From e55e83227ddb8f555543d10dc4e407ec4e21b51b Mon Sep 17 00:00:00 2001 From: Sebastian Dröge Date: Wed, 19 Aug 2015 12:50:56 +0300 Subject: Release 1.5.90 --- ChangeLog | 976 +++++++++++++++++++++++++++ NEWS | 2 +- RELEASE | 88 ++- configure.ac | 4 +- docs/plugins/gstreamer-plugins.args | 2 +- docs/plugins/inspect/plugin-coreelements.xml | 4 +- gstreamer.doap | 10 + win32/common/config.h | 8 +- win32/common/gstenumtypes.c | 3 + win32/common/gstversion.h | 4 +- 10 files changed, 1058 insertions(+), 43 deletions(-) diff --git a/ChangeLog b/ChangeLog index be359afc26..9d35088e94 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,979 @@ +=== release 1.5.90 === + +2015-08-19 Sebastian Dröge + + * configure.ac: + releasing 1.5.90 + +2015-08-19 11:17:29 +0300 Sebastian Dröge + + * po/zh_CN.po: + po: Update translations + +2015-08-18 15:44:02 +0100 Tim-Philipp Müller + + * libs/gst/base/gstbaseparse.c: + baseparse: avoid tag list spam if upstream provides bitrate tags already + Explicitly keep track again whether upstream tags or parser tags + already contain bitrate information, and only force a tag update + for a bitrate if we are actually going to add the bitrate to the + taglist later. This fixes constant re-sending of the same taglist, + because upstream provided a bitrate already and we didn't add it, + so we didn't save the 'posted' bitrate, which would then in turn + again trigger the 'bitrate has changed too much, update tags' + code path. Fixes tag spam with m4a files for example. + https://bugzilla.gnome.org/show_bug.cgi?id=679768 + +2015-08-17 22:06:11 +0200 Stefan Sauer + + * gst/gstdebugutils.c: + debugutils: bring the dot style a bit closer to what we use in the docs + Use round corners for bins and elements. Put sink pads on the left and src pads + on the right of elements. + +2015-08-15 18:30:15 +0100 Tim-Philipp Müller + + * libs/gst/base/gstbaseparse.c: + baseparse: fix tag handling + In 0.10 there were no sticky events, and all tag events + sent would just be merged with the previously-received + tags. In 1.x we have sticky events, and the tags in the + tag event(s) should at all times carry the complete tags, + so we can't just push some tags and then just push tags + with just bitrates to update the bitrates, etc. + Instead we need to keep track of the upstream stream tags + received, of the tags set by the video decoder subclass, + and send an updated tag event with the combined tags + including our own bitrate tags (if applicable) whenever + the upstream tags, the subclass tags or any of our bitrates + change. + https://bugzilla.gnome.org/show_bug.cgi?id=679768 + +2015-08-16 10:15:56 +0100 Tim-Philipp Müller + + * docs/libs/gstreamer-libs-sections.txt: + * libs/gst/base/gstbaseparse.c: + * libs/gst/base/gstbaseparse.h: + * win32/common/libgstbase.def: + baseparse: add API for subclass to set tags + This is needed so that we can do proper tag handling + all around, and combine the upstream tags with the + tags set by the subclass and any extra tags the + base class may want to add. + API: gst_base_parse_merge_tags() + https://bugzilla.gnome.org/show_bug.cgi?id=679768 + +2015-08-15 16:01:28 +0100 Tim-Philipp Müller + + * libs/gst/base/gstbaseparse.c: + baseparse: save upstream stream tags + We'll need those later. + https://bugzilla.gnome.org/show_bug.cgi?id=679768 + +2015-08-15 16:39:40 +0100 Tim-Philipp Müller + + * libs/gst/base/gstbaseparse.c: + baseparse: minor code simplification + Use gst_pad_peer_query_duration() and remove a few + unnecessary levels of indentation. Rest of code might + looks a bit questionable, but leave it as is for now. + +2015-08-15 17:59:21 +0200 Sebastian Dröge + + * gst/gstpad.c: + pad: Break sticky event array iterations if the type is bigger than the one we look for + Microoptimization we can do because the array is sorted by type. + +2015-04-29 15:49:17 +0200 Edward Hervey + + * gst/gstpad.c: + * gst/gstpad.h: + * tests/check/gst/gstpad.c: + gstpad: Add a new GST_PROBE_HANDLED return value for probes + In some cases, probes might want to handle the buffer/event/query + themselves and stop the data from travelling further downstream. + While this was somewhat possible with buffer/events and using + GST_PROBE_DROP, it was not applicable to queries, and would result + in the query failing. + With this new GST_PROBE_HANDLED value, the buffer/event/query will + be considered as successfully handled, will not be pushed further + and the appropriate return value (TRUE or GST_FLOW_OK) will be returned + This also allows probes to return a non-default GstFlowReturn when dealing + with buffer push. This can be done by setting the + GST_PAD_PROBE_INFO_FLOW_RETURN() field accordingly + https://bugzilla.gnome.org/show_bug.cgi?id=748643 + +2015-08-15 13:25:35 +0200 Mathieu Duponchelle + + * gst/gstversion.h.in: + gstversion: Add missing include in .in file. + +2015-08-11 00:35:21 +0200 Mathieu Duponchelle + + * gst/glib-compat.h: + * gst/gstallocator.h: + * gst/gstatomicqueue.h: + * gst/gstcapsfeatures.h: + * gst/gstclock.h: + * gst/gstcompat.h: + * gst/gstcontext.h: + * gst/gstdeviceprovider.h: + * gst/gstelementmetadata.h: + * gst/gstmacros.h: + * gst/gstmemory.h: + * gst/gstmeta.h: + * gst/gstpad.h: + * gst/gstpluginloader.h: + * gst/gstquark.h: + * gst/gsttrace.h: + Headers: add missing includes. + +2015-08-15 06:41:14 -0300 Thiago Santos + + * docs/gst/gstreamer-sections.txt: + docs: add the new pad accept-template flag to the docs + +2015-08-14 22:44:50 +0530 Nirbheek Chauhan + + * docs/libs/gstreamer-libs-sections.txt: + docs: section entry missing for gst_direct_control_binding_new_absolute + +2015-08-14 08:14:52 -0300 Thiago Santos + + * tests/check/gst/gstpad.c: + tests: pad: tests for accept-caps default handling + Check if all the default 4 accept-caps possibilities are working: + subset or intersect check and query-caps or template caps comparisons. + https://bugzilla.gnome.org/show_bug.cgi?id=753623 + +2015-08-14 07:51:07 -0300 Thiago Santos + + * gst/gstpad.c: + * gst/gstpad.h: + pad: add GST_PAD_FLAG_ACCEPT_TEMPLATE + It will make the default accept-caps handler use the pad template + caps instead of the query-caps result to check if the caps is + acceptable. This is aligned with what the design docs says the + accept-caps should do (be non-recursive) and should be faster. It + is *not* enabled by default, though. + API: GST_PAD_FLAG_ACCEPT_TEMPLATE + API: GST_PAD_IS_ACCEPT_TEMPLATE + API: GST_PAD_SET_ACCEPT_TEMPLATE + API: GST_PAD_UNSET_ACCEPT_TEMPLATE + https://bugzilla.gnome.org/show_bug.cgi?id=753623 + +2015-08-14 11:10:03 +0200 Edward Hervey + + * tests/check/generic/states.c: + check: Rename states unit test + Makes it easier to differentiate from other modules states unit test + +2015-08-13 13:08:03 -0300 Thiago Santos + + * libs/gst/base/gstbasetransform.c: + basetransform: rework accept-caps + According to the design docs: + The ACCEPT_CAPS query is not required to work recursively, it can simply + return TRUE if a subsequent CAPS event with those caps would return + success. + So make it a shallow check instead of recursivelly check downstream. + https://bugzilla.gnome.org/show_bug.cgi?id=748635 + +2015-08-13 12:44:29 -0300 Thiago Santos + + * libs/gst/base/gstbasetransform.c: + basetransform: remove some dead code + Doesn't seem like it is going to get back to life anytime soon + Also removes a {} block that was likely used to keep the dead + code around. + +2015-08-11 08:07:53 -0300 Thiago Santos + + * libs/gst/base/gstbasetransform.c: + basetransform: respect accept-caps intersect flag + GstPad has a flag for suggesting if the accept-caps + query should use intersect instead of the default + subset caps operation to verify if the caps would be + acceptable. + basetransform currently always uses the subset check and + this patch makes it honor the flag for using intersect + if it is set. + https://bugzilla.gnome.org/show_bug.cgi?id=748635 + +2015-08-12 13:12:38 +0900 Vineeth TM + + * libs/gst/base/gstbasetransform.c: + basetransform: remove unreachable return statement + https://bugzilla.gnome.org/show_bug.cgi?id=753538 + +2015-08-11 11:09:24 +0100 Tim-Philipp Müller + + * tests/check/libs/.gitignore: + tests: ignore new harness test binary + +2015-08-10 15:31:37 +0300 Vivia Nikolaidou + + * gst/gstdatetime.c: + * tests/check/gst/gstdatetime.c: + datetime: accept just a time as ISO 8601 string and use today's date then + If no date and only a time is given in gst_date_time_new_from_iso8601_string(), + assume that it is "today" and try to parse the time-only string. "Today" is + assumed to be in the timezone provided by the user (if any), otherwise Z - + just like the behavior of the existing code. + https://bugzilla.gnome.org/show_bug.cgi?id=753455 + +2015-07-24 00:41:57 +0200 Havard Graff + + * docs/libs/gstreamer-libs-sections.txt: + * libs/gst/check/Makefile.am: + * libs/gst/check/gstharness.c: + * libs/gst/check/gstharness.h: + * tests/check/Makefile.am: + * tests/check/libs/gstharness.c: + harness: add _set_forwarding function + To be able to disable the slightly "magic" forwarding of the + necessary events between the harnesses. + Also introduce a new test-suite for GstHarness, that documents the + feature, and should hopefully expand into documenting most of the + features the harness possesses. + https://bugzilla.gnome.org/show_bug.cgi?id=752746 + +2015-08-08 17:59:51 +0200 Wim Taymans + + * gst/gstdevicemonitor.c: + devicemonitor: fix provider leak + +2015-08-08 15:28:19 +0200 Edward Hervey + + * gst/gstpad.c: + pad: Fix previous commit + We want to get the caps query *result* + +2015-07-16 18:56:00 +0200 Wim Taymans + + * gst/gstdevicemonitor.c: + * gst/gstdevicemonitor.h: + * gst/gstdeviceprovider.c: + * gst/gstdeviceprovider.h: + * win32/common/libgstreamer.def: + deviceprovider: Add method to hide devices from a provider + Add methods to add/remove the providers that should be hidden by this + provider. Also make a method to get a list of hidden providers. + This makes it possible to have multiple systems monitor the same devices + and remove duplicates. + Add a property to see all devices, even duplicate ones from hidden + providers. + +2015-08-08 14:42:52 +0200 Edward Hervey + + * gst/gstpad.c: + pad: get_allowed_caps() should go through both pads + The previous implementation was doing a direct call to the peer pad, + which resulted in query probes never being called on the original pad. + Instead of that, get the peer pad caps by using gst_pad_peer_query() + which will call probes in the expected fashion. + +2015-08-07 10:08:21 +0900 Vineeth TM + + * gst/gstvalue.c: + value: free caps during failure + While calling gst_value_deserialize_sample, if there is a failure + after caps is ref'ed, then caps is getting leaked. Hence checking for + caps in fail: goto condition and unref'ing it + https://bugzilla.gnome.org/show_bug.cgi?id=753338 + +2015-07-21 13:35:33 +0200 Thibault Saunier + + * gst/gst_private.h: + * gst/gstplugin.c: + * gst/gstregistry.c: + registry: Add plugins to the registry we are loading and not default one + When running gst_registry_scan_plugin_file we were losing the + information about the registry being loaded and ended up adding the + plugin to the default registry which was not correct. + https://bugzilla.gnome.org/show_bug.cgi?id=752662 + +2015-08-05 15:51:27 -0400 Nicolas Dufresne + + * libs/gst/base/gstbasesink.c: + basesink: Only drop buffer if their PTS is out of segment + As of now, even for stream completly inside segment, there is no + guarantied that the DTS will be inside the segment. Specifically + for H.264 with B-Frames, the first few frames often have DTS that + are before the segment. + Instead of using the sync timestamp to clip out of segment buffer, + take the duration from the start/stop provided by the sub-class, and + check if the pts and pts_end is out of segment. + https://bugzilla.gnome.org/show_bug.cgi?id=752791 + +2015-08-05 14:05:25 +0100 Luis de Bethencourt + + * libs/gst/check/gstharness.c: + harness: don't run code inside g_assert + Even though asserts can't be disabled in GstHarness, Coverity still + complains about running code inside them. Moving the code to outside the + g_asserts(). + CID #1311326, #1311327, #1311328 + +2015-07-17 10:18:02 +0200 Wim Taymans + + * gst/gstdevicemonitor.c: + * gst/gstdevicemonitor.h: + * win32/common/libgstreamer.def: + devicemonitor: get a list of currently monitored providers + Get a list of the currently monitored providers. + +2015-08-02 17:38:14 +0200 George Kiagiadakis + + * gst/gstpad.c: + pad: fix invalid unref after IDLE probe on non-OK flow return + In case there is an IDLE probe fired from gst_pad_push_data and it + doesn't return GST_FLOW_OK, the code jumps to the probe_stopped + label which tries to unref the data object. However, at this point + the data object belongs downstream and must not be touched. + By setting data = NULL, the code skips this unref. + https://bugzilla.gnome.org//show_bug.cgi?id=753151 + +2015-08-04 20:08:04 +1000 Jan Schmidt + + * gst/gstbuffer.c: + buffer: Fix the name of the parentbuffermeta debug category. + Don't use 'glbufferrefmeta' as the debug category for the + parent buffer meta. + +2015-08-04 13:45:09 +0900 Eunhae Choi + + * plugins/elements/gstqueue2.c: + queue2: not update upstream size with negative value + upstream_size can be negative but queue->upstream_size is unsigned type. + to get a chance to update queue->upstream_size in gst_queue2_get_range() + it should keep the default value. + https://bugzilla.gnome.org/show_bug.cgi?id=753011 + +2015-08-04 19:59:28 +1000 Jan Schmidt + + * gst/gstbuffer.c: + * win32/common/libgstreamer.def: + buffer: Remove extra debug symbol from exports + Don't export the debug variable for the parent_buffer_meta. + This was accidentally exported and shouldn't be public + +2015-08-04 00:11:24 +0200 Stefan Sauer + + * plugins/elements/gstfilesink.c: + filesink: use GST_INFO_OBJECT for more detail + Helps to distiguish multiple filesinks. + +2015-07-30 17:29:25 +0100 Tim-Philipp Müller + + * gst/gstinfo.h: + docs: info: remove 0.8 terminology from log level description + We don't "iterate" bins or pipelines any more. + +2015-07-30 12:17:16 +0100 Tim-Philipp Müller + + * tests/check/libs/baseparse.c: + tests: baseparse: fix buffer leak in unit test + Fixes make check-valgrind + +2015-07-28 21:14:22 -0400 Nicolas Dufresne + + * gst/gstsegment.h: + doc/seekflags: Fix cross references + This fixes miss-use of @ instead of % to refer to enumeration + values. + +2015-07-28 22:30:54 +0100 Tim-Philipp Müller + + * docs/gst/gstreamer-sections.txt: + docs: add a few more new symbols and defines + +2015-07-28 16:57:43 -0400 Nicolas Dufresne + + * plugins/elements/gstcapsfilter.h: + doc/capsfilter: Document filtering modes + This is documentation for the HTML documentation. + +2015-07-28 16:50:55 -0400 Nicolas Dufresne + + * docs/plugins/gstreamer-plugins-sections.txt: + * plugins/elements/gstfilesink.c: + * plugins/elements/gstfilesink.h: + doc/filesink: Add BufferMode enumeration + This is purely for documentation purpose. This way the values will + show up in the HTML documentation. + +2015-07-28 15:50:40 -0400 Nicolas Dufresne + + * libs/gst/check/gstharness.c: + doc/gsthardness: Fix typo in GstAllocationParams + It's not GstAllocatorParams but GstAllocationParams. + +2015-07-28 15:46:09 -0400 Nicolas Dufresne + + * libs/gst/check/gstharness.c: + doc/gstharness: Remove unknown parameter + sink_elenment_name is not a parameter of gst_harness_add_sink_harness() + function, but still it show up in documentation. + +2015-07-28 12:19:04 +0300 Sebastian Dröge + + * plugins/elements/gstcapsfilter.c: + * plugins/elements/gstcapsfilter.h: + capsfilter: Only remember previous filter caps if they were actually used for something + If nobody ever saw the previous filter caps, nothing could've negotiated with + them and we can just pretend they never existed at all. + +2015-07-28 12:16:12 +0300 Sebastian Dröge + + * plugins/elements/gstcapsfilter.c: + capsfilter: When switching caps change modes, forget all previous caps + +2015-07-23 18:15:05 -0400 Olivier Crête + + * libs/gst/base/gstbasetransform.c: + basetransform: Return FLOW_FLUSHING if negotiation fails during shutdown + https://bugzilla.gnome.org/show_bug.cgi?id=752800 + +2015-07-22 18:55:29 -0400 Olivier Crête + + * libs/gst/check/gstharness.c: + harness: Fix indendation + +2015-07-21 13:14:59 -0400 Nicolas Dufresne + + * libs/gst/base/gstbasetransform.c: + basetransform: Avoid increasing query reference + gst_query_find_allocation_meta() requires the query to be + writable to work. This patch ensure avoids taking a reference + on the query, so we can now check if a certain allocation meta + is present. + https://bugzilla.gnome.org/show_bug.cgi?id=752661 + +2015-07-22 15:38:06 +0100 Tim-Philipp Müller + + * gst/gstbuffer.c: + docs: fix description of gst_buffer_extract_dup() + No GBytes involved. + +2015-07-21 00:17:28 -0300 Thiago Santos + + * plugins/elements/gstconcat.c: + concat: dot not reset pad states too early + Resetting the flushing state of the pads at the end of the + PAUSED_TO_READY transition will make pads handle serialized + queries again which will wait for non-active pads and might + cause deadlocks when stopping the pipeline. + Move the reset to the READY_TO_PAUSED instead. + https://bugzilla.gnome.org/show_bug.cgi?id=752623 + +2015-07-20 16:18:06 +0200 Havard Graff + + * docs/libs/gstreamer-libs-sections.txt: + * libs/gst/check/Makefile.am: + * libs/gst/check/gstharness.c: + * libs/gst/check/gstharness.h: + harness: add functions for adding sub-harnesses directly + By introducing gst_harness_add_src_harness and gst_harness_add_sink_harness + we collect all sub-harness setup in one function, making the previous + sub-harness creation functions now calls these directly, and making it + much easier (and less error-prone) to add your own src or sink-harness + using the more generic harness-creation functions. + +2015-07-17 17:44:52 -0400 Nicolas Dufresne + + * libs/gst/base/gstbaseparse.c: + baseparse: Don't override gst_segment_do_seek() + This line has no purpose, clearly gst_segment_do_seek() is doing + the right job, also, having the start time (a timestamp) be that + same as time (the stream time) is quite odd. + https://bugzilla.gnome.org/show_bug.cgi?id=750783 + +2015-07-17 17:43:26 -0400 Nicolas Dufresne + + * libs/gst/base/gstbaseparse.c: + baseparse: Fix extrapolation of seeksegment.stop + The stop shall be relative to start if extrapolated from the + duration. + https://bugzilla.gnome.org/show_bug.cgi?id=750783 + +2015-07-16 18:47:20 +0200 Wim Taymans + + * gst/gstdevicemonitor.c: + devicemonitor: do start and stop outside of the lock + Release the monitor lock when calling the provider start/stop methods. + Because we release the lock now, We need to make sure we check the + cookie again and keep track of started and removed providers. + +2015-07-16 18:43:06 +0200 Wim Taymans + + * gst/gstdeviceprovider.c: + * gst/gstdeviceprovider.h: + deviceprovider: small cleanups + Protect against wrong arguments. + Clean up the header file indentation. + +2015-07-16 17:25:24 +0200 Wim Taymans + + * gst/gstdevicemonitor.c: + devicemonitor: keep order of providers and devices + The deviceproviders are added to the array sorted by their rank. Make + sure we keep this ordering when removing a provider. + We use _prepend to collect the devices, use g_list_reverse to get the + devices in the right order; sorted by rank and in the same order as + returned by the provider. + +2015-07-16 17:50:49 +0100 Tim-Philipp Müller + + * libs/gst/check/gstharness.c: + harness: fix indentation + +2015-07-16 17:50:06 +0100 Tim-Philipp Müller + + * libs/gst/check/gstharness.c: + harness: fix pad template leak + +2015-07-16 17:13:35 +0100 Tim-Philipp Müller + + * gst/gstplugin.c: + docs: drop reference to sourceforge mailing list adress + +2015-07-16 17:53:40 +0200 Havard Graff + + * libs/gst/check/gstharness.c: + harness: don't re-establish the harness sink and src pads + Given that the element has the possibility to have one, they should + already be there. + https://bugzilla.gnome.org/show_bug.cgi?id=752498 + +2015-07-13 11:03:13 +0200 Stian Selnes + + * libs/gst/check/gstharness.c: + * libs/gst/check/gstharness.h: + harness: Improve detection of element type + The element flag does not indicate wether a bin should be tested as a + source or as a sink, eg. a bin with the sink flag may still have a + source pad and a bin with the source flag may have a sink pad. In this + case it is better to determine the element type by looking at the + available pads and pad templates. + Also rename srcpad and sinkpad where it actually represents + element_srcpad_name and element_sinkpad_name. + https://bugzilla.gnome.org/show_bug.cgi?id=752493 + +2015-07-13 11:10:49 +0200 Stian Selnes + + * libs/gst/check/gstharness.c: + harness: Forward sticky events to sink harness + Fixes issue where if a sink harness was added late the sticky events + would not be forwared. + https://bugzilla.gnome.org/show_bug.cgi?id=752494 + +2015-07-16 12:36:14 +0100 Tim-Philipp Müller + + * libs/gst/check/gstharness.h: + harness: make header nicer to read + +2015-07-16 10:36:36 +0100 Tim-Philipp Müller + + * docs/gst/gstreamer-sections.txt: + docs: add new function to API docs + +2015-07-15 18:21:13 +0200 Wim Taymans + + * gst/gstdevice.c: + * gst/gstdevice.h: + * win32/common/libgstreamer.def: + device: add generic struct with properties + Add a generic structure to hold any additional properties about the + device. + +2015-07-14 12:44:12 +0100 Tim-Philipp Müller + + * plugins/elements/gsttee.c: + tee: fix typo in allow-not-linked property description + +2015-07-13 14:24:34 +0100 Tim-Philipp Müller + + * gst/gstbus.c: + docs: bus: mention main loop requirement in gst_bus_add_watch() docs + +2015-03-18 16:05:34 +0530 Prashant Gotarne + + * gst/gsttask.c: + task: add function guard for _set_lock() and fix guard for _join() + Should only access the object structure after checking + it's valid in gst_task_join(). + https://bugzilla.gnome.org/show_bug.cgi?id=746385 + https://bugzilla.gnome.org/show_bug.cgi?id=746431 + +2015-05-19 18:58:11 +0200 Philippe Normand + + * gst/gstprotection.c: + protection: implement meta transform function + Copy the GstMeta contents over to the new buffer. + https://bugzilla.gnome.org/show_bug.cgi?id=749590 + +2015-07-10 09:12:15 +0900 Vineeth TM + + * libs/gst/base/gstbaseparse.c: + baseparse: estimate duration on EOS + For files which are smaller than 1.5 seconds, the duration + estimation does not happen. So the duration will always be + displayed as 0. Updating the duration on EOS when the estimation + has not happened already + https://bugzilla.gnome.org/show_bug.cgi?id=750131 + +2015-07-10 11:01:21 +0900 Hyunjun Ko + + * libs/gst/base/gstadapter.c: + adapter: change log message properly + https://bugzilla.gnome.org/show_bug.cgi?id=752116 + +2015-07-09 00:12:51 +0900 Justin Joy + + * plugins/elements/gststreamiddemux.c: + * plugins/elements/gststreamiddemux.h: + docs: add StreamidDemux to documentation + https://bugzilla.gnome.org/show_bug.cgi?id=749873 + +2015-07-09 00:21:42 +0900 Hyunjun Ko + + * libs/gst/base/gstadapter.c: + adapter: fix to get valid (buffer_)list + get_list/get_buffer_list should be done with buffers in adapter remaining + while take_list/take_buffer_list flushes each buffer one by one. + https://bugzilla.gnome.org/show_bug.cgi?id=752116 + +2015-07-08 20:06:27 +0900 Hyunjun Ko + + * tests/check/libs/adapter.c: + adapter: unit test for new get_(buffer_)list + +2015-07-08 12:00:56 +0200 Arnaud Vrac + + * libs/gst/base/gstbaseparse.c: + baseparse: put buffer in a correct state after gst_adapter_get_buffer call + We must make the buffer writable to write its PTS and DTS, and also + reset its duration. + The behaviour is now the same as before commit c3bcbadd, except metas + might still be attached to the buffer extracted from the adapter. + https://bugzilla.gnome.org/show_bug.cgi?id=752092 + +2015-07-07 15:02:45 +0100 Tim-Philipp Müller + + * libs/gst/check/gstharness.c: + harness: fix indentation and replace stress test function macros + These screw with indentation and seem a bit trivial. Just copy'n'paste. + +2015-07-07 10:46:48 +0900 Hyunjun Ko + + * gst/gstbuffer.c: + * libs/gst/net/gstnetaddressmeta.c: + * libs/gst/net/gstnetcontrolmessagemeta.c: + * tests/check/gst/gstmeta.c: + meta: transform_func: return FALSE if not supported or failed + https://bugzilla.gnome.org/show_bug.cgi?id=751778 + +2015-07-07 11:53:07 +0200 Havard Graff + + * plugins/elements/gstidentity.c: + * tests/check/elements/identity.c: + identity: refactor and add tests using GstHarness + Writing a test for unscheduling the gst_clock_id_wait inside the + identity element, found an invalid read, caused by removing the clock-id + when calling _unschedule instead of letting the code calling _wait remove + the clock-id after being unscheduled. + https://bugzilla.gnome.org/show_bug.cgi?id=752055 + +2014-04-12 19:48:15 +0100 Tim-Philipp Müller + + * libs/gst/check/Makefile.am: + * libs/gst/check/gstharness.c: + harness: make sure g_assert() statements are always active + We have code with side effects inside g_assert()s, so make + sure those are always enabled here (they might otherwise + get disabled for release builds). + +2015-07-07 00:56:41 +0100 Tim-Philipp Müller + + * docs/libs/gstreamer-libs-sections.txt: + * libs/gst/check/gstharness.c: + * libs/gst/check/gstharness.h: + harness: rename GstHarnessPrepareBuffer -> GstHarnessPrepareBufferFunc + https://bugzilla.gnome.org/show_bug.cgi?id=751916 + +2015-07-07 00:53:48 +0100 Tim-Philipp Müller + + * docs/libs/gstreamer-libs-docs.sgml: + * docs/libs/gstreamer-libs-sections.txt: + * libs/gst/check/check.h: + * libs/gst/check/gstharness.c: + * libs/gst/check/gstharness.h: + docs: add GstHarness to documentation + https://bugzilla.gnome.org/show_bug.cgi?id=751916 + +2013-12-16 10:47:47 +0100 Havard Graff + + * libs/gst/check/Makefile.am: + * libs/gst/check/gstharness.c: + * libs/gst/check/gstharness.h: + check: Add GstHarness convenience API for unit tests + http://gstconf.ubicast.tv/videos/gstharness-again-a-follow-up/ + https://bugzilla.gnome.org/show_bug.cgi?id=751916 + +2015-07-06 09:26:58 +0900 Vineeth TM + + * libs/gst/base/gstbaseparse.c: + baseparse: reverse playback in pull mode + right now reverse playback is disabled in pull mode. + enabling the code for the same and changing a bit of logic + to make reverse playback work. + https://bugzilla.gnome.org/show_bug.cgi?id=750783 + +2015-06-20 08:33:26 +0900 Vineeth T M + + * tests/check/libs/baseparse.c: + baseparse: add reverse playback test in pull mode + add test for reverse playback in pull mode and compare + the buffers being received in sink chain to make sure + the playback is allright + https://bugzilla.gnome.org/show_bug.cgi?id=750783 + +2015-07-06 14:31:24 +0530 Arun Raghavan + + * scripts/git-update.sh: + Revert "scripts: Allow passing make flags to git-update.sh" + This reverts commit ab5fdd72129ea61e8dff51cdc0afcccac03ebc2b. + We can use the MAKEFLAGS environment variable to pass options to make, + so avoid adding another mechanism that could be confusing. + +2015-07-06 11:16:27 +0530 Arun Raghavan + + * gst/gstpad.h: + pad: Clarify pad probe return type documentation + +2015-07-02 14:32:21 +0800 Song Bing + + * libs/gst/base/gstbasesink.c: + basesink: Shouldn't drop buffer when sync=false + Shouldn't drop buffer when sync=false + https://bugzilla.gnome.org/show_bug.cgi?id=751819 + +2015-07-06 11:25:50 +0530 Arun Raghavan + + * scripts/git-update.sh: + scripts: Allow passing make flags to git-update.sh + Mostly adding this for add a -jN as appropriate while building. + +2015-05-30 14:27:05 +0100 Tim-Philipp Müller + + * plugins/elements/gstqueue.c: + queue: avoid slice allocs/frees for each item + Microoptimisation: Let GstQueueArray store our + item struct. That way we don't have to alloc/free + temporary QueueItem slices for every item we want + to put into the queue. + https://bugzilla.gnome.org/show_bug.cgi?id=750149 + +2015-05-30 13:07:50 +0100 Tim-Philipp Müller + + * docs/libs/gstreamer-libs-sections.txt: + * libs/gst/base/gstqueuearray.c: + * libs/gst/base/gstqueuearray.h: + * win32/common/libgstbase.def: + queuearray: allow storing of structs in addition to pointers + This way we don't have to allocate/free temporary structs + for storing things in the queue array. + API: gst_queue_array_new_for_struct() + API: gst_queue_array_push_tail_struct() + API: gst_queue_array_peek_head_struct() + API: gst_queue_array_pop_head_struct() + API: gst_queue_array_drop_struct() + https://bugzilla.gnome.org/show_bug.cgi?id=750149 + +2015-07-03 21:57:55 +0200 Stefan Sauer + + * common: + Automatic update of common submodule + From f74b2df to 9aed1d7 + +2015-06-19 00:05:44 -0400 Olivier Crête + + * gst/gstpad.c: + * tests/check/gst/gstbin.c: + pad: Enforce NEED_PARENT flag also for chain + The check for the presence of the parent in the presence of + the NEED_PARENT flag was missing for the chain function. Also keep + a ref on the parent in case the pad is removed mid-chain. + +2015-07-03 15:55:08 +0200 Stefan Sauer + + * docs/plugins/gstreamer-plugins-docs.sgml: + * docs/plugins/gstreamer-plugins-sections.txt: + * docs/plugins/gstreamer-plugins.args: + * docs/plugins/inspect/plugin-coreelements.xml: + docs: update for two missing elements + Concat was not linked and streamiddemux was missing. + +2015-07-03 12:37:54 +0200 Stefan Sauer + + * docs/plugins/gstreamer-plugins-sections.txt: + * plugins/elements/gstcapsfilter.c: + * plugins/elements/gstcapsfilter.h: + * plugins/elements/gstfakesrc.c: + docs: another sweep canonicalizing the plugin docs sections file + Use underscores for capsfilter macros. Correct the type-name for fakesrc + if we ever implement the enum. + +2015-07-03 11:45:19 +0200 Stefan Sauer + + * docs/plugins/gstreamer-plugins-sections.txt: + * plugins/elements/gsttypefindelement.h: + docs: order and canonicalize the -sections.txt file + Have all sections in alphabetical order. Also make the macro order consistent. + This is a preparation for generating the file. Remove GET_CLASS macro for + typefine element, since it is not used and the header is not installed. + +2013-12-16 11:24:17 +0100 Stian Selnes + + * gst/gstmemory.h: + memory: Add missing field initializers to GstMapInfo + https://bugzilla.gnome.org/show_bug.cgi?id=751881 + +2015-07-02 15:10:43 +0100 Luis de Bethencourt + + * plugins/elements/gstinputselector.c: + inputselector: remove always-true check + event can't be NULL, it has been dereferenced by GST_EVENT_TYPE (), and no + case frees the pointer. Remove unnecessary check which will always be True. + CID #1308955 + +2015-07-01 10:50:19 +0200 Sebastian Dröge + + * libs/gst/base/gstbasetransform.c: + transform: Also copy POOL metas and make sure to copy over metas when creating subbuffers + POOL meta just means that this specific instance of the meta is related to a + pool, a copy should be made when reasonable and the flag should just not be + set in the copy. + +2015-07-01 10:45:01 +0200 Sebastian Dröge + + * libs/gst/base/gstadapter.c: + adapter: Also copy POOL metas and make sure to copy over metas when creating subbuffers + POOL meta just means that this specific instance of the meta is related to a + pool, a copy should be made when reasonable and the flag should just not be + set in the copy. + +2015-07-01 10:36:36 +0200 Sebastian Dröge + + * gst/gstbuffer.c: + buffer: Don't copy "memory" metas unconditionally + Don't copy memory metas if we only copied part of the buffer, didn't + copy memories or merged memories. In all these cases the memory + structure has changed and the memory meta becomes meaningless. + https://bugzilla.gnome.org/show_bug.cgi?id=751712 + +2015-07-01 10:25:15 +0200 Sebastian Dröge + + * gst/gstbuffer.c: + Revert "buffer: Don't copy POOLED and memory metadata unconditionally" + This reverts commit 7a08fa5ec4804f104e9aa9f458322f6eb49a7e49. + +2015-06-30 13:38:10 +0200 Sebastian Dröge + + * gst/gstbuffer.c: + buffer: Don't copy POOLED and memory metadata unconditionally + https://bugzilla.gnome.org/show_bug.cgi?id=751712 + +2015-06-30 11:18:24 +0200 Sebastian Dröge + + * libs/gst/base/gstbaseparse.c: + baseparse: Use new gst_adapter_get_buffer() API instead of gst_adapter_map() + This preserves GstMeta properly unless the subclass does special things. It's + enough to make h264parse's stream-format/alignment conversion pass through + metas as needed. + https://bugzilla.gnome.org/show_bug.cgi?id=742385 + +2015-06-30 11:11:25 +0200 Sebastian Dröge + + * docs/libs/gstreamer-libs-sections.txt: + * libs/gst/base/gstadapter.c: + * libs/gst/base/gstadapter.h: + * win32/common/libgstbase.def: + adapter: Add get variants of the buffer based take functions + Main difference to gst_adapter_map() for all practical purposes is that + GstMeta of the buffers will be preserved. + https://bugzilla.gnome.org/show_bug.cgi?id=742385 + +2015-06-29 17:03:10 +0200 Sebastian Dröge + + * libs/gst/base/gstadapter.c: + adapter: Copy over GstMeta from the input buffers to the output + All functions that return a GstBuffer or a list of them will now copy + all GstMeta from the input buffers except for meta with GST_META_FLAG_POOLED + flag or "memory" tag. + This is similar to the existing behaviour that the caller can't assume + anything about the buffer flags, timestamps or other metadata. And it's + also the same that gst_adapter_take_buffer_fast() did before, and what + gst_adapter_take_buffer() did if part of the first buffer or the complete + first buffer was requested. + https://bugzilla.gnome.org/show_bug.cgi?id=742385 + +2015-06-29 20:27:12 -0400 Olivier Crête + + * libs/gst/net/gstptpclock.c: + ptp: Init function can take a NULL interfaces array + +2015-06-29 13:57:11 +0900 Vineeth TM + + * tests/check/gst/gstcaps.c: + tests: caps: fix test_intersect_flagset failure + test_intersect_flagset fails because when caps is being + created, flags and mask are being cast to uint64 while + they should be uint. This results in invalid memory access + or a segfault. + https://bugzilla.gnome.org/show_bug.cgi?id=751628 + +2015-06-29 14:22:46 +0200 Thibault Saunier + + * scripts/gst-uninstalled: + scripts: Fix GST_VALIDATE_PLUGIN_PATH + It moved recently + +2015-06-29 13:58:04 +0200 Sebastian Dröge + + * libs/gst/base/gstbasetransform.h: + basetransform: Fix up documentation of transform_meta vfunc + By default we copy all metas that have no tags. + +2015-06-29 10:41:27 +0100 Tim-Philipp Müller + + * libs/gst/controller/gstdirectcontrolbinding.c: + * libs/gst/controller/gstdirectcontrolbinding.h: + directcontrolbinding: fix ABI break + Structure size was increased without adjustment of the padding. + https://bugzilla.gnome.org/show_bug.cgi?id=751622 + https://bugzilla.gnome.org/show_bug.cgi?id=740502 + +2015-03-19 15:55:14 +0530 Prashant Gotarne + + * gst/gsttask.c: + task: guard against NULL task function + https://bugzilla.gnome.org/show_bug.cgi?id=746439 + +2015-05-14 11:48:45 +0200 Miguel París Díaz + + * plugins/elements/gstfunnel.c: + * plugins/elements/gstfunnel.h: + funnel: add "forward-sticky-events" property + It is useful to avoid sending sticky event on stream changes. + https://bugzilla.gnome.org/show_bug.cgi?id=749315 + +2015-06-25 00:04:07 +0200 Sebastian Dröge + + * configure.ac: + Back to development + === release 1.5.2 === 2015-06-24 22:49:17 +0200 Sebastian Dröge diff --git a/NEWS b/NEWS index 1f6b3c7439..3e9a7796a9 100644 --- a/NEWS +++ b/NEWS @@ -1,2 +1,2 @@ -This is GStreamer 1.5.2 +This is GStreamer 1.5.90 diff --git a/RELEASE b/RELEASE index b4e5e468ac..b8900a8aef 100644 --- a/RELEASE +++ b/RELEASE @@ -1,17 +1,16 @@ -Release notes for GStreamer 1.5.2 +Release notes for GStreamer 1.5.90 -The GStreamer team is pleased to announce the second release of the unstable -1.5 release series. The 1.5 release series is adding new features on top of +The GStreamer team is pleased to announce the first release candidate for the +stable 1.6 release series. The 1.6 release series is adding new features on top of the 1.0, 1.2 and 1.4 series and is part of the API and ABI-stable 1.x release -series of the GStreamer multimedia framework. The unstable 1.5 release series -will lead to the stable 1.6 release series in the next weeks, and newly added -API can still change until that point. +series of the GStreamer multimedia framework. The final 1.6.0 release is planned +in the next few days unless any major bugs are found. -Binaries for Android, iOS, Mac OS X and Windows will be provided separately -during the unstable 1.5 release series. +Binaries for Android, iOS, Mac OS X and Windows will be provided separately by +the GStreamer project. @@ -38,23 +37,37 @@ contains a set of codecs plugins based on libav (formerly gst-ffmpeg) Bugs fixed in this release - * 740502 : Add absolute property to GstDirectControlBinding - * 740575 : Fixing DTS in GStreamer - * 745366 : concat: Forward FLUSH_START / FLUSH_STOP events - * 746949 : concat: Add active-pad property - * 750027 : concat: Reset internal start offset to 0 after flushing seek - * 750033 : basetransform - allow collation/separation of buffers - * 750039 : Keeping buffers with shared memory alive - * 750319 : memory: subclasses don't know map flags in unmap - * 750530 : ptp: FreeBSD, DragonFly and other BSDs don't have ifreq.ifw_hwaddr - * 750574 : netclientclock: Make the clock a wrapper clock around an internal clock - * 750761 : inputselector: Handle different duration track selection - * 750782 : pipeline: Add gst_pipeline_set_latency(), getter and GObject property - * 751026 : basesink: Properly handle buffer lists for the last-sample property - * 751047 : concat: Add adjust-base property - * 751107 : concat: when releasing pad, send EOS appropriately. - * 751235 : utils: get_compatible_pad does not fully respect filter caps - * 751420 : basesink: need to deep-copy last buffer list in drain + * 746385 : task: add function guards for gst_task_set_lock() + * 746431 : gsttask: function gst_task_join should do the argument verification before accessing GstTaskPrivate + * 746439 : task: guard against NULL task function in gst_task_new() + * 748643 : gstpad: Add a new GST_PROBE_HANDLED return value for probes + * 749590 : protection_meta: implement transform function + * 750149 : queuearray: allow storing of structs in addition to pointers (for GQueue optimisation) + * 750783 : baseparse: reverse playback in pull mode + * 751622 : test_ABI: failed ABI check + * 751628 : tests: caps: test_intersect_flagset failure + * 751712 : buffer: gst_buffer_copy_into() should probably not copy GST_META_FLAG_POOLED metadata + * 751819 : basesink: Shouldn't drop buffer when sync=false + * 751840 : inputselector: unnecessary check is always true + * 751881 : memory: Add missing field initializers to GstMapInfo + * 751916 : Add GstHarness test framework + * 752055 : identity: invalid read when unscheduling a gst_clock_id_wait + * 752092 : baseparse: Passes bogus buffer durations to subclass + * 752116 : adapter: failure of gst_adapter_get_(buffer_)list + * 752123 : harness: don't run code inside g_assert() + * 752493 : harness: Improve detection of element type + * 752494 : harness: Forward sticky events to sink harness + * 752498 : GstHarness improvements + * 752623 : concat: Test pipeline with uridecodebin and concat freezes sometimes when setting pipeline to state NULL + * 752662 : registry: Add plugins to the registry we are loading and not default one + * 752746 : harness: allow full control over event forwarding + * 752800 : basetransform: may return not-negotiation on shutdown + * 753011 : queue2: can not update upstream_size with valid data + * 753151 : gstpad: fix invalid object unref + * 753338 : value: free caps during failure + * 753455 : datetime: allow passing just a time to gst_date_time_new_from_iso8601_string() and default to " today " as date then + * 753538 : basetransform: remove unreachable return statement + * 753623 : pad: implement default handling of accept-caps using the template caps ==== Download ==== @@ -91,21 +104,32 @@ subscribe to the gstreamer-devel list. Contributors to this release - * Alison Chaiken - * Carlos Rafael Giani + * Arnaud Vrac + * Arun Raghavan * Edward Hervey - * Hyunjun + * Eunhae Choi + * George Kiagiadakis + * Havard Graff * Hyunjun Ko * Jan Schmidt - * Jonas Holmberg - * Lazar Claudiu + * Justin Joy + * Luis de Bethencourt * Mathieu Duponchelle - * Matthew Waters + * Miguel París Díaz * Nicolas Dufresne + * Nirbheek Chauhan + * Olivier Crête + * Philippe Normand + * Prashant Gotarne * Sebastian Dröge * Song Bing * Stefan Sauer + * Stian Selnes * Thiago Santos + * Thibault Saunier * Tim-Philipp Müller - * Руслан Ижбулатов + * Vineeth T M + * Vineeth TM + * Vivia Nikolaidou + * Wim Taymans   \ No newline at end of file diff --git a/configure.ac b/configure.ac index 433d4a5860..bd18632bbd 100644 --- a/configure.ac +++ b/configure.ac @@ -4,7 +4,7 @@ dnl initialize autoconf dnl when going to/from release please set the nano (fourth number) right ! dnl releases only do Wall, git and prerelease does Werror too dnl -AC_INIT([GStreamer],[1.5.2.1],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gstreamer]) +AC_INIT([GStreamer],[1.5.90],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gstreamer]) AG_GST_INIT dnl initialize automake (we require GNU make) @@ -62,7 +62,7 @@ dnl 1.2.5 => 205 dnl 1.10.9 (who knows) => 1009 dnl dnl sets GST_LT_LDFLAGS -AS_LIBTOOL(GST, 502, 0, 502) +AS_LIBTOOL(GST, 590, 0, 590) dnl *** autotools stuff **** diff --git a/docs/plugins/gstreamer-plugins.args b/docs/plugins/gstreamer-plugins.args index a59560e0c2..c9bb39caae 100644 --- a/docs/plugins/gstreamer-plugins.args +++ b/docs/plugins/gstreamer-plugins.args @@ -104,7 +104,7 @@ rwx Allow not linked -Return GTS_FLOW_OK even if there are not source pads or all are unlinked. +Return GST_FLOW_OK even if there are no source pads or they are all unlinked. FALSE diff --git a/docs/plugins/inspect/plugin-coreelements.xml b/docs/plugins/inspect/plugin-coreelements.xml index 150f57da24..b8b79a9aff 100644 --- a/docs/plugins/inspect/plugin-coreelements.xml +++ b/docs/plugins/inspect/plugin-coreelements.xml @@ -3,7 +3,7 @@ GStreamer core elements ../../plugins/elements/.libs/libgstcoreelements.so libgstcoreelements.so - 1.5.2 + 1.5.90 LGPL gstreamer GStreamer source release @@ -394,4 +394,4 @@ - + \ No newline at end of file diff --git a/gstreamer.doap b/gstreamer.doap index cf55ef878f..28fb56d9cd 100644 --- a/gstreamer.doap +++ b/gstreamer.doap @@ -38,6 +38,16 @@ hierarchy, and a set of media-agnostic core elements. + + + 1.5.90 + 1.5 + + 2015-08-19 + + + + 1.5.2 diff --git a/win32/common/config.h b/win32/common/config.h index 1587bbe1b1..60af8e7880 100644 --- a/win32/common/config.h +++ b/win32/common/config.h @@ -65,7 +65,7 @@ #define GST_PACKAGE_ORIGIN "Unknown package origin" /* GStreamer package release date/time for plugins as YYYY-MM-DD */ -#define GST_PACKAGE_RELEASE_DATETIME "2015-06-24" +#define GST_PACKAGE_RELEASE_DATETIME "2015-08-19" /* Define if static plugins should be built */ #undef GST_PLUGIN_BUILD_STATIC @@ -454,7 +454,7 @@ #define PACKAGE_NAME "GStreamer" /* Define to the full name and version of this package. */ -#define PACKAGE_STRING "GStreamer 1.5.2" +#define PACKAGE_STRING "GStreamer 1.5.90" /* Define to the one symbol short name of this package. */ #define PACKAGE_TARNAME "gstreamer" @@ -463,7 +463,7 @@ #undef PACKAGE_URL /* Define to the version of this package. */ -#define PACKAGE_VERSION "1.5.2" +#define PACKAGE_VERSION "1.5.90" /* directory where plugins are located */ #ifdef _DEBUG @@ -507,7 +507,7 @@ #undef USE_POISONING /* Version number of package */ -#define VERSION "1.5.2" +#define VERSION "1.5.90" /* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel). */ diff --git a/win32/common/gstenumtypes.c b/win32/common/gstenumtypes.c index 701312c265..a29942a136 100644 --- a/win32/common/gstenumtypes.c +++ b/win32/common/gstenumtypes.c @@ -1272,6 +1272,7 @@ gst_pad_probe_return_get_type (void) {C_ENUM (GST_PAD_PROBE_OK), "GST_PAD_PROBE_OK", "ok"}, {C_ENUM (GST_PAD_PROBE_REMOVE), "GST_PAD_PROBE_REMOVE", "remove"}, {C_ENUM (GST_PAD_PROBE_PASS), "GST_PAD_PROBE_PASS", "pass"}, + {C_ENUM (GST_PAD_PROBE_HANDLED), "GST_PAD_PROBE_HANDLED", "handled"}, {0, NULL, NULL} }; @@ -1308,6 +1309,8 @@ gst_pad_flags_get_type (void) "proxy-scheduling"}, {C_FLAGS (GST_PAD_FLAG_ACCEPT_INTERSECT), "GST_PAD_FLAG_ACCEPT_INTERSECT", "accept-intersect"}, + {C_FLAGS (GST_PAD_FLAG_ACCEPT_TEMPLATE), "GST_PAD_FLAG_ACCEPT_TEMPLATE", + "accept-template"}, {C_FLAGS (GST_PAD_FLAG_LAST), "GST_PAD_FLAG_LAST", "last"}, {0, NULL, NULL} }; diff --git a/win32/common/gstversion.h b/win32/common/gstversion.h index 8d4187f5ec..dc4c39823a 100644 --- a/win32/common/gstversion.h +++ b/win32/common/gstversion.h @@ -23,6 +23,8 @@ #ifndef __GST_VERSION_H__ #define __GST_VERSION_H__ +#include + /** * SECTION:gstversion * @short_description: GStreamer version macros. @@ -58,7 +60,7 @@ G_BEGIN_DECLS * * The micro version of GStreamer at compile time: */ -#define GST_VERSION_MICRO (2) +#define GST_VERSION_MICRO (90) /** * GST_VERSION_NANO: * -- cgit v1.2.3