dri: Enable triple-bufferred pageflips

By popular demand.

Triple-buffering trade-offs output latency versus jitter. By having a
pre-rendered frame ready to swap in following a pageflip, we avoid the
scenario where the latency between receiving the flip complete signal
from the kernel, waking up the vsynced application, it render the new
frame and then for the server to process the swap request is greater
than the frame interval, causing us to miss the vblank. The result is
that application can become frame-locked to 30fps. Instead, we report to
the application that the first frame swap is immediately completed,
supply a new back buffer (or else the rendering would be blocked on
waiting for the front-buffer to be swapped away from the scanout) and
let them proceed to render the second frame. The second frame is added
to the swap queue, and the client throttled to vrefresh. (If the client
missed the vblank, the swap queue is empty and the client is immediately
woken again, whilst the pageflip is pending.)

Note, for practical reasons this only applies to page-flipping, for
example, calls to glXSwapBuffer() on fullscreen applications.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

5 files changed, 194 insertions, 102 deletions

diff --git a/man/intel.man b/man/intel.man
index e5e05724..282b9f35 100644
--- a/man/intel.man
+++ b/man/intel.man
@@ -180,6 +180,17 @@ the framerate of applications that render frames at less than refresh rate.
 .IP
 Default: enabled.
 .TP
+.BI "Option \*qTripleBuffer\*q \*q" boolean \*q
+This option enables the use of a third buffer for page-flipping. The third
+buffer allows applications to run at vrefresh rates even if they occasionally
+fail to swapbuffers on time. The effect of such missed swaps is the output
+jitters between 60fps and 30fps, and in the worst case appears frame-locked
+to 30fps. The disadvantage of triple buffering is that there is an extra
+frame of latency, due to the pre-rendered frame sitting in the swap queue,
+between input and any display update.
+.IP
+Default: enabled.
+.TP
 .BI "Option \*qTiling\*q \*q" boolean \*q
 This option controls whether memory buffers for Pixmaps are allocated in tiled mode.  In
 most cases (especially for complex rendering), tiling dramatically improves
diff --git a/src/intel.h b/src/intel.h
index 9d64d30f..6135349f 100644
--- a/src/intel.h
+++ b/src/intel.h
@@ -260,7 +260,7 @@ typedef struct intel_screen_private {
 	unsigned int current_batch;
 
 	void *modes;
-	drm_intel_bo *front_buffer;
+	drm_intel_bo *front_buffer, *back_buffer;
 	long front_pitch, front_tiling;
 	void *shadow_buffer;
 	int shadow_stride;
@@ -423,12 +423,15 @@ typedef struct intel_screen_private {
 	char *deviceName;
 
 	Bool use_pageflipping;
+	Bool use_triple_buffer;
 	Bool force_fallback;
 	Bool can_blt;
 	Bool has_kernel_flush;
 	Bool needs_flush;
 	Bool use_shadow;
 
+	struct _DRI2FrameEvent *pending_flip[2];
+
 	/* Broken-out options. */
 	OptionInfoPtr Options;
 
@@ -465,6 +468,7 @@ extern int intel_output_dpms_status(xf86OutputPtr output);
 
 enum DRI2FrameEventType {
 	DRI2_SWAP,
+	DRI2_SWAP_CHAIN,
 	DRI2_FLIP,
 	DRI2_WAITMSC,
 };
@@ -475,10 +479,13 @@ typedef void (*DRI2SwapEventPtr)(ClientPtr client, void *data, int type,
 #endif
 
 typedef struct _DRI2FrameEvent {
+	struct intel_screen_private *intel;
+
 	XID drawable_id;
 	ClientPtr client;
 	enum DRI2FrameEventType type;
 	int frame;
+	int pipe;
 
 	struct list drawable_resource, client_resource;
 
@@ -487,6 +494,8 @@ typedef struct _DRI2FrameEvent {
 	void *event_data;
 	DRI2BufferPtr front;
 	DRI2BufferPtr back;
+
+	struct _DRI2FrameEvent *chain;
 } DRI2FrameEventRec, *DRI2FrameEventPtr;
 
 extern Bool intel_do_pageflip(intel_screen_private *intel,
diff --git a/src/intel_display.c b/src/intel_display.c
index b55b110f..e75819d4 100644
--- a/src/intel_display.c
+++ b/src/intel_display.c
@@ -1371,6 +1371,11 @@ intel_xf86crtc_resize(ScrnInfoPtr scrn, int width, int height)
 	old_fb_id = mode->fb_id;
 	old_front = intel->front_buffer;
 
+	if (intel->back_buffer) {
+		drm_intel_bo_unreference(intel->back_buffer);
+		intel->back_buffer = NULL;
+	}
+
 	intel->front_buffer = intel_allocate_framebuffer(scrn,
 							 width, height,
 							 intel->cpp,
@@ -1447,6 +1452,8 @@ intel_do_pageflip(intel_screen_private *intel,
 			 new_front->handle, &mode->fb_id))
 		goto error_out;
 
+	intel_batch_submit(scrn);
+
 	/*
 	 * Queue flips on all enabled CRTCs
 	 * Note that if/when we get per-CRTC buffers, we'll have to update this.
diff --git a/src/intel_dri.c b/src/intel_dri.c
index 38d7a6bc..0b284524 100644
--- a/src/intel_dri.c
+++ b/src/intel_dri.c
@@ -732,15 +732,21 @@ i830_dri2_add_frame_event(DRI2FrameEventPtr info)
 }
 
 static void
-i830_dri2_del_frame_event(DRI2FrameEventPtr info)
+i830_dri2_del_frame_event(DrawablePtr drawable, DRI2FrameEventPtr info)
 {
 	list_del(&info->client_resource);
 	list_del(&info->drawable_resource);
+
+	if (info->front)
+		I830DRI2DestroyBuffer(drawable, info->front);
+	if (info->back)
+		I830DRI2DestroyBuffer(drawable, info->back);
+
+	free(info);
 }
 
 static void
-I830DRI2ExchangeBuffers(DrawablePtr draw, DRI2BufferPtr front,
-			DRI2BufferPtr back)
+I830DRI2ExchangeBuffers(DrawablePtr draw, DRI2BufferPtr front, DRI2BufferPtr back)
 {
 	I830DRI2BufferPrivatePtr front_priv, back_priv;
 	struct intel_pixmap *front_intel, *back_intel;
@@ -760,21 +766,19 @@ I830DRI2ExchangeBuffers(DrawablePtr draw, DRI2BufferPtr front,
 	front_intel = intel_get_pixmap_private(front_priv->pixmap);
 	back_intel = intel_get_pixmap_private(back_priv->pixmap);
 	intel_set_pixmap_private(front_priv->pixmap, back_intel);
-	intel_set_pixmap_private(back_priv->pixmap, front_intel); /* should be screen */
+	intel_set_pixmap_private(back_priv->pixmap, front_intel);
 
-	/* Do we need to update the Screen? */
 	screen = draw->pScreen;
 	intel = intel_get_screen_private(xf86Screens[screen->myNum]);
-	if (front_intel->bo == intel->front_buffer) {
+
 	dri_bo_unreference (intel->front_buffer);
 	intel->front_buffer = back_intel->bo;
 	dri_bo_reference (intel->front_buffer);
-	    intel_set_pixmap_private(screen->GetScreenPixmap(screen),
-				     back_intel);
+
+	intel_set_pixmap_private(screen->GetScreenPixmap(screen), back_intel);
 	back_intel->busy = 1;
 	front_intel->busy = -1;
 }
-}
 
 /*
  * Our internal swap routine takes care of actually exchanging, blitting, or
@@ -782,47 +786,79 @@ I830DRI2ExchangeBuffers(DrawablePtr draw, DRI2BufferPtr front,
  */
 static Bool
 I830DRI2ScheduleFlip(struct intel_screen_private *intel,
-		     ClientPtr client, DrawablePtr draw, DRI2BufferPtr front,
-		     DRI2BufferPtr back, DRI2SwapEventPtr func, void *data,
-		     unsigned int target_msc)
+		     DrawablePtr draw,
+		     DRI2FrameEventPtr info)
 {
-	I830DRI2BufferPrivatePtr back_priv;
-	DRI2FrameEventPtr flip_info;
+	I830DRI2BufferPrivatePtr priv = info->back->driverPrivate;
+	drm_intel_bo *new_back, *old_back;
 
-	/* Main crtc for this drawable shall finally deliver pageflip event. */
-	int ref_crtc_hw_id = I830DRI2DrawablePipe(draw);
-
-	flip_info = calloc(1, sizeof(DRI2FrameEventRec));
-	if (!flip_info)
+	if (!intel->use_triple_buffer) {
+		if (!intel_do_pageflip(intel,
+				       intel_get_pixmap_bo(priv->pixmap),
+				       info, info->pipe))
 			return FALSE;
 
-	flip_info->drawable_id = draw->id;
-	flip_info->client = client;
-	flip_info->type = DRI2_SWAP;
-	flip_info->event_complete = func;
-	flip_info->event_data = data;
-	flip_info->frame = target_msc;
+		info->type = DRI2_SWAP;
+		I830DRI2ExchangeBuffers(draw, info->front, info->back);
+		return TRUE;
+	}
+
+	if (intel->pending_flip[info->pipe]) {
+		assert(intel->pending_flip[info->pipe]->chain == NULL);
+		intel->pending_flip[info->pipe]->chain = info;
+		return TRUE;
+	}
 
-	if (!i830_dri2_add_frame_event(flip_info)) {
-	    free(flip_info);
+	if (intel->back_buffer == NULL) {
+		new_back = drm_intel_bo_alloc(intel->bufmgr, "front buffer",
+					      intel->front_buffer->size, 0);
+		if (new_back == NULL)
 			return FALSE;
+
+		if (intel->front_tiling != I915_TILING_NONE) {
+			uint32_t tiling = intel->front_tiling;
+			drm_intel_bo_set_tiling(new_back, &tiling, intel->front_pitch);
+			if (tiling != intel->front_tiling) {
+				drm_intel_bo_unreference(new_back);
+				return FALSE;
+			}
 		}
 
-	/* Page flip the full screen buffer */
-	back_priv = back->driverPrivate;
-	if (intel_do_pageflip(intel,
-			      intel_get_pixmap_bo(back_priv->pixmap),
-			      flip_info, ref_crtc_hw_id))
-		return TRUE;
+		drm_intel_bo_disable_reuse(new_back);
+	} else {
+		new_back = intel->back_buffer;
+		intel->back_buffer = NULL;
+	}
 
-	i830_dri2_del_frame_event(flip_info);
-	free(flip_info);
+	old_back = intel_get_pixmap_bo(priv->pixmap);
+	if (!intel_do_pageflip(intel, old_back, info, info->pipe)) {
+		intel->back_buffer = new_back;
 		return FALSE;
 	}
+	info->type = DRI2_SWAP_CHAIN;
+	intel->pending_flip[info->pipe] = info;
+
+	/* Exchange the current front-buffer with the fresh bo */
+	intel->back_buffer = intel->front_buffer;
+	drm_intel_bo_reference(intel->back_buffer);
+
+	priv = info->front->driverPrivate;
+	intel_set_pixmap_bo(priv->pixmap, new_back);
+	dri_bo_flink(new_back, &info->front->name);
+
+	/* Then flip DRI2 pointers and update the screen pixmap */
+	I830DRI2ExchangeBuffers(draw, info->front, info->back);
+	DRI2SwapComplete(info->client, draw, 0, 0, 0,
+			 DRI2_EXCHANGE_COMPLETE,
+			 info->event_complete,
+			 info->event_data);
+	return TRUE;
+}
 
 static Bool
-can_exchange(DRI2BufferPtr front, DRI2BufferPtr back)
+can_exchange(DrawablePtr drawable, DRI2BufferPtr front, DRI2BufferPtr back)
 {
+	struct intel_screen_private *intel = intel_get_screen_private(xf86Screens[drawable->pScreen->myNum]);
 	I830DRI2BufferPrivatePtr front_priv = front->driverPrivate;
 	I830DRI2BufferPrivatePtr back_priv = back->driverPrivate;
 	PixmapPtr front_pixmap = front_priv->pixmap;
@@ -830,6 +866,18 @@ can_exchange(DRI2BufferPtr front, DRI2BufferPtr back)
 	struct intel_pixmap *front_intel = intel_get_pixmap_private(front_pixmap);
 	struct intel_pixmap *back_intel = intel_get_pixmap_private(back_pixmap);
 
+	if (drawable == NULL)
+		return FALSE;
+
+	if (!DRI2CanFlip(drawable))
+		return FALSE;
+
+	if (intel->shadow_present)
+		return FALSE;
+
+	if (!intel->use_pageflipping)
+		return FALSE;
+
 	if (front_pixmap->drawable.width != back_pixmap->drawable.width)
 		return FALSE;
 
@@ -855,10 +903,8 @@ can_exchange(DRI2BufferPtr front, DRI2BufferPtr back)
 void I830DRI2FrameEventHandler(unsigned int frame, unsigned int tv_sec,
 			       unsigned int tv_usec, DRI2FrameEventPtr swap_info)
 {
+	intel_screen_private *intel = swap_info->intel;
 	DrawablePtr drawable;
-	ScreenPtr screen;
-	ScrnInfoPtr scrn;
-	intel_screen_private *intel;
 	int status;
 
 	if (!swap_info->drawable_id)
@@ -867,41 +913,20 @@ void I830DRI2FrameEventHandler(unsigned int frame, unsigned int tv_sec,
 		status = dixLookupDrawable(&drawable, swap_info->drawable_id, serverClient,
 					   M_ANY, DixWriteAccess);
 	if (status != Success) {
-		i830_dri2_del_frame_event(swap_info);
-		I830DRI2DestroyBuffer(NULL, swap_info->front);
-		I830DRI2DestroyBuffer(NULL, swap_info->back);
-		free(swap_info);
+		i830_dri2_del_frame_event(NULL, swap_info);
 		return;
 	}
 
-	screen = drawable->pScreen;
-	scrn = xf86Screens[screen->myNum];
-	intel = intel_get_screen_private(scrn);
 
 	switch (swap_info->type) {
 	case DRI2_FLIP:
 		/* If we can still flip... */
-		if (DRI2CanFlip(drawable) && !intel->shadow_present &&
-		    intel->use_pageflipping &&
-		    can_exchange(swap_info->front, swap_info->back) &&
-		    I830DRI2ScheduleFlip(intel,
-					 swap_info->client, drawable, swap_info->front,
-					 swap_info->back, swap_info->event_complete,
-					 swap_info->event_data, swap_info->frame)) {
-			I830DRI2ExchangeBuffers(drawable,
-						swap_info->front, swap_info->back);
-			break;
-		}
+		if (can_exchange(drawable, swap_info->front, swap_info->back) &&
+		    I830DRI2ScheduleFlip(intel, drawable, swap_info))
+			return;
+
 		/* else fall through to exchange/blit */
 	case DRI2_SWAP: {
-		int swap_type;
-
-		if (DRI2CanExchange(drawable) && can_exchange(swap_info->front,
-							      swap_info->back)) {
-			I830DRI2ExchangeBuffers(drawable,
-						swap_info->front, swap_info->back);
-			swap_type = DRI2_EXCHANGE_COMPLETE;
-		} else {
 		BoxRec box;
 		RegionRec region;
 
@@ -913,10 +938,8 @@ void I830DRI2FrameEventHandler(unsigned int frame, unsigned int tv_sec,
 
 		I830DRI2CopyRegion(drawable,
 				   &region, swap_info->front, swap_info->back);
-			swap_type = DRI2_BLIT_COMPLETE;
-		}
 		DRI2SwapComplete(swap_info->client, drawable, frame, tv_sec, tv_usec,
-				 swap_type,
+				 DRI2_BLIT_COMPLETE,
 				 swap_info->client ? swap_info->event_complete : NULL,
 				 swap_info->event_data);
 		break;
@@ -927,43 +950,34 @@ void I830DRI2FrameEventHandler(unsigned int frame, unsigned int tv_sec,
 					    frame, tv_sec, tv_usec);
 		break;
 	default:
-		xf86DrvMsg(scrn->scrnIndex, X_WARNING,
+		xf86DrvMsg(intel->scrn->scrnIndex, X_WARNING,
 			   "%s: unknown vblank event received\n", __func__);
 		/* Unknown type */
 		break;
 	}
 
-	i830_dri2_del_frame_event(swap_info);
-	I830DRI2DestroyBuffer(drawable, swap_info->front);
-	I830DRI2DestroyBuffer(drawable, swap_info->back);
-	free(swap_info);
+	i830_dri2_del_frame_event(drawable, swap_info);
 }
 
 void I830DRI2FlipEventHandler(unsigned int frame, unsigned int tv_sec,
 			      unsigned int tv_usec, DRI2FrameEventPtr flip_info)
 {
+	struct intel_screen_private *intel = flip_info->intel;
 	DrawablePtr drawable;
-	ScreenPtr screen;
-	ScrnInfoPtr scrn;
-	int status;
+	DRI2FrameEventPtr chain;
 
-	if (!flip_info->drawable_id)
-		status = BadDrawable;
-	else
-		status = dixLookupDrawable(&drawable, flip_info->drawable_id, serverClient,
+	drawable = NULL;
+	if (flip_info->drawable_id)
+		dixLookupDrawable(&drawable, flip_info->drawable_id, serverClient,
 				  M_ANY, DixWriteAccess);
-	if (status != Success) {
-		i830_dri2_del_frame_event(flip_info);
-		free(flip_info);
-		return;
-	}
 
-	screen = drawable->pScreen;
-	scrn = xf86Screens[screen->myNum];
 
 	/* We assume our flips arrive in order, so we don't check the frame */
 	switch (flip_info->type) {
 	case DRI2_SWAP:
+		if (!drawable)
+			break;
+
 		/* Check for too small vblank count of pageflip completion, taking wraparound
 		 * into account. This usually means some defective kms pageflip completion,
 		 * causing wrong (msc, ust) return values and possible visual corruption.
@@ -975,7 +989,7 @@ void I830DRI2FlipEventHandler(unsigned int frame, unsigned int tv_sec,
 			 * kernels, so make it quieter.
 			 */
 			if (limit) {
-				xf86DrvMsg(scrn->scrnIndex, X_WARNING,
+				xf86DrvMsg(intel->scrn->scrnIndex, X_WARNING,
 					   "%s: Pageflip completion has impossible msc %d < target_msc %d\n",
 					   __func__, frame, flip_info->frame);
 				limit--;
@@ -989,15 +1003,51 @@ void I830DRI2FlipEventHandler(unsigned int frame, unsigned int tv_sec,
 				 DRI2_FLIP_COMPLETE, flip_info->client ? flip_info->event_complete : NULL,
 				 flip_info->event_data);
 		break;
+
+	case DRI2_SWAP_CHAIN:
+		assert(intel->pending_flip[flip_info->pipe] == flip_info);
+		intel->pending_flip[flip_info->pipe] = NULL;
+
+		chain = flip_info->chain;
+		if (chain) {
+			DrawablePtr chain_drawable = NULL;
+			if (chain->drawable_id)
+				 dixLookupDrawable(&chain_drawable,
+						   chain->drawable_id,
+						   serverClient,
+						   M_ANY, DixWriteAccess);
+			if (chain_drawable == NULL) {
+				i830_dri2_del_frame_event(chain_drawable, chain);
+			} else if (!can_exchange(chain_drawable, chain->front, chain->back) ||
+				   !I830DRI2ScheduleFlip(intel, chain_drawable, chain)) {
+				BoxRec box;
+				RegionRec region;
+
+				box.x1 = 0;
+				box.y1 = 0;
+				box.x2 = chain_drawable->width;
+				box.y2 = chain_drawable->height;
+				REGION_INIT(pScreen, &region, &box, 0);
+
+				I830DRI2CopyRegion(chain_drawable, &region,
+						   chain->front, chain->back);
+				DRI2SwapComplete(chain->client, chain_drawable, frame, tv_sec, tv_usec,
+						 DRI2_BLIT_COMPLETE,
+						 chain->client ? chain->event_complete : NULL,
+						 chain->event_data);
+				i830_dri2_del_frame_event(chain_drawable, chain);
+			}
+		}
+		break;
+
 	default:
-		xf86DrvMsg(scrn->scrnIndex, X_WARNING,
+		xf86DrvMsg(intel->scrn->scrnIndex, X_WARNING,
 			   "%s: unknown vblank event received\n", __func__);
 		/* Unknown type */
 		break;
 	}
 
-	i830_dri2_del_frame_event(flip_info);
-	free(flip_info);
+	i830_dri2_del_frame_event(drawable, flip_info);
 }
 
 /*
@@ -1050,12 +1100,14 @@ I830DRI2ScheduleSwap(ClientPtr client, DrawablePtr draw, DRI2BufferPtr front,
 	if (!swap_info)
 	    goto blit_fallback;
 
+	swap_info->intel = intel;
 	swap_info->drawable_id = draw->id;
 	swap_info->client = client;
 	swap_info->event_complete = func;
 	swap_info->event_data = data;
 	swap_info->front = front;
 	swap_info->back = back;
+	swap_info->pipe = I830DRI2DrawablePipe(draw);
 
 	if (!i830_dri2_add_frame_event(swap_info)) {
 	    free(swap_info);
@@ -1082,10 +1134,7 @@ I830DRI2ScheduleSwap(ClientPtr client, DrawablePtr draw, DRI2BufferPtr front,
 	current_msc = vbl.reply.sequence;
 
 	/* Flips need to be submitted one frame before */
-	if (intel->use_pageflipping &&
-	    !intel->shadow_present &&
-	    DRI2CanFlip(draw) &&
-	    can_exchange(front, back)) {
+	if (can_exchange(draw, front, back)) {
 	    swap_type = DRI2_FLIP;
 	    flip = 1;
 	}
@@ -1105,6 +1154,9 @@ I830DRI2ScheduleSwap(ClientPtr client, DrawablePtr draw, DRI2BufferPtr front,
 	 * the swap.
 	 */
 	if (divisor == 0 || current_msc < *target_msc) {
+		if (flip && I830DRI2ScheduleFlip(intel, draw, swap_info))
+			return TRUE;
+
 		vbl.request.type =  DRM_VBLANK_ABSOLUTE | DRM_VBLANK_EVENT;
 		if (pipe > 0)
 			vbl.request.type |= DRM_VBLANK_SECONDARY;
@@ -1197,12 +1249,8 @@ blit_fallback:
 	I830DRI2CopyRegion(draw, &region, front, back);
 
 	DRI2SwapComplete(client, draw, 0, 0, 0, DRI2_BLIT_COMPLETE, func, data);
-	if (swap_info) {
-	    i830_dri2_del_frame_event(swap_info);
-	    I830DRI2DestroyBuffer(draw, swap_info->front);
-	    I830DRI2DestroyBuffer(draw, swap_info->back);
-	    free(swap_info);
-	}
+	if (swap_info)
+	    i830_dri2_del_frame_event(draw, swap_info);
 	*target_msc = 0; /* offscreen, so zero out target vblank count */
 	return TRUE;
 }
@@ -1283,6 +1331,7 @@ I830DRI2ScheduleWaitMSC(ClientPtr client, DrawablePtr draw, CARD64 target_msc,
 	if (!wait_info)
 		goto out_complete;
 
+	wait_info->intel = intel;
 	wait_info->drawable_id = draw->id;
 	wait_info->client = client;
 	wait_info->type = DRI2_WAITMSC;
diff --git a/src/intel_driver.c b/src/intel_driver.c
index 3efc7f40..7fc1c1a3 100644
--- a/src/intel_driver.c
+++ b/src/intel_driver.c
@@ -91,6 +91,7 @@ typedef enum {
    OPTION_TILING_2D,
    OPTION_SHADOW,
    OPTION_SWAPBUFFERS_WAIT,
+   OPTION_TRIPLE_BUFFER,
 #ifdef INTEL_XVMC
    OPTION_XVMC,
 #endif
@@ -111,6 +112,7 @@ static OptionInfoRec I830Options[] = {
    {OPTION_TILING_FB,	"LinearFramebuffer",	OPTV_BOOLEAN,	{0},	FALSE},
    {OPTION_SHADOW,	"Shadow",	OPTV_BOOLEAN,	{0},	FALSE},
    {OPTION_SWAPBUFFERS_WAIT, "SwapbuffersWait", OPTV_BOOLEAN,	{0},	TRUE},
+   {OPTION_TRIPLE_BUFFER, "TripleBuffer", OPTV_BOOLEAN,	{0},	TRUE},
 #ifdef INTEL_XVMC
    {OPTION_XVMC,	"XvMC",		OPTV_BOOLEAN,	{0},	TRUE},
 #endif
@@ -656,6 +658,15 @@ static Bool I830PreInit(ScrnInfoPtr scrn, int flags)
 	intel->swapbuffers_wait = xf86ReturnOptValBool(intel->Options,
 						       OPTION_SWAPBUFFERS_WAIT,
 						       TRUE);
+	xf86DrvMsg(scrn->scrnIndex, X_CONFIG, "Wait on SwapBuffers? %s\n",
+		   intel->swapbuffers_wait ? "enabled" : "disabled");
+
+	intel->use_triple_buffer =
+		xf86ReturnOptValBool(intel->Options,
+				     OPTION_TRIPLE_BUFFER,
+				     TRUE);
+	xf86DrvMsg(scrn->scrnIndex, X_CONFIG, "Triple buffering? %s\n",
+		   intel->use_triple_buffer ? "enabled" : "disabled");
 
 	xf86DrvMsg(scrn->scrnIndex, X_CONFIG, "Framebuffer %s\n",
 		   intel->tiling & INTEL_TILING_FB ? "tiled" : "linear");
@@ -1177,6 +1188,11 @@ static Bool I830CloseScreen(int scrnIndex, ScreenPtr screen)
 		intel->uxa_driver = NULL;
 	}
 
+	if (intel->back_buffer) {
+		drm_intel_bo_unreference(intel->back_buffer);
+		intel->back_buffer = NULL;
+	}
+
 	if (intel->front_buffer) {
 		if (!intel->use_shadow)
 			intel_set_pixmap_bo(screen->GetScreenPixmap(screen),