Release 1.2.21.2.2

5 files changed, 94 insertions, 11 deletions

diff --git a/ChangeLog b/ChangeLog
index d1c26ac..28dc75c 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,9 +1,80 @@
+=== release 1.2.2 ===
+
+2013-12-26  Sebastian Dröge <slomo@coaxion.net>
+
+	* configure.ac:
+	  releasing 1.2.2
+
+2013-12-07 11:35:09 +0100  Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+	* ext/libav/gstavviddec.c:
+	  avviddec: improve buffer handling and semantics
+	  ... so as to focus on providing *a* buffer rather than one (too) tied
+	  to a frame, in particular allowing multiple allocations related to a frame.
+	  Fixes https://bugzilla.gnome.org/show_bug.cgi?id=697806
+
+2013-11-26 20:57:37 +0100  Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+	* ext/libav/gstavviddec.c:
+	  avviddec: discard unused input frames
+	  ... to avoid these piling up in list of pending frames.
+	  Fixes https://bugzilla.gnome.org/show_bug.cgi?id=693772
+
+2013-11-26 20:55:43 +0100  Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+	* ext/libav/gstavviddec.c:
+	  avviddec: really release frame at proper time
+	  ... by also removing it from the pending list of frames,
+	  where it may still be in if it has never been submitted to _finish.
+	  This could happen if is a decode-only frame, or in skipped decoding
+	  situation, ...
+	  Fixes https://bugzilla.gnome.org/show_bug.cgi?id=693772
+
+2013-12-07 12:10:13 +0100  Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+	* ext/libav/gstavvidenc.c:
+	  avvidenc: plug input_state leak
+
+2013-12-02 20:21:34 +0100  Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+	* ext/libav/gstavviddec.c:
+	  avviddec: only use upstream framerate if really specified
+	  Fixes https://bugzilla.gnome.org/show_bug.cgi?id=704161
+
+2013-10-26 09:34:30 +0100  Tim-Philipp Müller <tim@centricular.com>
+
+	* ext/libav/gstavaudenc.c:
+	  avaudenc: post better error message if experimental codecs don't work
+	  https://bugzilla.gnome.org/show_bug.cgi?id=691617
+
+2013-10-26 09:09:28 +0100  Tim-Philipp Müller <tim@centricular.com>
+
+	* ext/libav/gstavcodecmap.c:
+	  codecmap: use TRUE for boolean fields in caps
+
+2013-10-14 14:50:57 -0600  Greg Rutz <greg@gsr-tek.com>
+
+	* ext/libav/gstavaudenc.c:
+	* ext/libav/gstavaudenc.h:
+	* ext/libav/gstavcodecmap.c:
+	* ext/libav/gstavcodecmap.h:
+	* ext/libav/gstavvidenc.c:
+	* ext/libav/gstavvidenc.h:
+	  avenc: Add compliance property
+	  Add a new property to GstFFMpegVidEnc and GstFFMpegAudEnc to supply
+	  the "strict compliance" value to AVCodecContext
+	  https://bugzilla.gnome.org/show_bug.cgi?id=691617
+
 === release 1.2.1 ===
 
-2013-11-09  Sebastian Dröge <slomo@coaxion.net>
+2013-11-09 16:02:14 +0100  Sebastian Dröge <sebastian@centricular.com>
 
+	* ChangeLog:
+	* NEWS:
+	* RELEASE:
 	* configure.ac:
-	  releasing 1.2.1
+	* gst-libav.doap:
+	  Release 1.2.1
 
 2013-11-04 23:20:17 +0000  Tim-Philipp Müller <tim@centricular.com>
 
diff --git a/NEWS b/NEWS
index 4ce6afb..18ce783 100644
--- a/NEWS
+++ b/NEWS
@@ -1,2 +1,2 @@
-This is GStreamer Libav Plugins 1.2.1
+This is GStreamer Libav Plugins 1.2.2
 
diff --git a/RELEASE b/RELEASE
index 4c8b6be..bfe098f 100644
--- a/RELEASE
+++ b/RELEASE
@@ -1,5 +1,5 @@
 
-Release notes for GStreamer libav Plugins 1.2.1
+Release notes for GStreamer libav Plugins 1.2.2
 
 The GStreamer team is proud to announce a new bug-fix release
 in the 1.x stable series of the
@@ -38,8 +38,10 @@ contains a set of less supported plugins that haven't passed the
 
 Bugs fixed in this release
      
-      * 708732 : avvidenc: Don't fail configuring codec if framerate is unknown
-      * 708769 : avdec_mp2float: negotiation error
+      * 691617 : avenc_aac: errors out with " encoder not initialized " 
+      * 693772 : avdec: decoder frame list getting long
+      * 697806 : avdec_h264 Fails during error recovery after packet loss leading to stream corruption
+      * 704161 : avviddec: should use upstream fps only if valid
 
 ==== Download ====
 
@@ -76,7 +78,7 @@ subscribe to the gstreamer-devel list.
         
 Contributors to this release
     
-      * Matthieu Bouron
-      * Sebastian Dröge
+      * Greg Rutz
+      * Mark Nauwelaerts
       * Tim-Philipp Müller
  
\ No newline at end of file
diff --git a/configure.ac b/configure.ac
index eb3e481..c1066ee 100644
--- a/configure.ac
+++ b/configure.ac
@@ -3,7 +3,7 @@ AC_PREREQ(2.62)
 dnl initialize autoconf
 dnl when going to/from release please set the nano (fourth number) right !
 dnl releases only do Wall, cvs and prerelease does Werror too
-AC_INIT(GStreamer libav, 1.2.1,
+AC_INIT(GStreamer libav, 1.2.2,
     http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer,
     gst-libav)
 
@@ -42,11 +42,11 @@ GST_API_VERSION=1.0
 AC_SUBST(GST_API_VERSION)
 
 AG_GST_LIBTOOL_PREPARE
-AS_LIBTOOL(GST, 201, 0, 201)
+AS_LIBTOOL(GST, 202, 0, 202)
 
 dnl *** required versions of GStreamer stuff ***
 GST_REQ=1.2.0
-GST_PBREQ=1.2.0
+GST_PBREQ=1.2.2
 
 ORC_REQ=0.4.16
 ORC_CHECK([$ORC_REQ])
diff --git a/gst-libav.doap b/gst-libav.doap
index c15530e..02f040d 100644
--- a/gst-libav.doap
+++ b/gst-libav.doap
@@ -34,6 +34,16 @@ colorspace conversion elements.
 
  <release>
   <Version>
+   <revision>1.2.2</revision>
+   <branch>1.2</branch>
+   <name></name>
+   <created>2013-12-26</created>
+   <file-release rdf:resource="http://gstreamer.freedesktop.org/src/gst-libav/gst-libav-1.2.2.tar.xz" />
+  </Version>
+ </release>
+
+ <release>
+  <Version>
    <revision>1.2.1</revision>
    <branch>1.2</branch>
    <name></name>