/************************************************************************** Copyright 2001 VA Linux Systems Inc., Fremont, California. Copyright © 2002 by David Dawes All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation on the rights to use, copy, modify, merge, publish, distribute, sub license, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice (including the next paragraph) shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. **************************************************************************/ /* * Authors: Jeff Hartmann * Abraham van der Merwe * David Dawes * Alan Hourihane */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #ifndef PRINT_MODE_INFO #define PRINT_MODE_INFO 0 #endif #include #include #include #include #include #include #include #include "xf86.h" #include "xf86_OSproc.h" #include "xf86Priv.h" #include "xf86cmap.h" #include "compiler.h" #include "mibstore.h" #include "vgaHW.h" #include "mipointer.h" #include "micmap.h" #include "shadowfb.h" #include #include "fb.h" #include "miscstruct.h" #include "dixstruct.h" #include "xf86xv.h" #include #include "shadow.h" #include "i830.h" #include "i830_display.h" #include "i830_debug.h" #include "i830_bios.h" #include "i830_video.h" #if HAVE_SYS_MMAN_H && HAVE_MPROTECT #include #endif #ifdef INTEL_XVMC #define _INTEL_XVMC_SERVER_ #include "i830_hwmc.h" #endif #include #include "i915_drm.h" #include #define BIT(x) (1 << (x)) #define MAX(a,b) ((a) > (b) ? (a) : (b)) #define NB_OF(x) (sizeof (x) / sizeof (*x)) /* *INDENT-OFF* */ static SymTabRec I830Chipsets[] = { {PCI_CHIP_I830_M, "i830"}, {PCI_CHIP_845_G, "845G"}, {PCI_CHIP_I855_GM, "852GM/855GM"}, {PCI_CHIP_I865_G, "865G"}, {PCI_CHIP_I915_G, "915G"}, {PCI_CHIP_E7221_G, "E7221 (i915)"}, {PCI_CHIP_I915_GM, "915GM"}, {PCI_CHIP_I945_G, "945G"}, {PCI_CHIP_I945_GM, "945GM"}, {PCI_CHIP_I945_GME, "945GME"}, {PCI_CHIP_IGD_GM, "IGD"}, {PCI_CHIP_IGD_G, "IGD"}, {PCI_CHIP_I965_G, "965G"}, {PCI_CHIP_G35_G, "G35"}, {PCI_CHIP_I965_Q, "965Q"}, {PCI_CHIP_I946_GZ, "946GZ"}, {PCI_CHIP_I965_GM, "965GM"}, {PCI_CHIP_I965_GME, "965GME/GLE"}, {PCI_CHIP_G33_G, "G33"}, {PCI_CHIP_Q35_G, "Q35"}, {PCI_CHIP_Q33_G, "Q33"}, {PCI_CHIP_GM45_GM, "Mobile Intel® GM45 Express Chipset"}, {PCI_CHIP_IGD_E_G, "Intel Integrated Graphics Device"}, {PCI_CHIP_G45_G, "G45/G43"}, {PCI_CHIP_Q45_G, "Q45/Q43"}, {PCI_CHIP_G41_G, "G41"}, {PCI_CHIP_IGDNG_D_G, "IGDNG_D"}, {PCI_CHIP_IGDNG_M_G, "IGDNG_M"}, {-1, NULL} }; static PciChipsets I830PciChipsets[] = { {PCI_CHIP_I830_M, PCI_CHIP_I830_M, NULL}, {PCI_CHIP_845_G, PCI_CHIP_845_G, NULL}, {PCI_CHIP_I855_GM, PCI_CHIP_I855_GM, NULL}, {PCI_CHIP_I865_G, PCI_CHIP_I865_G, NULL}, {PCI_CHIP_I915_G, PCI_CHIP_I915_G, NULL}, {PCI_CHIP_E7221_G, PCI_CHIP_E7221_G, NULL}, {PCI_CHIP_I915_GM, PCI_CHIP_I915_GM, NULL}, {PCI_CHIP_I945_G, PCI_CHIP_I945_G, NULL}, {PCI_CHIP_I945_GM, PCI_CHIP_I945_GM, NULL}, {PCI_CHIP_I945_GME, PCI_CHIP_I945_GME, NULL}, {PCI_CHIP_IGD_GM, PCI_CHIP_IGD_GM, NULL}, {PCI_CHIP_IGD_G, PCI_CHIP_IGD_G, NULL}, {PCI_CHIP_I965_G, PCI_CHIP_I965_G, NULL}, {PCI_CHIP_G35_G, PCI_CHIP_G35_G, NULL}, {PCI_CHIP_I965_Q, PCI_CHIP_I965_Q, NULL}, {PCI_CHIP_I946_GZ, PCI_CHIP_I946_GZ, NULL}, {PCI_CHIP_I965_GM, PCI_CHIP_I965_GM, NULL}, {PCI_CHIP_I965_GME, PCI_CHIP_I965_GME, NULL}, {PCI_CHIP_G33_G, PCI_CHIP_G33_G, NULL}, {PCI_CHIP_Q35_G, PCI_CHIP_Q35_G, NULL}, {PCI_CHIP_Q33_G, PCI_CHIP_Q33_G, NULL}, {PCI_CHIP_GM45_GM, PCI_CHIP_GM45_GM, NULL}, {PCI_CHIP_IGD_E_G, PCI_CHIP_IGD_E_G, NULL}, {PCI_CHIP_G45_G, PCI_CHIP_G45_G, NULL}, {PCI_CHIP_Q45_G, PCI_CHIP_Q45_G, NULL}, {PCI_CHIP_G41_G, PCI_CHIP_G41_G, NULL}, {PCI_CHIP_IGDNG_D_G, PCI_CHIP_IGDNG_D_G, NULL}, {PCI_CHIP_IGDNG_M_G, PCI_CHIP_IGDNG_M_G, NULL}, {-1, -1, NULL} }; /* * Note: "ColorKey" is provided for compatibility with the i810 driver. * However, the correct option name is "VideoKey". "ColorKey" usually * refers to the tranparency key for 8+24 overlays, not for video overlays. */ typedef enum { OPTION_DRI, OPTION_VIDEO_KEY, OPTION_COLOR_KEY, OPTION_MODEDEBUG, OPTION_FALLBACKDEBUG, OPTION_LVDS24BITMODE, OPTION_FBC, OPTION_TILING, OPTION_SWAPBUFFERS_WAIT, OPTION_LVDSFIXEDMODE, OPTION_FORCEENABLEPIPEA, #ifdef INTEL_XVMC OPTION_XVMC, #endif OPTION_PREFER_OVERLAY, } I830Opts; static OptionInfoRec I830Options[] = { {OPTION_DRI, "DRI", OPTV_BOOLEAN, {0}, TRUE}, {OPTION_COLOR_KEY, "ColorKey", OPTV_INTEGER, {0}, FALSE}, {OPTION_VIDEO_KEY, "VideoKey", OPTV_INTEGER, {0}, FALSE}, {OPTION_MODEDEBUG, "ModeDebug", OPTV_BOOLEAN, {0}, FALSE}, {OPTION_FALLBACKDEBUG, "FallbackDebug", OPTV_BOOLEAN, {0}, FALSE}, {OPTION_LVDS24BITMODE, "LVDS24Bit", OPTV_BOOLEAN, {0}, FALSE}, {OPTION_FBC, "FramebufferCompression", OPTV_BOOLEAN, {0}, TRUE}, {OPTION_TILING, "Tiling", OPTV_BOOLEAN, {0}, TRUE}, {OPTION_SWAPBUFFERS_WAIT, "SwapbuffersWait", OPTV_BOOLEAN, {0}, TRUE}, {OPTION_LVDSFIXEDMODE, "LVDSFixedMode", OPTV_BOOLEAN, {0}, FALSE}, {OPTION_FORCEENABLEPIPEA, "ForceEnablePipeA", OPTV_BOOLEAN, {0}, FALSE}, #ifdef INTEL_XVMC {OPTION_XVMC, "XvMC", OPTV_BOOLEAN, {0}, TRUE}, #endif {OPTION_PREFER_OVERLAY, "XvPreferOverlay", OPTV_BOOLEAN, {0}, FALSE}, {-1, NULL, OPTV_NONE, {0}, FALSE} }; /* *INDENT-ON* */ static void i830AdjustFrame(int scrnIndex, int x, int y, int flags); static Bool I830CloseScreen(int scrnIndex, ScreenPtr pScreen); static Bool I830EnterVT(int scrnIndex, int flags); static Bool SaveHWState(ScrnInfoPtr pScrn); static Bool RestoreHWState(ScrnInfoPtr pScrn); /* temporary */ extern void xf86SetCursor(ScreenPtr pScreen, CursorPtr pCurs, int x, int y); #ifdef I830DEBUG void I830DPRINTF(const char *filename, int line, const char *function, const char *fmt, ...) { va_list ap; ErrorF("\n##############################################\n" "*** In function %s, on line %d, in file %s ***\n", function, line, filename); va_start(ap, fmt); VErrorF(fmt, ap); va_end(ap); ErrorF("##############################################\n\n"); } #endif /* #ifdef I830DEBUG */ /* Export I830 options to i830 driver where necessary */ const OptionInfoRec * I830AvailableOptions(int chipid, int busid) { int i; for (i = 0; I830PciChipsets[i].PCIid > 0; i++) { if (chipid == I830PciChipsets[i].PCIid) return I830Options; } return NULL; } static Bool I830GetRec(ScrnInfoPtr pScrn) { I830Ptr pI830; if (pScrn->driverPrivate) return TRUE; pI830 = pScrn->driverPrivate = xnfcalloc(sizeof(I830Rec), 1); return TRUE; } static void I830FreeRec(ScrnInfoPtr pScrn) { I830Ptr pI830; if (!pScrn) return; if (!pScrn->driverPrivate) return; pI830 = I830PTR(pScrn); xfree(pScrn->driverPrivate); pScrn->driverPrivate = NULL; } static int I830DetectMemory(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); uint16_t gmch_ctrl; int memsize = 0, gtt_size; int range; struct pci_device *bridge = intel_host_bridge (); pci_device_cfg_read_u16(bridge, & gmch_ctrl, I830_GMCH_CTRL); if (IS_I965G(pI830)) { /* The 965 may have a GTT that is actually larger than is necessary * to cover the aperture, so check the hardware's reporting of the * GTT size. */ switch (INREG(PGETBL_CTL) & PGETBL_SIZE_MASK) { case PGETBL_SIZE_512KB: gtt_size = 512; break; case PGETBL_SIZE_256KB: gtt_size = 256; break; case PGETBL_SIZE_128KB: gtt_size = 128; break; case PGETBL_SIZE_1MB: gtt_size = 1024; break; case PGETBL_SIZE_2MB: gtt_size = 2048; break; case PGETBL_SIZE_1_5MB: gtt_size = 1024 + 512; break; default: FatalError("Unknown GTT size value: %08x\n", (int)INREG(PGETBL_CTL)); } } else if (IS_G33CLASS(pI830)) { /* G33's GTT size is detect in GMCH_CTRL */ switch (gmch_ctrl & G33_PGETBL_SIZE_MASK) { case G33_PGETBL_SIZE_1M: gtt_size = 1024; break; case G33_PGETBL_SIZE_2M: gtt_size = 2048; break; default: FatalError("Unknown GTT size value: %08x\n", (int)(gmch_ctrl & G33_PGETBL_SIZE_MASK)); } } else { /* Older chipsets only had GTT appropriately sized for the aperture. */ gtt_size = pI830->FbMapSize / (1024*1024); } xf86DrvMsg(pScrn->scrnIndex, X_INFO, "detected %d kB GTT.\n", gtt_size); /* The stolen memory has the GTT at the top, and the 4KB popup below that. * Everything else can be freely used by the graphics driver. */ range = gtt_size + 4; /* new 4 series hardware has seperate GTT stolen with GFX stolen */ if (IS_G4X(pI830) || IS_IGD(pI830) || IS_IGDNG(pI830)) range = 4; if (IS_I85X(pI830) || IS_I865G(pI830) || IS_I9XX(pI830)) { switch (gmch_ctrl & I855_GMCH_GMS_MASK) { case I855_GMCH_GMS_STOLEN_1M: memsize = MB(1) - KB(range); break; case I855_GMCH_GMS_STOLEN_4M: memsize = MB(4) - KB(range); break; case I855_GMCH_GMS_STOLEN_8M: memsize = MB(8) - KB(range); break; case I855_GMCH_GMS_STOLEN_16M: memsize = MB(16) - KB(range); break; case I855_GMCH_GMS_STOLEN_32M: memsize = MB(32) - KB(range); break; case I915G_GMCH_GMS_STOLEN_48M: if (IS_I9XX(pI830)) memsize = MB(48) - KB(range); break; case I915G_GMCH_GMS_STOLEN_64M: if (IS_I9XX(pI830)) memsize = MB(64) - KB(range); break; case G33_GMCH_GMS_STOLEN_128M: if (IS_I9XX(pI830)) memsize = MB(128) - KB(range); break; case G33_GMCH_GMS_STOLEN_256M: if (IS_I9XX(pI830)) memsize = MB(256) - KB(range); break; case INTEL_GMCH_GMS_STOLEN_96M: if (IS_I9XX(pI830)) memsize = MB(96) - KB(range); break; case INTEL_GMCH_GMS_STOLEN_160M: if (IS_I9XX(pI830)) memsize = MB(160) - KB(range); break; case INTEL_GMCH_GMS_STOLEN_224M: if (IS_I9XX(pI830)) memsize = MB(224) - KB(range); break; case INTEL_GMCH_GMS_STOLEN_352M: if (IS_I9XX(pI830)) memsize = MB(352) - KB(range); break; } } else { switch (gmch_ctrl & I830_GMCH_GMS_MASK) { case I830_GMCH_GMS_STOLEN_512: memsize = KB(512) - KB(range); break; case I830_GMCH_GMS_STOLEN_1024: memsize = MB(1) - KB(range); break; case I830_GMCH_GMS_STOLEN_8192: memsize = MB(8) - KB(range); break; case I830_GMCH_GMS_LOCAL: memsize = 0; xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Local memory found, but won't be used.\n"); break; } } #if 0 /* And 64KB page aligned */ memsize &= ~0xFFFF; #endif if (memsize > 0) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "detected %d kB stolen memory.\n", memsize / 1024); } else { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "no video memory detected.\n"); } return memsize; } static Bool I830MapMMIO(ScrnInfoPtr pScrn) { int err; struct pci_device *device; I830Ptr pI830 = I830PTR(pScrn); device = pI830->PciInfo; err = pci_device_map_range (device, pI830->MMIOAddr, pI830->MMIOSize, PCI_DEV_MAP_FLAG_WRITABLE, (void **) &pI830->MMIOBase); if (err) { xf86DrvMsg (pScrn->scrnIndex, X_ERROR, "Unable to map mmio range. %s (%d)\n", strerror (err), err); return FALSE; } /* Set up the GTT mapping for the various places it has been moved over * time. */ if (IS_I9XX(pI830)) { uint32_t gttaddr; if (IS_I965G(pI830)) { if (IS_G4X(pI830) || IS_IGDNG(pI830)) { gttaddr = pI830->MMIOAddr + MB(2); pI830->GTTMapSize = MB(2); } else { gttaddr = pI830->MMIOAddr + KB(512); pI830->GTTMapSize = KB(512); } } else { gttaddr = I810_MEMBASE(pI830->PciInfo, 3) & 0xFFFFFF00; pI830->GTTMapSize = pI830->FbMapSize / 1024; } err = pci_device_map_range (device, gttaddr, pI830->GTTMapSize, PCI_DEV_MAP_FLAG_WRITABLE, (void **) &pI830->GTTBase); if (err) { xf86DrvMsg (pScrn->scrnIndex, X_ERROR, "Unable to map GTT range. %s (%d)\n", strerror (err), err); return FALSE; } } else { /* The GTT aperture on i830 is write-only. We could probably map the * actual physical pages that back it, but leave it alone for now. */ pI830->GTTBase = NULL; pI830->GTTMapSize = 0; } return TRUE; } static Bool I830MapMem(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); long i; struct pci_device *const device = pI830->PciInfo; int err; for (i = 2; i < pI830->FbMapSize; i <<= 1) ; pI830->FbMapSize = i; err = pci_device_map_range (device, pI830->LinearAddr, pI830->FbMapSize, PCI_DEV_MAP_FLAG_WRITABLE | PCI_DEV_MAP_FLAG_WRITE_COMBINE, (void **) &pI830->FbBase); if (err) return FALSE; if (pI830->ring.mem != NULL) { pI830->ring.virtual_start = pI830->FbBase + pI830->ring.mem->offset; } return TRUE; } static void I830UnmapMMIO(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); pci_device_unmap_range (pI830->PciInfo, pI830->MMIOBase, pI830->MMIOSize); pI830->MMIOBase = NULL; if (IS_I9XX(pI830)) { pci_device_unmap_range (pI830->PciInfo, pI830->GTTBase, pI830->GTTMapSize); pI830->GTTBase = NULL; } } static Bool I830UnmapMem(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); pci_device_unmap_range (pI830->PciInfo, pI830->FbBase, pI830->FbMapSize); pI830->FbBase = NULL; I830UnmapMMIO(pScrn); return TRUE; } static void I830LoadPalette(ScrnInfoPtr pScrn, int numColors, int *indices, LOCO * colors, VisualPtr pVisual) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); int i,j, index; int p; uint16_t lut_r[256], lut_g[256], lut_b[256]; DPRINTF(PFX, "I830LoadPalette: numColors: %d\n", numColors); for(p = 0; p < xf86_config->num_crtc; p++) { xf86CrtcPtr crtc = xf86_config->crtc[p]; I830CrtcPrivatePtr intel_crtc = crtc->driver_private; /* Initialize to the old lookup table values. */ for (i = 0; i < 256; i++) { lut_r[i] = intel_crtc->lut_r[i] << 8; lut_g[i] = intel_crtc->lut_g[i] << 8; lut_b[i] = intel_crtc->lut_b[i] << 8; } switch(pScrn->depth) { case 15: for (i = 0; i < numColors; i++) { index = indices[i]; for (j = 0; j < 8; j++) { lut_r[index * 8 + j] = colors[index].red << 8; lut_g[index * 8 + j] = colors[index].green << 8; lut_b[index * 8 + j] = colors[index].blue << 8; } } break; case 16: for (i = 0; i < numColors; i++) { index = indices[i]; if (index <= 31) { for (j = 0; j < 8; j++) { lut_r[index * 8 + j] = colors[index].red << 8; lut_b[index * 8 + j] = colors[index].blue << 8; } } for (j = 0; j < 4; j++) { lut_g[index * 4 + j] = colors[index].green << 8; } } break; default: for (i = 0; i < numColors; i++) { index = indices[i]; lut_r[index] = colors[index].red << 8; lut_g[index] = colors[index].green << 8; lut_b[index] = colors[index].blue << 8; } break; } /* Make the change through RandR */ #ifdef RANDR_12_INTERFACE RRCrtcGammaSet(crtc->randr_crtc, lut_r, lut_g, lut_b); #else crtc->funcs->gamma_set(crtc, lut_r, lut_g, lut_b, 256); #endif } } /** * Adjust the screen pixmap for the current location of the front buffer. * This is done at EnterVT when buffers are bound as long as the resources * have already been created, but the first EnterVT happens before * CreateScreenResources. */ static Bool i830CreateScreenResources(ScreenPtr pScreen) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; I830Ptr pI830 = I830PTR(pScrn); pScreen->CreateScreenResources = pI830->CreateScreenResources; if (!(*pScreen->CreateScreenResources)(pScreen)) return FALSE; i830_uxa_create_screen_resources(pScreen); return TRUE; } static int i830_output_clones (ScrnInfoPtr pScrn, int type_mask) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR (pScrn); int o; int index_mask = 0; for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; I830OutputPrivatePtr intel_output = output->driver_private; if (type_mask & (1 << intel_output->type)) index_mask |= (1 << o); } return index_mask; } /** * Set up the outputs according to what type of chip we are. * * Some outputs may not initialize, due to allocation failure or because a * controller chip isn't found. */ static void I830SetupOutputs(ScrnInfoPtr pScrn) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR (pScrn); I830Ptr pI830 = I830PTR(pScrn); int o, c; Bool lvds_detected = FALSE; /* everyone has at least a single analog output */ i830_crt_init(pScrn); /* Set up integrated LVDS */ if (IS_MOBILE(pI830) && !IS_I830(pI830)) i830_lvds_init(pScrn); if (IS_I9XX(pI830)) { Bool found = FALSE; if ((INREG(SDVOB) & SDVO_DETECTED)) { found = i830_sdvo_init(pScrn, SDVOB); if (!found && SUPPORTS_INTEGRATED_HDMI(pI830)) i830_hdmi_init(pScrn, SDVOB); } if ((INREG(SDVOB) & SDVO_DETECTED)) found = i830_sdvo_init(pScrn, SDVOC); if ((INREG(SDVOC) & SDVO_DETECTED) && !found && SUPPORTS_INTEGRATED_HDMI(pI830)) i830_hdmi_init(pScrn, SDVOC); } else { i830_dvo_init(pScrn); } if (IS_I9XX(pI830) && IS_MOBILE(pI830)) i830_tv_init(pScrn); for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; I830OutputPrivatePtr intel_output = output->driver_private; int crtc_mask; if (intel_output->type == I830_OUTPUT_LVDS) lvds_detected = TRUE; crtc_mask = 0; for (c = 0; c < config->num_crtc; c++) { xf86CrtcPtr crtc = config->crtc[c]; I830CrtcPrivatePtr intel_crtc = crtc->driver_private; if (intel_output->pipe_mask & (1 << intel_crtc->pipe)) crtc_mask |= (1 << c); } output->possible_crtcs = crtc_mask; output->possible_clones = i830_output_clones (pScrn, intel_output->clone_mask); } } static void i830_init_clock_gating(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); /* Disable clock gating reported to work incorrectly according to the specs. */ if (IS_G4X(pI830)) { uint32_t dspclk_gate; OUTREG(RENCLK_GATE_D1, 0); OUTREG(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | GS_UNIT_CLOCK_GATE_DISABLE | CL_UNIT_CLOCK_GATE_DISABLE); OUTREG(RAMCLK_GATE_D, 0); dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE | OVRUNIT_CLOCK_GATE_DISABLE | OVCUNIT_CLOCK_GATE_DISABLE; if (IS_GM45(pI830)) dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE; OUTREG(DSPCLK_GATE_D, dspclk_gate); } else if (IS_I965GM(pI830)) { OUTREG(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE); OUTREG(RENCLK_GATE_D2, 0); OUTREG(DSPCLK_GATE_D, 0); OUTREG(RAMCLK_GATE_D, 0); OUTREG16(DEUC, 0); } else if (IS_I965G(pI830)) { OUTREG(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE | I965_RCC_CLOCK_GATE_DISABLE | I965_RCPB_CLOCK_GATE_DISABLE | I965_ISC_CLOCK_GATE_DISABLE | I965_FBC_CLOCK_GATE_DISABLE); OUTREG(RENCLK_GATE_D2, 0); } else if (IS_I855(pI830) || IS_I865G(pI830)) { OUTREG(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE); } else if (IS_I830(pI830)) { OUTREG(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE); } } static void i830_init_bios_control(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); /* Set "extended desktop" */ OUTREG(SWF0, INREG(SWF0) | (1 << 21)); /* Set "driver loaded", "OS unknown", "APM 1.2" */ OUTREG(SWF4, (INREG(SWF4) & ~((3 << 19) | (7 << 16))) | (1 << 23) | (2 << 16)); } static int I830LVDSPresent(ScrnInfoPtr pScrn) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR (pScrn); int o, lvds_detected = FALSE; for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; I830OutputPrivatePtr intel_output = output->driver_private; if (intel_output->type == I830_OUTPUT_LVDS) lvds_detected = TRUE; } return lvds_detected; } /** * Setup the CRTCs */ static void I830PreInitDDC(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); if (!xf86LoadSubModule(pScrn, "ddc")) { pI830->ddc2 = FALSE; } else { pI830->ddc2 = TRUE; } /* DDC can use I2C bus */ /* Load I2C if we have the code to use it */ if (pI830->ddc2) { if (xf86LoadSubModule(pScrn, "i2c")) { pI830->ddc2 = TRUE; } else { pI830->ddc2 = FALSE; } } } static void PreInitCleanup(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); if (pI830->MMIOBase) I830UnmapMMIO(pScrn); I830FreeRec(pScrn); } /* * Adjust *width to allow for tiling if possible */ Bool i830_tiled_width(I830Ptr i830, int *width, int cpp) { Bool tiled = FALSE; /* * Adjust the display width to allow for front buffer tiling if possible */ if (i830->tiling) { if (IS_I965G(i830)) { int tile_pixels = 512 / cpp; *width = (*width + tile_pixels - 1) & ~(tile_pixels - 1); tiled = TRUE; } else { /* Good pitches to allow tiling. Don't care about pitches < 1024 * pixels. */ static const int pitches[] = { 1024, 2048, 4096, 8192, 0 }; int i; for (i = 0; pitches[i] != 0; i++) { if (pitches[i] >= *width) { *width = pitches[i]; tiled = TRUE; break; } } } } return tiled; } /* * Pad to accelerator requirement */ int i830_pad_drawable_width(int width, int cpp) { return (width + 63) & ~63; } static Bool i830_xf86crtc_resize (ScrnInfoPtr scrn, int width, int height) { #ifdef DRI2 I830Ptr i830 = I830PTR(scrn); int old_width = scrn->displayWidth; #endif int old_x = scrn->virtualX; int old_y = scrn->virtualY; if (old_x == width && old_y == height) return TRUE; scrn->virtualX = width; scrn->virtualY = height; #ifdef DRI2 if (i830->front_buffer) { i830_memory *new_front, *old_front; Bool tiled; ScreenPtr screen = screenInfo.screens[scrn->scrnIndex]; scrn->displayWidth = i830_pad_drawable_width(width, i830->cpp); tiled = i830_tiled_width(i830, &scrn->displayWidth, i830->cpp); xf86DrvMsg(scrn->scrnIndex, X_INFO, "Allocate new frame buffer %dx%d stride %d\n", width, height, scrn->displayWidth); I830Sync(scrn); i830WaitForVblank(scrn); new_front = i830_allocate_framebuffer(scrn); if (!new_front) { scrn->virtualX = old_x; scrn->virtualY = old_y; scrn->displayWidth = old_width; return FALSE; } old_front = i830->front_buffer; i830->front_buffer = new_front; i830_set_pixmap_bo(screen->GetScreenPixmap(screen), new_front->bo); scrn->fbOffset = i830->front_buffer->offset; screen->ModifyPixmapHeader(screen->GetScreenPixmap(screen), width, height, -1, -1, scrn->displayWidth * i830->cpp, i830->FbBase + scrn->fbOffset); /* ick. xf86EnableDisableFBAccess smashes the screen pixmap devPrivate, * so update the value it uses */ scrn->pixmapPrivate.ptr = i830->FbBase + scrn->fbOffset; xf86DrvMsg(scrn->scrnIndex, X_INFO, "New front buffer at 0x%lx\n", i830->front_buffer->offset); i830_set_new_crtc_bo(scrn); I830Sync(scrn); i830WaitForVblank(scrn); i830_free_memory(scrn, old_front); } #endif return TRUE; } static const xf86CrtcConfigFuncsRec i830_xf86crtc_config_funcs = { i830_xf86crtc_resize }; #define HOTKEY_BIOS_SWITCH 0 #define HOTKEY_DRIVER_NOTIFY 1 /** * Controls the BIOS's behavior on hotkey switch. * * If the mode is HOTKEY_BIOS_SWITCH, the BIOS will be set to do a mode switch * on its own and update the state in the scratch register. * If the mode is HOTKEY_DRIVER_NOTIFY, the BIOS won't do a mode switch and * will just update the state to represent what it would have been switched to. */ static void i830SetHotkeyControl(ScrnInfoPtr pScrn, int mode) { I830Ptr pI830 = I830PTR(pScrn); uint8_t gr18; /* Don't mess with kernel settings... */ if (pI830->use_drm_mode) return; gr18 = pI830->readControl(pI830, GRX, 0x18); if (mode == HOTKEY_BIOS_SWITCH) gr18 &= ~HOTKEY_VBIOS_SWITCH_BLOCK; else gr18 |= HOTKEY_VBIOS_SWITCH_BLOCK; pI830->writeControl(pI830, GRX, 0x18, gr18); } /* * DRM mode setting Linux only at this point... later on we could * add a wrapper here. */ static Bool i830_kernel_mode_enabled(ScrnInfoPtr pScrn) { struct pci_device *PciInfo; EntityInfoPtr pEnt; char *busIdString; int ret; pEnt = xf86GetEntityInfo(pScrn->entityList[0]); PciInfo = xf86GetPciInfoForEntity(pEnt->index); if (!xf86LoaderCheckSymbol("DRICreatePCIBusID")) return FALSE; busIdString = DRICreatePCIBusID(PciInfo); ret = drmCheckModesettingSupported(busIdString); if (ret) { if (xf86LoadKernelModule("i915")) ret = drmCheckModesettingSupported(busIdString); } /* Be nice to the user and load fbcon too */ if (!ret) (void) xf86LoadKernelModule("fbcon"); xfree(busIdString); if (ret) return FALSE; return TRUE; } static Bool i830_detect_chipset(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); MessageType from = X_PROBED; const char *chipname; uint32_t capid; int fb_bar, mmio_bar; /* We have to use PIO to probe, because we haven't mapped yet. */ if (!pI830->use_drm_mode) I830SetPIOAccess(pI830); switch (DEVICE_ID(pI830->PciInfo)) { case PCI_CHIP_I830_M: chipname = "830M"; break; case PCI_CHIP_845_G: chipname = "845G"; break; case PCI_CHIP_I855_GM: /* Check capid register to find the chipset variant */ pci_device_cfg_read_u32 (pI830->PciInfo, &capid, I85X_CAPID); pI830->variant = (capid >> I85X_VARIANT_SHIFT) & I85X_VARIANT_MASK; switch (pI830->variant) { case I855_GM: chipname = "855GM"; break; case I855_GME: chipname = "855GME"; break; case I852_GM: chipname = "852GM"; break; case I852_GME: chipname = "852GME"; break; default: xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Unknown 852GM/855GM variant: 0x%x)\n", pI830->variant); chipname = "852GM/855GM (unknown variant)"; break; } break; case PCI_CHIP_I865_G: chipname = "865G"; break; case PCI_CHIP_I915_G: chipname = "915G"; break; case PCI_CHIP_E7221_G: chipname = "E7221 (i915)"; break; case PCI_CHIP_I915_GM: chipname = "915GM"; break; case PCI_CHIP_I945_G: chipname = "945G"; break; case PCI_CHIP_I945_GM: chipname = "945GM"; break; case PCI_CHIP_I945_GME: chipname = "945GME"; break; case PCI_CHIP_IGD_GM: chipname = "IGD"; break; case PCI_CHIP_IGD_G: chipname = "IGD"; break; case PCI_CHIP_I965_G: chipname = "965G"; break; case PCI_CHIP_G35_G: chipname = "G35"; break; case PCI_CHIP_I965_Q: chipname = "965Q"; break; case PCI_CHIP_I946_GZ: chipname = "946GZ"; break; case PCI_CHIP_I965_GM: chipname = "965GM"; break; case PCI_CHIP_I965_GME: chipname = "965GME/GLE"; break; case PCI_CHIP_G33_G: chipname = "G33"; break; case PCI_CHIP_Q35_G: chipname = "Q35"; break; case PCI_CHIP_Q33_G: chipname = "Q33"; break; case PCI_CHIP_GM45_GM: chipname = "Mobile Intel® GM45 Express Chipset"; break; case PCI_CHIP_IGD_E_G: chipname = "Intel Integrated Graphics Device"; break; case PCI_CHIP_G45_G: chipname = "G45/G43"; break; case PCI_CHIP_Q45_G: chipname = "Q45/Q43"; break; case PCI_CHIP_G41_G: chipname = "G41"; break; case PCI_CHIP_IGDNG_D_G: chipname = "IGDNG_D"; break; case PCI_CHIP_IGDNG_M_G: chipname = "IGDNG_M"; break; default: chipname = "unknown chipset"; break; } xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Integrated Graphics Chipset: Intel(R) %s\n", chipname); /* Set the Chipset and ChipRev, allowing config file entries to override. */ if (pI830->pEnt->device->chipset && *pI830->pEnt->device->chipset) { pScrn->chipset = pI830->pEnt->device->chipset; from = X_CONFIG; } else if (pI830->pEnt->device->chipID >= 0) { pScrn->chipset = (char *)xf86TokenToString(I830Chipsets, pI830->pEnt->device->chipID); from = X_CONFIG; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ChipID override: 0x%04X\n", pI830->pEnt->device->chipID); DEVICE_ID(pI830->PciInfo) = pI830->pEnt->device->chipID; } else { from = X_PROBED; pScrn->chipset = (char *)xf86TokenToString(I830Chipsets, DEVICE_ID(pI830->PciInfo)); } if (pI830->pEnt->device->chipRev >= 0) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ChipRev override: %d\n", pI830->pEnt->device->chipRev); } xf86DrvMsg(pScrn->scrnIndex, from, "Chipset: \"%s\"\n", (pScrn->chipset != NULL) ? pScrn->chipset : "Unknown i8xx"); /* Check if the HW cursor needs physical address. */ if (IS_MOBILE(pI830) || IS_I9XX(pI830)) pI830->CursorNeedsPhysical = TRUE; else pI830->CursorNeedsPhysical = FALSE; if (IS_I965G(pI830) || IS_G33CLASS(pI830)) pI830->CursorNeedsPhysical = FALSE; /* Skip the rest if the kernel is taking care of things */ if (pI830->use_drm_mode) return TRUE; /* Now that we know the chipset, figure out the resource base addrs */ if (IS_I9XX(pI830)) { fb_bar = 2; mmio_bar = 0; } else { fb_bar = 0; mmio_bar = 1; } if (pI830->pEnt->device->MemBase != 0) { pI830->LinearAddr = pI830->pEnt->device->MemBase; from = X_CONFIG; } else { pI830->LinearAddr = I810_MEMBASE (pI830->PciInfo, fb_bar); if (pI830->LinearAddr == 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid FB address in PCI config space\n"); PreInitCleanup(pScrn); return FALSE; } } xf86DrvMsg(pScrn->scrnIndex, from, "Linear framebuffer at 0x%lX\n", (unsigned long)pI830->LinearAddr); if (pI830->pEnt->device->IOBase != 0) { pI830->MMIOAddr = pI830->pEnt->device->IOBase; from = X_CONFIG; pI830->MMIOSize = I810_REG_SIZE; } else { pI830->MMIOAddr = I810_MEMBASE (pI830->PciInfo, mmio_bar); if (pI830->MMIOAddr == 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid MMIO address in PCI config space\n"); PreInitCleanup(pScrn); return FALSE; } pI830->MMIOSize = pI830->PciInfo->regions[mmio_bar].size; } xf86DrvMsg(pScrn->scrnIndex, from, "IO registers at addr 0x%lX size %u\n", (unsigned long)pI830->MMIOAddr, pI830->MMIOSize); /* Now figure out mapsize on 8xx chips */ if (IS_I830(pI830) || IS_845G(pI830)) { uint16_t gmch_ctrl; struct pci_device *bridge; bridge = intel_host_bridge (); pci_device_cfg_read_u16 (bridge, &gmch_ctrl, I830_GMCH_CTRL); if ((gmch_ctrl & I830_GMCH_MEM_MASK) == I830_GMCH_MEM_128M) { pI830->FbMapSize = 0x8000000; } else { pI830->FbMapSize = 0x4000000; /* 64MB - has this been tested ?? */ } } else { if (IS_I9XX(pI830)) { pI830->FbMapSize = pI830->PciInfo->regions[fb_bar].size; } else { /* 128MB aperture for later i8xx series. */ pI830->FbMapSize = 0x8000000; } } return TRUE; } static Bool I830LoadSyms(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); if (pI830->use_drm_mode) return TRUE; /* The vgahw module should be loaded here when needed */ if (!xf86LoadSubModule(pScrn, "vgahw")) return FALSE; if (!xf86LoadSubModule(pScrn, "ramdac")) return FALSE; return TRUE; } static Bool I830GetEarlyOptions(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); /* Process the options */ xf86CollectOptions(pScrn, NULL); if (!(pI830->Options = xalloc(sizeof(I830Options)))) return FALSE; memcpy(pI830->Options, I830Options, sizeof(I830Options)); xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, pI830->Options); pI830->fallback_debug = xf86ReturnOptValBool(pI830->Options, OPTION_FALLBACKDEBUG, FALSE); if (xf86ReturnOptValBool(pI830->Options, OPTION_MODEDEBUG, FALSE)) { pI830->debug_modes = TRUE; } else { pI830->debug_modes = FALSE; } if (xf86ReturnOptValBool(pI830->Options, OPTION_LVDS24BITMODE, FALSE)) { pI830->lvds_24_bit_mode = TRUE; } else { pI830->lvds_24_bit_mode = FALSE; } if (xf86ReturnOptValBool(pI830->Options, OPTION_LVDSFIXEDMODE, TRUE)) { pI830->skip_panel_detect = FALSE; } else { pI830->skip_panel_detect = TRUE; } if (xf86ReturnOptValBool(pI830->Options, OPTION_FORCEENABLEPIPEA, FALSE)) pI830->quirk_flag |= QUIRK_PIPEA_FORCE; return TRUE; } static void I830PreInitCrtcConfig(ScrnInfoPtr pScrn) { xf86CrtcConfigPtr xf86_config; I830Ptr pI830 = I830PTR(pScrn); int max_width, max_height; /* check quirks */ i830_fixup_devices(pScrn); /* Allocate an xf86CrtcConfig */ xf86CrtcConfigInit (pScrn, &i830_xf86crtc_config_funcs); xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); /* See i830_exa.c comments for why we limit the framebuffer size like this. */ if (IS_I965G(pI830)) { max_height = max_width = min(16384 / pI830->cpp, 8192); } else { max_width = 2048; max_height = 2048; } xf86CrtcSetSizeRange (pScrn, 320, 200, max_width, max_height); } static void i830_check_dri_option(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); pI830->directRenderingType = DRI_NONE; if (!xf86ReturnOptValBool(pI830->Options, OPTION_DRI, TRUE)) pI830->directRenderingType = DRI_DISABLED; if (pScrn->depth != 16 && pScrn->depth != 24) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "DRI is disabled because it " "runs only at depths 16 and 24.\n"); pI830->directRenderingType = DRI_DISABLED; } } static Bool i830_user_modesetting_init(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); int i, num_pipe; I830MapMMIO(pScrn); if (pI830->debug_modes) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Hardware state on X startup:\n"); i830DumpRegs (pScrn); } i830TakeRegSnapshot(pScrn); if (DEVICE_ID(pI830->PciInfo) == PCI_CHIP_E7221_G) num_pipe = 1; else if (IS_MOBILE(pI830) || IS_I9XX(pI830)) num_pipe = 2; else num_pipe = 1; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "%d display pipe%s available.\n", num_pipe, num_pipe > 1 ? "s" : ""); I830PreInitDDC(pScrn); for (i = 0; i < num_pipe; i++) { i830_crtc_init(pScrn, i); } I830SetupOutputs(pScrn); SaveHWState(pScrn); if (!xf86InitialConfiguration (pScrn, TRUE)) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid modes.\n"); RestoreHWState(pScrn); PreInitCleanup(pScrn); return FALSE; } RestoreHWState(pScrn); /* XXX This should go away, replaced by xf86Crtc.c support for it */ pI830->rotation = RR_Rotate_0; pI830->stolen_size = I830DetectMemory(pScrn); return TRUE; } static Bool i830_open_drm_master(ScrnInfoPtr scrn) { I830Ptr i830 = I830PTR(scrn); struct pci_device *dev = i830->PciInfo; char *busid; drmSetVersion sv; struct drm_i915_getparam gp; int err, has_gem; /* We wish we had asprintf, but all we get is XNFprintf. */ busid = XNFprintf("pci:%04x:%02x:%02x.%d", dev->domain, dev->bus, dev->dev, dev->func); i830->drmSubFD = drmOpen("i915", busid); if (i830->drmSubFD == -1) { xfree(busid); xf86DrvMsg(scrn->scrnIndex, X_ERROR, "[drm] Failed to open DRM device for %s: %s\n", busid, strerror(errno)); return FALSE; } xfree(busid); /* Check that what we opened was a master or a master-capable FD, * by setting the version of the interface we'll use to talk to it. * (see DRIOpenDRMMaster() in DRI1) */ sv.drm_di_major = 1; sv.drm_di_minor = 1; sv.drm_dd_major = -1; sv.drm_dd_minor = -1; err = drmSetInterfaceVersion(i830->drmSubFD, &sv); if (err != 0) { xf86DrvMsg(scrn->scrnIndex, X_ERROR, "[drm] failed to set drm interface version.\n"); drmClose(i830->drmSubFD); i830->drmSubFD = -1; return FALSE; } has_gem = FALSE; gp.param = I915_PARAM_HAS_GEM; gp.value = &has_gem; (void)drmCommandWriteRead(i830->drmSubFD, DRM_I915_GETPARAM, &gp, sizeof(gp)); if (!has_gem) { xf86DrvMsg(scrn->scrnIndex, X_ERROR, "[drm] Failed to detect GEM. Kernel 2.6.28 required.\n"); drmClose(i830->drmSubFD); i830->drmSubFD = -1; return FALSE; } return TRUE; } static void i830_close_drm_master(ScrnInfoPtr scrn) { I830Ptr i830 = I830PTR(scrn); if (i830 && i830->drmSubFD > 0) { drmClose(i830->drmSubFD); i830->drmSubFD = -1; } } static Bool I830DrmModeInit(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); if (drmmode_pre_init(pScrn, pI830->drmSubFD, pI830->cpp) == FALSE) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Kernel modesetting setup failed\n"); PreInitCleanup(pScrn); return FALSE; } pI830->have_gem = TRUE; i830_init_bufmgr(pScrn); return TRUE; } static void I830XvInit(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); MessageType from = X_PROBED; pI830->XvPreferOverlay = xf86ReturnOptValBool(pI830->Options, OPTION_PREFER_OVERLAY, FALSE); if (xf86GetOptValInteger(pI830->Options, OPTION_VIDEO_KEY, &(pI830->colorKey))) { from = X_CONFIG; } else if (xf86GetOptValInteger(pI830->Options, OPTION_COLOR_KEY, &(pI830->colorKey))) { from = X_CONFIG; } else { pI830->colorKey = (1 << pScrn->offset.red) | (1 << pScrn->offset.green) | (((pScrn->mask.blue >> pScrn->offset.blue) - 1) << pScrn->offset.blue); from = X_DEFAULT; } xf86DrvMsg(pScrn->scrnIndex, from, "video overlay key set to 0x%x\n", pI830->colorKey); } /** * This is called before ScreenInit to do any require probing of screen * configuration. * * This code generally covers probing, module loading, option handling * card mapping, and RandR setup. * * Since xf86InitialConfiguration ends up requiring that we set video modes * in order to detect configuration, we end up having to do a lot of driver * setup (talking to the DRM, mapping the device, etc.) in this function. * As a result, we want to set up that server initialization once rather * that doing it per generation. */ static Bool I830PreInit(ScrnInfoPtr pScrn, int flags) { vgaHWPtr hwp; I830Ptr pI830; rgb defaultWeight = { 0, 0, 0 }; EntityInfoPtr pEnt; int flags24; Gamma zeros = { 0.0, 0.0, 0.0 }; int drm_mode_setting; if (pScrn->numEntities != 1) return FALSE; drm_mode_setting = i830_kernel_mode_enabled(pScrn); pEnt = xf86GetEntityInfo(pScrn->entityList[0]); if (flags & PROBE_DETECT) return TRUE; /* Allocate driverPrivate */ if (!I830GetRec(pScrn)) return FALSE; pI830 = I830PTR(pScrn); pI830->SaveGeneration = -1; pI830->pEnt = pEnt; pI830->use_drm_mode = drm_mode_setting; pI830->kernel_exec_fencing = pI830->use_drm_mode; if (!I830LoadSyms(pScrn)) return FALSE; if (!drm_mode_setting) { /* Allocate a vgaHWRec */ if (!vgaHWGetHWRec(pScrn)) return FALSE; hwp = VGAHWPTR(pScrn); } pScrn->displayWidth = 640; /* default it */ if (pI830->pEnt->location.type != BUS_PCI) return FALSE; pI830->PciInfo = xf86GetPciInfoForEntity(pI830->pEnt->index); if (!i830_open_drm_master(pScrn)) xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Failed to become DRM master.\n"); pScrn->monitor = pScrn->confScreen->monitor; pScrn->progClock = TRUE; pScrn->rgbBits = 8; flags24 = Support32bppFb | PreferConvert24to32 | SupportConvert24to32; if (!xf86SetDepthBpp(pScrn, 0, 0, 0, flags24)) return FALSE; switch (pScrn->depth) { case 8: case 15: case 16: case 24: break; default: xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Given depth (%d) is not supported by I830 driver\n", pScrn->depth); return FALSE; } xf86PrintDepthBpp(pScrn); if (!xf86SetWeight(pScrn, defaultWeight, defaultWeight)) return FALSE; if (!xf86SetDefaultVisual(pScrn, -1)) return FALSE; if (!pI830->use_drm_mode) hwp = VGAHWPTR(pScrn); pI830->cpp = pScrn->bitsPerPixel / 8; pI830->preinit = TRUE; if (!I830GetEarlyOptions(pScrn)) return FALSE; if (!i830_detect_chipset(pScrn)) return FALSE; i830_check_dri_option(pScrn); if (pI830->use_drm_mode) { if (!I830DrmModeInit(pScrn)) return FALSE; } else { if (i830_bios_init(pScrn)) xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "VBIOS initialization failed.\n"); I830PreInitCrtcConfig(pScrn); if (!i830_user_modesetting_init(pScrn)) return FALSE; } I830XvInit(pScrn); if (!xf86SetGamma(pScrn, zeros)) { PreInitCleanup(pScrn); return FALSE; } if (pScrn->modes == NULL) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No modes.\n"); PreInitCleanup(pScrn); return FALSE; } pScrn->currentMode = pScrn->modes; /* Set display resolution */ xf86SetDpi(pScrn, 0, 0); /* Load the required sub modules */ if (!xf86LoadSubModule(pScrn, "fb")) { PreInitCleanup(pScrn); return FALSE; } if (!pI830->use_drm_mode) { i830CompareRegsToSnapshot(pScrn, "After PreInit"); I830UnmapMMIO(pScrn); /* We won't be using the VGA access after the probe. */ I830SetMMIOAccess(pI830); } /* Load the dri2 module if requested. */ if (xf86ReturnOptValBool(pI830->Options, OPTION_DRI, FALSE) && pI830->directRenderingType != DRI_DISABLED) { xf86LoadSubModule(pScrn, "dri2"); } pI830->preinit = FALSE; return TRUE; } /* * Reset registers that it doesn't make sense to save/restore to a sane state. * This is basically the ring buffer and fence registers. Restoring these * doesn't make sense without restoring GTT mappings. This is something that * whoever gets control next should do. */ static void i830_stop_ring(ScrnInfoPtr pScrn, Bool flush) { I830Ptr pI830 = I830PTR(pScrn); unsigned long temp; DPRINTF(PFX, "ResetState: flush is %s\n", BOOLTOSTRING(flush)); /* Flush the ring buffer, then disable it. */ temp = INREG(LP_RING + RING_LEN); if (temp & RING_VALID) { i830_refresh_ring(pScrn); i830_wait_ring_idle(pScrn); } OUTREG(LP_RING + RING_LEN, 0); OUTREG(LP_RING + RING_HEAD, 0); OUTREG(LP_RING + RING_TAIL, 0); OUTREG(LP_RING + RING_START, 0); } static void i830_start_ring(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); unsigned int itemp; DPRINTF(PFX, "SetRingRegs\n"); OUTREG(LP_RING + RING_LEN, 0); OUTREG(LP_RING + RING_TAIL, 0); OUTREG(LP_RING + RING_HEAD, 0); assert((pI830->ring.mem->offset & I830_RING_START_MASK) == pI830->ring.mem->offset); /* Don't care about the old value. Reserved bits must be zero anyway. */ itemp = pI830->ring.mem->offset; OUTREG(LP_RING + RING_START, itemp); if (((pI830->ring.mem->size - 4096) & I830_RING_NR_PAGES) != pI830->ring.mem->size - 4096) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "I830SetRingRegs: Ring buffer size - 4096 (%lx) violates its " "mask (%x)\n", pI830->ring.mem->size - 4096, I830_RING_NR_PAGES); } /* Don't care about the old value. Reserved bits must be zero anyway. */ itemp = (pI830->ring.mem->size - 4096) & I830_RING_NR_PAGES; itemp |= (RING_NO_REPORT | RING_VALID); OUTREG(LP_RING + RING_LEN, itemp); i830_refresh_ring(pScrn); } void i830_refresh_ring(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); /* If we're reaching RefreshRing as a result of grabbing the DRI lock * before we've set up the ringbuffer, don't bother. */ if (pI830->ring.mem == NULL) return; pI830->ring.head = INREG(LP_RING + RING_HEAD) & I830_HEAD_MASK; pI830->ring.tail = INREG(LP_RING + RING_TAIL); pI830->ring.space = pI830->ring.head - (pI830->ring.tail + 8); if (pI830->ring.space < 0) pI830->ring.space += pI830->ring.mem->size; } enum pipe { PIPE_A = 0, PIPE_B, }; static Bool i830_pipe_enabled(I830Ptr pI830, enum pipe pipe) { if (pipe == PIPE_A) return (INREG(PIPEACONF) & PIPEACONF_ENABLE); else return (INREG(PIPEBCONF) & PIPEBCONF_ENABLE); } static void i830_save_palette(I830Ptr pI830, enum pipe pipe) { int i; if (!i830_pipe_enabled(pI830, pipe)) return; for(i= 0; i < 256; i++) { if (pipe == PIPE_A) pI830->savePaletteA[i] = INREG(PALETTE_A + (i << 2)); else pI830->savePaletteB[i] = INREG(PALETTE_B + (i << 2)); } } static void i830_restore_palette(I830Ptr pI830, enum pipe pipe) { int i; if (!i830_pipe_enabled(pI830, pipe)) return; for(i= 0; i < 256; i++) { if (pipe == PIPE_A) OUTREG(PALETTE_A + (i << 2), pI830->savePaletteA[i]); else OUTREG(PALETTE_B + (i << 2), pI830->savePaletteB[i]); } } static Bool SaveHWState(ScrnInfoPtr pScrn) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830Ptr pI830 = I830PTR(pScrn); vgaHWPtr hwp = VGAHWPTR(pScrn); vgaRegPtr vgaReg = &hwp->SavedReg; int i; if (pI830->fb_compression) { pI830->saveFBC_CFB_BASE = INREG(FBC_CFB_BASE); pI830->saveFBC_LL_BASE = INREG(FBC_LL_BASE); pI830->saveFBC_CONTROL2 = INREG(FBC_CONTROL2); pI830->saveFBC_CONTROL = INREG(FBC_CONTROL); pI830->saveFBC_FENCE_OFF = INREG(FBC_FENCE_OFF); } /* Save video mode information for native mode-setting. */ if (!DSPARB_HWCONTROL(pI830)) pI830->saveDSPARB = INREG(DSPARB); pI830->saveDSPACNTR = INREG(DSPACNTR); pI830->savePIPEACONF = INREG(PIPEACONF); pI830->savePIPEASRC = INREG(PIPEASRC); pI830->saveFPA0 = INREG(FPA0); pI830->saveFPA1 = INREG(FPA1); pI830->saveDPLL_A = INREG(DPLL_A); if (IS_I965G(pI830)) pI830->saveDPLL_A_MD = INREG(DPLL_A_MD); pI830->saveHTOTAL_A = INREG(HTOTAL_A); pI830->saveHBLANK_A = INREG(HBLANK_A); pI830->saveHSYNC_A = INREG(HSYNC_A); pI830->saveVTOTAL_A = INREG(VTOTAL_A); pI830->saveVBLANK_A = INREG(VBLANK_A); pI830->saveVSYNC_A = INREG(VSYNC_A); pI830->saveBCLRPAT_A = INREG(BCLRPAT_A); pI830->saveDSPASTRIDE = INREG(DSPASTRIDE); pI830->saveDSPASIZE = INREG(DSPASIZE); pI830->saveDSPAPOS = INREG(DSPAPOS); pI830->saveDSPABASE = INREG(DSPABASE); i830_save_palette(pI830, PIPE_A); if(xf86_config->num_crtc == 2) { pI830->savePIPEBCONF = INREG(PIPEBCONF); pI830->savePIPEBSRC = INREG(PIPEBSRC); pI830->saveDSPBCNTR = INREG(DSPBCNTR); pI830->saveFPB0 = INREG(FPB0); pI830->saveFPB1 = INREG(FPB1); pI830->saveDPLL_B = INREG(DPLL_B); if (IS_I965G(pI830)) pI830->saveDPLL_B_MD = INREG(DPLL_B_MD); pI830->saveHTOTAL_B = INREG(HTOTAL_B); pI830->saveHBLANK_B = INREG(HBLANK_B); pI830->saveHSYNC_B = INREG(HSYNC_B); pI830->saveVTOTAL_B = INREG(VTOTAL_B); pI830->saveVBLANK_B = INREG(VBLANK_B); pI830->saveVSYNC_B = INREG(VSYNC_B); pI830->saveBCLRPAT_B = INREG(BCLRPAT_B); pI830->saveDSPBSTRIDE = INREG(DSPBSTRIDE); pI830->saveDSPBSIZE = INREG(DSPBSIZE); pI830->saveDSPBPOS = INREG(DSPBPOS); pI830->saveDSPBBASE = INREG(DSPBBASE); i830_save_palette(pI830, PIPE_B); } if (IS_I965G(pI830)) { pI830->saveDSPASURF = INREG(DSPASURF); pI830->saveDSPBSURF = INREG(DSPBSURF); pI830->saveDSPATILEOFF = INREG(DSPATILEOFF); pI830->saveDSPBTILEOFF = INREG(DSPBTILEOFF); } pI830->saveVCLK_DIVISOR_VGA0 = INREG(VCLK_DIVISOR_VGA0); pI830->saveVCLK_DIVISOR_VGA1 = INREG(VCLK_DIVISOR_VGA1); pI830->saveVCLK_POST_DIV = INREG(VCLK_POST_DIV); pI830->saveVGACNTRL = INREG(VGACNTRL); pI830->saveCURSOR_A_CONTROL = INREG(CURSOR_A_CONTROL); pI830->saveCURSOR_A_POSITION = INREG(CURSOR_A_POSITION); pI830->saveCURSOR_A_BASE = INREG(CURSOR_A_BASE); pI830->saveCURSOR_B_CONTROL = INREG(CURSOR_B_CONTROL); pI830->saveCURSOR_B_POSITION = INREG(CURSOR_B_POSITION); pI830->saveCURSOR_B_BASE = INREG(CURSOR_B_BASE); for(i = 0; i < 7; i++) { pI830->saveSWF[i] = INREG(SWF0 + (i << 2)); pI830->saveSWF[i+7] = INREG(SWF00 + (i << 2)); } pI830->saveSWF[14] = INREG(SWF30); pI830->saveSWF[15] = INREG(SWF31); pI830->saveSWF[16] = INREG(SWF32); pI830->saveDSPCLK_GATE_D = INREG(DSPCLK_GATE_D); pI830->saveRENCLK_GATE_D1 = INREG(RENCLK_GATE_D1); if (IS_I965G(pI830)) { pI830->saveRENCLK_GATE_D2 = INREG(RENCLK_GATE_D2); pI830->saveRAMCLK_GATE_D = INREG(RAMCLK_GATE_D); } if (IS_I965GM(pI830) || IS_GM45(pI830)) pI830->savePWRCTXA = INREG(PWRCTXA); if (IS_MOBILE(pI830) && !IS_I830(pI830)) pI830->saveLVDS = INREG(LVDS); pI830->savePFIT_CONTROL = INREG(PFIT_CONTROL); for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; if (output->funcs->save) (*output->funcs->save) (output); } vgaHWUnlock(hwp); vgaHWSave(pScrn, vgaReg, VGA_SR_FONTS); return TRUE; } /* Wait for the PLL to settle down after programming */ static void i830_dpll_settle(void) { usleep(10000); /* 10 ms *should* be plenty */ } static Bool RestoreHWState(ScrnInfoPtr pScrn) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830Ptr pI830 = I830PTR(pScrn); vgaHWPtr hwp = VGAHWPTR(pScrn); vgaRegPtr vgaReg = &hwp->SavedReg; int i; DPRINTF(PFX, "RestoreHWState\n"); /* Disable outputs */ for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; output->funcs->dpms(output, DPMSModeOff); } i830WaitForVblank(pScrn); /* Disable pipes */ for (i = 0; i < xf86_config->num_crtc; i++) { xf86CrtcPtr crtc = xf86_config->crtc[i]; i830_crtc_disable(crtc, TRUE); } i830WaitForVblank(pScrn); if (IS_MOBILE(pI830) && !IS_I830(pI830)) OUTREG(LVDS, pI830->saveLVDS); if (!IS_I830(pI830) && !IS_845G(pI830)) OUTREG(PFIT_CONTROL, pI830->savePFIT_CONTROL); if (!DSPARB_HWCONTROL(pI830)) OUTREG(DSPARB, pI830->saveDSPARB); OUTREG(DSPCLK_GATE_D, pI830->saveDSPCLK_GATE_D); OUTREG(RENCLK_GATE_D1, pI830->saveRENCLK_GATE_D1); if (IS_I965G(pI830)) { OUTREG(RENCLK_GATE_D2, pI830->saveRENCLK_GATE_D2); OUTREG(RAMCLK_GATE_D, pI830->saveRAMCLK_GATE_D); } if (IS_I965GM(pI830) || IS_GM45(pI830)) OUTREG(PWRCTXA, pI830->savePWRCTXA); /* * Pipe regs * To restore the saved state, we first need to program the PLL regs, * followed by the pipe configuration and finally the display plane * configuration. The VGA registers can program one, both or neither * of the PLL regs, depending on their VGA_MOD_DIS bit value. */ /* * Since either or both pipes may use the VGA clocks, make sure the * regs are valid. */ OUTREG(VCLK_DIVISOR_VGA0, pI830->saveVCLK_DIVISOR_VGA0); OUTREG(VCLK_DIVISOR_VGA1, pI830->saveVCLK_DIVISOR_VGA1); OUTREG(VCLK_POST_DIV, pI830->saveVCLK_POST_DIV); /* If the pipe A PLL is active, we can restore the pipe & plane config */ if (pI830->saveDPLL_A & DPLL_VCO_ENABLE) { OUTREG(FPA0, pI830->saveFPA0); OUTREG(DPLL_A, pI830->saveDPLL_A & ~DPLL_VCO_ENABLE); POSTING_READ(DPLL_A); usleep(150); } OUTREG(FPA0, pI830->saveFPA0); OUTREG(FPA1, pI830->saveFPA1); OUTREG(DPLL_A, pI830->saveDPLL_A); POSTING_READ(DPLL_A); i830_dpll_settle(); if (IS_I965G(pI830)) OUTREG(DPLL_A_MD, pI830->saveDPLL_A_MD); else OUTREG(DPLL_A, pI830->saveDPLL_A); POSTING_READ(DPLL_A); i830_dpll_settle(); /* Restore mode config */ OUTREG(HTOTAL_A, pI830->saveHTOTAL_A); OUTREG(HBLANK_A, pI830->saveHBLANK_A); OUTREG(HSYNC_A, pI830->saveHSYNC_A); OUTREG(VTOTAL_A, pI830->saveVTOTAL_A); OUTREG(VBLANK_A, pI830->saveVBLANK_A); OUTREG(VSYNC_A, pI830->saveVSYNC_A); OUTREG(BCLRPAT_A, pI830->saveBCLRPAT_A); OUTREG(DSPASTRIDE, pI830->saveDSPASTRIDE); OUTREG(DSPASIZE, pI830->saveDSPASIZE); OUTREG(DSPAPOS, pI830->saveDSPAPOS); OUTREG(PIPEASRC, pI830->savePIPEASRC); OUTREG(DSPABASE, pI830->saveDSPABASE); if (IS_I965G(pI830)) { OUTREG(DSPASURF, pI830->saveDSPASURF); OUTREG(DSPATILEOFF, pI830->saveDSPATILEOFF); } OUTREG(PIPEACONF, pI830->savePIPEACONF); POSTING_READ(PIPEACONF); i830WaitForVblank(pScrn); /* * Program Pipe A's plane * The corresponding display plane may be disabled, and should only be * enabled if pipe A is actually on (otherwise we have a bug in the initial * state). */ if ((pI830->saveDSPACNTR & DISPPLANE_SEL_PIPE_MASK) == DISPPLANE_SEL_PIPE_A) { OUTREG(DSPACNTR, pI830->saveDSPACNTR); OUTREG(DSPABASE, INREG(DSPABASE)); POSTING_READ(DSPABASE); i830WaitForVblank(pScrn); } if ((pI830->saveDSPBCNTR & DISPPLANE_SEL_PIPE_MASK) == DISPPLANE_SEL_PIPE_A) { OUTREG(DSPBCNTR, pI830->saveDSPBCNTR); OUTREG(DSPBBASE, INREG(DSPBBASE)); POSTING_READ(DSPBBASE); i830WaitForVblank(pScrn); } /* See note about pipe programming above */ if(xf86_config->num_crtc == 2) { /* If the pipe B PLL is active, we can restore the pipe & plane config */ if (pI830->saveDPLL_B & DPLL_VCO_ENABLE) { OUTREG(FPB0, pI830->saveFPB0); OUTREG(DPLL_B, pI830->saveDPLL_B & ~DPLL_VCO_ENABLE); POSTING_READ(DPLL_B); usleep(150); } OUTREG(FPB0, pI830->saveFPB0); OUTREG(FPB1, pI830->saveFPB1); OUTREG(DPLL_B, pI830->saveDPLL_B); POSTING_READ(DPLL_B); i830_dpll_settle(); if (IS_I965G(pI830)) OUTREG(DPLL_B_MD, pI830->saveDPLL_B_MD); else OUTREG(DPLL_B, pI830->saveDPLL_B); POSTING_READ(DPLL_B); i830_dpll_settle(); /* Restore mode config */ OUTREG(HTOTAL_B, pI830->saveHTOTAL_B); OUTREG(HBLANK_B, pI830->saveHBLANK_B); OUTREG(HSYNC_B, pI830->saveHSYNC_B); OUTREG(VTOTAL_B, pI830->saveVTOTAL_B); OUTREG(VBLANK_B, pI830->saveVBLANK_B); OUTREG(VSYNC_B, pI830->saveVSYNC_B); OUTREG(BCLRPAT_B, pI830->saveBCLRPAT_B); OUTREG(DSPBSTRIDE, pI830->saveDSPBSTRIDE); OUTREG(DSPBSIZE, pI830->saveDSPBSIZE); OUTREG(DSPBPOS, pI830->saveDSPBPOS); OUTREG(PIPEBSRC, pI830->savePIPEBSRC); OUTREG(DSPBBASE, pI830->saveDSPBBASE); if (IS_I965G(pI830)) { OUTREG(DSPBSURF, pI830->saveDSPBSURF); OUTREG(DSPBTILEOFF, pI830->saveDSPBTILEOFF); } OUTREG(PIPEBCONF, pI830->savePIPEBCONF); POSTING_READ(PIPEBCONF); i830WaitForVblank(pScrn); /* * Program Pipe B's plane * Note that pipe B may be disabled, and in that case, the plane * should also be disabled or we must have had a bad initial state. */ if ((pI830->saveDSPACNTR & DISPPLANE_SEL_PIPE_MASK) == DISPPLANE_SEL_PIPE_B) { OUTREG(DSPACNTR, pI830->saveDSPACNTR); OUTREG(DSPABASE, INREG(DSPABASE)); i830WaitForVblank(pScrn); } if ((pI830->saveDSPBCNTR & DISPPLANE_SEL_PIPE_MASK) == DISPPLANE_SEL_PIPE_B) { OUTREG(DSPBCNTR, pI830->saveDSPBCNTR); OUTREG(DSPBBASE, INREG(DSPBBASE)); i830WaitForVblank(pScrn); } } OUTREG(VGACNTRL, pI830->saveVGACNTRL); /* * Restore cursors * Even though the X cursor is hidden before we restore the hw state, * we probably only disabled one cursor plane. If we're going from * e.g. plane b to plane a here in RestoreHWState, we need to restore * both cursor plane settings. */ OUTREG(CURSOR_A_POSITION, pI830->saveCURSOR_A_POSITION); OUTREG(CURSOR_A_BASE, pI830->saveCURSOR_A_BASE); OUTREG(CURSOR_A_CONTROL, pI830->saveCURSOR_A_CONTROL); OUTREG(CURSOR_B_POSITION, pI830->saveCURSOR_B_POSITION); OUTREG(CURSOR_B_BASE, pI830->saveCURSOR_B_BASE); OUTREG(CURSOR_B_CONTROL, pI830->saveCURSOR_B_CONTROL); /* Restore outputs */ for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; if (output->funcs->restore) output->funcs->restore(output); } i830_restore_palette(pI830, PIPE_A); i830_restore_palette(pI830, PIPE_B); for(i = 0; i < 7; i++) { OUTREG(SWF0 + (i << 2), pI830->saveSWF[i]); OUTREG(SWF00 + (i << 2), pI830->saveSWF[i+7]); } OUTREG(SWF30, pI830->saveSWF[14]); OUTREG(SWF31, pI830->saveSWF[15]); OUTREG(SWF32, pI830->saveSWF[16]); if (pI830->fb_compression) { OUTREG(FBC_CFB_BASE, pI830->saveFBC_CFB_BASE); OUTREG(FBC_LL_BASE, pI830->saveFBC_LL_BASE); OUTREG(FBC_FENCE_OFF, pI830->saveFBC_FENCE_OFF); OUTREG(FBC_CONTROL2, pI830->saveFBC_CONTROL2); OUTREG(FBC_CONTROL, pI830->saveFBC_CONTROL); } vgaHWRestore(pScrn, vgaReg, VGA_SR_FONTS); vgaHWLock(hwp); return TRUE; } static void I830PointerMoved(int index, int x, int y) { ScrnInfoPtr pScrn = xf86Screens[index]; I830Ptr pI830 = I830PTR(pScrn); int newX = x, newY = y; switch (pI830->rotation) { case RR_Rotate_0: break; case RR_Rotate_90: newX = y; newY = pScrn->pScreen->width - x - 1; break; case RR_Rotate_180: newX = pScrn->pScreen->width - x - 1; newY = pScrn->pScreen->height - y - 1; break; case RR_Rotate_270: newX = pScrn->pScreen->height - y - 1; newY = x; break; } (*pI830->PointerMoved)(index, newX, newY); } /** * Intialiazes the hardware for the 3D pipeline use in the 2D driver. * * Some state caching is performed to avoid redundant state emits. This * function is also responsible for marking the state as clobbered for DRI * clients. */ void IntelEmitInvarientState(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); /* If we've emitted our state since the last clobber by another client, * skip it. */ if (pI830->last_3d != LAST_3D_OTHER) return; if (!IS_I965G(pI830)) { if (IS_I9XX(pI830)) I915EmitInvarientState(pScrn); else I830EmitInvarientState(pScrn); } } static void I830BlockHandler(int i, pointer blockData, pointer pTimeout, pointer pReadmask) { ScreenPtr pScreen = screenInfo.screens[i]; ScrnInfoPtr pScrn = xf86Screens[i]; I830Ptr pI830 = I830PTR(pScrn); pScreen->BlockHandler = pI830->BlockHandler; (*pScreen->BlockHandler) (i, blockData, pTimeout, pReadmask); pI830->BlockHandler = pScreen->BlockHandler; pScreen->BlockHandler = I830BlockHandler; if (pScrn->vtSema) { Bool flushed = FALSE; /* Emit a flush of the rendering cache, or on the 965 and beyond * rendering results may not hit the framebuffer until significantly * later. */ if (pI830->need_mi_flush || pI830->batch_used) { flushed = TRUE; I830EmitFlush(pScrn); } /* Flush the batch, so that any rendering is executed in a timely * fashion. */ intel_batch_flush(pScrn, flushed); if (pI830->have_gem) drmCommandNone(pI830->drmSubFD, DRM_I915_GEM_THROTTLE); pI830->need_mi_flush = FALSE; } i830_uxa_block_handler (pScreen); I830VideoBlockHandler(i, blockData, pTimeout, pReadmask); } static void i830_fixup_mtrrs(ScrnInfoPtr pScrn) { #ifdef HAS_MTRR_SUPPORT I830Ptr pI830 = I830PTR(pScrn); int fd; struct mtrr_gentry gentry; struct mtrr_sentry sentry; if ( ( fd = open ("/proc/mtrr", O_RDONLY, 0) ) != -1 ) { for (gentry.regnum = 0; ioctl (fd, MTRRIOC_GET_ENTRY, &gentry) == 0; ++gentry.regnum) { if (gentry.size < 1) { /* DISABLED */ continue; } /* Check the MTRR range is one we like and if not - remove it. * The Xserver common layer will then setup the right range * for us. */ if (gentry.base == pI830->LinearAddr && gentry.size < pI830->FbMapSize) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Removing bad MTRR range (base 0x%lx, size 0x%x)\n", gentry.base, gentry.size); sentry.base = gentry.base; sentry.size = gentry.size; sentry.type = gentry.type; if (ioctl (fd, MTRRIOC_DEL_ENTRY, &sentry) == -1) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Failed to remove bad MTRR range\n"); } } } close(fd); } #endif } static Bool i830_try_memory_allocation(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); Bool tiled = pI830->tiling; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Attempting memory allocation with %stiled buffers.\n", tiled ? "" : "un"); if (!i830_allocate_2d_memory(pScrn)) goto failed; if (IS_I965GM(pI830) || IS_GM45(pI830)) if (!i830_allocate_pwrctx(pScrn)) goto failed; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "%siled allocation successful.\n", tiled ? "T" : "Unt"); return TRUE; failed: xf86DrvMsg(pScrn->scrnIndex, X_INFO, "%siled allocation failed.\n", tiled ? "T" : "Unt"); return FALSE; } /* * Try to allocate memory in several ways: * 1) If direct rendering is enabled, try to allocate enough memory for tiled * surfaces by rounding up the display width to a tileable one. * 2) If that fails or the allocations themselves fail, try again with untiled * allocations (if this works DRI will stay enabled). * 3) And if all else fails, disable DRI and try just 2D allocations. * 4) Give up and fail ScreenInit. */ static Bool i830_memory_init(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); int savedDisplayWidth = pScrn->displayWidth; Bool tiled = FALSE; tiled = i830_tiled_width(pI830, &pScrn->displayWidth, pI830->cpp); /* Set up our video memory allocator for the chosen videoRam */ if (!i830_allocator_init(pScrn, pScrn->videoRam * KB(1))) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Couldn't initialize video memory allocator\n"); PreInitCleanup(pScrn); return FALSE; } xf86DrvMsg(pScrn->scrnIndex, pI830->pEnt->device->videoRam ? X_CONFIG : X_DEFAULT, "VideoRam: %d KB\n", pScrn->videoRam); /* Tiled first if we got a good displayWidth */ if (tiled) { if (i830_try_memory_allocation(pScrn)) return TRUE; else { i830_reset_allocations(pScrn); pI830->tiling = FALSE; } } /* If tiling fails we have to disable FBC */ pScrn->displayWidth = savedDisplayWidth; if (pI830->fb_compression) xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Couldn't allocate tiled memory, fb compression " "disabled\n"); pI830->fb_compression = FALSE; if (i830_try_memory_allocation(pScrn)) return TRUE; return FALSE; } void i830_init_bufmgr(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); if (pI830->bufmgr) return; if (pI830->have_gem) { int batch_size; batch_size = 4096 * 4; /* The 865 has issues with larger-than-page-sized batch buffers. */ if (IS_I865G(pI830)) batch_size = 4096; pI830->bufmgr = intel_bufmgr_gem_init(pI830->drmSubFD, batch_size); intel_bufmgr_gem_enable_reuse(pI830->bufmgr); } else { assert(pI830->FbBase != NULL); pI830->bufmgr = intel_bufmgr_fake_init(pI830->drmSubFD, pI830->fake_bufmgr_mem->offset, pI830->FbBase + pI830->fake_bufmgr_mem->offset, pI830->fake_bufmgr_mem->size, NULL); } } Bool i830_crtc_on(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830Ptr pI830 = I830PTR(pScrn); if (pI830->use_drm_mode) { int i, active_outputs = 0; /* Kernel manages CRTC status based out output config */ for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; if (output->crtc == crtc && drmmode_output_dpms_status(output) == DPMSModeOn) active_outputs++; } if (active_outputs) return TRUE; return FALSE; } else { I830CrtcPrivatePtr intel_crtc = crtc->driver_private; if (intel_crtc->dpms_mode == DPMSModeOn) return TRUE; return FALSE; } } int i830_crtc_to_pipe(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); int pipe; if (pI830->use_drm_mode) { pipe = drmmode_get_pipe_from_crtc_id(pI830->bufmgr, crtc); } else { I830CrtcPrivatePtr intel_crtc = crtc->driver_private; pipe = intel_crtc->pipe; } return pipe; } static void I830AdjustMemory(ScreenPtr pScreen) { ScrnInfoPtr pScrn; I830Ptr pI830; unsigned long sys_mem; MessageType from; pScrn = xf86Screens[pScreen->myNum]; pI830 = I830PTR(pScrn); /* Limit videoRam to how much we might be able to allocate from AGP */ sys_mem = I830CheckAvailableMemory(pScrn); if (sys_mem == -1) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "/dev/agpgart is either not available, or no memory " "is available\nfor allocation. Please enable agpgart\n."); pScrn->videoRam = pI830->stolen_size / KB(1); } if (sys_mem + (pI830->stolen_size / 1024) < pScrn->videoRam) { pScrn->videoRam = sys_mem + (pI830->stolen_size / 1024); from = X_PROBED; if (sys_mem + (pI830->stolen_size / 1024) < pI830->pEnt->device->videoRam) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "VideoRAM reduced to %d kByte " "(limited to available sysmem)\n", pScrn->videoRam); } } /* Limit video RAM to the actual aperture size */ if (pScrn->videoRam > pI830->FbMapSize / 1024) { pScrn->videoRam = pI830->FbMapSize / 1024; if (pI830->FbMapSize / 1024 < pI830->pEnt->device->videoRam) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "VideoRam reduced to %d kByte (limited to aperture " "size)\n", pScrn->videoRam); } } /* Make sure it's on a page boundary */ if (pScrn->videoRam & 3) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "VideoRam reduced to %d KB " "(page aligned - was %d KB)\n", pScrn->videoRam & ~3, pScrn->videoRam); pScrn->videoRam &= ~3; } if (!IS_I965G(pI830) && pScrn->displayWidth > 2048) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Cannot support DRI with frame buffer width > 2048.\n"); pI830->directRenderingType = DRI_DISABLED; } } static void I830SwapPipes(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); xf86CrtcConfigPtr config; int c; config = XF86_CRTC_CONFIG_PTR(pScrn); /* * If an LVDS display is present, swap the plane/pipe mappings so we can * use FBC on the builtin display. * Note: 965+ chips can compress either plane, so we leave the mapping * alone in that case. * Also make sure the DRM can handle the swap. */ if (I830LVDSPresent(pScrn) && !IS_I965GM(pI830) && !IS_GM45(pI830)) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "adjusting plane->pipe mappings " "to allow for framebuffer compression\n"); for (c = 0; c < config->num_crtc; c++) { xf86CrtcPtr crtc = config->crtc[c]; I830CrtcPrivatePtr intel_crtc = crtc->driver_private; if (intel_crtc->pipe == 0) intel_crtc->plane = 1; else if (intel_crtc->pipe == 1) intel_crtc->plane = 0; } } } static void i830_disable_render_standby(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); uint32_t render_standby; /* Render Standby might cause hang issue, try always disable it.*/ if (IS_I965GM(pI830) || IS_GM45(pI830)) { render_standby = INREG(MCHBAR_RENDER_STANDBY); if (render_standby & RENDER_STANDBY_ENABLE) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Disable render standby.\n"); OUTREG(MCHBAR_RENDER_STANDBY, (render_standby & (~RENDER_STANDBY_ENABLE))); } } } static Bool I830ScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv) { ScrnInfoPtr pScrn; vgaHWPtr hwp = NULL; I830Ptr pI830; VisualPtr visual; MessageType from; pScrn = xf86Screens[pScreen->myNum]; pI830 = I830PTR(pScrn); if (!pI830->use_drm_mode) hwp = VGAHWPTR(pScrn); pScrn->displayWidth = i830_pad_drawable_width(pScrn->virtualX, pI830->cpp); /* * The "VideoRam" config file parameter specifies the maximum amount of * memory that will be used/allocated. When not present, we allow the * driver to allocate as much memory as it wishes to satisfy its * allocations, but if agpgart support isn't available, it gets limited * to the amount of pre-allocated ("stolen") memory. * * Note that in using this value for allocator initialization, we're * limiting aperture allocation to the VideoRam option, rather than limiting * actual memory allocation, so alignment and things will cause less than * VideoRam to be actually used. */ if (pI830->pEnt->device->videoRam == 0) { from = X_DEFAULT; pScrn->videoRam = pI830->FbMapSize / KB(1); } else { #if 0 from = X_CONFIG; pScrn->videoRam = pI830->pEnt->device->videoRam; #else /* Disable VideoRam configuration, at least for now. Previously, * VideoRam was necessary to avoid overly low limits on allocated * memory, so users created larger, yet still small, fixed allocation * limits in their config files. Now, the driver wants to allocate more, * and the old intention of the VideoRam lines that had been entered is * obsolete. */ from = X_DEFAULT; pScrn->videoRam = pI830->FbMapSize / KB(1); if (pScrn->videoRam != pI830->pEnt->device->videoRam) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "VideoRam configuration found, which is no longer " "recommended.\n"); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Continuing with default %dkB VideoRam instead of %d " "kB.\n", pScrn->videoRam, pI830->pEnt->device->videoRam); } #endif } if (pI830->use_drm_mode) { struct pci_device *const device = pI830->PciInfo; int fb_bar = IS_I9XX(pI830) ? 2 : 0; pScrn->videoRam = device->regions[fb_bar].size / 1024; } else { I830AdjustMemory(pScreen); } #ifdef DRI2 if (pI830->directRenderingType == DRI_NONE && I830DRI2ScreenInit(pScreen)) pI830->directRenderingType = DRI_DRI2; #endif /* Enable tiling by default */ pI830->tiling = TRUE; /* Allow user override if they set a value */ if (xf86IsOptionSet(pI830->Options, OPTION_TILING)) { if (xf86ReturnOptValBool(pI830->Options, OPTION_TILING, FALSE)) pI830->tiling = TRUE; else pI830->tiling = FALSE; } /* Enable FB compression if possible */ if (i830_fb_compression_supported(pI830)) pI830->fb_compression = TRUE; else pI830->fb_compression = FALSE; /* Again, allow user override if set */ if (xf86IsOptionSet(pI830->Options, OPTION_FBC)) { if (xf86ReturnOptValBool(pI830->Options, OPTION_FBC, FALSE)) pI830->fb_compression = TRUE; else pI830->fb_compression = FALSE; } if (pI830->use_drm_mode && pI830->fb_compression == TRUE) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Kernel mode setting active, disabling FBC.\n"); pI830->fb_compression = FALSE; } /* SwapBuffers delays to avoid tearing */ pI830->swapbuffers_wait = TRUE; /* Allow user override if they set a value */ if (xf86IsOptionSet(pI830->Options, OPTION_SWAPBUFFERS_WAIT)) { if (xf86ReturnOptValBool(pI830->Options, OPTION_SWAPBUFFERS_WAIT, FALSE)) pI830->swapbuffers_wait = TRUE; else pI830->swapbuffers_wait = FALSE; } xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Framebuffer compression %sabled\n", pI830->fb_compression ? "en" : "dis"); xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Tiling %sabled\n", pI830->tiling ? "en" : "dis"); xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "SwapBuffers wait %sabled\n", pI830->swapbuffers_wait ? "en" : "dis"); pI830->last_3d = LAST_3D_OTHER; pI830->overlayOn = FALSE; /* * Set this so that the overlay allocation is factored in when * appropriate. */ pI830->XvEnabled = TRUE; /* Need MMIO mapped to do GTT lookups during memory allocation. */ if (!pI830->use_drm_mode) I830MapMMIO(pScrn); /* Need FB mapped to access non-GEM objects like * a UMS frame buffer, or the fake bufmgr. */ if (!pI830->use_drm_mode) { if (!I830MapMem(pScrn)) return FALSE; pScrn->memPhysBase = (unsigned long)pI830->FbBase; } if (!i830_memory_init(pScrn)) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Couldn't allocate video memory\n"); return FALSE; } i830_fixup_mtrrs(pScrn); pI830->starting = TRUE; miClearVisualTypes(); if (!miSetVisualTypes(pScrn->depth, miGetDefaultVisualMask(pScrn->depth), pScrn->rgbBits, pScrn->defaultVisual)) return FALSE; if (!miSetPixmapDepths()) return FALSE; if (!pI830->use_drm_mode) { vgaHWSetMmioFuncs(hwp, pI830->MMIOBase, 0); vgaHWGetIOBase(hwp); DPRINTF(PFX, "assert( if(!vgaHWMapMem(pScrn)) )\n"); if (!vgaHWMapMem(pScrn)) return FALSE; } DPRINTF(PFX, "assert( if(!I830EnterVT(scrnIndex, 0)) )\n"); if (pScrn->virtualX > pScrn->displayWidth) pScrn->displayWidth = pScrn->virtualX; /* If the front buffer is not a BO, we need to * set the initial framebuffer pixmap to point at * it */ pScrn->fbOffset = pI830->front_buffer->offset; DPRINTF(PFX, "assert( if(!fbScreenInit(pScreen, ...) )\n"); if (!fbScreenInit(pScreen, pI830->FbBase + pScrn->fbOffset, pScrn->virtualX, pScrn->virtualY, pScrn->xDpi, pScrn->yDpi, pScrn->displayWidth, pScrn->bitsPerPixel)) return FALSE; if (pScrn->bitsPerPixel > 8) { /* Fixup RGB ordering */ visual = pScreen->visuals + pScreen->numVisuals; while (--visual >= pScreen->visuals) { if ((visual->class | DynamicClass) == DirectColor) { visual->offsetRed = pScrn->offset.red; visual->offsetGreen = pScrn->offset.green; visual->offsetBlue = pScrn->offset.blue; visual->redMask = pScrn->mask.red; visual->greenMask = pScrn->mask.green; visual->blueMask = pScrn->mask.blue; } } } fbPictureInit(pScreen, NULL, 0); xf86SetBlackWhitePixels(pScreen); xf86DiDGAInit (pScreen, pI830->LinearAddr + pScrn->fbOffset); if (!I830AccelInit(pScreen)) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Hardware acceleration initialization failed\n"); return FALSE; } if (IS_I965G(pI830)) pI830->batch_flush_notify = i965_batch_flush_notify; else if (IS_I9XX(pI830)) pI830->batch_flush_notify = i915_batch_flush_notify; else pI830->batch_flush_notify = i830_batch_flush_notify; miInitializeBackingStore(pScreen); xf86SetBackingStore(pScreen); xf86SetSilkenMouse(pScreen); miDCInitialize(pScreen, xf86GetPointerScreenFuncs()); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Initializing HW Cursor\n"); if (!I830CursorInit(pScreen)) xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Hardware cursor initialization failed\n"); /* Must force it before EnterVT, so we are in control of VT and * later memory should be bound when allocating, e.g rotate_mem */ pScrn->vtSema = TRUE; if (!I830EnterVT(scrnIndex, 0)) return FALSE; pI830->BlockHandler = pScreen->BlockHandler; pScreen->BlockHandler = I830BlockHandler; pScreen->SaveScreen = xf86SaveScreen; pI830->CloseScreen = pScreen->CloseScreen; pScreen->CloseScreen = I830CloseScreen; pI830->CreateScreenResources = pScreen->CreateScreenResources; pScreen->CreateScreenResources = i830CreateScreenResources; if (!xf86CrtcScreenInit (pScreen)) return FALSE; DPRINTF(PFX, "assert( if(!miCreateDefColormap(pScreen)) )\n"); if (!miCreateDefColormap(pScreen)) return FALSE; DPRINTF(PFX, "assert( if(!xf86HandleColormaps(pScreen, ...)) )\n"); if (!xf86HandleColormaps(pScreen, 256, 8, I830LoadPalette, NULL, CMAP_RELOAD_ON_MODE_SWITCH | CMAP_PALETTED_TRUECOLOR)) { return FALSE; } xf86DPMSInit(pScreen, xf86DPMSSet, 0); #ifdef INTEL_XVMC pI830->XvMCEnabled = FALSE; from = ((pI830->directRenderingType == DRI_DRI2) && xf86GetOptValBool(pI830->Options, OPTION_XVMC, &pI830->XvMCEnabled) ? X_CONFIG : X_DEFAULT); xf86DrvMsg(pScrn->scrnIndex, from, "Intel XvMC decoder %sabled\n", pI830->XvMCEnabled ? "en" : "dis"); #endif /* Init video */ if (pI830->XvEnabled) I830InitVideo(pScreen); /* Setup 3D engine, needed for rotation too */ IntelEmitInvarientState(pScrn); #if defined(DRI2) switch (pI830->directRenderingType) { case DRI_DRI2: pI830->directRenderingOpen = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "direct rendering: DRI2 Enabled\n"); break; case DRI_DISABLED: xf86DrvMsg(pScrn->scrnIndex, X_INFO, "direct rendering: Disabled\n"); break; case DRI_NONE: xf86DrvMsg(pScrn->scrnIndex, X_INFO, "direct rendering: Failed\n"); break; } #else xf86DrvMsg(pScrn->scrnIndex, X_INFO, "direct rendering: Not available\n"); #endif /* Wrap pointer motion to flip touch screen around */ pI830->PointerMoved = pScrn->PointerMoved; pScrn->PointerMoved = I830PointerMoved; if (serverGeneration == 1) xf86ShowUnusedOptions(pScrn->scrnIndex, pScrn->options); pI830->starting = FALSE; pI830->closing = FALSE; pI830->suspended = FALSE; return TRUE; } static void i830AdjustFrame(int scrnIndex, int x, int y, int flags) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(pScrn); I830Ptr pI830 = I830PTR(pScrn); xf86OutputPtr output = config->output[config->compat_output]; xf86CrtcPtr crtc = output->crtc; DPRINTF(PFX, "i830AdjustFrame: y = %d (+ %d), x = %d (+ %d)\n", x, crtc->desiredX, y, crtc->desiredY); if (pI830->use_drm_mode) return; if (crtc && crtc->enabled) { /* Sync the engine before adjust frame */ I830Sync(pScrn); i830PipeSetBase(crtc, crtc->desiredX + x, crtc->desiredY + y); crtc->x = output->initial_x + x; crtc->y = output->initial_y + y; } } static void I830FreeScreen(int scrnIndex, int flags) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; #ifdef INTEL_XVMC I830Ptr pI830 = I830PTR(pScrn); if (pI830 && pI830->XvMCEnabled) intel_xvmc_finish(xf86Screens[scrnIndex]); #endif i830_close_drm_master(pScrn); I830FreeRec(xf86Screens[scrnIndex]); if (xf86LoaderCheckSymbol("vgaHWFreeHWRec")) vgaHWFreeHWRec(xf86Screens[scrnIndex]); } static void I830LeaveVT(int scrnIndex, int flags) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; I830Ptr pI830 = I830PTR(pScrn); int ret; DPRINTF(PFX, "Leave VT\n"); pI830->leaving = TRUE; if (pI830->devicesTimer) TimerFree(pI830->devicesTimer); pI830->devicesTimer = NULL; i830SetHotkeyControl(pScrn, HOTKEY_BIOS_SWITCH); xf86RotateFreeShadow(pScrn); xf86_hide_cursors (pScrn); I830Sync(pScrn); if (!pI830->use_drm_mode) { RestoreHWState(pScrn); /* Evict everything from the bufmgr, as we're about to lose ownership of * the graphics memory. */ if (!pI830->have_gem) { intel_bufmgr_fake_evict_all(pI830->bufmgr); i830_stop_ring(pScrn, TRUE); } if (pI830->debug_modes) { i830CompareRegsToSnapshot(pScrn, "After LeaveVT"); i830DumpRegs (pScrn); } } intel_batch_teardown(pScrn); i830_unbind_all_memory(pScrn); if (pI830->have_gem && !pI830->use_drm_mode) { int ret; /* Tell the kernel to evict all buffer objects and block GTT usage while * we're no longer in control of the chip. */ ret = drmCommandNone(pI830->drmSubFD, DRM_I915_GEM_LEAVEVT); if (ret != 0) FatalError("DRM_I915_LEAVEVT failed: %s\n", strerror(ret)); } if (IS_I965G(pI830)) gen4_render_state_cleanup(pScrn); ret = drmDropMaster(pI830->drmSubFD); if (ret) xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "drmDropMaster failed: %s\n", strerror(errno)); } /* * This gets called when gaining control of the VT, and from ScreenInit(). */ static Bool I830EnterVT(int scrnIndex, int flags) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830Ptr pI830 = I830PTR(pScrn); int i, ret; DPRINTF(PFX, "Enter VT\n"); ret = drmSetMaster(pI830->drmSubFD); if (ret) { if (errno == EINVAL) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "drmSetMaster failed: 2.6.29 or newer kernel required for " "multi-server DRI\n"); } else { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "drmSetMaster failed: %s\n", strerror(errno)); } } /* * Only save state once per server generation since that's what most * drivers do. Could change this to save state at each VT enter. */ if (pI830->SaveGeneration != serverGeneration) { pI830->SaveGeneration = serverGeneration; if (!pI830->use_drm_mode) SaveHWState(pScrn); } /* Get the hardware into a known state if needed */ if (!pI830->use_drm_mode) { I830SwapPipes(pScrn); /* Disable outputs */ for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; output->funcs->dpms(output, DPMSModeOff); } i830WaitForVblank(pScrn); /* Disable pipes */ for (i = 0; i < xf86_config->num_crtc; i++) { xf86CrtcPtr crtc = xf86_config->crtc[i]; i830_crtc_disable(crtc, TRUE); } i830WaitForVblank(pScrn); } pI830->leaving = FALSE; if (!pI830->use_drm_mode) i830_disable_render_standby(pScrn); if (pI830->have_gem && !pI830->use_drm_mode) { int ret; /* Tell the kernel that we're back in control and ready for GTT * usage. */ ret = drmCommandNone(pI830->drmSubFD, DRM_I915_GEM_ENTERVT); if (ret != 0) FatalError("DRM_I915_ENTERVT failed: %s\n", strerror(ret)); } if (!i830_bind_all_memory(pScrn)) return FALSE; i830_describe_allocations(pScrn, 1, ""); intel_batch_init(pScrn); if (IS_I965G(pI830)) gen4_render_state_init(pScrn); if (!pI830->use_drm_mode) { if (i830_check_error_state(pScrn)) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Existing errors found in hardware state.\n"); } /* Re-set up the ring. */ if (!pI830->have_gem) { i830_stop_ring(pScrn, FALSE); i830_start_ring(pScrn); } I830InitHWCursor(pScrn); /* Tell the BIOS that we're in control of mode setting now. */ i830_init_bios_control(pScrn); i830_init_clock_gating(pScrn); if (pI830->power_context) OUTREG(PWRCTXA, pI830->power_context->offset | PWRCTX_EN); /* Clear the framebuffer */ memset(pI830->FbBase + pScrn->fbOffset, 0, pScrn->virtualY * pScrn->displayWidth * pI830->cpp); } if (!xf86SetDesiredModes (pScrn)) return FALSE; if (!pI830->use_drm_mode) { if (pI830->debug_modes) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Hardware state at EnterVT:\n"); i830DumpRegs (pScrn); } i830DescribeOutputConfiguration(pScrn); } /* Set the hotkey to just notify us. We could check its results * periodically and attempt to do something, but it seems like we basically * never get results when we should, and this should all be better handled * through ACPI putting the key events out through evdev and your desktop * environment picking it up. */ i830SetHotkeyControl(pScrn, HOTKEY_DRIVER_NOTIFY); /* Mark 3D state as being clobbered and setup the basics */ pI830->last_3d = LAST_3D_OTHER; IntelEmitInvarientState(pScrn); return TRUE; } static Bool I830SwitchMode(int scrnIndex, DisplayModePtr mode, int flags) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; I830Ptr pI830 = I830PTR(pScrn); return xf86SetSingleMode (pScrn, mode, pI830->rotation); } static Bool I830CloseScreen(int scrnIndex, ScreenPtr pScreen) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; I830Ptr pI830 = I830PTR(pScrn); pI830->closing = TRUE; if (pScrn->vtSema == TRUE) { I830LeaveVT(scrnIndex, 0); } if (pI830->devicesTimer) TimerFree(pI830->devicesTimer); pI830->devicesTimer = NULL; if (!pI830->use_drm_mode) { DPRINTF(PFX, "\nUnmapping memory\n"); I830UnmapMem(pScrn); vgaHWUnmapMem(pScrn); } if (pI830->uxa_driver) { uxa_driver_fini (pScreen); xfree (pI830->uxa_driver); pI830->uxa_driver = NULL; } if (pI830->front_buffer) { i830_set_pixmap_bo(pScreen->GetScreenPixmap(pScreen), NULL); i830_free_memory(pScrn, pI830->front_buffer); pI830->front_buffer = NULL; } xf86_cursors_fini (pScreen); i830_allocator_fini(pScrn); i965_free_video(pScrn); free(pI830->offscreenImages); pI830->offscreenImages = NULL; pScreen->CloseScreen = pI830->CloseScreen; (*pScreen->CloseScreen) (scrnIndex, pScreen); dri_bufmgr_destroy(pI830->bufmgr); pI830->bufmgr = NULL; if (pI830->directRenderingOpen && pI830->directRenderingType == DRI_DRI2) { pI830->directRenderingOpen = FALSE; I830DRI2CloseScreen(pScreen); } xf86GARTCloseScreen(scrnIndex); pScrn->PointerMoved = pI830->PointerMoved; pScrn->vtSema = FALSE; pI830->closing = FALSE; return TRUE; } static ModeStatus I830ValidMode(int scrnIndex, DisplayModePtr mode, Bool verbose, int flags) { if (mode->Flags & V_INTERLACE) { if (verbose) { xf86DrvMsg(scrnIndex, X_PROBED, "Removing interlaced mode \"%s\"\n", mode->name); } return MODE_BAD; } return MODE_OK; } #ifndef SUSPEND_SLEEP #define SUSPEND_SLEEP 0 #endif #ifndef RESUME_SLEEP #define RESUME_SLEEP 0 #endif /* * This function is only required if we need to do anything differently from * DoApmEvent() in common/xf86PM.c, including if we want to see events other * than suspend/resume. */ static Bool I830PMEvent(int scrnIndex, pmEvent event, Bool undo) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; I830Ptr pI830 = I830PTR(pScrn); DPRINTF(PFX, "Enter VT, event %d, undo: %s\n", event, BOOLTOSTRING(undo)); switch(event) { case XF86_APM_SYS_SUSPEND: case XF86_APM_CRITICAL_SUSPEND: /*do we want to delay a critical suspend?*/ case XF86_APM_USER_SUSPEND: case XF86_APM_SYS_STANDBY: case XF86_APM_USER_STANDBY: if (!undo && !pI830->suspended) { pScrn->LeaveVT(scrnIndex, 0); pI830->suspended = TRUE; sleep(SUSPEND_SLEEP); } else if (undo && pI830->suspended) { sleep(RESUME_SLEEP); pScrn->EnterVT(scrnIndex, 0); pI830->suspended = FALSE; } break; case XF86_APM_STANDBY_RESUME: case XF86_APM_NORMAL_RESUME: case XF86_APM_CRITICAL_RESUME: if (pI830->suspended) { sleep(RESUME_SLEEP); pScrn->EnterVT(scrnIndex, 0); pI830->suspended = FALSE; /* * Turn the screen saver off when resuming. This seems to be * needed to stop xscreensaver kicking in (when used). * * XXX DoApmEvent() should probably call this just like * xf86VTSwitch() does. Maybe do it here only in 4.2 * compatibility mode. */ SaveScreens(SCREEN_SAVER_FORCER, ScreenSaverReset); } break; /* This is currently used for ACPI */ case XF86_APM_CAPABILITY_CHANGED: ErrorF("I830PMEvent: Capability change\n"); SaveScreens(SCREEN_SAVER_FORCER, ScreenSaverReset); if (pI830->quirk_flag & QUIRK_RESET_MODES) xf86SetDesiredModes(pScrn); break; default: ErrorF("I830PMEvent: received APM event %d\n", event); } return TRUE; } xf86CrtcPtr i830_pipe_to_crtc(ScrnInfoPtr pScrn, int pipe) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR (pScrn); int c; for (c = 0; c < config->num_crtc; c++) { xf86CrtcPtr crtc = config->crtc[c]; I830CrtcPrivatePtr intel_crtc = crtc->driver_private; if (intel_crtc->pipe == pipe) return crtc; } return NULL; } void I830InitpScrn(ScrnInfoPtr pScrn) { pScrn->PreInit = I830PreInit; pScrn->ScreenInit = I830ScreenInit; pScrn->SwitchMode = I830SwitchMode; pScrn->AdjustFrame = i830AdjustFrame; pScrn->EnterVT = I830EnterVT; pScrn->LeaveVT = I830LeaveVT; pScrn->FreeScreen = I830FreeScreen; pScrn->ValidMode = I830ValidMode; pScrn->PMEvent = I830PMEvent; }