summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2003-11-012003-11-01 Havoc Pennington <hp@redhat.com>Havoc Pennington2-2/+159
* doc/dbus-specification.xml: add state machine docs on the auth protocol; just a first draft, I'm sure it's wrong.
2003-10-222003-10-22 Havoc Pennington <hp@redhat.com>Havoc Pennington1-0/+4
* bus/bus.c (bus_context_check_security_policy): fix up assertion * bus/connection.c (bus_transaction_send_from_driver): set the destination to the connection's base service
2003-10-212003-10-20 Havoc Pennington <hp@redhat.com>Havoc Pennington2-69/+84
hmm, make check is currently not passing. * doc/dbus-specification.xml: add requirement that custom type names follow the same rules as interface names. * dbus/dbus-protocol.h: change some of the byte codes, to avoid duplication and allow 'c' to be 'custom'; dict is now 'm' for 'map' * doc/dbus-specification.xml: update type codes to match dbus-protocol.h, using the ASCII byte values. Rename type NAMED to CUSTOM. Add type OBJECT_PATH to the spec. 2003-10-17 Havoc Pennington <hp@redhat.com> * bus/driver.c (create_unique_client_name): use "." as separator in base service names instead of '-' * dbus/dbus-string.c (_dbus_string_get_byte): allow getting nul byte at the end of the string * dbus/dbus-internals.h (_DBUS_LIKELY, _DBUS_UNLIKELY): add optimization macros since string validation seems to be a slow point. * doc/dbus-specification.xml: restrict valid service/interface/member/error names. Add test suite code for the name validation. * dbus/dbus-string.c: limit service/interface/member/error names to [0-9][A-Z][a-z]_ * dbus/dbus-connection.c (dbus_connection_dispatch): add missing format arg to verbose spew * glib/dbus-gproxy.c (dbus_gproxy_call_no_reply): if not out of memory, return instead of g_error * test/test-service.c (path_message_func): support emitting a signal on request * dbus/dbus-bus.c (init_connections_unlocked): only fill in activation bus type if DBUS_BUS_ACTIVATION was set; default to assuming the activation bus was the session bus so that services started manually will still register. (init_connections_unlocked): fix so that in OOM situation we get the same semantics when retrying the function * test/test-service.c (main): change to use path registration, to test those codepaths; register with DBUS_BUS_ACTIVATION rather than DBUS_BUS_SESSION
2003-10-162003-10-16 Havoc Pennington <hp@redhat.com>Havoc Pennington1-0/+7
* bus/connection.c (bus_pending_reply_expired): either cancel or execute, not both (bus_connections_check_reply): use unlink, not remove_link, as we don't want to free the link; fixes double free mess * dbus/dbus-pending-call.c (dbus_pending_call_block): fix in case where no reply was received * dbus/dbus-connection.c (_dbus_pending_call_complete_and_unlock): fix a refcount leak * bus/signals.c (match_rule_matches): add special cases for the bus driver, so you can match on sender/destination for it. * dbus/dbus-sysdeps.c (_dbus_abort): print backtrace if DBUS_PRINT_BACKTRACE is set * dbus/dbus-internals.c: add pid to assertion failure messages * dbus/dbus-connection.c: add message type code to the debug spew * glib/dbus-gproxy.c (gproxy_get_match_rule): match rules want sender=foo not service=foo * dbus/dbus-bus.c (dbus_bus_get): if the activation bus is the session bus but DBUS_SESSION_BUS_ADDRESS isn't set, use DBUS_ACTIVATION_ADDRESS instead * bus/activation.c: set DBUS_SESSION_BUS_ADDRESS, DBUS_SYSTEM_BUS_ADDRESS if appropriate * bus/bus.c (bus_context_new): handle OOM copying bus type into context struct * dbus/dbus-message.c (dbus_message_iter_get_object_path): new function (dbus_message_iter_get_object_path_array): new function (half finished, disabled for the moment) * glib/dbus-gproxy.c (dbus_gproxy_end_call): properly handle DBUS_MESSAGE_TYPE_ERROR * tools/dbus-launch.c (babysit): support DBUS_DEBUG_OUTPUT to avoid redirecting stderr to /dev/null (babysit): close stdin if not doing the "exit_with_session" thing * dbus/dbus-sysdeps.c (_dbus_become_daemon): delete some leftover debug code; change DBUS_DEBUG_OUTPUT to only enable stderr, not stdout/stdin, so things don't get confused * bus/system.conf.in: fix to allow replies, I modified .conf instead of .conf.in again.
2003-10-142003-10-14 Havoc Pennington <hp@redhat.com>Havoc Pennington2-8/+5
* bus/bus.c (bus_context_check_security_policy): revamp this to work more sanely with new policy-based requested reply setup * bus/connection.c (bus_transaction_send_from_driver): set bus driver messages as no reply * bus/policy.c (bus_client_policy_check_can_receive): handle a requested_reply attribute on allow/deny rules * bus/system.conf: add <allow requested_reply="true"/> * bus/driver.c (bus_driver_handle_message): fix check for replies sent to the bus driver, which was backward. How did this ever work at all though? I think I'm missing something. * dbus/dbus-message.c (decode_header_data): require error and method return messages to have a reply serial field to be valid (_dbus_message_loader_queue_messages): break up this function; validate that reply serial and plain serial are nonzero; clean up the OOM/error handling. (get_uint_field): don't return -1 from this (dbus_message_create_header): fix signed/unsigned bug * bus/connection.c (bus_connections_expect_reply): save serial of the incoming message, not reply serial
2003-10-14 - the pending reply tracking isn't quite right. It currently simplyHavoc Pennington1-1/+8
blocks any reply if one wasn't pending. Instead, it needs to allow any reply if one was pending, and block otherwise. Suggest changing the check_reply() call to just get a boolean was_pending_reply value, pass that in to the policy engine, and allow <allow>/<deny> elements to match based on whether it was a pending reply.
2003-10-142003-10-14 Havoc Pennington <hp@redhat.com>Havoc Pennington1-4/+11
* bus/connection.c: implement pending reply tracking using BusExpireList * bus/bus.c (bus_context_check_security_policy): verify that a reply is pending in order to allow a reply to be sent. Deny messages of unknown type. * bus/dbus-daemon-1.1.in: update to mention new resource limits * bus/bus.c (bus_context_get_max_replies_per_connection): new (bus_context_get_reply_timeout): new
2003-10-122003-10-12 Havoc Pennington <hp@pobox.com>Havoc Pennington1-0/+4
Added test code that 1) starts an actual bus daemon and 2) uses DBusGProxy; fixed bugs that were revealed by the test. Lots more testing possible, but this is the basic framework. * glib/dbus-gproxy.c (dbus_gproxy_manager_unregister): remove empty proxy lists from the proxy list hash * dbus/dbus-message.c (dbus_message_iter_get_args_valist): add a couple of return_if_fail checks * dbus/dbus-pending-call.c (_dbus_pending_call_new): use dbus_new0 to allocate, so everything is cleared to NULL as it should be. * glib/dbus-gmain.c (dbus_connection_setup_with_g_main): pass source as data to dbus_connection_set_timeout_functions() as the timeout functions expected * test/glib/run-test.sh: add a little script to start up a message bus and run tests using it * tools/dbus-launch.1: updates * tools/dbus-launch.c (main): add --config-file option * tools/dbus-launch.c (main): remove confusing else if (runprog) that could never be reached. * dbus/dbus-message.c (dbus_message_new_method_return) (dbus_message_new_error, dbus_message_new_signal): set the no-reply-expected flag on all these. Redundant, but may as well be consistent.
2003-10-122003-10-11 Havoc Pennington <hp@pobox.com>Havoc Pennington1-0/+14
* test/decode-gcov.c (function_solve_graph): make broken block graph a nonfatal error since it seems to be broken. Need to debug this. * dbus/dbus-marshal.c (_dbus_type_is_valid): new function since we can't just check type > INVALID < LAST anymore * dbus/dbus-message.c (dbus_message_get_signature): new function (dbus_message_has_signature): new function (struct DBusMessage): add signature field (right now it isn't sent over the wire, just generated on the fly) (dbus_message_copy): copy the signature, and init strings to proper length to avoid some reallocs (dbus_message_iter_init_array_iterator): return void, since it can't fail (dbus_message_iter_init_dict_iterator): return void since it can't fail (_dbus_message_loader_queue_messages): add silly temporary hack to fill in message->signature on load * dbus/dbus-protocol.h: change DBUS_TYPE_* values to be ASCII characters, so they are relatively human-readable.
2003-10-112003-10-11 Havoc Pennington <hp@pobox.com>Havoc Pennington1-3/+3
* dbus/dbus-message.c (_dbus_message_test): add more test coverage, but #if 0 for now since they uncover a bug not fixed yet; I think in re_align_field_recurse() (re_align_field_recurse): add FIXME about broken assertion * dbus/dbus-sysdeps.c (_dbus_sysdeps_test): add more test coverage * bus/connection.c: share a couple code bits with expirelist.c * bus/expirelist.h, bus/expirelist.c: implement a generic expire-items-after-N-seconds facility, was going to share between expiring connections and replies, decided not to use for expiring connections for now. * bus/connection.c: add tracking of expected replies * COPYING: include AFL 2.0 (still need to change all the file headers)
2003-10-02tweakHavoc Pennington1-10/+11
2003-10-02tutorial hackingHavoc Pennington1-2/+19
2003-10-022003-10-02 Havoc Pennington <hp@redhat.com>Havoc Pennington1-8/+407
* doc/dbus-tutorial.xml: write some stuff
2003-09-302003-09-29 Havoc Pennington <hp@pobox.com>Havoc Pennington4-74/+124
* configure.in: split checks for Doxygen from XML docs, check for xmlto * doc/Makefile.am: XML-ify all the docs, and add a blank dbus-tutorial.xml
2003-09-302003-09-29 Havoc Pennington <hp@pobox.com>Havoc Pennington2-227/+427
* Merge dbus-object-names branch. To see the entire patch do cvs diff -r DBUS_OBJECT_NAMES_BRANCHPOINT -r dbus-object-names, it's huuuuge though. To revert, I tagged DBUS_BEFORE_OBJECT_NAMES_MERGE. 2003-09-28 Havoc Pennington <hp@pobox.com> * HACKING: update to reflect new server 2003-09-26 Seth Nickell <seth@gnome.org> * python/dbus.py: * python/examples/example-signals.py: Start implementing some notions of signals. The API is really terrible, but they sort of work (with the exception of being able to filter by service, and to transmit signals *as* a particular service). Need to figure out how to make messages come from the service we registered :-( * python/dbus_bindings.pyx.in: Removed duplicate message_handler callbacks. 2003-09-25 Havoc Pennington <hp@redhat.com> * bus/session.conf.in: fix my mess 2003-09-25 Havoc Pennington <hp@pobox.com> * bus/session.conf.in: fix security policy, reported by Seth Nickell 2003-09-25 Seth Nickell <seth@gnome.org> * python/examples/example-service.py: Johan notices complete wrong code in example-service, but completely wrong in a way that works exactly the same (!). Johan is confused, how could this possibly work? Example code fails to serve purpose of making things clear. Seth fixes. 2003-09-25 Mark McLoughlin <mark@skynet.ie> * doc/dbus-specification.sgml: don't require header fields to be 4-byte aligned and specify that fields should be distinguished from padding by the fact that zero is not a valid field name. * doc/TODO: remove re-alignment item and add item to doc the OBJECT_PATH type. * dbus/dbus-message.c: (HeaderField): rename the original member to value_offset and introduce a name_offset member to keep track of where the field actually begins. (adjust_field_offsets): remove. (append_int_field), (append_uint_field), (append_string_field): don't align the start of the header field to a 4-byte boundary. (get_next_field): impl finding the next marhsalled field after a given field. (re_align_field_recurse): impl re-aligning a number of already marshalled fields. (delete_field): impl deleting a field of any type and re-aligning any following fields. (delete_int_or_uint_field), (delete_string_field): remove. (set_int_field), (set_uint_field): no need to re-check that we have the correct type for the field. (set_string_field): ditto and impl re-aligning any following fields. (decode_header_data): update to take into account that the fields aren't 4-byte aligned any more and the new way to distinguish padding from header fields. Also, don't exit when there is too much header padding. (process_test_subdir): print the directory. (_dbus_message_test): add test to make sure a following field is re-aligned correctly after field deletion. * dbus/dbus-string.[ch]: (_dbus_string_insert_bytes): rename from insert_byte and allow the insert of multiple bytes. (_dbus_string_test): test inserting multiple bytes. * dbus/dbus-marshal.c: (_dbus_marshal_set_string): add warning note to docs about having to re-align any marshalled values following the string. * dbus/dbus-message-builder.c: (append_string_field), (_dbus_message_data_load): don't align the header field. * dbus/dbus-auth.c: (process_test_subdir): print the directory. * test/break-loader.c: (randomly_add_one_byte): upd. for insert_byte change. * test/data/invalid-messages/bad-header-field-alignment.message: new test case. * test/data/valid-messages/unknown-header-field.message: shove a dict in the unknown field. 2003-09-25 Seth Nickell <seth@gnome.org> * python/dbus.py: * python/dbus_bindings.pyx.in: Handle return values. * python/examples/example-client.py: * python/examples/example-service.py: Pass back return values from the service to the client. 2003-09-24 Seth Nickell <seth@gnome.org> * python/dbus.py: Connect Object methods (when you are sharing an object) up... pass in a list of methods to be shared. Sharing all the methods just worked out too weird. You can now create nice Services over the DBus in Python. :-) * python/dbus_bindings.pyx.in: Keep references to user_data tuples passed into C functions so Python doesn't garbage collect on us. Implement MethodReturn and Error subclasses of Message for creating DBusMessage's of those types. * python/examples/example-client.py: * python/examples/example-service.py: Simple example code showing both how create DBus services and objects, and how to use them. 2003-09-23 Havoc Pennington <hp@pobox.com> * glib/dbus-gproxy.c (dbus_gproxy_manager_filter): implement 2003-09-23 Havoc Pennington <hp@redhat.com> * glib/dbus-gproxy.c (dbus_gproxy_connect_signal): implement (dbus_gproxy_disconnect_signal): implement (dbus_gproxy_manager_remove_signal_match): implement (dbus_gproxy_manager_add_signal_match): implement (dbus_gproxy_oneway_call): implement 2003-09-23 Havoc Pennington <hp@pobox.com> * glib/dbus-gproxy.c (struct DBusGProxy): convert to a GObject subclass. This means dropping the transparent thread safety of the proxy; you now need a separate proxy per-thread, or your own locking on the proxy. Probably right anyway. (dbus_gproxy_ref, dbus_gproxy_unref): nuke, just use g_object_ref 2003-09-22 Havoc Pennington <hp@redhat.com> * glib/dbus-gproxy.c (dbus_gproxy_manager_get): implement 2003-09-21 Seth Nickell <seth@gnome.org> First checkin of the Python bindings. * python/.cvsignore: * python/Makefile.am: * python/dbus_bindings.pyx.in: * python/dbus_h_wrapper.h: Pieces for Pyrex to operate on, building a dbus_bindings.so python module for low-level access to the DBus APIs. * python/dbus.py: High-level Python module for accessing DBus objects. * configure.in: * Makefile.am: Build stuff for the python bindings. * acinclude.m4: Extra macro needed for finding the Python C header files. 2003-09-21 Havoc Pennington <hp@pobox.com> * glib/dbus-gproxy.c (dbus_gproxy_manager_new): start implementing the proxy manager, didn't get very far. * dbus/dbus-bus.c (dbus_bus_add_match): new (dbus_bus_remove_match): new * glib/dbus-gproxy.c (dbus_gproxy_new_for_service): add a path_name argument; adjust the other not-yet-implemented gproxy constructors to be what I think they should be. 2003-09-21 Havoc Pennington <hp@pobox.com> * dbus/dbus-bus.c (dbus_bus_get): set exit_on_disconnect to TRUE by default for message bus connections. * dbus/dbus-connection.c (dbus_connection_dispatch): exit if exit_on_disconnect flag is set and we process the disconnected signal. (dbus_connection_set_exit_on_disconnect): new function 2003-09-21 Havoc Pennington <hp@pobox.com> Get matching rules mostly working in the bus; only actually parsing the rule text remains. However, the client side of "signal connections" hasn't been started, this patch is only the bus side. * dbus/dispatch.c: fix for the matching rules changes * bus/driver.c (bus_driver_handle_remove_match) (bus_driver_handle_add_match): send an ack reply from these method calls * glib/dbus-gproxy.c (dbus_gproxy_begin_call): fix order of arguments, reported by Seth Nickell * bus/config-parser.c (append_rule_from_element): support eavesdrop=true|false attribute on policies so match rules can be prevented from snooping on the system bus. * bus/dbus-daemon-1.1.in: consistently use terminology "sender" and "destination" in attribute names; fix some docs bugs; add eavesdrop=true|false attribute * bus/driver.c (bus_driver_handle_add_match) (bus_driver_handle_remove_match): handle AddMatch, RemoveMatch messages * dbus/dbus-protocol.h (DBUS_SERVICE_ORG_FREEDESKTOP_BROADCAST): get rid of broadcast service concept, signals are just always broadcast * bus/signals.c, bus/dispatch.c, bus/connection.c, bus/bus.c: mostly implement matching rules stuff (currently only exposed as signal connections) 2003-09-21 Mark McLoughlin <mark@skynet.ie> * doc/dbus-specification.sgml: Change the header field name to be an enum and update the rest of the spec to reference the fields using the conventinal name. * dbus/dbus-protocol.h: update to reflect the spec. * doc/TODO: add item to remove the 4 byte alignment requirement. * dbus/dbus-message.c: Remove the code to generalise the header/body length and serial number header fields as named header fields so we can reference field names using the protocol values. (append_int_field), (append_uint_field), (append_string_field): Append the field name as a byte rather than four chars. (delete_int_or_uint_field), (delete_string_field): reflect the fact that the field name and typecode now occupy 4 bytes instead of 8. (decode_string_field), (decode_header_data): update to reflect protocol changes and move the field specific encoding from decode_string_field() back into decode_header_data(). * dbus/dbus-internals.[ch]: (_dbus_header_field_to_string): Add utility to aid debugging. * dbus/dbus-message-builder.c: (append_string_field), (_dbus_message_data_load): Update to reflect protocol changes; Change the FIELD_NAME directive to HEADER_FIELD and allow it to take the field's conventional name rather than the actual value. * test/data/*/*.message: Update to use HEADER_FIELD instead of FIELD_NAME; Always align the header on an 8 byte boundary *before* updating the header length. 2003-09-15 Havoc Pennington <hp@pobox.com> * dbus/dbus-pending-call.c: add the get/set object data boilerplate as for DBusConnection, etc. Use generic object data for the notify callback. * glib/dbus-gparser.c (parse_node): parse child nodes * tools/dbus-viewer.c: more hacking on the dbus-viewer * glib/dbus-gutils.c (_dbus_gutils_split_path): add a file to contain functions shared between the convenience lib and the installed lib * glib/Makefile.am (libdbus_glib_1_la_LDFLAGS): add -export-symbols-regex to the GLib library * dbus/dbus-object-tree.c (_dbus_object_tree_dispatch_and_unlock): fix the locking in here, and add a default handler for Introspect() that just returns sub-nodes. 2003-09-14 Havoc Pennington <hp@pobox.com> * glib/dbus-gthread.c (dbus_g_thread_init): rename to make g_foo rather than gfoo consistent * glib/dbus-gproxy.h: delete for now, move contents to dbus-glib.h, because the include files don't work right since we aren't in the dbus/ subdir. * glib/dbus-gproxy.c (dbus_gproxy_send): finish implementing (dbus_gproxy_end_call): finish (dbus_gproxy_begin_call): finish * glib/dbus-gmain.c (dbus_set_g_error): new * glib/dbus-gobject.c (handle_introspect): include information about child nodes in the introspection * dbus/dbus-connection.c (dbus_connection_list_registered): new function to help in implementation of introspection * dbus/dbus-object-tree.c (_dbus_object_tree_list_registered_and_unlock): new function 2003-09-12 Havoc Pennington <hp@pobox.com> * glib/dbus-gidl.h: add common base class for all the foo_info types * tools/dbus-viewer.c: add GTK-based introspection UI thingy similar to kdcop * test/Makefile.am: try test srcdir -ef . in addition to test srcdir = ., one of them should work (yeah lame) * glib/Makefile.am: build the "idl" parser stuff as a convenience library * glib/dbus-gparser.h: make description_load routines return NodeInfo* not Parser* * Makefile.am (SUBDIRS): build test dir after all library dirs * configure.in: add GTK+ detection 2003-09-07 Havoc Pennington <hp@pobox.com> * Make Doxygen contented. 2003-09-07 Havoc Pennington <hp@pobox.com> * doc/dbus-specification.sgml: more updates 2003-09-06 Havoc Pennington <hp@pobox.com> * doc/dbus-specification.sgml: partial updates * bus/dbus-daemon-1.1.in: fix the config file docs for the zillionth time; hopefully I edited the right file this time. * bus/config-parser.c (append_rule_from_element): support send_type, send_path, receive_type, receive_path * bus/policy.c: add message type and path to the list of things that can be "firewalled" 2003-09-06 Havoc Pennington <hp@pobox.com> * dbus/dbus-connection.c (dbus_connection_register_fallback): add this (dbus_connection_register_object_path): make this not handle messages to paths below the given path 2003-09-03 Havoc Pennington <hp@pobox.com> * test/glib/Makefile.am: add this with random glib-linked test programs * glib/Makefile.am: remove the random test programs from here, leave only the unit tests * glib/dbus-gobject.c (_dbus_gobject_test): add test for uscore/javacaps conversion, and fix (get_object_property, set_object_property): change to .NET convention for mapping props to methods, set_FooBar/get_FooBar, since one language has such a convention we may as well copy it. Plus real methods in either getFooBar or get_foo_bar style won't collide with this convention. 2003-09-01 Havoc Pennington <hp@pobox.com> * glib/dbus-gparser.c: implement * glib/dbus-gobject.c: start implementing skeletons support * configure.in: when disabling checks/assert, also define G_DISABLE_ASSERT and G_DISABLE_CHECKS 2003-09-01 Havoc Pennington <hp@pobox.com> * glib/Makefile.am: rearrange a bunch of files and get "make check" framework set up 2003-08-31 Havoc Pennington <hp@pobox.com> * fix build with --disable-tests 2003-08-30 Havoc Pennington <hp@pobox.com> * dbus/dbus-connection.c: purge DBusMessageHandler * dbus/dbus-message-handler.c: remove DBusMessageHandler, just use callbacks everywhere 2003-08-30 Havoc Pennington <hp@pobox.com> * test/data/valid-config-files/system.d/test.conf: change to root for the user so warnings don't get printed * dbus/dbus-message.c: add dbus_message_get_path, dbus_message_set_path * dbus/dbus-object-tree.c (do_test_dispatch): add test of dispatching to a path * dbus/dbus-string.c (_dbus_string_validate_path): add * dbus/dbus-marshal.c (_dbus_demarshal_object_path): implement (_dbus_marshal_object_path): implement * dbus/dbus-protocol.h (DBUS_HEADER_FIELD_PATH): new header field to contain the path to the target object (DBUS_HEADER_FIELD_SENDER_SERVICE): rename DBUS_HEADER_FIELD_SENDER to explicitly say it's the sender service 2003-08-30 Havoc Pennington <hp@pobox.com> * dbus/dbus-object-tree.c: write tests and fix the discovered bugs 2003-08-29 Havoc Pennington <hp@pobox.com> * dbus/dbus-object-tree.c: modify to allow overlapping paths to be registered (struct DBusObjectSubtree): shrink this a lot, since we may have a lot of them (_dbus_object_tree_free_all_unlocked): implement (_dbus_object_tree_dispatch_and_unlock): implement 2003-08-29 Havoc Pennington <hp@pobox.com> * dbus/dbus-internals.h: fix _DBUS_N_GLOBAL_LOCKS 2003-08-28 Havoc Pennington <hp@pobox.com> purge DBusObjectID * dbus/dbus-connection.c: port to no ObjectID, create a DBusObjectTree, rename ObjectTree to ObjectPath in public API * dbus/dbus-connection.h (struct DBusObjectTreeVTable): delete everything except UnregisterFunction and MessageFunction * dbus/dbus-marshal.c: port away from DBusObjectID, add DBUS_TYPE_OBJECT_PATH * dbus/dbus-object-registry.[hc], dbus/dbus-object.[hc], dbus/dbus-objectid.[hc]: remove these, we are moving to path-based object IDs 2003-08-25 Havoc Pennington <hp@pobox.com> Just noticed that dbus_message_test is hosed, I wonder when I broke that. I thought make check was passing earlier... * dbus/dbus-object-tree.c: add new "object tree" to match DCOP container tree, will replace most of dbus-object-registry * dbus/dbus-string.c (_dbus_string_append_printf_valist): fix C99 screwup 2003-08-19 Havoc Pennington <hp@pobox.com> * dbus/dbus-message.c (decode_string_field): support FIELD_SENDER (dbus_message_is_error): fix this function * bus/dbus-daemon-1.1: clarify logic on when <deny>/<allow> rules match * bus/policy.c (bus_client_policy_check_can_receive): fix code to reflect clarified man page (bus_client_policy_check_can_send): ditto * bus/session.conf.in: fixup * bus/system.conf.in: fixup 2003-08-18 Havoc Pennington <hp@redhat.com> * dbus/dbus-hash.c (_dbus_hash_table_insert_two_strings): fix * dbus/dbus-message.c (_dbus_message_loader_queue_messages): fix dumb bug created earlier (wrong order of args to decode_header_data()) * tools/dbus-send.c: port * tools/dbus-print-message.c (print_message): port * test/data/*messages: port all messages over * dbus/dbus-message-builder.c: support including message type * bus/driver.c: port over * bus/dispatch.c: port over to new stuff * dbus/dbus-connection.c (_dbus_connection_new_for_transport): rename disconnect signal to "Disconnected" 2003-08-17 Havoc Pennington <hp@pobox.com> This doesn't compile yet, but syncing up so I can hack on it from work. What are branches for if not broken code? ;-) * dbus/dbus-protocol.h: remove DBUS_HEADER_FIELD_NAME, add DBUS_HEADER_FIELD_INTERFACE, DBUS_HEADER_FIELD_MEMBER, DBUS_HEADER_FIELD_ERROR_NAME * dbus/dbus-hash.c: Introduce DBUS_HASH_TWO_STRINGS as hack to use for the interface+member pairs (string_hash): change to use g_str_hash algorithm (find_direct_function, find_string_function): refactor these to share most code. * dbus/dbus-message.c: port all of this over to support interface/member fields instead of name field * dbus/dbus-object-registry.c: port over * dbus/dbus-string.c (_dbus_string_validate_interface): rename from _dbus_string_validate_name * bus/dbus-daemon-1.1: change file format for the <deny>/<allow> stuff to match new message naming scheme * bus/policy.c: port over * bus/config-parser.c: parse new format 2003-08-16 Havoc Pennington <hp@pobox.com> * dbus/dbus-object-registry.c (add_and_remove_objects): remove broken assertion * glib/dbus-gproxy.c: some hacking 2003-08-15 Havoc Pennington <hp@redhat.com> * dbus/dbus-pending-call.c (dbus_pending_call_block): implement * dbus/dbus-connection.c (dbus_connection_send_with_reply_and_block): factor out internals; change to convert any error replies to DBusError instead of returning them as a message 2003-08-15 Havoc Pennington <hp@pobox.com> * dbus/dbus-connection.c, dbus/dbus-pending-call.c: Finish the pending call stuff 2003-08-14 Havoc Pennington <hp@redhat.com> * dbus/dbus-pending-call.c: start on new object that will replace DBusMessageHandler and ReplyHandlerData for tracking outstanding replies * dbus/dbus-gproxy.c: start on proxy object used to communicate with remote interfaces * dbus/dbus-gidl.c: do the boring boilerplate in here 2003-08-12 Havoc Pennington <hp@pobox.com> * bus/dispatch.c (bus_dispatch): make this return proper DBusHandlerResult to avoid DBUS_ERROR_UNKNOWN_METHOD * dbus/dbus-errors.c (dbus_set_error): use _dbus_string_append_printf_valist * dbus/dbus-string.c (_dbus_string_append_printf_valist) (_dbus_string_append_printf): new * dbus/dbus-errors.h (DBUS_ERROR_UNKNOWN_MESSAGE): change to UNKNOWN_METHOD * dbus/dbus-connection.c (dbus_connection_dispatch): handle DBUS_HANDLER_RESULT_NEED_MEMORY; send default error reply if a message is unhandled. 2003-08-11 Havoc Pennington <hp@pobox.com> * bus/test.c (client_disconnect_handler): change to return HANDLED (would have been REMOVE_MESSAGE) * dbus/dbus-object.h (enum DBusHandlerResult): rename to HANDLED/NOT_YET_HANDLED instead of REMOVE_MESSAGE/ALLOW_MORE_HANDLERS to make it clearer how it should be used. 2003-08-10 Havoc Pennington <hp@pobox.com> * tools/dbus-send.c (main): add --type argument, for now supporting only method_call and signal types. * tools/dbus-print-message.c: print message type * dbus/dbus-connection.c (_dbus_connection_new_for_transport): init connection->objects * doc/dbus-specification.sgml: fix sgml * bus/*.c: port over to object-instance API changes * test/test-service.c: ditto * dbus/dbus-message.c (dbus_message_create_header): allow #NULL name, we will have to fix up the rest of the code to also handle this (dbus_message_new): generic message-creation call (set_string_field): allow appending name field 2003-08-06 Havoc Pennington <hp@pobox.com> * dbus/dbus-object-registry.c: implement signal connection and dispatch * dbus/dbus-connection.c (_dbus_connection_unref_unlocked): new * dbus/dbus-internals.c (_dbus_memdup): new function 2003-08-02 Havoc Pennington <hp@pobox.com> * dbus/dbus-message.c (dbus_message_get_no_reply) (dbus_message_set_no_reply): add these and remove set_is_error/get_is_error * dbus/dbus-protocol.h, doc/dbus-specification.sgml: remove the ERROR flag, since there's now an ERROR type 2003-08-01 Havoc Pennington <hp@pobox.com> * dbus/dbus-object-registry.c (_dbus_object_registry_handle_and_unlock): implement * dbus/dbus-message.c (dbus_message_get_type): new function * doc/dbus-specification.sgml: add "type" byte to messages 2003-08-01 Havoc Pennington <hp@pobox.com> * dbus/dbus-protocol.h (DBUS_MESSAGE_TYPE_*): introduce a message type enum to distinguish kinds of message (DBUS_HEADER_FLAG_NO_REPLY_EXPECTED): flag for a message that need not be replied to 2003-08-01 Havoc Pennington <hp@pobox.com> * dbus/dbus-marshal.c: adapt to DBusObjectID changes (unpack_8_octets): fix no-64-bit-int bug * dbus/dbus-object-registry.c (validate_id): validate the connection ID bits, not just the instance ID. * dbus/dbus-connection.c (_dbus_connection_init_id): initialize the connection-global 33 bits of the object ID * dbus/dbus-object-registry.c (info_from_entry): fill in object ID in the new way * dbus/dbus-objectid.h: rather than high/low bits, specifically define server/client/instance bits. 2003-07-30 Havoc Pennington <hp@pobox.com> * dbus/dbus-connection.c (dbus_connection_register_object): fix build 2003-07-13 Havoc Pennington <hp@pobox.com> * dbus/dbus-object.h (struct DBusObjectVTable): add padding fields to DBusObjectVTable and DBusObjectInfo 2003-07-12 Havoc Pennington <hp@pobox.com> * dbus/dbus-object-registry.c: implement unit test, fix bugs discovered in process * dbus/dbus-connection.c: remove handler_table and register_handler(), add DBusObjectRegistry usage * dbus/dbus-objectid.c (dbus_object_id_is_null) (dbus_object_id_set_null): new functions 2003-07-08 Havoc Pennington <hp@pobox.com> * dbus/dbus-object.c: implement some of this * dbus/dbus-object-registry.c (_dbus_object_registry_add_and_unlock): fill in the object_id out param (_dbus_object_registry_new): handle OOM 2003-07-08 Havoc Pennington <hp@pobox.com> * dbus/dbus-object.h: sketch out an API for registering objects with a connection, that allows us to use as little as 24 bytes per object and lets application code represent an object in any conceivable way. * dbus/dbus-object-registry.c: implement the hard bits of the DBusConnection aspect of object API. Not yet wired up. 2003-07-06 Havoc Pennington <hp@pobox.com> * dbus/dbus-marshal.c (_dbus_marshal_set_object_id): new function (_dbus_marshal_object_id): new (_dbus_demarshal_object_id): new (_dbus_marshal_get_arg_end_pos): support object ID type, and consolidate identical switch cases. Don't conditionalize handling of DBUS_TYPE_UINT64, need to handle the type always. (_dbus_marshal_validate_arg): consolidate identical cases, and handle DBUS_TYPE_OBJECT_ID * dbus/dbus-objectid.c: new file with DBusObjectID data type. * dbus/dbus-protocol.h: add DBUS_TYPE_OBJECT_ID 2003-09-28 Havoc Pennington <hp@pobox.com> * real 0.13 release 2003-09-28 Havoc Pennington <hp@pobox.com> * doc/Makefile.am (dbus-specification.html): testing a funky hack to work with Debian db2html 2003-09-28 Havoc Pennington <hp@pobox.com> * configure.in: 0.13 * doc/Makefile.am (dbus-test-plan.html): accept nonexistence of stylesheet-images for benefit of Debian Change back to using filesystem-linked sockets for the system bus, so only root can create the default system bus address. * bus/system.conf.in: change to use DBUS_SYSTEM_BUS_DEFAULT_ADDRESS * dbus/Makefile.am (INCLUDES): remove DBUS_SYSTEM_BUS_PATH define from here. * configure.in: define DBUS_SYSTEM_BUS_DEFAULT_ADDRESS here, and AC_DEFINE DBUS_SYSTEM_PATH 2003-08-09 Anders Carlsson <andersca@codefactory.se> * doc/TODO: * doc/busconfig.dtd: Add busconfig DTD. 2003-08-09 Anders Carlsson <andersca@codefactory.se> * doc/dbus-specification.sgml: Add activation reply values. 2003-08-05 Havoc Pennington <hp@redhat.com> * configure.in: 0.12 2003-08-05 Anders Carlsson <andersca@codefactory.se> * glib/dbus-gmain.c: (watch_fd_new), (watch_fd_ref), (watch_fd_unref), (dbus_gsource_check), (dbus_gsource_dispatch), (add_watch), (remove_watch), (create_source): Refcount fds, fixes some reentrancy issues. 2003-07-30 Havoc Pennington <hp@redhat.com> * dbus/dbus-bus.c (init_connections_unlocked): fix default system bus address to be abstract if we have abstract sockets * NEWS: update 2003-07-28 Havoc Pennington <hp@redhat.com> * bus/messagebus.in: fix to avoid processname/servicename confusion, from Michael Kearey https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=100965 2003-07-23 Havoc Pennington <hp@pobox.com> * dbus/dbus-message.c (dbus_message_iter_get_named): fix from Andy Hanton to remove broken "+1" 2003-07-16 Havoc Pennington <hp@pobox.com> * tools/dbus-launch.c (babysit): close stdout/stderr in the babysitter process, as suggested by Thomas Leonard, so an "eval `dbus-launch --exit-with-session`" will actually return 2003-07-16 Havoc Pennington <hp@pobox.com> * configure.in: print out EXPANDED_* variables in the summary at the end; clean up the code that computes EXPANDED_ variables and get the ones using exec_prefix right. Should make things work when you build without --prefix
2003-09-29enhance debian hacksHavoc Pennington1-0/+2
2003-09-292003-09-28 Havoc Pennington <hp@pobox.com>Havoc Pennington1-2/+7
* doc/Makefile.am (dbus-specification.html): testing a funky hack to work with Debian db2html
2003-09-292003-09-28 Havoc Pennington <hp@pobox.com>Havoc Pennington1-6/+6
* configure.in: 0.13 * doc/Makefile.am (dbus-test-plan.html): accept nonexistence of stylesheet-images for benefit of Debian Change back to using filesystem-linked sockets for the system bus, so only root can create the default system bus address. * bus/system.conf.in: change to use DBUS_SYSTEM_BUS_DEFAULT_ADDRESS * dbus/Makefile.am (INCLUDES): remove DBUS_SYSTEM_BUS_PATH define from here. * configure.in: define DBUS_SYSTEM_BUS_DEFAULT_ADDRESS here, and AC_DEFINE DBUS_SYSTEM_PATH
2003-09-252003-09-25 Havoc Pennington <hp@pobox.com>Havoc Pennington1-0/+2
* bus/session.conf.in: fix security policy, reported by Seth Nickell
2003-09-252003-09-25 Mark McLoughlin <mark@skynet.ie>Mark McLoughlin2-12/+8
* doc/dbus-specification.sgml: don't require header fields to be 4-byte aligned and specify that fields should be distinguished from padding by the fact that zero is not a valid field name. * doc/TODO: remove re-alignment item and add item to doc the OBJECT_PATH type. * dbus/dbus-message.c: (HeaderField): rename the original member to value_offset and introduce a name_offset member to keep track of where the field actually begins. (adjust_field_offsets): remove. (append_int_field), (append_uint_field), (append_string_field): don't align the start of the header field to a 4-byte boundary. (get_next_field): impl finding the next marhsalled field after a given field. (re_align_field_recurse): impl re-aligning a number of already marshalled fields. (delete_field): impl deleting a field of any type and re-aligning any following fields. (delete_int_or_uint_field), (delete_string_field): remove. (set_int_field), (set_uint_field): no need to re-check that we have the correct type for the field. (set_string_field): ditto and impl re-aligning any following fields. (decode_header_data): update to take into account that the fields aren't 4-byte aligned any more and the new way to distinguish padding from header fields. Also, don't exit when there is too much header padding. (process_test_subdir): print the directory. (_dbus_message_test): add test to make sure a following field is re-aligned correctly after field deletion. * dbus/dbus-string.[ch]: (_dbus_string_insert_bytes): rename from insert_byte and allow the insert of multiple bytes. (_dbus_string_test): test inserting multiple bytes. * dbus/dbus-marshal.c: (_dbus_marshal_set_string): add warning note to docs about having to re-align any marshalled values following the string. * dbus/dbus-message-builder.c: (append_string_field), (_dbus_message_data_load): don't align the header field. * dbus/dbus-auth.c: (process_test_subdir): print the directory. * test/break-loader.c: (randomly_add_one_byte): upd. for insert_byte change. * test/data/invalid-messages/bad-header-field-alignment.message: new test case. * test/data/valid-messages/unknown-header-field.message: shove a dict in the unknown field.
2003-09-222003-09-21 Havoc Pennington <hp@pobox.com>Havoc Pennington1-0/+3
* glib/dbus-gproxy.c (dbus_gproxy_manager_new): start implementing the proxy manager, didn't get very far. * dbus/dbus-bus.c (dbus_bus_add_match): new (dbus_bus_remove_match): new * glib/dbus-gproxy.c (dbus_gproxy_new_for_service): add a path_name argument; adjust the other not-yet-implemented gproxy constructors to be what I think they should be.
2003-09-212003-09-21 Havoc Pennington <hp@pobox.com>Havoc Pennington1-3/+6
Get matching rules mostly working in the bus; only actually parsing the rule text remains. However, the client side of "signal connections" hasn't been started, this patch is only the bus side. * dbus/dispatch.c: fix for the matching rules changes * bus/driver.c (bus_driver_handle_remove_match) (bus_driver_handle_add_match): send an ack reply from these method calls * glib/dbus-gproxy.c (dbus_gproxy_begin_call): fix order of arguments, reported by Seth Nickell * bus/config-parser.c (append_rule_from_element): support eavesdrop=true|false attribute on policies so match rules can be prevented from snooping on the system bus. * bus/dbus-daemon-1.1.in: consistently use terminology "sender" and "destination" in attribute names; fix some docs bugs; add eavesdrop=true|false attribute * bus/driver.c (bus_driver_handle_add_match) (bus_driver_handle_remove_match): handle AddMatch, RemoveMatch messages * dbus/dbus-protocol.h (DBUS_SERVICE_ORG_FREEDESKTOP_BROADCAST): get rid of broadcast service concept, signals are just always broadcast * bus/signals.c, bus/dispatch.c, bus/connection.c, bus/bus.c: mostly implement matching rules stuff (currently only exposed as signal connections)
2003-09-212003-09-21 Mark McLoughlin <mark@skynet.ie>Mark McLoughlin2-36/+53
* doc/dbus-specification.sgml: Change the header field name to be an enum and update the rest of the spec to reference the fields using the conventinal name. * dbus/dbus-protocol.h: update to reflect the spec. * doc/TODO: add item to remove the 4 byte alignment requirement. * dbus/dbus-message.c: Remove the code to generalise the header/body length and serial number header fields as named header fields so we can reference field names using the protocol values. (append_int_field), (append_uint_field), (append_string_field): Append the field name as a byte rather than four chars. (delete_int_or_uint_field), (delete_string_field): reflect the fact that the field name and typecode now occupy 4 bytes instead of 8. (decode_string_field), (decode_header_data): update to reflect protocol changes and move the field specific encoding from decode_string_field() back into decode_header_data(). * dbus/dbus-internals.[ch]: (_dbus_header_field_to_string): Add utility to aid debugging. * dbus/dbus-message-builder.c: (append_string_field), (_dbus_message_data_load): Update to reflect protocol changes; Change the FIELD_NAME directive to HEADER_FIELD and allow it to take the field's conventional name rather than the actual value. * test/data/*/*.message: Update to use HEADER_FIELD instead of FIELD_NAME; Always align the header on an 8 byte boundary *before* updating the header length.
2003-09-172003-09-15 Havoc Pennington <hp@pobox.com>Havoc Pennington1-0/+4
* dbus/dbus-pending-call.c: add the get/set object data boilerplate as for DBusConnection, etc. Use generic object data for the notify callback. * glib/dbus-gparser.c (parse_node): parse child nodes * tools/dbus-viewer.c: more hacking on the dbus-viewer * glib/dbus-gutils.c (_dbus_gutils_split_path): add a file to contain functions shared between the convenience lib and the installed lib * glib/Makefile.am (libdbus_glib_1_la_LDFLAGS): add -export-symbols-regex to the GLib library * dbus/dbus-object-tree.c (_dbus_object_tree_dispatch_and_unlock): fix the locking in here, and add a default handler for Introspect() that just returns sub-nodes. 2003-09-14 Havoc Pennington <hp@pobox.com> * glib/dbus-gthread.c (dbus_g_thread_init): rename to make g_foo rather than gfoo consistent * glib/dbus-gproxy.h: delete for now, move contents to dbus-glib.h, because the include files don't work right since we aren't in the dbus/ subdir. * glib/dbus-gproxy.c (dbus_gproxy_send): finish implementing (dbus_gproxy_end_call): finish (dbus_gproxy_begin_call): finish * glib/dbus-gmain.c (dbus_set_g_error): new * glib/dbus-gobject.c (handle_introspect): include information about child nodes in the introspection * dbus/dbus-connection.c (dbus_connection_list_registered): new function to help in implementation of introspection * dbus/dbus-object-tree.c (_dbus_object_tree_list_registered_and_unlock): new function 2003-09-12 Havoc Pennington <hp@pobox.com> * glib/dbus-gidl.h: add common base class for all the foo_info types * tools/dbus-viewer.c: add GTK-based introspection UI thingy similar to kdcop * test/Makefile.am: try test srcdir -ef . in addition to test srcdir = ., one of them should work (yeah lame) * glib/Makefile.am: build the "idl" parser stuff as a convenience library * glib/dbus-gparser.h: make description_load routines return NodeInfo* not Parser* * Makefile.am (SUBDIRS): build test dir after all library dirs * configure.in: add GTK+ detection
2003-09-072003-09-07 Havoc Pennington <hp@pobox.com>Havoc Pennington1-180/+280
* doc/dbus-specification.sgml: more updates
2003-09-062003-09-06 Havoc Pennington <hp@pobox.com>Havoc Pennington1-18/+35
* doc/dbus-specification.sgml: partial updates * bus/dbus-daemon-1.1.in: fix the config file docs for the zillionth time; hopefully I edited the right file this time. * bus/config-parser.c (append_rule_from_element): support send_type, send_path, receive_type, receive_path * bus/policy.c: add message type and path to the list of things that can be "firewalled"
2003-09-012003-09-01 Havoc Pennington <hp@pobox.com>Havoc Pennington1-0/+3
* glib/Makefile.am: rearrange a bunch of files and get "make check" framework set up
2003-08-312003-08-31 Havoc Pennington <hp@pobox.com>Havoc Pennington1-0/+7
* fix build with --disable-tests
2003-08-312003-08-30 Havoc Pennington <hp@pobox.com>Havoc Pennington1-0/+3
* test/data/valid-config-files/system.d/test.conf: change to root for the user so warnings don't get printed * dbus/dbus-message.c: add dbus_message_get_path, dbus_message_set_path * dbus/dbus-object-tree.c (do_test_dispatch): add test of dispatching to a path * dbus/dbus-string.c (_dbus_string_validate_path): add * dbus/dbus-marshal.c (_dbus_demarshal_object_path): implement (_dbus_marshal_object_path): implement * dbus/dbus-protocol.h (DBUS_HEADER_FIELD_PATH): new header field to contain the path to the target object (DBUS_HEADER_FIELD_SENDER_SERVICE): rename DBUS_HEADER_FIELD_SENDER to explicitly say it's the sender service
2003-08-302003-08-29 Havoc Pennington <hp@pobox.com>Havoc Pennington1-0/+8
* dbus/dbus-internals.h: fix _DBUS_N_GLOBAL_LOCKS
2003-08-182003-08-18 Havoc Pennington <hp@redhat.com>Havoc Pennington1-3/+0
* dbus/dbus-hash.c (_dbus_hash_table_insert_two_strings): fix * dbus/dbus-message.c (_dbus_message_loader_queue_messages): fix dumb bug created earlier (wrong order of args to decode_header_data()) * tools/dbus-send.c: port * tools/dbus-print-message.c (print_message): port * test/data/*messages: port all messages over * dbus/dbus-message-builder.c: support including message type * bus/driver.c: port over * bus/dispatch.c: port over to new stuff * dbus/dbus-connection.c (_dbus_connection_new_for_transport): rename disconnect signal to "Disconnected"
2003-08-112003-08-10 Havoc Pennington <hp@pobox.com>Havoc Pennington1-1/+0
* tools/dbus-send.c (main): add --type argument, for now supporting only method_call and signal types. * tools/dbus-print-message.c: print message type * dbus/dbus-connection.c (_dbus_connection_new_for_transport): init connection->objects * doc/dbus-specification.sgml: fix sgml * bus/*.c: port over to object-instance API changes * test/test-service.c: ditto * dbus/dbus-message.c (dbus_message_create_header): allow #NULL name, we will have to fix up the rest of the code to also handle this (dbus_message_new): generic message-creation call (set_string_field): allow appending name field
2003-08-092003-08-09 Anders Carlsson <andersca@codefactory.se>Anders Carlsson2-2/+52
* doc/TODO: * doc/busconfig.dtd: Add busconfig DTD.
2003-08-092003-08-09 Anders Carlsson <andersca@codefactory.se>Anders Carlsson1-6/+28
* doc/dbus-specification.sgml: Add activation reply values.
2003-08-022003-08-02 Havoc Pennington <hp@pobox.com>Havoc Pennington1-5/+2
* dbus/dbus-message.c (dbus_message_get_no_reply) (dbus_message_set_no_reply): add these and remove set_is_error/get_is_error * dbus/dbus-protocol.h, doc/dbus-specification.sgml: remove the ERROR flag, since there's now an ERROR type
2003-08-022003-08-01 Havoc Pennington <hp@pobox.com>Havoc Pennington1-7/+51
* dbus/dbus-object-registry.c (_dbus_object_registry_handle_and_unlock): implement * dbus/dbus-message.c (dbus_message_get_type): new function * doc/dbus-specification.sgml: add "type" byte to messages
2003-07-012003-07-01 Havoc Pennington <hp@redhat.com>Havoc Pennington1-10/+10
* doc/dbus-specification.sgml: clarify the format of a type code, change suggested by Jim Blandy
2003-06-292003-06-29 Miloslav Trmac <mitr@volny.cz>Miloslav Trmac1-6/+8
* doc/Makefile.am: * tools/Makefile.am: Don't assume srcdir == builddir.
2003-06-042003-06-04 Havoc Pennington <hp@pobox.com>Havoc Pennington1-5/+4
* dbus/dbus-server.c (dbus_server_listen): allow abstract sockets using unix:abstract=/foo, and when listening in a tmpdir i.e. unix:tmpdir=/tmp, always use abstract sockets if we can. * dbus/dbus-transport.c (_dbus_transport_open): support unix:abstract=/foo * dbus/dbus-server-unix.c (_dbus_server_new_for_domain_socket): support abstract sockets * dbus/dbus-transport-unix.c (_dbus_transport_new_for_domain_socket): support abstract sockets * dbus/dbus-sysdeps.c (_dbus_connect_unix_socket): add "abstract" toggle as an argument, implement abstract namespace support (_dbus_listen_unix_socket): ditto * configure.in: add --enable-abstract-sockets and implement a configure check for autodetection of the right value.
2003-05-172003-05-17 Havoc Pennington <hp@pobox.com>Havoc Pennington1-0/+10
* bus/config-parser.c (merge_included): merge in policies from child configuration file. * bus/policy.c (bus_policy_merge): function to merge two policies together
2003-05-162003-05-16 Havoc Pennington <hp@redhat.com>Havoc Pennington1-0/+5
* dbus/dbus-connection.c: disable verbose lock spew * tools/dbus-send.c: add --print-reply command line option * tools/dbus-print-message.h (print_message): new util function shared by dbus-send and dbus-monitor * tools/dbus-monitor.c (handler_func): exit on disconnect * dbus/dbus-transport-unix.c (do_reading): if the transport is disconnected, don't try to use the read_watch * dbus/dbus-watch.c (dbus_watch_get_enabled): assert watch != NULL so we can find this bug more easily
2003-05-092003-05-08 Havoc Pennington <hp@pobox.com>Havoc Pennington1-3/+0
* dbus/dbus-spawn.c: s/_exit/exit/ because it was keeping gcov data from getting written, and there wasn't a good reason to use _exit really. * test/decode-gcov.c (mark_inside_dbus_build_tests): don't count dbus_verbose lines in test coverage (main): add list of functions sorted by # of untested blocks to the coverage report * dbus/dbus-mempool.c: put some test-only code in DBUS_BUILD_TESTS * dbus/dbus-marshal.c (_dbus_marshal_test): extend test coverage * dbus/dbus-message-handler.c (_dbus_message_handler_test): extend test coverage * test/data/auth/cancel.auth-script: test canceling an authentication * dbus/Makefile.am: remove dbus-server-debug.[hc] for now, as they aren't used. in CVS history if we end up needing them.
2003-05-05add note to TODO about serial numbersHavoc Pennington1-0/+5
2003-05-032003-05-03 Havoc Pennington <hp@pobox.com>Havoc Pennington3-238/+4
* bus/Makefile.am, bus/dbus-daemon-1.1.in: man page for the daemon; also documents daemon config file, so replaces doc/config-file.txt. Corrected some stuff from config-file.txt in the process of moving it.
2003-04-282003-04-28 Havoc Pennington <hp@redhat.com>Havoc Pennington1-3/+3
* configure.in: add --enable-docs which by default is auto yes if doxygen and db2html found, no otherwise; but can be forced on/off * doc/Makefile.am: conditionalize whether to build docs on --enable-docs
2003-04-252003-04-25 Havoc Pennington <hp@redhat.com>Havoc Pennington1-2/+6
test suite is slightly hosed at the moment, will fix soon * bus/connection.c (bus_connections_expire_incomplete): fix to properly disable the timeout when required (bus_connection_set_name): check whether we can remove incomplete connections timeout after we complete each connection. * dbus/dbus-mainloop.c (check_timeout): fix this up a bit, probably still broken. * bus/services.c (bus_registry_acquire_service): implement max number of services owned, and honor allow/deny rules on which services a connection can own. * bus/connection.c (bus_connection_get_policy): report errors here * bus/activation.c: implement limit on number of pending activations
2003-04-242003-04-24 Havoc Pennington <hp@redhat.com>Havoc Pennington1-1/+29
* test/data/valid-config-files/basic.conf: add <limit> tags to this test * bus/config-parser.h, bus/config-parser.c, bus/bus.c: Implement <limit> tag in configuration file.
2003-04-24remove TODO item for the name_is renameHavoc Pennington1-2/+0
2003-04-242003-04-24 Havoc Pennington <hp@redhat.com>Havoc Pennington1-6/+0
* configure.in: add --enable-checks * dbus/dbus-message.c (dbus_message_new): reverse name/service arguments * dbus/dbus-connection.c (dbus_connection_preallocate_send): fix to use thread locks. (_dbus_connection_handler_destroyed_locked): move some private functions into proper docs group * dbus/dbus-internals.h: add _dbus_return_if_fail, _dbus_return_val_if_fail Throughout: use dbus_return_if_fail
2003-04-232003-04-20 Havoc Pennington <hp@pobox.com>Havoc Pennington2-3/+19
* doc/dbus-specification.sgml: document the restrictions on message and service names
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-24 21:55:14 +0000