/* -*- Mode: C; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4 -*- */

/*
 * Dan Williams <dcbw@redhat.com>
 * Tambet Ingo <tambet@gmail.com>
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the
 * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
 * Boston, MA 02110-1301 USA.
 *
 * (C) Copyright 2007 - 2011 Red Hat, Inc.
 * (C) Copyright 2007 - 2008 Novell, Inc.
 */

#include <string.h>

#include "nm-setting-serial.h"
#include "nm-glib-compat.h"
#include "nm-setting-private.h"

/**
 * SECTION:nm-setting-serial
 * @short_description: Describes connection properties for devices that use
 * serial communications
 * @include: nm-setting-serial.h
 *
 * The #NMSettingSerial object is a #NMSetting subclass that describes
 * properties necessary for connections that may use serial communications,
 * such as mobile broadband or analog telephone connections.
 **/

/**
 * nm_setting_serial_error_quark:
 *
 * Registers an error quark for #NMSettingSerial if necessary.
 *
 * Returns: the error quark used for #NMSettingSerial errors.
 **/
GQuark
nm_setting_serial_error_quark (void)
{
	static GQuark quark;

	if (G_UNLIKELY (!quark))
		quark = g_quark_from_static_string ("nm-setting-serial-error-quark");
	return quark;
}


G_DEFINE_TYPE_WITH_CODE (NMSettingSerial, nm_setting_serial, NM_TYPE_SETTING,
                         _nm_register_setting (NM_SETTING_SERIAL_SETTING_NAME,
                                               g_define_type_id,
                                               2,
                                               NM_SETTING_SERIAL_ERROR))
NM_SETTING_REGISTER_TYPE (NM_TYPE_SETTING_SERIAL)

#define NM_SETTING_SERIAL_GET_PRIVATE(o) (G_TYPE_INSTANCE_GET_PRIVATE ((o), NM_TYPE_SETTING_SERIAL, NMSettingSerialPrivate))

typedef struct {
	guint baud;
	guint bits;
	char parity;
	guint stopbits;
	guint64 send_delay;
} NMSettingSerialPrivate;


enum {
	PROP_0,
	PROP_BAUD,
	PROP_BITS,
	PROP_PARITY,
	PROP_STOPBITS,
	PROP_SEND_DELAY,

	LAST_PROP
};

/**
 * nm_setting_serial_new:
 *
 * Creates a new #NMSettingSerial object with default values.
 *
 * Returns: (transfer full): the new empty #NMSettingSerial object
 **/
NMSetting *
nm_setting_serial_new (void)
{
	return (NMSetting *) g_object_new (NM_TYPE_SETTING_SERIAL, NULL);
}

/**
 * nm_setting_serial_get_baud:
 * @setting: the #NMSettingSerial
 *
 * Returns: the #NMSettingSerial:baud property of the setting
 **/
guint
nm_setting_serial_get_baud (NMSettingSerial *setting)
{
	g_return_val_if_fail (NM_IS_SETTING_SERIAL (setting), 0);

	return NM_SETTING_SERIAL_GET_PRIVATE (setting)->baud;
}

/**
 * nm_setting_serial_get_bits:
 * @setting: the #NMSettingSerial
 *
 * Returns: the #NMSettingSerial:bits property of the setting
 **/
guint
nm_setting_serial_get_bits (NMSettingSerial *setting)
{
	g_return_val_if_fail (NM_IS_SETTING_SERIAL (setting), 0);

	return NM_SETTING_SERIAL_GET_PRIVATE (setting)->bits;
}

/**
 * nm_setting_serial_get_parity:
 * @setting: the #NMSettingSerial
 *
 * Returns: the #NMSettingSerial:parity property of the setting
 **/
char
nm_setting_serial_get_parity (NMSettingSerial *setting)
{
	g_return_val_if_fail (NM_IS_SETTING_SERIAL (setting), 0);

	return NM_SETTING_SERIAL_GET_PRIVATE (setting)->parity;
}

/**
 * nm_setting_serial_get_stopbits:
 * @setting: the #NMSettingSerial
 *
 * Returns: the #NMSettingSerial:stopbits property of the setting
 **/
guint
nm_setting_serial_get_stopbits (NMSettingSerial *setting)
{
	g_return_val_if_fail (NM_IS_SETTING_SERIAL (setting), 0);

	return NM_SETTING_SERIAL_GET_PRIVATE (setting)->stopbits;
}

/**
 * nm_setting_serial_get_send_delay:
 * @setting: the #NMSettingSerial
 *
 * Returns: the #NMSettingSerial:send-delay property of the setting
 **/
guint64
nm_setting_serial_get_send_delay (NMSettingSerial *setting)
{
	g_return_val_if_fail (NM_IS_SETTING_SERIAL (setting), 0);

	return NM_SETTING_SERIAL_GET_PRIVATE (setting)->send_delay;
}

static gboolean
verify (NMSetting *setting, GSList *all_settings, GError **error)
{
	return TRUE;
}

static void
nm_setting_serial_init (NMSettingSerial *setting)
{
	g_object_set (setting, NM_SETTING_NAME, NM_SETTING_SERIAL_SETTING_NAME, NULL);
}

static void
set_property (GObject *object, guint prop_id,
		    const GValue *value, GParamSpec *pspec)
{
	NMSettingSerialPrivate *priv = NM_SETTING_SERIAL_GET_PRIVATE (object);

	switch (prop_id) {
	case PROP_BAUD:
		priv->baud = g_value_get_uint (value);
		break;
	case PROP_BITS:
		priv->bits = g_value_get_uint (value);
		break;
	case PROP_PARITY:
		priv->parity = g_value_get_schar (value);
		break;
	case PROP_STOPBITS:
		priv->stopbits = g_value_get_uint (value);
		break;
	case PROP_SEND_DELAY:
		priv->send_delay = g_value_get_uint64 (value);
		break;
	default:
		G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
		break;
	}
}

static void
get_property (GObject *object, guint prop_id,
		    GValue *value, GParamSpec *pspec)
{
	NMSettingSerial *setting = NM_SETTING_SERIAL (object);

	switch (prop_id) {
	case PROP_BAUD:
		g_value_set_uint (value, nm_setting_serial_get_baud (setting));
		break;
	case PROP_BITS:
		g_value_set_uint (value, nm_setting_serial_get_bits (setting));
		break;
	case PROP_PARITY:
		g_value_set_schar (value, nm_setting_serial_get_parity (setting));
		break;
	case PROP_STOPBITS:
		g_value_set_uint (value, nm_setting_serial_get_stopbits (setting));
		break;
	case PROP_SEND_DELAY:
		g_value_set_uint64 (value, nm_setting_serial_get_send_delay (setting));
		break;
	default:
		G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
		break;
	}
}

static void
nm_setting_serial_class_init (NMSettingSerialClass *setting_class)
{
	GObjectClass *object_class = G_OBJECT_CLASS (setting_class);
	NMSettingClass *parent_class = NM_SETTING_CLASS (setting_class);

	g_type_class_add_private (setting_class, sizeof (NMSettingSerialPrivate));

	/* virtual methods */
	object_class->set_property = set_property;
	object_class->get_property = get_property;
	parent_class->verify       = verify;

	/* Properties */

	/**
	 * NMSettingSerial:baud:
	 *
	 * Speed to use for communication over the serial port.  Note that this value
	 * usually has no effect for mobile broadband modems as they generally
	 * ignore speed settings and use the highest available speed.
	 **/
	g_object_class_install_property
		(object_class, PROP_BAUD,
		 g_param_spec_uint (NM_SETTING_SERIAL_BAUD,
						"Baud",
						"Speed to use for communication over the serial port.  "
						"Note that this value usually has no effect for mobile "
						"broadband modems as they generally ignore speed "
						"settings and use the highest available speed.",
						0, G_MAXUINT, 57600,
						G_PARAM_READWRITE | G_PARAM_CONSTRUCT));

	/**
	 * NMSettingSerial:bits:
	 *
	 * Byte-width of the serial communication.
	 **/
	g_object_class_install_property
		(object_class, PROP_BITS,
		 g_param_spec_uint (NM_SETTING_SERIAL_BITS,
						"Bits",
						"Byte-width of the serial communication.  The 8 in "
						"'8n1' for example.",
						5, 8, 8,
						G_PARAM_READWRITE | G_PARAM_CONSTRUCT));

	/**
	 * NMSettingSerial:parity:
	 *
	 * Parity setting of the serial port.  Either 'E' for even parity, 'o' for
	 * odd parity, or 'n' for no parity.
	 **/
	g_object_class_install_property
		(object_class, PROP_PARITY,
		 g_param_spec_char (NM_SETTING_SERIAL_PARITY,
						"Parity",
						"Parity setting of the serial port.  Either 'E' for even "
						"parity, 'o' for odd parity, or 'n' for no parity.",
						'E', 'o', 'n',
						G_PARAM_READWRITE | G_PARAM_CONSTRUCT));

	/**
	 * NMSettingSerial:stopbits:
	 *
	 * Number of stop bits for communication on the serial port.  Either 1 or 2.
	 * The 1 in '8n1' for example.
	 **/
	g_object_class_install_property
		(object_class, PROP_STOPBITS,
		 g_param_spec_uint (NM_SETTING_SERIAL_STOPBITS,
						"Stopbits",
						"Number of stop bits for communication on the serial "
						"port.  Either 1 or 2.  The 1 in '8n1' for example.",
						1, 2, 1,
						G_PARAM_READWRITE | G_PARAM_CONSTRUCT));

	/**
	 * NMSettingSerial:send-delay:
	 *
	 * Time to delay between each byte sent to the modem, in microseconds.
	 **/
	g_object_class_install_property
		(object_class, PROP_SEND_DELAY,
		 g_param_spec_uint64 (NM_SETTING_SERIAL_SEND_DELAY,
						  "SendDelay",
						  "Time to delay between each byte sent to the modem, "
						  "in microseconds.",
						  0, G_MAXUINT64, 0,
						  G_PARAM_READWRITE | G_PARAM_CONSTRUCT));
}