summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorVille Syrjälä <ville.syrjala@linux.intel.com>2018-06-14 20:56:25 +0300
committerRodrigo Vivi <rodrigo.vivi@intel.com>2018-07-09 14:36:47 -0700
commit96a85cc517a9ee4ae5e8d7f5a36cba05023784eb (patch)
treebaeaca6ea93d33df91fc7c3c683faf6162d6c3f9
parent1e4b044d22517cae7047c99038abb444423243ca (diff)
drm/i915: Fix hotplug irq ack on i965/g4xdrm-intel-fixes-2018-07-10
Just like with PIPESTAT, the edge triggered IIR on i965/g4x also causes problems for hotplug interrupts. To make sure we don't get the IIR port interrupt bit stuck low with the ISR bit high we must force an edge in ISR. Unfortunately we can't borrow the PIPESTAT trick and toggle the enable bits in PORT_HOTPLUG_EN as that act itself generates hotplug interrupts. Instead we just have to loop until we've cleared PORT_HOTPLUG_STAT, or we just give up and WARN. v2: Don't frob with PORT_HOTPLUG_EN Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180614175625.1615-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 0ba7c51a6fd80a89236f6ceb52e63f8a7f62bfd3) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-rw-r--r--drivers/gpu/drm/i915/i915_irq.c32
1 files changed, 30 insertions, 2 deletions
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 4a02747ac658..c16cb025755e 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1998,10 +1998,38 @@ static void valleyview_pipestat_irq_handler(struct drm_i915_private *dev_priv,
static u32 i9xx_hpd_irq_ack(struct drm_i915_private *dev_priv)
{
- u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
+ u32 hotplug_status = 0, hotplug_status_mask;
+ int i;
+
+ if (IS_G4X(dev_priv) ||
+ IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+ hotplug_status_mask = HOTPLUG_INT_STATUS_G4X |
+ DP_AUX_CHANNEL_MASK_INT_STATUS_G4X;
+ else
+ hotplug_status_mask = HOTPLUG_INT_STATUS_I915;
- if (hotplug_status)
+ /*
+ * We absolutely have to clear all the pending interrupt
+ * bits in PORT_HOTPLUG_STAT. Otherwise the ISR port
+ * interrupt bit won't have an edge, and the i965/g4x
+ * edge triggered IIR will not notice that an interrupt
+ * is still pending. We can't use PORT_HOTPLUG_EN to
+ * guarantee the edge as the act of toggling the enable
+ * bits can itself generate a new hotplug interrupt :(
+ */
+ for (i = 0; i < 10; i++) {
+ u32 tmp = I915_READ(PORT_HOTPLUG_STAT) & hotplug_status_mask;
+
+ if (tmp == 0)
+ return hotplug_status;
+
+ hotplug_status |= tmp;
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
+ }
+
+ WARN_ONCE(1,
+ "PORT_HOTPLUG_STAT did not clear (0x%08x)\n",
+ I915_READ(PORT_HOTPLUG_STAT));
return hotplug_status;
}