Update xorg.conf man page & sample for changes in Xorg 1.7

AllowMouseOpenFail description changed to reflect actual behaviour
and point to AllowEmptyInput for previously described behaviour.

Update default DPMS mode timeouts to match new defaults set
in April 2009 by commit d52fddefaeb43f15b677eefbea4a288a9948373b

Update autoloaded module list to match ModuleDefaults in xf86Config.c
Update module subdir list to match stdSubdirs in loadmod.c

Add xorg.conf options that were added to the code:
- XkbDir option added in February 2009
  by commit 76f18b94bd2719a8199334742d021c4d0806187d
- DRI2 option added in April 2008
  by 35982bc109d424c464551ab22ec90af69908c884

Remove xorg.conf options that were removed from the code:
- XkbDisable option was removed in January 2009
  by commit 40877c6680863bd6a8475f2bb0c54df55bcf0b0e
- PciProbe/Config options were removed in August 2008
  by commit fdf7c747a8e1bc59dfb31b7f90dd5eab2687315b
- EstimateSizesAggressively was removed in August 2008
  by commit cd1e8f26147919227e7624ac4c6b313d972a4d35
- loadable font modules were removed in July 2008
  by commit affec10635343668839994ea2bac16c1d4524200
- ModInDev options were removed in December 2008
  by commit 6de6ffff35ac03d49fa61de195d4a0605e0ef8bf

(Also strips some trailing whitespaces to make git happier.)

Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>

3 files changed, 71 insertions, 111 deletions

diff --git a/cpprules.in b/cpprules.in
index 4901ea890..755620005 100644
--- a/cpprules.in
+++ b/cpprules.in
@@ -37,6 +37,8 @@ MANDEFS = \
 	-D__mandir__=$(mandir) \
 	-D__projectroot__=$(prefix) \
 	-D__xconfigfile__=$(__XCONFIGFILE__) -D__xconfigdir__=$(XCONFIGDIR) \
+	-D__xkbdir__=$(XKB_BASE_DIRECTORY) \
+	-D__modulepath__="$(DEFAULT_MODULE_PATH)" \
 	-D__xlogfile__=$(XLOGFILE) -D__xservername__=$(XSERVERNAME) 
 
 .pre:
diff --git a/hw/xfree86/doc/man/xorg.conf.man.pre b/hw/xfree86/doc/man/xorg.conf.man.pre
index 634805a69..d714b2a8e 100644
--- a/hw/xfree86/doc/man/xorg.conf.man.pre
+++ b/hw/xfree86/doc/man/xorg.conf.man.pre
@@ -1,4 +1,3 @@
-.\" $XdotOrg: xserver/xorg/hw/xfree86/doc/man/xorg.conf.man.pre,v 1.7 2006/05/26 00:12:18 reed Exp $
 .\" shorthand for double quote that works everywhere.
 .ds q \N'34'
 .TH __xconfigfile__ __filemansuffix__ __vendorversion__
@@ -96,7 +95,8 @@ is the machine's hostname as reported by
 .PP
 The
 .I __xconfigfile__
-file is composed of a number of sections which may be present in any order.
+file is composed of a number of sections which may be present in any order,
+or omitted to use default configuration values.
 Each section has the form:
 .PP
 .RS 4
@@ -147,21 +147,21 @@ section is no longer recognised.
 .PP
 The
 .B ServerLayout
-sections are at the highest level.  
-They bind together the input and output devices that will be used in a session.  
+sections are at the highest level.
+They bind together the input and output devices that will be used in a session.
 The input devices are described in the
 .B InputDevice
-sections.  
+sections.
 Output devices usually consist of multiple independent components (e.g.,
-a graphics board and a monitor).  
+a graphics board and a monitor).
 These multiple components are bound together in the
 .B Screen
 sections, and it is these that are referenced by the
 .B ServerLayout
-section.  
+section.
 Each
 .B Screen
-section binds together a graphics board and a monitor.  
+section binds together a graphics board and a monitor.
 The graphics boards are described in the
 .B Device
 sections, and the monitors are described in the
@@ -169,15 +169,15 @@ sections, and the monitors are described in the
 sections.
 .PP
 Config file keywords are case\-insensitive, and \(lq_\(rq characters are
-ignored.  
+ignored.
 Most strings (including
 .B Option
 names) are also case-insensitive, and insensitive to white space and
 \(lq_\(rq characters.
 .PP
-Each config file entry usually takes up a single line in the file.  They 
-consist of a keyword, which is possibly followed by one or more arguments, 
-with the number and types of the arguments depending on the keyword.  
+Each config file entry usually takes up a single line in the file.  They
+consist of a keyword, which is possibly followed by one or more arguments,
+with the number and types of the arguments depending on the keyword.
 The argument types are:
 .PP
 .RS 4
@@ -358,23 +358,10 @@ font path elements (which can be set inside a catalogue directory):
 .nf
 .I __projectroot__/lib/X11/fonts/misc/
 .I __projectroot__/lib/X11/fonts/TTF/
+.I __projectroot__/lib/X11/fonts/OTF/
 .I __projectroot__/lib/X11/fonts/Type1/
-.I __projectroot__/lib/X11/fonts/75dpi/
 .I __projectroot__/lib/X11/fonts/100dpi/
-.fi
-.RE
-.PP
-The recommended font path contains the following font path elements:
-.PP
-.RS 4
-.nf
-.I __projectroot__/lib/X11/fonts/local/
-.I __projectroot__/lib/X11/fonts/misc/
-.I __projectroot__/lib/X11/fonts/75dpi/:unscaled
-.I __projectroot__/lib/X11/fonts/100dpi/:unscaled
-.I __projectroot__/lib/X11/fonts/Type1/
 .I __projectroot__/lib/X11/fonts/75dpi/
-.I __projectroot__/lib/X11/fonts/100dpi/
 .fi
 .RE
 .PP
@@ -389,7 +376,11 @@ searches for loadable modules loading in the order specified.
 Multiple
 .B ModulePath
 entries may be specified, and they will be concatenated to build the
-module search path used by the server.
+module search path used by the server.  The default module path is
+.PP
+.RS 11
+__modulepath__
+.RE
 .\" The LogFile keyword is not currently implemented
 .ig
 .TP 7
@@ -406,17 +397,26 @@ where
 .I <n>
 is the display number for the __xservername__ server.
 ..
+.TP 7
+.BI "XkbDir \*q" path \*q
+sets the base directory for keyboard layout files.  The
+.B \-xkbdir
+command line option can be used to override this.  The default directory is
+.PP
+.RS 11
+__xkbdir__
+.RE
 .SH "SERVERFLAGS SECTION"
 In addition to options specific to this section (described below), the
 .B ServerFlags
 section is used to specify some global
-__xservername__ server options.  
+__xservername__ server options.
 All of the entries in this section are
 .BR Options ,
 although for compatibility purposes some of the old style entries are
-still recognised.  
-Those old style entries are not documented here, and using them is 
-discouraged.  
+still recognised.
+Those old style entries are not documented here, and using them is
+discouraged.
 The
 .B ServerFlags
 section is optional, as are the entries that may be specified in it.
@@ -492,8 +492,12 @@ extension) to connect from another host.
 Default: off.
 .TP 7
 .BI "Option \*qAllowMouseOpenFail\*q  \*q" boolean \*q
-This allows the server to start up even if the mouse device can't be
-opened/initialised.
+This tells the mousedrv(__drivermansuffix__) and vmmouse(__drivermansuffix__)
+drivers to not report failure if the mouse device can't be opened/initialised.
+It has no effect on the evdev(__drivermansuffix__) or other drivers.
+The previous functionality of allowing the server to start up even if
+the mouse device can't be opened/initialised is now handled by the
+AllowEmptyInput option.
 Default: false.
 .TP 7
 .BI "Option \*qVTSysReq\*q  \*q" boolean \*q
@@ -508,30 +512,6 @@ keys used for the default VT switch sequence, which means that clients can
 access them.
 Default: off.
 .TP 7
-.BI "Option \*qXkbDisable\*q \*q" boolean \*q
-disable/enable the XKEYBOARD extension.
-The \-kb command line option overrides this config file option.
-Default: XKB is enabled.
-.\" The following four options are "undocumented".
-.ig
-.TP 7
-.BI "Option \*qPciProbe1\*q"
-Use PCI probe method 1.
-Default: set.
-.TP 7
-.BI "Option \*qPciProbe2\*q"
-Use PCI probe method 2.
-Default: not set.
-.TP 7
-.BI "Option \*qPciForceConfig1\*q"
-Force the use PCI config type 1.
-Default: not set.
-.TP 7
-.BI "Option \*qPciForceConfig2\*q"
-Force the use PCI config type 2. 
-Default: not set.
-..
-.TP 7
 .BI "Option \*qBlankTime\*q  \*q" time \*q
 sets the inactivity timeout for the
 .B blank
@@ -551,7 +531,7 @@ phase of DPMS mode.
 .I time
 is in minutes, and the value can be changed at run\-time with
 .BR xset(__appmansuffix__).
-Default: 20 minutes.
+Default: 10 minutes.
 This is only suitable for VESA DPMS compatible monitors, and may not be
 supported by all video drivers.
 It is only enabled for screens that have the
@@ -565,7 +545,7 @@ phase of DPMS mode.
 .I time
 is in minutes, and the value can be changed at run\-time with
 .BR xset(__appmansuffix__).
-Default: 30 minutes.
+Default: 10 minutes.
 This is only suitable for VESA DPMS compatible monitors, and may not be
 supported by all video drivers.
 It is only enabled for screens that have the
@@ -579,7 +559,7 @@ phase of DPMS mode.
 .I time
 is in minutes, and the value can be changed at run\-time with
 .BR xset(__appmansuffix__).
-Default: 40 minutes. 
+Default: 10 minutes.
 This is only suitable for VESA DPMS compatible monitors, and may not be
 supported by all video drivers.
 It is only enabled for screens that have the
@@ -599,13 +579,6 @@ Specify that the machine is a Japanese PC\-98 machine.
 This should not be enabled for anything other than the Japanese\-specific
 PC\-98 architecture.
 Default: auto\-detected.
-.\" Doubt this should be documented.
-.ig
-.TP 7
-.BI "Option \*qEstimateSizesAggressively\*q  \*q" value \*q
-This option affects the way that bus resource sizes are estimated.
-Default: 0.
-..
 .TP 7
 .BI "Option \*qNoPM\*q  \*q" boolean \*q
 Disables something to do with power management events.
@@ -618,6 +591,9 @@ Default is disabled.
 .BI "Option \*qAIGLX\*q \*q" boolean \*q
 enable or disable AIGLX. AIGLX is enabled by default.
 .TP 7
+.BI "Option \*qDRI2\*q \*q" boolean \*q
+enable or disable DRI2. DRI2 is disabled by default.
+.TP 7
 .BI "Option \*qGlxVisuals\*q \*q" string \*q
 This option controls how many GLX visuals the GLX modules sets up.
 The default value is
@@ -667,8 +643,8 @@ The
 .B Module
 section is used to specify which __xservername__ server modules should be loaded.
 This section is ignored when the __xservername__ server is built in static form.
-The types of modules normally loaded in this section are __xservername__ server
-extension modules, and font rasteriser modules.
+The type of modules normally loaded in this section are __xservername__ server
+extension modules.
 Most other module types are loaded automatically when they are needed via
 other mechanisms.
 The
@@ -690,10 +666,10 @@ The standard name is case\-sensitive, and does not include the \(lqlib\(rq
 prefix, or the \(lq.a\(rq, \(lq.o\(rq, or \(lq.so\(rq suffixes.
 .PP
 .RS 7
-Example: the FreeType font rasteriser can be loaded with the following entry:
+Example: the DRI extension module can be loaded with the following entry:
 .PP
 .RS 4
-.B "Load \*qfreetype\*q"
+.B "Load \*qdri\*q"
 .RE
 .RE
 .TP 7
@@ -703,7 +679,7 @@ This instructs the server to not load the module called
 Some modules are loaded by default in the server, and this overrides that
 default. If a
 .B Load
-instruction is given for the same module, it overrides the 
+instruction is given for the same module, it overrides the
 .B Disable
 instruction and the module is loaded. The module name given should be the
 module's standard name, not the module file name. As with the
@@ -733,23 +709,23 @@ disabled by using the following entry:
 .PP
 Modules are searched for in each directory specified in the
 .B ModulePath
-search path, and in the drivers, input, extensions, fonts, and
-internal subdirectories of each of those directories.
+search path, and in the drivers, extensions, input, internal, and
+multimedia subdirectories of each of those directories.
 In addition to this, operating system specific subdirectories of all
 the above are searched first if they exist.
 .PP
-To see what font and extension modules are available, check the contents
-of the following directories:
+To see what extension modules are available, check the contents
+of the following directory:
 .PP
 .RS 4
 .nf
-__projectroot__/lib/modules/fonts
 __projectroot__/lib/modules/extensions
 .fi
 .RE
 .PP
-The \(lqextmod\(rq, \(lqdbe\(rq, \(lqglx\(rq, and \(lqdri\(rq extension
-modules are loaded automatically, unless disabled with \*qDisable\*q entries.
+The \(lqextmod\(rq, \(lqdbe\(rq, \(lqdri\(rq, \(lqdri2\(rq, \(lqglx\(rq,
+and \(lqrecord\(rq extension modules are loaded automatically, if they
+are present, unless disabled with \*qDisable\*q entries.
 It is recommended
 that at very least the \(lqextmod\(rq extension module be loaded.
 If it isn't, some commonly used server extensions (like the SHAPE
@@ -784,7 +760,8 @@ Example: the MIT-SHM extension can be disabled with the following entry:
 The config file may have multiple
 .B InputDevice
 sections.
-There will normally be at least two: one for the core (primary) keyboard,
+If HAL is not being used for input device configuration, there will normally
+be at least two: one for the core (primary) keyboard,
 and one of the core pointer.
 If either of these two is missing, a default configuration for the missing
 ones will be used.
@@ -1157,7 +1134,7 @@ following format:
 
 .B Option \*qMonitor-outputname\*q \*qmonitorsection\*q
 
-(for example, 
+(for example,
 .B Option \*qMonitor-VGA\*q \*qVGA monitor\*q
 for a VGA output)
 .PP
@@ -2108,7 +2085,7 @@ section for a dual headed configuration with two mice:
 .RE
 .SH "DRI SECTION"
 This optional section is used to provide some information for the
-Direct Rendering Infrastructure.  
+Direct Rendering Infrastructure.
 Details about the format of this section
 can be found in the README.DRI document, which is also available on-line at
 .IR <http://dri.freedesktop.org/> .
@@ -2122,7 +2099,7 @@ sections may be present, and they may contain an
 .B Identifier
 entry and multiple
 .B Option
-flags.  
+flags.
 The data therein is not used in this release.
 .PP
 .SH "SEE ALSO"
diff --git a/hw/xfree86/xorgconf.cpp b/hw/xfree86/xorgconf.cpp
index 8ba9ae668..8f0c83014 100644
--- a/hw/xfree86/xorgconf.cpp
+++ b/hw/xfree86/xorgconf.cpp
@@ -73,11 +73,6 @@ XCOMM initialisation of the XFree86-DGA extension within that module.
 	Option	"omit xfree86-dga"
     EndSubSection
 
-XCOMM This loads the Type1 and FreeType font modules
-
-    Load	"type1"
-    Load	"freetype"
-
 EndSection
 
 
@@ -99,8 +94,8 @@ XCOMM events.
 
 XCOMM    Option	"DontVTSwitch"
 
-XCOMM Uncomment this to enable the <Ctrl><Alt><BS> server abort sequence
-XCOMM The default allows clients to receive this key event.
+XCOMM Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
+XCOMM This allows clients to receive this key event.
 
 XCOMM    Option	"DontZap"	"false"
 
@@ -120,28 +115,18 @@ XCOMM Uncomment this to enable the use of a non-local xvidtune client.
 
 XCOMM    Option	"AllowNonLocalXvidtune"
 
-XCOMM Uncomment this to disable dynamically modifying the input device
-XCOMM (mouse and keyboard) settings.
-
-XCOMM    Option	"DisableModInDev"
-
-XCOMM Uncomment this to enable the use of a non-local client to
-XCOMM change the keyboard or mouse settings (currently only xset).
-
-XCOMM    Option	"AllowNonLocalModInDev"
-
 XCOMM Set the basic blanking screen saver timeout.
 
-    Option	"blank time"	"10"	# 10 minutes
+    Option	"BlankTime"	"10"	# 10 minutes
 
 XCOMM Set the DPMS timeouts.  These are set here because they are global
 XCOMM rather than screen-specific.  These settings alone don't enable DPMS.
 XCOMM It is enabled per-screen (or per-monitor), and even then only when
 XCOMM the driver supports it.
 
-    Option	"standby time"	"20"
-    Option	"suspend time"	"30"
-    Option	"off time"	"60"
+    Option	"StandbyTime"	"10"	# 10 minutes
+    Option	"SuspendTime"	"10"	# 10 minutes
+    Option	"OffTime"	"10"	# 10 minutes
 
 EndSection
 
@@ -167,10 +152,6 @@ XCOMM Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
 
 XCOMM    Option	"Xleds"	"1 2 3"
 
-XCOMM To disable the XKEYBOARD extension, uncomment XkbDisable.
-
-XCOMM    Option	"XkbDisable"
-
 XCOMM To customise the XKB settings to suit your keyboard, modify the
 XCOMM lines below (which are the defaults).  For example, for a European
 XCOMM keyboard, you will probably want to use one of:
@@ -395,14 +376,14 @@ Section "Device"
 
 XCOMM The Identifier must be present.
 
-    Identifier	"Generic VGA"
+    Identifier	"Generic VESA"
 
 XCOMM The Driver line must be present.  When using run-time loadable driver
 XCOMM modules, this line instructs the server to load the specified driver
 XCOMM module.  Even when not using loadable driver modules, this line
 XCOMM indicates which driver should interpret the information in this section.
 
-    Driver	"vga"
+    Driver	"vesa"
 
 XCOMM The chipset line is optional in most cases.  It can be used to override
 XCOMM the driver's chipset detection, and should not normally be specified.
@@ -466,7 +447,7 @@ Section "Screen"
 XCOMM The Identifier, Device and Monitor lines must be present
 
     Identifier	"Screen 1"
-    Device	"Generic VGA"
+    Device	"Generic VESA"
     Monitor	"Generic Monitor"
 
 XCOMM The favoured Depth and/or Bpp may be specified here