs_halfbyte_en_ckln :
+ timing->hs_halfbyte_en;
+
+ dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_4(lane_idx),
+ DSI_14nm_PHY_LN_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+ dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_5(lane_idx),
+ DSI_14nm_PHY_LN_TIMING_CTRL_5_HS_ZERO(zero));
+ dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_6(lane_idx),
+ DSI_14nm_PHY_LN_TIMING_CTRL_6_HS_PREPARE(prepare));
+ dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_7(lane_idx),
+ DSI_14nm_PHY_LN_TIMING_CTRL_7_HS_TRAIL(trail));
+ dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_8(lane_idx),
+ DSI_14nm_PHY_LN_TIMING_CTRL_8_HS_RQST(rqst));
+ dsi_phy_write(base + REG_DSI_14nm_PHY_LN_CFG0(lane_idx),
+ DSI_14nm_PHY_LN_CFG0_PREPARE_DLY(prep_dly));
+ dsi_phy_write(base + REG_DSI_14nm_PHY_LN_CFG1(lane_idx),
+ halfbyte_en ? DSI_14nm_PHY_LN_CFG1_HALFBYTECLK_EN : 0);
+ dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_9(lane_idx),
+ DSI_14nm_PHY_LN_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+ DSI_14nm_PHY_LN_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+ dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_10(lane_idx),
+ DSI_14nm_PHY_LN_TIMING_CTRL_10_TA_GET(timing->ta_get));
+ dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_11(lane_idx),
+ DSI_14nm_PHY_LN_TIMING_CTRL_11_TRIG3_CMD(0xa0));
+}
+
+static int dsi_14nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+ struct msm_dsi_phy_clk_request *clk_req)
+{
+ struct msm_dsi_dphy_timing *timing = &phy->timing;
+ u32 data;
+ int i;
+ int ret;
+ void __iomem *base = phy->base;
+ void __iomem *lane_base = phy->lane_base;
+
+ if (msm_dsi_dphy_timing_calc_v2(timing, clk_req)) {
+ dev_err(&phy->pdev->dev,
+ "%s: D-PHY timing calculation failed\n", __func__);
+ return -EINVAL;
+ }
+
+ data = 0x1c;
+ if (phy->usecase != MSM_DSI_PHY_STANDALONE)
+ data |= DSI_14nm_PHY_CMN_LDO_CNTRL_VREG_CTRL(32);
+ dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data);
+
+ dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL, 0x1);
+
+ /* 4 data lanes + 1 clk lane configuration */
+ for (i = 0; i < 5; i++) {
+ dsi_phy_write(lane_base + REG_DSI_14nm_PHY_LN_VREG_CNTRL(i),
+ 0x1d);
+
+ dsi_phy_write(lane_base +
+ REG_DSI_14nm_PHY_LN_STRENGTH_CTRL_0(i), 0xff);
+ dsi_phy_write(lane_base +
+ REG_DSI_14nm_PHY_LN_STRENGTH_CTRL_1(i),
+ (i == PHY_14NM_CKLN_IDX) ? 0x00 : 0x06);
+
+ dsi_phy_write(lane_base + REG_DSI_14nm_PHY_LN_CFG3(i),
+ (i == PHY_14NM_CKLN_IDX) ? 0x8f : 0x0f);
+ dsi_phy_write(lane_base + REG_DSI_14nm_PHY_LN_CFG2(i), 0x10);
+ dsi_phy_write(lane_base + REG_DSI_14nm_PHY_LN_TEST_DATAPATH(i),
+ 0);
+ dsi_phy_write(lane_base + REG_DSI_14nm_PHY_LN_TEST_STR(i),
+ 0x88);
+
+ dsi_14nm_dphy_set_timing(phy, timing, i);
+ }
+
+ /* Make sure PLL is not start */
+ dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0x00);
+
+ wmb(); /* make sure everything is written before reset and enable */
+
+ /* reset digital block */
+ dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x80);
+ wmb(); /* ensure reset is asserted */
+ udelay(100);
+ dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x00);
+
+ msm_dsi_phy_set_src_pll(phy, src_pll_id,
+ REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL,
+ DSI_14nm_PHY_CMN_GLBL_TEST_CTRL_BITCLK_HS_SEL);
+
+ ret = msm_dsi_pll_set_usecase(phy->pll, phy->usecase);
+ if (ret) {
+ dev_err(&phy->pdev->dev, "%s: set pll usecase failed, %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ /* Remove power down from PLL and all lanes */
+ dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_CTRL_0, 0xff);
+
+ return 0;
+}
+
+static void dsi_14nm_phy_disable(struct msm_dsi_phy *phy)
+{
+ dsi_phy_write(phy->base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL, 0);
+ dsi_phy_write(phy->base + REG_DSI_14nm_PHY_CMN_CTRL_0, 0);
+
+ /* ensure that the phy is completely disabled */
+ wmb();
+}
+
+static int dsi_14nm_phy_init(struct msm_dsi_phy *phy)
+{
+ struct platform_device *pdev = phy->pdev;
+
+ phy->lane_base = msm_ioremap(pdev, "dsi_phy_lane",
+ "DSI_PHY_LANE");
+ if (IS_ERR(phy->lane_base)) {
+ dev_err(&pdev->dev, "%s: failed to map phy lane base\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs = {
+ .type = MSM_DSI_PHY_14NM,
+ .src_pll_truthtable = { {false, false}, {true, false} },
+ .reg_cfg = {
+ .num = 1,
+ .regs = {
+ {"vcca", 17000, 32},
+ },
+ },
+ .ops = {
+ .enable = dsi_14nm_phy_enable,
+ .disable = dsi_14nm_phy_disable,
+ .init = dsi_14nm_phy_init,
+ },
+ .io_start = { 0x994400, 0x996400 },
+ .num_dsi_phy = 2,
+};