/* DO NOT EDIT - Generated automatically by script_asm.pl */ static u32 SCRIPT[] = { /* ; Script for the NCR (or symbios) 53c700 and 53c700-66 chip ; ; Copyright (C) 2001 James.Bottomley@HansenPartnership.com ;;----------------------------------------------------------------------------- ;; ;; This program is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2 of the License, or ;; (at your option) any later version. ;; ;; This program is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with this program; if not, write to the Free Software ;; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ;; ;;----------------------------------------------------------------------------- ; ; This script is designed to be modified for the particular command in ; operation. The particular variables pertaining to the commands are: ; ABSOLUTE Device_ID = 0 ; ID of target for command ABSOLUTE MessageCount = 0 ; Number of bytes in message ABSOLUTE MessageLocation = 0 ; Addr of message ABSOLUTE CommandCount = 0 ; Number of bytes in command ABSOLUTE CommandAddress = 0 ; Addr of Command ABSOLUTE StatusAddress = 0 ; Addr to receive status return ABSOLUTE ReceiveMsgAddress = 0 ; Addr to receive msg ; ; This is the magic component for handling scatter-gather. Each of the ; SG components is preceded by a script fragment which moves the ; necessary amount of data and jumps to the next SG segment. The final ; SG segment jumps back to . However, this address is the first SG script ; segment. ; ABSOLUTE SGScriptStartAddress = 0 ; The following represent status interrupts we use 3 hex digits for ; this: 0xPRS where ; P: ABSOLUTE AFTER_SELECTION = 0x100 ABSOLUTE BEFORE_CMD = 0x200 ABSOLUTE AFTER_CMD = 0x300 ABSOLUTE AFTER_STATUS = 0x400 ABSOLUTE AFTER_DATA_IN = 0x500 ABSOLUTE AFTER_DATA_OUT = 0x600 ABSOLUTE DURING_DATA_IN = 0x700 ; R: ABSOLUTE NOT_MSG_OUT = 0x10 ABSOLUTE UNEXPECTED_PHASE = 0x20 ABSOLUTE NOT_MSG_IN = 0x30 ABSOLUTE UNEXPECTED_MSG = 0x40 ABSOLUTE MSG_IN = 0x50 ABSOLUTE SDTR_MSG_R = 0x60 ABSOLUTE REJECT_MSG_R = 0x70 ABSOLUTE DISCONNECT = 0x80 ABSOLUTE MSG_OUT = 0x90 ABSOLUTE WDTR_MSG_R = 0xA0 ; S: ABSOLUTE GOOD_STATUS = 0x1 ; Combinations, since the script assembler can't process | ABSOLUTE NOT_MSG_OUT_AFTER_SELECTION = 0x110 ABSOLUTE UNEXPECTED_PHASE_BEFORE_CMD = 0x220 ABSOLUTE UNEXPECTED_PHASE_AFTER_CMD = 0x320 ABSOLUTE NOT_MSG_IN_AFTER_STATUS = 0x430 ABSOLUTE GOOD_STATUS_AFTER_STATUS = 0x401 ABSOLUTE UNEXPECTED_PHASE_AFTER_DATA_IN = 0x520 ABSOLUTE UNEXPECTED_PHASE_AFTER_DATA_OUT = 0x620 ABSOLUTE UNEXPECTED_MSG_BEFORE_CMD = 0x240 ABSOLUTE MSG_IN_BEFORE_CMD = 0x250 ABSOLUTE MSG_IN_AFTER_CMD = 0x350 ABSOLUTE SDTR_MSG_BEFORE_CMD = 0x260 ABSOLUTE REJECT_MSG_BEFORE_CMD = 0x270 ABSOLUTE DISCONNECT_AFTER_CMD = 0x380 ABSOLUTE SDTR_MSG_AFTER_CMD = 0x360 ABSOLUTE WDTR_MSG_AFTER_CMD = 0x3A0 ABSOLUTE MSG_IN_AFTER_STATUS = 0x440 ABSOLUTE DISCONNECT_AFTER_DATA = 0x580 ABSOLUTE MSG_IN_AFTER_DATA_IN = 0x550 ABSOLUTE MSG_IN_AFTER_DATA_OUT = 0x650 ABSOLUTE MSG_OUT_AFTER_DATA_IN = 0x590 ABSOLUTE DATA_IN_AFTER_DATA_IN = 0x5a0 ABSOLUTE MSG_IN_DURING_DATA_IN = 0x750 ABSOLUTE DISCONNECT_DURING_DATA = 0x780 ; ; Other interrupt conditions ; ABSOLUTE RESELECTED_DURING_SELECTION = 0x1000 ABSOLUTE COMPLETED_SELECTION_AS_TARGET = 0x1001 ABSOLUTE RESELECTION_IDENTIFIED = 0x1003 ; ; Fatal interrupt conditions. If you add to this, also add to the ; array of corresponding messages ; ABSOLUTE FATAL = 0x2000 ABSOLUTE FATAL_UNEXPECTED_RESELECTION_MSG = 0x2000 ABSOLUTE FATAL_SEND_MSG = 0x2001 ABSOLUTE FATAL_NOT_MSG_IN_AFTER_SELECTION = 0x2002 ABSOLUTE FATAL_ILLEGAL_MSG_LENGTH = 0x2003 ABSOLUTE DEBUG_INTERRUPT = 0x3000 ABSOLUTE DEBUG_INTERRUPT1 = 0x3001 ABSOLUTE DEBUG_INTERRUPT2 = 0x3002 ABSOLUTE DEBUG_INTERRUPT3 = 0x3003 ABSOLUTE DEBUG_INTERRUPT4 = 0x3004 ABSOLUTE DEBUG_INTERRUPT5 = 0x3005 ABSOLUTE DEBUG_INTERRUPT6 = 0x3006 ; ; SCSI Messages we interpret in the script ; ABSOLUTE COMMAND_COMPLETE_MSG = 0x00 ABSOLUTE EXTENDED_MSG = 0x01 ABSOLUTE SDTR_MSG = 0x01 ABSOLUTE SAVE_DATA_PTRS_MSG = 0x02 ABSOLUTE RESTORE_DATA_PTRS_MSG = 0x03 ABSOLUTE WDTR_MSG = 0x03 ABSOLUTE DISCONNECT_MSG = 0x04 ABSOLUTE REJECT_MSG = 0x07 ABSOLUTE PARITY_ERROR_MSG = 0x09 ABSOLUTE SIMPLE_TAG_MSG = 0x20 ABSOLUTE IDENTIFY_MSG = 0x80 ABSOLUTE IDENTIFY_MSG_MASK = 0x7F ABSOLUTE TWO_BYTE_MSG = 0x20 ABSOLUTE TWO_BYTE_MSG_MASK = 0x0F ; This is where the script begins ENTRY StartUp StartUp: SELECT ATN Device_ID, Reselect at 0x00000000 : */ 0x41000000,0x00000020, /* JUMP Finish, WHEN STATUS at 0x00000002 : */ 0x830b0000,0x00000460, /* JUMP SendIdentifyMsg, IF MSG_OUT at 0x00000004 : */ 0x860a0000,0x000001b0, /* INT NOT_MSG_OUT_AFTER_SELECTION at 0x00000006 : */ 0x98080000,0x00000110, /* Reselect: WAIT RESELECT SelectedAsTarget at 0x00000008 : */ 0x50000000,0x00000058, /* INT RESELECTED_DURING_SELECTION, WHEN MSG_IN at 0x0000000a : */ 0x9f0b0000,0x00001000, /* INT FATAL_NOT_MSG_IN_AFTER_SELECTION at 0x0000000c : */ 0x98080000,0x00002002, /* ENTRY GetReselectionData GetReselectionData: MOVE 1, ReceiveMsgAddress, WHEN MSG_IN at 0x0000000e : */ 0x0f000001,0x00000000, /* INT RESELECTION_IDENTIFIED at 0x00000010 : */ 0x98080000,0x00001003, /* ENTRY GetReselectionWithTag GetReselectionWithTag: MOVE 3, ReceiveMsgAddress, WHEN MSG_IN at 0x00000012 : */ 0x0f000003,0x00000000, /* INT RESELECTION_IDENTIFIED at 0x00000014 : */ 0x98080000,0x00001003, /* ENTRY SelectedAsTarget SelectedAsTarget: ; Basically tell the selecting device that there's nothing here SET TARGET at 0x00000016 : */ 0x58000200,0x00000000, /* DISCONNECT at 0x00000018 : */ 0x48000000,0x00000000, /* CLEAR TARGET at 0x0000001a : */ 0x60000200,0x00000000, /* INT COMPLETED_SELECTION_AS_TARGET at 0x0000001c : */ 0x98080000,0x00001001, /* ; ; These are the messaging entries ; ; Send a message. Message count should be correctly patched ENTRY SendMessage SendMessage: MOVE MessageCount, MessageLocation, WHEN MSG_OUT at 0x0000001e : */ 0x0e000000,0x00000000, /* ResumeSendMessage: RETURN, WHEN NOT MSG_OUT at 0x00000020 : */ 0x96030000,0x00000000, /* INT FATAL_SEND_MSG at 0x00000022 : */ 0x98080000,0x00002001, /* ENTRY SendMessagePhaseMismatch SendMessagePhaseMismatch: CLEAR ACK at 0x00000024 : */ 0x60000040,0x00000000, /* JUMP ResumeSendMessage at 0x00000026 : */ 0x80080000,0x00000080, /* ; ; Receive a message. Need to identify the message to ; receive it correctly ENTRY ReceiveMessage ReceiveMessage: MOVE 1, ReceiveMsgAddress, WHEN MSG_IN at 0x00000028 : */ 0x0f000001,0x00000000, /* ; ; Use this entry if we've just tried to look at the first byte ; of the message and want to process it further ProcessReceiveMessage: JUMP ReceiveExtendedMessage, IF EXTENDED_MSG at 0x0000002a : */ 0x800c0001,0x000000d0, /* RETURN, IF NOT TWO_BYTE_MSG, AND MASK TWO_BYTE_MSG_MASK at 0x0000002c : */ 0x90040f20,0x00000000, /* CLEAR ACK at 0x0000002e : */ 0x60000040,0x00000000, /* MOVE 1, ReceiveMsgAddress + 1, WHEN MSG_IN at 0x00000030 : */ 0x0f000001,0x00000001, /* RETURN at 0x00000032 : */ 0x90080000,0x00000000, /* ReceiveExtendedMessage: CLEAR ACK at 0x00000034 : */ 0x60000040,0x00000000, /* MOVE 1, ReceiveMsgAddress + 1, WHEN MSG_IN at 0x00000036 : */ 0x0f000001,0x00000001, /* JUMP Receive1Byte, IF 0x01 at 0x00000038 : */ 0x800c0001,0x00000110, /* JUMP Receive2Byte, IF 0x02 at 0x0000003a : */ 0x800c0002,0x00000128, /* JUMP Receive3Byte, IF 0x03 at 0x0000003c : */ 0x800c0003,0x00000140, /* JUMP Receive4Byte, IF 0x04 at 0x0000003e : */ 0x800c0004,0x00000158, /* JUMP Receive5Byte, IF 0x05 at 0x00000040 : */ 0x800c0005,0x00000170, /* INT FATAL_ILLEGAL_MSG_LENGTH at 0x00000042 : */ 0x98080000,0x00002003, /* Receive1Byte: CLEAR ACK at 0x00000044 : */ 0x60000040,0x00000000, /* MOVE 1, ReceiveMsgAddress + 2, WHEN MSG_IN at 0x00000046 : */ 0x0f000001,0x00000002, /* RETURN at 0x00000048 : */ 0x90080000,0x00000000, /* Receive2Byte: CLEAR ACK at 0x0000004a : */ 0x60000040,0x00000000, /* MOVE 2, ReceiveMsgAddress + 2, WHEN MSG_IN at 0x0000004c : */ 0x0f000002,0x00000002, /* RETURN at 0x0000004e : */ 0x90080000,0x00000000, /* Receive3Byte: CLEAR ACK at 0x00000050 : */ 0x60000040,0x00000000, /* MOVE 3, ReceiveMsgAddress + 2, WHEN MSG_IN at 0x00000052 : */ 0x0f000003,0x00000002, /* RETURN at 0x00000054 : */ 0x90080000,0x00000000, /* Receive4Byte: CLEAR ACK at 0x00000056 : */ 0x60000040,0x00000000, /* MOVE 4, ReceiveMsgAddress + 2, WHEN MSG_IN at 0x00000058 : */ 0x0f000004,0x00000002, /* RETURN at 0x0000005a : */ 0x90080000,0x00000000, /* Receive5Byte: CLEAR ACK at 0x0000005c : */ 0x60000040,0x00000000, /* MOVE 5, ReceiveMsgAddress + 2, WHEN MSG_IN at 0x0000005e : */ 0x0f000005,0x00000002, /* RETURN at 0x00000060 : */ 0x90080000,0x00000000, /* ; ; Come here from the message processor to ignore the message ; ENTRY IgnoreMessage IgnoreMessage: CLEAR ACK at 0x00000062 : */ 0x60000040,0x00000000, /* RETURN at 0x00000064 : */ 0x90080000,0x00000000, /* ; ; Come here to send a reply to a message ; ENTRY SendMessageWithATN SendMessageWithATN: SET ATN at 0x00000066 : */ 0x58000008,0x00000000, /* CLEAR ACK at 0x00000068 : */ 0x60000040,0x00000000, /* JUMP SendMessage at 0x0000006a : */ 0x80080000,0x00000078, /* SendIdentifyMsg: CALL SendMessage at 0x0000006c : */ 0x88080000,0x00000078, /* CLEAR ATN at 0x0000006e : */ 0x60000008,0x00000000, /* IgnoreMsgBeforeCommand: CLEAR ACK at 0x00000070 : */ 0x60000040,0x00000000, /* ENTRY SendCommand SendCommand: JUMP Finish, WHEN STATUS at 0x00000072 : */ 0x830b0000,0x00000460, /* JUMP MsgInBeforeCommand, IF MSG_IN at 0x00000074 : */ 0x870a0000,0x000002c0, /* INT UNEXPECTED_PHASE_BEFORE_CMD, IF NOT CMD at 0x00000076 : */ 0x9a020000,0x00000220, /* MOVE CommandCount, CommandAddress, WHEN CMD at 0x00000078 : */ 0x0a000000,0x00000000, /* ResumeSendCommand: JUMP Finish, WHEN STATUS at 0x0000007a : */ 0x830b0000,0x00000460, /* JUMP MsgInAfterCmd, IF MSG_IN at 0x0000007c : */ 0x870a0000,0x00000248, /* JUMP DataIn, IF DATA_IN at 0x0000007e : */ 0x810a0000,0x000002f8, /* JUMP DataOut, IF DATA_OUT at 0x00000080 : */ 0x800a0000,0x00000338, /* INT UNEXPECTED_PHASE_AFTER_CMD at 0x00000082 : */ 0x98080000,0x00000320, /* IgnoreMsgDuringData: CLEAR ACK at 0x00000084 : */ 0x60000040,0x00000000, /* ; fall through to MsgInDuringData Entry MsgInDuringData MsgInDuringData: ; ; Could be we have nothing more to transfer ; JUMP Finish, WHEN STATUS at 0x00000086 : */ 0x830b0000,0x00000460, /* MOVE 1, ReceiveMsgAddress, WHEN MSG_IN at 0x00000088 : */ 0x0f000001,0x00000000, /* JUMP DisconnectDuringDataIn, IF DISCONNECT_MSG at 0x0000008a : */ 0x800c0004,0x00000398, /* JUMP IgnoreMsgDuringData, IF SAVE_DATA_PTRS_MSG at 0x0000008c : */ 0x800c0002,0x00000210, /* JUMP IgnoreMsgDuringData, IF RESTORE_DATA_PTRS_MSG at 0x0000008e : */ 0x800c0003,0x00000210, /* INT MSG_IN_DURING_DATA_IN at 0x00000090 : */ 0x98080000,0x00000750, /* MsgInAfterCmd: MOVE 1, ReceiveMsgAddress, WHEN MSG_IN at 0x00000092 : */ 0x0f000001,0x00000000, /* JUMP DisconnectAfterCmd, IF DISCONNECT_MSG at 0x00000094 : */ 0x800c0004,0x00000298, /* JUMP IgnoreMsgInAfterCmd, IF SAVE_DATA_PTRS_MSG at 0x00000096 : */ 0x800c0002,0x00000288, /* JUMP IgnoreMsgInAfterCmd, IF RESTORE_DATA_PTRS_MSG at 0x00000098 : */ 0x800c0003,0x00000288, /* CALL ProcessReceiveMessage at 0x0000009a : */ 0x88080000,0x000000a8, /* INT MSG_IN_AFTER_CMD at 0x0000009c : */ 0x98080000,0x00000350, /* CLEAR ACK at 0x0000009e : */ 0x60000040,0x00000000, /* JUMP ResumeSendCommand at 0x000000a0 : */ 0x80080000,0x000001e8, /* IgnoreMsgInAfterCmd: CLEAR ACK at 0x000000a2 : */ 0x60000040,0x00000000, /* JUMP ResumeSendCommand at 0x000000a4 : */ 0x80080000,0x000001e8, /* DisconnectAfterCmd: CLEAR ACK at 0x000000a6 : */ 0x60000040,0x00000000, /* WAIT DISCONNECT at 0x000000a8 : */ 0x48000000,0x00000000, /* ENTRY Disconnect1 Disconnect1: INT DISCONNECT_AFTER_CMD at 0x000000aa : */ 0x98080000,0x00000380, /* ENTRY Disconnect2 Disconnect2: ; We return here after a reselection CLEAR ACK at 0x000000ac : */ 0x60000040,0x00000000, /* JUMP ResumeSendCommand at 0x000000ae : */ 0x80080000,0x000001e8, /* MsgInBeforeCommand: MOVE 1, ReceiveMsgAddress, WHEN MSG_IN at 0x000000b0 : */ 0x0f000001,0x00000000, /* JUMP IgnoreMsgBeforeCommand, IF SAVE_DATA_PTRS_MSG at 0x000000b2 : */ 0x800c0002,0x000001c0, /* JUMP IgnoreMsgBeforeCommand, IF RESTORE_DATA_PTRS_MSG at 0x000000b4 : */ 0x800c0003,0x000001c0, /* CALL ProcessReceiveMessage at 0x000000b6 : */ 0x88080000,0x000000a8, /* INT MSG_IN_BEFORE_CMD at 0x000000b8 : */ 0x98080000,0x00000250, /* CLEAR ACK at 0x000000ba : */ 0x60000040,0x00000000, /* JUMP SendCommand at 0x000000bc : */ 0x80080000,0x000001c8, /* DataIn: CALL SGScriptStartAddress at 0x000000be : */ 0x88080000,0x00000000, /* ResumeDataIn: JUMP Finish, WHEN STATUS at 0x000000c0 : */ 0x830b0000,0x00000460, /* JUMP MsgInAfterDataIn, IF MSG_IN at 0x000000c2 : */ 0x870a0000,0x00000358, /* JUMP DataInAfterDataIn, if DATA_IN at 0x000000c4 : */ 0x810a0000,0x00000328, /* INT MSG_OUT_AFTER_DATA_IN, if MSG_OUT at 0x000000c6 : */ 0x9e0a0000,0x00000590, /* INT UNEXPECTED_PHASE_AFTER_DATA_IN at 0x000000c8 : */ 0x98080000,0x00000520, /* DataInAfterDataIn: INT DATA_IN_AFTER_DATA_IN at 0x000000ca : */ 0x98080000,0x000005a0, /* JUMP ResumeDataIn at 0x000000cc : */ 0x80080000,0x00000300, /* DataOut: CALL SGScriptStartAddress at 0x000000ce : */ 0x88080000,0x00000000, /* ResumeDataOut: JUMP Finish, WHEN STATUS at 0x000000d0 : */ 0x830b0000,0x00000460, /* JUMP MsgInAfterDataOut, IF MSG_IN at 0x000000d2 : */ 0x870a0000,0x000003e8, /* INT UNEXPECTED_PHASE_AFTER_DATA_OUT at 0x000000d4 : */ 0x98080000,0x00000620, /* MsgInAfterDataIn: MOVE 1, ReceiveMsgAddress, WHEN MSG_IN at 0x000000d6 : */ 0x0f000001,0x00000000, /* JUMP DisconnectAfterDataIn, IF DISCONNECT_MSG at 0x000000d8 : */ 0x800c0004,0x000003c0, /* JUMP IgnoreMsgAfterData, IF SAVE_DATA_PTRS_MSG at 0x000000da : */ 0x800c0002,0x00000428, /* JUMP IgnoreMsgAfterData, IF RESTORE_DATA_PTRS_MSG at 0x000000dc : */ 0x800c0003,0x00000428, /* CALL ProcessReceiveMessage at 0x000000de : */ 0x88080000,0x000000a8, /* INT MSG_IN_AFTER_DATA_IN at 0x000000e0 : */ 0x98080000,0x00000550, /* CLEAR ACK at 0x000000e2 : */ 0x60000040,0x00000000, /* JUMP ResumeDataIn at 0x000000e4 : */ 0x80080000,0x00000300, /* DisconnectDuringDataIn: CLEAR ACK at 0x000000e6 : */ 0x60000040,0x00000000, /* WAIT DISCONNECT at 0x000000e8 : */ 0x48000000,0x00000000, /* ENTRY Disconnect3 Disconnect3: INT DISCONNECT_DURING_DATA at 0x000000ea : */ 0x98080000,0x00000780, /* ENTRY Disconnect4 Disconnect4: ; we return here after a reselection CLEAR ACK at 0x000000ec : */ 0x60000040,0x00000000, /* JUMP ResumeSendCommand at 0x000000ee : */ 0x80080000,0x000001e8, /* DisconnectAfterDataIn: CLEAR ACK at 0x000000f0 : */ 0x60000040,0x00000000, /* WAIT DISCONNECT at 0x000000f2 : */ 0x48000000,0x00000000, /* ENTRY Disconnect5 Disconnect5: INT DISCONNECT_AFTER_DATA at 0x000000f4 : */ 0x98080000,0x00000580, /* ENTRY Disconnect6 Disconnect6: ; we return here after a reselection CLEAR ACK at 0x000000f6 : */ 0x60000040,0x00000000, /* JUMP ResumeDataIn at 0x000000f8 : */ 0x80080000,0x00000300, /* MsgInAfterDataOut: MOVE 1, ReceiveMsgAddress, WHEN MSG_IN at 0x000000fa : */ 0x0f000001,0x00000000, /* JUMP DisconnectAfterDataOut, if DISCONNECT_MSG at 0x000000fc : */ 0x800c0004,0x00000438, /* JUMP IgnoreMsgAfterData, IF SAVE_DATA_PTRS_MSG at 0x000000fe : */ 0x800c0002,0x00000428, /* JUMP IgnoreMsgAfterData, IF RESTORE_DATA_PTRS_MSG at 0x00000100 : */ 0x800c0003,0x00000428, /* CALL ProcessReceiveMessage at 0x00000102 : */ 0x88080000,0x000000a8, /* INT MSG_IN_AFTER_DATA_OUT at 0x00000104 : */ 0x98080000,0x00000650, /* CLEAR ACK at 0x00000106 : */ 0x60000040,0x00000000, /* JUMP ResumeDataOut at 0x00000108 : */ 0x80080000,0x00000340, /* IgnoreMsgAfterData: CLEAR ACK at 0x0000010a : */ 0x60000040,0x00000000, /* ; Data in and out do the same thing on resume, so pick one JUMP ResumeDataIn at 0x0000010c : */ 0x80080000,0x00000300, /* DisconnectAfterDataOut: CLEAR ACK at 0x0000010e : */ 0x60000040,0x00000000, /* WAIT DISCONNECT at 0x00000110 : */ 0x48000000,0x00000000, /* ENTRY Disconnect7 Disconnect7: INT DISCONNECT_AFTER_DATA at 0x00000112 : */ 0x98080000,0x00000580, /* ENTRY Disconnect8 Disconnect8: ; we return here after a reselection CLEAR ACK at 0x00000114 : */ 0x60000040,0x00000000, /* JUMP ResumeDataOut at 0x00000116 : */ 0x80080000,0x00000340, /* Finish: MOVE 1, StatusAddress, WHEN STATUS at 0x00000118 : */ 0x0b000001,0x00000000, /* INT NOT_MSG_IN_AFTER_STATUS, WHEN NOT MSG_IN at 0x0000011a : */ 0x9f030000,0x00000430, /* MOVE 1, ReceiveMsgAddress, WHEN MSG_IN at 0x0000011c : */ 0x0f000001,0x00000000, /* JUMP FinishCommandComplete, IF COMMAND_COMPLETE_MSG at 0x0000011e : */ 0x800c0000,0x00000490, /* CALL ProcessReceiveMessage at 0x00000120 : */ 0x88080000,0x000000a8, /* INT MSG_IN_AFTER_STATUS at 0x00000122 : */ 0x98080000,0x00000440, /* ENTRY FinishCommandComplete FinishCommandComplete: CLEAR ACK at 0x00000124 : */ 0x60000040,0x00000000, /* WAIT DISCONNECT at 0x00000126 : */ 0x48000000,0x00000000, /* ENTRY Finish1 Finish1: INT GOOD_STATUS_AFTER_STATUS at 0x00000128 : */ 0x98080000,0x00000401, }; #define A_AFTER_CMD 0x00000300 static u32 A_AFTER_CMD_used[] __attribute((unused)) = { }; #define A_AFTER_DATA_IN 0x00000500 static u32 A_AFTER_DATA_IN_used[] __attribute((unused)) = { }; #define A_AFTER_DATA_OUT 0x00000600 static u32 A_AFTER_DATA_OUT_used[] __attribute((unused)) = { }; #define A_AFTER_SELECTION 0x00000100 static u32 A_AFTER_SELECTION_used[] __attribute((unused)) = { }; #define A_AFTER_STATUS 0x00000400 static u32 A_AFTER_STATUS_used[] __attribute((unused)) = { }; #define A_BEFORE_CMD 0x00000200 static u32 A_BEFORE_CMD_used[] __attribute((unused)) = { }; #define A_COMMAND_COMPLETE_MSG 0x00000000 static u32 A_COMMAND_COMPLETE_MSG_used[] __attribute((unused)) = { 0x0000011e, }; #define A_COMPLETED_SELECTION_AS_TARGET 0x00001001 static u32 A_COMPLETED_SELECTION_AS_TARGET_used[] __attribute((unused)) = { 0x0000001d, }; #define A_CommandAddress 0x00000000 static u32 A_CommandAddress_used[] __attribute((unused)) = { 0x00000079, }; #define A_CommandCount 0x00000000 static u32 A_CommandCount_used[] __attribute((unused)) = { 0x00000078, }; #define A_DATA_IN_AFTER_DATA_IN 0x000005a0 static u32 A_DATA_IN_AFTER_DATA_IN_used[] __attribute((unused)) = { 0x000000cb, }; #define A_DEBUG_INTERRUPT 0x00003000 static u32 A_DEBUG_INTERRUPT_used[] __attribute((unused)) = { }; #define A_DEBUG_INTERRUPT1 0x00003001 static u32 A_DEBUG_INTERRUPT1_used[] __attribute((unused)) = { }; #define A_DEBUG_INTERRUPT2 0x00003002 static u32 A_DEBUG_INTERRUPT2_used[] __attribute((unused)) = { }; #define A_DEBUG_INTERRUPT3 0x00003003 static u32 A_DEBUG_INTERRUPT3_used[] __attribute((unused)) = { }; #define A_DEBUG_INTERRUPT4 0x00003004 static u32 A_DEBUG_INTERRUPT4_used[] __attribute((unused)) = { }; #define A_DEBUG_INTERRUPT5 0x00003005 static u32 A_DEBUG_INTERRUPT5_used[] __attribute((unused)) = { }; #define A_DEBUG_INTERRUPT6 0x00003006 static u32 A_DEBUG_INTERRUPT6_used[] __attribute((unused)) = { }; #define A_DISCONNECT 0x00000080 static u32 A_DISCONNECT_used[] __attribute((unused)) = { }; #define A_DISCONNECT_AFTER_CMD 0x00000380 static u32 A_DISCONNECT_AFTER_CMD_used[] __attribute((unused)) = { 0x000000ab, }; #define A_DISCONNECT_AFTER_DATA 0x00000580 static u32 A_DISCONNECT_AFTER_DATA_used[] __attribute((unused)) = { 0x000000f5, 0x00000113, }; #define A_DISCONNECT_DURING_DATA 0x00000780 static u32 A_DISCONNECT_DURING_DATA_used[] __attribute((unused)) = { 0x000000eb, }; #define A_DISCONNECT_MSG 0x00000004 static u32 A_DISCONNECT_MSG_used[] __attribute((unused)) = { 0x0000008a, 0x00000094, 0x000000d8, 0x000000fc, }; #define A_DURING_DATA_IN 0x00000700 static u32 A_DURING_DATA_IN_used[] __attribute((unused)) = { }; #define A_Device_ID 0x00000000 static u32 A_Device_ID_used[] __attribute((unused)) = { 0x00000000, }; #define A_EXTENDED_MSG 0x00000001 static u32 A_EXTENDED_MSG_used[] __attribute((unused)) = { 0x0000002a, }; #define A_FATAL 0x00002000 static u32 A_FATAL_used[] __attribute((unused)) = { }; #define A_FATAL_ILLEGAL_MSG_LENGTH 0x00002003 static u32 A_FATAL_ILLEGAL_MSG_LENGTH_used[] __attribute((unused)) = { 0x00000043, }; #define A_FATAL_NOT_MSG_IN_AFTER_SELECTION 0x00002002 static u32 A_FATAL_NOT_MSG_IN_AFTER_SELECTION_used[] __attribute((unused)) = { 0x0000000d, }; #define A_FATAL_SEND_MSG 0x00002001 static u32 A_FATAL_SEND_MSG_used[] __attribute((unused)) = { 0x00000023, }; #define A_FATAL_UNEXPECTED_RESELECTION_MSG 0x00002000 static u32 A_FATAL_UNEXPECTED_RESELECTION_MSG_used[] __attribute((unused)) = { }; #define A_GOOD_STATUS 0x00000001 static u32 A_GOOD_STATUS_used[] __attribute((unused)) = { }; #define A_GOOD_STATUS_AFTER_STATUS 0x00000401 static u32 A_GOOD_STATUS_AFTER_STATUS_used[] __attribute((unused)) = { 0x00000129, }; #define A_IDENTIFY_MSG 0x00000080 static u32 A_IDENTIFY_MSG_used[] __attribute((unused)) = { }; #define A_IDENTIFY_MSG_MASK 0x0000007f static u32 A_IDENTIFY_MSG_MASK_used[] __attribute((unused)) = { }; #define A_MSG_IN 0x00000050 static u32 A_MSG_IN_used[] __attribute((unused)) = { }; #define A_MSG_IN_AFTER_CMD 0x00000350 static u32 A_MSG_IN_AFTER_CMD_used[] __attribute((unused)) = { 0x0000009d, }; #define A_MSG_IN_AFTER_DATA_IN 0x00000550 static u32 A_MSG_IN_AFTER_DATA_IN_used[] __attribute((unused)) = { 0x000000e1, }; #define A_MSG_IN_AFTER_DATA_OUT 0x00000650 static u32 A_MSG_IN_AFTER_DATA_OUT_used[] __attribute((unused)) = { 0x00000105, }; #define A_MSG_IN_AFTER_STATUS 0x00000440 static u32 A_MSG_IN_AFTER_STATUS_used[] __attribute((unused)) = { 0x00000123, }; #define A_MSG_IN_BEFORE_CMD 0x00000250 static u32 A_MSG_IN_BEFORE_CMD_used[] __attribute((unused)) = { 0x000000b9, }; #define A_MSG_IN_DURING_DATA_IN 0x00000750 static u32 A_MSG_IN_DURING_DATA_IN_used[] __attribute((unused)) = { 0x00000091, }; #define A_MSG_OUT 0x00000090 static u32 A_MSG_OUT_used[] __attribute((unused)) = { }; #define A_MSG_OUT_AFTER_DATA_IN 0x00000590 static u32 A_MSG_OUT_AFTER_DATA_IN_used[] __attribute((unused)) = { 0x000000c7, }; #define A_MessageCount 0x00000000 static u32 A_MessageCount_used[] __attribute((unused)) = { 0x0000001e, }; #define A_MessageLocation 0x00000000 static u32 A_MessageLocation_used[] __attribute((unused)) = { 0x0000001f, }; #define A_NOT_MSG_IN 0x00000030 static u32 A_NOT_MSG_IN_used[] __attribute((unused)) = { }; #define A_NOT_MSG_IN_AFTER_STATUS 0x00000430 static u32 A_NOT_MSG_IN_AFTER_STATUS_used[] __attribute((unused)) = { 0x0000011b, }; #define A_NOT_MSG_OUT 0x00000010 static u32 A_NOT_MSG_OUT_used[] __attribute((unused)) = { }; #define A_NOT_MSG_OUT_AFTER_SELECTION 0x00000110 static u32 A_NOT_MSG_OUT_AFTER_SELECTION_used[] __attribute((unused)) = { 0x00000007, }; #define A_PARITY_ERROR_MSG 0x00000009 static u32 A_PARITY_ERROR_MSG_used[] __attribute((unused)) = { }; #define A_REJECT_MSG 0x00000007 static u32 A_REJECT_MSG_used[] __attribute((unused)) = { }; #define A_REJECT_MSG_BEFORE_CMD 0x00000270 static u32 A_REJECT_MSG_BEFORE_CMD_used[] __attribute((unused)) = { }; #define A_REJECT_MSG_R 0x00000070 static u32 A_REJECT_MSG_R_used[] __attribute((unused)) = { }; #define A_RESELECTED_DURING_SELECTION 0x00001000 static u32 A_RESELECTED_DURING_SELECTION_used[] __attribute((unused)) = { 0x0000000b, }; #define A_RESELECTION_IDENTIFIED 0x00001003 static u32 A_RESELECTION_IDENTIFIED_used[] __attribute((unused)) = { 0x00000011, 0x00000015, }; #define A_RESTORE_DATA_PTRS_MSG 0x00000003 static u32 A_RESTORE_DATA_PTRS_MSG_used[] __attribute((unused)) = { 0x0000008e, 0x00000098, 0x000000b4, 0x000000dc, 0x00000100, }; #define A_ReceiveMsgAddress 0x00000000 static u32 A_ReceiveMsgAddress_used[] __attribute((unused)) = { 0x0000000f, 0x00000013, 0x00000029, 0x00000031, 0x00000037, 0x00000047, 0x0000004d, 0x00000053, 0x00000059, 0x0000005f, 0x00000089, 0x00000093, 0x000000b1, 0x000000d7, 0x000000fb, 0x0000011d, }; #define A_SAVE_DATA_PTRS_MSG 0x00000002 static u32 A_SAVE_DATA_PTRS_MSG_used[] __attribute((unused)) = { 0x0000008c, 0x00000096, 0x000000b2, 0x000000da, 0x000000fe, }; #define A_SDTR_MSG 0x00000001 static u32 A_SDTR_MSG_used[] __attribute((unused)) = { }; #define A_SDTR_MSG_AFTER_CMD 0x00000360 static u32 A_SDTR_MSG_AFTER_CMD_used[] __attribute((unused)) = { }; #define A_SDTR_MSG_BEFORE_CMD 0x00000260 static u32 A_SDTR_MSG_BEFORE_CMD_used[] __attribute((unused)) = { }; #define A_SDTR_MSG_R 0x00000060 static u32 A_SDTR_MSG_R_used[] __attribute((unused)) = { }; #define A_SGScriptStartAddress 0x00000000 static u32 A_SGScriptStartAddress_used[] __attribute((unused)) = { 0x000000bf, 0x000000cf, }; #define A_SIMPLE_TAG_MSG 0x00000020 static u32 A_SIMPLE_TAG_MSG_used[] __attribute((unused)) = { }; #define A_StatusAddress 0x00000000 static u32 A_StatusAddress_used[] __attribute((unused)) = { 0x00000119, }; #define A_TWO_BYTE_MSG 0x00000020 static u32 A_TWO_BYTE_MSG_used[] __attribute((unused)) = { 0x0000002c, }; #define A_TWO_BYTE_MSG_MASK 0x0000000f static u32 A_TWO_BYTE_MSG_MASK_used[] __attribute((unused)) = { 0x0000002c, }; #define A_UNEXPECTED_MSG 0x00000040 static u32 A_UNEXPECTED_MSG_used[] __attribute((unused)) = { }; #define A_UNEXPECTED_MSG_BEFORE_CMD 0x00000240 static u32 A_UNEXPECTED_MSG_BEFORE_CMD_used[] __attribute((unused)) = { }; #define A_UNEXPECTED_PHASE 0x00000020 static u32 A_UNEXPECTED_PHASE_used[] __attribute((unused)) = { }; #define A_UNEXPECTED_PHASE_AFTER_CMD 0x00000320 static u32 A_UNEXPECTED_PHASE_AFTER_CMD_used[] __attribute((unused)) = { 0x00000083, }; #define A_UNEXPECTED_PHASE_AFTER_DATA_IN 0x00000520 static u32 A_UNEXPECTED_PHASE_AFTER_DATA_IN_used[] __attribute((unused)) = { 0x000000c9, }; #define A_UNEXPECTED_PHASE_AFTER_DATA_OUT 0x00000620 static u32 A_UNEXPECTED_PHASE_AFTER_DATA_OUT_used[] __attribute((unused)) = { 0x000000d5, }; #define A_UNEXPECTED_PHASE_BEFORE_CMD 0x00000220 static u32 A_UNEXPECTED_PHASE_BEFORE_CMD_used[] __attribute((unused)) = { 0x00000077, }; #define A_WDTR_MSG 0x00000003 static u32 A_WDTR_MSG_used[] __attribute((unused)) = { }; #define A_WDTR_MSG_AFTER_CMD 0x000003a0 static u32 A_WDTR_MSG_AFTER_CMD_used[] __attribute((unused)) = { }; #define A_WDTR_MSG_R 0x000000a0 static u32 A_WDTR_MSG_R_used[] __attribute((unused)) = { }; #define Ent_Disconnect1 0x000002a8 #define Ent_Disconnect2 0x000002b0 #define Ent_Disconnect3 0x000003a8 #define Ent_Disconnect4 0x000003b0 #define Ent_Disconnect5 0x000003d0 #define Ent_Disconnect6 0x000003d8 #define Ent_Disconnect7 0x00000448 #define Ent_Disconnect8 0x00000450 #define Ent_Finish1 0x000004a0 #define Ent_Finish2 0x000004a8 #define Ent_FinishCommandComplete 0x00000490 #define Ent_GetReselectionData 0x00000038 #define Ent_GetReselectionWithTag 0x00000048 #define Ent_IgnoreMessage 0x00000188 #define Ent_MsgInDuringData 0x00000218 #define Ent_ReceiveMessage 0x000000a0 #define Ent_SelectedAsTarget 0x00000058 #define Ent_SendCommand 0x000001c8 #define Ent_SendMessage 0x00000078 #define Ent_SendMessagePhaseMismatch 0x00000090 #define Ent_SendMessageWithATN 0x00000198 #define Ent_StartUp 0x00000000 static u32 LABELPATCHES[] __attribute((unused)) = { 0x00000001, 0x00000003, 0x00000005, 0x00000009, 0x00000027, 0x0000002b, 0x00000039, 0x0000003b, 0x0000003d, 0x0000003f, 0x00000041, 0x0000006b, 0x0000006d, 0x00000073, 0x00000075, 0x0000007b, 0x0000007d, 0x0000007f, 0x00000081, 0x00000087, 0x0000008b, 0x0000008d, 0x0000008f, 0x00000095, 0x00000097, 0x00000099, 0x0000009b, 0x000000a1, 0x000000a5, 0x000000af, 0x000000b3, 0x000000b5, 0x000000b7, 0x000000bd, 0x000000c1, 0x000000c3, 0x000000c5, 0x000000cd, 0x000000d1, 0x000000d3, 0x000000d9, 0x000000db, 0x000000dd, 0x000000df, 0x000000e5, 0x000000ef, 0x000000f9, 0x000000fd, 0x000000ff, 0x00000101, 0x00000103, 0x00000109, 0x0000010d, 0x00000117, 0x0000011f, 0x00000121, }; static struct { u32 offset; void *address; } EXTERNAL_PATCHES[] __attribute((unused)) = { }; static u32 INSTRUCTIONS __attribute((unused)) = 149; static u32 PATCHES __attribute((unused)) = 56; static u32 EXTERNAL_PATCHES_LEN __attribute((unused)) = 0;