# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d.  To create a more complete configuration,
# please review /etc/conf.d/net.example and save your configuration
# in /etc/conf.d/net (this file :]!).

modules="!wpa_supplicant"

config_eth0=(
"202.117.16.121    netmask    255.255.255.0 brd 202.117.16.255"
"192.168.4.121/24"
"dhcp6"
)
routes_eth0=( "default via     202.117.16.1" 
		"192.168.4.0/24 via 192.168.4.1")
dns_servers_eth0="202.117.0.20    202.117.0.21"
dns_search_eth0="p12.edu.cn p13.edu.cn"

config_eth1=(
	"dhcp"
)
enable_ipv6_eth1="true"
routes_eth1=( "default via 202.117.16.1" )
dns_servers_eth1="202.117.0.20 202.117.0.21"
config_eth2=(
"202.117.16.1211    netmask    255.255.255.0 brd 202.117.16.255"
"192.168.4.121/24"
"4321:0:1:2:3:4:567:89ab/64"
)
routes_eth2=("default via  4321:0:1:2:3:4:567:89ab")
enable_ipv6_eth2="true"
config_eth3=("nufjlsjlll")
managed_eth4="false"
routes_eth4=("default via 4321:0:1:2:3:4:567:89ab")
config_eth5=("dhcp")

config_eth7=( "dhcp" )
auto_eth7="true"

# missing config_eth8
auto_eth8="true"

#new openrc style
config_eth9="202.117.16.10/24 202.117.17.10/24"
routes_eth9="default via 202.117.16.1
10.0.0.0/8 via 192.168.0.1
"
config_eth10="202.117.16.2 netmask 255.255.255.0"
routes_eth10="10.0.0.0/8 via 192.168.0.1"

config_myxjtu2=("202.117.16.121/24 brd 202.117.16.255")
routes_myxjtu2=("default via 202.117.16.1")
dns_servers_myxjtu2="202.117.0.20 202.117.0.21"
#key_myxjtu2="[1] s:xjtud key [1] enc restricted"
#key_eth6="[1] aaaa-4444-3d [2] s:xjtudlc key [1] enc open"


username_ppp0='user'
password_ppp0='password'

config_qiaomuf=("dhcp")

config_1xtest=("dhcp")

config_0xab3ace=("dhcp")

modules=( "iproute2" )
	config_kvm0=( "null" )
	config_kvm1=( "null" )

	tuntap_kvm0="tap"
	tuntap_kvm1="tap"
	tunctl_kvm0="-u user"
	tunctl_kvm1="-u user"

bridge_br0="eth0 kvm0 kvm1"
config_br0=( "192.168.1.10/24" )
	brctl_br0=( "setfd 0")
	dhcp_eth1="nosendhost nontp -I"

predown() {
	# The default in the script is to test for NFS root and disallow
	# downing interfaces in that case.  Note that if you specify a
	# predown() function you will override that logic.  Here it is, in
	# case you still want it...
	if is_net_fs /; then
		eerror "root filesystem is network mounted -- can't stop ${IFACE}"
		return 1
	fi

	# Remember to return 0 on success
	return 0
}

postup() {
	# This function could be used, for example, to register with a
	# dynamic DNS service.  Another possibility would be to
	# send/receive mail once the interface is brought up.

	# Here is an example that allows the use of iproute rules
	# which have been configured using the rules_eth0 variable.
	#rules_eth0=" \
	#	'from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100' \
	#	'from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100' \
	#"
	eval set -- \$rules_${IFVAR}
	if [ $# != 0 ]; then
		einfo "Adding IP policy routing rules"
		eindent
		# Ensure that the kernel supports policy routing
		if ! ip rule list | grep -q "^"; then
			eerror "You need to enable IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES)"
			eerror "in your kernel to use ip rules"
		else
			for x; do
				ebegin "${x}"
				ip rule add ${x}
				eend $?
			done
		fi
		eoutdent
		# Flush the cache
		ip route flush cache dev "${IFACE}"
	fi

}

postdown() {
	# Enable Wake-On-LAN for every interface except for lo
	# Probably a good idea to set ifdown="no" in /etc/conf.d/net
	# as well ;)
	[ "${IFACE}" != "lo" ] && ethtool -s "${IFACE}" wol g

	Automatically erase any ip rules created in the example postup above
	if interface_exists "${IFACE}"; then
		# Remove any rules for this interface
		local rule
		ip rule list | grep " iif ${IFACE}[ ]*" | {
			while read rule; do
				rule="${rule#*:}"	
				ip rule del ${rule}
			done
		}
		# Flush the route cache
		ip route flush cache dev "${IFACE}"
	fi

	# Return 0 always
	return 0
}

failup() {
       # This function is mostly here for completeness... I haven't
       # thought of anything nifty to do with it yet ;-)
}

faildown() 
{}