diff options
Diffstat (limited to 'testautomation/global/tools/includes/required/t_doc2.inc')
| -rwxr-xr-x | testautomation/global/tools/includes/required/t_doc2.inc | 387 |
1 files changed, 387 insertions, 0 deletions
diff --git a/testautomation/global/tools/includes/required/t_doc2.inc b/testautomation/global/tools/includes/required/t_doc2.inc new file mode 100755 index 000000000000..4192563b0eba --- /dev/null +++ b/testautomation/global/tools/includes/required/t_doc2.inc @@ -0,0 +1,387 @@ +'encoding UTF-8 Do not remove or change this line! +'************************************************************************** +' DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. +' +' Copyright 2000, 2010 Oracle and/or its affiliates. +' +' OpenOffice.org - a multi-platform office productivity suite +' +' This file is part of OpenOffice.org. +' +' OpenOffice.org is free software: you can redistribute it and/or modify +' it under the terms of the GNU Lesser General Public License version 3 +' only, as published by the Free Software Foundation. +' +' OpenOffice.org is distributed in the hope that it will be useful, +' but WITHOUT ANY WARRANTY; without even the implied warranty of +' MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +' GNU Lesser General Public License version 3 for more details +' (a copy is included in the LICENSE file that accompanied this code). +' +' You should have received a copy of the GNU Lesser General Public License +' version 3 along with OpenOffice.org. If not, see +' <http://www.openoffice.org/license.html> +' for a copy of the LGPLv3 License. +' +'/************************************************************************ +'* +'* owner : thorsten.bosbach@oracle.com +'* +'* short description : Global Routines for Document Handling; Part two +'* +'\*********************************************************************** + +sub hTabelleEinfuegen + '/// <b>WRITER only </b>///' + '/// hTabelleEinfuegen hInsertTable ///' + '/// insert a dummy table in writer/writerweb/masterdocument ///' + TableInsertTable + + Kontext "TabelleEinfuegenWriter" + if ( TabelleEinfuegenWriter.exists( 2 ) ) then + + hCloseDialog( TabelleEinfuegenWriter, "ok" ) + + Kontext "TableObjectbar" + if ( TableObjectbar.exists( 1 ) ) then + ' We are happy then, do nothing + else + Kontext "TextObjectbar" + TextObjectbar.SetNextToolBox + end if + + select case ( gApplication ) + Case "WRITER" : Kontext "DocumentWriter" + Case "MASTERDOCUMENT" : Kontext "DocumentMasterDoc" + Case "HTML" : Kontext "DocumentWriterWeb" + end select + else + warnlog( "hTabelleEinfuegen: Failed to open <TabelleEinfuegenWriter> dialog" ) + endif + +end sub +' +'------------------------------------------------------------------------------- +' +sub ZellenMarkieren ( Down%, Right% ) + '/// <b>CALC only</b> ///' + '/// ZellenMarkieren ( Down%, Right% ) : mark the cells ///' + Dim Anzahl as Integer + + Kontext "DocumentCalc" + Anzahl = Right% - 1 + DocumentCalc.TypeKeys "<Shift Right>", Anzahl + Anzahl = Down% - 1 + DocumentCalc.TypeKeys "<Shift Down>", Anzahl +end sub +' +'------------------------------------------------------------------------------- +' +sub hRechteckErstellen ( BeginX%, BeginY%, EndX%, EndY% ) + '/// <b>IMPRESS/DRAW only</b> ///' + '/// hRechteckErstellen ( BeginX, BeginY, EndX, EndY ) : create a rectangle ///' + WL_DRAW_Rechteck + gMouseMove ( BeginX%, BeginY%, EndX%, EndY% ) +end sub +' +'------------------------------------------------------------------------------- +' +sub hTextrahmenErstellen ( TextEingabe$, BeginX%, BeginY%, EndX%, EndY% ) + '/// <b>IMPRESS/DRAW only</b> ///' + '/// hTextrahmenErstellen ( String, BeginX, BeginY, EndX, EndY ) : create a textbox with a textstring ///' + WL_SD_TextEinfuegenDraw + gMouseMove ( BeginX%, BeginY%, EndX%, EndY% ) + hTypeKeys TextEingabe$ +end sub +' +'------------------------------------------------------------------------------- +' +sub SchreibenInMathdok ( Eingabe as String ) + '/// <b>MATH only</b> ///' + '/// SchreibenInMathDok ( String ) : write text in a mathdocument ( with clipboard ) ///' + if Eingabe <> "Unsinn" then + SetClipboard Eingabe + else + SetClipboard "NROOT <?> <?><over b==<?>" + endif + if (GetClipboard() <> Eingabe) then + warnlog "--No Clipboard available :-(--" + printlog "---ClipTest--- should: "+Eingabe +", is: "+GetClipboard + endif + hUseAsyncSlot( "EditPaste" ) +end sub +' +'------------------------------------------------------------------------------- +' +function hEnableDocumentEditMode() as boolean + + hEnableDocumentEditMode() = false + + dim iTry as integer + + printlog( "Try to switch document to edit mode" ) + for iTry = 1 to 20 + try + kontext "Standardbar" + if ( Bearbeiten.getState( 2 ) <> 1 ) then + Bearbeiten.click() + + kontext "Active" + if ( Active.exists( 1 ) ) then + printlog( "Handle <Use copy message>" ) + hCloseDialog( Active, "yes" ) + wait( 2000 ) + printlog( "Successfully switched to edit mode" ) + hEnableDocumentEditMode() = true + exit for + endif + endif + catch + wait( 200 ) + endcatch + next iTry + +end function + +'******************************************************************************* + +function sMakeReadOnlyDocumentEditable() as boolean + + sMakeReadOnlyDocumentEditable() = hEnableDocumentEditMode() + exit function + + ' Function returns TRUE if document has been made editable and FALSE if + ' no action was required (that is: Document was not read-only) + + dim iTry as integer + dim iWait as integer + dim rc as integer + const CFN = "sMakeReadOnlyDocumentEditable::" + + if ( GVERBOSE ) then printlog( CFN & "Making document editable (create a copy) if it is readonly" ) + + ' We still run into synchronization problems with the "Make document editable" feature + ' because we do not know when this button becomes available and ready for use: The + ' document has to be loaded, then we have to wait for the toolbar to get populated. + ' One thing appears to work though: Try to execute the slot using hUseAsyncSlot. + ' This is a little bit tricky because the state of the document is altered but if + ' the slot has been executed once we know for sure that the button on the toolbar is + ' available and can check its state and - if need be - chenge the document state back. + + ' ========== Workaround begin ========== + hUseAsyncSlot( "EditDoc" ) + kontext "Active" + if ( Active.exists() ) then + if ( GVERBOSE ) then printlog( "Handling create copy message" ) + Active.yes() + wait( 1000 ) + endif + ' ========== Workaround end ========== + Kontext "Standardbar" + iWait = 0 + Do + if ( Bearbeiten.IsEnabled() ) then + try + if Bearbeiten.getState( 2 ) = 0 then + exit do + endif + catch + if ( GVERBOSE ) then printlog "Attempt " & iWait & " to make document readable failed" + iWait = iWait + 1 + wait ( 1000 ) + endcatch + else + if ( GVERBOSE ) then printlog "Attempt " & iWait & " to make document readable failed" + iWait = iWait + 1 + wait ( 1000 ) + end if + if iWait >= 5 then exit do + Loop + + if ( Bearbeiten.IsEnabled() ) then + + if ( Bearbeiten.getState( 2 ) = 0 ) then + + rc = hUseAsyncSlot("editdoc") + + if ( rc >= 0 ) then + for iTry = 1 to 2 + + + Kontext "Active" + if ( Active.exists( 5 ) ) then + + printlog( CFN & "Messagebox: " & Active.getText() ) + + try + if ( GVERBOSE ) then printlog( CFN & "Document was read-only. A copy will be used." ) + Active.Yes() + if ( GVERBOSE ) then printlog( CFN & "Closed 'use copy' message" ) + catch + if ( GVERBOSE ) then printlog( CFN & "Probing for unexpected messagebox..." ) + active.ok() + qaerrorlog( "#i100701 - Object not found message" ) + endcatch + else + printlog( CFN & "No messagebox informing about a copy being used" ) + endif + sMakeReadOnlyDocumentEditable() = TRUE + next iTry + else + printlog( CFN & "Document appears to be editable" ) + endif + else + if ( GVERBOSE ) then printlog( CFN & "Button <Bearbeiten> is pressed, document is editable" ) + sMakeReadOnlyDocumentEditable() = FALSE + endif + else + if ( GVERBOSE ) then printlog( CFN & "Control <Bearbeiten> is not enabled" ) + endif + +end function +' +'------------------------------------------------------------------------------- +' +function fSelectFirstOLE() as integer + 'Select first visible OLE object using Navigator + 'Returns error-code: + '+ 0 := Sucess + '- 1 := unknown application + + const RETVAL_SUCCESS = 0 + const RETVAL_UNKNOWN_APPLICATION = -1 + + const MAX_WAIT_FOR_NAVIGATOR = 10 + + dim bNavigatorWasVisible as boolean : bNavigatorWasVisible = FALSE + dim iIndex as integer + + fSelectFirstOLE() = RETVAL_UNKNOWN_APPLICATION + + select case ( gApplication ) + case "CALC" : Kontext "NavigatorCalc" + 'First check if Navigator is visible and remember result + if NavigatorCalc.exists ( MAX_WAIT_FOR_NAVIGATOR ) then + bNavigatorWasVisible = TRUE + else + try + 'Invoke Navigator if not visible + ViewNavigator + catch + 'If inside chart or elsewhere the call + 'will fail. Again trying the slot after + 'switching to the document. + Kontext "DocumentCalc" + DocumentCalc.TypeKeys "<Escape>" + ViewNavigator + endcatch + end if + Kontext "NavigatorCalc" + if NavigatorCalc.exists ( MAX_WAIT_FOR_NAVIGATOR ) then + 'Select first OLE in list + Liste.TypeKeys "<HOME>" + for iIndex = 1 to 8 + Liste.TypeKeys "-" + wait 500 + Liste.TypeKeys "<DOWN>" + wait 500 + next iIndex + Liste.select(6) + Liste.TypeKeys "+" + Liste.TypeKeys "<DOWN><RETURN>" + fSelectFirstOLE() = RETVAL_SUCCESS + else + QAErrorLog "Navigator couldn't be opened!" + end if + case "DRAW" , "IMPRESS" : Kontext "NavigatorDraw" + if NavigatorDraw.Exists( MAX_WAIT_FOR_NAVIGATOR ) then + bNavigatorWasVisible = TRUE + else + try + 'Invoke Navigator if not visible + ViewNavigator + catch + 'If inside chart or elsewhere the call + 'will fail. Again trying the slot after + 'switching to the document. + Kontext "DocumentDraw" + DocumentDraw.TypeKeys "<Escape>" + ViewNavigator + endcatch + Kontext "NavigatorDraw" + if NavigatorDraw.exists( MAX_WAIT_FOR_NAVIGATOR ) then + 'Select first OLE in list + Liste.TypeKeys "<HOME>" + Liste.select(1) + Liste.TypeKeys "+<DOWN><RETURN>" + fSelectFirstOLE() = RETVAL_SUCCESS + else + QAErrorLog "Navigator did not open!" + end if + end if + + case "WRITER" , "HTML" , "MASTERDOCUMENT" : + select case ( gApplication ) + case "MASTERDOCUMENT" : Kontext "NavigatorGlobalDoc" + if NavigatorGlobalDoc.Exists( MAX_WAIT_FOR_NAVIGATOR ) then + bNavigatorWasVisible = TRUE + else + ViewNavigator + end if + wait 500 + Kontext "NavigatorGlobalDoc" + if Liste.IsVisible then + Kontext "GlobaldokumentToolbox" + Umschalten.Click + endif + case else : Kontext "NavigatorWriter" + 'First check if Navigator is visible and remember result + if NavigatorWriter.Exists ( MAX_WAIT_FOR_NAVIGATOR ) then + bNavigatorWasVisible = TRUE + else + try + 'Invoke Navigator if not visible + ViewNavigator + catch + 'If inside chart or elsewhere the call + 'will fail. Again trying the slot after + 'switching to the document. + Kontext "DocumentWriter" + call gMouseclick (99,99) + call gMouseclick (50,50) + ViewNavigator + endcatch + end if + end select + Kontext "NavigatorWriter" + if NavigatorWriter.Exists( MAX_WAIT_FOR_NAVIGATOR ) then + ' Check if all content is visible + if Auswahlliste.GetItemCount < 2 then + Inhaltsansicht.Click + end if + 'Select first OLE in list + Auswahlliste.TypeKeys "<HOME>" + for iIndex = 1 to 13 + Auswahlliste.TypeKeys "-<DOWN>" + next iIndex + Auswahlliste.select(5) + Auswahlliste.TypeKeys "+<DOWN><RETURN>" + fSelectFirstOLE() = RETVAL_SUCCESS + else + QAErrorLog "Navigator did not occoured!" + end if + case else : QAErrorLog "Application not supported" + end select + + 'Close navigator if it was invisible by entering the routine + if bNavigatorWasVisible = TRUE then + printlog "Leaving navigator open as initially found" + else + if ( fSelectFirstOLE = RETVAL_SUCCESS ) then + ViewNavigator + printlog "Closing navigator as initially found" + else + printlog "Closing navigator not needed. It was not possible to open it." + end if + end if +end function |